Andrew de Quincey | 96bf2f2 | 2005-07-07 17:57:53 -0700 | [diff] [blame^] | 1 | /* |
| 2 | Driver for Samsung S5H1420 QPSK Demodulator |
| 3 | |
| 4 | Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> |
| 5 | |
| 6 | This program is free software; you can redistribute it and/or modify |
| 7 | it under the terms of the GNU General Public License as published by |
| 8 | the Free Software Foundation; either version 2 of the License, or |
| 9 | (at your option) any later version. |
| 10 | |
| 11 | This program is distributed in the hope that it will be useful, |
| 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | |
| 21 | */ |
| 22 | |
| 23 | #include <linux/kernel.h> |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/init.h> |
| 26 | #include <linux/string.h> |
| 27 | #include <linux/slab.h> |
| 28 | #include <linux/delay.h> |
| 29 | |
| 30 | #include "dvb_frontend.h" |
| 31 | #include "s5h1420.h" |
| 32 | |
| 33 | |
| 34 | |
| 35 | #define TONE_FREQ 22000 |
| 36 | |
| 37 | struct s5h1420_state { |
| 38 | struct i2c_adapter* i2c; |
| 39 | struct dvb_frontend_ops ops; |
| 40 | const struct s5h1420_config* config; |
| 41 | struct dvb_frontend frontend; |
| 42 | |
| 43 | u8 postlocked:1; |
| 44 | u32 fclk; |
| 45 | u32 tunedfreq; |
| 46 | fe_code_rate_t fec_inner; |
| 47 | u32 symbol_rate; |
| 48 | }; |
| 49 | |
| 50 | static u32 s5h1420_getsymbolrate(struct s5h1420_state* state); |
| 51 | static int s5h1420_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings); |
| 52 | |
| 53 | |
| 54 | static int debug = 0; |
| 55 | #define dprintk if (debug) printk |
| 56 | |
| 57 | static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data) |
| 58 | { |
| 59 | u8 buf [] = { reg, data }; |
| 60 | struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; |
| 61 | int err; |
| 62 | |
| 63 | if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { |
| 64 | dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data); |
| 65 | return -EREMOTEIO; |
| 66 | } |
| 67 | |
| 68 | return 0; |
| 69 | } |
| 70 | |
| 71 | static u8 s5h1420_readreg (struct s5h1420_state* state, u8 reg) |
| 72 | { |
| 73 | int ret; |
| 74 | u8 b0 [] = { reg }; |
| 75 | u8 b1 [] = { 0 }; |
| 76 | struct i2c_msg msg1 = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }; |
| 77 | struct i2c_msg msg2 = { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 }; |
| 78 | |
| 79 | if ((ret = i2c_transfer (state->i2c, &msg1, 1)) != 1) |
| 80 | return ret; |
| 81 | |
| 82 | if ((ret = i2c_transfer (state->i2c, &msg2, 1)) != 1) |
| 83 | return ret; |
| 84 | |
| 85 | return b1[0]; |
| 86 | } |
| 87 | |
| 88 | static int s5h1420_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) |
| 89 | { |
| 90 | struct s5h1420_state* state = fe->demodulator_priv; |
| 91 | |
| 92 | switch(voltage) { |
| 93 | case SEC_VOLTAGE_13: |
| 94 | s5h1420_writereg(state, 0x3c, (s5h1420_readreg(state, 0x3c) & 0xfe) | 0x02); |
| 95 | break; |
| 96 | |
| 97 | case SEC_VOLTAGE_18: |
| 98 | s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) | 0x03); |
| 99 | break; |
| 100 | |
| 101 | case SEC_VOLTAGE_OFF: |
| 102 | s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) & 0xfd); |
| 103 | break; |
| 104 | } |
| 105 | |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | static int s5h1420_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) |
| 110 | { |
