Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * Berkshire PCI-PC Watchdog Card Driver |
| 3 | * |
| 4 | * (c) Copyright 2003 Wim Van Sebroeck <wim@iguana.be>. |
| 5 | * |
| 6 | * Based on source code of the following authors: |
| 7 | * Ken Hollis <kenji@bitgate.com>, |
| 8 | * Lindsay Harris <lindsay@bluegum.com>, |
| 9 | * Alan Cox <alan@redhat.com>, |
| 10 | * Matt Domsch <Matt_Domsch@dell.com>, |
| 11 | * Rob Radez <rob@osinvestor.com> |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or |
| 14 | * modify it under the terms of the GNU General Public License |
| 15 | * as published by the Free Software Foundation; either version |
| 16 | * 2 of the License, or (at your option) any later version. |
| 17 | * |
| 18 | * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor |
| 19 | * provide warranty for any of this software. This material is |
| 20 | * provided "AS-IS" and at no charge. |
| 21 | */ |
| 22 | |
| 23 | /* |
| 24 | * A bells and whistles driver is available from http://www.pcwd.de/ |
| 25 | * More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/ |
| 26 | */ |
| 27 | |
| 28 | /* |
| 29 | * Includes, defines, variables, module parameters, ... |
| 30 | */ |
| 31 | |
| 32 | #include <linux/config.h> |
| 33 | #include <linux/module.h> |
| 34 | #include <linux/moduleparam.h> |
| 35 | #include <linux/types.h> |
| 36 | #include <linux/delay.h> |
| 37 | #include <linux/miscdevice.h> |
| 38 | #include <linux/watchdog.h> |
| 39 | #include <linux/notifier.h> |
| 40 | #include <linux/reboot.h> |
| 41 | #include <linux/init.h> |
| 42 | #include <linux/fs.h> |
| 43 | #include <linux/pci.h> |
| 44 | #include <linux/ioport.h> |
| 45 | #include <linux/spinlock.h> |
| 46 | |
| 47 | #include <asm/uaccess.h> |
| 48 | #include <asm/io.h> |
| 49 | |
| 50 | /* Module and version information */ |
| 51 | #define WATCHDOG_VERSION "1.01" |
| 52 | #define WATCHDOG_DATE "15 Mar 2005" |
| 53 | #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog" |
| 54 | #define WATCHDOG_NAME "pcwd_pci" |
| 55 | #define PFX WATCHDOG_NAME ": " |
| 56 | #define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION " (" WATCHDOG_DATE ")\n" |
| 57 | |
| 58 | /* Stuff for the PCI ID's */ |
| 59 | #ifndef PCI_VENDOR_ID_QUICKLOGIC |
| 60 | #define PCI_VENDOR_ID_QUICKLOGIC 0x11e3 |
| 61 | #endif |
| 62 | |
| 63 | #ifndef PCI_DEVICE_ID_WATCHDOG_PCIPCWD |
| 64 | #define PCI_DEVICE_ID_WATCHDOG_PCIPCWD 0x5030 |
| 65 | #endif |
| 66 | |
| 67 | /* |
| 68 | * These are the defines that describe the control status bits for the |
| 69 | * PCI-PC Watchdog card. |
| 70 | */ |
| 71 | #define WD_PCI_WTRP 0x01 /* Watchdog Trip status */ |
| 72 | #define WD_PCI_HRBT 0x02 /* Watchdog Heartbeat */ |
| 73 | #define WD_PCI_TTRP 0x04 /* Temperature Trip status */ |
| 74 | |
| 75 | /* according to documentation max. time to process a command for the pci |
| 76 | * watchdog card is 100 ms, so we give it 150 ms to do it's job */ |
| 77 | #define PCI_COMMAND_TIMEOUT 150 |
| 78 | |
| 79 | /* Watchdog's internal commands */ |
| 80 | #define CMD_GET_STATUS 0x04 |
| 81 | #define CMD_GET_FIRMWARE_VERSION 0x08 |
