arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
 */

/dts-v1/;
#include "vf610-zii-dev.dtsi"

/ {
	model = "ZII VF610 Development Board, Rev B";
	compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";

	mdio-mux {
		compatible = "mdio-mux-gpio";
		pinctrl-0 = <&pinctrl_mdio_mux>;
		pinctrl-names = "default";
		gpios = <&gpio0 8  GPIO_ACTIVE_HIGH
			 &gpio0 9  GPIO_ACTIVE_HIGH
			 &gpio0 24 GPIO_ACTIVE_HIGH
			 &gpio0 25 GPIO_ACTIVE_HIGH>;
		mdio-parent-bus = <&mdio1>;
		#address-cells = <1>;
		#size-cells = <0>;

		mdio_mux_1: mdio@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			switch0: switch@0 {
				compatible = "marvell,mv88e6085";
				pinctrl-0 = <&pinctrl_gpio_switch0>;
				pinctrl-names = "default";
				reg = <0>;
				dsa,member = <0 0>;
				interrupt-parent = <&gpio0>;
				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
				interrupt-controller;
				#interrupt-cells = <2>;
				eeprom-length = <512>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						label = "lan0";
						phy-handle = <&switch0phy0>;
					};

					port@1 {
						reg = <1>;
						label = "lan1";
						phy-handle = <&switch0phy1>;
					};

					port@2 {
						reg = <2>;
						label = "lan2";
						phy-handle = <&switch0phy2>;
					};

					switch0port5: port@5 {
						reg = <5>;
						label = "dsa";
						phy-mode = "rgmii-txid";
						link = <&switch1port6
							&switch2port9>;
						fixed-link {
							speed = <1000>;
							full-duplex;
						};
					};

					port@6 {
						reg = <6>;
						label = "cpu";
						ethernet = <&fec1>;

						fixed-link {
							speed = <100>;
							full-duplex;
						};
					};
				};
				mdio {
					#address-cells = <1>;
					#size-cells = <0>;
					switch0phy0: switch0phy0@0 {
						reg = <0>;
						interrupt-parent = <&switch0>;
						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
					};
					switch0phy1: switch1phy0@1 {
						reg = <1>;
						interrupt-parent = <&switch0>;
						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
					};
					switch0phy2: switch1phy0@2 {
						reg = <2>;
						interrupt-parent = <&switch0>;
						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
					};
				};
			};
		};

		mdio_mux_2: mdio@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;

			switch1: switch@0 {
				compatible = "marvell,mv88e6085";
				pinctrl-0 = <&pinctrl_gpio_switch1>;
				pinctrl-names = "default";
				reg = <0>;
				dsa,member = <0 1>;
				interrupt-parent = <&gpio0>;
				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
				interrupt-controller;
				#interrupt-cells = <2>;
				eeprom-length = <512>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						label = "lan3";
						phy-handle = <&switch1phy0>;
					};

					port@1 {
						reg = <1>;
						label = "lan4";
						phy-handle = <&switch1phy1>;
					};

					port@2 {
						reg = <2>;
						label = "lan5";
						phy-handle = <&switch1phy2>;
					};

					switch1port5: port@5 {
						reg = <5>;
						label = "dsa";
						link = <&switch2port9>;
						phy-mode = "rgmii-txid";

						fixed-link {
							speed = <1000>;
							full-duplex;
						};
					};

					switch1port6: port@6 {
						reg = <6>;
						label = "dsa";
						phy-mode = "rgmii-txid";
						link = <&switch0port5>;
						fixed-link {
							speed = <1000>;
							full-duplex;
						};
					};
				};
				mdio {
					#address-cells = <1>;
					#size-cells = <0>;

					switch1phy0: switch1phy0@0 {
						reg = <0>;
						interrupt-parent = <&switch1>;
						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
					};

					switch1phy1: switch1phy0@1 {
						reg = <1>;
						interrupt-parent = <&switch1>;
						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
					};

					switch1phy2: switch1phy0@2 {
						reg = <2>;
						interrupt-parent = <&switch1>;
						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
					};
				};
			};
		};

		mdio_mux_4: mdio@4 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <4>;

			switch2: switch@0 {
				compatible = "marvell,mv88e6085";
				reg = <0>;
				dsa,member = <0 2>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						label = "lan6";
						phy-handle = <&switch2phy0>;
					};

