Stefan Weinhuber | 8e09f21 | 2008-01-26 14:11:23 +0100 | [diff] [blame^] | 1 | /* |
| 2 | * PAV alias management for the DASD ECKD discipline |
| 3 | * |
| 4 | * Copyright IBM Corporation, 2007 |
| 5 | * Author(s): Stefan Weinhuber <wein@de.ibm.com> |
| 6 | */ |
| 7 | |
| 8 | #include <linux/list.h> |
| 9 | #include <asm/ebcdic.h> |
| 10 | #include "dasd_int.h" |
| 11 | #include "dasd_eckd.h" |
| 12 | |
| 13 | #ifdef PRINTK_HEADER |
| 14 | #undef PRINTK_HEADER |
| 15 | #endif /* PRINTK_HEADER */ |
| 16 | #define PRINTK_HEADER "dasd(eckd):" |
| 17 | |
| 18 | |
| 19 | /* |
| 20 | * General concept of alias management: |
| 21 | * - PAV and DASD alias management is specific to the eckd discipline. |
| 22 | * - A device is connected to an lcu as long as the device exists. |
| 23 | * dasd_alias_make_device_known_to_lcu will be called wenn the |
| 24 | * device is checked by the eckd discipline and |
| 25 | * dasd_alias_disconnect_device_from_lcu will be called |
| 26 | * before the device is deleted. |
| 27 | * - The dasd_alias_add_device / dasd_alias_remove_device |
| 28 | * functions mark the point when a device is 'ready for service'. |
| 29 | * - A summary unit check is a rare occasion, but it is mandatory to |
| 30 | * support it. It requires some complex recovery actions before the |
| 31 | * devices can be used again (see dasd_alias_handle_summary_unit_check). |
| 32 | * - dasd_alias_get_start_dev will find an alias device that can be used |
| 33 | * instead of the base device and does some (very simple) load balancing. |
| 34 | * This is the function that gets called for each I/O, so when improving |
| 35 | * something, this function should get faster or better, the rest has just |
| 36 | * to be correct. |
| 37 | */ |
| 38 | |
| 39 | |
| 40 | static void summary_unit_check_handling_work(struct work_struct *); |
| 41 | static void lcu_update_work(struct work_struct *); |
| 42 | static int _schedule_lcu_update(struct alias_lcu *, struct dasd_device *); |
| 43 | |
| 44 | static struct alias_root aliastree = { |
| 45 | .serverlist = LIST_HEAD_INIT(aliastree.serverlist), |
| 46 | .lock = __SPIN_LOCK_UNLOCKED(aliastree.lock), |
| 47 | }; |
| 48 | |
| 49 | static struct alias_server *_find_server(struct dasd_uid *uid) |
| 50 | { |
| 51 | struct alias_server *pos; |
| 52 | list_for_each_entry(pos, &aliastree.serverlist, server) { |
| 53 | if (!strncmp(pos->uid.vendor, uid->vendor, |
| 54 | sizeof(uid->vendor)) |
| 55 | && !strncmp(pos->uid.serial, uid->serial, |
| 56 | sizeof(uid->serial))) |
| 57 | return pos; |
| 58 | }; |
| 59 | return NULL; |
| 60 | } |
| 61 | |
| 62 | static struct alias_lcu *_find_lcu(struct alias_server *server, |
| 63 | struct dasd_uid *uid) |
| 64 | { |
| 65 | struct alias_lcu *pos; |
| 66 | list_for_each_entry(pos, &server->lculist, lcu) { |
| 67 | if (pos->uid.ssid == uid->ssid) |
| 68 | return pos; |
| 69 | }; |
| 70 | return NULL; |
| 71 | } |
| 72 | |
| 73 | static struct alias_pav_group *_find_group(struct alias_lcu *lcu, |
| 74 | struct dasd_uid *uid) |
| 75 | { |
| 76 | struct alias_pav_group *pos; |
| 77 | __u8 search_unit_addr; |
| 78 | |
| 79 | /* for hyper pav there is only one group */ |
| 80 | if (lcu->pav == HYPER_PAV) { |
| 81 | if (list_empty(&lcu->grouplist)) |
| 82 | return NULL; |
| 83 | else |
| 84 | return list_first_entry(&lcu->grouplist, |
| 85 | struct alias_pav_group, group); |
| 86 | } |
| 87 | |
| 88 | /* for base pav we have to find the group that matches the base */ |
| 89 | if (uid->type == UA_BASE_DEVICE) |
| 90 | search_unit_addr = uid->real_unit_addr; |
| 91 | else |
| 92 | search_unit_addr = uid->base_unit_addr; |
| 93 | list_for_each_entry(pos, &lcu->grouplist, group) { |
| 94 | if (pos->uid.base_unit_addr == search_unit_addr) |
| 95 | return pos; |
| 96 | }; |
| 97 | return NULL; |
| 98 | } |
| 99 | |
| 100 | static struct alias_server *_allocate_server(struct dasd_uid *uid) |
| 101 | { |
| 102 | struct alias_server *server; |
| 103 | |
| 104 | server = kzalloc(sizeof(*server), GFP_KERNEL); |
| 105 | if (!server) |
| 106 | return ERR_PTR(-ENOMEM); |
| 107 | memcpy(server->uid.vendor, uid->vendor, sizeof(uid->vendor)); |
| 108 | memcpy(server->uid.serial, uid->serial, sizeof(uid->serial)); |
| 109 | INIT_LIST_HEAD(&server->server); |