| 111 | struct s5h1420_state* state = fe->demodulator_priv; |
| 112 | |
| 113 | switch(tone) { |
| 114 | case SEC_TONE_ON: |
| 115 | s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x74) | 0x08); |
| 116 | break; |
| 117 | |
| 118 | case SEC_TONE_OFF: |
| 119 | s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x74) | 0x01); |
| 120 | break; |
| 121 | } |
| 122 | |
| 123 | return 0; |
| 124 | } |
| 125 | |
| 126 | static int s5h1420_send_master_cmd (struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) |
| 127 | { |
| 128 | struct s5h1420_state* state = fe->demodulator_priv; |
| 129 | u8 val; |
| 130 | int i; |
| 131 | unsigned long timeout; |
| 132 | int result = 0; |
| 133 | |
| 134 | /* setup for DISEQC */ |
| 135 | val = s5h1420_readreg(state, 0x3b); |
| 136 | s5h1420_writereg(state, 0x3b, 0x02); |
| 137 | msleep(15); |
| 138 | |
| 139 | /* write the DISEQC command bytes */ |
| 140 | for(i=0; i< cmd->msg_len; i++) { |
| 141 | s5h1420_writereg(state, 0x3c + i, cmd->msg[i]); |
| 142 | } |
| 143 | |
| 144 | /* kick off transmission */ |
| 145 | s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | ((cmd->msg_len-1) << 4) | 0x08); |
| 146 | |
| 147 | /* wait for transmission to complete */ |
| 148 | timeout = jiffies + ((100*HZ) / 1000); |
| 149 | while(time_before(jiffies, timeout)) { |
| 150 | if (s5h1420_readreg(state, 0x3b) & 0x08) |
| 151 | break; |
| 152 | |
| 153 | msleep(5); |
| 154 | } |
| 155 | if (time_after(jiffies, timeout)) |
| 156 | result = -ETIMEDOUT; |
| 157 | |
| 158 | /* restore original settings */ |
| 159 | s5h1420_writereg(state, 0x3b, val); |
| 160 | msleep(15); |
| 161 | return result; |
| 162 | } |
| 163 | |
| 164 | static int s5h1420_recv_slave_reply (struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply) |
| 165 | { |
| 166 | struct s5h1420_state* state = fe->demodulator_priv; |
| 167 | u8 val; |
| 168 | int i; |
| 169 | int length; |
| 170 | unsigned long timeout; |
| 171 | int result = 0; |
| 172 | |
| 173 | /* setup for DISEQC recieve */ |
| 174 | val = s5h1420_readreg(state, 0x3b); |
| 175 | s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */ |
| 176 | msleep(15); |
| 177 | |
| 178 | /* wait for reception to complete */ |
| 179 | timeout = jiffies + ((reply->timeout*HZ) / 1000); |
| 180 | while(time_before(jiffies, timeout)) { |
| 181 | if (!(s5h1420_readreg(state, 0x3b) & 0x80)) /* FIXME: do we test DIS_RDY(0x08) or RCV_EN(0x80)? */ |
| 182 | break; |
| 183 | |
| 184 | msleep(5); |
| 185 | } |
| 186 | if (time_after(jiffies, timeout)) { |
| 187 | result = -ETIMEDOUT; |
| 188 | goto exit; |
| 189 | } |
| 190 | |
| 191 | /* check error flag - FIXME: not sure what this does - docs do not describe |
| 192 | * beyond "error flag for diseqc receive data :( */ |
| 193 | if (s5h1420_readreg(state, 0x49)) { |
| 194 | result = -EIO; |
| 195 | goto exit; |
| 196 | } |
| 197 | |
| 198 | /* check length */ |
| 199 | length = (s5h1420_readreg(state, 0x3b) & 0x70) >> 4; |
| 200 | if (length > sizeof(reply->msg)) { |
| 201 | result = -EOVERFLOW; |
| 202 | goto exit; |
| 203 | } |
| 204 | reply->msg_len = length; |
| 205 | |
| 206 | /* extract data */ |
| 207 | for(i=0; i< length; i++) { |
| 208 | reply->msg[i] = s5h1420_readreg(state, 0x3c + i); |
| 209 | } |
| 210 | |
| 211 | exit: |
| 212 | /* restore original settings */ |
| 213 | s5h1420_writereg(state, 0x3b, val); |
| 214 | msleep(15); |