| 82 | #define CMD_READ_WATCHDOG_TIMEOUT 0x18 |
| 83 | #define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 |
| 84 | |
| 85 | /* We can only use 1 card due to the /dev/watchdog restriction */ |
| 86 | static int cards_found; |
| 87 | |
| 88 | /* internal variables */ |
| 89 | static int temp_panic; |
| 90 | static unsigned long is_active; |
| 91 | static char expect_release; |
| 92 | static struct { |
| 93 | int supports_temp; /* Wether or not the card has a temperature device */ |
| 94 | int boot_status; /* The card's boot status */ |
| 95 | unsigned long io_addr; /* The cards I/O address */ |
| 96 | spinlock_t io_lock; |
| 97 | struct pci_dev *pdev; |
| 98 | } pcipcwd_private; |
| 99 | |
| 100 | /* module parameters */ |
| 101 | #define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */ |
| 102 | static int heartbeat = WATCHDOG_HEARTBEAT; |
| 103 | module_param(heartbeat, int, 0); |
| 104 | MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); |
| 105 | |
| 106 | #ifdef CONFIG_WATCHDOG_NOWAYOUT |
| 107 | static int nowayout = 1; |
| 108 | #else |
| 109 | static int nowayout = 0; |
| 110 | #endif |
| 111 | |
| 112 | module_param(nowayout, int, 0); |
| 113 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); |
| 114 | |
| 115 | /* |
| 116 | * Internal functions |
| 117 | */ |
| 118 | |
| 119 | static int send_command(int cmd, int *msb, int *lsb) |
| 120 | { |
| 121 | int got_response, count; |
| 122 | |
| 123 | spin_lock(&pcipcwd_private.io_lock); |
| 124 | /* If a command requires data it should be written first. |
| 125 | * Data for commands with 8 bits of data should be written to port 4. |
| 126 | * Commands with 16 bits of data, should be written as LSB to port 4 |
| 127 | * and MSB to port 5. |
| 128 | * After the required data has been written then write the command to |
| 129 | * port 6. */ |
| 130 | outb_p(*lsb, pcipcwd_private.io_addr + 4); |
| 131 | outb_p(*msb, pcipcwd_private.io_addr + 5); |
| 132 | outb_p(cmd, pcipcwd_private.io_addr + 6); |
| 133 | |
| 134 | /* wait till the pci card processed the command, signaled by |
| 135 | * the WRSP bit in port 2 and give it a max. timeout of |
| 136 | * PCI_COMMAND_TIMEOUT to process */ |
| 137 | got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40; |
| 138 | for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response); count++) { |
| 139 | mdelay(1); |
| 140 | got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40; |
| 141 | } |
| 142 | |
| 143 | if (got_response) { |
| 144 | /* read back response */ |
| 145 | *lsb = inb_p(pcipcwd_private.io_addr + 4); |
| 146 | *msb = inb_p(pcipcwd_private.io_addr + 5); |
| 147 | |
| 148 | /* clear WRSP bit */ |
| 149 | inb_p(pcipcwd_private.io_addr + 6); |
| 150 | } |
| 151 | spin_unlock(&pcipcwd_private.io_lock); |
| 152 | |
| 153 | return got_response; |
| 154 | } |
| 155 | |
| 156 | static int pcipcwd_start(void) |
| 157 | { |
| 158 | int stat_reg; |
| 159 | |
| 160 | spin_lock(&pcipcwd_private.io_lock); |
| 161 | outb_p(0x00, pcipcwd_private.io_addr + 3); |
| 162 | udelay(1000); |
| 163 | |
| 164 | stat_reg = inb_p(pcipcwd_private.io_addr + 2); |