| 110 | INIT_LIST_HEAD(&server->lculist); |
| 111 | return server; |
| 112 | } |
| 113 | |
| 114 | static void _free_server(struct alias_server *server) |
| 115 | { |
| 116 | kfree(server); |
| 117 | } |
| 118 | |
| 119 | static struct alias_lcu *_allocate_lcu(struct dasd_uid *uid) |
| 120 | { |
| 121 | struct alias_lcu *lcu; |
| 122 | |
| 123 | lcu = kzalloc(sizeof(*lcu), GFP_KERNEL); |
| 124 | if (!lcu) |
| 125 | return ERR_PTR(-ENOMEM); |
| 126 | lcu->uac = kzalloc(sizeof(*(lcu->uac)), GFP_KERNEL | GFP_DMA); |
| 127 | if (!lcu->uac) |
| 128 | goto out_err1; |
| 129 | lcu->rsu_cqr = kzalloc(sizeof(*lcu->rsu_cqr), GFP_KERNEL | GFP_DMA); |
| 130 | if (!lcu->rsu_cqr) |
| 131 | goto out_err2; |
| 132 | lcu->rsu_cqr->cpaddr = kzalloc(sizeof(struct ccw1), |
| 133 | GFP_KERNEL | GFP_DMA); |
| 134 | if (!lcu->rsu_cqr->cpaddr) |
| 135 | goto out_err3; |
| 136 | lcu->rsu_cqr->data = kzalloc(16, GFP_KERNEL | GFP_DMA); |
| 137 | if (!lcu->rsu_cqr->data) |
| 138 | goto out_err4; |
| 139 | |
| 140 | memcpy(lcu->uid.vendor, uid->vendor, sizeof(uid->vendor)); |
| 141 | memcpy(lcu->uid.serial, uid->serial, sizeof(uid->serial)); |
| 142 | lcu->uid.ssid = uid->ssid; |
| 143 | lcu->pav = NO_PAV; |
| 144 | lcu->flags = NEED_UAC_UPDATE | UPDATE_PENDING; |
| 145 | INIT_LIST_HEAD(&lcu->lcu); |
| 146 | INIT_LIST_HEAD(&lcu->inactive_devices); |
| 147 | INIT_LIST_HEAD(&lcu->active_devices); |
| 148 | INIT_LIST_HEAD(&lcu->grouplist); |
| 149 | INIT_WORK(&lcu->suc_data.worker, summary_unit_check_handling_work); |
| 150 | INIT_DELAYED_WORK(&lcu->ruac_data.dwork, lcu_update_work); |
| 151 | spin_lock_init(&lcu->lock); |
| 152 | return lcu; |
| 153 | |
| 154 | out_err4: |
| 155 | kfree(lcu->rsu_cqr->cpaddr); |
| 156 | out_err3: |
| 157 | kfree(lcu->rsu_cqr); |
| 158 | out_err2: |
| 159 | kfree(lcu->uac); |
| 160 | out_err1: |
| 161 | kfree(lcu); |
| 162 | return ERR_PTR(-ENOMEM); |
| 163 | } |
| 164 | |
| 165 | static void _free_lcu(struct alias_lcu *lcu) |
| 166 | { |
| 167 | kfree(lcu->rsu_cqr->data); |
| 168 | kfree(lcu->rsu_cqr->cpaddr); |
| 169 | kfree(lcu->rsu_cqr); |
| 170 | kfree(lcu->uac); |
| 171 | kfree(lcu); |
| 172 | } |
| 173 | |
| 174 | /* |
| 175 | * This is the function that will allocate all the server and lcu data, |
| 176 | * so this function must be called first for a new device. |
| 177 | * If the return value is 1, the lcu was already known before, if it |
| 178 | * is 0, this is a new lcu. |
| 179 | * Negative return code indicates that something went wrong (e.g. -ENOMEM) |
| 180 | */ |
| 181 | int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) |
| 182 | { |
| 183 | struct dasd_eckd_private *private; |
| 184 | unsigned long flags; |
| 185 | struct alias_server *server, *newserver; |
| 186 | struct alias_lcu *lcu, *newlcu; |
| 187 | int is_lcu_known; |
| 188 | struct dasd_uid *uid; |
| 189 | |
| 190 | private = (struct dasd_eckd_private *) device->private; |
| 191 | uid = &private->uid; |
| 192 | spin_lock_irqsave(&aliastree.lock, flags); |
| 193 | is_lcu_known = 1; |
| 194 | server = _find_server(uid); |
| 195 | if (!server) { |
| 196 | spin_unlock_irqrestore(&aliastree.lock, flags); |
| 197 | newserver = _allocate_server(uid); |
| 198 | if (IS_ERR(newserver)) |
| 199 | return PTR_ERR(newserver); |
| 200 | spin_lock_irqsave(&aliastree.lock, flags); |
| 201 | server = _find_server(uid); |
| 202 | if (!server) { |
| 203 | list_add(&newserver->server, &aliastree.serverlist); |
| 204 | server = newserver; |
| 205 | is_lcu_known = 0; |
| 206 | } else { |
| 207 | /* someone was faster */ |
| 208 | _free_server(newserver); |
| 209 | } |
| 210 | } |
| 211 | |
| 212 | lcu = _find_lcu(server, uid); |
| 213 | if (!lcu) { |
| 214 | spin_unlock_irqrestore(&aliastree.lock, flags); |
| 215 | newlcu = _allocate_lcu(uid); |
| 216 | if (IS_ERR(newlcu)) |
| 217 | return PTR_ERR(lcu); |
| 218 | spin_lock_irqsave(&aliastree.lock, flags); |
| 219 | lcu = _find_lcu(server, uid); |
| 220 | if (!lcu) { |
| 221 | list_add(&newlcu->lcu, &server->lculist); |
| 222 | lcu = newlcu; |
| 223 | is_lcu_known = 0; |
| 224 | } else { |
| 225 | /* someone was faster */ |
| 226 | _free_lcu(newlcu); |
| 227 | } |
| 228 | is_lcu_known = 0; |
| 229 | } |
| 230 | spin_lock(&lcu->lock); |