| 215 | return result; |
| 216 | } |
| 217 | |
| 218 | static int s5h1420_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) |
| 219 | { |
| 220 | struct s5h1420_state* state = fe->demodulator_priv; |
| 221 | u8 val; |
| 222 | int result = 0; |
| 223 | unsigned long timeout; |
| 224 | |
| 225 | /* setup for tone burst */ |
| 226 | val = s5h1420_readreg(state, 0x3b); |
| 227 | s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x70) | 0x01); |
| 228 | |
| 229 | /* set value for B position if requested */ |
| 230 | if (minicmd == SEC_MINI_B) { |
| 231 | s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x04); |
| 232 | } |
| 233 | msleep(15); |
| 234 | |
| 235 | /* start transmission */ |
| 236 | s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x08); |
| 237 | |
| 238 | /* wait for transmission to complete */ |
| 239 | timeout = jiffies + ((20*HZ) / 1000); |
| 240 | while(time_before(jiffies, timeout)) { |
| 241 | if (!(s5h1420_readreg(state, 0x3b) & 0x08)) |
| 242 | break; |
| 243 | |
| 244 | msleep(5); |
| 245 | } |
| 246 | if (time_after(jiffies, timeout)) |
| 247 | result = -ETIMEDOUT; |
| 248 | |
| 249 | /* restore original settings */ |
| 250 | s5h1420_writereg(state, 0x3b, val); |
| 251 | msleep(15); |
| 252 | return result; |
| 253 | } |
| 254 | |
| 255 | static fe_status_t s5h1420_get_status_bits(struct s5h1420_state* state) |
| 256 | { |
| 257 | u8 val; |
| 258 | fe_status_t status = 0; |
| 259 | |
| 260 | val = s5h1420_readreg(state, 0x14); |
| 261 | if (val & 0x02) |
| 262 | status |= FE_HAS_SIGNAL; // FIXME: not sure if this is right |
| 263 | if (val & 0x01) |
| 264 | status |= FE_HAS_CARRIER; // FIXME: not sure if this is right |
| 265 | val = s5h1420_readreg(state, 0x36); |
| 266 | if (val & 0x01) |
| 267 | status |= FE_HAS_VITERBI; |
| 268 | if (val & 0x20) |
| 269 | status |= FE_HAS_SYNC; |
| 270 | if (status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|FE_HAS_SYNC)) |
| 271 | status |= FE_HAS_LOCK; |
| 272 | |
| 273 | return status; |
| 274 | } |
| 275 | |
| 276 | static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| 277 | { |
| 278 | struct s5h1420_state* state = fe->demodulator_priv; |
| 279 | u8 val; |
| 280 | |
| 281 | if (status == NULL) |
| 282 | return -EINVAL; |
| 283 | |
| 284 | /* determine lock state */ |
| 285 | *status = s5h1420_get_status_bits(state); |
| 286 | |
| 287 | /* fix for FEC 5/6 inversion issue - if it doesn't quite lock, invert the inversion, |
| 288 | wait a bit and check again */ |
| 289 | if (*status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI)) { |
| 290 | val = s5h1420_readreg(state, 0x32); |
| 291 | if ((val & 0x07) == 0x03) { |
| 292 | if (val & 0x08) |
| 293 | s5h1420_writereg(state, 0x31, 0x13); |
| 294 | else |
| 295 | s5h1420_writereg(state, 0x31, 0x1b); |
| 296 | |
| 297 | /* wait a bit then update lock status */ |
| 298 | mdelay(200); |
| 299 | *status = s5h1420_get_status_bits(state); |
| 300 | } |
| 301 | } |
| 302 | |
| 303 | /* perform post lock setup */ |
| 304 | if ((*status & FE_HAS_LOCK) && (!state->postlocked)) { |
| 305 | |
| 306 | /* calculate the data rate */ |
| 307 | u32 tmp = s5h1420_getsymbolrate(state); |
| 308 | switch(s5h1420_readreg(state, 0x32) & 0x07) { |
| 309 | case 0: |
| 310 | tmp = (tmp * 2 * 1) / 2; |
| 311 | break; |
| 312 | |
| 313 | case 1: |
| 314 | tmp = (tmp * 2 * 2) / 3; |
| 315 | break; |
| 316 | |