| 165 | spin_unlock(&pcipcwd_private.io_lock); |
| 166 | |
| 167 | if (stat_reg & 0x10) { |
| 168 | printk(KERN_ERR PFX "Card timer not enabled\n"); |
| 169 | return -1; |
| 170 | } |
| 171 | |
| 172 | return 0; |
| 173 | } |
| 174 | |
| 175 | static int pcipcwd_stop(void) |
| 176 | { |
| 177 | int stat_reg; |
| 178 | |
| 179 | spin_lock(&pcipcwd_private.io_lock); |
| 180 | outb_p(0xA5, pcipcwd_private.io_addr + 3); |
| 181 | udelay(1000); |
| 182 | |
| 183 | outb_p(0xA5, pcipcwd_private.io_addr + 3); |
| 184 | udelay(1000); |
| 185 | |
| 186 | stat_reg = inb_p(pcipcwd_private.io_addr + 2); |
| 187 | spin_unlock(&pcipcwd_private.io_lock); |
| 188 | |
| 189 | if (!(stat_reg & 0x10)) { |
| 190 | printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n"); |
| 191 | return -1; |
| 192 | } |
| 193 | |
| 194 | return 0; |
| 195 | } |
| 196 | |
| 197 | static int pcipcwd_keepalive(void) |
| 198 | { |
| 199 | /* Re-trigger watchdog by writing to port 0 */ |
| 200 | outb_p(0x42, pcipcwd_private.io_addr); |
| 201 | return 0; |
| 202 | } |
| 203 | |
| 204 | static int pcipcwd_set_heartbeat(int t) |
| 205 | { |
| 206 | int t_msb = t / 256; |
| 207 | int t_lsb = t % 256; |
| 208 | |
| 209 | if ((t < 0x0001) || (t > 0xFFFF)) |
| 210 | return -EINVAL; |
| 211 | |
| 212 | /* Write new heartbeat to watchdog */ |
| 213 | send_command(CMD_WRITE_WATCHDOG_TIMEOUT, &t_msb, &t_lsb); |
| 214 | |
| 215 | heartbeat = t; |
| 216 | return 0; |
| 217 | } |
| 218 | |
| 219 | static int pcipcwd_get_status(int *status) |
| 220 | { |
| 221 | int new_status; |
| 222 | |
| 223 | *status=0; |
| 224 | new_status = inb_p(pcipcwd_private.io_addr + 1); |
| 225 | if (new_status & WD_PCI_WTRP) |
| 226 | *status |= WDIOF_CARDRESET; |
| 227 | if (new_status & WD_PCI_TTRP) { |
| 228 | *status |= WDIOF_OVERHEAT; |
| 229 | if (temp_panic) |
| 230 | panic(PFX "Temperature overheat trip!\n"); |
| 231 | } |
| 232 | |
| 233 | return 0; |
| 234 | } |
| 235 | |
| 236 | static int pcipcwd_clear_status(void) |
| 237 | { |
| 238 | outb_p(0x01, pcipcwd_private.io_addr + 1); |
| 239 | return 0; |
| 240 | } |
| 241 | |
| 242 | static int pcipcwd_get_temperature(int *temperature) |
| 243 | { |
| 244 | *temperature = 0; |
| 245 | if (!pcipcwd_private.supports_temp) |
| 246 | return -ENODEV; |
| 247 | |
| 248 | /* |
| 249 | * Convert celsius to fahrenheit, since this was |
| 250 | * the decided 'standard' for this return value. |
| 251 | */ |
| 252 | *temperature = ((inb_p(pcipcwd_private.io_addr)) * 9 / 5) + 32; |
| 253 | |
| 254 | return 0; |
| 255 | } |
| 256 | |
| 257 | /* |
| 258 | * /dev/watchdog handling |
| 259 | */ |
| 260 | |
| 261 | static ssize_t pcipcwd_write(struct file *file, const char __user *data, |
| 262 | size_t len, loff_t *ppos) |
| 263 | { |
| 264 | /* See if we got the magic character 'V' and reload the timer */ |
| 265 | if (len) { |
| 266 | if (!nowayout) { |
| 267 | size_t i; |
| 268 | |
| 269 | /* note: just in case someone wrote the magic character |
| 270 | * five months ago... */ |
| 271 | expect_release = 0; |
| 272 | |
| 273 | /* scan to see whether or not we got the magic character */ |
