Thomas Gleixner | c942fdd | 2019-05-27 08:55:06 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 2 | /* |
| 3 | * TAS5086 ASoC codec driver |
| 4 | * |
| 5 | * Copyright (c) 2013 Daniel Mack <zonque@gmail.com> |
| 6 | * |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 7 | * TODO: |
| 8 | * - implement DAPM and input muxing |
| 9 | * - implement modulation limit |
| 10 | * - implement non-default PWM start |
| 11 | * |
| 12 | * Note that this chip has a very unusual register layout, specifically |
| 13 | * because the registers are of unequal size, and multi-byte registers |
| 14 | * require bulk writes to take effect. Regmap does not support that kind |
| 15 | * of devices. |
| 16 | * |
| 17 | * Currently, the driver does not touch any of the registers >= 0x20, so |
| 18 | * it doesn't matter because the entire map can be accessed as 8-bit |
| 19 | * array. In case more features will be added in the future |
| 20 | * that require access to higher registers, the entire regmap H/W I/O |
| 21 | * routines have to be open-coded. |
| 22 | */ |
| 23 | |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/slab.h> |
| 26 | #include <linux/delay.h> |
| 27 | #include <linux/gpio.h> |
| 28 | #include <linux/i2c.h> |
| 29 | #include <linux/regmap.h> |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 30 | #include <linux/regulator/consumer.h> |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 31 | #include <linux/spi/spi.h> |
Sachin Kamat | 285d00c | 2013-10-11 17:23:59 +0530 | [diff] [blame] | 32 | #include <linux/of.h> |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 33 | #include <linux/of_device.h> |
| 34 | #include <linux/of_gpio.h> |
| 35 | #include <sound/pcm.h> |
| 36 | #include <sound/pcm_params.h> |
| 37 | #include <sound/soc.h> |
| 38 | #include <sound/tlv.h> |
| 39 | #include <sound/tas5086.h> |
| 40 | |
| 41 | #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ |
| 42 | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| 43 | SNDRV_PCM_FMTBIT_S24_3LE) |
| 44 | |
| 45 | #define TAS5086_PCM_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ |
| 46 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ |
| 47 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ |
| 48 | SNDRV_PCM_RATE_192000) |
| 49 | |
| 50 | /* |
| 51 | * TAS5086 registers |
| 52 | */ |
| 53 | #define TAS5086_CLOCK_CONTROL 0x00 /* Clock control register */ |
| 54 | #define TAS5086_CLOCK_RATE(val) (val << 5) |
| 55 | #define TAS5086_CLOCK_RATE_MASK (0x7 << 5) |
| 56 | #define TAS5086_CLOCK_RATIO(val) (val << 2) |
| 57 | #define TAS5086_CLOCK_RATIO_MASK (0x7 << 2) |
| 58 | #define TAS5086_CLOCK_SCLK_RATIO_48 (1 << 1) |
| 59 | #define TAS5086_CLOCK_VALID (1 << 0) |
| 60 | |
| 61 | #define TAS5086_DEEMPH_MASK 0x03 |
| 62 | #define TAS5086_SOFT_MUTE_ALL 0x3f |
| 63 | |
| 64 | #define TAS5086_DEV_ID 0x01 /* Device ID register */ |
| 65 | #define TAS5086_ERROR_STATUS 0x02 /* Error status register */ |
| 66 | #define TAS5086_SYS_CONTROL_1 0x03 /* System control register 1 */ |
| 67 | #define TAS5086_SERIAL_DATA_IF 0x04 /* Serial data interface register */ |
| 68 | #define TAS5086_SYS_CONTROL_2 0x05 /* System control register 2 */ |
| 69 | #define TAS5086_SOFT_MUTE 0x06 /* Soft mute register */ |
| 70 | #define TAS5086_MASTER_VOL 0x07 /* Master volume */ |
| 71 | #define TAS5086_CHANNEL_VOL(X) (0x08 + (X)) /* Channel 1-6 volume */ |
| 72 | #define TAS5086_VOLUME_CONTROL 0x09 /* Volume control register */ |
| 73 | #define TAS5086_MOD_LIMIT 0x10 /* Modulation limit register */ |
| 74 | #define TAS5086_PWM_START 0x18 /* PWM start register */ |
| 75 | #define TAS5086_SURROUND 0x19 /* Surround register */ |
| 76 | #define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */ |
| 77 | #define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */ |
| 78 | #define TAS5086_BKNDERR 0x1c |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 79 | #define TAS5086_INPUT_MUX 0x20 |
| 80 | #define TAS5086_PWM_OUTPUT_MUX 0x25 |
| 81 | |
| 82 | #define TAS5086_MAX_REGISTER TAS5086_PWM_OUTPUT_MUX |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 83 | |
Daniel Mack | 79b23b5 | 2013-06-24 16:25:32 +0200 | [diff] [blame] | 84 | #define TAS5086_PWM_START_MIDZ_FOR_START_1 (1 << 7) |
| 85 | #define TAS5086_PWM_START_MIDZ_FOR_START_2 (1 << 6) |
| 86 | #define TAS5086_PWM_START_CHANNEL_MASK (0x3f) |
| 87 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 88 | /* |
| 89 | * Default TAS5086 power-up configuration |
| 90 | */ |
| 91 | static const struct reg_default tas5086_reg_defaults[] = { |
| 92 | { 0x00, 0x6c }, |
| 93 | { 0x01, 0x03 }, |
| 94 | { 0x02, 0x00 }, |
| 95 | { 0x03, 0xa0 }, |
| 96 | { 0x04, 0x05 }, |
| 97 | { 0x05, 0x60 }, |
| 98 | { 0x06, 0x00 }, |
| 99 | { 0x07, 0xff }, |
| 100 | { 0x08, 0x30 }, |
| 101 | { 0x09, 0x30 }, |
| 102 | { 0x0a, 0x30 }, |
| 103 | { 0x0b, 0x30 }, |
| 104 | { 0x0c, 0x30 }, |
| 105 | { 0x0d, 0x30 }, |
| 106 | { 0x0e, 0xb1 }, |
| 107 | { 0x0f, 0x00 }, |
| 108 | { 0x10, 0x02 }, |
| 109 | { 0x11, 0x00 }, |
| 110 | { 0x12, 0x00 }, |
| 111 | { 0x13, 0x00 }, |
| 112 | { 0x14, 0x00 }, |
| 113 | { 0x15, 0x00 }, |
| 114 | { 0x16, 0x00 }, |
| 115 | { 0x17, 0x00 }, |
| 116 | { 0x18, 0x3f }, |
| 117 | { 0x19, 0x00 }, |
| 118 | { 0x1a, 0x18 }, |
| 119 | { 0x1b, 0x82 }, |
| 120 | { 0x1c, 0x05 }, |
| 121 | }; |
| 122 | |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 123 | static int tas5086_register_size(struct device *dev, unsigned int reg) |
| 124 | { |
| 125 | switch (reg) { |