| 317 | case 2: |
| 318 | tmp = (tmp * 2 * 3) / 4; |
| 319 | break; |
| 320 | |
| 321 | case 3: |
| 322 | tmp = (tmp * 2 * 5) / 6; |
| 323 | break; |
| 324 | |
| 325 | case 4: |
| 326 | tmp = (tmp * 2 * 6) / 7; |
| 327 | break; |
| 328 | |
| 329 | case 5: |
| 330 | tmp = (tmp * 2 * 7) / 8; |
| 331 | break; |
| 332 | } |
| 333 | tmp = state->fclk / tmp; |
| 334 | |
| 335 | /* set the MPEG_CLK_INTL for the calculated data rate */ |
| 336 | if (tmp < 4) |
| 337 | val = 0x00; |
| 338 | else if (tmp < 8) |
| 339 | val = 0x01; |
| 340 | else if (tmp < 12) |
| 341 | val = 0x02; |
| 342 | else if (tmp < 16) |
| 343 | val = 0x03; |
| 344 | else if (tmp < 24) |
| 345 | val = 0x04; |
| 346 | else if (tmp < 32) |
| 347 | val = 0x05; |
| 348 | else |
| 349 | val = 0x06; |
| 350 | s5h1420_writereg(state, 0x22, val); |
| 351 | |
| 352 | /* DC freeze */ |
| 353 | s5h1420_writereg(state, 0x1f, s5h1420_readreg(state, 0x1f) | 0x01); |
| 354 | |
| 355 | /* kicker disable + remove DC offset */ |
| 356 | s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) & 0x6f); |
| 357 | |
| 358 | /* post-lock processing has been done! */ |
| 359 | state->postlocked = 1; |
| 360 | } |
| 361 | |
| 362 | return 0; |
| 363 | } |
| 364 | |
| 365 | static int s5h1420_read_ber(struct dvb_frontend* fe, u32* ber) |
| 366 | { |
| 367 | struct s5h1420_state* state = fe->demodulator_priv; |
| 368 | |
| 369 | s5h1420_writereg(state, 0x46, 0x1d); |
| 370 | mdelay(25); |
| 371 | return (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); |
| 372 | } |
| 373 | |
| 374 | static int s5h1420_read_signal_strength(struct dvb_frontend* fe, u16* strength) |
| 375 | { |
| 376 | struct s5h1420_state* state = fe->demodulator_priv; |
| 377 | |
| 378 | u8 val = 0xff - s5h1420_readreg(state, 0x15); |
| 379 | |
| 380 | return (int) ((val << 8) | val); |
| 381 | } |
| 382 | |
| 383 | static int s5h1420_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| 384 | { |
| 385 | struct s5h1420_state* state = fe->demodulator_priv; |
| 386 | |
| 387 | s5h1420_writereg(state, 0x46, 0x1f); |
| 388 | mdelay(25); |
| 389 | return (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); |
| 390 | } |
| 391 | |
| 392 | static void s5h1420_reset(struct s5h1420_state* state) |
| 393 | { |
| 394 | s5h1420_writereg (state, 0x01, 0x08); |
| 395 | s5h1420_writereg (state, 0x01, 0x00); |
| 396 | udelay(10); |
| 397 | } |
| 398 | |
| 399 | static void s5h1420_setsymbolrate(struct s5h1420_state* state, struct dvb_frontend_parameters *p) |
| 400 | { |
| 401 | u64 val; |
| 402 | |
| 403 | val = (p->u.qpsk.symbol_rate / 1000) * (1<<24); |
| 404 | if (p->u.qpsk.symbol_rate <= 21000000) { |
| 405 | val *= 2; |
| 406 | } |
| 407 | do_div(val, (state->fclk / 1000)); |
| 408 | |
| 409 | s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0x7f); |
| 410 | s5h1420_writereg(state, 0x11, val >> 16); |
| 411 | s5h1420_writereg(state, 0x12, val >> 8); |
| 412 | s5h1420_writereg(state, 0x13, val & 0xff); |
| 413 | s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x80); |
| 414 | } |
| 415 | |
| 416 | static u32 s5h1420_getsymbolrate(struct s5h1420_state* state) |
| 417 | { |
| 418 | u64 val; |
| 419 | int sampling = 2; |
| 420 | |
| 421 | if (s5h1420_readreg(state, 0x05) & 0x2) |
| 422 | sampling = 1; |
| 423 | |
| 424 | s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08); |
| 425 | val = s5h1420_readreg(state, 0x11) << 16; |