| 274 | for (i = 0; i != len; i++) { |
| 275 | char c; |
| 276 | if(get_user(c, data+i)) |
| 277 | return -EFAULT; |
| 278 | if (c == 'V') |
| 279 | expect_release = 42; |
| 280 | } |
| 281 | } |
| 282 | |
| 283 | /* someone wrote to us, we should reload the timer */ |
| 284 | pcipcwd_keepalive(); |
| 285 | } |
| 286 | return len; |
| 287 | } |
| 288 | |
| 289 | static int pcipcwd_ioctl(struct inode *inode, struct file *file, |
| 290 | unsigned int cmd, unsigned long arg) |
| 291 | { |
| 292 | void __user *argp = (void __user *)arg; |
| 293 | int __user *p = argp; |
| 294 | static struct watchdog_info ident = { |
| 295 | .options = WDIOF_OVERHEAT | |
| 296 | WDIOF_CARDRESET | |
| 297 | WDIOF_KEEPALIVEPING | |
| 298 | WDIOF_SETTIMEOUT | |
| 299 | WDIOF_MAGICCLOSE, |
| 300 | .firmware_version = 1, |
| 301 | .identity = WATCHDOG_DRIVER_NAME, |
| 302 | }; |
| 303 | |
| 304 | switch (cmd) { |
| 305 | case WDIOC_GETSUPPORT: |
| 306 | return copy_to_user(argp, &ident, |
| 307 | sizeof (ident)) ? -EFAULT : 0; |
| 308 | |
| 309 | case WDIOC_GETSTATUS: |
| 310 | { |
| 311 | int status; |
| 312 | |
| 313 | pcipcwd_get_status(&status); |
| 314 | |
| 315 | return put_user(status, p); |
| 316 | } |
| 317 | |
| 318 | case WDIOC_GETBOOTSTATUS: |
| 319 | return put_user(pcipcwd_private.boot_status, p); |
| 320 | |
| 321 | case WDIOC_GETTEMP: |
| 322 | { |
| 323 | int temperature; |
| 324 | |
| 325 | if (pcipcwd_get_temperature(&temperature)) |
| 326 | return -EFAULT; |
| 327 | |
| 328 | return put_user(temperature, p); |
| 329 | } |
| 330 | |
| 331 | case WDIOC_KEEPALIVE: |
| 332 | pcipcwd_keepalive(); |
| 333 | return 0; |
| 334 | |
| 335 | case WDIOC_SETOPTIONS: |
| 336 | { |
| 337 | int new_options, retval = -EINVAL; |
| 338 | |
| 339 | if (get_user (new_options, p)) |
| 340 | return -EFAULT; |
| 341 | |
| 342 | if (new_options & WDIOS_DISABLECARD) { |
| 343 | pcipcwd_stop(); |
| 344 | retval = 0; |
| 345 | } |
| 346 | |
| 347 | if (new_options & WDIOS_ENABLECARD) { |
| 348 | pcipcwd_start(); |
| 349 | retval = 0; |
| 350 | } |
| 351 | |
| 352 | if (new_options & WDIOS_TEMPPANIC) { |
| 353 | temp_panic = 1; |
| 354 | retval = 0; |
| 355 | } |
| 356 | |
| 357 | return retval; |
| 358 | } |
| 359 | |
| 360 | case WDIOC_SETTIMEOUT: |
| 361 | { |
| 362 | int new_heartbeat; |
| 363 | |
| 364 | if (get_user(new_heartbeat, p)) |
| 365 | return -EFAULT; |
| 366 | |
| 367 | if (pcipcwd_set_heartbeat(new_heartbeat)) |
| 368 | return -EINVAL; |
| 369 | |
| 370 | pcipcwd_keepalive(); |
| 371 | /* Fall */ |
| 372 | } |
| 373 | |
| 374 | case WDIOC_GETTIMEOUT: |
| 375 | return put_user(heartbeat, p); |
| 376 | |
| 377 | default: |
| 378 | return -ENOIOCTLCMD; |
| 379 | } |
| 380 | } |
| 381 | |
| 382 | static int pcipcwd_open(struct inode *inode, struct file *file) |
| 383 | { |
| 384 | /* /dev/watchdog can only be opened once */ |
| 385 | if (test_and_set_bit(0, &is_active)) |
| 386 | return -EBUSY; |
| 387 | |
| 388 | /* Activate */ |
| 389 | pcipcwd_start(); |
| 390 | pcipcwd_keepalive(); |
| 391 | return nonseekable_open(inode, file); |
| 392 | } |
| 393 | |