| 231 | list_add(&device->alias_list, &lcu->inactive_devices); |
| 232 | private->lcu = lcu; |
| 233 | spin_unlock(&lcu->lock); |
| 234 | spin_unlock_irqrestore(&aliastree.lock, flags); |
| 235 | |
| 236 | return is_lcu_known; |
| 237 | } |
| 238 | |
| 239 | /* |
| 240 | * This function removes a device from the scope of alias management. |
| 241 | * The complicated part is to make sure that it is not in use by |
| 242 | * any of the workers. If necessary cancel the work. |
| 243 | */ |
| 244 | void dasd_alias_disconnect_device_from_lcu(struct dasd_device *device) |
| 245 | { |
| 246 | struct dasd_eckd_private *private; |
| 247 | unsigned long flags; |
| 248 | struct alias_lcu *lcu; |
| 249 | struct alias_server *server; |
| 250 | int was_pending; |
| 251 | |
| 252 | private = (struct dasd_eckd_private *) device->private; |
| 253 | lcu = private->lcu; |
| 254 | spin_lock_irqsave(&lcu->lock, flags); |
| 255 | list_del_init(&device->alias_list); |
| 256 | /* make sure that the workers don't use this device */ |
| 257 | if (device == lcu->suc_data.device) { |
| 258 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 259 | cancel_work_sync(&lcu->suc_data.worker); |
| 260 | spin_lock_irqsave(&lcu->lock, flags); |
| 261 | if (device == lcu->suc_data.device) |
| 262 | lcu->suc_data.device = NULL; |
| 263 | } |
| 264 | was_pending = 0; |
| 265 | if (device == lcu->ruac_data.device) { |
| 266 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 267 | was_pending = 1; |
| 268 | cancel_delayed_work_sync(&lcu->ruac_data.dwork); |
| 269 | spin_lock_irqsave(&lcu->lock, flags); |
| 270 | if (device == lcu->ruac_data.device) |
| 271 | lcu->ruac_data.device = NULL; |
| 272 | } |
| 273 | private->lcu = NULL; |
| 274 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 275 | |
| 276 | spin_lock_irqsave(&aliastree.lock, flags); |
| 277 | spin_lock(&lcu->lock); |
| 278 | if (list_empty(&lcu->grouplist) && |
| 279 | list_empty(&lcu->active_devices) && |
| 280 | list_empty(&lcu->inactive_devices)) { |
| 281 | list_del(&lcu->lcu); |
| 282 | spin_unlock(&lcu->lock); |
| 283 | _free_lcu(lcu); |
| 284 | lcu = NULL; |
| 285 | } else { |
| 286 | if (was_pending) |
| 287 | _schedule_lcu_update(lcu, NULL); |
| 288 | spin_unlock(&lcu->lock); |
| 289 | } |
| 290 | server = _find_server(&private->uid); |
| 291 | if (server && list_empty(&server->lculist)) { |
| 292 | list_del(&server->server); |
| 293 | _free_server(server); |
| 294 | } |
| 295 | spin_unlock_irqrestore(&aliastree.lock, flags); |
| 296 | } |
| 297 | |
| 298 | /* |
| 299 | * This function assumes that the unit address configuration stored |
| 300 | * in the lcu is up to date and will update the device uid before |
| 301 | * adding it to a pav group. |
| 302 | */ |
| 303 | static int _add_device_to_lcu(struct alias_lcu *lcu, |
| 304 | struct dasd_device *device) |
| 305 | { |
| 306 | |
| 307 | struct dasd_eckd_private *private; |
| 308 | struct alias_pav_group *group; |
| 309 | struct dasd_uid *uid; |
| 310 | |
| 311 | private = (struct dasd_eckd_private *) device->private; |
| 312 | uid = &private->uid; |
| 313 | uid->type = lcu->uac->unit[uid->real_unit_addr].ua_type; |
| 314 | uid->base_unit_addr = lcu->uac->unit[uid->real_unit_addr].base_ua; |
| 315 | dasd_set_uid(device->cdev, &private->uid); |
| 316 | |
| 317 | /* if we have no PAV anyway, we don't need to bother with PAV groups */ |
| 318 | if (lcu->pav == NO_PAV) { |
| 319 | list_move(&device->alias_list, &lcu->active_devices); |
| 320 | return 0; |
| 321 | } |
| 322 | |
| 323 | group = _find_group(lcu, uid); |
| 324 | if (!group) { |
| 325 | group = kzalloc(sizeof(*group), GFP_ATOMIC); |
| 326 | if (!group) |
| 327 | return -ENOMEM; |
| 328 | memcpy(group->uid.vendor, uid->vendor, sizeof(uid->vendor)); |
| 329 | memcpy(group->uid.serial, uid->serial, sizeof(uid->serial)); |
| 330 | group->uid.ssid = uid->ssid; |
| 331 | if (uid->type == UA_BASE_DEVICE) |
| 332 | group->uid.base_unit_addr = uid->real_unit_addr; |
| 333 | else |
| 334 | group->uid.base_unit_addr = uid->base_unit_addr; |
| 335 | INIT_LIST_HEAD(&group->group); |
| 336 | INIT_LIST_HEAD(&group->baselist); |
| 337 | INIT_LIST_HEAD(&group->aliaslist); |
| 338 | list_add(&group->group, &lcu->grouplist); |
| 339 | } |