Daniel Mack | 9f24dc8 | 2013-06-27 21:59:10 +0200 | [diff] [blame] | 126 | case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR: |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 127 | return 1; |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 128 | case TAS5086_INPUT_MUX: |
| 129 | case TAS5086_PWM_OUTPUT_MUX: |
| 130 | return 4; |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 131 | } |
| 132 | |
| 133 | dev_err(dev, "Unsupported register address: %d\n", reg); |
| 134 | return 0; |
| 135 | } |
| 136 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 137 | static bool tas5086_accessible_reg(struct device *dev, unsigned int reg) |
| 138 | { |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 139 | switch (reg) { |
| 140 | case 0x0f: |
| 141 | case 0x11 ... 0x17: |
| 142 | case 0x1d ... 0x1f: |
| 143 | return false; |
| 144 | default: |
| 145 | return true; |
| 146 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 147 | } |
| 148 | |
| 149 | static bool tas5086_volatile_reg(struct device *dev, unsigned int reg) |
| 150 | { |
| 151 | switch (reg) { |
| 152 | case TAS5086_DEV_ID: |
| 153 | case TAS5086_ERROR_STATUS: |
| 154 | return true; |
| 155 | } |
| 156 | |
| 157 | return false; |
| 158 | } |
| 159 | |
| 160 | static bool tas5086_writeable_reg(struct device *dev, unsigned int reg) |
| 161 | { |
| 162 | return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID); |
| 163 | } |
| 164 | |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 165 | static int tas5086_reg_write(void *context, unsigned int reg, |
| 166 | unsigned int value) |
| 167 | { |
| 168 | struct i2c_client *client = context; |
| 169 | unsigned int i, size; |
| 170 | uint8_t buf[5]; |
| 171 | int ret; |
| 172 | |
| 173 | size = tas5086_register_size(&client->dev, reg); |
| 174 | if (size == 0) |
| 175 | return -EINVAL; |
| 176 | |
| 177 | buf[0] = reg; |
| 178 | |
| 179 | for (i = size; i >= 1; --i) { |
| 180 | buf[i] = value; |
| 181 | value >>= 8; |
| 182 | } |
| 183 | |
| 184 | ret = i2c_master_send(client, buf, size + 1); |
| 185 | if (ret == size + 1) |
| 186 | return 0; |
| 187 | else if (ret < 0) |
| 188 | return ret; |
| 189 | else |
| 190 | return -EIO; |
| 191 | } |
| 192 | |
| 193 | static int tas5086_reg_read(void *context, unsigned int reg, |
| 194 | unsigned int *value) |
| 195 | { |
| 196 | struct i2c_client *client = context; |
| 197 | uint8_t send_buf, recv_buf[4]; |
| 198 | struct i2c_msg msgs[2]; |
| 199 | unsigned int size; |
| 200 | unsigned int i; |
| 201 | int ret; |
| 202 | |
| 203 | size = tas5086_register_size(&client->dev, reg); |
| 204 | if (size == 0) |
| 205 | return -EINVAL; |
| 206 | |
| 207 | send_buf = reg; |
| 208 | |
| 209 | msgs[0].addr = client->addr; |
| 210 | msgs[0].len = sizeof(send_buf); |
| 211 | msgs[0].buf = &send_buf; |
| 212 | msgs[0].flags = 0; |
| 213 | |
| 214 | msgs[1].addr = client->addr; |
| 215 | msgs[1].len = size; |
| 216 | msgs[1].buf = recv_buf; |
| 217 | msgs[1].flags = I2C_M_RD; |
| 218 | |
| 219 | ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| 220 | if (ret < 0) |
| 221 | return ret; |
| 222 | else if (ret != ARRAY_SIZE(msgs)) |
| 223 | return -EIO; |
| 224 | |
| 225 | *value = 0; |
| 226 | |
| 227 | for (i = 0; i < size; i++) { |
| 228 | *value <<= 8; |
| 229 | *value |= recv_buf[i]; |
| 230 | } |
| 231 | |
| 232 | return 0; |
| 233 | } |
| 234 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 235 | static const char * const supply_names[] = { |
| 236 | "dvdd", "avdd" |
| 237 | }; |
| 238 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 239 | struct tas5086_private { |
| 240 | struct regmap *regmap; |
| 241 | unsigned int mclk, sclk; |
| 242 | unsigned int format; |
| 243 | bool deemph; |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 244 | unsigned int charge_period; |
| 245 | unsigned int pwm_start_mid_z; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 246 | /* Current sample rate for de-emphasis control */ |
| 247 | int rate; |
| 248 | /* GPIO driving Reset pin, if any */ |
| 249 | int gpio_nreset; |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 250 | struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 251 | }; |
| 252 | |
| 253 | static int tas5086_deemph[] = { 0, 32000, 44100, 48000 }; |
| 254 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 255 | static int tas5086_set_deemph(struct snd_soc_component *component) |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 256 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 257 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 258 | int i, val = 0; |
| 259 | |
Axel Lin | 9425e9d | 2015-07-23 23:13:36 +0800 | [diff] [blame] | 260 | if (priv->deemph) { |
| 261 | for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) { |
| 262 | if (tas5086_deemph[i] == priv->rate) { |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 263 | val = i; |
Axel Lin | 9425e9d | 2015-07-23 23:13:36 +0800 | [diff] [blame] | 264 | break; |
| 265 | } |
| 266 | } |
| 267 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 268 | |
| 269 | return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1, |
| 270 | TAS5086_DEEMPH_MASK, val); |
| 271 | } |
| 272 | |
| 273 | static int tas5086_get_deemph(struct snd_kcontrol *kcontrol, |
| 274 | struct snd_ctl_elem_value *ucontrol) |
| 275 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 276 | struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| 277 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 278 | |
Takashi Iwai | 4c523ef | 2015-03-10 12:39:08 +0100 | [diff] [blame] | 279 | ucontrol->value.integer.value[0] = priv->deemph; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 280 | |
| 281 | return 0; |