| 394 | static int pcipcwd_release(struct inode *inode, struct file *file) |
| 395 | { |
| 396 | /* |
| 397 | * Shut off the timer. |
| 398 | */ |
| 399 | if (expect_release == 42) { |
| 400 | pcipcwd_stop(); |
| 401 | } else { |
| 402 | printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); |
| 403 | pcipcwd_keepalive(); |
| 404 | } |
| 405 | expect_release = 0; |
| 406 | clear_bit(0, &is_active); |
| 407 | return 0; |
| 408 | } |
| 409 | |
| 410 | /* |
| 411 | * /dev/temperature handling |
| 412 | */ |
| 413 | |
| 414 | static ssize_t pcipcwd_temp_read(struct file *file, char __user *data, |
| 415 | size_t len, loff_t *ppos) |
| 416 | { |
| 417 | int temperature; |
| 418 | |
| 419 | if (pcipcwd_get_temperature(&temperature)) |
| 420 | return -EFAULT; |
| 421 | |
| 422 | if (copy_to_user (data, &temperature, 1)) |
| 423 | return -EFAULT; |
| 424 | |
| 425 | return 1; |
| 426 | } |
| 427 | |
| 428 | static int pcipcwd_temp_open(struct inode *inode, struct file *file) |
| 429 | { |
| 430 | if (!pcipcwd_private.supports_temp) |
| 431 | return -ENODEV; |
| 432 | |
| 433 | return nonseekable_open(inode, file); |
| 434 | } |
| 435 | |
| 436 | static int pcipcwd_temp_release(struct inode *inode, struct file *file) |
| 437 | { |
| 438 | return 0; |
| 439 | } |
| 440 | |
| 441 | /* |
| 442 | * Notify system |
| 443 | */ |
| 444 | |
| 445 | static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused) |
| 446 | { |
| 447 | if (code==SYS_DOWN || code==SYS_HALT) { |
| 448 | /* Turn the WDT off */ |
| 449 | pcipcwd_stop(); |
| 450 | } |
| 451 | |
| 452 | return NOTIFY_DONE; |
| 453 | } |
| 454 | |
| 455 | /* |
| 456 | * Kernel Interfaces |
| 457 | */ |
| 458 | |
| 459 | static struct file_operations pcipcwd_fops = { |
| 460 | .owner = THIS_MODULE, |
| 461 | .llseek = no_llseek, |
| 462 | .write = pcipcwd_write, |
| 463 | .ioctl = pcipcwd_ioctl, |
| 464 | .open = pcipcwd_open, |
| 465 | .release = pcipcwd_release, |
| 466 | }; |
| 467 | |
| 468 | static struct miscdevice pcipcwd_miscdev = { |
| 469 | .minor = WATCHDOG_MINOR, |
| 470 | .name = "watchdog", |
| 471 | .fops = &pcipcwd_fops, |
| 472 | }; |
| 473 | |
| 474 | static struct file_operations pcipcwd_temp_fops = { |
| 475 | .owner = THIS_MODULE, |
| 476 | .llseek = no_llseek, |
| 477 | .read = pcipcwd_temp_read, |
| 478 | .open = pcipcwd_temp_open, |
| 479 | .release = pcipcwd_temp_release, |
| 480 | }; |
| 481 | |
| 482 | static struct miscdevice pcipcwd_temp_miscdev = { |
| 483 | .minor = TEMP_MINOR, |
| 484 | .name = "temperature", |
| 485 | .fops = &pcipcwd_temp_fops, |
| 486 | }; |
| 487 | |
| 488 | static struct notifier_block pcipcwd_notifier = { |
| 489 | .notifier_call = pcipcwd_notify_sys, |
| 490 | }; |
| 491 | |
| 492 | /* |
| 493 | * Init & exit routines |
| 494 | */ |
| 495 | |
| 496 | static inline void check_temperature_support(void) |
| 497 | { |
| 498 | if (inb_p(pcipcwd_private.io_addr) != 0xF0) |
| 499 | pcipcwd_private.supports_temp = 1; |
| 500 | } |
| 501 | |
| 502 | static int __devinit pcipcwd_card_init(struct pci_dev *pdev, |
| 503 | const struct pci_device_id *ent) |
| 504 | { |