| 340 | if (uid->type == UA_BASE_DEVICE) |
| 341 | list_move(&device->alias_list, &group->baselist); |
| 342 | else |
| 343 | list_move(&device->alias_list, &group->aliaslist); |
| 344 | private->pavgroup = group; |
| 345 | return 0; |
| 346 | }; |
| 347 | |
| 348 | static void _remove_device_from_lcu(struct alias_lcu *lcu, |
| 349 | struct dasd_device *device) |
| 350 | { |
| 351 | struct dasd_eckd_private *private; |
| 352 | struct alias_pav_group *group; |
| 353 | |
| 354 | private = (struct dasd_eckd_private *) device->private; |
| 355 | list_move(&device->alias_list, &lcu->inactive_devices); |
| 356 | group = private->pavgroup; |
| 357 | if (!group) |
| 358 | return; |
| 359 | private->pavgroup = NULL; |
| 360 | if (list_empty(&group->baselist) && list_empty(&group->aliaslist)) { |
| 361 | list_del(&group->group); |
| 362 | kfree(group); |
| 363 | return; |
| 364 | } |
| 365 | if (group->next == device) |
| 366 | group->next = NULL; |
| 367 | }; |
| 368 | |
| 369 | static int read_unit_address_configuration(struct dasd_device *device, |
| 370 | struct alias_lcu *lcu) |
| 371 | { |
| 372 | struct dasd_psf_prssd_data *prssdp; |
| 373 | struct dasd_ccw_req *cqr; |
| 374 | struct ccw1 *ccw; |
| 375 | int rc; |
| 376 | unsigned long flags; |
| 377 | |
| 378 | cqr = dasd_kmalloc_request("ECKD", |
| 379 | 1 /* PSF */ + 1 /* RSSD */ , |
| 380 | (sizeof(struct dasd_psf_prssd_data)), |
| 381 | device); |
| 382 | if (IS_ERR(cqr)) |
| 383 | return PTR_ERR(cqr); |
| 384 | cqr->startdev = device; |
| 385 | cqr->memdev = device; |
| 386 | clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); |
| 387 | cqr->retries = 10; |
| 388 | cqr->expires = 20 * HZ; |
| 389 | |
| 390 | /* Prepare for Read Subsystem Data */ |
| 391 | prssdp = (struct dasd_psf_prssd_data *) cqr->data; |
| 392 | memset(prssdp, 0, sizeof(struct dasd_psf_prssd_data)); |
| 393 | prssdp->order = PSF_ORDER_PRSSD; |
| 394 | prssdp->suborder = 0x0e; /* Read unit address configuration */ |
| 395 | /* all other bytes of prssdp must be zero */ |
| 396 | |
| 397 | ccw = cqr->cpaddr; |
| 398 | ccw->cmd_code = DASD_ECKD_CCW_PSF; |
| 399 | ccw->count = sizeof(struct dasd_psf_prssd_data); |
| 400 | ccw->flags |= CCW_FLAG_CC; |
| 401 | ccw->cda = (__u32)(addr_t) prssdp; |
| 402 | |
| 403 | /* Read Subsystem Data - feature codes */ |
| 404 | memset(lcu->uac, 0, sizeof(*(lcu->uac))); |
| 405 | |
| 406 | ccw++; |
| 407 | ccw->cmd_code = DASD_ECKD_CCW_RSSD; |
| 408 | ccw->count = sizeof(*(lcu->uac)); |
| 409 | ccw->cda = (__u32)(addr_t) lcu->uac; |
| 410 | |
| 411 | cqr->buildclk = get_clock(); |
| 412 | cqr->status = DASD_CQR_FILLED; |
| 413 | |
| 414 | /* need to unset flag here to detect race with summary unit check */ |
| 415 | spin_lock_irqsave(&lcu->lock, flags); |
| 416 | lcu->flags &= ~NEED_UAC_UPDATE; |
| 417 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 418 | |
| 419 | do { |
| 420 | rc = dasd_sleep_on(cqr); |
| 421 | } while (rc && (cqr->retries > 0)); |
| 422 | if (rc) { |
| 423 | spin_lock_irqsave(&lcu->lock, flags); |
| 424 | lcu->flags |= NEED_UAC_UPDATE; |
| 425 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 426 | } |
| 427 | dasd_kfree_request(cqr, cqr->memdev); |
| 428 | return rc; |
| 429 | } |
| 430 | |
| 431 | static int _lcu_update(struct dasd_device *refdev, struct alias_lcu *lcu) |
| 432 | { |
| 433 | unsigned long flags; |
| 434 | struct alias_pav_group *pavgroup, *tempgroup; |
| 435 | struct dasd_device *device, *tempdev; |
| 436 | int i, rc; |
| 437 | struct dasd_eckd_private *private; |
| 438 | |
| 439 | spin_lock_irqsave(&lcu->lock, flags); |
| 440 | list_for_each_entry_safe(pavgroup, tempgroup, &lcu->grouplist, group) { |
| 441 | list_for_each_entry_safe(device, tempdev, &pavgroup->baselist, |
| 442 | alias_list) { |
| 443 | list_move(&device->alias_list, &lcu->active_devices); |
| 444 | private = (struct dasd_eckd_private *) device->private; |
| 445 | private->pavgroup = NULL; |
| 446 | } |
| 447 | list_for_each_entry_safe(device, tempdev, &pavgroup->aliaslist, |
| 448 | alias_list) { |
| 449 | list_move(&device->alias_list, &lcu->active_devices); |
| 450 | private = (struct dasd_eckd_private *) device->private; |
| 451 | private->pavgroup = NULL; |
| 452 | } |
| 453 | list_del(&pavgroup->group); |