| 282 | } |
| 283 | |
| 284 | static int tas5086_put_deemph(struct snd_kcontrol *kcontrol, |
| 285 | struct snd_ctl_elem_value *ucontrol) |
| 286 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 287 | struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| 288 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 289 | |
Takashi Iwai | 4c523ef | 2015-03-10 12:39:08 +0100 | [diff] [blame] | 290 | priv->deemph = ucontrol->value.integer.value[0]; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 291 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 292 | return tas5086_set_deemph(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 293 | } |
| 294 | |
| 295 | |
| 296 | static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai, |
| 297 | int clk_id, unsigned int freq, int dir) |
| 298 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 299 | struct snd_soc_component *component = codec_dai->component; |
| 300 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 301 | |
| 302 | switch (clk_id) { |
| 303 | case TAS5086_CLK_IDX_MCLK: |
| 304 | priv->mclk = freq; |
| 305 | break; |
| 306 | case TAS5086_CLK_IDX_SCLK: |
| 307 | priv->sclk = freq; |
| 308 | break; |
| 309 | } |
| 310 | |
| 311 | return 0; |
| 312 | } |
| 313 | |
| 314 | static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai, |
| 315 | unsigned int format) |
| 316 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 317 | struct snd_soc_component *component = codec_dai->component; |
| 318 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 319 | |
| 320 | /* The TAS5086 can only be slave to all clocks */ |
| 321 | if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 322 | dev_err(component->dev, "Invalid clocking mode\n"); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 323 | return -EINVAL; |
| 324 | } |
| 325 | |
| 326 | /* we need to refer to the data format from hw_params() */ |
| 327 | priv->format = format; |
| 328 | |
| 329 | return 0; |
| 330 | } |
| 331 | |
| 332 | static const int tas5086_sample_rates[] = { |
| 333 | 32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000 |
| 334 | }; |
| 335 | |
| 336 | static const int tas5086_ratios[] = { |
| 337 | 64, 128, 192, 256, 384, 512 |
| 338 | }; |
| 339 | |
| 340 | static int index_in_array(const int *array, int len, int needle) |
| 341 | { |
| 342 | int i; |
| 343 | |
| 344 | for (i = 0; i < len; i++) |
| 345 | if (array[i] == needle) |
| 346 | return i; |
| 347 | |
| 348 | return -ENOENT; |
| 349 | } |
| 350 | |
| 351 | static int tas5086_hw_params(struct snd_pcm_substream *substream, |
| 352 | struct snd_pcm_hw_params *params, |
| 353 | struct snd_soc_dai *dai) |
| 354 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 355 | struct snd_soc_component *component = dai->component; |
| 356 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Dan Carpenter | 28dbd16 | 2013-03-13 08:32:53 +0300 | [diff] [blame] | 357 | int val; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 358 | int ret; |
| 359 | |
| 360 | priv->rate = params_rate(params); |
| 361 | |
| 362 | /* Look up the sample rate and refer to the offset in the list */ |
| 363 | val = index_in_array(tas5086_sample_rates, |
| 364 | ARRAY_SIZE(tas5086_sample_rates), priv->rate); |
| 365 | |
| 366 | if (val < 0) { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 367 | dev_err(component->dev, "Invalid sample rate\n"); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 368 | return -EINVAL; |
| 369 | } |
| 370 | |
| 371 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 372 | TAS5086_CLOCK_RATE_MASK, |
| 373 | TAS5086_CLOCK_RATE(val)); |
| 374 | if (ret < 0) |
| 375 | return ret; |
| 376 | |
| 377 | /* MCLK / Fs ratio */ |
| 378 | val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios), |
| 379 | priv->mclk / priv->rate); |
| 380 | if (val < 0) { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 381 | dev_err(component->dev, "Invalid MCLK / Fs ratio\n"); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 382 | return -EINVAL; |
| 383 | } |
| 384 | |
| 385 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 386 | TAS5086_CLOCK_RATIO_MASK, |
| 387 | TAS5086_CLOCK_RATIO(val)); |
| 388 | if (ret < 0) |
| 389 | return ret; |
| 390 | |
| 391 | |
| 392 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 393 | TAS5086_CLOCK_SCLK_RATIO_48, |
| 394 | (priv->sclk == 48 * priv->rate) ? |
| 395 | TAS5086_CLOCK_SCLK_RATIO_48 : 0); |
| 396 | if (ret < 0) |
| 397 | return ret; |
| 398 | |
| 399 | /* |
| 400 | * The chip has a very unituitive register mapping and muxes information |
| 401 | * about data format and sample depth into the same register, but not on |
| 402 | * a logical bit-boundary. Hence, we have to refer to the format passed |
| 403 | * in the set_dai_fmt() callback and set up everything from here. |
| 404 | * |
| 405 | * First, determine the 'base' value, using the format ... |
| 406 | */ |
| 407 | switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) { |
| 408 | case SND_SOC_DAIFMT_RIGHT_J: |
| 409 | val = 0x00; |
| 410 | break; |
| 411 | case SND_SOC_DAIFMT_I2S: |
| 412 | val = 0x03; |
| 413 | break; |
| 414 | case SND_SOC_DAIFMT_LEFT_J: |
| 415 | val = 0x06; |
| 416 | break; |
| 417 | default: |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 418 | dev_err(component->dev, "Invalid DAI format\n"); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 419 | return -EINVAL; |
| 420 | } |
| 421 | |
| 422 | /* ... then add the offset for the sample bit depth. */ |
Mark Brown | c665330 | 2014-07-31 12:47:45 +0100 | [diff] [blame] | 423 | switch (params_width(params)) { |
