| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * fs/crypto/hooks.c |
| * |
| * Encryption hooks for higher-level filesystem operations. |
| */ |
| |
| #include <linux/key.h> |
| |
| #include "fscrypt_private.h" |
| |
| /** |
| * fscrypt_file_open() - prepare to open a possibly-encrypted regular file |
| * @inode: the inode being opened |
| * @filp: the struct file being set up |
| * |
| * Currently, an encrypted regular file can only be opened if its encryption key |
| * is available; access to the raw encrypted contents is not supported. |
| * Therefore, we first set up the inode's encryption key (if not already done) |
| * and return an error if it's unavailable. |
| * |
| * We also verify that if the parent directory (from the path via which the file |
| * is being opened) is encrypted, then the inode being opened uses the same |
| * encryption policy. This is needed as part of the enforcement that all files |
| * in an encrypted directory tree use the same encryption policy, as a |
| * protection against certain types of offline attacks. Note that this check is |
| * needed even when opening an *unencrypted* file, since it's forbidden to have |
| * an unencrypted file in an encrypted directory. |
| * |
| * Return: 0 on success, -ENOKEY if the key is missing, or another -errno code |
| */ |
| int fscrypt_file_open(struct inode *inode, struct file *filp) |
| { |
| int err; |
| struct dentry *dir; |
| |
| err = fscrypt_require_key(inode); |
| if (err) |
| return err; |
| |
| dir = dget_parent(file_dentry(filp)); |
| if (IS_ENCRYPTED(d_inode(dir)) && |
| !fscrypt_has_permitted_context(d_inode(dir), inode)) { |
| fscrypt_warn(inode, |
| "Inconsistent encryption context (parent directory: %lu)", |
| d_inode(dir)->i_ino); |
| err = -EPERM; |
| } |
| dput(dir); |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(fscrypt_file_open); |
| |
| int __fscrypt_prepare_link(struct inode *inode, struct inode *dir, |
| struct dentry *dentry) |
| { |
| int err; |
| |
| err = fscrypt_require_key(dir); |
| if (err) |
| return err; |
| |
| /* ... in case we looked up no-key name before key was added */ |
| if (fscrypt_is_nokey_name(dentry)) |
| return -ENOKEY; |
| |
| if (!fscrypt_has_permitted_context(dir, inode)) |
| return -EXDEV; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(__fscrypt_prepare_link); |
| |
| int __fscrypt_prepare_rename(struct inode *old_dir, struct dentry *old_dentry, |
| struct inode *new_dir, struct dentry *new_dentry, |
| unsigned int flags) |
| { |
| int err; |
| |
| err = fscrypt_require_key(old_dir); |
| if (err) |
| return err; |
| |
| err = fscrypt_require_key(new_dir); |
| if (err) |
| return err; |
| |
| /* ... in case we looked up no-key name(s) before key was added */ |
| if (fscrypt_is_nokey_name(old_dentry) || |
| fscrypt_is_nokey_name(new_dentry)) |
| return -ENOKEY; |
| |
| if (old_dir != new_dir) { |
| if (IS_ENCRYPTED(new_dir) && |
| !fscrypt_has_permitted_context(new_dir, |
| d_inode(old_dentry))) |
| return -EXDEV; |
| |
| if ((flags & RENAME_EXCHANGE) && |
| IS_ENCRYPTED(old_dir) && |
| !fscrypt_has_permitted_context(old_dir, |
| d_inode(new_dentry))) |
| return -EXDEV; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(__fscrypt_prepare_rename); |
| |
| int __fscrypt_prepare_lookup(struct inode *dir, struct dentry *dentry, |
| struct fscrypt_name *fname) |
| { |
| int err = fscrypt_setup_filename(dir, &dentry->d_name, 1, fname); |
| |
| if (err && err != -ENOENT) |
| return err; |
| |
| if (fname->is_nokey_name) { |
| spin_lock(&dentry->d_lock); |
| dentry->d_flags |= DCACHE_NOKEY_NAME; |