| 426 | val |= s5h1420_readreg(state, 0x12) << 8; |
| 427 | val |= s5h1420_readreg(state, 0x13); |
| 428 | s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7); |
| 429 | |
| 430 | val *= (state->fclk / 1000); |
| 431 | do_div(val, ((1<<24) * sampling)); |
| 432 | |
| 433 | return (u32) (val * 1000); |
| 434 | } |
| 435 | |
| 436 | static void s5h1420_setfreqoffset(struct s5h1420_state* state, int freqoffset) |
| 437 | { |
| 438 | int val; |
| 439 | |
| 440 | /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so |
| 441 | * divide fclk by 1000000 to get the correct value. */ |
| 442 | val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000)); |
| 443 | |
| 444 | s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0xbf); |
| 445 | s5h1420_writereg(state, 0x0e, val >> 16); |
| 446 | s5h1420_writereg(state, 0x0f, val >> 8); |
| 447 | s5h1420_writereg(state, 0x10, val & 0xff); |
| 448 | s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x40); |
| 449 | } |
| 450 | |
| 451 | static int s5h1420_getfreqoffset(struct s5h1420_state* state) |
| 452 | { |
| 453 | int val; |
| 454 | |
| 455 | s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08); |
| 456 | val = s5h1420_readreg(state, 0x0e) << 16; |
| 457 | val |= s5h1420_readreg(state, 0x0f) << 8; |
| 458 | val |= s5h1420_readreg(state, 0x10); |
| 459 | s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7); |
| 460 | |
| 461 | if (val & 0x800000) |
| 462 | val |= 0xff000000; |
| 463 | |
| 464 | /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so |
| 465 | * divide fclk by 1000000 to get the correct value. */ |
| 466 | val = - ((val * (state->fclk/1000000)) / (1<<24)); |
| 467 | |
| 468 | return val; |
| 469 | } |
| 470 | |
| 471 | static void s5h1420_setfec(struct s5h1420_state* state, struct dvb_frontend_parameters *p) |
| 472 | { |
| 473 | if ((p->u.qpsk.fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) { |
| 474 | s5h1420_writereg(state, 0x31, 0x00); |
| 475 | s5h1420_writereg(state, 0x30, 0x3f); |
| 476 | } else { |
| 477 | switch(p->u.qpsk.fec_inner) { |
| 478 | case FEC_1_2: |
| 479 | s5h1420_writereg(state, 0x31, 0x10); |
| 480 | s5h1420_writereg(state, 0x30, 0x01); |
| 481 | break; |
| 482 | |
| 483 | case FEC_2_3: |
| 484 | s5h1420_writereg(state, 0x31, 0x11); |
| 485 | s5h1420_writereg(state, 0x30, 0x02); |
| 486 | break; |
| 487 | |
| 488 | case FEC_3_4: |
| 489 | s5h1420_writereg(state, 0x31, 0x12); |
| 490 | s5h1420_writereg(state, 0x30, 0x04); |
| 491 | break; |
| 492 | |
| 493 | case FEC_5_6: |
| 494 | s5h1420_writereg(state, 0x31, 0x13); |
| 495 | s5h1420_writereg(state, 0x30, 0x08); |
| 496 | break; |
| 497 | |
| 498 | case FEC_6_7: |
| 499 | s5h1420_writereg(state, 0x31, 0x14); |
| 500 | s5h1420_writereg(state, 0x30, 0x10); |
| 501 | break; |
| 502 | |
| 503 | case FEC_7_8: |
| 504 | s5h1420_writereg(state, 0x31, 0x15); |
| 505 | s5h1420_writereg(state, 0x30, 0x20); |
| 506 | break; |
| 507 | |
| 508 | default: |
| 509 | return; |
| 510 | } |
| 511 | } |
| 512 | } |
| 513 | |
| 514 | static fe_code_rate_t s5h1420_getfec(struct s5h1420_state* state) |
| 515 | { |
| 516 | switch(s5h1420_readreg(state, 0x32) & 0x07) { |
| 517 | case 0: |
| 518 | return FEC_1_2; |
| 519 | |
| 520 | case 1: |
| 521 | return FEC_2_3; |
| 522 | |
| 523 | case 2: |
| 524 | return FEC_3_4; |
| 525 | |
| 526 | case 3: |
| 527 | return FEC_5_6; |