| 424 | case 16: |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 425 | val += 0; |
| 426 | break; |
Mark Brown | c665330 | 2014-07-31 12:47:45 +0100 | [diff] [blame] | 427 | case 20: |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 428 | val += 1; |
| 429 | break; |
Mark Brown | c665330 | 2014-07-31 12:47:45 +0100 | [diff] [blame] | 430 | case 24: |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 431 | val += 2; |
| 432 | break; |
| 433 | default: |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 434 | dev_err(component->dev, "Invalid bit width\n"); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 435 | return -EINVAL; |
Joe Perches | 1d198f2 | 2013-10-08 15:55:45 -0700 | [diff] [blame] | 436 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 437 | |
| 438 | ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val); |
| 439 | if (ret < 0) |
| 440 | return ret; |
| 441 | |
| 442 | /* clock is considered valid now */ |
| 443 | ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, |
| 444 | TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID); |
| 445 | if (ret < 0) |
| 446 | return ret; |
| 447 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 448 | return tas5086_set_deemph(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 449 | } |
| 450 | |
| 451 | static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream) |
| 452 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 453 | struct snd_soc_component *component = dai->component; |
| 454 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 455 | unsigned int val = 0; |
| 456 | |
| 457 | if (mute) |
| 458 | val = TAS5086_SOFT_MUTE_ALL; |
| 459 | |
| 460 | return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val); |
| 461 | } |
| 462 | |
Daniel Mack | d5fd3cc | 2013-10-01 14:48:25 +0200 | [diff] [blame] | 463 | static void tas5086_reset(struct tas5086_private *priv) |
| 464 | { |
| 465 | if (gpio_is_valid(priv->gpio_nreset)) { |
| 466 | /* Reset codec - minimum assertion time is 400ns */ |
| 467 | gpio_direction_output(priv->gpio_nreset, 0); |
| 468 | udelay(1); |
| 469 | gpio_set_value(priv->gpio_nreset, 1); |
| 470 | |
| 471 | /* Codec needs ~15ms to wake up */ |
| 472 | msleep(15); |
| 473 | } |
| 474 | } |
| 475 | |
| 476 | /* charge period values in microseconds */ |
| 477 | static const int tas5086_charge_period[] = { |
| 478 | 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, |
| 479 | 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, |
| 480 | 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, |
| 481 | }; |
| 482 | |
| 483 | static int tas5086_init(struct device *dev, struct tas5086_private *priv) |
| 484 | { |
| 485 | int ret, i; |
| 486 | |
| 487 | /* |
| 488 | * If any of the channels is configured to start in Mid-Z mode, |
| 489 | * configure 'part 1' of the PWM starts to use Mid-Z, and tell |
| 490 | * all configured mid-z channels to start start under 'part 1'. |
| 491 | */ |
| 492 | if (priv->pwm_start_mid_z) |
| 493 | regmap_write(priv->regmap, TAS5086_PWM_START, |
| 494 | TAS5086_PWM_START_MIDZ_FOR_START_1 | |
| 495 | priv->pwm_start_mid_z); |
| 496 | |
| 497 | /* lookup and set split-capacitor charge period */ |
| 498 | if (priv->charge_period == 0) { |
| 499 | regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); |
| 500 | } else { |
| 501 | i = index_in_array(tas5086_charge_period, |
| 502 | ARRAY_SIZE(tas5086_charge_period), |
| 503 | priv->charge_period); |
| 504 | if (i >= 0) |
| 505 | regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, |
| 506 | i + 0x08); |
| 507 | else |
| 508 | dev_warn(dev, |
| 509 | "Invalid split-cap charge period of %d ns.\n", |
| 510 | priv->charge_period); |
| 511 | } |
| 512 | |
| 513 | /* enable factory trim */ |
| 514 | ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); |
| 515 | if (ret < 0) |
| 516 | return ret; |
| 517 | |
| 518 | /* start all channels */ |
| 519 | ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); |
| 520 | if (ret < 0) |
| 521 | return ret; |
| 522 | |
| 523 | /* mute all channels for now */ |
| 524 | ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, |
| 525 | TAS5086_SOFT_MUTE_ALL); |
| 526 | if (ret < 0) |
| 527 | return ret; |
| 528 | |
| 529 | return 0; |
| 530 | } |
| 531 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 532 | /* TAS5086 controls */ |
| 533 | static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1); |
| 534 | |
| 535 | static const struct snd_kcontrol_new tas5086_controls[] = { |
| 536 | SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL, |
| 537 | 0, 0xff, 1, tas5086_dac_tlv), |
| 538 | SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume", |
| 539 | TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1), |
| 540 | 0, 0xff, 1, tas5086_dac_tlv), |
| 541 | SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume", |
| 542 | TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3), |
| 543 | 0, 0xff, 1, tas5086_dac_tlv), |
| 544 | SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume", |
| 545 | TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5), |
| 546 | 0, 0xff, 1, tas5086_dac_tlv), |
| 547 | SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0, |
| 548 | tas5086_get_deemph, tas5086_put_deemph), |
| 549 | }; |
| 550 | |
Daniel Mack | 18710ac | 2013-06-24 16:25:31 +0200 | [diff] [blame] | 551 | /* Input mux controls */ |
| 552 | static const char *tas5086_dapm_sdin_texts[] = |
| 553 | { |
| 554 | "SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R", |
| 555 | "SDIN3-L", "SDIN3-R", "Ground (0)", "nc" |