| 454 | kfree(pavgroup); |
| 455 | } |
| 456 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 457 | |
| 458 | rc = read_unit_address_configuration(refdev, lcu); |
| 459 | if (rc) |
| 460 | return rc; |
| 461 | |
| 462 | spin_lock_irqsave(&lcu->lock, flags); |
| 463 | lcu->pav = NO_PAV; |
| 464 | for (i = 0; i < MAX_DEVICES_PER_LCU; ++i) { |
| 465 | switch (lcu->uac->unit[i].ua_type) { |
| 466 | case UA_BASE_PAV_ALIAS: |
| 467 | lcu->pav = BASE_PAV; |
| 468 | break; |
| 469 | case UA_HYPER_PAV_ALIAS: |
| 470 | lcu->pav = HYPER_PAV; |
| 471 | break; |
| 472 | } |
| 473 | if (lcu->pav != NO_PAV) |
| 474 | break; |
| 475 | } |
| 476 | |
| 477 | list_for_each_entry_safe(device, tempdev, &lcu->active_devices, |
| 478 | alias_list) { |
| 479 | _add_device_to_lcu(lcu, device); |
| 480 | } |
| 481 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 482 | return 0; |
| 483 | } |
| 484 | |
| 485 | static void lcu_update_work(struct work_struct *work) |
| 486 | { |
| 487 | struct alias_lcu *lcu; |
| 488 | struct read_uac_work_data *ruac_data; |
| 489 | struct dasd_device *device; |
| 490 | unsigned long flags; |
| 491 | int rc; |
| 492 | |
| 493 | ruac_data = container_of(work, struct read_uac_work_data, dwork.work); |
| 494 | lcu = container_of(ruac_data, struct alias_lcu, ruac_data); |
| 495 | device = ruac_data->device; |
| 496 | rc = _lcu_update(device, lcu); |
| 497 | /* |
| 498 | * Need to check flags again, as there could have been another |
| 499 | * prepare_update or a new device a new device while we were still |
| 500 | * processing the data |
| 501 | */ |
| 502 | spin_lock_irqsave(&lcu->lock, flags); |
| 503 | if (rc || (lcu->flags & NEED_UAC_UPDATE)) { |
| 504 | DEV_MESSAGE(KERN_WARNING, device, "could not update" |
| 505 | " alias data in lcu (rc = %d), retry later", rc); |
| 506 | schedule_delayed_work(&lcu->ruac_data.dwork, 30*HZ); |
| 507 | } else { |
| 508 | lcu->ruac_data.device = NULL; |
| 509 | lcu->flags &= ~UPDATE_PENDING; |
| 510 | } |
| 511 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 512 | } |
| 513 | |
| 514 | static int _schedule_lcu_update(struct alias_lcu *lcu, |
| 515 | struct dasd_device *device) |
| 516 | { |
| 517 | struct dasd_device *usedev = NULL; |
| 518 | struct alias_pav_group *group; |
| 519 | |
| 520 | lcu->flags |= NEED_UAC_UPDATE; |
| 521 | if (lcu->ruac_data.device) { |
| 522 | /* already scheduled or running */ |
| 523 | return 0; |
| 524 | } |
| 525 | if (device && !list_empty(&device->alias_list)) |
| 526 | usedev = device; |
| 527 | |
| 528 | if (!usedev && !list_empty(&lcu->grouplist)) { |
| 529 | group = list_first_entry(&lcu->grouplist, |
| 530 | struct alias_pav_group, group); |
| 531 | if (!list_empty(&group->baselist)) |
| 532 | usedev = list_first_entry(&group->baselist, |
| 533 | struct dasd_device, |
| 534 | alias_list); |
| 535 | else if (!list_empty(&group->aliaslist)) |
| 536 | usedev = list_first_entry(&group->aliaslist, |
| 537 | struct dasd_device, |
| 538 | alias_list); |
| 539 | } |
| 540 | if (!usedev && !list_empty(&lcu->active_devices)) { |
| 541 | usedev = list_first_entry(&lcu->active_devices, |
| 542 | struct dasd_device, alias_list); |
| 543 | } |
| 544 | /* |
| 545 | * if we haven't found a proper device yet, give up for now, the next |
| 546 | * device that will be set active will trigger an lcu update |
| 547 | */ |
| 548 | if (!usedev) |
| 549 | return -EINVAL; |
| 550 | lcu->ruac_data.device = usedev; |
| 551 | schedule_delayed_work(&lcu->ruac_data.dwork, 0); |
| 552 | return 0; |
| 553 | } |
| 554 | |
| 555 | int dasd_alias_add_device(struct dasd_device *device) |
| 556 | { |
| 557 | struct dasd_eckd_private *private; |
| 558 | struct alias_lcu *lcu; |
| 559 | unsigned long flags; |
| 560 | int rc; |
| 561 | |
| 562 | private = (struct dasd_eckd_private *) device->private; |
| 563 | lcu = private->lcu; |
| 564 | rc = 0; |
| 565 | spin_lock_irqsave(&lcu->lock, flags); |
| 566 | if (!(lcu->flags & UPDATE_PENDING)) { |
| 567 | rc = _add_device_to_lcu(lcu, device); |
| 568 | if (rc) |
| 569 | lcu->flags |= UPDATE_PENDING; |
| 570 | } |
| 571 | if (lcu->flags & UPDATE_PENDING) { |
| 572 | list_move(&device->alias_list, &lcu->active_devices); |
| 573 | _schedule_lcu_update(lcu, device); |
