| /* |
| * Copyright (C) 2017, Microsoft Corporation. |
| * |
| * Author(s): Long Li <longli@microsoft.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See |
| * the GNU General Public License for more details. |
| */ |
| #include <linux/module.h> |
| #include <linux/highmem.h> |
| #include "smbdirect.h" |
| #include "cifs_debug.h" |
| |
| static struct smbd_response *get_empty_queue_buffer( |
| struct smbd_connection *info); |
| static struct smbd_response *get_receive_buffer( |
| struct smbd_connection *info); |
| static void put_receive_buffer( |
| struct smbd_connection *info, |
| struct smbd_response *response); |
| static int allocate_receive_buffers(struct smbd_connection *info, int num_buf); |
| static void destroy_receive_buffers(struct smbd_connection *info); |
| |
| static void put_empty_packet( |
| struct smbd_connection *info, struct smbd_response *response); |
| static void enqueue_reassembly( |
| struct smbd_connection *info, |
| struct smbd_response *response, int data_length); |
| static struct smbd_response *_get_first_reassembly( |
| struct smbd_connection *info); |
| |
| static int smbd_post_recv( |
| struct smbd_connection *info, |
| struct smbd_response *response); |
| |
| static int smbd_post_send_empty(struct smbd_connection *info); |
| |
| /* SMBD version number */ |
| #define SMBD_V1 0x0100 |
| |
| /* Port numbers for SMBD transport */ |
| #define SMB_PORT 445 |
| #define SMBD_PORT 5445 |
| |
| /* Address lookup and resolve timeout in ms */ |
| #define RDMA_RESOLVE_TIMEOUT 5000 |
| |
| /* SMBD negotiation timeout in seconds */ |
| #define SMBD_NEGOTIATE_TIMEOUT 120 |
| |
| /* SMBD minimum receive size and fragmented sized defined in [MS-SMBD] */ |
| #define SMBD_MIN_RECEIVE_SIZE 128 |
| #define SMBD_MIN_FRAGMENTED_SIZE 131072 |
| |
| /* |
| * Default maximum number of RDMA read/write outstanding on this connection |
| * This value is possibly decreased during QP creation on hardware limit |
| */ |
| #define SMBD_CM_RESPONDER_RESOURCES 32 |
| |
| /* Maximum number of retries on data transfer operations */ |
| #define SMBD_CM_RETRY 6 |
| /* No need to retry on Receiver Not Ready since SMBD manages credits */ |
| #define SMBD_CM_RNR_RETRY 0 |
| |
| /* |
| * User configurable initial values per SMBD transport connection |
| * as defined in [MS-SMBD] 3.1.1.1 |
| * Those may change after a SMBD negotiation |
| */ |
| /* The local peer's maximum number of credits to grant to the peer */ |
| int smbd_receive_credit_max = 255; |
| |
| /* The remote peer's credit request of local peer */ |
| int smbd_send_credit_target = 255; |
| |
| /* The maximum single message size can be sent to remote peer */ |
| int smbd_max_send_size = 1364; |
| |
| /* The maximum fragmented upper-layer payload receive size supported */ |
| int smbd_max_fragmented_recv_size = 1024 * 1024; |
| |
| /* The maximum single-message size which can be received */ |
| int smbd_max_receive_size = 8192; |
| |
| /* The timeout to initiate send of a keepalive message on idle */ |
| int smbd_keep_alive_interval = 120; |
| |
| /* |
| * User configurable initial values for RDMA transport |
| * The actual values used may be lower and are limited to hardware capabilities |
| */ |
| /* Default maximum number of SGEs in a RDMA write/read */ |
| int smbd_max_frmr_depth = 2048; |
| |
| /* If payload is less than this byte, use RDMA send/recv not read/write */ |
| int rdma_readwrite_threshold = 4096; |
| |
| /* Transport logging functions |
| * Logging are defined as classes. They can be OR'ed to define the actual |
| * logging level via module parameter smbd_logging_class |
| * e.g. cifs.smbd_logging_class=0xa0 will log all log_rdma_recv() and |
| * log_rdma_event() |
| */ |
| #define LOG_OUTGOING 0x1 |
| #define LOG_INCOMING 0x2 |
| #define LOG_READ 0x4 |
| #define LOG_WRITE 0x8 |
| #define LOG_RDMA_SEND 0x10 |
| #define LOG_RDMA_RECV 0x20 |
| #define LOG_KEEP_ALIVE 0x40 |
| #define LOG_RDMA_EVENT 0x80 |
| #define LOG_RDMA_MR 0x100 |
| static unsigned int smbd_logging_class; |
| module_param(smbd_logging_class, uint, 0644); |
| MODULE_PARM_DESC(smbd_logging_class, |
| "Logging class for SMBD transport 0x0 to 0x100"); |
| |
| #define ERR 0x0 |
| #define INFO 0x1 |
| static unsigned int smbd_logging_level = ERR; |
| module_param(smbd_logging_level, uint, 0644); |
| MODULE_PARM_DESC(smbd_logging_level, |
| "Logging level for SMBD transport, 0 (default): error, 1: info"); |
| |
| #define log_rdma(level, class, fmt, args...) \ |
| do { \ |
| if (level <= smbd_logging_level || class & smbd_logging_class) \ |
| cifs_dbg(VFS, "%s:%d " fmt, __func__, __LINE__, ##args);\ |
| } while (0) |
| |
| #define log_outgoing(level, fmt, args...) \ |
| log_rdma(level, LOG_OUTGOING, fmt, ##args) |
| #define log_incoming(level, fmt, args...) \ |
| log_rdma(level, LOG_INCOMING, fmt, ##args) |
| #define log_read(level, fmt, args...) log_rdma(level, LOG_READ, fmt, ##args) |
| #define log_write(level, fmt, args...) log_rdma(level, LOG_WRITE, fmt, ##args) |
| #define log_rdma_send(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_SEND, fmt, ##args) |
| #define log_rdma_recv(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_RECV, fmt, ##args) |
| #define log_keep_alive(level, fmt, args...) \ |
| log_rdma(level, LOG_KEEP_ALIVE, fmt, ##args) |
| #define log_rdma_event(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_EVENT, fmt, ##args) |
| #define log_rdma_mr(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_MR, fmt, ##args) |
| |
| /* |
| * Destroy the transport and related RDMA and memory resources |
| * Need to go through all the pending counters and make sure on one is using |
| * the transport while it is destroyed |
| */ |
| static void smbd_destroy_rdma_work(struct work_struct *work) |
| { |
| struct smbd_response *response; |
| struct smbd_connection *info = |
| container_of(work, struct smbd_connection, destroy_work); |
| unsigned long flags; |
| |
| log_rdma_event(INFO, "destroying qp\n"); |
| ib_drain_qp(info->id->qp); |
| rdma_destroy_qp(info->id); |
| |
| /* Unblock all I/O waiting on the send queue */ |
| wake_up_interruptible_all(&info->wait_send_queue); |
| |
| log_rdma_event(INFO, "cancelling idle timer\n"); |
| cancel_delayed_work_sync(&info->idle_timer_work); |
| log_rdma_event(INFO, "cancelling send immediate work\n"); |
| cancel_delayed_work_sync(&info->send_immediate_work); |
| |
| log_rdma_event(INFO, "wait for all recv to finish\n"); |
| wake_up_interruptible(&info->wait_reassembly_queue); |
| wait_event(info->wait_smbd_recv_pending, |
| info->smbd_recv_pending == 0); |
| |
| log_rdma_event(INFO, "wait for all send posted to IB to finish\n"); |
| wait_event(info->wait_send_pending, |
| atomic_read(&info->send_pending) == 0); |
| wait_event(info->wait_send_payload_pending, |
| atomic_read(&info->send_payload_pending) == 0); |
| |
| /* It's not posssible for upper layer to get to reassembly */ |
| log_rdma_event(INFO, "drain the reassembly queue\n"); |
| do { |
| spin_lock_irqsave(&info->reassembly_queue_lock, flags); |
| response = _get_first_reassembly(info); |
| if (response) { |
| list_del(&response->list); |
| spin_unlock_irqrestore( |
| &info->reassembly_queue_lock, flags); |
| put_receive_buffer(info, response); |
| } |
| } while (response); |
| spin_unlock_irqrestore(&info->reassembly_queue_lock, flags); |
| info->reassembly_data_length = 0; |
| |
| log_rdma_event(INFO, "free receive buffers\n"); |
| wait_event(info->wait_receive_queues, |
| info->count_receive_queue + info->count_empty_packet_queue |
| == info->receive_credit_max); |