| 556 | }; |
| 557 | |
| 558 | static const struct soc_enum tas5086_dapm_input_mux_enum[] = { |
| 559 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts), |
| 560 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts), |
| 561 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts), |
| 562 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8, 8, tas5086_dapm_sdin_texts), |
| 563 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4, 8, tas5086_dapm_sdin_texts), |
| 564 | SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0, 8, tas5086_dapm_sdin_texts), |
| 565 | }; |
| 566 | |
| 567 | static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = { |
| 568 | SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]), |
| 569 | SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]), |
| 570 | SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]), |
| 571 | SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]), |
| 572 | SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]), |
| 573 | SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]), |
| 574 | }; |
| 575 | |
| 576 | /* Output mux controls */ |
| 577 | static const char *tas5086_dapm_channel_texts[] = |
| 578 | { "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux", |
| 579 | "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" }; |
| 580 | |
| 581 | static const struct soc_enum tas5086_dapm_output_mux_enum[] = { |
| 582 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts), |
| 583 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts), |
| 584 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts), |
| 585 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8, 6, tas5086_dapm_channel_texts), |
| 586 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4, 6, tas5086_dapm_channel_texts), |
| 587 | SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0, 6, tas5086_dapm_channel_texts), |
| 588 | }; |
| 589 | |
| 590 | static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = { |
| 591 | SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]), |
| 592 | SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]), |
| 593 | SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]), |
| 594 | SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]), |
| 595 | SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]), |
| 596 | SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]), |
| 597 | }; |
| 598 | |
| 599 | static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = { |
| 600 | SND_SOC_DAPM_INPUT("SDIN1-L"), |
| 601 | SND_SOC_DAPM_INPUT("SDIN1-R"), |
| 602 | SND_SOC_DAPM_INPUT("SDIN2-L"), |
| 603 | SND_SOC_DAPM_INPUT("SDIN2-R"), |
| 604 | SND_SOC_DAPM_INPUT("SDIN3-L"), |
| 605 | SND_SOC_DAPM_INPUT("SDIN3-R"), |
| 606 | SND_SOC_DAPM_INPUT("SDIN4-L"), |
| 607 | SND_SOC_DAPM_INPUT("SDIN4-R"), |
| 608 | |
| 609 | SND_SOC_DAPM_OUTPUT("PWM1"), |
| 610 | SND_SOC_DAPM_OUTPUT("PWM2"), |
| 611 | SND_SOC_DAPM_OUTPUT("PWM3"), |
| 612 | SND_SOC_DAPM_OUTPUT("PWM4"), |
| 613 | SND_SOC_DAPM_OUTPUT("PWM5"), |
| 614 | SND_SOC_DAPM_OUTPUT("PWM6"), |
| 615 | |
| 616 | SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0, |
| 617 | &tas5086_dapm_input_mux_controls[0]), |
| 618 | SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0, |
| 619 | &tas5086_dapm_input_mux_controls[1]), |
| 620 | SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0, |
| 621 | &tas5086_dapm_input_mux_controls[2]), |
| 622 | SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0, |
| 623 | &tas5086_dapm_input_mux_controls[3]), |
| 624 | SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0, |
| 625 | &tas5086_dapm_input_mux_controls[4]), |
| 626 | SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0, |
| 627 | &tas5086_dapm_input_mux_controls[5]), |
| 628 | |
| 629 | SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0, |
| 630 | &tas5086_dapm_output_mux_controls[0]), |
| 631 | SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0, |
| 632 | &tas5086_dapm_output_mux_controls[1]), |
| 633 | SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0, |
| 634 | &tas5086_dapm_output_mux_controls[2]), |
| 635 | SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0, |
| 636 | &tas5086_dapm_output_mux_controls[3]), |
| 637 | SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0, |
| 638 | &tas5086_dapm_output_mux_controls[4]), |
| 639 | SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0, |
| 640 | &tas5086_dapm_output_mux_controls[5]), |
| 641 | }; |
| 642 | |
| 643 | static const struct snd_soc_dapm_route tas5086_dapm_routes[] = { |
| 644 | /* SDIN inputs -> channel muxes */ |
| 645 | { "Channel 1 Mux", "SDIN1-L", "SDIN1-L" }, |
| 646 | { "Channel 1 Mux", "SDIN1-R", "SDIN1-R" }, |
| 647 | { "Channel 1 Mux", "SDIN2-L", "SDIN2-L" }, |
| 648 | { "Channel 1 Mux", "SDIN2-R", "SDIN2-R" }, |
| 649 | { "Channel 1 Mux", "SDIN3-L", "SDIN3-L" }, |
| 650 | { "Channel 1 Mux", "SDIN3-R", "SDIN3-R" }, |
| 651 | |
| 652 | { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" }, |
| 653 | { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" }, |
| 654 | { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" }, |
| 655 | { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" }, |
| 656 | { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" }, |
| 657 | { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" }, |
| 658 | |
| 659 | { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" }, |
| 660 | { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" }, |
| 661 | { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" }, |
