Tim Harvey | 3bce537 | 2020-05-15 10:57:08 -0700 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Driver for Gateworks System Controller Hardware Monitor module |
| 4 | * |
| 5 | * Copyright (C) 2020 Gateworks Corporation |
| 6 | */ |
| 7 | #include <linux/hwmon.h> |
| 8 | #include <linux/hwmon-sysfs.h> |
| 9 | #include <linux/mfd/gsc.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/of.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/regmap.h> |
| 14 | #include <linux/slab.h> |
| 15 | |
| 16 | #include <linux/platform_data/gsc_hwmon.h> |
| 17 | |
| 18 | #define GSC_HWMON_MAX_TEMP_CH 16 |
| 19 | #define GSC_HWMON_MAX_IN_CH 16 |
| 20 | |
| 21 | #define GSC_HWMON_RESOLUTION 12 |
| 22 | #define GSC_HWMON_VREF 2500 |
| 23 | |
| 24 | struct gsc_hwmon_data { |
| 25 | struct gsc_dev *gsc; |
| 26 | struct gsc_hwmon_platform_data *pdata; |
| 27 | struct regmap *regmap; |
| 28 | const struct gsc_hwmon_channel *temp_ch[GSC_HWMON_MAX_TEMP_CH]; |
| 29 | const struct gsc_hwmon_channel *in_ch[GSC_HWMON_MAX_IN_CH]; |
| 30 | u32 temp_config[GSC_HWMON_MAX_TEMP_CH + 1]; |
| 31 | u32 in_config[GSC_HWMON_MAX_IN_CH + 1]; |
| 32 | struct hwmon_channel_info temp_info; |
| 33 | struct hwmon_channel_info in_info; |
| 34 | const struct hwmon_channel_info *info[3]; |
| 35 | struct hwmon_chip_info chip; |
| 36 | }; |
| 37 | |
| 38 | static struct regmap_bus gsc_hwmon_regmap_bus = { |
| 39 | .reg_read = gsc_read, |
| 40 | .reg_write = gsc_write, |
| 41 | }; |
| 42 | |
| 43 | static const struct regmap_config gsc_hwmon_regmap_config = { |
| 44 | .reg_bits = 8, |
| 45 | .val_bits = 8, |
| 46 | .cache_type = REGCACHE_NONE, |
| 47 | }; |
| 48 | |
| 49 | static ssize_t pwm_auto_point_temp_show(struct device *dev, |
| 50 | struct device_attribute *devattr, |
| 51 | char *buf) |
| 52 | { |
| 53 | struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| 54 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 55 | u8 reg = hwmon->pdata->fan_base + (2 * attr->index); |
| 56 | u8 regs[2]; |
| 57 | int ret; |
| 58 | |
| 59 | ret = regmap_bulk_read(hwmon->regmap, reg, regs, 2); |
| 60 | if (ret) |
| 61 | return ret; |
| 62 | |
| 63 | ret = regs[0] | regs[1] << 8; |
| 64 | return sprintf(buf, "%d\n", ret * 10); |
| 65 | } |
| 66 | |
| 67 | static ssize_t pwm_auto_point_temp_store(struct device *dev, |
| 68 | struct device_attribute *devattr, |
| 69 | const char *buf, size_t count) |
| 70 | { |
| 71 | struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| 72 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 73 | u8 reg = hwmon->pdata->fan_base + (2 * attr->index); |
| 74 | u8 regs[2]; |
| 75 | long temp; |
| 76 | int err; |
| 77 | |
| 78 | if (kstrtol(buf, 10, &temp)) |
| 79 | return -EINVAL; |
| 80 | |
| 81 | temp = clamp_val(temp, 0, 10000); |
| 82 | temp = DIV_ROUND_CLOSEST(temp, 10); |
| 83 | |
| 84 | regs[0] = temp & 0xff; |
| 85 | regs[1] = (temp >> 8) & 0xff; |
| 86 | err = regmap_bulk_write(hwmon->regmap, reg, regs, 2); |
| 87 | if (err) |
| 88 | return err; |
| 89 | |
| 90 | return count; |
| 91 | } |
| 92 | |
| 93 | static ssize_t pwm_auto_point_pwm_show(struct device *dev, |
| 94 | struct device_attribute *devattr, |
| 95 | char *buf) |
| 96 | { |
| 97 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 98 | |
| 99 | return sprintf(buf, "%d\n", 255 * (50 + (attr->index * 10)) / 100); |
| 100 | } |
| 101 | |
| 102 | static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point1_pwm, pwm_auto_point_pwm, 0); |
