Gitiles
Code Review Sign In
review.shift-gmbh.com / SHIFTPHONES / kernel / shift / mainline / 84fb225ad257442d879a1f57c79184e31fb17aea / . / arch / arm / boot / dts / imx27-eukrea-cpuimx27.dtsi
blob: e2242638ea0b12808e6caf25077ddbb193c532fe [file] [log] [blame]
Alexander Shiyand8cae882014-05-13 18:48:15 +0400[diff] [blame]1/*
2 * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13#include "imx27.dtsi"
14
15/ {
16 model = "Eukrea CPUIMX27";
17 compatible = "eukrea,cpuimx27", "fsl,imx27";
18
19 memory {
20 reg = <0xa0000000 0x04000000>;
21 };
22
23 clocks {
24 #address-cells = <1>;
25 #size-cells = <0>;
26 compatible = "simple-bus";
27
28 clk14745600: clock@0 {
29 #clock-cells = <0>;
30 compatible = "fixed-clock";
31 clock-frequency = <14745600>;
32 reg = <0>;
33 };
34 };
35};
36
37&fec {
38 pinctrl-names = "default";
39 pinctrl-0 = <&pinctrl_fec>;
40 status = "okay";
41};
42
43&i2c1 {
44 pinctrl-names = "default";
45 pinctrl-0 = <&pinctrl_i2c1>;
46 status = "okay";
47
48 pcf8563@51 {
49 compatible = "nxp,pcf8563";
50 reg = <0x51>;
51 };
52};
53
54&nfc {
55 pinctrl-names = "default";
56 pinctrl-0 = <&pinctrl_nfc>;
57 nand-bus-width = <8>;
58 nand-ecc-mode = "hw";
59 nand-on-flash-bbt;
60 status = "okay";
61};
62
63&owire {
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_owire>;
66 status = "okay";
67};
68
69&sdhci2 {
70 pinctrl-names = "default";
71 pinctrl-0 = <&pinctrl_sdhc2>;
72 bus-width = <4>;
73 non-removable;
74 status = "okay";
75};
76
77&uart4 {
78 pinctrl-names = "default";
79 pinctrl-0 = <&pinctrl_uart4>;
80 fsl,uart-has-rtscts;
81 status = "okay";
82};
83
84&usbh2 {
85 pinctrl-names = "default";
86 pinctrl-0 = <&pinctrl_usbh2>;
87 dr_mode = "host";
88 phy_type = "ulpi";
89 disable-over-current;
90 status = "okay";
91};
92
93&usbotg {
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_usbotg>;
96 dr_mode = "otg";
97 phy_type = "ulpi";
98 disable-over-current;
99 status = "okay";
100};
101
102&weim {
103 status = "okay";
104
105 nor: nor@0,0 {
106 #address-cells = <1>;
107 #size-cells = <1>;
108 compatible = "cfi-flash";
109 reg = <0 0x00000000 0x04000000>;
110 bank-width = <2>;
111 linux,mtd-name = "physmap-flash.0";
112 fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
113 };
114
115 uart8250@3,200000 {
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_uart8250_1>;
118 compatible = "ns8250";
119 clocks = <&clk14745600>;
120 fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
121 interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
122 reg = <3 0x200000 0x1000>;
123 reg-shift = <1>;
124 reg-io-width = <1>;
125 no-loopback-test;
126 };
127
128 uart8250@3,400000 {
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_uart8250_2>;
131 compatible = "ns8250";
132 clocks = <&clk14745600>;
133 fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
134 interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
135 reg = <3 0x400000 0x1000>;
136 reg-shift = <1>;
137 reg-io-width = <1>;
138 no-loopback-test;
139 };
140
141 uart8250@3,800000 {
142 pinctrl-names = "default";
143 pinctrl-0 = <&pinctrl_uart8250_3>;
144 compatible = "ns8250";
145 clocks = <&clk14745600>;
146 fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
147 interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
148 reg = <3 0x800000 0x1000>;
149 reg-shift = <1>;
150 reg-io-width = <1>;
151 no-loopback-test;
152 };
153
154 uart8250@3,1000000 {
155 pinctrl-names = "default";
156 pinctrl-0 = <&pinctrl_uart8250_4>;
157 compatible = "ns8250";
158 clocks = <&clk14745600>;
159 fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
160 interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
161 reg = <3 0x1000000 0x1000>;
162 reg-shift = <1>;
163 reg-io-width = <1>;
164 no-loopback-test;
165 };
166};
167
168&iomuxc {
169 imx27-eukrea-cpuimx27 {
170 pinctrl_fec: fecgrp {
171 fsl,pins = <
172 MX27_PAD_SD3_CMD__FEC_TXD0 0x0