| destroy_receive_buffers(info); |
| |
| ib_free_cq(info->send_cq); |
| ib_free_cq(info->recv_cq); |
| ib_dealloc_pd(info->pd); |
| rdma_destroy_id(info->id); |
| |
| /* free mempools */ |
| mempool_destroy(info->request_mempool); |
| kmem_cache_destroy(info->request_cache); |
| |
| mempool_destroy(info->response_mempool); |
| kmem_cache_destroy(info->response_cache); |
| |
| info->transport_status = SMBD_DESTROYED; |
| wake_up_all(&info->wait_destroy); |
| } |
| |
| static int smbd_process_disconnected(struct smbd_connection *info) |
| { |
| schedule_work(&info->destroy_work); |
| return 0; |
| } |
| |
| static void smbd_disconnect_rdma_work(struct work_struct *work) |
| { |
| struct smbd_connection *info = |
| container_of(work, struct smbd_connection, disconnect_work); |
| |
| if (info->transport_status == SMBD_CONNECTED) { |
| info->transport_status = SMBD_DISCONNECTING; |
| rdma_disconnect(info->id); |
| } |
| } |
| |
| static void smbd_disconnect_rdma_connection(struct smbd_connection *info) |
| { |
| queue_work(info->workqueue, &info->disconnect_work); |
| } |
| |
| /* Upcall from RDMA CM */ |
| static int smbd_conn_upcall( |
| struct rdma_cm_id *id, struct rdma_cm_event *event) |
| { |
| struct smbd_connection *info = id->context; |
| |
| log_rdma_event(INFO, "event=%d status=%d\n", |
| event->event, event->status); |
| |
| switch (event->event) { |
| case RDMA_CM_EVENT_ADDR_RESOLVED: |
| case RDMA_CM_EVENT_ROUTE_RESOLVED: |
| info->ri_rc = 0; |
| complete(&info->ri_done); |
| break; |
| |
| case RDMA_CM_EVENT_ADDR_ERROR: |
| info->ri_rc = -EHOSTUNREACH; |
| complete(&info->ri_done); |
| break; |
| |
| case RDMA_CM_EVENT_ROUTE_ERROR: |
| info->ri_rc = -ENETUNREACH; |
| complete(&info->ri_done); |
| break; |
| |
| case RDMA_CM_EVENT_ESTABLISHED: |
| log_rdma_event(INFO, "connected event=%d\n", event->event); |
| info->transport_status = SMBD_CONNECTED; |
| wake_up_interruptible(&info->conn_wait); |
| break; |
| |
| case RDMA_CM_EVENT_CONNECT_ERROR: |
| case RDMA_CM_EVENT_UNREACHABLE: |
| case RDMA_CM_EVENT_REJECTED: |
| log_rdma_event(INFO, "connecting failed event=%d\n", event->event); |
| info->transport_status = SMBD_DISCONNECTED; |
| wake_up_interruptible(&info->conn_wait); |
| break; |
| |
| case RDMA_CM_EVENT_DEVICE_REMOVAL: |
| case RDMA_CM_EVENT_DISCONNECTED: |
| /* This happenes when we fail the negotiation */ |
| if (info->transport_status == SMBD_NEGOTIATE_FAILED) { |
| info->transport_status = SMBD_DISCONNECTED; |
| wake_up(&info->conn_wait); |
| break; |
| } |
| |
| info->transport_status = SMBD_DISCONNECTED; |
| smbd_process_disconnected(info); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* Upcall from RDMA QP */ |
| static void |
| smbd_qp_async_error_upcall(struct ib_event *event, void *context) |
| { |
| struct smbd_connection *info = context; |
| |
| log_rdma_event(ERR, "%s on device %s info %p\n", |
| ib_event_msg(event->event), event->device->name, info); |
| |
| switch (event->event) { |
| case IB_EVENT_CQ_ERR: |
| case IB_EVENT_QP_FATAL: |
| smbd_disconnect_rdma_connection(info); |
| |
| default: |
| break; |
| } |
| } |
| |
| static inline void *smbd_request_payload(struct smbd_request *request) |
| { |
| return (void *)request->packet; |
| } |
| |
| static inline void *smbd_response_payload(struct smbd_response *response) |
| { |
| return (void *)response->packet; |
| } |
| |
| /* Called when a RDMA send is done */ |
| static void send_done(struct ib_cq *cq, struct ib_wc *wc) |
| { |
| int i; |
| struct smbd_request *request = |
| container_of(wc->wr_cqe, struct smbd_request, cqe); |
| |
| log_rdma_send(INFO, "smbd_request %p completed wc->status=%d\n", |
| request, wc->status); |
| |
| if (wc->status != IB_WC_SUCCESS || wc->opcode != IB_WC_SEND) { |
| log_rdma_send(ERR, "wc->status=%d wc->opcode=%d\n", |
| wc->status, wc->opcode); |
| smbd_disconnect_rdma_connection(request->info); |
| } |
| |
| for (i = 0; i < request->num_sge; i++) |
| ib_dma_unmap_single(request->info->id->device, |
| request->sge[i].addr, |
| request->sge[i].length, |
| DMA_TO_DEVICE); |
| |
| if (request->has_payload) { |
| if (atomic_dec_and_test(&request->info->send_payload_pending)) |
| wake_up(&request->info->wait_send_payload_pending); |
| } else { |
| if (atomic_dec_and_test(&request->info->send_pending)) |
| wake_up(&request->info->wait_send_pending); |
| } |
| |
| mempool_free(request, request->info->request_mempool); |
| } |
| |
| static void dump_smbd_negotiate_resp(struct smbd_negotiate_resp *resp) |
| { |
| log_rdma_event(INFO, "resp message min_version %u max_version %u " |
| "negotiated_version %u credits_requested %u " |
| "credits_granted %u status %u max_readwrite_size %u " |
| "preferred_send_size %u max_receive_size %u " |
| "max_fragmented_size %u\n", |
| resp->min_version, resp->max_version, resp->negotiated_version, |
| resp->credits_requested, resp->credits_granted, resp->status, |
| resp->max_readwrite_size, resp->preferred_send_size, |
| resp->max_receive_size, resp->max_fragmented_size); |
| } |
| |
| /* |
| * Process a negotiation response message, according to [MS-SMBD]3.1.5.7 |
| * response, packet_length: the negotiation response message |
| * return value: true if negotiation is a success, false if failed |
| */ |
| static bool process_negotiation_response( |
| struct smbd_response *response, int packet_length) |
| { |
| struct smbd_connection *info = response->info; |
| struct smbd_negotiate_resp *packet = smbd_response_payload(response); |
| |
| if (packet_length < sizeof(struct smbd_negotiate_resp)) { |
| log_rdma_event(ERR, |
| "error: packet_length=%d\n", packet_length); |
| return false; |
| } |
| |
| if (le16_to_cpu(packet->negotiated_version) != SMBD_V1) { |
| log_rdma_event(ERR, "error: negotiated_version=%x\n", |
| le16_to_cpu(packet->negotiated_version)); |
| return false; |
| } |
| info->protocol = le16_to_cpu(packet->negotiated_version); |
| |
| if (packet->credits_requested == 0) { |
| log_rdma_event(ERR, "error: credits_requested==0\n"); |
| return false; |
| } |
| info->receive_credit_target = le16_to_cpu(packet->credits_requested); |
| |
| if (packet->credits_granted == 0) { |
| log_rdma_event(ERR, "error: credits_granted==0\n"); |
| return false; |
| } |
| atomic_set(&info->send_credits, le16_to_cpu(packet->credits_granted)); |
| |
| atomic_set(&info->receive_credits, 0); |
| |
| if (le32_to_cpu(packet->preferred_send_size) > info->max_receive_size) { |
| log_rdma_event(ERR, "error: preferred_send_size=%d\n", |
| le32_to_cpu(packet->preferred_send_size)); |
| return false; |
| } |
| info->max_receive_size = le32_to_cpu(packet->preferred_send_size); |
| |
| if (le32_to_cpu(packet->max_receive_size) < SMBD_MIN_RECEIVE_SIZE) { |
| log_rdma_event(ERR, "error: max_receive_size=%d\n", |
| le32_to_cpu(packet->max_receive_size)); |
| return false; |
| } |
| info->max_send_size = min_t(int, info->max_send_size, |
| le32_to_cpu(packet->max_receive_size)); |
| |
| if (le32_to_cpu(packet->max_fragmented_size) < |
| SMBD_MIN_FRAGMENTED_SIZE) { |
| log_rdma_event(ERR, "error: max_fragmented_size=%d\n", |
| le32_to_cpu(packet->max_fragmented_size)); |
| return false; |
| } |
| info->max_fragmented_send_size = |
| le32_to_cpu(packet->max_fragmented_size); |
| |
| return true; |
| } |
| |
| /* |
| * Check and schedule to send an immediate packet |
| * This is used to extend credtis to remote peer to keep the transport busy |
| */ |
| static void check_and_send_immediate(struct smbd_connection *info) |
| { |
| if (info->transport_status != SMBD_CONNECTED) |
