Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 1 | /* |
| 2 | * lms501kf03 TFT LCD panel driver. |
| 3 | * |
| 4 | * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| 5 | * Author: Jingoo Han <jg1.han@samsung.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License as published by the |
| 9 | * Free Software Foundation; either version 2 of the License, or (at your |
| 10 | * option) any later version. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/backlight.h> |
| 14 | #include <linux/delay.h> |
| 15 | #include <linux/fb.h> |
| 16 | #include <linux/gpio.h> |
| 17 | #include <linux/lcd.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/spi/spi.h> |
| 20 | #include <linux/wait.h> |
| 21 | |
| 22 | #define COMMAND_ONLY 0x00 |
| 23 | #define DATA_ONLY 0x01 |
| 24 | |
| 25 | struct lms501kf03 { |
| 26 | struct device *dev; |
| 27 | struct spi_device *spi; |
| 28 | unsigned int power; |
| 29 | struct lcd_device *ld; |
| 30 | struct lcd_platform_data *lcd_pd; |
| 31 | }; |
| 32 | |
| 33 | static const unsigned char seq_password[] = { |
| 34 | 0xb9, 0xff, 0x83, 0x69, |
| 35 | }; |
| 36 | |
| 37 | static const unsigned char seq_power[] = { |
| 38 | 0xb1, 0x01, 0x00, 0x34, 0x06, 0x00, 0x14, 0x14, 0x20, 0x28, |
| 39 | 0x12, 0x12, 0x17, 0x0a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, |
| 40 | }; |
| 41 | |
| 42 | static const unsigned char seq_display[] = { |
| 43 | 0xb2, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, 0xff, 0x00, 0x00, |
| 44 | 0x00, 0x00, 0x03, 0x03, 0x00, 0x01, |
| 45 | }; |
| 46 | |
| 47 | static const unsigned char seq_rgb_if[] = { |
| 48 | 0xb3, 0x09, |
| 49 | }; |
| 50 | |
| 51 | static const unsigned char seq_display_inv[] = { |
| 52 | 0xb4, 0x01, 0x08, 0x77, 0x0e, 0x06, |
| 53 | }; |
| 54 | |
| 55 | static const unsigned char seq_vcom[] = { |
| 56 | 0xb6, 0x4c, 0x2e, |
| 57 | }; |
| 58 | |
| 59 | static const unsigned char seq_gate[] = { |
| 60 | 0xd5, 0x00, 0x05, 0x03, 0x29, 0x01, 0x07, 0x17, 0x68, 0x13, |
| 61 | 0x37, 0x20, 0x31, 0x8a, 0x46, 0x9b, 0x57, 0x13, 0x02, 0x75, |
| 62 | 0xb9, 0x64, 0xa8, 0x07, 0x0f, 0x04, 0x07, |
| 63 | }; |
| 64 | |
| 65 | static const unsigned char seq_panel[] = { |
| 66 | 0xcc, 0x02, |
| 67 | }; |
| 68 | |
| 69 | static const unsigned char seq_col_mod[] = { |
| 70 | 0x3a, 0x77, |
| 71 | }; |
| 72 | |
| 73 | static const unsigned char seq_w_gamma[] = { |
| 74 | 0xe0, 0x00, 0x04, 0x09, 0x0f, 0x1f, 0x3f, 0x1f, 0x2f, 0x0a, |
| 75 | 0x0f, 0x10, 0x16, 0x18, 0x16, 0x17, 0x0d, 0x15, 0x00, 0x04, |
| 76 | 0x09, 0x0f, 0x38, 0x3f, 0x20, 0x39, 0x0a, 0x0f, 0x10, 0x16, |
| 77 | 0x18, 0x16, 0x17, 0x0d, 0x15, |
| 78 | }; |
| 79 | |
| 80 | static const unsigned char seq_rgb_gamma[] = { |
| 81 | 0xc1, 0x01, 0x03, 0x07, 0x0f, 0x1a, 0x22, 0x2c, 0x33, 0x3c, |
| 82 | 0x46, 0x4f, 0x58, 0x60, 0x69, 0x71, 0x79, 0x82, 0x89, 0x92, |
| 83 | 0x9a, 0xa1, 0xa9, 0xb1, 0xb9, 0xc1, 0xc9, 0xcf, 0xd6, 0xde, |
| 84 | 0xe5, 0xec, 0xf3, 0xf9, 0xff, 0xdd, 0x39, 0x07, 0x1c, 0xcb, |
| 85 | 0xab, 0x5f, 0x49, 0x80, 0x03, 0x07, 0x0f, 0x19, 0x20, 0x2a, |
| 86 | 0x31, 0x39, 0x42, 0x4b, 0x53, 0x5b, 0x63, 0x6b, 0x73, 0x7b, |
| 87 | 0x83, 0x8a, 0x92, 0x9b, 0xa2, 0xaa, 0xb2, 0xba, 0xc2, 0xca, |
| 88 | 0xd0, 0xd8, 0xe1, 0xe8, 0xf0, 0xf8, 0xff, 0xf7, 0xd8, 0xbe, |
| 89 | 0xa7, 0x39, 0x40, 0x85, 0x8c, 0xc0, 0x04, 0x07, 0x0c, 0x17, |
| 90 | 0x1c, 0x23, 0x2b, 0x34, 0x3b, 0x43, 0x4c, 0x54, 0x5b, 0x63, |
| 91 | 0x6a, 0x73, 0x7a, 0x82, 0x8a, 0x91, 0x98, 0xa1, 0xa8, 0xb0, |
| 92 | 0xb7, 0xc1, 0xc9, 0xcf, 0xd9, 0xe3, 0xea, 0xf4, 0xff, 0x00, |
| 93 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 94 | }; |
| 95 | |
| 96 | static const unsigned char seq_up_dn[] = { |
| 97 | 0x36, 0x10, |
| 98 | }; |
| 99 | |
| 100 | static const unsigned char seq_sleep_in[] = { |
| 101 | 0x10, |
| 102 | }; |
| 103 | |
| 104 | static const unsigned char seq_sleep_out[] = { |
| 105 | 0x11, |
| 106 | }; |
| 107 | |
| 108 | static const unsigned char seq_display_on[] = { |
| 109 | 0x29, |
| 110 | }; |
| 111 | |
| 112 | static const unsigned char seq_display_off[] = { |
| 113 | 0x10, |
| 114 | }; |
| 115 | |
| 116 | static int lms501kf03_spi_write_byte(struct lms501kf03 *lcd, int addr, int data) |
| 117 | { |
| 118 | u16 buf[1]; |
| 119 | struct spi_message msg; |
| 120 | |
| 121 | struct spi_transfer xfer = { |
| 122 | .len = 2, |
| 123 | .tx_buf = buf, |
| 124 | }; |
| 125 | |
| 126 | buf[0] = (addr << 8) | data; |
| 127 | |
| 128 | spi_message_init(&msg); |
| 129 | spi_message_add_tail(&xfer, &msg); |
| 130 | |
| 131 | return spi_sync(lcd->spi, &msg); |
| 132 | } |
| 133 | |
| 134 | static int lms501kf03_spi_write(struct lms501kf03 *lcd, unsigned char address, |
| 135 | unsigned char command) |
| 136 | { |
| 137 | return lms501kf03_spi_write_byte(lcd, address, command); |
| 138 | } |
| 139 | |
| 140 | static int lms501kf03_panel_send_sequence(struct lms501kf03 *lcd, |
| 141 | const unsigned char *wbuf, |
| 142 | unsigned int len) |
| 143 | { |
| 144 | int ret = 0, i = 0; |
| 145 | |
| 146 | while (i < len) { |
| 147 | if (i == 0) |
| 148 | ret = lms501kf03_spi_write(lcd, COMMAND_ONLY, wbuf[i]); |
| 149 | else |
| 150 | ret = lms501kf03_spi_write(lcd, DATA_ONLY, wbuf[i]); |
| 151 | if (ret) |
| 152 | break; |
| 153 | i += 1; |
| 154 | } |
| 155 | |
| 156 | return ret; |
| 157 | } |
| 158 | |
| 159 | static int lms501kf03_ldi_init(struct lms501kf03 *lcd) |
| 160 | { |
| 161 | int ret, i; |
| 162 | static const unsigned char *init_seq[] = { |
| 163 | seq_password, |
| 164 | seq_power, |
| 165 | seq_display, |
| 166 | seq_rgb_if, |
| 167 | seq_display_inv, |
| 168 | seq_vcom, |
| 169 | seq_gate, |
| 170 | seq_panel, |
| 171 | seq_col_mod, |
| 172 | seq_w_gamma, |
| 173 | seq_rgb_gamma, |
| 174 | seq_sleep_out, |
| 175 | }; |
| 176 | |
| 177 | static const unsigned int size_seq[] = { |
| 178 | ARRAY_SIZE(seq_password), |
| 179 | ARRAY_SIZE(seq_power), |
| 180 | ARRAY_SIZE(seq_display), |
| 181 | ARRAY_SIZE(seq_rgb_if), |
| 182 | ARRAY_SIZE(seq_display_inv), |
| 183 | ARRAY_SIZE(seq_vcom), |
| 184 | ARRAY_SIZE(seq_gate), |
| 185 | ARRAY_SIZE(seq_panel), |
| 186 | ARRAY_SIZE(seq_col_mod), |
| 187 | ARRAY_SIZE(seq_w_gamma), |
| 188 | ARRAY_SIZE(seq_rgb_gamma), |
| 189 | ARRAY_SIZE(seq_sleep_out), |
| 190 | }; |
| 191 | |
| 192 | for (i = 0; i < ARRAY_SIZE(init_seq); i++) { |
| 193 | ret = lms501kf03_panel_send_sequence(lcd, init_seq[i], |
| 194 | size_seq[i]); |
| 195 | if (ret) |
| 196 | break; |
| 197 | } |
| 198 | /* |
| 199 | * According to the datasheet, 120ms delay time is required. |
| 200 | * After sleep out sequence, command is blocked for 120ms. |
| 201 | * Thus, LDI should wait for 120ms. |
| 202 | */ |
| 203 | msleep(120); |
| 204 | |
| 205 | return ret; |
| 206 | } |
| 207 | |
| 208 | static int lms501kf03_ldi_enable(struct lms501kf03 *lcd) |
| 209 | { |
| 210 | return lms501kf03_panel_send_sequence(lcd, seq_display_on, |
| 211 | ARRAY_SIZE(seq_display_on)); |
| 212 | } |
| 213 | |
| 214 | static int lms501kf03_ldi_disable(struct lms501kf03 *lcd) |
| 215 | { |
| 216 | return lms501kf03_panel_send_sequence(lcd, seq_display_off, |
| 217 | ARRAY_SIZE(seq_display_off)); |
| 218 | } |
| 219 | |
| 220 | static int lms501kf03_power_is_on(int power) |
| 221 | { |
| 222 | return (power) <= FB_BLANK_NORMAL; |
| 223 | } |
| 224 | |
| 225 | static int lms501kf03_power_on(struct lms501kf03 *lcd) |
| 226 | { |
| 227 | int ret = 0; |
| 228 | struct lcd_platform_data *pd; |
| 229 | |
| 230 | pd = lcd->lcd_pd; |
| 231 | |
| 232 | if (!pd->power_on) { |
| 233 | dev_err(lcd->dev, "power_on is NULL.\n"); |
| 234 | return -EINVAL; |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 235 | } |
| 236 | |
Jingoo Han | b50ffb8 | 2014-08-27 10:12:37 +0900 | [diff] [blame] | 237 | pd->power_on(lcd->ld, 1); |
| 238 | msleep(pd->power_on_delay); |
| 239 | |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 240 | if (!pd->reset) { |
| 241 | dev_err(lcd->dev, "reset is NULL.\n"); |
| 242 | return -EINVAL; |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 243 | } |
| 244 | |
Jingoo Han | b50ffb8 | 2014-08-27 10:12:37 +0900 | [diff] [blame] | 245 | pd->reset(lcd->ld); |
| 246 | msleep(pd->reset_delay); |
| 247 | |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 248 | ret = lms501kf03_ldi_init(lcd); |
| 249 | if (ret) { |
| 250 | dev_err(lcd->dev, "failed to initialize ldi.\n"); |
| 251 | return ret; |
| 252 | } |
| 253 | |
| 254 | ret = lms501kf03_ldi_enable(lcd); |
| 255 | if (ret) { |
| 256 | dev_err(lcd->dev, "failed to enable ldi.\n"); |
| 257 | return ret; |
| 258 | } |
| 259 | |
| 260 | return 0; |
| 261 | } |
| 262 | |
| 263 | static int lms501kf03_power_off(struct lms501kf03 *lcd) |
| 264 | { |
| 265 | int ret = 0; |
| 266 | struct lcd_platform_data *pd; |
| 267 | |
| 268 | pd = lcd->lcd_pd; |
| 269 | |
| 270 | ret = lms501kf03_ldi_disable(lcd); |
| 271 | if (ret) { |
| 272 | dev_err(lcd->dev, "lcd setting failed.\n"); |
| 273 | return -EIO; |
| 274 | } |
| 275 | |
| 276 | msleep(pd->power_off_delay); |
| 277 | |
| 278 | pd->power_on(lcd->ld, 0); |
| 279 | |
| 280 | return 0; |
| 281 | } |
| 282 | |
| 283 | static int lms501kf03_power(struct lms501kf03 *lcd, int power) |
| 284 | { |
| 285 | int ret = 0; |
| 286 | |
| 287 | if (lms501kf03_power_is_on(power) && |
| 288 | !lms501kf03_power_is_on(lcd->power)) |
| 289 | ret = lms501kf03_power_on(lcd); |
| 290 | else if (!lms501kf03_power_is_on(power) && |
| 291 | lms501kf03_power_is_on(lcd->power)) |
| 292 | ret = lms501kf03_power_off(lcd); |
| 293 | |
| 294 | if (!ret) |
| 295 | lcd->power = power; |
| 296 | |
| 297 | return ret; |
| 298 | } |
| 299 | |
| 300 | static int lms501kf03_get_power(struct lcd_device *ld) |
| 301 | { |
| 302 | struct lms501kf03 *lcd = lcd_get_data(ld); |
| 303 | |
| 304 | return lcd->power; |
| 305 | } |
| 306 | |
| 307 | static int lms501kf03_set_power(struct lcd_device *ld, int power) |
| 308 | { |
| 309 | struct lms501kf03 *lcd = lcd_get_data(ld); |
| 310 | |
| 311 | if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && |
| 312 | power != FB_BLANK_NORMAL) { |
| 313 | dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); |
| 314 | return -EINVAL; |
| 315 | } |
| 316 | |
| 317 | return lms501kf03_power(lcd, power); |
| 318 | } |
| 319 | |
| 320 | static struct lcd_ops lms501kf03_lcd_ops = { |
| 321 | .get_power = lms501kf03_get_power, |
| 322 | .set_power = lms501kf03_set_power, |
| 323 | }; |
| 324 | |
| 325 | static int lms501kf03_probe(struct spi_device *spi) |
| 326 | { |
| 327 | struct lms501kf03 *lcd = NULL; |
| 328 | struct lcd_device *ld = NULL; |
| 329 | int ret = 0; |
| 330 | |
| 331 | lcd = devm_kzalloc(&spi->dev, sizeof(struct lms501kf03), GFP_KERNEL); |
| 332 | if (!lcd) |
| 333 | return -ENOMEM; |
| 334 | |
| 335 | /* lms501kf03 lcd panel uses 3-wire 9-bit SPI Mode. */ |
| 336 | spi->bits_per_word = 9; |
| 337 | |
| 338 | ret = spi_setup(spi); |
| 339 | if (ret < 0) { |
| 340 | dev_err(&spi->dev, "spi setup failed.\n"); |
| 341 | return ret; |
| 342 | } |
| 343 | |
| 344 | lcd->spi = spi; |
| 345 | lcd->dev = &spi->dev; |
| 346 | |
Jingoo Han | c512794c | 2013-11-12 15:09:04 -0800 | [diff] [blame] | 347 | lcd->lcd_pd = dev_get_platdata(&spi->dev); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 348 | if (!lcd->lcd_pd) { |
| 349 | dev_err(&spi->dev, "platform data is NULL\n"); |
| 350 | return -EINVAL; |
| 351 | } |
| 352 | |
Jingoo Han | 8358741 | 2013-11-12 15:09:29 -0800 | [diff] [blame] | 353 | ld = devm_lcd_device_register(&spi->dev, "lms501kf03", &spi->dev, lcd, |
| 354 | &lms501kf03_lcd_ops); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 355 | if (IS_ERR(ld)) |
| 356 | return PTR_ERR(ld); |
| 357 | |
| 358 | lcd->ld = ld; |
| 359 | |
| 360 | if (!lcd->lcd_pd->lcd_enabled) { |
| 361 | /* |
| 362 | * if lcd panel was off from bootloader then |
| 363 | * current lcd status is powerdown and then |
| 364 | * it enables lcd panel. |
| 365 | */ |
| 366 | lcd->power = FB_BLANK_POWERDOWN; |
| 367 | |
| 368 | lms501kf03_power(lcd, FB_BLANK_UNBLANK); |
| 369 | } else { |
| 370 | lcd->power = FB_BLANK_UNBLANK; |
| 371 | } |
| 372 | |
Jingoo Han | 281ea16 | 2013-02-21 16:43:43 -0800 | [diff] [blame] | 373 | spi_set_drvdata(spi, lcd); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 374 | |
| 375 | dev_info(&spi->dev, "lms501kf03 panel driver has been probed.\n"); |
| 376 | |
| 377 | return 0; |
| 378 | } |
| 379 | |
| 380 | static int lms501kf03_remove(struct spi_device *spi) |
| 381 | { |
Jingoo Han | 281ea16 | 2013-02-21 16:43:43 -0800 | [diff] [blame] | 382 | struct lms501kf03 *lcd = spi_get_drvdata(spi); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 383 | |
| 384 | lms501kf03_power(lcd, FB_BLANK_POWERDOWN); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 385 | return 0; |
| 386 | } |
| 387 | |
Jingoo Han | 26cd2a4 | 2013-04-29 16:17:36 -0700 | [diff] [blame] | 388 | #ifdef CONFIG_PM_SLEEP |
| 389 | static int lms501kf03_suspend(struct device *dev) |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 390 | { |
Jingoo Han | 26cd2a4 | 2013-04-29 16:17:36 -0700 | [diff] [blame] | 391 | struct lms501kf03 *lcd = dev_get_drvdata(dev); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 392 | |
Jingoo Han | 26cd2a4 | 2013-04-29 16:17:36 -0700 | [diff] [blame] | 393 | dev_dbg(dev, "lcd->power = %d\n", lcd->power); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 394 | |
| 395 | /* |
| 396 | * when lcd panel is suspend, lcd panel becomes off |
| 397 | * regardless of status. |
| 398 | */ |
| 399 | return lms501kf03_power(lcd, FB_BLANK_POWERDOWN); |
| 400 | } |
| 401 | |
Jingoo Han | 26cd2a4 | 2013-04-29 16:17:36 -0700 | [diff] [blame] | 402 | static int lms501kf03_resume(struct device *dev) |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 403 | { |
Jingoo Han | 26cd2a4 | 2013-04-29 16:17:36 -0700 | [diff] [blame] | 404 | struct lms501kf03 *lcd = dev_get_drvdata(dev); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 405 | |
| 406 | lcd->power = FB_BLANK_POWERDOWN; |
| 407 | |
| 408 | return lms501kf03_power(lcd, FB_BLANK_UNBLANK); |
| 409 | } |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 410 | #endif |
| 411 | |
Jingoo Han | 26cd2a4 | 2013-04-29 16:17:36 -0700 | [diff] [blame] | 412 | static SIMPLE_DEV_PM_OPS(lms501kf03_pm_ops, lms501kf03_suspend, |
| 413 | lms501kf03_resume); |
| 414 | |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 415 | static void lms501kf03_shutdown(struct spi_device *spi) |
| 416 | { |
Jingoo Han | 281ea16 | 2013-02-21 16:43:43 -0800 | [diff] [blame] | 417 | struct lms501kf03 *lcd = spi_get_drvdata(spi); |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 418 | |
| 419 | lms501kf03_power(lcd, FB_BLANK_POWERDOWN); |
| 420 | } |
| 421 | |
| 422 | static struct spi_driver lms501kf03_driver = { |
| 423 | .driver = { |
| 424 | .name = "lms501kf03", |
Jingoo Han | 26cd2a4 | 2013-04-29 16:17:36 -0700 | [diff] [blame] | 425 | .pm = &lms501kf03_pm_ops, |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 426 | }, |
| 427 | .probe = lms501kf03_probe, |
| 428 | .remove = lms501kf03_remove, |
| 429 | .shutdown = lms501kf03_shutdown, |
Jingoo Han | 1be9ca2 | 2013-02-21 16:43:14 -0800 | [diff] [blame] | 430 | }; |
| 431 | |
| 432 | module_spi_driver(lms501kf03_driver); |
| 433 | |
| 434 | MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); |
| 435 | MODULE_DESCRIPTION("lms501kf03 LCD Driver"); |
| 436 | MODULE_LICENSE("GPL"); |