| spin_unlock(&dentry->d_lock); |
| d_set_d_op(dentry, &fscrypt_d_ops); |
| } |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(__fscrypt_prepare_lookup); |
| |
| /** |
| * fscrypt_prepare_setflags() - prepare to change flags with FS_IOC_SETFLAGS |
| * @inode: the inode on which flags are being changed |
| * @oldflags: the old flags |
| * @flags: the new flags |
| * |
| * The caller should be holding i_rwsem for write. |
| * |
| * Return: 0 on success; -errno if the flags change isn't allowed or if |
| * another error occurs. |
| */ |
| int fscrypt_prepare_setflags(struct inode *inode, |
| unsigned int oldflags, unsigned int flags) |
| { |
| struct fscrypt_info *ci; |
| struct fscrypt_master_key *mk; |
| int err; |
| |
| /* |
| * When the CASEFOLD flag is set on an encrypted directory, we must |
| * derive the secret key needed for the dirhash. This is only possible |
| * if the directory uses a v2 encryption policy. |
| */ |
| if (IS_ENCRYPTED(inode) && (flags & ~oldflags & FS_CASEFOLD_FL)) { |
| err = fscrypt_require_key(inode); |
| if (err) |
| return err; |
| ci = inode->i_crypt_info; |
| if (ci->ci_policy.version != FSCRYPT_POLICY_V2) |
| return -EINVAL; |
| mk = ci->ci_master_key->payload.data[0]; |
| down_read(&mk->mk_secret_sem); |
| if (is_master_key_secret_present(&mk->mk_secret)) |
| err = fscrypt_derive_dirhash_key(ci, mk); |
| else |
| err = -ENOKEY; |
| up_read(&mk->mk_secret_sem); |
| return err; |
| } |
| return 0; |
| } |
| |
| /** |
| * fscrypt_prepare_symlink() - prepare to create a possibly-encrypted symlink |
| * @dir: directory in which the symlink is being created |
| * @target: plaintext symlink target |
| * @len: length of @target excluding null terminator |
| * @max_len: space the filesystem has available to store the symlink target |
| * @disk_link: (out) the on-disk symlink target being prepared |
| * |
| * This function computes the size the symlink target will require on-disk, |
| * stores it in @disk_link->len, and validates it against @max_len. An |
| * encrypted symlink may be longer than the original. |
| * |
| * Additionally, @disk_link->name is set to @target if the symlink will be |
| * unencrypted, but left NULL if the symlink will be encrypted. For encrypted |
| * symlinks, the filesystem must call fscrypt_encrypt_symlink() to create the |
| * on-disk target later. (The reason for the two-step process is that some |
| * filesystems need to know the size of the symlink target before creating the |
| * inode, e.g. to determine whether it will be a "fast" or "slow" symlink.) |
| * |
| * Return: 0 on success, -ENAMETOOLONG if the symlink target is too long, |
| * -ENOKEY if the encryption key is missing, or another -errno code if a problem |
| * occurred while setting up the encryption key. |
| */ |
| int fscrypt_prepare_symlink(struct inode *dir, const char *target, |
| unsigned int len, unsigned int max_len, |
| struct fscrypt_str *disk_link) |
| { |
| const union fscrypt_policy *policy; |
| |
| /* |
| * To calculate the size of the encrypted symlink target we need to know |
| * the amount of NUL padding, which is determined by the flags set in |
| * the encryption policy which will be inherited from the directory. |
| */ |
| policy = fscrypt_policy_to_inherit(dir); |
| if (policy == NULL) { |
| /* Not encrypted */ |
| disk_link->name = (unsigned char *)target; |
| disk_link->len = len + 1; |
| if (disk_link->len > max_len) |
| return -ENAMETOOLONG; |
| return 0; |
| } |
| if (IS_ERR(policy)) |
| return PTR_ERR(policy); |
| |
| /* |
| * Calculate the size of the encrypted symlink and verify it won't |