173 MX27_PAD_SD3_CLK__FEC_TXD1 0x0
174 MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
175 MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
176 MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
177 MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
178 MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
179 MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
180 MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
181 MX27_PAD_ATA_DATA7__FEC_MDC 0x0
182 MX27_PAD_ATA_DATA8__FEC_CRS 0x0
183 MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
184 MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
185 MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
186 MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
187 MX27_PAD_ATA_DATA13__FEC_COL 0x0
188 MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
189 MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
190 >;
191 };
192
193 pinctrl_i2c1: i2c1grp {
194 fsl,pins = <
195 MX27_PAD_I2C_DATA__I2C_DATA 0x0
196 MX27_PAD_I2C_CLK__I2C_CLK 0x0
197 >;
198 };
199
200 pinctrl_nfc: nfcgrp {
201 fsl,pins = <
202 MX27_PAD_NFRB__NFRB 0x0
203 MX27_PAD_NFCLE__NFCLE 0x0
204 MX27_PAD_NFWP_B__NFWP_B 0x0
205 MX27_PAD_NFCE_B__NFCE_B 0x0
206 MX27_PAD_NFALE__NFALE 0x0
207 MX27_PAD_NFRE_B__NFRE_B 0x0
208 MX27_PAD_NFWE_B__NFWE_B 0x0
209 >;
210 };
211
212 pinctrl_owire: owiregrp {
213 fsl,pins = <
214 MX27_PAD_RTCK__OWIRE 0x0
215 >;
216 };
217
218 pinctrl_sdhc2: sdhc2grp {
219 fsl,pins = <
220 MX27_PAD_SD2_CLK__SD2_CLK 0x0
221 MX27_PAD_SD2_CMD__SD2_CMD 0x0
222 MX27_PAD_SD2_D0__SD2_D0 0x0
223 MX27_PAD_SD2_D1__SD2_D1 0x0
224 MX27_PAD_SD2_D2__SD2_D2 0x0
225 MX27_PAD_SD2_D3__SD2_D3 0x0
226 >;
227 };
228
229 pinctrl_uart4: uart4grp {
230 fsl,pins = <
231 MX27_PAD_USBH1_TXDM__UART4_TXD 0x0
232 MX27_PAD_USBH1_RXDP__UART4_RXD 0x0
233 MX27_PAD_USBH1_TXDP__UART4_CTS 0x0
234 MX27_PAD_USBH1_FS__UART4_RTS 0x0
235 >;
236 };
237
238 pinctrl_uart8250_1: uart82501grp {
239 fsl,pins = <
240 MX27_PAD_USB_PWR__GPIO2_23 0x0
241 >;
242 };
243
244 pinctrl_uart8250_2: uart82502grp {
245 fsl,pins = <
246 MX27_PAD_USBH1_SUSP__GPIO2_22 0x0
247 >;
248 };
249
250 pinctrl_uart8250_3: uart82503grp {
251 fsl,pins = <
252 MX27_PAD_USBH1_OE_B__GPIO2_27 0x0
253 >;
254 };
255
256 pinctrl_uart8250_4: uart82504grp {
257 fsl,pins = <
258 MX27_PAD_USBH1_RXDM__GPIO2_30 0x0
259 >;
260 };
261
262 pinctrl_usbh2: usbh2grp {
263 fsl,pins = <
264 MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
265 MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
266 MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
267 MX27_PAD_USBH2_STP__USBH2_STP 0x0
268 MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
269 MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
270 MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
271 MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
272 MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
273 MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
274 MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
275 MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
276 >;
277 };
278
279 pinctrl_usbotg: usbotggrp {
280 fsl,pins = <
281 MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
282 MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
283 MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
284 MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
285 MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
286 MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
287 MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
288 MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
289 MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
290 MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
291 MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
292 MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
293 >;
294 };
295 };
296};