| 528 | |
| 529 | case 4: |
| 530 | return FEC_6_7; |
| 531 | |
| 532 | case 5: |
| 533 | return FEC_7_8; |
| 534 | } |
| 535 | |
| 536 | return FEC_NONE; |
| 537 | } |
| 538 | |
| 539 | static void s5h1420_setinversion(struct s5h1420_state* state, struct dvb_frontend_parameters *p) |
| 540 | { |
| 541 | if ((p->u.qpsk.fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) { |
| 542 | s5h1420_writereg(state, 0x31, 0x00); |
| 543 | s5h1420_writereg(state, 0x30, 0x3f); |
| 544 | } else { |
| 545 | u8 tmp = s5h1420_readreg(state, 0x31) & 0xf7; |
| 546 | tmp |= 0x10; |
| 547 | |
| 548 | if (p->inversion == INVERSION_ON) |
| 549 | tmp |= 0x80; |
| 550 | |
| 551 | s5h1420_writereg(state, 0x31, tmp); |
| 552 | } |
| 553 | } |
| 554 | |
| 555 | static fe_spectral_inversion_t s5h1420_getinversion(struct s5h1420_state* state) |
| 556 | { |
| 557 | if (s5h1420_readreg(state, 0x32) & 0x08) |
| 558 | return INVERSION_ON; |
| 559 | |
| 560 | return INVERSION_OFF; |
| 561 | } |
| 562 | |
| 563 | static int s5h1420_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| 564 | { |
| 565 | struct s5h1420_state* state = fe->demodulator_priv; |
| 566 | u32 frequency_delta; |
| 567 | struct dvb_frontend_tune_settings fesettings; |
| 568 | |
| 569 | /* check if we should do a fast-tune */ |
| 570 | memcpy(&fesettings.parameters, p, sizeof(struct dvb_frontend_parameters)); |
| 571 | s5h1420_get_tune_settings(fe, &fesettings); |
| 572 | frequency_delta = p->frequency - state->tunedfreq; |
| 573 | if ((frequency_delta > -fesettings.max_drift) && (frequency_delta < fesettings.max_drift) && |
| 574 | (frequency_delta != 0) && |
| 575 | (state->fec_inner == p->u.qpsk.fec_inner) && |
| 576 | (state->symbol_rate == p->u.qpsk.symbol_rate)) { |
| 577 | |
| 578 | s5h1420_setfreqoffset(state, frequency_delta); |
| 579 | return 0; |
| 580 | } |
| 581 | |
| 582 | /* first of all, software reset */ |
| 583 | s5h1420_reset(state); |
| 584 | |
| 585 | /* set tuner PLL */ |
| 586 | if (state->config->pll_set) { |
| 587 | s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) | 1); |
| 588 | state->config->pll_set(fe, p, &state->tunedfreq); |
| 589 | s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) & 0xfe); |
| 590 | } |
| 591 | |
| 592 | /* set s5h1420 fclk PLL according to desired symbol rate */ |
| 593 | if (p->u.qpsk.symbol_rate > 28000000) { |
| 594 | state->fclk = 88000000; |
| 595 | s5h1420_writereg(state, 0x03, 0x50); |
| 596 | s5h1420_writereg(state, 0x04, 0x40); |
| 597 | s5h1420_writereg(state, 0x05, 0xae); |
| 598 | } else if (p->u.qpsk.symbol_rate > 21000000) { |
| 599 | state->fclk = 59000000; |
| 600 | s5h1420_writereg(state, 0x03, 0x33); |
| 601 | s5h1420_writereg(state, 0x04, 0x40); |
| 602 | s5h1420_writereg(state, 0x05, 0xae); |
| 603 | } else { |
| 604 | state->fclk = 88000000; |
| 605 | s5h1420_writereg(state, 0x03, 0x50); |
| 606 | s5h1420_writereg(state, 0x04, 0x40); |
| 607 | s5h1420_writereg(state, 0x05, 0xac); |
| 608 | } |
| 609 | |
| 610 | /* set misc registers */ |
| 611 | s5h1420_writereg(state, 0x02, 0x00); |
| 612 | s5h1420_writereg(state, 0x07, 0xb0); |
| 613 | s5h1420_writereg(state, 0x0a, 0x67); |
| 614 | s5h1420_writereg(state, 0x0b, 0x78); |
| 615 | s5h1420_writereg(state, 0x0c, 0x48); |
| 616 | s5h1420_writereg(state, 0x0d, 0x6b); |
| 617 | s5h1420_writereg(state, 0x2e, 0x8e); |
| 618 | s5h1420_writereg(state, 0x35, 0x33); |