| 662 | { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" }, |
| 663 | { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" }, |
| 664 | { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" }, |
| 665 | |
| 666 | { "Channel 3 Mux", "SDIN1-L", "SDIN1-L" }, |
| 667 | { "Channel 3 Mux", "SDIN1-R", "SDIN1-R" }, |
| 668 | { "Channel 3 Mux", "SDIN2-L", "SDIN2-L" }, |
| 669 | { "Channel 3 Mux", "SDIN2-R", "SDIN2-R" }, |
| 670 | { "Channel 3 Mux", "SDIN3-L", "SDIN3-L" }, |
| 671 | { "Channel 3 Mux", "SDIN3-R", "SDIN3-R" }, |
| 672 | |
| 673 | { "Channel 4 Mux", "SDIN1-L", "SDIN1-L" }, |
| 674 | { "Channel 4 Mux", "SDIN1-R", "SDIN1-R" }, |
| 675 | { "Channel 4 Mux", "SDIN2-L", "SDIN2-L" }, |
| 676 | { "Channel 4 Mux", "SDIN2-R", "SDIN2-R" }, |
| 677 | { "Channel 4 Mux", "SDIN3-L", "SDIN3-L" }, |
| 678 | { "Channel 4 Mux", "SDIN3-R", "SDIN3-R" }, |
| 679 | |
| 680 | { "Channel 5 Mux", "SDIN1-L", "SDIN1-L" }, |
| 681 | { "Channel 5 Mux", "SDIN1-R", "SDIN1-R" }, |
| 682 | { "Channel 5 Mux", "SDIN2-L", "SDIN2-L" }, |
| 683 | { "Channel 5 Mux", "SDIN2-R", "SDIN2-R" }, |
| 684 | { "Channel 5 Mux", "SDIN3-L", "SDIN3-L" }, |
| 685 | { "Channel 5 Mux", "SDIN3-R", "SDIN3-R" }, |
| 686 | |
| 687 | { "Channel 6 Mux", "SDIN1-L", "SDIN1-L" }, |
| 688 | { "Channel 6 Mux", "SDIN1-R", "SDIN1-R" }, |
| 689 | { "Channel 6 Mux", "SDIN2-L", "SDIN2-L" }, |
| 690 | { "Channel 6 Mux", "SDIN2-R", "SDIN2-R" }, |
| 691 | { "Channel 6 Mux", "SDIN3-L", "SDIN3-L" }, |
| 692 | { "Channel 6 Mux", "SDIN3-R", "SDIN3-R" }, |
| 693 | |
| 694 | /* Channel muxes -> PWM muxes */ |
| 695 | { "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 696 | { "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 697 | { "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 698 | { "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 699 | { "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 700 | { "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" }, |
| 701 | |
| 702 | { "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 703 | { "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 704 | { "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 705 | { "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 706 | { "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 707 | { "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" }, |
| 708 | |
| 709 | { "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 710 | { "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 711 | { "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 712 | { "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 713 | { "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 714 | { "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" }, |
| 715 | |
| 716 | { "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 717 | { "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 718 | { "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 719 | { "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 720 | { "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 721 | { "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" }, |
| 722 | |
| 723 | { "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 724 | { "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 725 | { "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 726 | { "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 727 | { "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 728 | { "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" }, |
| 729 | |
| 730 | { "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 731 | { "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 732 | { "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 733 | { "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 734 | { "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 735 | { "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" }, |
| 736 | |
| 737 | /* The PWM muxes are directly connected to the PWM outputs */ |
| 738 | { "PWM1", NULL, "PWM1 Mux" }, |
| 739 | { "PWM2", NULL, "PWM2 Mux" }, |
| 740 | { "PWM3", NULL, "PWM3 Mux" }, |
| 741 | { "PWM4", NULL, "PWM4 Mux" }, |
| 742 | { "PWM5", NULL, "PWM5 Mux" }, |
| 743 | { "PWM6", NULL, "PWM6 Mux" }, |
| 744 | |
| 745 | }; |
| 746 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 747 | static const struct snd_soc_dai_ops tas5086_dai_ops = { |
| 748 | .hw_params = tas5086_hw_params, |
| 749 | .set_sysclk = tas5086_set_dai_sysclk, |
| 750 | .set_fmt = tas5086_set_dai_fmt, |
| 751 | .mute_stream = tas5086_mute_stream, |
| 752 | }; |
| 753 | |
| 754 | static struct snd_soc_dai_driver tas5086_dai = { |
| 755 | .name = "tas5086-hifi", |
| 756 | .playback = { |
| 757 | .stream_name = "Playback", |
| 758 | .channels_min = 2, |
| 759 | .channels_max = 6, |
| 760 | .rates = TAS5086_PCM_RATES, |
| 761 | .formats = TAS5086_PCM_FORMATS, |
| 762 | }, |
| 763 | .ops = &tas5086_dai_ops, |
| 764 | }; |
| 765 | |
| 766 | #ifdef CONFIG_PM |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 767 | static int tas5086_soc_suspend(struct snd_soc_component *component) |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 768 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 769 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 770 | int ret; |
| 771 | |
| 772 | /* Shut down all channels */ |
| 773 | ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60); |
| 774 | if (ret < 0) |
| 775 | return ret; |
| 776 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 777 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 778 | |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 779 | return 0; |