| * exceed max_len. Note that for historical reasons, encrypted symlink |
| * targets are prefixed with the ciphertext length, despite this |
| * actually being redundant with i_size. This decreases by 2 bytes the |
| * longest symlink target we can accept. |
| * |
| * We could recover 1 byte by not counting a null terminator, but |
| * counting it (even though it is meaningless for ciphertext) is simpler |
| * for now since filesystems will assume it is there and subtract it. |
| */ |
| if (!fscrypt_fname_encrypted_size(policy, len, |
| max_len - sizeof(struct fscrypt_symlink_data), |
| &disk_link->len)) |
| return -ENAMETOOLONG; |
| disk_link->len += sizeof(struct fscrypt_symlink_data); |
| |
| disk_link->name = NULL; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(fscrypt_prepare_symlink); |
| |
| int __fscrypt_encrypt_symlink(struct inode *inode, const char *target, |
| unsigned int len, struct fscrypt_str *disk_link) |
| { |
| int err; |
| struct qstr iname = QSTR_INIT(target, len); |
| struct fscrypt_symlink_data *sd; |
| unsigned int ciphertext_len; |
| |
| /* |
| * fscrypt_prepare_new_inode() should have already set up the new |
| * symlink inode's encryption key. We don't wait until now to do it, |
| * since we may be in a filesystem transaction now. |
| */ |
| if (WARN_ON_ONCE(!fscrypt_has_encryption_key(inode))) |
| return -ENOKEY; |
| |
| if (disk_link->name) { |
| /* filesystem-provided buffer */ |
| sd = (struct fscrypt_symlink_data *)disk_link->name; |
| } else { |
| sd = kmalloc(disk_link->len, GFP_NOFS); |
| if (!sd) |
| return -ENOMEM; |
| } |
| ciphertext_len = disk_link->len - sizeof(*sd); |
| sd->len = cpu_to_le16(ciphertext_len); |
| |
| err = fscrypt_fname_encrypt(inode, &iname, sd->encrypted_path, |
| ciphertext_len); |
| if (err) |
| goto err_free_sd; |
| |
| /* |
| * Null-terminating the ciphertext doesn't make sense, but we still |
| * count the null terminator in the length, so we might as well |
| * initialize it just in case the filesystem writes it out. |
| */ |
| sd->encrypted_path[ciphertext_len] = '\0'; |
| |
| /* Cache the plaintext symlink target for later use by get_link() */ |
| err = -ENOMEM; |
| inode->i_link = kmemdup(target, len + 1, GFP_NOFS); |
| if (!inode->i_link) |
| goto err_free_sd; |
| |
| if (!disk_link->name) |
| disk_link->name = (unsigned char *)sd; |
| return 0; |
| |
| err_free_sd: |
| if (!disk_link->name) |
| kfree(sd); |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(__fscrypt_encrypt_symlink); |
| |
| /** |
| * fscrypt_get_symlink() - get the target of an encrypted symlink |
| * @inode: the symlink inode |
| * @caddr: the on-disk contents of the symlink |
| * @max_size: size of @caddr buffer |
| * @done: if successful, will be set up to free the returned target if needed |
| * |
| * If the symlink's encryption key is available, we decrypt its target. |
| * Otherwise, we encode its target for presentation. |
| * |
| * This may sleep, so the filesystem must have dropped out of RCU mode already. |
| * |
| * Return: the presentable symlink target or an ERR_PTR() |
| */ |
| const char *fscrypt_get_symlink(struct inode *inode, const void *caddr, |
| unsigned int max_size, |
| struct delayed_call *done) |
| { |
| const struct fscrypt_symlink_data *sd; |
| struct fscrypt_str cstr, pstr; |
| bool has_key; |
| int err; |
| |
| /* This is for encrypted symlinks only */ |
| if (WARN_ON(!IS_ENCRYPTED(inode))) |
| return ERR_PTR(-EINVAL); |
| |
| /* If the decrypted target is already cached, just return it. */ |
| pstr.name = READ_ONCE(inode->i_link); |