| 619 | s5h1420_writereg(state, 0x38, 0x01); |
| 620 | s5h1420_writereg(state, 0x39, 0x7d); |
| 621 | s5h1420_writereg(state, 0x3a, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); |
| 622 | s5h1420_writereg(state, 0x3c, 0x00); |
| 623 | s5h1420_writereg(state, 0x45, 0x61); |
| 624 | s5h1420_writereg(state, 0x46, 0x1d); |
| 625 | |
| 626 | /* start QPSK */ |
| 627 | s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) | 1); |
| 628 | |
| 629 | /* set the frequency offset to adjust for PLL inaccuracy */ |
| 630 | s5h1420_setfreqoffset(state, p->frequency - state->tunedfreq); |
| 631 | |
| 632 | /* set the reset of the parameters */ |
| 633 | s5h1420_setsymbolrate(state, p); |
| 634 | s5h1420_setinversion(state, p); |
| 635 | s5h1420_setfec(state, p); |
| 636 | |
| 637 | state->fec_inner = p->u.qpsk.fec_inner; |
| 638 | state->symbol_rate = p->u.qpsk.symbol_rate; |
| 639 | state->postlocked = 0; |
| 640 | return 0; |
| 641 | } |
| 642 | |
| 643 | static int s5h1420_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) |
| 644 | { |
| 645 | struct s5h1420_state* state = fe->demodulator_priv; |
| 646 | |
| 647 | p->frequency = state->tunedfreq + s5h1420_getfreqoffset(state); |
| 648 | p->inversion = s5h1420_getinversion(state); |
| 649 | p->u.qpsk.symbol_rate = s5h1420_getsymbolrate(state); |
| 650 | p->u.qpsk.fec_inner = s5h1420_getfec(state); |
| 651 | |
| 652 | return 0; |
| 653 | } |
| 654 | |
| 655 | static int s5h1420_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) |
| 656 | { |
| 657 | if (fesettings->parameters.u.qpsk.symbol_rate > 20000000) { |
| 658 | fesettings->min_delay_ms = 50; |
| 659 | fesettings->step_size = 2000; |
| 660 | fesettings->max_drift = 8000; |
| 661 | } else if (fesettings->parameters.u.qpsk.symbol_rate > 12000000) { |
| 662 | fesettings->min_delay_ms = 100; |
| 663 | fesettings->step_size = 1500; |
| 664 | fesettings->max_drift = 9000; |
| 665 | } else if (fesettings->parameters.u.qpsk.symbol_rate > 8000000) { |
| 666 | fesettings->min_delay_ms = 100; |
| 667 | fesettings->step_size = 1000; |
| 668 | fesettings->max_drift = 8000; |
| 669 | } else if (fesettings->parameters.u.qpsk.symbol_rate > 4000000) { |
| 670 | fesettings->min_delay_ms = 100; |
| 671 | fesettings->step_size = 500; |
| 672 | fesettings->max_drift = 7000; |
| 673 | } else if (fesettings->parameters.u.qpsk.symbol_rate > 2000000) { |
| 674 | fesettings->min_delay_ms = 200; |
| 675 | fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000); |
| 676 | fesettings->max_drift = 14 * fesettings->step_size; |
| 677 | } else { |
| 678 | fesettings->min_delay_ms = 200; |
| 679 | fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000); |
| 680 | fesettings->max_drift = 18 * fesettings->step_size; |
| 681 | } |
| 682 | |
| 683 | return 0; |
| 684 | } |
| 685 | |
| 686 | static int s5h1420_init (struct dvb_frontend* fe) |
| 687 | { |
| 688 | struct s5h1420_state* state = fe->demodulator_priv; |
| 689 | |
| 690 | /* disable power down and do reset */ |
| 691 | s5h1420_writereg(state, 0x02, 0x10); |
| 692 | msleep(10); |
| 693 | s5h1420_reset(state); |
| 694 | |
| 695 | /* init PLL */ |
| 696 | if (state->config->pll_init) { |
| 697 | s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) | 1); |
| 698 | state->config->pll_init(fe); |
| 699 | s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) & 0xfe); |