| 780 | } |
| 781 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 782 | static int tas5086_soc_resume(struct snd_soc_component *component) |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 783 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 784 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 785 | int ret; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 786 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 787 | ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 788 | if (ret < 0) |
| 789 | return ret; |
| 790 | |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 791 | tas5086_reset(priv); |
| 792 | regcache_mark_dirty(priv->regmap); |
| 793 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 794 | ret = tas5086_init(component->dev, priv); |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 795 | if (ret < 0) |
| 796 | return ret; |
| 797 | |
| 798 | ret = regcache_sync(priv->regmap); |
| 799 | if (ret < 0) |
| 800 | return ret; |
| 801 | |
| 802 | return 0; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 803 | } |
| 804 | #else |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 805 | #define tas5086_soc_suspend NULL |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 806 | #define tas5086_soc_resume NULL |
| 807 | #endif /* CONFIG_PM */ |
| 808 | |
| 809 | #ifdef CONFIG_OF |
| 810 | static const struct of_device_id tas5086_dt_ids[] = { |
| 811 | { .compatible = "ti,tas5086", }, |
| 812 | { } |
| 813 | }; |
| 814 | MODULE_DEVICE_TABLE(of, tas5086_dt_ids); |
| 815 | #endif |
| 816 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 817 | static int tas5086_probe(struct snd_soc_component *component) |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 818 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 819 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 820 | int i, ret; |
| 821 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 822 | ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 823 | if (ret < 0) { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 824 | dev_err(component->dev, "Failed to enable regulators: %d\n", ret); |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 825 | return ret; |
| 826 | } |
| 827 | |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 828 | priv->pwm_start_mid_z = 0; |
| 829 | priv->charge_period = 1300000; /* hardware default is 1300 ms */ |
| 830 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 831 | if (of_match_device(of_match_ptr(tas5086_dt_ids), component->dev)) { |
| 832 | struct device_node *of_node = component->dev->of_node; |
Daniel Mack | d5fd3cc | 2013-10-01 14:48:25 +0200 | [diff] [blame] | 833 | |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 834 | of_property_read_u32(of_node, "ti,charge-period", |
| 835 | &priv->charge_period); |
Daniel Mack | 79b23b5 | 2013-06-24 16:25:32 +0200 | [diff] [blame] | 836 | |
| 837 | for (i = 0; i < 6; i++) { |
| 838 | char name[25]; |
| 839 | |
| 840 | snprintf(name, sizeof(name), |
| 841 | "ti,mid-z-channel-%d", i + 1); |
| 842 | |
| 843 | if (of_get_property(of_node, name, NULL) != NULL) |
Daniel Mack | 648c538 | 2013-10-01 14:48:24 +0200 | [diff] [blame] | 844 | priv->pwm_start_mid_z |= 1 << i; |
Daniel Mack | 79b23b5 | 2013-06-24 16:25:32 +0200 | [diff] [blame] | 845 | } |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 846 | } |
| 847 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 848 | tas5086_reset(priv); |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 849 | ret = tas5086_init(component->dev, priv); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 850 | if (ret < 0) |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 851 | goto exit_disable_regulators; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 852 | |
| 853 | /* set master volume to 0 dB */ |
| 854 | ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30); |
| 855 | if (ret < 0) |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 856 | goto exit_disable_regulators; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 857 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 858 | return 0; |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 859 | |
| 860 | exit_disable_regulators: |
| 861 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 862 | |
| 863 | return ret; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 864 | } |
| 865 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 866 | static void tas5086_remove(struct snd_soc_component *component) |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 867 | { |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 868 | struct tas5086_private *priv = snd_soc_component_get_drvdata(component); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 869 | |
| 870 | if (gpio_is_valid(priv->gpio_nreset)) |
| 871 | /* Set codec to the reset state */ |
| 872 | gpio_set_value(priv->gpio_nreset, 0); |
| 873 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 874 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 875 | }; |
| 876 | |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 877 | static const struct snd_soc_component_driver soc_component_dev_tas5086 = { |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 878 | .probe = tas5086_probe, |
| 879 | .remove = tas5086_remove, |
Daniel Mack | 25c84cc | 2013-10-01 14:48:26 +0200 | [diff] [blame] | 880 | .suspend = tas5086_soc_suspend, |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 881 | .resume = tas5086_soc_resume, |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 882 | .controls = tas5086_controls, |