| 103 | static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, pwm_auto_point_temp, 0); |
| 104 | |
| 105 | static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point2_pwm, pwm_auto_point_pwm, 1); |
| 106 | static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, pwm_auto_point_temp, 1); |
| 107 | |
| 108 | static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point3_pwm, pwm_auto_point_pwm, 2); |
| 109 | static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, pwm_auto_point_temp, 2); |
| 110 | |
| 111 | static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point4_pwm, pwm_auto_point_pwm, 3); |
| 112 | static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, pwm_auto_point_temp, 3); |
| 113 | |
| 114 | static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point5_pwm, pwm_auto_point_pwm, 4); |
| 115 | static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point5_temp, pwm_auto_point_temp, 4); |
| 116 | |
| 117 | static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point6_pwm, pwm_auto_point_pwm, 5); |
| 118 | static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point6_temp, pwm_auto_point_temp, 5); |
| 119 | |
| 120 | static struct attribute *gsc_hwmon_attributes[] = { |
| 121 | &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, |
| 122 | &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, |
| 123 | &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, |
| 124 | &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, |
| 125 | &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, |
| 126 | &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, |
| 127 | &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, |
| 128 | &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, |
| 129 | &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, |
| 130 | &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, |
| 131 | &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr, |
| 132 | &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr, |
| 133 | NULL |
| 134 | }; |
| 135 | |
| 136 | static const struct attribute_group gsc_hwmon_group = { |
| 137 | .attrs = gsc_hwmon_attributes, |
| 138 | }; |
| 139 | __ATTRIBUTE_GROUPS(gsc_hwmon); |
| 140 | |
| 141 | static int |
| 142 | gsc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| 143 | int channel, long *val) |
| 144 | { |
| 145 | struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| 146 | const struct gsc_hwmon_channel *ch; |
| 147 | int sz, ret; |
| 148 | long tmp; |
| 149 | u8 buf[3]; |
| 150 | |
| 151 | switch (type) { |
| 152 | case hwmon_in: |
| 153 | ch = hwmon->in_ch[channel]; |
| 154 | break; |
| 155 | case hwmon_temp: |
| 156 | ch = hwmon->temp_ch[channel]; |
| 157 | break; |
| 158 | default: |
| 159 | return -EOPNOTSUPP; |
| 160 | } |
| 161 | |
| 162 | sz = (ch->mode == mode_voltage) ? 3 : 2; |
| 163 | ret = regmap_bulk_read(hwmon->regmap, ch->reg, buf, sz); |
| 164 | if (ret) |
| 165 | return ret; |
| 166 | |
| 167 | tmp = 0; |
| 168 | while (sz-- > 0) |
| 169 | tmp |= (buf[sz] << (8 * sz)); |
| 170 | |
| 171 | switch (ch->mode) { |
| 172 | case mode_temperature: |
| 173 | if (tmp > 0x8000) |
| 174 | tmp -= 0xffff; |
| 175 | break; |
| 176 | case mode_voltage_raw: |
| 177 | tmp = clamp_val(tmp, 0, BIT(GSC_HWMON_RESOLUTION)); |
| 178 | /* scale based on ref voltage and ADC resolution */ |
| 179 | tmp *= GSC_HWMON_VREF; |
| 180 | tmp >>= GSC_HWMON_RESOLUTION; |
| 181 | /* scale based on optional voltage divider */ |