| return; |
| |
| info->send_immediate = true; |
| |
| /* |
| * Promptly send a packet if our peer is running low on receive |
| * credits |
| */ |
| if (atomic_read(&info->receive_credits) < |
| info->receive_credit_target - 1) |
| queue_delayed_work( |
| info->workqueue, &info->send_immediate_work, 0); |
| } |
| |
| static void smbd_post_send_credits(struct work_struct *work) |
| { |
| int ret = 0; |
| int use_receive_queue = 1; |
| int rc; |
| struct smbd_response *response; |
| struct smbd_connection *info = |
| container_of(work, struct smbd_connection, |
| post_send_credits_work); |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| wake_up(&info->wait_receive_queues); |
| return; |
| } |
| |
| if (info->receive_credit_target > |
| atomic_read(&info->receive_credits)) { |
| while (true) { |
| if (use_receive_queue) |
| response = get_receive_buffer(info); |
| else |
| response = get_empty_queue_buffer(info); |
| if (!response) { |
| /* now switch to emtpy packet queue */ |
| if (use_receive_queue) { |
| use_receive_queue = 0; |
| continue; |
| } else |
| break; |
| } |
| |
| response->type = SMBD_TRANSFER_DATA; |
| response->first_segment = false; |
| rc = smbd_post_recv(info, response); |
| if (rc) { |
| log_rdma_recv(ERR, |
| "post_recv failed rc=%d\n", rc); |
| put_receive_buffer(info, response); |
| break; |
| } |
| |
| ret++; |
| } |
| } |
| |
| spin_lock(&info->lock_new_credits_offered); |
| info->new_credits_offered += ret; |
| spin_unlock(&info->lock_new_credits_offered); |
| |
| atomic_add(ret, &info->receive_credits); |
| |
| /* Check if we can post new receive and grant credits to peer */ |
| check_and_send_immediate(info); |
| } |
| |
| static void smbd_recv_done_work(struct work_struct *work) |
| { |
| struct smbd_connection *info = |
| container_of(work, struct smbd_connection, recv_done_work); |
| |
| /* |
| * We may have new send credits granted from remote peer |
| * If any sender is blcoked on lack of credets, unblock it |
| */ |
| if (atomic_read(&info->send_credits)) |
| wake_up_interruptible(&info->wait_send_queue); |
| |
| /* |
| * Check if we need to send something to remote peer to |
| * grant more credits or respond to KEEP_ALIVE packet |
| */ |
| check_and_send_immediate(info); |
| } |
| |
| /* Called from softirq, when recv is done */ |
| static void recv_done(struct ib_cq *cq, struct ib_wc *wc) |
| { |
| struct smbd_data_transfer *data_transfer; |
| struct smbd_response *response = |
| container_of(wc->wr_cqe, struct smbd_response, cqe); |
| struct smbd_connection *info = response->info; |
| int data_length = 0; |
| |
| log_rdma_recv(INFO, "response=%p type=%d wc status=%d wc opcode %d " |
| "byte_len=%d pkey_index=%x\n", |
| response, response->type, wc->status, wc->opcode, |
| wc->byte_len, wc->pkey_index); |
| |
| if (wc->status != IB_WC_SUCCESS || wc->opcode != IB_WC_RECV) { |
| log_rdma_recv(INFO, "wc->status=%d opcode=%d\n", |
| wc->status, wc->opcode); |
| smbd_disconnect_rdma_connection(info); |
| goto error; |
| } |
| |
| ib_dma_sync_single_for_cpu( |
| wc->qp->device, |
| response->sge.addr, |
| response->sge.length, |
| DMA_FROM_DEVICE); |
| |
| switch (response->type) { |
| /* SMBD negotiation response */ |
| case SMBD_NEGOTIATE_RESP: |
| dump_smbd_negotiate_resp(smbd_response_payload(response)); |
| info->full_packet_received = true; |
| info->negotiate_done = |
| process_negotiation_response(response, wc->byte_len); |
| complete(&info->negotiate_completion); |
| break; |
| |
| /* SMBD data transfer packet */ |
| case SMBD_TRANSFER_DATA: |
| data_transfer = smbd_response_payload(response); |
| data_length = le32_to_cpu(data_transfer->data_length); |
| |
| /* |
| * If this is a packet with data playload place the data in |
| * reassembly queue and wake up the reading thread |
| */ |
| if (data_length) { |
| if (info->full_packet_received) |
| response->first_segment = true; |
| |
| if (le32_to_cpu(data_transfer->remaining_data_length)) |
| info->full_packet_received = false; |
| else |
| info->full_packet_received = true; |
| |
| enqueue_reassembly( |
| info, |
| response, |
| data_length); |
| } else |
| put_empty_packet(info, response); |
| |
| if (data_length) |
| wake_up_interruptible(&info->wait_reassembly_queue); |
| |
| atomic_dec(&info->receive_credits); |
| info->receive_credit_target = |
| le16_to_cpu(data_transfer->credits_requested); |
| atomic_add(le16_to_cpu(data_transfer->credits_granted), |
| &info->send_credits); |
| |
| log_incoming(INFO, "data flags %d data_offset %d " |
| "data_length %d remaining_data_length %d\n", |
| le16_to_cpu(data_transfer->flags), |
| le32_to_cpu(data_transfer->data_offset), |
| le32_to_cpu(data_transfer->data_length), |
| le32_to_cpu(data_transfer->remaining_data_length)); |
| |
| /* Send a KEEP_ALIVE response right away if requested */ |
| info->keep_alive_requested = KEEP_ALIVE_NONE; |
| if (le16_to_cpu(data_transfer->flags) & |
| SMB_DIRECT_RESPONSE_REQUESTED) { |
| info->keep_alive_requested = KEEP_ALIVE_PENDING; |
| } |
| |
| queue_work(info->workqueue, &info->recv_done_work); |
| return; |
| |
| default: |
| log_rdma_recv(ERR, |
| "unexpected response type=%d\n", response->type); |
| } |
| |
| error: |
| put_receive_buffer(info, response); |
| } |
| |
| static struct rdma_cm_id *smbd_create_id( |
| struct smbd_connection *info, |
| struct sockaddr *dstaddr, int port) |
| { |
| struct rdma_cm_id *id; |
| int rc; |
| __be16 *sport; |
| |
| id = rdma_create_id(&init_net, smbd_conn_upcall, info, |
| RDMA_PS_TCP, IB_QPT_RC); |
| if (IS_ERR(id)) { |
| rc = PTR_ERR(id); |
| log_rdma_event(ERR, "rdma_create_id() failed %i\n", rc); |
| return id; |
| } |
| |
| if (dstaddr->sa_family == AF_INET6) |
| sport = &((struct sockaddr_in6 *)dstaddr)->sin6_port; |
| else |
| sport = &((struct sockaddr_in *)dstaddr)->sin_port; |
| |
| *sport = htons(port); |
| |
| init_completion(&info->ri_done); |
| info->ri_rc = -ETIMEDOUT; |
| |
| rc = rdma_resolve_addr(id, NULL, (struct sockaddr *)dstaddr, |
| RDMA_RESOLVE_TIMEOUT); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_addr() failed %i\n", rc); |
| goto out; |
| } |
| wait_for_completion_interruptible_timeout( |
| &info->ri_done, msecs_to_jiffies(RDMA_RESOLVE_TIMEOUT)); |
| rc = info->ri_rc; |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_addr() completed %i\n", rc); |
| goto out; |
| } |
| |
| info->ri_rc = -ETIMEDOUT; |
| rc = rdma_resolve_route(id, RDMA_RESOLVE_TIMEOUT); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_route() failed %i\n", rc); |
| goto out; |
| } |
| wait_for_completion_interruptible_timeout( |
| &info->ri_done, msecs_to_jiffies(RDMA_RESOLVE_TIMEOUT)); |
| rc = info->ri_rc; |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_route() completed %i\n", rc); |
| goto out; |
| } |
| |
| return id; |
| |
| out: |
| rdma_destroy_id(id); |
| return ERR_PTR(rc); |
| } |
| |
| /* |
| * Test if FRWR (Fast Registration Work Requests) is supported on the device |
| * This implementation requries FRWR on RDMA read/write |
| * return value: true if it is supported |
| */ |
| static bool frwr_is_supported(struct ib_device_attr *attrs) |
| { |
| if (!(attrs->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS)) |
| return false; |
| if (attrs->max_fast_reg_page_list_len == 0) |
| return false; |
| return true; |
| } |
| |
| static int smbd_ia_open( |
| struct smbd_connection *info, |
| struct sockaddr *dstaddr, int port) |
| { |
| int rc; |
| |
| info->id = smbd_create_id(info, dstaddr, port); |
| if (IS_ERR(info->id)) { |
| rc = PTR_ERR(info->id); |
| goto out1; |
| } |
| |
| if (!frwr_is_supported(&info->id->device->attrs)) { |
| log_rdma_event(ERR, |
| "Fast Registration Work Requests " |
| "(FRWR) is not supported\n"); |
| log_rdma_event(ERR, |
| "Device capability flags = %llx " |
| "max_fast_reg_page_list_len = %u\n", |
| info->id->device->attrs.device_cap_flags, |
| info->id->device->attrs.max_fast_reg_page_list_len); |
| rc = -EPROTONOSUPPORT; |
| goto out2; |
| } |
| |
| info->pd = ib_alloc_pd(info->id->device, 0); |
| if (IS_ERR(info->pd)) { |
| rc = PTR_ERR(info->pd); |
| log_rdma_event(ERR, "ib_alloc_pd() returned %d\n", rc); |
| goto out2; |
| } |
| |
| return 0; |
| |
| out2: |
| rdma_destroy_id(info->id); |
| info->id = NULL; |
| |
| out1: |
| return rc; |
| } |
| |
| /* |
| * Send a negotiation request message to the peer |
| * The negotiation procedure is in [MS-SMBD] 3.1.5.2 and 3.1.5.3 |
| * After negotiation, the transport is connected and ready for |
| * carrying upper layer SMB payload |
| */ |
| static int smbd_post_send_negotiate_req(struct smbd_connection *info) |
| { |
| struct ib_send_wr send_wr, *send_wr_fail; |
| int rc = -ENOMEM; |
| struct smbd_request *request; |
| struct smbd_negotiate_req *packet; |
| |
| request = mempool_alloc(info->request_mempool, GFP_KERNEL); |
| if (!request) |
| return rc; |
| |
| request->info = info; |
| |
| packet = smbd_request_payload(request); |
| packet->min_version = cpu_to_le16(SMBD_V1); |
| packet->max_version = cpu_to_le16(SMBD_V1); |
| packet->reserved = 0; |
| packet->credits_requested = cpu_to_le16(info->send_credit_target); |
| packet->preferred_send_size = cpu_to_le32(info->max_send_size); |
| packet->max_receive_size = cpu_to_le32(info->max_receive_size); |
| packet->max_fragmented_size = |
| cpu_to_le32(info->max_fragmented_recv_size); |
| |
| request->num_sge = 1; |
| request->sge[0].addr = ib_dma_map_single( |
| info->id->device, (void *)packet, |
| sizeof(*packet), DMA_TO_DEVICE); |
| if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) { |
| rc = -EIO; |
| goto dma_mapping_failed; |
| } |
| |
| request->sge[0].length = sizeof(*packet); |
| request->sge[0].lkey = info->pd->local_dma_lkey; |
| |
| ib_dma_sync_single_for_device( |
| info->id->device, request->sge[0].addr, |
| request->sge[0].length, DMA_TO_DEVICE); |
| |
| request->cqe.done = send_done; |
| |
| send_wr.next = NULL; |
| send_wr.wr_cqe = &request->cqe; |
| send_wr.sg_list = request->sge; |
| send_wr.num_sge = request->num_sge; |
| send_wr.opcode = IB_WR_SEND; |
| send_wr.send_flags = IB_SEND_SIGNALED; |
| |
| log_rdma_send(INFO, "sge addr=%llx length=%x lkey=%x\n", |
| request->sge[0].addr, |
| request->sge[0].length, request->sge[0].lkey); |
| |
| request->has_payload = false; |
| atomic_inc(&info->send_pending); |
| rc = ib_post_send(info->id->qp, &send_wr, &send_wr_fail); |
| if (!rc) |
| return 0; |
| |
| /* if we reach here, post send failed */ |
| log_rdma_send(ERR, "ib_post_send failed rc=%d\n", rc); |
| atomic_dec(&info->send_pending); |
| ib_dma_unmap_single(info->id->device, request->sge[0].addr, |
| request->sge[0].length, DMA_TO_DEVICE); |
| |
| dma_mapping_failed: |
| mempool_free(request, info->request_mempool); |
| return rc; |
| } |
| |
| /* |
| * Extend the credits to remote peer |
| * This implements [MS-SMBD] 3.1.5.9 |
| * The idea is that we should extend credits to remote peer as quickly as |
| * it's allowed, to maintain data flow. We allocate as much receive |
| * buffer as possible, and extend the receive credits to remote peer |
| * return value: the new credtis being granted. |
| */ |
| static int manage_credits_prior_sending(struct smbd_connection *info) |
| { |
| int new_credits; |
| |
| spin_lock(&info->lock_new_credits_offered); |
| new_credits = info->new_credits_offered; |
| info->new_credits_offered = 0; |
| spin_unlock(&info->lock_new_credits_offered); |
| |
| return new_credits; |
| } |
| |
| /* |
| * Check if we need to send a KEEP_ALIVE message |
| * The idle connection timer triggers a KEEP_ALIVE message when expires |
| * SMB_DIRECT_RESPONSE_REQUESTED is set in the message flag to have peer send |
| * back a response. |
| * return value: |
| * 1 if SMB_DIRECT_RESPONSE_REQUESTED needs to be set |
| * 0: otherwise |
| */ |
| static int manage_keep_alive_before_sending(struct smbd_connection *info) |
| { |
| if (info->keep_alive_requested == KEEP_ALIVE_PENDING) { |
| info->keep_alive_requested = KEEP_ALIVE_SENT; |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Build and prepare the SMBD packet header |
| * This function waits for avaialbe send credits and build a SMBD packet |
| * header. The caller then optional append payload to the packet after |
| * the header |
| * intput values |
| * size: the size of the payload |
| * remaining_data_length: remaining data to send if this is part of a |
| * fragmented packet |
| * output values |
| * request_out: the request allocated from this function |
| * return values: 0 on success, otherwise actual error code returned |
| */ |
| static int smbd_create_header(struct smbd_connection *info, |
| int size, int remaining_data_length, |
| struct smbd_request **request_out) |
| { |
| struct smbd_request *request; |
| struct smbd_data_transfer *packet; |
| int header_length; |
| int rc; |
| |
| /* Wait for send credits. A SMBD packet needs one credit */ |
| rc = wait_event_interruptible(info->wait_send_queue, |
| atomic_read(&info->send_credits) > 0 || |
| info->transport_status != SMBD_CONNECTED); |
| if (rc) |
| return rc; |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_outgoing(ERR, "disconnected not sending\n"); |
| return -ENOENT; |
| } |
| atomic_dec(&info->send_credits); |
| |
| request = mempool_alloc(info->request_mempool, GFP_KERNEL); |
| if (!request) { |
| rc = -ENOMEM; |
| goto err; |
| } |
| |
| request->info = info; |
| |
| /* Fill in the packet header */ |
| packet = smbd_request_payload(request); |
| packet->credits_requested = cpu_to_le16(info->send_credit_target); |
| packet->credits_granted = |
| cpu_to_le16(manage_credits_prior_sending(info)); |
| info->send_immediate = false; |
| |
| packet->flags = 0; |
| if (manage_keep_alive_before_sending(info)) |
| packet->flags |= cpu_to_le16(SMB_DIRECT_RESPONSE_REQUESTED); |
| |
| packet->reserved = 0; |
| if (!size) |
| packet->data_offset = 0; |
| else |
| packet->data_offset = cpu_to_le32(24); |
| packet->data_length = cpu_to_le32(size); |
| packet->remaining_data_length = cpu_to_le32(remaining_data_length); |
| packet->padding = 0; |
| |
| log_outgoing(INFO, "credits_requested=%d credits_granted=%d " |
| "data_offset=%d data_length=%d remaining_data_length=%d\n", |
| le16_to_cpu(packet->credits_requested), |
| le16_to_cpu(packet->credits_granted), |
| le32_to_cpu(packet->data_offset), |
| le32_to_cpu(packet->data_length), |
| le32_to_cpu(packet->remaining_data_length)); |
| |
| /* Map the packet to DMA */ |
| header_length = sizeof(struct smbd_data_transfer); |
| /* If this is a packet without payload, don't send padding */ |
| if (!size) |
| header_length = offsetof(struct smbd_data_transfer, padding); |
| |
| request->num_sge = 1; |
| request->sge[0].addr = ib_dma_map_single(info->id->device, |
| (void *)packet, |
| header_length, |
| DMA_BIDIRECTIONAL); |
| if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) { |
| mempool_free(request, info->request_mempool); |
| rc = -EIO; |
| goto err; |
| } |
| |
| request->sge[0].length = header_length; |
| request->sge[0].lkey = info->pd->local_dma_lkey; |
| |
| *request_out = request; |
| return 0; |
| |
| err: |
| atomic_inc(&info->send_credits); |
| return rc; |
| } |
| |
| static void smbd_destroy_header(struct smbd_connection *info, |
| struct smbd_request *request) |
| { |
| |
| ib_dma_unmap_single(info->id->device, |
| request->sge[0].addr, |
| request->sge[0].length, |
| DMA_TO_DEVICE); |
| mempool_free(request, info->request_mempool); |
| atomic_inc(&info->send_credits); |
| } |
| |
| /* Post the send request */ |
| static int smbd_post_send(struct smbd_connection *info, |
| struct smbd_request *request, bool has_payload) |
| { |
| struct ib_send_wr send_wr, *send_wr_fail; |
| int rc, i; |
| |
| for (i = 0; i < request->num_sge; i++) { |
| log_rdma_send(INFO, |
| "rdma_request sge[%d] addr=%llu legnth=%u\n", |
| i, request->sge[0].addr, request->sge[0].length); |
| ib_dma_sync_single_for_device( |
| info->id->device, |
| request->sge[i].addr, |
| request->sge[i].length, |
| DMA_TO_DEVICE); |
| } |
| |
| request->cqe.done = send_done; |
| |
| send_wr.next = NULL; |
| send_wr.wr_cqe = &request->cqe; |
| send_wr.sg_list = request->sge; |
| send_wr.num_sge = request->num_sge; |
| send_wr.opcode = IB_WR_SEND; |
| send_wr.send_flags = IB_SEND_SIGNALED; |
| |
| if (has_payload) { |
| request->has_payload = true; |
| atomic_inc(&info->send_payload_pending); |
| } else { |
| request->has_payload = false; |
| atomic_inc(&info->send_pending); |
| } |
| |
| rc = ib_post_send(info->id->qp, &send_wr, &send_wr_fail); |
| if (rc) { |
| log_rdma_send(ERR, "ib_post_send failed rc=%d\n", rc); |
| if (has_payload) { |
| if (atomic_dec_and_test(&info->send_payload_pending)) |
| wake_up(&info->wait_send_payload_pending); |
| } else { |
| if (atomic_dec_and_test(&info->send_pending)) |
| wake_up(&info->wait_send_pending); |
| } |
| } else |
| /* Reset timer for idle connection after packet is sent */ |
| mod_delayed_work(info->workqueue, &info->idle_timer_work, |
| info->keep_alive_interval*HZ); |
| |
| return rc; |
| } |
| |
| static int smbd_post_send_sgl(struct smbd_connection *info, |
| struct scatterlist *sgl, int data_length, int remaining_data_length) |
| { |
| int num_sgs; |
| int i, rc; |
| struct smbd_request *request; |
| struct scatterlist *sg; |
| |
| rc = smbd_create_header( |
| info, data_length, remaining_data_length, &request); |
| if (rc) |
| return rc; |
| |
| num_sgs = sgl ? sg_nents(sgl) : 0; |
| for_each_sg(sgl, sg, num_sgs, i) { |
| request->sge[i+1].addr = |
| ib_dma_map_page(info->id->device, sg_page(sg), |
| sg->offset, sg->length, DMA_BIDIRECTIONAL); |
| if (ib_dma_mapping_error( |
| info->id->device, request->sge[i+1].addr)) { |
| rc = -EIO; |
| request->sge[i+1].addr = 0; |
| goto dma_mapping_failure; |
| } |
| request->sge[i+1].length = sg->length; |
| request->sge[i+1].lkey = info->pd->local_dma_lkey; |
| request->num_sge++; |
| } |
| |
| rc = smbd_post_send(info, request, data_length); |
| if (!rc) |
| return 0; |
| |
| dma_mapping_failure: |
| for (i = 1; i < request->num_sge; i++) |
| if (request->sge[i].addr) |
| ib_dma_unmap_single(info->id->device, |
| request->sge[i].addr, |
| request->sge[i].length, |
| DMA_TO_DEVICE); |
| smbd_destroy_header(info, request); |
| return rc; |
| } |
| |
| /* |
| * Send an empty message |
| * Empty message is used to extend credits to peer to for keep live |
| * while there is no upper layer payload to send at the time |
| */ |
| static int smbd_post_send_empty(struct smbd_connection *info) |
| { |
| info->count_send_empty++; |
| return smbd_post_send_sgl(info, NULL, 0, 0); |
| } |
| |
| /* |
| * Post a receive request to the transport |
| * The remote peer can only send data when a receive request is posted |
| * The interaction is controlled by send/receive credit system |
| */ |
| static int smbd_post_recv( |
| struct smbd_connection *info, struct smbd_response *response) |
| { |
| struct ib_recv_wr recv_wr, *recv_wr_fail = NULL; |
| int rc = -EIO; |
| |
| response->sge.addr = ib_dma_map_single( |
| info->id->device, response->packet, |
| info->max_receive_size, DMA_FROM_DEVICE); |
| if (ib_dma_mapping_error(info->id->device, response->sge.addr)) |
| return rc; |
| |
| response->sge.length = info->max_receive_size; |
| response->sge.lkey = info->pd->local_dma_lkey; |
| |
| response->cqe.done = recv_done; |
| |
| recv_wr.wr_cqe = &response->cqe; |
| recv_wr.next = NULL; |
| recv_wr.sg_list = &response->sge; |
| recv_wr.num_sge = 1; |
| |
| rc = ib_post_recv(info->id->qp, &recv_wr, &recv_wr_fail); |
| if (rc) { |
| ib_dma_unmap_single(info->id->device, response->sge.addr, |
| response->sge.length, DMA_FROM_DEVICE); |
| |
| log_rdma_recv(ERR, "ib_post_recv failed rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| /* Perform SMBD negotiate according to [MS-SMBD] 3.1.5.2 */ |
| static int smbd_negotiate(struct smbd_connection *info) |
| { |
| int rc; |
| struct smbd_response *response = get_receive_buffer(info); |
| |
| response->type = SMBD_NEGOTIATE_RESP; |
| rc = smbd_post_recv(info, response); |
| log_rdma_event(INFO, |
| "smbd_post_recv rc=%d iov.addr=%llx iov.length=%x " |
| "iov.lkey=%x\n", |
| rc, response->sge.addr, |
| response->sge.length, response->sge.lkey); |
| if (rc) |
| return rc; |
| |
| init_completion(&info->negotiate_completion); |
| info->negotiate_done = false; |
| rc = smbd_post_send_negotiate_req(info); |
| if (rc) |
| return rc; |
| |
| rc = wait_for_completion_interruptible_timeout( |
| &info->negotiate_completion, SMBD_NEGOTIATE_TIMEOUT * HZ); |
| log_rdma_event(INFO, "wait_for_completion_timeout rc=%d\n", rc); |
| |
| if (info->negotiate_done) |
| return 0; |
| |
| if (rc == 0) |
| rc = -ETIMEDOUT; |
| else if (rc == -ERESTARTSYS) |
| rc = -EINTR; |
| else |
| rc = -ENOTCONN; |
| |
| return rc; |
| } |
| |
| static void put_empty_packet( |
| struct smbd_connection *info, struct smbd_response *response) |
| { |
| spin_lock(&info->empty_packet_queue_lock); |
| list_add_tail(&response->list, &info->empty_packet_queue); |
| info->count_empty_packet_queue++; |
| spin_unlock(&info->empty_packet_queue_lock); |
| |
| queue_work(info->workqueue, &info->post_send_credits_work); |
| } |
| |
| /* |
| * Implement Connection.FragmentReassemblyBuffer defined in [MS-SMBD] 3.1.1.1 |
| * This is a queue for reassembling upper layer payload and present to upper |
| * layer. All the inncoming payload go to the reassembly queue, regardless of |
| * if reassembly is required. The uuper layer code reads from the queue for all |
| * incoming payloads. |
| * Put a received packet to the reassembly queue |
| * response: the packet received |
| * data_length: the size of payload in this packet |
| */ |
| static void enqueue_reassembly( |
| struct smbd_connection *info, |
| struct smbd_response *response, |
| int data_length) |
| { |
| spin_lock(&info->reassembly_queue_lock); |
| list_add_tail(&response->list, &info->reassembly_queue); |
| info->reassembly_queue_length++; |
| /* |
| * Make sure reassembly_data_length is updated after list and |
| * reassembly_queue_length are updated. On the dequeue side |
| * reassembly_data_length is checked without a lock to determine |
| * if reassembly_queue_length and list is up to date |
| */ |
| virt_wmb(); |
| info->reassembly_data_length += data_length; |
| spin_unlock(&info->reassembly_queue_lock); |
| info->count_reassembly_queue++; |
| info->count_enqueue_reassembly_queue++; |
| } |
| |
| /* |
| * Get the first entry at the front of reassembly queue |
| * Caller is responsible for locking |
| * return value: the first entry if any, NULL if queue is empty |
| */ |
| static struct smbd_response *_get_first_reassembly(struct smbd_connection *info) |
| { |
| struct smbd_response *ret = NULL; |
| |
| if (!list_empty(&info->reassembly_queue)) { |
| ret = list_first_entry( |
| &info->reassembly_queue, |
| struct smbd_response, list); |
| } |
| return ret; |
| } |
| |
| static struct smbd_response *get_empty_queue_buffer( |
| struct smbd_connection *info) |
| { |
| struct smbd_response *ret = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&info->empty_packet_queue_lock, flags); |
| if (!list_empty(&info->empty_packet_queue)) { |
| ret = list_first_entry( |
| &info->empty_packet_queue, |
| struct smbd_response, list); |
| list_del(&ret->list); |
| info->count_empty_packet_queue--; |
| } |
| spin_unlock_irqrestore(&info->empty_packet_queue_lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * Get a receive buffer |
| * For each remote send, we need to post a receive. The receive buffers are |
| * pre-allocated in advance. |
| * return value: the receive buffer, NULL if none is available |
| */ |
| static struct smbd_response *get_receive_buffer(struct smbd_connection *info) |
| { |
| struct smbd_response *ret = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&info->receive_queue_lock, flags); |
| if (!list_empty(&info->receive_queue)) { |
| ret = list_first_entry( |
| &info->receive_queue, |
| struct smbd_response, list); |
| list_del(&ret->list); |
| info->count_receive_queue--; |
| info->count_get_receive_buffer++; |
| } |
| spin_unlock_irqrestore(&info->receive_queue_lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * Return a receive buffer |
| * Upon returning of a receive buffer, we can post new receive and extend |
| * more receive credits to remote peer. This is done immediately after a |
| * receive buffer is returned. |
| */ |
| static void put_receive_buffer( |
| struct smbd_connection *info, struct smbd_response *response) |
| { |
| unsigned long flags; |
| |
| ib_dma_unmap_single(info->id->device, response->sge.addr, |
| response->sge.length, DMA_FROM_DEVICE); |
| |
| spin_lock_irqsave(&info->receive_queue_lock, flags); |
| list_add_tail(&response->list, &info->receive_queue); |
| info->count_receive_queue++; |
| info->count_put_receive_buffer++; |
| spin_unlock_irqrestore(&info->receive_queue_lock, flags); |
| |
| queue_work(info->workqueue, &info->post_send_credits_work); |
| } |
| |
| /* Preallocate all receive buffer on transport establishment */ |
| static int allocate_receive_buffers(struct smbd_connection *info, int num_buf) |
| { |
| int i; |
| struct smbd_response *response; |
| |
| INIT_LIST_HEAD(&info->reassembly_queue); |
| spin_lock_init(&info->reassembly_queue_lock); |
| info->reassembly_data_length = 0; |
| info->reassembly_queue_length = 0; |
| |
| INIT_LIST_HEAD(&info->receive_queue); |
| spin_lock_init(&info->receive_queue_lock); |
| info->count_receive_queue = 0; |
| |
| INIT_LIST_HEAD(&info->empty_packet_queue); |
| spin_lock_init(&info->empty_packet_queue_lock); |
| info->count_empty_packet_queue = 0; |
| |
| init_waitqueue_head(&info->wait_receive_queues); |
| |
| for (i = 0; i < num_buf; i++) { |
| response = mempool_alloc(info->response_mempool, GFP_KERNEL); |
| if (!response) |
| goto allocate_failed; |
| |
| response->info = info; |
| list_add_tail(&response->list, &info->receive_queue); |
| info->count_receive_queue++; |
| } |
| |
| return 0; |
| |
| allocate_failed: |
| while (!list_empty(&info->receive_queue)) { |
| response = list_first_entry( |
| &info->receive_queue, |
| struct smbd_response, list); |
| list_del(&response->list); |
| info->count_receive_queue--; |
| |
| mempool_free(response, info->response_mempool); |
| } |
| return -ENOMEM; |
| } |
| |
| static void destroy_receive_buffers(struct smbd_connection *info) |
| { |
| struct smbd_response *response; |
| |
| while ((response = get_receive_buffer(info))) |
| mempool_free(response, info->response_mempool); |
| |
| while ((response = get_empty_queue_buffer(info))) |
| mempool_free(response, info->response_mempool); |
| } |
| |
| /* |
| * Check and send an immediate or keep alive packet |
| * The condition to send those packets are defined in [MS-SMBD] 3.1.1.1 |
| * Connection.KeepaliveRequested and Connection.SendImmediate |
| * The idea is to extend credits to server as soon as it becomes available |
| */ |
| static void send_immediate_work(struct work_struct *work) |
| { |
| struct smbd_connection *info = container_of( |
| work, struct smbd_connection, |
| send_immediate_work.work); |
| |
| if (info->keep_alive_requested == KEEP_ALIVE_PENDING || |
| info->send_immediate) { |
| log_keep_alive(INFO, "send an empty message\n"); |
| smbd_post_send_empty(info); |
| } |
| } |
| |
| /* Implement idle connection timer [MS-SMBD] 3.1.6.2 */ |
| static void idle_connection_timer(struct work_struct *work) |
| { |
| struct smbd_connection *info = container_of( |
| work, struct smbd_connection, |
| idle_timer_work.work); |
| |
| if (info->keep_alive_requested != KEEP_ALIVE_NONE) { |
| log_keep_alive(ERR, |
| "error status info->keep_alive_requested=%d\n", |
| info->keep_alive_requested); |
| smbd_disconnect_rdma_connection(info); |
| return; |
| } |
| |
| log_keep_alive(INFO, "about to send an empty idle message\n"); |
| smbd_post_send_empty(info); |
| |
| /* Setup the next idle timeout work */ |
| queue_delayed_work(info->workqueue, &info->idle_timer_work, |
| info->keep_alive_interval*HZ); |
| } |
| |
| /* Destroy this SMBD connection, called from upper layer */ |
| void smbd_destroy(struct smbd_connection *info) |
| { |
| log_rdma_event(INFO, "destroying rdma session\n"); |
| |
| /* Kick off the disconnection process */ |
| smbd_disconnect_rdma_connection(info); |
| |
| log_rdma_event(INFO, "wait for transport being destroyed\n"); |
| wait_event(info->wait_destroy, |
| info->transport_status == SMBD_DESTROYED); |
| |
| destroy_workqueue(info->workqueue); |
| kfree(info); |
| } |
| |
| /* |
| * Reconnect this SMBD connection, called from upper layer |
| * return value: 0 on success, or actual error code |
| */ |
| int smbd_reconnect(struct TCP_Server_Info *server) |
| { |
| log_rdma_event(INFO, "reconnecting rdma session\n"); |
| |
| if (!server->smbd_conn) { |
| log_rdma_event(ERR, "rdma session already destroyed\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * This is possible if transport is disconnected and we haven't received |
| * notification from RDMA, but upper layer has detected timeout |
| */ |
| if (server->smbd_conn->transport_status == SMBD_CONNECTED) { |
| log_rdma_event(INFO, "disconnecting transport\n"); |
| smbd_disconnect_rdma_connection(server->smbd_conn); |
| } |
| |
| /* wait until the transport is destroyed */ |
| wait_event(server->smbd_conn->wait_destroy, |
| server->smbd_conn->transport_status == SMBD_DESTROYED); |
| |
| destroy_workqueue(server->smbd_conn->workqueue); |
| kfree(server->smbd_conn); |
| |
| log_rdma_event(INFO, "creating rdma session\n"); |
| server->smbd_conn = smbd_get_connection( |
| server, (struct sockaddr *) &server->dstaddr); |
| |
| return server->smbd_conn ? 0 : -ENOENT; |
| } |
| |
| static void destroy_caches_and_workqueue(struct smbd_connection *info) |
| { |
| destroy_receive_buffers(info); |
| destroy_workqueue(info->workqueue); |
| mempool_destroy(info->response_mempool); |
| kmem_cache_destroy(info->response_cache); |
| mempool_destroy(info->request_mempool); |
| kmem_cache_destroy(info->request_cache); |
| } |
| |
| #define MAX_NAME_LEN 80 |
| static int allocate_caches_and_workqueue(struct smbd_connection *info) |
| { |
| char name[MAX_NAME_LEN]; |
| int rc; |
| |
| snprintf(name, MAX_NAME_LEN, "smbd_request_%p", info); |
| info->request_cache = |
| kmem_cache_create( |
| name, |
| sizeof(struct smbd_request) + |
| sizeof(struct smbd_data_transfer), |
| 0, SLAB_HWCACHE_ALIGN, NULL); |
| if (!info->request_cache) |
| return -ENOMEM; |
| |
| info->request_mempool = |
| mempool_create(info->send_credit_target, mempool_alloc_slab, |
| mempool_free_slab, info->request_cache); |
| if (!info->request_mempool) |
| goto out1; |
| |
| snprintf(name, MAX_NAME_LEN, "smbd_response_%p", info); |
| info->response_cache = |
| kmem_cache_create( |
| name, |
| sizeof(struct smbd_response) + |
| info->max_receive_size, |
| 0, SLAB_HWCACHE_ALIGN, NULL); |
| if (!info->response_cache) |
| goto out2; |
| |
| info->response_mempool = |
| mempool_create(info->receive_credit_max, mempool_alloc_slab, |
| mempool_free_slab, info->response_cache); |
| if (!info->response_mempool) |
| goto out3; |
| |
| snprintf(name, MAX_NAME_LEN, "smbd_%p", info); |
| info->workqueue = create_workqueue(name); |
| if (!info->workqueue) |
| goto out4; |
| |
| rc = allocate_receive_buffers(info, info->receive_credit_max); |
| if (rc) { |
| log_rdma_event(ERR, "failed to allocate receive buffers\n"); |
| goto out5; |
| } |
| |
| return 0; |
| |
| out5: |
| destroy_workqueue(info->workqueue); |
| out4: |
| mempool_destroy(info->response_mempool); |
| out3: |
| kmem_cache_destroy(info->response_cache); |
| out2: |
| mempool_destroy(info->request_mempool); |
| out1: |
| kmem_cache_destroy(info->request_cache); |
| return -ENOMEM; |
| } |
| |
| /* Create a SMBD connection, called by upper layer */ |
| struct smbd_connection *_smbd_get_connection( |
| struct TCP_Server_Info *server, struct sockaddr *dstaddr, int port) |
| { |
| int rc; |
| struct smbd_connection *info; |
| struct rdma_conn_param conn_param; |
| struct ib_qp_init_attr qp_attr; |
| struct sockaddr_in *addr_in = (struct sockaddr_in *) dstaddr; |
| |
| info = kzalloc(sizeof(struct smbd_connection), GFP_KERNEL); |
| if (!info) |
| return NULL; |
| |
| info->transport_status = SMBD_CONNECTING; |
| rc = smbd_ia_open(info, dstaddr, port); |
| if (rc) { |
| log_rdma_event(INFO, "smbd_ia_open rc=%d\n", rc); |
| goto create_id_failed; |
| } |
| |
| if (smbd_send_credit_target > info->id->device->attrs.max_cqe || |
| smbd_send_credit_target > info->id->device->attrs.max_qp_wr) { |
| log_rdma_event(ERR, |
| "consider lowering send_credit_target = %d. " |
| "Possible CQE overrun, device " |
| "reporting max_cpe %d max_qp_wr %d\n", |
| smbd_send_credit_target, |
| info->id->device->attrs.max_cqe, |
| info->id->device->attrs.max_qp_wr); |
| goto config_failed; |
| } |
| |
| if (smbd_receive_credit_max > info->id->device->attrs.max_cqe || |
| smbd_receive_credit_max > info->id->device->attrs.max_qp_wr) { |
| log_rdma_event(ERR, |
| "consider lowering receive_credit_max = %d. " |
| "Possible CQE overrun, device " |
| "reporting max_cpe %d max_qp_wr %d\n", |
| smbd_receive_credit_max, |
| info->id->device->attrs.max_cqe, |
| info->id->device->attrs.max_qp_wr); |
| goto config_failed; |
| } |
| |
| info->receive_credit_max = smbd_receive_credit_max; |
| info->send_credit_target = smbd_send_credit_target; |
| info->max_send_size = smbd_max_send_size; |
| info->max_fragmented_recv_size = smbd_max_fragmented_recv_size; |
| info->max_receive_size = smbd_max_receive_size; |
| info->keep_alive_interval = smbd_keep_alive_interval; |
| |
| if (info->id->device->attrs.max_sge < SMBDIRECT_MAX_SGE) { |
| log_rdma_event(ERR, "warning: device max_sge = %d too small\n", |
| info->id->device->attrs.max_sge); |
| log_rdma_event(ERR, "Queue Pair creation may fail\n"); |
| } |
| |
| info->send_cq = NULL; |
| info->recv_cq = NULL; |
| info->send_cq = ib_alloc_cq(info->id->device, info, |
| info->send_credit_target, 0, IB_POLL_SOFTIRQ); |
| if (IS_ERR(info->send_cq)) { |
| info->send_cq = NULL; |
| goto alloc_cq_failed; |
| } |
| |
| info->recv_cq = ib_alloc_cq(info->id->device, info, |
| info->receive_credit_max, 0, IB_POLL_SOFTIRQ); |
| if (IS_ERR(info->recv_cq)) { |
| info->recv_cq = NULL; |
| goto alloc_cq_failed; |
| } |
| |
| memset(&qp_attr, 0, sizeof(qp_attr)); |
| qp_attr.event_handler = smbd_qp_async_error_upcall; |
| qp_attr.qp_context = info; |
| qp_attr.cap.max_send_wr = info->send_credit_target; |
| qp_attr.cap.max_recv_wr = info->receive_credit_max; |
| qp_attr.cap.max_send_sge = SMBDIRECT_MAX_SGE; |
| qp_attr.cap.max_recv_sge = SMBDIRECT_MAX_SGE; |
| qp_attr.cap.max_inline_data = 0; |
| qp_attr.sq_sig_type = IB_SIGNAL_REQ_WR; |
| qp_attr.qp_type = IB_QPT_RC; |
| qp_attr.send_cq = info->send_cq; |
| qp_attr.recv_cq = info->recv_cq; |
| qp_attr.port_num = ~0; |
| |
| rc = rdma_create_qp(info->id, info->pd, &qp_attr); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_create_qp failed %i\n", rc); |
| goto create_qp_failed; |
| } |
| |
| memset(&conn_param, 0, sizeof(conn_param)); |
| conn_param.initiator_depth = 0; |
| |
| conn_param.retry_count = SMBD_CM_RETRY; |
| conn_param.rnr_retry_count = SMBD_CM_RNR_RETRY; |
| conn_param.flow_control = 0; |
| init_waitqueue_head(&info->wait_destroy); |
| |
| log_rdma_event(INFO, "connecting to IP %pI4 port %d\n", |
| &addr_in->sin_addr, port); |
| |
| init_waitqueue_head(&info->conn_wait); |
| rc = rdma_connect(info->id, &conn_param); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_connect() failed with %i\n", rc); |
| goto rdma_connect_failed; |
| } |
| |
| wait_event_interruptible( |
| info->conn_wait, info->transport_status != SMBD_CONNECTING); |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_rdma_event(ERR, "rdma_connect failed port=%d\n", port); |
| goto rdma_connect_failed; |
| } |
| |
| log_rdma_event(INFO, "rdma_connect connected\n"); |
| |
| rc = allocate_caches_and_workqueue(info); |
| if (rc) { |
| log_rdma_event(ERR, "cache allocation failed\n"); |
| goto allocate_cache_failed; |
| } |
| |
| init_waitqueue_head(&info->wait_send_queue); |
| init_waitqueue_head(&info->wait_reassembly_queue); |
| |
| INIT_DELAYED_WORK(&info->idle_timer_work, idle_connection_timer); |
| INIT_DELAYED_WORK(&info->send_immediate_work, send_immediate_work); |
| queue_delayed_work(info->workqueue, &info->idle_timer_work, |
| info->keep_alive_interval*HZ); |
| |
| init_waitqueue_head(&info->wait_smbd_recv_pending); |
| info->smbd_recv_pending = 0; |
| |
| init_waitqueue_head(&info->wait_send_pending); |
| atomic_set(&info->send_pending, 0); |
| |
| init_waitqueue_head(&info->wait_send_payload_pending); |
| atomic_set(&info->send_payload_pending, 0); |
| |
| INIT_WORK(&info->disconnect_work, smbd_disconnect_rdma_work); |
| INIT_WORK(&info->destroy_work, smbd_destroy_rdma_work); |
| INIT_WORK(&info->recv_done_work, smbd_recv_done_work); |
| INIT_WORK(&info->post_send_credits_work, smbd_post_send_credits); |
| info->new_credits_offered = 0; |
| spin_lock_init(&info->lock_new_credits_offered); |
| |
| rc = smbd_negotiate(info); |
| if (rc) { |
| log_rdma_event(ERR, "smbd_negotiate rc=%d\n", rc); |
| goto negotiation_failed; |
| } |
| |
| return info; |
| |
| negotiation_failed: |
| cancel_delayed_work_sync(&info->idle_timer_work); |
| destroy_caches_and_workqueue(info); |
| info->transport_status = SMBD_NEGOTIATE_FAILED; |
| init_waitqueue_head(&info->conn_wait); |
| rdma_disconnect(info->id); |
| wait_event(info->conn_wait, |
| info->transport_status == SMBD_DISCONNECTED); |
| |
| allocate_cache_failed: |
| rdma_connect_failed: |
| rdma_destroy_qp(info->id); |
| |
| create_qp_failed: |
| alloc_cq_failed: |
| if (info->send_cq) |
| ib_free_cq(info->send_cq); |
| if (info->recv_cq) |
| ib_free_cq(info->recv_cq); |
| |
| config_failed: |
| ib_dealloc_pd(info->pd); |
| rdma_destroy_id(info->id); |
| |
| create_id_failed: |
| kfree(info); |
| return NULL; |
| } |
| |
| struct smbd_connection *smbd_get_connection( |
| struct TCP_Server_Info *server, struct sockaddr *dstaddr) |
| { |
| struct smbd_connection *ret; |
| int port = SMBD_PORT; |
| |
| try_again: |
| ret = _smbd_get_connection(server, dstaddr, port); |
| |
| /* Try SMB_PORT if SMBD_PORT doesn't work */ |
| if (!ret && port == SMBD_PORT) { |
| port = SMB_PORT; |
| goto try_again; |
| } |
| return ret; |
| } |
| |
| /* |
| * Receive data from receive reassembly queue |
| * All the incoming data packets are placed in reassembly queue |
| * buf: the buffer to read data into |
| * size: the length of data to read |
| * return value: actual data read |
| * Note: this implementation copies the data from reassebmly queue to receive |
| * buffers used by upper layer. This is not the optimal code path. A better way |
| * to do it is to not have upper layer allocate its receive buffers but rather |
| * borrow the buffer from reassembly queue, and return it after data is |
| * consumed. But this will require more changes to upper layer code, and also |
| * need to consider packet boundaries while they still being reassembled. |
| */ |
| int smbd_recv_buf(struct smbd_connection *info, char *buf, unsigned int size) |
| { |
| struct smbd_response *response; |
| struct smbd_data_transfer *data_transfer; |
| int to_copy, to_read, data_read, offset; |
| u32 data_length, remaining_data_length, data_offset; |
| int rc; |
| unsigned long flags; |
| |
| again: |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_read(ERR, "disconnected\n"); |
| return -ENODEV; |
| } |
| |
| /* |
| * No need to hold the reassembly queue lock all the time as we are |
| * the only one reading from the front of the queue. The transport |
| * may add more entries to the back of the queue at the same time |
| */ |
| log_read(INFO, "size=%d info->reassembly_data_length=%d\n", size, |
| info->reassembly_data_length); |
| if (info->reassembly_data_length >= size) { |
| int queue_length; |
| int queue_removed = 0; |
| |
| /* |
| * Need to make sure reassembly_data_length is read before |
| * reading reassembly_queue_length and calling |
| * _get_first_reassembly. This call is lock free |
| * as we never read at the end of the queue which are being |
| * updated in SOFTIRQ as more data is received |
| */ |
| virt_rmb(); |
| queue_length = info->reassembly_queue_length; |
| data_read = 0; |
| to_read = size; |
| offset = info->first_entry_offset; |
| while (data_read < size) { |
| response = _get_first_reassembly(info); |
| data_transfer = smbd_response_payload(response); |
| data_length = le32_to_cpu(data_transfer->data_length); |
| remaining_data_length = |
| le32_to_cpu( |
| data_transfer->remaining_data_length); |
| data_offset = le32_to_cpu(data_transfer->data_offset); |
| |
| /* |
| * The upper layer expects RFC1002 length at the |
| * beginning of the payload. Return it to indicate |
| * the total length of the packet. This minimize the |
| * change to upper layer packet processing logic. This |
| * will be eventually remove when an intermediate |
| * transport layer is added |
| */ |
| if (response->first_segment && size == 4) { |
| unsigned int rfc1002_len = |
| data_length + remaining_data_length; |
| *((__be32 *)buf) = cpu_to_be32(rfc1002_len); |
| data_read = 4; |
| response->first_segment = false; |
| log_read(INFO, "returning rfc1002 length %d\n", |
| rfc1002_len); |
| goto read_rfc1002_done; |
| } |
| |
| to_copy = min_t(int, data_length - offset, to_read); |
| memcpy( |
| buf + data_read, |
| (char *)data_transfer + data_offset + offset, |
| to_copy); |
| |
| /* move on to the next buffer? */ |
| if (to_copy == data_length - offset) { |
| queue_length--; |
| /* |
| * No need to lock if we are not at the |
| * end of the queue |
| */ |
| if (!queue_length) |
| spin_lock_irqsave( |
| &info->reassembly_queue_lock, |
| flags); |
| list_del(&response->list); |
| queue_removed++; |
| if (!queue_length) |
| spin_unlock_irqrestore( |
| &info->reassembly_queue_lock, |
| flags); |
| |
| info->count_reassembly_queue--; |
| info->count_dequeue_reassembly_queue++; |
| put_receive_buffer(info, response); |
| offset = 0; |
| log_read(INFO, "put_receive_buffer offset=0\n"); |
| } else |
| offset += to_copy; |
| |
| to_read -= to_copy; |
| data_read += to_copy; |
| |
| log_read(INFO, "_get_first_reassembly memcpy %d bytes " |
| "data_transfer_length-offset=%d after that " |
| "to_read=%d data_read=%d offset=%d\n", |
| to_copy, data_length - offset, |
| to_read, data_read, offset); |
| } |
| |
| spin_lock_irqsave(&info->reassembly_queue_lock, flags); |
| info->reassembly_data_length -= data_read; |
| info->reassembly_queue_length -= queue_removed; |
| spin_unlock_irqrestore(&info->reassembly_queue_lock, flags); |
| |
| info->first_entry_offset = offset; |
| log_read(INFO, "returning to thread data_read=%d " |
| "reassembly_data_length=%d first_entry_offset=%d\n", |
| data_read, info->reassembly_data_length, |
| info->first_entry_offset); |
| read_rfc1002_done: |
| return data_read; |
| } |
| |
| log_read(INFO, "wait_event on more data\n"); |
| rc = wait_event_interruptible( |
| info->wait_reassembly_queue, |
| info->reassembly_data_length >= size || |
| info->transport_status != SMBD_CONNECTED); |
| /* Don't return any data if interrupted */ |
| if (rc) |
| return -ENODEV; |
| |
| goto again; |
| } |
| |
| /* |
| * Receive a page from receive reassembly queue |
| * page: the page to read data into |
| * to_read: the length of data to read |
| * return value: actual data read |
| */ |
| int smbd_recv_page(struct smbd_connection *info, |
| struct page *page, unsigned int to_read) |
| { |
| int ret; |
| char *to_address; |
| |
| /* make sure we have the page ready for read */ |
| ret = wait_event_interruptible( |
| info->wait_reassembly_queue, |
| info->reassembly_data_length >= to_read || |
| info->transport_status != SMBD_CONNECTED); |
| if (ret) |
| return 0; |
| |
| /* now we can read from reassembly queue and not sleep */ |
| to_address = kmap_atomic(page); |
| |
| log_read(INFO, "reading from page=%p address=%p to_read=%d\n", |
| page, to_address, to_read); |
| |
| ret = smbd_recv_buf(info, to_address, to_read); |
| kunmap_atomic(to_address); |
| |
| return ret; |
| } |
| |
| /* |
| * Receive data from transport |
| * msg: a msghdr point to the buffer, can be ITER_KVEC or ITER_BVEC |
| * return: total bytes read, or 0. SMB Direct will not do partial read. |
| */ |
| int smbd_recv(struct smbd_connection *info, struct msghdr *msg) |
| { |
| char *buf; |
| struct page *page; |
| unsigned int to_read; |
| int rc; |
| |
| info->smbd_recv_pending++; |
| |
| switch (msg->msg_iter.type) { |
| case READ | ITER_KVEC: |
| buf = msg->msg_iter.kvec->iov_base; |
| to_read = msg->msg_iter.kvec->iov_len; |
| rc = smbd_recv_buf(info, buf, to_read); |
| break; |
| |
| case READ | ITER_BVEC: |
| page = msg->msg_iter.bvec->bv_page; |
| to_read = msg->msg_iter.bvec->bv_len; |
| rc = smbd_recv_page(info, page, to_read); |
| break; |
| |
| default: |
| /* It's a bug in upper layer to get there */ |
| cifs_dbg(VFS, "CIFS: invalid msg type %d\n", |
| msg->msg_iter.type); |
| rc = -EIO; |
| } |
| |
| info->smbd_recv_pending--; |
| wake_up(&info->wait_smbd_recv_pending); |
| |
| /* SMBDirect will read it all or nothing */ |
| if (rc > 0) |
| msg->msg_iter.count = 0; |
| return rc; |
| } |