					port@1 {
						reg = <1>;
						label = "lan7";
						phy-handle = <&switch2phy1>;
					};

					port@2 {
						reg = <2>;
						label = "lan8";
						phy-handle = <&switch2phy2>;
					};

					port@3 {
						reg = <3>;
						label = "optical3";

						fixed-link {
							speed = <1000>;
							full-duplex;
							link-gpios = <&gpio6 2
							      GPIO_ACTIVE_HIGH>;
						};
					};

					port@4 {
						reg = <4>;
						label = "optical4";

						fixed-link {
							speed = <1000>;
							full-duplex;
							link-gpios = <&gpio6 3
							      GPIO_ACTIVE_HIGH>;
						};
					};

					switch2port9: port@9 {
						reg = <9>;
						label = "dsa";
						phy-mode = "rgmii-txid";
						link = <&switch1port5
							&switch0port5>;

						fixed-link {
							speed = <1000>;
							full-duplex;
						};
					};
				};
				mdio {
					#address-cells = <1>;
					#size-cells = <0>;

					switch2phy0: phy@0 {
						reg = <0>;
					};
					switch2phy1: phy@1 {
						reg = <1>;
					};
					switch2phy2: phy@2 {
						reg = <2>;
					};
				};
			};
		};

		mdio_mux_8: mdio@8 {
			reg = <8>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};

	spi0 {
		compatible = "spi-gpio";
		pinctrl-0 = <&pinctrl_gpio_spi0>;
		pinctrl-names = "default";
		#address-cells = <1>;
		#size-cells = <0>;
		gpio-sck  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
		gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
		gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
			     &gpio1  8 GPIO_ACTIVE_HIGH>;
		num-chipselects = <2>;

		flash@0 {
			compatible = "m25p128", "jedec,spi-nor";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0>;
			spi-max-frequency = <1000000>;
		};

		at93c46d@1 {
			compatible = "atmel,at93c46d";
			pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
			pinctrl-names = "default";
			#address-cells = <0>;
			#size-cells = <0>;
			reg = <1>;
			spi-max-frequency = <500000>;
			spi-cs-high;
			data-size = <16>;
			select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
		};
	};
};

&i2c0 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c0>;
	status = "okay";

	gpio5: io-expander@20 {
		compatible = "nxp,pca9554";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;

	};

	gpio6: io-expander@22 {
		compatible = "nxp,pca9554";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pca9554_22>;
		reg = <0x22>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		interrupt-parent = <&gpio3>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	tca9548@70 {
		compatible = "nxp,pca9548";
		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
		pinctrl-names = "default";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x70>;
		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;

		i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;

			sfp1: eeprom@50 {
				compatible = "atmel,24c02";
				reg = <0x50>;
			};
		};

		i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;

			sfp2: eeprom@50 {
				compatible = "atmel,24c02";
				reg = <0x50>;
			};
		};

		i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;

			sfp3: eeprom@50 {
				compatible = "atmel,24c02";
				reg = <0x50>;
			};
		};

		i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;

			sfp4: eeprom@50 {
				compatible = "atmel,24c02";
				reg = <0x50>;
			};
		};

		i2c@4 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <4>;
		};
	};
};


&iomuxc {
	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
		fsl,pins = <
			VF610_PAD_PTE27__GPIO_132	0x33e2
		>;
	};

	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
		fsl,pins = <
			VF610_PAD_PTB22__GPIO_44	0x33e2
			VF610_PAD_PTB21__GPIO_43	0x33e2
			VF610_PAD_PTB20__GPIO_42	0x33e1
			VF610_PAD_PTB19__GPIO_41	0x33e2
			VF610_PAD_PTB18__GPIO_40	0x33e2
		>;
	};

	pinctrl_mdio_mux: pinctrl-mdio-mux {
		fsl,pins = <
			VF610_PAD_PTA18__GPIO_8		0x31c2
			VF610_PAD_PTA19__GPIO_9		0x31c2
			VF610_PAD_PTB2__GPIO_24		0x31c2
			VF610_PAD_PTB3__GPIO_25		0x31c2
		>;
	};

	pinctrl_pca9554_22: pinctrl-pca95540-22 {
		fsl,pins = <
			VF610_PAD_PTB28__GPIO_98	0x219d
		>;
	};
};