| 574 | } |
| 575 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 576 | return rc; |
| 577 | } |
| 578 | |
| 579 | int dasd_alias_remove_device(struct dasd_device *device) |
| 580 | { |
| 581 | struct dasd_eckd_private *private; |
| 582 | struct alias_lcu *lcu; |
| 583 | unsigned long flags; |
| 584 | |
| 585 | private = (struct dasd_eckd_private *) device->private; |
| 586 | lcu = private->lcu; |
| 587 | spin_lock_irqsave(&lcu->lock, flags); |
| 588 | _remove_device_from_lcu(lcu, device); |
| 589 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 590 | return 0; |
| 591 | } |
| 592 | |
| 593 | struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) |
| 594 | { |
| 595 | |
| 596 | struct dasd_device *alias_device; |
| 597 | struct alias_pav_group *group; |
| 598 | struct alias_lcu *lcu; |
| 599 | struct dasd_eckd_private *private, *alias_priv; |
| 600 | unsigned long flags; |
| 601 | |
| 602 | private = (struct dasd_eckd_private *) base_device->private; |
| 603 | group = private->pavgroup; |
| 604 | lcu = private->lcu; |
| 605 | if (!group || !lcu) |
| 606 | return NULL; |
| 607 | if (lcu->pav == NO_PAV || |
| 608 | lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING)) |
| 609 | return NULL; |
| 610 | |
| 611 | spin_lock_irqsave(&lcu->lock, flags); |
| 612 | alias_device = group->next; |
| 613 | if (!alias_device) { |
| 614 | if (list_empty(&group->aliaslist)) { |
| 615 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 616 | return NULL; |
| 617 | } else { |
| 618 | alias_device = list_first_entry(&group->aliaslist, |
| 619 | struct dasd_device, |
| 620 | alias_list); |
| 621 | } |
| 622 | } |
| 623 | if (list_is_last(&alias_device->alias_list, &group->aliaslist)) |
| 624 | group->next = list_first_entry(&group->aliaslist, |
| 625 | struct dasd_device, alias_list); |
| 626 | else |
| 627 | group->next = list_first_entry(&alias_device->alias_list, |
| 628 | struct dasd_device, alias_list); |
| 629 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 630 | alias_priv = (struct dasd_eckd_private *) alias_device->private; |
| 631 | if ((alias_priv->count < private->count) && !alias_device->stopped) |
| 632 | return alias_device; |
| 633 | else |
| 634 | return NULL; |
| 635 | } |
| 636 | |
| 637 | /* |
| 638 | * Summary unit check handling depends on the way alias devices |
| 639 | * are handled so it is done here rather then in dasd_eckd.c |
| 640 | */ |
| 641 | static int reset_summary_unit_check(struct alias_lcu *lcu, |
| 642 | struct dasd_device *device, |
| 643 | char reason) |
| 644 | { |
| 645 | struct dasd_ccw_req *cqr; |
| 646 | int rc = 0; |
| 647 | |
| 648 | cqr = lcu->rsu_cqr; |
| 649 | strncpy((char *) &cqr->magic, "ECKD", 4); |
| 650 | ASCEBC((char *) &cqr->magic, 4); |
| 651 | cqr->cpaddr->cmd_code = DASD_ECKD_CCW_RSCK; |
| 652 | cqr->cpaddr->flags = 0 ; |
| 653 | cqr->cpaddr->count = 16; |
| 654 | cqr->cpaddr->cda = (__u32)(addr_t) cqr->data; |
| 655 | ((char *)cqr->data)[0] = reason; |
| 656 | |
| 657 | clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); |
| 658 | cqr->retries = 255; /* set retry counter to enable basic ERP */ |
| 659 | cqr->startdev = device; |
| 660 | cqr->memdev = device; |
| 661 | cqr->block = NULL; |
| 662 | cqr->expires = 5 * HZ; |
| 663 | cqr->buildclk = get_clock(); |
| 664 | cqr->status = DASD_CQR_FILLED; |
| 665 | |
| 666 | rc = dasd_sleep_on_immediatly(cqr); |
| 667 | return rc; |
| 668 | } |
| 669 | |
| 670 | static void _restart_all_base_devices_on_lcu(struct alias_lcu *lcu) |
| 671 | { |
| 672 | struct alias_pav_group *pavgroup; |
| 673 | struct dasd_device *device; |
| 674 | struct dasd_eckd_private *private; |
| 675 | |
| 676 | /* active and inactive list can contain alias as well as base devices */ |
| 677 | list_for_each_entry(device, &lcu->active_devices, alias_list) { |
| 678 | private = (struct dasd_eckd_private *) device->private; |
| 679 | if (private->uid.type != UA_BASE_DEVICE) |
| 680 | continue; |
| 681 | dasd_schedule_block_bh(device->block); |
| 682 | dasd_schedule_device_bh(device); |
| 683 | } |
| 684 | list_for_each_entry(device, &lcu->inactive_devices, alias_list) { |
| 685 | private = (struct dasd_eckd_private *) device->private; |
| 686 | if (private->uid.type != UA_BASE_DEVICE) |