| 505 | int ret = -EIO; |
| 506 | int got_fw_rev, fw_rev_major, fw_rev_minor; |
| 507 | char fw_ver_str[20]; |
| 508 | char option_switches; |
| 509 | |
| 510 | cards_found++; |
| 511 | if (cards_found == 1) |
| 512 | printk(KERN_INFO PFX DRIVER_VERSION); |
| 513 | |
| 514 | if (cards_found > 1) { |
| 515 | printk(KERN_ERR PFX "This driver only supports 1 device\n"); |
| 516 | return -ENODEV; |
| 517 | } |
| 518 | |
| 519 | if (pci_enable_device(pdev)) { |
| 520 | printk(KERN_ERR PFX "Not possible to enable PCI Device\n"); |
| 521 | return -ENODEV; |
| 522 | } |
| 523 | |
| 524 | if (pci_resource_start(pdev, 0) == 0x0000) { |
| 525 | printk(KERN_ERR PFX "No I/O-Address for card detected\n"); |
| 526 | ret = -ENODEV; |
| 527 | goto err_out_disable_device; |
| 528 | } |
| 529 | |
| 530 | pcipcwd_private.pdev = pdev; |
| 531 | pcipcwd_private.io_addr = pci_resource_start(pdev, 0); |
| 532 | |
| 533 | if (pci_request_regions(pdev, WATCHDOG_NAME)) { |
| 534 | printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", |
| 535 | (int) pcipcwd_private.io_addr); |
| 536 | ret = -EIO; |
| 537 | goto err_out_disable_device; |
| 538 | } |
| 539 | |
| 540 | /* get the boot_status */ |
| 541 | pcipcwd_get_status(&pcipcwd_private.boot_status); |
| 542 | |
| 543 | /* clear the "card caused reboot" flag */ |
| 544 | pcipcwd_clear_status(); |
| 545 | |
| 546 | /* disable card */ |
| 547 | pcipcwd_stop(); |
| 548 | |
| 549 | /* Check whether or not the card supports the temperature device */ |
| 550 | check_temperature_support(); |
| 551 | |
| 552 | /* Get the Firmware Version */ |
| 553 | got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); |
| 554 | if (got_fw_rev) { |
| 555 | sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); |
| 556 | } else { |
| 557 | sprintf(fw_ver_str, "<card no answer>"); |
| 558 | } |
| 559 | |
| 560 | /* Get switch settings */ |
| 561 | option_switches = inb_p(pcipcwd_private.io_addr + 3); |
| 562 | |
| 563 | printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n", |
| 564 | (int) pcipcwd_private.io_addr, fw_ver_str, |
| 565 | (pcipcwd_private.supports_temp ? "with" : "without")); |
| 566 | |
| 567 | printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n", |
| 568 | option_switches, |
| 569 | ((option_switches & 0x10) ? "ON" : "OFF"), |
| 570 | ((option_switches & 0x08) ? "ON" : "OFF")); |
| 571 | |
| 572 | if (pcipcwd_private.boot_status & WDIOF_CARDRESET) |
| 573 | printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n"); |
| 574 | |
| 575 | if (pcipcwd_private.boot_status & WDIOF_OVERHEAT) |
| 576 | printk(KERN_INFO PFX "Card sensed a CPU Overheat\n"); |
| 577 | |
| 578 | if (pcipcwd_private.boot_status == 0) |
| 579 | printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n"); |
| 580 | |
| 581 | /* Check that the heartbeat value is within it's range ; if not reset to the default */ |
| 582 | if (pcipcwd_set_heartbeat(heartbeat)) { |
| 583 | pcipcwd_set_heartbeat(WATCHDOG_HEARTBEAT); |
| 584 | printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n", |
| 585 | WATCHDOG_HEARTBEAT); |
| 586 | } |
| 587 | |
