| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * |
| * Copyright (c) 2011, Microsoft Corporation. |
| * |
| * Authors: |
| * Haiyang Zhang <haiyangz@microsoft.com> |
| * Hank Janssen <hjanssen@microsoft.com> |
| * K. Y. Srinivasan <kys@microsoft.com> |
| */ |
| |
| #ifndef _HYPERV_H |
| #define _HYPERV_H |
| |
| #include <uapi/linux/hyperv.h> |
| |
| #include <linux/mm.h> |
| #include <linux/types.h> |
| #include <linux/scatterlist.h> |
| #include <linux/list.h> |
| #include <linux/timer.h> |
| #include <linux/completion.h> |
| #include <linux/device.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/interrupt.h> |
| #include <linux/reciprocal_div.h> |
| #include <asm/hyperv-tlfs.h> |
| |
| #define MAX_PAGE_BUFFER_COUNT 32 |
| #define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */ |
| |
| #pragma pack(push, 1) |
| |
| /* |
| * Types for GPADL, decides is how GPADL header is created. |
| * |
| * It doesn't make much difference between BUFFER and RING if PAGE_SIZE is the |
| * same as HV_HYP_PAGE_SIZE. |
| * |
| * If PAGE_SIZE is bigger than HV_HYP_PAGE_SIZE, the headers of ring buffers |
| * will be of PAGE_SIZE, however, only the first HV_HYP_PAGE will be put |
| * into gpadl, therefore the number for HV_HYP_PAGE and the indexes of each |
| * HV_HYP_PAGE will be different between different types of GPADL, for example |
| * if PAGE_SIZE is 64K: |
| * |
| * BUFFER: |
| * |
| * gva: |-- 64k --|-- 64k --| ... | |
| * gpa: | 4k | 4k | ... | 4k | 4k | 4k | ... | 4k | |
| * index: 0 1 2 15 16 17 18 .. 31 32 ... |
| * | | ... | | | ... | ... |
| * v V V V V V |
| * gpadl: | 4k | 4k | ... | 4k | 4k | 4k | ... | 4k | ... | |
| * index: 0 1 2 ... 15 16 17 18 .. 31 32 ... |
| * |
| * RING: |
| * |
| * | header | data | header | data | |
| * gva: |-- 64k --|-- 64k --| ... |-- 64k --|-- 64k --| ... | |
| * gpa: | 4k | .. | 4k | 4k | ... | 4k | ... | 4k | .. | 4k | .. | ... | |
| * index: 0 1 16 17 18 31 ... n n+1 n+16 ... 2n |
| * | / / / | / / |
| * | / / / | / / |
| * | / / ... / ... | / ... / |
| * | / / / | / / |
| * | / / / | / / |
| * V V V V V V v |
| * gpadl: | 4k | 4k | ... | ... | 4k | 4k | ... | |
| * index: 0 1 2 ... 16 ... n-15 n-14 n-13 ... 2n-30 |
| */ |
| enum hv_gpadl_type { |
| HV_GPADL_BUFFER, |
| HV_GPADL_RING |
| }; |
| |
| /* Single-page buffer */ |
| struct hv_page_buffer { |
| u32 len; |
| u32 offset; |
| u64 pfn; |
| }; |
| |
| /* Multiple-page buffer */ |
| struct hv_multipage_buffer { |
| /* Length and Offset determines the # of pfns in the array */ |
| u32 len; |
| u32 offset; |
| u64 pfn_array[MAX_MULTIPAGE_BUFFER_COUNT]; |
| }; |
| |
| /* |
| * Multiple-page buffer array; the pfn array is variable size: |
| * The number of entries in the PFN array is determined by |
| * "len" and "offset". |
| */ |
| struct hv_mpb_array { |
| /* Length and Offset determines the # of pfns in the array */ |
| u32 len; |
| u32 offset; |
| u64 pfn_array[]; |
| }; |
| |
| /* 0x18 includes the proprietary packet header */ |
| #define MAX_PAGE_BUFFER_PACKET (0x18 + \ |
| (sizeof(struct hv_page_buffer) * \ |
| MAX_PAGE_BUFFER_COUNT)) |
| #define MAX_MULTIPAGE_BUFFER_PACKET (0x18 + \ |
| sizeof(struct hv_multipage_buffer)) |
| |
| |
| #pragma pack(pop) |
| |
| struct hv_ring_buffer { |
| /* Offset in bytes from the start of ring data below */ |
| u32 write_index; |
| |
| /* Offset in bytes from the start of ring data below */ |
| u32 read_index; |
| |
| u32 interrupt_mask; |
| |
| /* |
| * WS2012/Win8 and later versions of Hyper-V implement interrupt |
| * driven flow management. The feature bit feat_pending_send_sz |
| * is set by the host on the host->guest ring buffer, and by the |
| * guest on the guest->host ring buffer. |
| * |
| * The meaning of the feature bit is a bit complex in that it has |
| * semantics that apply to both ring buffers. If the guest sets |
| * the feature bit in the guest->host ring buffer, the guest is |
| * telling the host that: |
| * 1) It will set the pending_send_sz field in the guest->host ring |
| * buffer when it is waiting for space to become available, and |
| * 2) It will read the pending_send_sz field in the host->guest |
| * ring buffer and interrupt the host when it frees enough space |
| * |
| * Similarly, if the host sets the feature bit in the host->guest |
| * ring buffer, the host is telling the guest that: |
| * 1) It will set the pending_send_sz field in the host->guest ring |
| * buffer when it is waiting for space to become available, and |
| * 2) It will read the pending_send_sz field in the guest->host |
| * ring buffer and interrupt the guest when it frees enough space |
| * |
| * If either the guest or host does not set the feature bit that it |
| * owns, that guest or host must do polling if it encounters a full |
| * ring buffer, and not signal the other end with an interrupt. |
| */ |
| u32 pending_send_sz; |
| u32 reserved1[12]; |
| union { |
| struct { |
| u32 feat_pending_send_sz:1; |
| }; |
| u32 value; |
| } feature_bits; |
| |
| /* Pad it to PAGE_SIZE so that data starts on page boundary */ |
| u8 reserved2[PAGE_SIZE - 68]; |
| |
| /* |
| * Ring data starts here + RingDataStartOffset |
| * !!! DO NOT place any fields below this !!! |
| */ |
| u8 buffer[]; |
| } __packed; |
| |
| /* Calculate the proper size of a ringbuffer, it must be page-aligned */ |
| #define VMBUS_RING_SIZE(payload_sz) PAGE_ALIGN(sizeof(struct hv_ring_buffer) + \ |
| (payload_sz)) |
| |
| struct hv_ring_buffer_info { |
| struct hv_ring_buffer *ring_buffer; |
| u32 ring_size; /* Include the shared header */ |
| struct reciprocal_value ring_size_div10_reciprocal; |
| spinlock_t ring_lock; |
| |
| u32 ring_datasize; /* < ring_size */ |
| u32 priv_read_index; |
| /* |
| * The ring buffer mutex lock. This lock prevents the ring buffer from |
| * being freed while the ring buffer is being accessed. |
| */ |
| struct mutex ring_buffer_mutex; |
| }; |
| |
| |
| static inline u32 hv_get_bytes_to_read(const struct hv_ring_buffer_info *rbi) |
| { |
| u32 read_loc, write_loc, dsize, read; |
| |
| dsize = rbi->ring_datasize; |
| read_loc = rbi->ring_buffer->read_index; |
| write_loc = READ_ONCE(rbi->ring_buffer->write_index); |
| |
| read = write_loc >= read_loc ? (write_loc - read_loc) : |
| (dsize - read_loc) + write_loc; |
| |
| return read; |
| } |
| |
| static inline u32 hv_get_bytes_to_write(const struct hv_ring_buffer_info *rbi) |
| { |
| u32 read_loc, write_loc, dsize, write; |
| |
| dsize = rbi->ring_datasize; |
| read_loc = READ_ONCE(rbi->ring_buffer->read_index); |
| write_loc = rbi->ring_buffer->write_index; |
| |
| write = write_loc >= read_loc ? dsize - (write_loc - read_loc) : |
| read_loc - write_loc; |
| return write; |
| } |
| |
| static inline u32 hv_get_avail_to_write_percent( |
| const struct hv_ring_buffer_info *rbi) |
| { |
| u32 avail_write = hv_get_bytes_to_write(rbi); |
| |
| return reciprocal_divide( |
| (avail_write << 3) + (avail_write << 1), |
| rbi->ring_size_div10_reciprocal); |
| } |
| |
| /* |
| * VMBUS version is 32 bit entity broken up into |
| * two 16 bit quantities: major_number. minor_number. |
| * |
| * 0 . 13 (Windows Server 2008) |
| * 1 . 1 (Windows 7) |
| * 2 . 4 (Windows 8) |
| * 3 . 0 (Windows 8 R2) |
| * 4 . 0 (Windows 10) |
| * 4 . 1 (Windows 10 RS3) |
| * 5 . 0 (Newer Windows 10) |
| * 5 . 1 (Windows 10 RS4) |
| * 5 . 2 (Windows Server 2019, RS5) |
| */ |
| |
| #define VERSION_WS2008 ((0 << 16) | (13)) |
| #define VERSION_WIN7 ((1 << 16) | (1)) |
| #define VERSION_WIN8 ((2 << 16) | (4)) |
| #define VERSION_WIN8_1 ((3 << 16) | (0)) |
| #define VERSION_WIN10 ((4 << 16) | (0)) |
| #define VERSION_WIN10_V4_1 ((4 << 16) | (1)) |
| #define VERSION_WIN10_V5 ((5 << 16) | (0)) |
| #define VERSION_WIN10_V5_1 ((5 << 16) | (1)) |
| #define VERSION_WIN10_V5_2 ((5 << 16) | (2)) |
| |
| /* Make maximum size of pipe payload of 16K */ |
| #define MAX_PIPE_DATA_PAYLOAD (sizeof(u8) * 16384) |
| |
| /* Define PipeMode values. */ |
| #define VMBUS_PIPE_TYPE_BYTE 0x00000000 |
| #define VMBUS_PIPE_TYPE_MESSAGE 0x00000004 |
| |
| /* The size of the user defined data buffer for non-pipe offers. */ |
| #define MAX_USER_DEFINED_BYTES 120 |
| |
| /* The size of the user defined data buffer for pipe offers. */ |
| #define MAX_PIPE_USER_DEFINED_BYTES 116 |
| |
| /* |
| * At the center of the Channel Management library is the Channel Offer. This |
| * struct contains the fundamental information about an offer. |
| */ |
| struct vmbus_channel_offer { |
| guid_t if_type; |
| guid_t if_instance; |
| |
| /* |
| * These two fields are not currently used. |
| */ |
| u64 reserved1; |
| u64 reserved2; |
| |
| u16 chn_flags; |
| u16 mmio_megabytes; /* in bytes * 1024 * 1024 */ |
| |
| union { |
| /* Non-pipes: The user has MAX_USER_DEFINED_BYTES bytes. */ |
| struct { |
| unsigned char user_def[MAX_USER_DEFINED_BYTES]; |
| } std; |
| |
| /* |
| * Pipes: |
| * The following sructure is an integrated pipe protocol, which |
| * is implemented on top of standard user-defined data. Pipe |
| * clients have MAX_PIPE_USER_DEFINED_BYTES left for their own |
| * use. |
| */ |
| struct { |
| u32 pipe_mode; |
| unsigned char user_def[MAX_PIPE_USER_DEFINED_BYTES]; |
| } pipe; |
| } u; |
| /* |
| * The sub_channel_index is defined in Win8: a value of zero means a |
| * primary channel and a value of non-zero means a sub-channel. |
| * |
| * Before Win8, the field is reserved, meaning it's always zero. |
| */ |
| u16 sub_channel_index; |
| u16 reserved3; |
| } __packed; |
| |
| /* Server Flags */ |
| #define VMBUS_CHANNEL_ENUMERATE_DEVICE_INTERFACE 1 |
| #define VMBUS_CHANNEL_SERVER_SUPPORTS_TRANSFER_PAGES 2 |
| #define VMBUS_CHANNEL_SERVER_SUPPORTS_GPADLS 4 |
| #define VMBUS_CHANNEL_NAMED_PIPE_MODE 0x10 |
| #define VMBUS_CHANNEL_LOOPBACK_OFFER 0x100 |
| #define VMBUS_CHANNEL_PARENT_OFFER 0x200 |
| #define VMBUS_CHANNEL_REQUEST_MONITORED_NOTIFICATION 0x400 |
| #define VMBUS_CHANNEL_TLNPI_PROVIDER_OFFER 0x2000 |
| |
| struct vmpacket_descriptor { |
| u16 type; |
| u16 offset8; |
| u16 len8; |
| u16 flags; |
| u64 trans_id; |
| } __packed; |
| |
| struct vmpacket_header { |
| u32 prev_pkt_start_offset; |
| struct vmpacket_descriptor descriptor; |
| } __packed; |
| |
| struct vmtransfer_page_range { |
| u32 byte_count; |
| u32 byte_offset; |
| } __packed; |
| |
| struct vmtransfer_page_packet_header { |
| struct vmpacket_descriptor d; |
| u16 xfer_pageset_id; |
| u8 sender_owns_set; |
| u8 reserved; |
| u32 range_cnt; |
| struct vmtransfer_page_range ranges[1]; |
| } __packed; |
| |
| struct vmgpadl_packet_header { |
| struct vmpacket_descriptor d; |
| u32 gpadl; |
| u32 reserved; |
| } __packed; |
| |
| struct vmadd_remove_transfer_page_set { |
| struct vmpacket_descriptor d; |
| u32 gpadl; |
| u16 xfer_pageset_id; |
| u16 reserved; |
| } __packed; |
| |
| /* |
| * This structure defines a range in guest physical space that can be made to |
| * look virtually contiguous. |
| */ |
| struct gpa_range { |
| u32 byte_count; |
| u32 byte_offset; |
| u64 pfn_array[]; |
| }; |
| |
| /* |
| * This is the format for an Establish Gpadl packet, which contains a handle by |
| * which this GPADL will be known and a set of GPA ranges associated with it. |
| * This can be converted to a MDL by the guest OS. If there are multiple GPA |
| * ranges, then the resulting MDL will be "chained," representing multiple VA |
| * ranges. |
| */ |
| struct vmestablish_gpadl { |
| struct vmpacket_descriptor d; |
| u32 gpadl; |
| u32 range_cnt; |
| struct gpa_range range[1]; |
| } __packed; |
| |
| /* |
| * This is the format for a Teardown Gpadl packet, which indicates that the |
| * GPADL handle in the Establish Gpadl packet will never be referenced again. |
| */ |
| struct vmteardown_gpadl { |
| struct vmpacket_descriptor d; |
| u32 gpadl; |
| u32 reserved; /* for alignment to a 8-byte boundary */ |
| } __packed; |
| |
| /* |
| * This is the format for a GPA-Direct packet, which contains a set of GPA |
| * ranges, in addition to commands and/or data. |
| */ |
| struct vmdata_gpa_direct { |
| struct vmpacket_descriptor d; |
| u32 reserved; |
| u32 range_cnt; |
| struct gpa_range range[1]; |
| } __packed; |
| |
| /* This is the format for a Additional Data Packet. */ |
| struct vmadditional_data { |
| struct vmpacket_descriptor d; |
| u64 total_bytes; |
| u32 offset; |
| u32 byte_cnt; |
| unsigned char data[1]; |
| } __packed; |
| |
| union vmpacket_largest_possible_header { |
| struct vmpacket_descriptor simple_hdr; |
| struct vmtransfer_page_packet_header xfer_page_hdr; |
| struct vmgpadl_packet_header gpadl_hdr; |
| struct vmadd_remove_transfer_page_set add_rm_xfer_page_hdr; |
| struct vmestablish_gpadl establish_gpadl_hdr; |
| struct vmteardown_gpadl teardown_gpadl_hdr; |
| struct vmdata_gpa_direct data_gpa_direct_hdr; |
| }; |
| |
| #define VMPACKET_DATA_START_ADDRESS(__packet) \ |
| (void *)(((unsigned char *)__packet) + \ |
| ((struct vmpacket_descriptor)__packet)->offset8 * 8) |
| |
| #define VMPACKET_DATA_LENGTH(__packet) \ |
| ((((struct vmpacket_descriptor)__packet)->len8 - \ |
| ((struct vmpacket_descriptor)__packet)->offset8) * 8) |
| |
| #define VMPACKET_TRANSFER_MODE(__packet) \ |
| (((struct IMPACT)__packet)->type) |
| |
| enum vmbus_packet_type { |
| VM_PKT_INVALID = 0x0, |
| VM_PKT_SYNCH = 0x1, |
| VM_PKT_ADD_XFER_PAGESET = 0x2, |
| VM_PKT_RM_XFER_PAGESET = 0x3, |
| VM_PKT_ESTABLISH_GPADL = 0x4, |
| VM_PKT_TEARDOWN_GPADL = 0x5, |
| VM_PKT_DATA_INBAND = 0x6, |
| VM_PKT_DATA_USING_XFER_PAGES = 0x7, |
| VM_PKT_DATA_USING_GPADL = 0x8, |
| VM_PKT_DATA_USING_GPA_DIRECT = 0x9, |
| VM_PKT_CANCEL_REQUEST = 0xa, |
| VM_PKT_COMP = 0xb, |
| VM_PKT_DATA_USING_ADDITIONAL_PKT = 0xc, |
| VM_PKT_ADDITIONAL_DATA = 0xd |
| }; |
| |
| #define VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED 1 |
| |
| |
| /* Version 1 messages */ |
| enum vmbus_channel_message_type { |
| CHANNELMSG_INVALID = 0, |
| CHANNELMSG_OFFERCHANNEL = 1, |
| CHANNELMSG_RESCIND_CHANNELOFFER = 2, |
| CHANNELMSG_REQUESTOFFERS = 3, |
| CHANNELMSG_ALLOFFERS_DELIVERED = 4, |
| CHANNELMSG_OPENCHANNEL = 5, |
| CHANNELMSG_OPENCHANNEL_RESULT = 6, |
| CHANNELMSG_CLOSECHANNEL = 7, |
| CHANNELMSG_GPADL_HEADER = 8, |
| CHANNELMSG_GPADL_BODY = 9, |
| CHANNELMSG_GPADL_CREATED = 10, |
| CHANNELMSG_GPADL_TEARDOWN = 11, |
| CHANNELMSG_GPADL_TORNDOWN = 12, |
| CHANNELMSG_RELID_RELEASED = 13, |
| CHANNELMSG_INITIATE_CONTACT = 14, |
| CHANNELMSG_VERSION_RESPONSE = 15, |
| CHANNELMSG_UNLOAD = 16, |
| CHANNELMSG_UNLOAD_RESPONSE = 17, |
| CHANNELMSG_18 = 18, |
| CHANNELMSG_19 = 19, |
| CHANNELMSG_20 = 20, |
| CHANNELMSG_TL_CONNECT_REQUEST = 21, |
| CHANNELMSG_MODIFYCHANNEL = 22, |
| CHANNELMSG_TL_CONNECT_RESULT = 23, |
| CHANNELMSG_COUNT |
| }; |
| |
| /* Hyper-V supports about 2048 channels, and the RELIDs start with 1. */ |
| #define INVALID_RELID U32_MAX |
| |
| struct vmbus_channel_message_header { |
| enum vmbus_channel_message_type msgtype; |
| u32 padding; |
| } __packed; |
| |
| /* Query VMBus Version parameters */ |
| struct vmbus_channel_query_vmbus_version { |
| struct vmbus_channel_message_header header; |
| u32 version; |
| } __packed; |
| |
| /* VMBus Version Supported parameters */ |
| struct vmbus_channel_version_supported { |
| struct vmbus_channel_message_header header; |
| u8 version_supported; |
| } __packed; |
| |
| /* Offer Channel parameters */ |
| struct vmbus_channel_offer_channel { |
| struct vmbus_channel_message_header header; |
| struct vmbus_channel_offer offer; |
| u32 child_relid; |
| u8 monitorid; |
| /* |
| * win7 and beyond splits this field into a bit field. |
| */ |
| u8 monitor_allocated:1; |
| u8 reserved:7; |
| /* |
| * These are new fields added in win7 and later. |
| * Do not access these fields without checking the |
| * negotiated protocol. |
| * |
| * If "is_dedicated_interrupt" is set, we must not set the |
| * associated bit in the channel bitmap while sending the |
| * interrupt to the host. |
| * |
| * connection_id is to be used in signaling the host. |
| */ |
| u16 is_dedicated_interrupt:1; |
| u16 reserved1:15; |
| u32 connection_id; |
| } __packed; |
| |
| /* Rescind Offer parameters */ |
| struct vmbus_channel_rescind_offer { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| } __packed; |
| |
| static inline u32 |
| hv_ringbuffer_pending_size(const struct hv_ring_buffer_info *rbi) |
| { |
| return rbi->ring_buffer->pending_send_sz; |
| } |
| |
| /* |
| * Request Offer -- no parameters, SynIC message contains the partition ID |
| * Set Snoop -- no parameters, SynIC message contains the partition ID |
| * Clear Snoop -- no parameters, SynIC message contains the partition ID |
| * All Offers Delivered -- no parameters, SynIC message contains the partition |
| * ID |
| * Flush Client -- no parameters, SynIC message contains the partition ID |
| */ |
| |
| /* Open Channel parameters */ |
| struct vmbus_channel_open_channel { |
| struct vmbus_channel_message_header header; |
| |
| /* Identifies the specific VMBus channel that is being opened. */ |
| u32 child_relid; |
| |
| /* ID making a particular open request at a channel offer unique. */ |
| u32 openid; |
| |
| /* GPADL for the channel's ring buffer. */ |
| u32 ringbuffer_gpadlhandle; |
| |
| /* |
| * Starting with win8, this field will be used to specify |
| * the target virtual processor on which to deliver the interrupt for |
| * the host to guest communication. |
| * Prior to win8, incoming channel interrupts would only |
| * be delivered on cpu 0. Setting this value to 0 would |
| * preserve the earlier behavior. |
| */ |
| u32 target_vp; |
| |
| /* |
| * The upstream ring buffer begins at offset zero in the memory |
| * described by RingBufferGpadlHandle. The downstream ring buffer |
| * follows it at this offset (in pages). |
| */ |
| u32 downstream_ringbuffer_pageoffset; |
| |
| /* User-specific data to be passed along to the server endpoint. */ |
| unsigned char userdata[MAX_USER_DEFINED_BYTES]; |
| } __packed; |
| |
| /* Open Channel Result parameters */ |
| struct vmbus_channel_open_result { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| u32 openid; |
| u32 status; |
| } __packed; |
| |
| /* Close channel parameters; */ |
| struct vmbus_channel_close_channel { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| } __packed; |
| |
| /* Channel Message GPADL */ |
| #define GPADL_TYPE_RING_BUFFER 1 |
| #define GPADL_TYPE_SERVER_SAVE_AREA 2 |
| #define GPADL_TYPE_TRANSACTION 8 |
| |
| /* |
| * The number of PFNs in a GPADL message is defined by the number of |
| * pages that would be spanned by ByteCount and ByteOffset. If the |
| * implied number of PFNs won't fit in this packet, there will be a |
| * follow-up packet that contains more. |
| */ |
| struct vmbus_channel_gpadl_header { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| u32 gpadl; |
| u16 range_buflen; |
| u16 rangecount; |
| struct gpa_range range[]; |
| } __packed; |
| |
| /* This is the followup packet that contains more PFNs. */ |
| struct vmbus_channel_gpadl_body { |
| struct vmbus_channel_message_header header; |
| u32 msgnumber; |
| u32 gpadl; |
| u64 pfn[]; |
| } __packed; |
| |
| struct vmbus_channel_gpadl_created { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| u32 gpadl; |
| u32 creation_status; |
| } __packed; |
| |
| struct vmbus_channel_gpadl_teardown { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| u32 gpadl; |
| } __packed; |
| |
| struct vmbus_channel_gpadl_torndown { |
| struct vmbus_channel_message_header header; |
| u32 gpadl; |
| } __packed; |
| |
| struct vmbus_channel_relid_released { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| } __packed; |
| |
| struct vmbus_channel_initiate_contact { |
| struct vmbus_channel_message_header header; |
| u32 vmbus_version_requested; |
| u32 target_vcpu; /* The VCPU the host should respond to */ |
| union { |
| u64 interrupt_page; |
| struct { |
| u8 msg_sint; |
| u8 padding1[3]; |
| u32 padding2; |
| }; |
| }; |
| u64 monitor_page1; |
| u64 monitor_page2; |
| } __packed; |
| |
| /* Hyper-V socket: guest's connect()-ing to host */ |
| struct vmbus_channel_tl_connect_request { |
| struct vmbus_channel_message_header header; |
| guid_t guest_endpoint_id; |
| guid_t host_service_id; |
| } __packed; |
| |
| /* Modify Channel parameters, cf. vmbus_send_modifychannel() */ |
| struct vmbus_channel_modifychannel { |
| struct vmbus_channel_message_header header; |
| u32 child_relid; |
| u32 target_vp; |
| } __packed; |
| |
| struct vmbus_channel_version_response { |
| struct vmbus_channel_message_header header; |
| u8 version_supported; |
| |
| u8 connection_state; |
| u16 padding; |
| |
| /* |
| * On new hosts that support VMBus protocol 5.0, we must use |
| * VMBUS_MESSAGE_CONNECTION_ID_4 for the Initiate Contact Message, |
| * and for subsequent messages, we must use the Message Connection ID |
| * field in the host-returned Version Response Message. |
| * |
| * On old hosts, we should always use VMBUS_MESSAGE_CONNECTION_ID (1). |
| */ |
| u32 msg_conn_id; |
| } __packed; |
| |
| enum vmbus_channel_state { |
| CHANNEL_OFFER_STATE, |
| CHANNEL_OPENING_STATE, |
| CHANNEL_OPEN_STATE, |
| CHANNEL_OPENED_STATE, |
| }; |
| |
| /* |
| * Represents each channel msg on the vmbus connection This is a |
| * variable-size data structure depending on the msg type itself |
| */ |
| struct vmbus_channel_msginfo { |
| /* Bookkeeping stuff */ |
| struct list_head msglistentry; |
| |
| /* So far, this is only used to handle gpadl body message */ |
| struct list_head submsglist; |
| |
| /* Synchronize the request/response if needed */ |
| struct completion waitevent; |
| struct vmbus_channel *waiting_channel; |
| union { |
| struct vmbus_channel_version_supported version_supported; |
| struct vmbus_channel_open_result open_result; |
| struct vmbus_channel_gpadl_torndown gpadl_torndown; |
| struct vmbus_channel_gpadl_created gpadl_created; |
| struct vmbus_channel_version_response version_response; |
| } response; |
| |
| u32 msgsize; |
| /* |
| * The channel message that goes out on the "wire". |
| * It will contain at minimum the VMBUS_CHANNEL_MESSAGE_HEADER header |
| */ |
| unsigned char msg[]; |
| }; |
| |
| struct vmbus_close_msg { |
| struct vmbus_channel_msginfo info; |
| struct vmbus_channel_close_channel msg; |
| }; |
| |
| /* Define connection identifier type. */ |
| union hv_connection_id { |
| u32 asu32; |
| struct { |
| u32 id:24; |
| u32 reserved:8; |
| } u; |
| }; |
| |
| enum vmbus_device_type { |
| HV_IDE = 0, |
| HV_SCSI, |
| HV_FC, |
| HV_NIC, |
| HV_ND, |
| HV_PCIE, |
| HV_FB, |
| HV_KBD, |
| HV_MOUSE, |
| HV_KVP, |
| HV_TS, |
| HV_HB, |
| HV_SHUTDOWN, |
| HV_FCOPY, |
| HV_BACKUP, |
| HV_DM, |
| HV_UNKNOWN, |
| }; |
| |
| struct vmbus_device { |
| u16 dev_type; |
| guid_t guid; |
| bool perf_device; |
| }; |
| |
| struct vmbus_channel { |
| struct list_head listentry; |
| |
| struct hv_device *device_obj; |
| |
| enum vmbus_channel_state state; |
| |
| struct vmbus_channel_offer_channel offermsg; |
| /* |
| * These are based on the OfferMsg.MonitorId. |
| * Save it here for easy access. |
| */ |
| u8 monitor_grp; |
| u8 monitor_bit; |
| |
| bool rescind; /* got rescind msg */ |
| struct completion rescind_event; |
| |
| u32 ringbuffer_gpadlhandle; |
| |
| /* Allocated memory for ring buffer */ |
| struct page *ringbuffer_page; |
| u32 ringbuffer_pagecount; |
| u32 ringbuffer_send_offset; |
| struct hv_ring_buffer_info outbound; /* send to parent */ |
| struct hv_ring_buffer_info inbound; /* receive from parent */ |
| |
| struct vmbus_close_msg close_msg; |
| |
| /* Statistics */ |
| u64 interrupts; /* Host to Guest interrupts */ |
| u64 sig_events; /* Guest to Host events */ |
| |
| /* |
| * Guest to host interrupts caused by the outbound ring buffer changing |
| * from empty to not empty. |
| */ |
| u64 intr_out_empty; |
| |
| /* |
| * Indicates that a full outbound ring buffer was encountered. The flag |
| * is set to true when a full outbound ring buffer is encountered and |
| * set to false when a write to the outbound ring buffer is completed. |
| */ |
| bool out_full_flag; |
| |
| /* Channel callback's invoked in softirq context */ |
| struct tasklet_struct callback_event; |
| void (*onchannel_callback)(void *context); |
| void *channel_callback_context; |
| |
| void (*change_target_cpu_callback)(struct vmbus_channel *channel, |
| u32 old, u32 new); |
| |
| /* |
| * Synchronize channel scheduling and channel removal; see the inline |
| * comments in vmbus_chan_sched() and vmbus_reset_channel_cb(). |
| */ |
| spinlock_t sched_lock; |
| |
| /* |
| * A channel can be marked for one of three modes of reading: |
| * BATCHED - callback called from taslket and should read |
| * channel until empty. Interrupts from the host |
| * are masked while read is in process (default). |
| * DIRECT - callback called from tasklet (softirq). |
| * ISR - callback called in interrupt context and must |
| * invoke its own deferred processing. |
| * Host interrupts are disabled and must be re-enabled |
| * when ring is empty. |
| */ |
| enum hv_callback_mode { |
| HV_CALL_BATCHED, |
| HV_CALL_DIRECT, |
| HV_CALL_ISR |
| } callback_mode; |
| |
| bool is_dedicated_interrupt; |
| u64 sig_event; |
| |
| /* |
| * Starting with win8, this field will be used to specify the |
| * target CPU on which to deliver the interrupt for the host |
| * to guest communication. |
| * |
| * Prior to win8, incoming channel interrupts would only be |
| * delivered on CPU 0. Setting this value to 0 would preserve |
| * the earlier behavior. |
| */ |
| u32 target_cpu; |
| /* |
| * Support for sub-channels. For high performance devices, |
| * it will be useful to have multiple sub-channels to support |
| * a scalable communication infrastructure with the host. |
| * The support for sub-channels is implemented as an extention |
| * to the current infrastructure. |
| * The initial offer is considered the primary channel and this |
| * offer message will indicate if the host supports sub-channels. |
| * The guest is free to ask for sub-channels to be offerred and can |
| * open these sub-channels as a normal "primary" channel. However, |
| * all sub-channels will have the same type and instance guids as the |
| * primary channel. Requests sent on a given channel will result in a |
| * response on the same channel. |
| */ |
| |
| /* |
| * Sub-channel creation callback. This callback will be called in |
| * process context when a sub-channel offer is received from the host. |
| * The guest can open the sub-channel in the context of this callback. |
| */ |
| void (*sc_creation_callback)(struct vmbus_channel *new_sc); |
| |
| /* |
| * Channel rescind callback. Some channels (the hvsock ones), need to |
| * register a callback which is invoked in vmbus_onoffer_rescind(). |
| */ |
| void (*chn_rescind_callback)(struct vmbus_channel *channel); |
| |
| /* |
| * All Sub-channels of a primary channel are linked here. |
| */ |
| struct list_head sc_list; |
| /* |
| * The primary channel this sub-channel belongs to. |
| * This will be NULL for the primary channel. |
| */ |
| struct vmbus_channel *primary_channel; |
| /* |
| * Support per-channel state for use by vmbus drivers. |
| */ |
| void *per_channel_state; |
| |
| /* |
| * Defer freeing channel until after all cpu's have |
| * gone through grace period. |
| */ |
| struct rcu_head rcu; |
| |
| /* |
| * For sysfs per-channel properties. |
| */ |
| struct kobject kobj; |
| |
| /* |
| * For performance critical channels (storage, networking |
| * etc,), Hyper-V has a mechanism to enhance the throughput |
| * at the expense of latency: |
| * When the host is to be signaled, we just set a bit in a shared page |
| * and this bit will be inspected by the hypervisor within a certain |
| * window and if the bit is set, the host will be signaled. The window |
| * of time is the monitor latency - currently around 100 usecs. This |
| * mechanism improves throughput by: |
| * |
| * A) Making the host more efficient - each time it wakes up, |
| * potentially it will process morev number of packets. The |
| * monitor latency allows a batch to build up. |
| * B) By deferring the hypercall to signal, we will also minimize |
| * the interrupts. |
| * |
| * Clearly, these optimizations improve throughput at the expense of |
| * latency. Furthermore, since the channel is shared for both |
| * control and data messages, control messages currently suffer |
| * unnecessary latency adversley impacting performance and boot |
| * time. To fix this issue, permit tagging the channel as being |
| * in "low latency" mode. In this mode, we will bypass the monitor |
| * mechanism. |
| */ |
| bool low_latency; |
| |
| bool probe_done; |
| |
| /* |
| * Cache the device ID here for easy access; this is useful, in |
| * particular, in situations where the channel's device_obj has |
| * not been allocated/initialized yet. |
| */ |
| u16 device_id; |
| |
| /* |
| * We must offload the handling of the primary/sub channels |
| * from the single-threaded vmbus_connection.work_queue to |
| * two different workqueue, otherwise we can block |
| * vmbus_connection.work_queue and hang: see vmbus_process_offer(). |
| */ |
| struct work_struct add_channel_work; |
| |
| /* |
| * Guest to host interrupts caused by the inbound ring buffer changing |
| * from full to not full while a packet is waiting. |
| */ |
| u64 intr_in_full; |
| |
| /* |
| * The total number of write operations that encountered a full |
| * outbound ring buffer. |
| */ |
| u64 out_full_total; |
| |
| /* |
| * The number of write operations that were the first to encounter a |
| * full outbound ring buffer. |
| */ |
| u64 out_full_first; |
| |
| /* enabling/disabling fuzz testing on the channel (default is false)*/ |
| bool fuzz_testing_state; |
| |
| /* |
| * Interrupt delay will delay the guest from emptying the ring buffer |
| * for a specific amount of time. The delay is in microseconds and will |
| * be between 1 to a maximum of 1000, its default is 0 (no delay). |
| * The Message delay will delay guest reading on a per message basis |
| * in microseconds between 1 to 1000 with the default being 0 |
| * (no delay). |
| */ |
| u32 fuzz_testing_interrupt_delay; |
| u32 fuzz_testing_message_delay; |
| |
| }; |
| |
| static inline bool is_hvsock_channel(const struct vmbus_channel *c) |
| { |
| return !!(c->offermsg.offer.chn_flags & |
| VMBUS_CHANNEL_TLNPI_PROVIDER_OFFER); |
| } |
| |
| static inline bool is_sub_channel(const struct vmbus_channel *c) |
| { |
| return c->offermsg.offer.sub_channel_index != 0; |
| } |
| |
| static inline void set_channel_read_mode(struct vmbus_channel *c, |
| enum hv_callback_mode mode) |
| { |
| c->callback_mode = mode; |
| } |
| |
| static inline void set_per_channel_state(struct vmbus_channel *c, void *s) |
| { |
| c->per_channel_state = s; |
| } |
| |
| static inline void *get_per_channel_state(struct vmbus_channel *c) |
| { |
| return c->per_channel_state; |
| } |
| |
| static inline void set_channel_pending_send_size(struct vmbus_channel *c, |
| u32 size) |
| { |
| unsigned long flags; |
| |
| if (size) { |
| spin_lock_irqsave(&c->outbound.ring_lock, flags); |
| ++c->out_full_total; |
| |
| if (!c->out_full_flag) { |
| ++c->out_full_first; |
| c->out_full_flag = true; |
| } |
| spin_unlock_irqrestore(&c->outbound.ring_lock, flags); |
| } else { |
| c->out_full_flag = false; |
| } |
| |
| c->outbound.ring_buffer->pending_send_sz = size; |
| } |
| |
| static inline void set_low_latency_mode(struct vmbus_channel *c) |
| { |
| c->low_latency = true; |
| } |
| |
| static inline void clear_low_latency_mode(struct vmbus_channel *c) |
| { |
| c->low_latency = false; |
| } |
| |
| void vmbus_onmessage(struct vmbus_channel_message_header *hdr); |
| |
| int vmbus_request_offers(void); |
| |
| /* |
| * APIs for managing sub-channels. |
| */ |
| |
| void vmbus_set_sc_create_callback(struct vmbus_channel *primary_channel, |
| void (*sc_cr_cb)(struct vmbus_channel *new_sc)); |
| |
| void vmbus_set_chn_rescind_callback(struct vmbus_channel *channel, |
| void (*chn_rescind_cb)(struct vmbus_channel *)); |
| |
| /* |
| * Check if sub-channels have already been offerred. This API will be useful |
| * when the driver is unloaded after establishing sub-channels. In this case, |
| * when the driver is re-loaded, the driver would have to check if the |
| * subchannels have already been established before attempting to request |
| * the creation of sub-channels. |
| * This function returns TRUE to indicate that subchannels have already been |
| * created. |
| * This function should be invoked after setting the callback function for |
| * sub-channel creation. |
| */ |
| bool vmbus_are_subchannels_present(struct vmbus_channel *primary); |
| |
| /* The format must be the same as struct vmdata_gpa_direct */ |
| struct vmbus_channel_packet_page_buffer { |
| u16 type; |
| u16 dataoffset8; |
| u16 length8; |
| u16 flags; |
| u64 transactionid; |
| u32 reserved; |
| u32 rangecount; |
| struct hv_page_buffer range[MAX_PAGE_BUFFER_COUNT]; |
| } __packed; |
| |
| /* The format must be the same as struct vmdata_gpa_direct */ |
| struct vmbus_channel_packet_multipage_buffer { |
| u16 type; |
| u16 dataoffset8; |
| u16 length8; |
| u16 flags; |
| u64 transactionid; |
| u32 reserved; |
| u32 rangecount; /* Always 1 in this case */ |
| struct hv_multipage_buffer range; |
| } __packed; |
| |
| /* The format must be the same as struct vmdata_gpa_direct */ |
| struct vmbus_packet_mpb_array { |
| u16 type; |
| u16 dataoffset8; |
| u16 length8; |
| u16 flags; |
| u64 transactionid; |
| u32 reserved; |
| u32 rangecount; /* Always 1 in this case */ |
| struct hv_mpb_array range; |
| } __packed; |
| |
| int vmbus_alloc_ring(struct vmbus_channel *channel, |
| u32 send_size, u32 recv_size); |
| void vmbus_free_ring(struct vmbus_channel *channel); |
| |
| int vmbus_connect_ring(struct vmbus_channel *channel, |
| void (*onchannel_callback)(void *context), |
| void *context); |
| int vmbus_disconnect_ring(struct vmbus_channel *channel); |
| |
| extern int vmbus_open(struct vmbus_channel *channel, |
| u32 send_ringbuffersize, |
| u32 recv_ringbuffersize, |
| void *userdata, |
| u32 userdatalen, |
| void (*onchannel_callback)(void *context), |
| void *context); |
| |
| extern void vmbus_close(struct vmbus_channel *channel); |
| |
| extern int vmbus_sendpacket(struct vmbus_channel *channel, |
| void *buffer, |
| u32 bufferLen, |
| u64 requestid, |
| enum vmbus_packet_type type, |
| u32 flags); |
| |
| extern int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel, |
| struct hv_page_buffer pagebuffers[], |
| u32 pagecount, |
| void *buffer, |
| u32 bufferlen, |
| u64 requestid); |
| |
| extern int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel, |
| struct vmbus_packet_mpb_array *mpb, |
| u32 desc_size, |
| void *buffer, |
| u32 bufferlen, |
| u64 requestid); |
| |
| extern int vmbus_establish_gpadl(struct vmbus_channel *channel, |
| void *kbuffer, |
| u32 size, |
| u32 *gpadl_handle); |
| |
| extern int vmbus_teardown_gpadl(struct vmbus_channel *channel, |
| u32 gpadl_handle); |
| |
| void vmbus_reset_channel_cb(struct vmbus_channel *channel); |
| |
| extern int vmbus_recvpacket(struct vmbus_channel *channel, |
| void *buffer, |
| u32 bufferlen, |
| u32 *buffer_actual_len, |
| u64 *requestid); |
| |
| extern int vmbus_recvpacket_raw(struct vmbus_channel *channel, |
| void *buffer, |
| u32 bufferlen, |
| u32 *buffer_actual_len, |
| u64 *requestid); |
| |
| |
| extern void vmbus_ontimer(unsigned long data); |
| |
| /* Base driver object */ |
| struct hv_driver { |
| const char *name; |
| |
| /* |
| * A hvsock offer, which has a VMBUS_CHANNEL_TLNPI_PROVIDER_OFFER |
| * channel flag, actually doesn't mean a synthetic device because the |
| * offer's if_type/if_instance can change for every new hvsock |
| * connection. |
| * |
| * However, to facilitate the notification of new-offer/rescind-offer |
| * from vmbus driver to hvsock driver, we can handle hvsock offer as |
| * a special vmbus device, and hence we need the below flag to |
| * indicate if the driver is the hvsock driver or not: we need to |
| * specially treat the hvosck offer & driver in vmbus_match(). |
| */ |
| bool hvsock; |
| |
| /* the device type supported by this driver */ |
| guid_t dev_type; |
| const struct hv_vmbus_device_id *id_table; |
| |
| struct device_driver driver; |
| |
| /* dynamic device GUID's */ |
| struct { |
| spinlock_t lock; |
| struct list_head list; |
| } dynids; |
| |
| int (*probe)(struct hv_device *, const struct hv_vmbus_device_id *); |
| int (*remove)(struct hv_device *); |
| void (*shutdown)(struct hv_device *); |
| |
| int (*suspend)(struct hv_device *); |
| int (*resume)(struct hv_device *); |
| |
| }; |
| |
| /* Base device object */ |
| struct hv_device { |
| /* the device type id of this device */ |
| guid_t dev_type; |
| |
| /* the device instance id of this device */ |
| guid_t dev_instance; |
| u16 vendor_id; |
| u16 device_id; |
| |
| struct device device; |
| char *driver_override; /* Driver name to force a match */ |
| |
| struct vmbus_channel *channel; |
| struct kset *channels_kset; |
| |
| /* place holder to keep track of the dir for hv device in debugfs */ |
| struct dentry *debug_dir; |
| |
| }; |
| |
| |
| static inline struct hv_device *device_to_hv_device(struct device *d) |
| { |
| return container_of(d, struct hv_device, device); |
| } |
| |
| static inline struct hv_driver *drv_to_hv_drv(struct device_driver *d) |
| { |
| return container_of(d, struct hv_driver, driver); |
| } |
| |
| static inline void hv_set_drvdata(struct hv_device *dev, void *data) |
| { |
| dev_set_drvdata(&dev->device, data); |
| } |
| |
| static inline void *hv_get_drvdata(struct hv_device *dev) |
| { |
| return dev_get_drvdata(&dev->device); |
| } |
| |
| struct hv_ring_buffer_debug_info { |
| u32 current_interrupt_mask; |
| u32 current_read_index; |
| u32 current_write_index; |
| u32 bytes_avail_toread; |
| u32 bytes_avail_towrite; |
| }; |
| |
| |
| int hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info, |
| struct hv_ring_buffer_debug_info *debug_info); |
| |
| /* Vmbus interface */ |
| #define vmbus_driver_register(driver) \ |
| __vmbus_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) |
| int __must_check __vmbus_driver_register(struct hv_driver *hv_driver, |
| struct module *owner, |
| const char *mod_name); |
| void vmbus_driver_unregister(struct hv_driver *hv_driver); |
| |
| void vmbus_hvsock_device_unregister(struct vmbus_channel *channel); |
| |
| int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, |
| resource_size_t min, resource_size_t max, |
| resource_size_t size, resource_size_t align, |
| bool fb_overlap_ok); |
| void vmbus_free_mmio(resource_size_t start, resource_size_t size); |
| |
| /* |
| * GUID definitions of various offer types - services offered to the guest. |
| */ |
| |
| /* |
| * Network GUID |
| * {f8615163-df3e-46c5-913f-f2d2f965ed0e} |
| */ |
| #define HV_NIC_GUID \ |
| .guid = GUID_INIT(0xf8615163, 0xdf3e, 0x46c5, 0x91, 0x3f, \ |
| 0xf2, 0xd2, 0xf9, 0x65, 0xed, 0x0e) |
| |
| /* |
| * IDE GUID |
| * {32412632-86cb-44a2-9b5c-50d1417354f5} |
| */ |
| #define HV_IDE_GUID \ |
| .guid = GUID_INIT(0x32412632, 0x86cb, 0x44a2, 0x9b, 0x5c, \ |
| 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5) |
| |
| /* |
| * SCSI GUID |
| * {ba6163d9-04a1-4d29-b605-72e2ffb1dc7f} |
| */ |
| #define HV_SCSI_GUID \ |
| .guid = GUID_INIT(0xba6163d9, 0x04a1, 0x4d29, 0xb6, 0x05, \ |
| 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f) |
| |
| /* |
| * Shutdown GUID |
| * {0e0b6031-5213-4934-818b-38d90ced39db} |
| */ |
| #define HV_SHUTDOWN_GUID \ |
| .guid = GUID_INIT(0x0e0b6031, 0x5213, 0x4934, 0x81, 0x8b, \ |
| 0x38, 0xd9, 0x0c, 0xed, 0x39, 0xdb) |
| |
| /* |
| * Time Synch GUID |
| * {9527E630-D0AE-497b-ADCE-E80AB0175CAF} |
| */ |
| #define HV_TS_GUID \ |
| .guid = GUID_INIT(0x9527e630, 0xd0ae, 0x497b, 0xad, 0xce, \ |
| 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf) |
| |
| /* |
| * Heartbeat GUID |
| * {57164f39-9115-4e78-ab55-382f3bd5422d} |
| */ |
| #define HV_HEART_BEAT_GUID \ |
| .guid = GUID_INIT(0x57164f39, 0x9115, 0x4e78, 0xab, 0x55, \ |
| 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d) |
| |
| /* |
| * KVP GUID |
| * {a9a0f4e7-5a45-4d96-b827-8a841e8c03e6} |
| */ |
| #define HV_KVP_GUID \ |
| .guid = GUID_INIT(0xa9a0f4e7, 0x5a45, 0x4d96, 0xb8, 0x27, \ |
| 0x8a, 0x84, 0x1e, 0x8c, 0x03, 0xe6) |
| |
| /* |
| * Dynamic memory GUID |
| * {525074dc-8985-46e2-8057-a307dc18a502} |
| */ |
| #define HV_DM_GUID \ |
| .guid = GUID_INIT(0x525074dc, 0x8985, 0x46e2, 0x80, 0x57, \ |
| 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02) |
| |
| /* |
| * Mouse GUID |
| * {cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a} |
| */ |
| #define HV_MOUSE_GUID \ |
| .guid = GUID_INIT(0xcfa8b69e, 0x5b4a, 0x4cc0, 0xb9, 0x8b, \ |
| 0x8b, 0xa1, 0xa1, 0xf3, 0xf9, 0x5a) |
| |
| /* |
| * Keyboard GUID |
| * {f912ad6d-2b17-48ea-bd65-f927a61c7684} |
| */ |
| #define HV_KBD_GUID \ |
| .guid = GUID_INIT(0xf912ad6d, 0x2b17, 0x48ea, 0xbd, 0x65, \ |
| 0xf9, 0x27, 0xa6, 0x1c, 0x76, 0x84) |
| |
| /* |
| * VSS (Backup/Restore) GUID |
| */ |
| #define HV_VSS_GUID \ |
| .guid = GUID_INIT(0x35fa2e29, 0xea23, 0x4236, 0x96, 0xae, \ |
| 0x3a, 0x6e, 0xba, 0xcb, 0xa4, 0x40) |
| /* |
| * Synthetic Video GUID |
| * {DA0A7802-E377-4aac-8E77-0558EB1073F8} |
| */ |
| #define HV_SYNTHVID_GUID \ |
| .guid = GUID_INIT(0xda0a7802, 0xe377, 0x4aac, 0x8e, 0x77, \ |
| 0x05, 0x58, 0xeb, 0x10, 0x73, 0xf8) |
| |
| /* |
| * Synthetic FC GUID |
| * {2f9bcc4a-0069-4af3-b76b-6fd0be528cda} |
| */ |
| #define HV_SYNTHFC_GUID \ |
| .guid = GUID_INIT(0x2f9bcc4a, 0x0069, 0x4af3, 0xb7, 0x6b, \ |
| 0x6f, 0xd0, 0xbe, 0x52, 0x8c, 0xda) |
| |
| /* |
| * Guest File Copy Service |
| * {34D14BE3-DEE4-41c8-9AE7-6B174977C192} |
| */ |
| |
| #define HV_FCOPY_GUID \ |
| .guid = GUID_INIT(0x34d14be3, 0xdee4, 0x41c8, 0x9a, 0xe7, \ |
| 0x6b, 0x17, 0x49, 0x77, 0xc1, 0x92) |
| |
| /* |
| * NetworkDirect. This is the guest RDMA service. |
| * {8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501} |
| */ |
| #define HV_ND_GUID \ |
| .guid = GUID_INIT(0x8c2eaf3d, 0x32a7, 0x4b09, 0xab, 0x99, \ |
| 0xbd, 0x1f, 0x1c, 0x86, 0xb5, 0x01) |
| |
| /* |
| * PCI Express Pass Through |
| * {44C4F61D-4444-4400-9D52-802E27EDE19F} |
| */ |
| |
| #define HV_PCIE_GUID \ |
| .guid = GUID_INIT(0x44c4f61d, 0x4444, 0x4400, 0x9d, 0x52, \ |
| 0x80, 0x2e, 0x27, 0xed, 0xe1, 0x9f) |
| |
| /* |
| * Linux doesn't support the 3 devices: the first two are for |
| * Automatic Virtual Machine Activation, and the third is for |
| * Remote Desktop Virtualization. |
| * {f8e65716-3cb3-4a06-9a60-1889c5cccab5} |
| * {3375baf4-9e15-4b30-b765-67acb10d607b} |
| * {276aacf4-ac15-426c-98dd-7521ad3f01fe} |
| */ |
| |
| #define HV_AVMA1_GUID \ |
| .guid = GUID_INIT(0xf8e65716, 0x3cb3, 0x4a06, 0x9a, 0x60, \ |
| 0x18, 0x89, 0xc5, 0xcc, 0xca, 0xb5) |
| |
| #define HV_AVMA2_GUID \ |
| .guid = GUID_INIT(0x3375baf4, 0x9e15, 0x4b30, 0xb7, 0x65, \ |
| 0x67, 0xac, 0xb1, 0x0d, 0x60, 0x7b) |
| |
| #define HV_RDV_GUID \ |
| .guid = GUID_INIT(0x276aacf4, 0xac15, 0x426c, 0x98, 0xdd, \ |
| 0x75, 0x21, 0xad, 0x3f, 0x01, 0xfe) |
| |
| /* |
| * Common header for Hyper-V ICs |
| */ |
| |
| #define ICMSGTYPE_NEGOTIATE 0 |
| #define ICMSGTYPE_HEARTBEAT 1 |
| #define ICMSGTYPE_KVPEXCHANGE 2 |
| #define ICMSGTYPE_SHUTDOWN 3 |
| #define ICMSGTYPE_TIMESYNC 4 |
| #define ICMSGTYPE_VSS 5 |
| |
| #define ICMSGHDRFLAG_TRANSACTION 1 |
| #define ICMSGHDRFLAG_REQUEST 2 |
| #define ICMSGHDRFLAG_RESPONSE 4 |
| |
| |
| /* |
| * While we want to handle util services as regular devices, |
| * there is only one instance of each of these services; so |
| * we statically allocate the service specific state. |
| */ |
| |
| struct hv_util_service { |
| u8 *recv_buffer; |
| void *channel; |
| void (*util_cb)(void *); |
| int (*util_init)(struct hv_util_service *); |
| void (*util_deinit)(void); |
| int (*util_pre_suspend)(void); |
| int (*util_pre_resume)(void); |
| }; |
| |
| struct vmbuspipe_hdr { |
| u32 flags; |
| u32 msgsize; |
| } __packed; |
| |
| struct ic_version { |
| u16 major; |
| u16 minor; |
| } __packed; |
| |
| struct icmsg_hdr { |
| struct ic_version icverframe; |
| u16 icmsgtype; |
| struct ic_version icvermsg; |
| u16 icmsgsize; |
| u32 status; |
| u8 ictransaction_id; |
| u8 icflags; |
| u8 reserved[2]; |
| } __packed; |
| |
| struct icmsg_negotiate { |
| u16 icframe_vercnt; |
| u16 icmsg_vercnt; |
| u32 reserved; |
| struct ic_version icversion_data[1]; /* any size array */ |
| } __packed; |
| |
| struct shutdown_msg_data { |
| u32 reason_code; |
| u32 timeout_seconds; |
| u32 flags; |
| u8 display_message[2048]; |
| } __packed; |
| |
| struct heartbeat_msg_data { |
| u64 seq_num; |
| u32 reserved[8]; |
| } __packed; |
| |
| /* Time Sync IC defs */ |
| #define ICTIMESYNCFLAG_PROBE 0 |
| #define ICTIMESYNCFLAG_SYNC 1 |
| #define ICTIMESYNCFLAG_SAMPLE 2 |
| |
| #ifdef __x86_64__ |
| #define WLTIMEDELTA 116444736000000000L /* in 100ns unit */ |
| #else |
| #define WLTIMEDELTA 116444736000000000LL |
| #endif |
| |
| struct ictimesync_data { |
| u64 parenttime; |
| u64 childtime; |
| u64 roundtriptime; |
| u8 flags; |
| } __packed; |
| |
| struct ictimesync_ref_data { |
| u64 parenttime; |
| u64 vmreferencetime; |
| u8 flags; |
| char leapflags; |
| char stratum; |
| u8 reserved[3]; |
| } __packed; |
| |
| struct hyperv_service_callback { |
| u8 msg_type; |
| char *log_msg; |
| guid_t data; |
| struct vmbus_channel *channel; |
| void (*callback)(void *context); |
| }; |
| |
| #define MAX_SRV_VER 0x7ffffff |
| extern bool vmbus_prep_negotiate_resp(struct icmsg_hdr *icmsghdrp, u8 *buf, |
| const int *fw_version, int fw_vercnt, |
| const int *srv_version, int srv_vercnt, |
| int *nego_fw_version, int *nego_srv_version); |
| |
| void hv_process_channel_removal(struct vmbus_channel *channel); |
| |
| void vmbus_setevent(struct vmbus_channel *channel); |
| /* |
| * Negotiated version with the Host. |
| */ |
| |
| extern __u32 vmbus_proto_version; |
| |
| int vmbus_send_tl_connect_request(const guid_t *shv_guest_servie_id, |
| const guid_t *shv_host_servie_id); |
| int vmbus_send_modifychannel(u32 child_relid, u32 target_vp); |
| void vmbus_set_event(struct vmbus_channel *channel); |
| |
| /* Get the start of the ring buffer. */ |
| static inline void * |
| hv_get_ring_buffer(const struct hv_ring_buffer_info *ring_info) |
| { |
| return ring_info->ring_buffer->buffer; |
| } |
| |
| /* |
| * Mask off host interrupt callback notifications |
| */ |
| static inline void hv_begin_read(struct hv_ring_buffer_info *rbi) |
| { |
| rbi->ring_buffer->interrupt_mask = 1; |
| |
| /* make sure mask update is not reordered */ |
| virt_mb(); |
| } |
| |
| /* |
| * Re-enable host callback and return number of outstanding bytes |
| */ |
| static inline u32 hv_end_read(struct hv_ring_buffer_info *rbi) |
| { |
| |
| rbi->ring_buffer->interrupt_mask = 0; |
| |
| /* make sure mask update is not reordered */ |
| virt_mb(); |
| |
| /* |
| * Now check to see if the ring buffer is still empty. |
| * If it is not, we raced and we need to process new |
| * incoming messages. |
| */ |
| return hv_get_bytes_to_read(rbi); |
| } |
| |
| /* |
| * An API to support in-place processing of incoming VMBUS packets. |
| */ |
| |
| /* Get data payload associated with descriptor */ |
| static inline void *hv_pkt_data(const struct vmpacket_descriptor *desc) |
| { |
| return (void *)((unsigned long)desc + (desc->offset8 << 3)); |
| } |
| |
| /* Get data size associated with descriptor */ |
| static inline u32 hv_pkt_datalen(const struct vmpacket_descriptor *desc) |
| { |
| return (desc->len8 << 3) - (desc->offset8 << 3); |
| } |
| |
| |
| struct vmpacket_descriptor * |
| hv_pkt_iter_first(struct vmbus_channel *channel); |
| |
| struct vmpacket_descriptor * |
| __hv_pkt_iter_next(struct vmbus_channel *channel, |
| const struct vmpacket_descriptor *pkt); |
| |
| void hv_pkt_iter_close(struct vmbus_channel *channel); |
| |
| /* |
| * Get next packet descriptor from iterator |
| * If at end of list, return NULL and update host. |
| */ |
| static inline struct vmpacket_descriptor * |
| hv_pkt_iter_next(struct vmbus_channel *channel, |
| const struct vmpacket_descriptor *pkt) |
| { |
| struct vmpacket_descriptor *nxt; |
| |
| nxt = __hv_pkt_iter_next(channel, pkt); |
| if (!nxt) |
| hv_pkt_iter_close(channel); |
| |
| return nxt; |
| } |
| |
| #define foreach_vmbus_pkt(pkt, channel) \ |
| for (pkt = hv_pkt_iter_first(channel); pkt; \ |
| pkt = hv_pkt_iter_next(channel, pkt)) |
| |
| /* |
| * Interface for passing data between SR-IOV PF and VF drivers. The VF driver |
| * sends requests to read and write blocks. Each block must be 128 bytes or |
| * smaller. Optionally, the VF driver can register a callback function which |
| * will be invoked when the host says that one or more of the first 64 block |
| * IDs is "invalid" which means that the VF driver should reread them. |
| */ |
| #define HV_CONFIG_BLOCK_SIZE_MAX 128 |
| |
| int hyperv_read_cfg_blk(struct pci_dev *dev, void *buf, unsigned int buf_len, |
| unsigned int block_id, unsigned int *bytes_returned); |
| int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len, |
| unsigned int block_id); |
| int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context, |
| void (*block_invalidate)(void *context, |
| u64 block_mask)); |
| |
| struct hyperv_pci_block_ops { |
| int (*read_block)(struct pci_dev *dev, void *buf, unsigned int buf_len, |
| unsigned int block_id, unsigned int *bytes_returned); |
| int (*write_block)(struct pci_dev *dev, void *buf, unsigned int len, |
| unsigned int block_id); |
| int (*reg_blk_invalidate)(struct pci_dev *dev, void *context, |
| void (*block_invalidate)(void *context, |
| u64 block_mask)); |
| }; |
| |
| extern struct hyperv_pci_block_ops hvpci_block_ops; |
| |
| static inline unsigned long virt_to_hvpfn(void *addr) |
| { |
| phys_addr_t paddr; |
| |
| if (is_vmalloc_addr(addr)) |
| paddr = page_to_phys(vmalloc_to_page(addr)) + |
| offset_in_page(addr); |
| else |
| paddr = __pa(addr); |
| |
| return paddr >> HV_HYP_PAGE_SHIFT; |
| } |
| |
| #define NR_HV_HYP_PAGES_IN_PAGE (PAGE_SIZE / HV_HYP_PAGE_SIZE) |
| #define offset_in_hvpage(ptr) ((unsigned long)(ptr) & ~HV_HYP_PAGE_MASK) |
| #define HVPFN_UP(x) (((x) + HV_HYP_PAGE_SIZE-1) >> HV_HYP_PAGE_SHIFT) |
| #define page_to_hvpfn(page) (page_to_pfn(page) * NR_HV_HYP_PAGES_IN_PAGE) |
| |
| #endif /* _HYPERV_H */ |