drm/i915: Disable LP1+ watermarks safely in init
ILK doesn't like if we just write the LP1+ watermarks registers with 0.
We need to just disable the watermarks by clearing the enable bit. Use
that method also when disabling LP1+ watermarks in init_clock_gating.
It looks like disabling the sprite LP1 watermarks can cause underruns
even if we just toggle the WM1S_LP_EN bit. So treat that bit like the
actual watermark numbers and avoid setting it to 0 immediately.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 276e98d..e321fbc 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5051,6 +5051,20 @@
}
}
+static void ilk_init_lp_watermarks(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ I915_WRITE(WM3_LP_ILK, I915_READ(WM3_LP_ILK) & ~WM1_LP_SR_EN);
+ I915_WRITE(WM2_LP_ILK, I915_READ(WM2_LP_ILK) & ~WM1_LP_SR_EN);
+ I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN);
+
+ /*
+ * Don't touch WM1S_LP_EN here.
+ * Doing so could cause underruns.
+ */
+}
+
static void ironlake_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5084,9 +5098,8 @@
I915_WRITE(DISP_ARB_CTL,
(I915_READ(DISP_ARB_CTL) |
DISP_FBC_WM_DIS));
- I915_WRITE(WM3_LP_ILK, 0);
- I915_WRITE(WM2_LP_ILK, 0);
- I915_WRITE(WM1_LP_ILK, 0);
+
+ ilk_init_lp_watermarks(dev);
/*
* Based on the document from hardware guys the following bits
@@ -5193,9 +5206,7 @@
I915_WRITE(GEN6_GT_MODE,
_MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE));
- I915_WRITE(WM3_LP_ILK, 0);
- I915_WRITE(WM2_LP_ILK, 0);
- I915_WRITE(WM1_LP_ILK, 0);
+ ilk_init_lp_watermarks(dev);
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
@@ -5369,9 +5380,7 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
- I915_WRITE(WM3_LP_ILK, 0);
- I915_WRITE(WM2_LP_ILK, 0);
- I915_WRITE(WM1_LP_ILK, 0);
+ ilk_init_lp_watermarks(dev);
/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
* This implements the WaDisableRCZUnitClockGating:hsw workaround.
@@ -5420,9 +5429,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t snpcr;
- I915_WRITE(WM3_LP_ILK, 0);
- I915_WRITE(WM2_LP_ILK, 0);
- I915_WRITE(WM1_LP_ILK, 0);
+ ilk_init_lp_watermarks(dev);
I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE);