| /* |
| * Copyright 2012 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: Alex Deucher |
| */ |
| #include <linux/firmware.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include "drmP.h" |
| #include "radeon.h" |
| #include "radeon_asic.h" |
| #include "cikd.h" |
| #include "atom.h" |
| |
| extern void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *save); |
| extern void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save); |
| extern void si_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc); |
| |
| /* |
| * Core functions |
| */ |
| /** |
| * cik_tiling_mode_table_init - init the hw tiling table |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Starting with SI, the tiling setup is done globally in a |
| * set of 32 tiling modes. Rather than selecting each set of |
| * parameters per surface as on older asics, we just select |
| * which index in the tiling table we want to use, and the |
| * surface uses those parameters (CIK). |
| */ |
| static void cik_tiling_mode_table_init(struct radeon_device *rdev) |
| { |
| const u32 num_tile_mode_states = 32; |
| const u32 num_secondary_tile_mode_states = 16; |
| u32 reg_offset, gb_tile_moden, split_equal_to_row_size; |
| u32 num_pipe_configs; |
| u32 num_rbs = rdev->config.cik.max_backends_per_se * |
| rdev->config.cik.max_shader_engines; |
| |
| switch (rdev->config.cik.mem_row_size_in_kb) { |
| case 1: |
| split_equal_to_row_size = ADDR_SURF_TILE_SPLIT_1KB; |
| break; |
| case 2: |
| default: |
| split_equal_to_row_size = ADDR_SURF_TILE_SPLIT_2KB; |
| break; |
| case 4: |
| split_equal_to_row_size = ADDR_SURF_TILE_SPLIT_4KB; |
| break; |
| } |
| |
| num_pipe_configs = rdev->config.cik.max_tile_pipes; |
| if (num_pipe_configs > 8) |
| num_pipe_configs = 8; /* ??? */ |
| |
| if (num_pipe_configs == 8) { |
| for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) { |
| switch (reg_offset) { |
| case 0: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_64B)); |
| break; |
| case 1: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_128B)); |
| break; |
| case 2: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 3: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_512B)); |
| break; |
| case 4: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 5: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING)); |
| break; |
| case 6: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 7: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 8: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_LINEAR_ALIGNED) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16)); |
| break; |
| case 9: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING)); |
| break; |
| case 10: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 11: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 12: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 13: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING)); |
| break; |
| case 14: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 16: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 17: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 27: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING)); |
| break; |
| case 28: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 29: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 30: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P8_32x32_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| default: |
| gb_tile_moden = 0; |
| break; |
| } |
| WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden); |
| } |
| for (reg_offset = 0; reg_offset < num_secondary_tile_mode_states; reg_offset++) { |
| switch (reg_offset) { |
| case 0: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 1: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 2: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 3: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 4: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_8_BANK)); |
| break; |
| case 5: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_4_BANK)); |
| break; |
| case 6: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_2_BANK)); |
| break; |
| case 8: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_8) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 9: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 10: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 11: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 12: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_8_BANK)); |
| break; |
| case 13: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_4_BANK)); |
| break; |
| case 14: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_2_BANK)); |
| break; |
| default: |
| gb_tile_moden = 0; |
| break; |
| } |
| WREG32(GB_MACROTILE_MODE0 + (reg_offset * 4), gb_tile_moden); |
| } |
| } else if (num_pipe_configs == 4) { |
| if (num_rbs == 4) { |
| for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) { |
| switch (reg_offset) { |
| case 0: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_64B)); |
| break; |
| case 1: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_128B)); |
| break; |
| case 2: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 3: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_512B)); |
| break; |
| case 4: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 5: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING)); |
| break; |
| case 6: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 7: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 8: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_LINEAR_ALIGNED) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16)); |
| break; |
| case 9: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING)); |
| break; |
| case 10: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 11: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 12: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 13: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING)); |
| break; |
| case 14: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 16: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 17: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 27: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING)); |
| break; |
| case 28: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 29: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 30: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_16x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| default: |
| gb_tile_moden = 0; |
| break; |
| } |
| WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden); |
| } |
| } else if (num_rbs < 4) { |
| for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) { |
| switch (reg_offset) { |
| case 0: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_64B)); |
| break; |
| case 1: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_128B)); |
| break; |
| case 2: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 3: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_512B)); |
| break; |
| case 4: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 5: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING)); |
| break; |
| case 6: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 7: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 8: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_LINEAR_ALIGNED) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16)); |
| break; |
| case 9: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING)); |
| break; |
| case 10: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 11: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 12: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 13: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING)); |
| break; |
| case 14: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 16: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 17: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 27: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING)); |
| break; |
| case 28: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 29: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 30: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P4_8x16) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| default: |
| gb_tile_moden = 0; |
| break; |
| } |
| WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden); |
| } |
| } |
| for (reg_offset = 0; reg_offset < num_secondary_tile_mode_states; reg_offset++) { |
| switch (reg_offset) { |
| case 0: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 1: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 2: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 3: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 4: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 5: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_8_BANK)); |
| break; |
| case 6: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_4_BANK)); |
| break; |
| case 8: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_2) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_8) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 9: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_2) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 10: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 11: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 12: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 13: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_8_BANK)); |
| break; |
| case 14: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) | |
| NUM_BANKS(ADDR_SURF_4_BANK)); |
| break; |
| default: |
| gb_tile_moden = 0; |
| break; |
| } |
| WREG32(GB_MACROTILE_MODE0 + (reg_offset * 4), gb_tile_moden); |
| } |
| } else if (num_pipe_configs == 2) { |
| for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) { |
| switch (reg_offset) { |
| case 0: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_64B)); |
| break; |
| case 1: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_128B)); |
| break; |
| case 2: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 3: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_512B)); |
| break; |
| case 4: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 5: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING)); |
| break; |
| case 6: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B)); |
| break; |
| case 7: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| TILE_SPLIT(split_equal_to_row_size)); |
| break; |
| case 8: |
| gb_tile_moden = ARRAY_MODE(ARRAY_LINEAR_ALIGNED); |
| break; |
| case 9: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING)); |
| break; |
| case 10: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 11: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 12: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 13: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING)); |
| break; |
| case 14: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 16: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 17: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 27: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING)); |
| break; |
| case 28: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 29: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| case 30: |
| gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_2D_TILED_THIN1) | |
| MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) | |
| PIPE_CONFIG(ADDR_SURF_P2) | |
| SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2)); |
| break; |
| default: |
| gb_tile_moden = 0; |
| break; |
| } |
| WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden); |
| } |
| for (reg_offset = 0; reg_offset < num_secondary_tile_mode_states; reg_offset++) { |
| switch (reg_offset) { |
| case 0: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_2) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 1: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_2) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 2: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 3: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 4: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 5: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 6: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_8_BANK)); |
| break; |
| case 8: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_4) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_8) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 9: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_4) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 10: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_2) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 11: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_2) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 12: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 13: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_4) | |
| NUM_BANKS(ADDR_SURF_16_BANK)); |
| break; |
| case 14: |
| gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) | |
| BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) | |
| MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) | |
| NUM_BANKS(ADDR_SURF_8_BANK)); |
| break; |
| default: |
| gb_tile_moden = 0; |
| break; |
| } |
| WREG32(GB_MACROTILE_MODE0 + (reg_offset * 4), gb_tile_moden); |
| } |
| } else |
| DRM_ERROR("unknown num pipe config: 0x%x\n", num_pipe_configs); |
| } |
| |
| /** |
| * cik_select_se_sh - select which SE, SH to address |
| * |
| * @rdev: radeon_device pointer |
| * @se_num: shader engine to address |
| * @sh_num: sh block to address |
| * |
| * Select which SE, SH combinations to address. Certain |
| * registers are instanced per SE or SH. 0xffffffff means |
| * broadcast to all SEs or SHs (CIK). |
| */ |
| static void cik_select_se_sh(struct radeon_device *rdev, |
| u32 se_num, u32 sh_num) |
| { |
| u32 data = INSTANCE_BROADCAST_WRITES; |
| |
| if ((se_num == 0xffffffff) && (sh_num == 0xffffffff)) |
| data = SH_BROADCAST_WRITES | SE_BROADCAST_WRITES; |
| else if (se_num == 0xffffffff) |
| data |= SE_BROADCAST_WRITES | SH_INDEX(sh_num); |
| else if (sh_num == 0xffffffff) |
| data |= SH_BROADCAST_WRITES | SE_INDEX(se_num); |
| else |
| data |= SH_INDEX(sh_num) | SE_INDEX(se_num); |
| WREG32(GRBM_GFX_INDEX, data); |
| } |
| |
| /** |
| * cik_create_bitmask - create a bitmask |
| * |
| * @bit_width: length of the mask |
| * |
| * create a variable length bit mask (CIK). |
| * Returns the bitmask. |
| */ |
| static u32 cik_create_bitmask(u32 bit_width) |
| { |
| u32 i, mask = 0; |
| |
| for (i = 0; i < bit_width; i++) { |
| mask <<= 1; |
| mask |= 1; |
| } |
| return mask; |
| } |
| |
| /** |
| * cik_select_se_sh - select which SE, SH to address |
| * |
| * @rdev: radeon_device pointer |
| * @max_rb_num: max RBs (render backends) for the asic |
| * @se_num: number of SEs (shader engines) for the asic |
| * @sh_per_se: number of SH blocks per SE for the asic |
| * |
| * Calculates the bitmask of disabled RBs (CIK). |
| * Returns the disabled RB bitmask. |
| */ |
| static u32 cik_get_rb_disabled(struct radeon_device *rdev, |
| u32 max_rb_num, u32 se_num, |
| u32 sh_per_se) |
| { |
| u32 data, mask; |
| |
| data = RREG32(CC_RB_BACKEND_DISABLE); |
| if (data & 1) |
| data &= BACKEND_DISABLE_MASK; |
| else |
| data = 0; |
| data |= RREG32(GC_USER_RB_BACKEND_DISABLE); |
| |
| data >>= BACKEND_DISABLE_SHIFT; |
| |
| mask = cik_create_bitmask(max_rb_num / se_num / sh_per_se); |
| |
| return data & mask; |
| } |
| |
| /** |
| * cik_setup_rb - setup the RBs on the asic |
| * |
| * @rdev: radeon_device pointer |
| * @se_num: number of SEs (shader engines) for the asic |
| * @sh_per_se: number of SH blocks per SE for the asic |
| * @max_rb_num: max RBs (render backends) for the asic |
| * |
| * Configures per-SE/SH RB registers (CIK). |
| */ |
| static void cik_setup_rb(struct radeon_device *rdev, |
| u32 se_num, u32 sh_per_se, |
| u32 max_rb_num) |
| { |
| int i, j; |
| u32 data, mask; |
| u32 disabled_rbs = 0; |
| u32 enabled_rbs = 0; |
| |
| for (i = 0; i < se_num; i++) { |
| for (j = 0; j < sh_per_se; j++) { |
| cik_select_se_sh(rdev, i, j); |
| data = cik_get_rb_disabled(rdev, max_rb_num, se_num, sh_per_se); |
| disabled_rbs |= data << ((i * sh_per_se + j) * CIK_RB_BITMAP_WIDTH_PER_SH); |
| } |
| } |
| cik_select_se_sh(rdev, 0xffffffff, 0xffffffff); |
| |
| mask = 1; |
| for (i = 0; i < max_rb_num; i++) { |
| if (!(disabled_rbs & mask)) |
| enabled_rbs |= mask; |
| mask <<= 1; |
| } |
| |
| for (i = 0; i < se_num; i++) { |
| cik_select_se_sh(rdev, i, 0xffffffff); |
| data = 0; |
| for (j = 0; j < sh_per_se; j++) { |
| switch (enabled_rbs & 3) { |
| case 1: |
| data |= (RASTER_CONFIG_RB_MAP_0 << (i * sh_per_se + j) * 2); |
| break; |
| case 2: |
| data |= (RASTER_CONFIG_RB_MAP_3 << (i * sh_per_se + j) * 2); |
| break; |
| case 3: |
| default: |
| data |= (RASTER_CONFIG_RB_MAP_2 << (i * sh_per_se + j) * 2); |
| break; |
| } |
| enabled_rbs >>= 2; |
| } |
| WREG32(PA_SC_RASTER_CONFIG, data); |
| } |
| cik_select_se_sh(rdev, 0xffffffff, 0xffffffff); |
| } |
| |
| /** |
| * cik_gpu_init - setup the 3D engine |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Configures the 3D engine and tiling configuration |
| * registers so that the 3D engine is usable. |
| */ |
| static void cik_gpu_init(struct radeon_device *rdev) |
| { |
| u32 gb_addr_config = RREG32(GB_ADDR_CONFIG); |
| u32 mc_shared_chmap, mc_arb_ramcfg; |
| u32 hdp_host_path_cntl; |
| u32 tmp; |
| int i, j; |
| |
| switch (rdev->family) { |
| case CHIP_BONAIRE: |
| rdev->config.cik.max_shader_engines = 2; |
| rdev->config.cik.max_tile_pipes = 4; |
| rdev->config.cik.max_cu_per_sh = 7; |
| rdev->config.cik.max_sh_per_se = 1; |
| rdev->config.cik.max_backends_per_se = 2; |
| rdev->config.cik.max_texture_channel_caches = 4; |
| rdev->config.cik.max_gprs = 256; |
| rdev->config.cik.max_gs_threads = 32; |
| rdev->config.cik.max_hw_contexts = 8; |
| |
| rdev->config.cik.sc_prim_fifo_size_frontend = 0x20; |
| rdev->config.cik.sc_prim_fifo_size_backend = 0x100; |
| rdev->config.cik.sc_hiz_tile_fifo_size = 0x30; |
| rdev->config.cik.sc_earlyz_tile_fifo_size = 0x130; |
| gb_addr_config = BONAIRE_GB_ADDR_CONFIG_GOLDEN; |
| break; |
| case CHIP_KAVERI: |
| /* TODO */ |
| break; |
| case CHIP_KABINI: |
| default: |
| rdev->config.cik.max_shader_engines = 1; |
| rdev->config.cik.max_tile_pipes = 2; |
| rdev->config.cik.max_cu_per_sh = 2; |
| rdev->config.cik.max_sh_per_se = 1; |
| rdev->config.cik.max_backends_per_se = 1; |
| rdev->config.cik.max_texture_channel_caches = 2; |
| rdev->config.cik.max_gprs = 256; |
| rdev->config.cik.max_gs_threads = 16; |
| rdev->config.cik.max_hw_contexts = 8; |
| |
| rdev->config.cik.sc_prim_fifo_size_frontend = 0x20; |
| rdev->config.cik.sc_prim_fifo_size_backend = 0x100; |