| 182 | if (ch->vdiv[0] && ch->vdiv[1]) { |
| 183 | tmp *= (ch->vdiv[0] + ch->vdiv[1]); |
| 184 | tmp /= ch->vdiv[1]; |
| 185 | } |
| 186 | /* adjust by uV offset */ |
| 187 | tmp += ch->mvoffset; |
| 188 | break; |
| 189 | case mode_voltage: |
| 190 | /* no adjustment needed */ |
| 191 | break; |
| 192 | } |
| 193 | |
| 194 | *val = tmp; |
| 195 | |
| 196 | return 0; |
| 197 | } |
| 198 | |
| 199 | static int |
| 200 | gsc_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type, |
| 201 | u32 attr, int channel, const char **buf) |
| 202 | { |
| 203 | struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| 204 | |
| 205 | switch (type) { |
| 206 | case hwmon_in: |
| 207 | *buf = hwmon->in_ch[channel]->name; |
| 208 | break; |
| 209 | case hwmon_temp: |
| 210 | *buf = hwmon->temp_ch[channel]->name; |
| 211 | break; |
| 212 | default: |
| 213 | return -ENOTSUPP; |
| 214 | } |
| 215 | |
| 216 | return 0; |
| 217 | } |
| 218 | |
| 219 | static umode_t |
| 220 | gsc_hwmon_is_visible(const void *_data, enum hwmon_sensor_types type, u32 attr, |
| 221 | int ch) |
| 222 | { |
| 223 | return 0444; |
| 224 | } |
| 225 | |
| 226 | static const struct hwmon_ops gsc_hwmon_ops = { |
| 227 | .is_visible = gsc_hwmon_is_visible, |
| 228 | .read = gsc_hwmon_read, |
| 229 | .read_string = gsc_hwmon_read_string, |
| 230 | }; |
| 231 | |
| 232 | static struct gsc_hwmon_platform_data * |
| 233 | gsc_hwmon_get_devtree_pdata(struct device *dev) |
| 234 | { |
| 235 | struct gsc_hwmon_platform_data *pdata; |
| 236 | struct gsc_hwmon_channel *ch; |
| 237 | struct fwnode_handle *child; |
| 238 | struct device_node *fan; |
| 239 | int nchannels; |
| 240 | |
| 241 | nchannels = device_get_child_node_count(dev); |
| 242 | if (nchannels == 0) |
| 243 | return ERR_PTR(-ENODEV); |
| 244 | |
| 245 | pdata = devm_kzalloc(dev, |
| 246 | sizeof(*pdata) + nchannels * sizeof(*ch), |
| 247 | GFP_KERNEL); |
| 248 | if (!pdata) |
| 249 | return ERR_PTR(-ENOMEM); |
| 250 | ch = (struct gsc_hwmon_channel *)(pdata + 1); |
| 251 | pdata->channels = ch; |
| 252 | pdata->nchannels = nchannels; |
| 253 | |
| 254 | /* fan controller base address */ |
| 255 | fan = of_find_compatible_node(dev->parent->of_node, NULL, "gw,gsc-fan"); |
| 256 | if (fan && of_property_read_u32(fan, "reg", &pdata->fan_base)) { |
| 257 | dev_err(dev, "fan node without base\n"); |
| 258 | return ERR_PTR(-EINVAL); |
| 259 | } |
| 260 | |
| 261 | /* allocate structures for channels and count instances of each type */ |
| 262 | device_for_each_child_node(dev, child) { |
| 263 | if (fwnode_property_read_string(child, "label", &ch->name)) { |
| 264 | dev_err(dev, "channel without label\n"); |
| 265 | fwnode_handle_put(child); |
| 266 | return ERR_PTR(-EINVAL); |
| 267 | } |
| 268 | if (fwnode_property_read_u32(child, "reg", &ch->reg)) { |
| 269 | dev_err(dev, "channel without reg\n"); |
| 270 | fwnode_handle_put(child); |
| 271 | return ERR_PTR(-EINVAL); |
| 272 | } |
| 273 | if (fwnode_property_read_u32(child, "gw,mode", &ch->mode)) { |
| 274 | dev_err(dev, "channel without mode\n"); |
| 275 | fwnode_handle_put(child); |
| 276 | return ERR_PTR(-EINVAL); |
| 277 | } |
| 278 | if (ch->mode > mode_max) { |
| 279 | dev_err(dev, "invalid channel mode\n"); |
| 280 | fwnode_handle_put(child); |
| 281 | return ERR_PTR(-EINVAL); |
| 282 | } |
| 283 | |
| 284 | if (!fwnode_property_read_u32(child, |
| 285 | "gw,voltage-offset-microvolt", |
| 286 | &ch->mvoffset)) |
| 287 | ch->mvoffset /= 1000; |