| 883 | .num_controls = ARRAY_SIZE(tas5086_controls), |
| 884 | .dapm_widgets = tas5086_dapm_widgets, |
| 885 | .num_dapm_widgets = ARRAY_SIZE(tas5086_dapm_widgets), |
| 886 | .dapm_routes = tas5086_dapm_routes, |
| 887 | .num_dapm_routes = ARRAY_SIZE(tas5086_dapm_routes), |
| 888 | .idle_bias_on = 1, |
| 889 | .use_pmdown_time = 1, |
| 890 | .endianness = 1, |
| 891 | .non_legacy_dai_naming = 1, |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 892 | }; |
| 893 | |
| 894 | static const struct i2c_device_id tas5086_i2c_id[] = { |
| 895 | { "tas5086", 0 }, |
| 896 | { } |
| 897 | }; |
| 898 | MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id); |
| 899 | |
| 900 | static const struct regmap_config tas5086_regmap = { |
| 901 | .reg_bits = 8, |
Daniel Mack | 8892d47 | 2013-06-24 16:25:30 +0200 | [diff] [blame] | 902 | .val_bits = 32, |
| 903 | .max_register = TAS5086_MAX_REGISTER, |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 904 | .reg_defaults = tas5086_reg_defaults, |
| 905 | .num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults), |
| 906 | .cache_type = REGCACHE_RBTREE, |
| 907 | .volatile_reg = tas5086_volatile_reg, |
| 908 | .writeable_reg = tas5086_writeable_reg, |
| 909 | .readable_reg = tas5086_accessible_reg, |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 910 | .reg_read = tas5086_reg_read, |
| 911 | .reg_write = tas5086_reg_write, |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 912 | }; |
| 913 | |
| 914 | static int tas5086_i2c_probe(struct i2c_client *i2c, |
| 915 | const struct i2c_device_id *id) |
| 916 | { |
| 917 | struct tas5086_private *priv; |
| 918 | struct device *dev = &i2c->dev; |
| 919 | int gpio_nreset = -EINVAL; |
| 920 | int i, ret; |
| 921 | |
| 922 | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| 923 | if (!priv) |
| 924 | return -ENOMEM; |
| 925 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 926 | for (i = 0; i < ARRAY_SIZE(supply_names); i++) |
| 927 | priv->supplies[i].supply = supply_names[i]; |
| 928 | |
| 929 | ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies), |
| 930 | priv->supplies); |
| 931 | if (ret < 0) { |
| 932 | dev_err(dev, "Failed to get regulators: %d\n", ret); |
| 933 | return ret; |
| 934 | } |
| 935 | |
Daniel Mack | 6b36d37 | 2013-06-24 16:25:29 +0200 | [diff] [blame] | 936 | priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 937 | if (IS_ERR(priv->regmap)) { |
| 938 | ret = PTR_ERR(priv->regmap); |
| 939 | dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); |
| 940 | return ret; |
| 941 | } |
| 942 | |
| 943 | i2c_set_clientdata(i2c, priv); |
| 944 | |
| 945 | if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) { |
| 946 | struct device_node *of_node = dev->of_node; |
| 947 | gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0); |
| 948 | } |
| 949 | |
| 950 | if (gpio_is_valid(gpio_nreset)) |
| 951 | if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset")) |
| 952 | gpio_nreset = -EINVAL; |
| 953 | |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 954 | priv->gpio_nreset = gpio_nreset; |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 955 | |
| 956 | ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 957 | if (ret < 0) { |
| 958 | dev_err(dev, "Failed to enable regulators: %d\n", ret); |
| 959 | return ret; |
| 960 | } |
| 961 | |
Daniel Mack | d5fd3cc | 2013-10-01 14:48:25 +0200 | [diff] [blame] | 962 | tas5086_reset(priv); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 963 | |
| 964 | /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ |
| 965 | ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 966 | if (ret == 0 && i != 0x3) { |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 967 | dev_err(dev, |
| 968 | "Failed to identify TAS5086 codec (got %02x)\n", i); |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 969 | ret = -ENODEV; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 970 | } |
| 971 | |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 972 | /* |
| 973 | * The chip has been identified, so we can turn off the power |
| 974 | * again until the dai link is set up. |
| 975 | */ |
| 976 | regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies); |
| 977 | |
| 978 | if (ret == 0) |
Kuninori Morimoto | 459bc02 | 2018-01-29 04:30:43 +0000 | [diff] [blame] | 979 | ret = devm_snd_soc_register_component(&i2c->dev, |
| 980 | &soc_component_dev_tas5086, |
Daniel Mack | c46af31 | 2014-07-03 16:56:43 +0200 | [diff] [blame] | 981 | &tas5086_dai, 1); |
| 982 | |
| 983 | return ret; |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 984 | } |
| 985 | |
| 986 | static int tas5086_i2c_remove(struct i2c_client *i2c) |
| 987 | { |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 988 | return 0; |
| 989 | } |
| 990 | |
| 991 | static struct i2c_driver tas5086_i2c_driver = { |
| 992 | .driver = { |
| 993 | .name = "tas5086", |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 994 | .of_match_table = of_match_ptr(tas5086_dt_ids), |
| 995 | }, |
| 996 | .id_table = tas5086_i2c_id, |
| 997 | .probe = tas5086_i2c_probe, |
| 998 | .remove = tas5086_i2c_remove, |
| 999 | }; |
| 1000 | |
Wei Yongjun | c300d6d | 2013-03-12 21:36:24 +0800 | [diff] [blame] | 1001 | module_i2c_driver(tas5086_i2c_driver); |
Daniel Mack | 4fa8934 | 2013-03-08 13:52:09 +0100 | [diff] [blame] | 1002 | |
| 1003 | MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>"); |
| 1004 | MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver"); |
| 1005 | MODULE_LICENSE("GPL"); |