| 687 | continue; |
| 688 | dasd_schedule_block_bh(device->block); |
| 689 | dasd_schedule_device_bh(device); |
| 690 | } |
| 691 | list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| 692 | list_for_each_entry(device, &pavgroup->baselist, alias_list) { |
| 693 | dasd_schedule_block_bh(device->block); |
| 694 | dasd_schedule_device_bh(device); |
| 695 | } |
| 696 | } |
| 697 | } |
| 698 | |
| 699 | static void flush_all_alias_devices_on_lcu(struct alias_lcu *lcu) |
| 700 | { |
| 701 | struct alias_pav_group *pavgroup; |
| 702 | struct dasd_device *device, *temp; |
| 703 | struct dasd_eckd_private *private; |
| 704 | int rc; |
| 705 | unsigned long flags; |
| 706 | LIST_HEAD(active); |
| 707 | |
| 708 | /* |
| 709 | * Problem here ist that dasd_flush_device_queue may wait |
| 710 | * for termination of a request to complete. We can't keep |
| 711 | * the lcu lock during that time, so we must assume that |
| 712 | * the lists may have changed. |
| 713 | * Idea: first gather all active alias devices in a separate list, |
| 714 | * then flush the first element of this list unlocked, and afterwards |
| 715 | * check if it is still on the list before moving it to the |
| 716 | * active_devices list. |
| 717 | */ |
| 718 | |
| 719 | spin_lock_irqsave(&lcu->lock, flags); |
| 720 | list_for_each_entry_safe(device, temp, &lcu->active_devices, |
| 721 | alias_list) { |
| 722 | private = (struct dasd_eckd_private *) device->private; |
| 723 | if (private->uid.type == UA_BASE_DEVICE) |
| 724 | continue; |
| 725 | list_move(&device->alias_list, &active); |
| 726 | } |
| 727 | |
| 728 | list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| 729 | list_splice_init(&pavgroup->aliaslist, &active); |
| 730 | } |
| 731 | while (!list_empty(&active)) { |
| 732 | device = list_first_entry(&active, struct dasd_device, |
| 733 | alias_list); |
| 734 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 735 | rc = dasd_flush_device_queue(device); |
| 736 | spin_lock_irqsave(&lcu->lock, flags); |
| 737 | /* |
| 738 | * only move device around if it wasn't moved away while we |
| 739 | * were waiting for the flush |
| 740 | */ |
| 741 | if (device == list_first_entry(&active, |
| 742 | struct dasd_device, alias_list)) |
| 743 | list_move(&device->alias_list, &lcu->active_devices); |
| 744 | } |
| 745 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 746 | } |
| 747 | |
| 748 | /* |
| 749 | * This function is called in interrupt context, so the |
| 750 | * cdev lock for device is already locked! |
| 751 | */ |
| 752 | static void _stop_all_devices_on_lcu(struct alias_lcu *lcu, |
| 753 | struct dasd_device *device) |
| 754 | { |
| 755 | struct alias_pav_group *pavgroup; |
| 756 | struct dasd_device *pos; |
| 757 | |
| 758 | list_for_each_entry(pos, &lcu->active_devices, alias_list) { |
| 759 | if (pos != device) |
| 760 | spin_lock(get_ccwdev_lock(pos->cdev)); |
| 761 | pos->stopped |= DASD_STOPPED_SU; |
| 762 | if (pos != device) |
| 763 | spin_unlock(get_ccwdev_lock(pos->cdev)); |
| 764 | } |
| 765 | list_for_each_entry(pos, &lcu->inactive_devices, alias_list) { |
| 766 | if (pos != device) |
| 767 | spin_lock(get_ccwdev_lock(pos->cdev)); |
| 768 | pos->stopped |= DASD_STOPPED_SU; |
| 769 | if (pos != device) |
| 770 | spin_unlock(get_ccwdev_lock(pos->cdev)); |
| 771 | } |
| 772 | list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| 773 | list_for_each_entry(pos, &pavgroup->baselist, alias_list) { |
| 774 | if (pos != device) |
| 775 | spin_lock(get_ccwdev_lock(pos->cdev)); |
| 776 | pos->stopped |= DASD_STOPPED_SU; |
| 777 | if (pos != device) |
| 778 | spin_unlock(get_ccwdev_lock(pos->cdev)); |
| 779 | } |
| 780 | list_for_each_entry(pos, &pavgroup->aliaslist, alias_list) { |
| 781 | if (pos != device) |
| 782 | spin_lock(get_ccwdev_lock(pos->cdev)); |
| 783 | pos->stopped |= DASD_STOPPED_SU; |
| 784 | if (pos != device) |
| 785 | spin_unlock(get_ccwdev_lock(pos->cdev)); |
| 786 | } |
| 787 | } |
| 788 | } |
| 789 | |
| 790 | static void _unstop_all_devices_on_lcu(struct alias_lcu *lcu) |
| 791 | { |
| 792 | struct alias_pav_group *pavgroup; |
| 793 | struct dasd_device *device; |
| 794 | unsigned long flags; |
| 795 | |
| 796 | list_for_each_entry(device, &lcu->active_devices, alias_list) { |
| 797 | spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| 798 | device->stopped &= ~DASD_STOPPED_SU; |
| 799 | spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); |
| 800 | } |
| 801 | |
| 802 | list_for_each_entry(device, &lcu->inactive_devices, alias_list) { |
| 803 | spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| 804 | device->stopped &= ~DASD_STOPPED_SU; |
| 805 | spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); |
| 806 | } |
| 807 | |
| 808 | list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| 809 | list_for_each_entry(device, &pavgroup->baselist, alias_list) { |
| 810 | spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| 811 | device->stopped &= ~DASD_STOPPED_SU; |
| 812 | spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), |
| 813 | flags); |
| 814 | } |
| 815 | list_for_each_entry(device, &pavgroup->aliaslist, alias_list) { |
| 816 | spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| 817 | device->stopped &= ~DASD_STOPPED_SU; |
| 818 | spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), |
| 819 | flags); |
| 820 | } |
| 821 | } |
| 822 | } |
| 823 | |
| 824 | static void summary_unit_check_handling_work(struct work_struct *work) |
| 825 | { |
| 826 | struct alias_lcu *lcu; |
| 827 | struct summary_unit_check_work_data *suc_data; |
| 828 | unsigned long flags; |
| 829 | struct dasd_device *device; |
| 830 | |
| 831 | suc_data = container_of(work, struct summary_unit_check_work_data, |
| 832 | worker); |
| 833 | lcu = container_of(suc_data, struct alias_lcu, suc_data); |
| 834 | device = suc_data->device; |
| 835 | |
| 836 | /* 1. flush alias devices */ |
| 837 | flush_all_alias_devices_on_lcu(lcu); |
| 838 | |
| 839 | /* 2. reset summary unit check */ |
| 840 | spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| 841 | device->stopped &= ~(DASD_STOPPED_SU | DASD_STOPPED_PENDING); |
| 842 | spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); |
| 843 | reset_summary_unit_check(lcu, device, suc_data->reason); |
| 844 | |
| 845 | spin_lock_irqsave(&lcu->lock, flags); |
| 846 | _unstop_all_devices_on_lcu(lcu); |
| 847 | _restart_all_base_devices_on_lcu(lcu); |
| 848 | /* 3. read new alias configuration */ |
| 849 | _schedule_lcu_update(lcu, device); |
| 850 | lcu->suc_data.device = NULL; |
| 851 | spin_unlock_irqrestore(&lcu->lock, flags); |
| 852 | } |
| 853 | |
| 854 | /* |
| 855 | * note: this will be called from int handler context (cdev locked) |
| 856 | */ |
| 857 | void dasd_alias_handle_summary_unit_check(struct dasd_device *device, |
| 858 | struct irb *irb) |
| 859 | { |
| 860 | struct alias_lcu *lcu; |
| 861 | char reason; |
| 862 | struct dasd_eckd_private *private; |
| 863 | |
| 864 | private = (struct dasd_eckd_private *) device->private; |
| 865 | |
| 866 | reason = irb->ecw[8]; |
| 867 | DEV_MESSAGE(KERN_WARNING, device, "%s %x", |
| 868 | "eckd handle summary unit check: reason", reason); |
| 869 | |
| 870 | lcu = private->lcu; |
| 871 | if (!lcu) { |
| 872 | DEV_MESSAGE(KERN_WARNING, device, "%s", |
| 873 | "device not ready to handle summary" |
| 874 | " unit check (no lcu structure)"); |
| 875 | return; |
| 876 | } |
| 877 | spin_lock(&lcu->lock); |
| 878 | _stop_all_devices_on_lcu(lcu, device); |
| 879 | /* prepare for lcu_update */ |
| 880 | private->lcu->flags |= NEED_UAC_UPDATE | UPDATE_PENDING; |
| 881 | /* If this device is about to be removed just return and wait for |
| 882 | * the next interrupt on a different device |
| 883 | */ |
| 884 | if (list_empty(&device->alias_list)) { |
| 885 | DEV_MESSAGE(KERN_WARNING, device, "%s", |
| 886 | "device is in offline processing," |
| 887 | " don't do summary unit check handling"); |
| 888 | spin_unlock(&lcu->lock); |
| 889 | return; |
| 890 | } |
| 891 | if (lcu->suc_data.device) { |
| 892 | /* already scheduled or running */ |
| 893 | DEV_MESSAGE(KERN_WARNING, device, "%s", |
| 894 | "previous instance of summary unit check worker" |
| 895 | " still pending"); |
| 896 | spin_unlock(&lcu->lock); |
| 897 | return ; |
| 898 | } |
| 899 | lcu->suc_data.reason = reason; |
| 900 | lcu->suc_data.device = device; |
| 901 | spin_unlock(&lcu->lock); |
| 902 | schedule_work(&lcu->suc_data.worker); |
| 903 | }; |