| 288 | fwnode_property_read_u32_array(child, |
| 289 | "gw,voltage-divider-ohms", |
| 290 | ch->vdiv, ARRAY_SIZE(ch->vdiv)); |
| 291 | ch++; |
| 292 | } |
| 293 | |
| 294 | return pdata; |
| 295 | } |
| 296 | |
| 297 | static int gsc_hwmon_probe(struct platform_device *pdev) |
| 298 | { |
| 299 | struct gsc_dev *gsc = dev_get_drvdata(pdev->dev.parent); |
| 300 | struct device *dev = &pdev->dev; |
| 301 | struct device *hwmon_dev; |
| 302 | struct gsc_hwmon_platform_data *pdata = dev_get_platdata(dev); |
| 303 | struct gsc_hwmon_data *hwmon; |
| 304 | const struct attribute_group **groups; |
| 305 | int i, i_in, i_temp; |
| 306 | |
| 307 | if (!pdata) { |
| 308 | pdata = gsc_hwmon_get_devtree_pdata(dev); |
| 309 | if (IS_ERR(pdata)) |
| 310 | return PTR_ERR(pdata); |
| 311 | } |
| 312 | |
| 313 | hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL); |
| 314 | if (!hwmon) |
| 315 | return -ENOMEM; |
| 316 | hwmon->gsc = gsc; |
| 317 | hwmon->pdata = pdata; |
| 318 | |
| 319 | hwmon->regmap = devm_regmap_init(dev, &gsc_hwmon_regmap_bus, |
| 320 | gsc->i2c_hwmon, |
| 321 | &gsc_hwmon_regmap_config); |
| 322 | if (IS_ERR(hwmon->regmap)) |
| 323 | return PTR_ERR(hwmon->regmap); |
| 324 | |
| 325 | for (i = 0, i_in = 0, i_temp = 0; i < hwmon->pdata->nchannels; i++) { |
| 326 | const struct gsc_hwmon_channel *ch = &pdata->channels[i]; |
| 327 | |
| 328 | switch (ch->mode) { |
| 329 | case mode_temperature: |
| 330 | if (i_temp == GSC_HWMON_MAX_TEMP_CH) { |
| 331 | dev_err(gsc->dev, "too many temp channels\n"); |
| 332 | return -EINVAL; |
| 333 | } |
| 334 | hwmon->temp_ch[i_temp] = ch; |
| 335 | hwmon->temp_config[i_temp] = HWMON_T_INPUT | |
| 336 | HWMON_T_LABEL; |
| 337 | i_temp++; |
| 338 | break; |
| 339 | case mode_voltage: |
| 340 | case mode_voltage_raw: |
| 341 | if (i_in == GSC_HWMON_MAX_IN_CH) { |
| 342 | dev_err(gsc->dev, "too many input channels\n"); |
| 343 | return -EINVAL; |
| 344 | } |
| 345 | hwmon->in_ch[i_in] = ch; |
| 346 | hwmon->in_config[i_in] = |
| 347 | HWMON_I_INPUT | HWMON_I_LABEL; |
| 348 | i_in++; |
| 349 | break; |
| 350 | default: |
| 351 | dev_err(gsc->dev, "invalid mode: %d\n", ch->mode); |
| 352 | return -EINVAL; |
| 353 | } |
| 354 | } |
| 355 | |
| 356 | /* setup config structures */ |
| 357 | hwmon->chip.ops = &gsc_hwmon_ops; |
| 358 | hwmon->chip.info = hwmon->info; |
| 359 | hwmon->info[0] = &hwmon->temp_info; |
| 360 | hwmon->info[1] = &hwmon->in_info; |
| 361 | hwmon->temp_info.type = hwmon_temp; |
| 362 | hwmon->temp_info.config = hwmon->temp_config; |
| 363 | hwmon->in_info.type = hwmon_in; |
| 364 | hwmon->in_info.config = hwmon->in_config; |
| 365 | |
| 366 | groups = pdata->fan_base ? gsc_hwmon_groups : NULL; |
| 367 | hwmon_dev = devm_hwmon_device_register_with_info(dev, |
| 368 | KBUILD_MODNAME, hwmon, |
| 369 | &hwmon->chip, groups); |
| 370 | return PTR_ERR_OR_ZERO(hwmon_dev); |
| 371 | } |
| 372 | |
| 373 | static const struct of_device_id gsc_hwmon_of_match[] = { |
| 374 | { .compatible = "gw,gsc-adc", }, |
| 375 | {} |
| 376 | }; |
| 377 | |
| 378 | static struct platform_driver gsc_hwmon_driver = { |
| 379 | .driver = { |
| 380 | .name = "gsc-hwmon", |
| 381 | .of_match_table = gsc_hwmon_of_match, |
| 382 | }, |
| 383 | .probe = gsc_hwmon_probe, |
| 384 | }; |
| 385 | |
| 386 | module_platform_driver(gsc_hwmon_driver); |
| 387 | |
| 388 | MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>"); |
| 389 | MODULE_DESCRIPTION("GSC hardware monitor driver"); |
| 390 | MODULE_LICENSE("GPL v2"); |