| if (pstr.name) |
| return pstr.name; |
| |
| /* |
| * Try to set up the symlink's encryption key, but we can continue |
| * regardless of whether the key is available or not. |
| */ |
| err = fscrypt_get_encryption_info(inode); |
| if (err) |
| return ERR_PTR(err); |
| has_key = fscrypt_has_encryption_key(inode); |
| |
| /* |
| * For historical reasons, encrypted symlink targets are prefixed with |
| * the ciphertext length, even though this is redundant with i_size. |
| */ |
| |
| if (max_size < sizeof(*sd)) |
| return ERR_PTR(-EUCLEAN); |
| sd = caddr; |
| cstr.name = (unsigned char *)sd->encrypted_path; |
| cstr.len = le16_to_cpu(sd->len); |
| |
| if (cstr.len == 0) |
| return ERR_PTR(-EUCLEAN); |
| |
| if (cstr.len + sizeof(*sd) - 1 > max_size) |
| return ERR_PTR(-EUCLEAN); |
| |
| err = fscrypt_fname_alloc_buffer(cstr.len, &pstr); |
| if (err) |
| return ERR_PTR(err); |
| |
| err = fscrypt_fname_disk_to_usr(inode, 0, 0, &cstr, &pstr); |
| if (err) |
| goto err_kfree; |
| |
| err = -EUCLEAN; |
| if (pstr.name[0] == '\0') |
| goto err_kfree; |
| |
| pstr.name[pstr.len] = '\0'; |
| |
| /* |
| * Cache decrypted symlink targets in i_link for later use. Don't cache |
| * symlink targets encoded without the key, since those become outdated |
| * once the key is added. This pairs with the READ_ONCE() above and in |
| * the VFS path lookup code. |
| */ |
| if (!has_key || |
| cmpxchg_release(&inode->i_link, NULL, pstr.name) != NULL) |
| set_delayed_call(done, kfree_link, pstr.name); |
| |
| return pstr.name; |
| |
| err_kfree: |
| kfree(pstr.name); |
| return ERR_PTR(err); |
| } |
| EXPORT_SYMBOL_GPL(fscrypt_get_symlink); |
| |
| /** |
| * fscrypt_symlink_getattr() - set the correct st_size for encrypted symlinks |
| * @path: the path for the encrypted symlink being queried |
| * @stat: the struct being filled with the symlink's attributes |
| * |
| * Override st_size of encrypted symlinks to be the length of the decrypted |
| * symlink target (or the no-key encoded symlink target, if the key is |
| * unavailable) rather than the length of the encrypted symlink target. This is |
| * necessary for st_size to match the symlink target that userspace actually |
| * sees. POSIX requires this, and some userspace programs depend on it. |
| * |
| * This requires reading the symlink target from disk if needed, setting up the |
| * inode's encryption key if possible, and then decrypting or encoding the |
| * symlink target. This makes lstat() more heavyweight than is normally the |
| * case. However, decrypted symlink targets will be cached in ->i_link, so |
| * usually the symlink won't have to be read and decrypted again later if/when |
| * it is actually followed, readlink() is called, or lstat() is called again. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| int fscrypt_symlink_getattr(const struct path *path, struct kstat *stat) |
| { |
| struct dentry *dentry = path->dentry; |
| struct inode *inode = d_inode(dentry); |
| const char *link; |
| DEFINE_DELAYED_CALL(done); |
| |
| /* |
| * To get the symlink target that userspace will see (whether it's the |
| * decrypted target or the no-key encoded target), we can just get it in |
| * the same way the VFS does during path resolution and readlink(). |
| */ |
| link = READ_ONCE(inode->i_link); |
| if (!link) { |
| link = inode->i_op->get_link(dentry, inode, &done); |
| if (IS_ERR(link)) |
| return PTR_ERR(link); |
| } |
| stat->size = strlen(link); |
| do_delayed_call(&done); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(fscrypt_symlink_getattr); |