| 700 | } |
| 701 | |
| 702 | return 0; |
| 703 | } |
| 704 | |
| 705 | static int s5h1420_sleep(struct dvb_frontend* fe) |
| 706 | { |
| 707 | struct s5h1420_state* state = fe->demodulator_priv; |
| 708 | |
| 709 | return s5h1420_writereg(state, 0x02, 0x12); |
| 710 | } |
| 711 | |
| 712 | static void s5h1420_release(struct dvb_frontend* fe) |
| 713 | { |
| 714 | struct s5h1420_state* state = fe->demodulator_priv; |
| 715 | kfree(state); |
| 716 | } |
| 717 | |
| 718 | static struct dvb_frontend_ops s5h1420_ops; |
| 719 | |
| 720 | struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, struct i2c_adapter* i2c) |
| 721 | { |
| 722 | struct s5h1420_state* state = NULL; |
| 723 | u8 identity; |
| 724 | |
| 725 | /* allocate memory for the internal state */ |
| 726 | state = kmalloc(sizeof(struct s5h1420_state), GFP_KERNEL); |
| 727 | if (state == NULL) |
| 728 | goto error; |
| 729 | |
| 730 | /* setup the state */ |
| 731 | state->config = config; |
| 732 | state->i2c = i2c; |
| 733 | memcpy(&state->ops, &s5h1420_ops, sizeof(struct dvb_frontend_ops)); |
| 734 | state->postlocked = 0; |
| 735 | state->fclk = 88000000; |
| 736 | state->tunedfreq = 0; |
| 737 | state->fec_inner = FEC_NONE; |
| 738 | state->symbol_rate = 0; |
| 739 | |
| 740 | /* check if the demod is there + identify it */ |
| 741 | identity = s5h1420_readreg(state, 0x00); |
| 742 | if (identity != 0x03) |
| 743 | goto error; |
| 744 | |
| 745 | /* create dvb_frontend */ |
| 746 | state->frontend.ops = &state->ops; |
| 747 | state->frontend.demodulator_priv = state; |
| 748 | return &state->frontend; |
| 749 | |
| 750 | error: |
| 751 | kfree(state); |
| 752 | return NULL; |
| 753 | } |
| 754 | |
| 755 | static struct dvb_frontend_ops s5h1420_ops = { |
| 756 | |
| 757 | .info = { |
| 758 | .name = "Samsung S5H1420 DVB-S", |
| 759 | .type = FE_QPSK, |
| 760 | .frequency_min = 950000, |
| 761 | .frequency_max = 2150000, |
| 762 | .frequency_stepsize = 125, /* kHz for QPSK frontends */ |
| 763 | .frequency_tolerance = 29500, |
| 764 | .symbol_rate_min = 1000000, |
| 765 | .symbol_rate_max = 45000000, |
| 766 | /* .symbol_rate_tolerance = ???,*/ |
| 767 | .caps = FE_CAN_INVERSION_AUTO | |
| 768 | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| 769 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| 770 | FE_CAN_QPSK |
| 771 | }, |
| 772 | |
| 773 | .release = s5h1420_release, |
| 774 | |
| 775 | .init = s5h1420_init, |
| 776 | .sleep = s5h1420_sleep, |
| 777 | |
| 778 | .set_frontend = s5h1420_set_frontend, |
| 779 | .get_frontend = s5h1420_get_frontend, |
| 780 | .get_tune_settings = s5h1420_get_tune_settings, |
| 781 | |
| 782 | .read_status = s5h1420_read_status, |
| 783 | .read_ber = s5h1420_read_ber, |
| 784 | .read_signal_strength = s5h1420_read_signal_strength, |
| 785 | .read_ucblocks = s5h1420_read_ucblocks, |
| 786 | |
| 787 | .diseqc_send_master_cmd = s5h1420_send_master_cmd, |
| 788 | .diseqc_recv_slave_reply = s5h1420_recv_slave_reply, |
| 789 | .diseqc_send_burst = s5h1420_send_burst, |
| 790 | .set_tone = s5h1420_set_tone, |
| 791 | .set_voltage = s5h1420_set_voltage, |
| 792 | }; |
| 793 | |
| 794 | module_param(debug, int, 0644); |
| 795 | |
| 796 | MODULE_DESCRIPTION("Samsung S5H1420 DVB-S Demodulator driver"); |
| 797 | MODULE_AUTHOR("Andrew de Quincey"); |
| 798 | MODULE_LICENSE("GPL"); |
| 799 | |
| 800 | EXPORT_SYMBOL(s5h1420_attach); |