| 588 | ret = register_reboot_notifier(&pcipcwd_notifier); |
| 589 | if (ret != 0) { |
| 590 | printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", |
| 591 | ret); |
| 592 | goto err_out_release_region; |
| 593 | } |
| 594 | |
| 595 | if (pcipcwd_private.supports_temp) { |
| 596 | ret = misc_register(&pcipcwd_temp_miscdev); |
| 597 | if (ret != 0) { |
| 598 | printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", |
| 599 | TEMP_MINOR, ret); |
| 600 | goto err_out_unregister_reboot; |
| 601 | } |
| 602 | } |
| 603 | |
| 604 | ret = misc_register(&pcipcwd_miscdev); |
| 605 | if (ret != 0) { |
| 606 | printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", |
| 607 | WATCHDOG_MINOR, ret); |
| 608 | goto err_out_misc_deregister; |
| 609 | } |
| 610 | |
| 611 | printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", |
| 612 | heartbeat, nowayout); |
| 613 | |
| 614 | return 0; |
| 615 | |
| 616 | err_out_misc_deregister: |
| 617 | if (pcipcwd_private.supports_temp) |
| 618 | misc_deregister(&pcipcwd_temp_miscdev); |
| 619 | err_out_unregister_reboot: |
| 620 | unregister_reboot_notifier(&pcipcwd_notifier); |
| 621 | err_out_release_region: |
| 622 | pci_release_regions(pdev); |
| 623 | err_out_disable_device: |
| 624 | pci_disable_device(pdev); |
| 625 | return ret; |
| 626 | } |
| 627 | |
| 628 | static void __devexit pcipcwd_card_exit(struct pci_dev *pdev) |
| 629 | { |
| 630 | /* Stop the timer before we leave */ |
| 631 | if (!nowayout) |
| 632 | pcipcwd_stop(); |
| 633 | |
| 634 | /* Deregister */ |
| 635 | misc_deregister(&pcipcwd_miscdev); |
| 636 | if (pcipcwd_private.supports_temp) |
| 637 | misc_deregister(&pcipcwd_temp_miscdev); |
| 638 | unregister_reboot_notifier(&pcipcwd_notifier); |
| 639 | pci_release_regions(pdev); |
| 640 | pci_disable_device(pdev); |
| 641 | cards_found--; |
| 642 | } |
| 643 | |
| 644 | static struct pci_device_id pcipcwd_pci_tbl[] = { |
| 645 | { PCI_VENDOR_ID_QUICKLOGIC, PCI_DEVICE_ID_WATCHDOG_PCIPCWD, |
| 646 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 647 | { 0 }, /* End of list */ |
| 648 | }; |
| 649 | MODULE_DEVICE_TABLE(pci, pcipcwd_pci_tbl); |
| 650 | |
| 651 | static struct pci_driver pcipcwd_driver = { |
| 652 | .name = WATCHDOG_NAME, |
| 653 | .id_table = pcipcwd_pci_tbl, |
| 654 | .probe = pcipcwd_card_init, |
| 655 | .remove = __devexit_p(pcipcwd_card_exit), |
| 656 | }; |
| 657 | |
| 658 | static int __init pcipcwd_init_module(void) |
| 659 | { |
| 660 | spin_lock_init (&pcipcwd_private.io_lock); |
| 661 | |
| 662 | return pci_register_driver(&pcipcwd_driver); |
| 663 | } |
| 664 | |
| 665 | static void __exit pcipcwd_cleanup_module(void) |
| 666 | { |
| 667 | pci_unregister_driver(&pcipcwd_driver); |
| 668 | } |
| 669 | |
| 670 | module_init(pcipcwd_init_module); |
| 671 | module_exit(pcipcwd_cleanup_module); |
| 672 | |
| 673 | MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); |
| 674 | MODULE_DESCRIPTION("Berkshire PCI-PC Watchdog driver"); |
| 675 | MODULE_LICENSE("GPL"); |
| 676 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |
| 677 | MODULE_ALIAS_MISCDEV(TEMP_MINOR); |