| rdev->config.cik.sc_hiz_tile_fifo_size = 0x30; |
| rdev->config.cik.sc_earlyz_tile_fifo_size = 0x130; |
| gb_addr_config = BONAIRE_GB_ADDR_CONFIG_GOLDEN; |
| break; |
| } |
| |
| /* Initialize HDP */ |
| for (i = 0, j = 0; i < 32; i++, j += 0x18) { |
| WREG32((0x2c14 + j), 0x00000000); |
| WREG32((0x2c18 + j), 0x00000000); |
| WREG32((0x2c1c + j), 0x00000000); |
| WREG32((0x2c20 + j), 0x00000000); |
| WREG32((0x2c24 + j), 0x00000000); |
| } |
| |
| WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); |
| |
| WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN); |
| |
| mc_shared_chmap = RREG32(MC_SHARED_CHMAP); |
| mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG); |
| |
| rdev->config.cik.num_tile_pipes = rdev->config.cik.max_tile_pipes; |
| rdev->config.cik.mem_max_burst_length_bytes = 256; |
| tmp = (mc_arb_ramcfg & NOOFCOLS_MASK) >> NOOFCOLS_SHIFT; |
| rdev->config.cik.mem_row_size_in_kb = (4 * (1 << (8 + tmp))) / 1024; |
| if (rdev->config.cik.mem_row_size_in_kb > 4) |
| rdev->config.cik.mem_row_size_in_kb = 4; |
| /* XXX use MC settings? */ |
| rdev->config.cik.shader_engine_tile_size = 32; |
| rdev->config.cik.num_gpus = 1; |
| rdev->config.cik.multi_gpu_tile_size = 64; |
| |
| /* fix up row size */ |
| gb_addr_config &= ~ROW_SIZE_MASK; |
| switch (rdev->config.cik.mem_row_size_in_kb) { |
| case 1: |
| default: |
| gb_addr_config |= ROW_SIZE(0); |
| break; |
| case 2: |
| gb_addr_config |= ROW_SIZE(1); |
| break; |
| case 4: |
| gb_addr_config |= ROW_SIZE(2); |
| break; |
| } |
| |
| /* setup tiling info dword. gb_addr_config is not adequate since it does |
| * not have bank info, so create a custom tiling dword. |
| * bits 3:0 num_pipes |
| * bits 7:4 num_banks |
| * bits 11:8 group_size |
| * bits 15:12 row_size |
| */ |
| rdev->config.cik.tile_config = 0; |
| switch (rdev->config.cik.num_tile_pipes) { |
| case 1: |
| rdev->config.cik.tile_config |= (0 << 0); |
| break; |
| case 2: |
| rdev->config.cik.tile_config |= (1 << 0); |
| break; |
| case 4: |
| rdev->config.cik.tile_config |= (2 << 0); |
| break; |
| case 8: |
| default: |
| /* XXX what about 12? */ |
| rdev->config.cik.tile_config |= (3 << 0); |
| break; |
| } |
| if ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) |
| rdev->config.cik.tile_config |= 1 << 4; |
| else |
| rdev->config.cik.tile_config |= 0 << 4; |
| rdev->config.cik.tile_config |= |
| ((gb_addr_config & PIPE_INTERLEAVE_SIZE_MASK) >> PIPE_INTERLEAVE_SIZE_SHIFT) << 8; |
| rdev->config.cik.tile_config |= |
| ((gb_addr_config & ROW_SIZE_MASK) >> ROW_SIZE_SHIFT) << 12; |
| |
| WREG32(GB_ADDR_CONFIG, gb_addr_config); |
| WREG32(HDP_ADDR_CONFIG, gb_addr_config); |
| WREG32(DMIF_ADDR_CALC, gb_addr_config); |
| |
| cik_tiling_mode_table_init(rdev); |
| |
| cik_setup_rb(rdev, rdev->config.cik.max_shader_engines, |
| rdev->config.cik.max_sh_per_se, |
| rdev->config.cik.max_backends_per_se); |
| |
| /* set HW defaults for 3D engine */ |
| WREG32(CP_MEQ_THRESHOLDS, MEQ1_START(0x30) | MEQ2_START(0x60)); |
| |
| WREG32(SX_DEBUG_1, 0x20); |
| |
| WREG32(TA_CNTL_AUX, 0x00010000); |
| |
| tmp = RREG32(SPI_CONFIG_CNTL); |
| tmp |= 0x03000000; |
| WREG32(SPI_CONFIG_CNTL, tmp); |
| |
| WREG32(SQ_CONFIG, 1); |
| |
| WREG32(DB_DEBUG, 0); |
| |
| tmp = RREG32(DB_DEBUG2) & ~0xf00fffff; |
| tmp |= 0x00000400; |
| WREG32(DB_DEBUG2, tmp); |
| |
| tmp = RREG32(DB_DEBUG3) & ~0x0002021c; |
| tmp |= 0x00020200; |
| WREG32(DB_DEBUG3, tmp); |
| |
| tmp = RREG32(CB_HW_CONTROL) & ~0x00010000; |
| tmp |= 0x00018208; |
| WREG32(CB_HW_CONTROL, tmp); |
| |
| WREG32(SPI_CONFIG_CNTL_1, VTX_DONE_DELAY(4)); |
| |
| WREG32(PA_SC_FIFO_SIZE, (SC_FRONTEND_PRIM_FIFO_SIZE(rdev->config.cik.sc_prim_fifo_size_frontend) | |
| SC_BACKEND_PRIM_FIFO_SIZE(rdev->config.cik.sc_prim_fifo_size_backend) | |
| SC_HIZ_TILE_FIFO_SIZE(rdev->config.cik.sc_hiz_tile_fifo_size) | |
| SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.cik.sc_earlyz_tile_fifo_size))); |
| |
| WREG32(VGT_NUM_INSTANCES, 1); |
| |
| WREG32(CP_PERFMON_CNTL, 0); |
| |
| WREG32(SQ_CONFIG, 0); |
| |
| WREG32(PA_SC_FORCE_EOV_MAX_CNTS, (FORCE_EOV_MAX_CLK_CNT(4095) | |
| FORCE_EOV_MAX_REZ_CNT(255))); |
| |
| WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(VC_AND_TC) | |
| AUTO_INVLD_EN(ES_AND_GS_AUTO)); |
| |
| WREG32(VGT_GS_VERTEX_REUSE, 16); |
| WREG32(PA_SC_LINE_STIPPLE_STATE, 0); |
| |
| tmp = RREG32(HDP_MISC_CNTL); |
| tmp |= HDP_FLUSH_INVALIDATE_CACHE; |
| WREG32(HDP_MISC_CNTL, tmp); |
| |
| hdp_host_path_cntl = RREG32(HDP_HOST_PATH_CNTL); |
| WREG32(HDP_HOST_PATH_CNTL, hdp_host_path_cntl); |
| |
| WREG32(PA_CL_ENHANCE, CLIP_VTX_REORDER_ENA | NUM_CLIP_SEQ(3)); |
| WREG32(PA_SC_ENHANCE, ENABLE_PA_SC_OUT_OF_ORDER); |
| |
| udelay(50); |
| } |
| |
| /** |
| * cik_gpu_is_lockup - check if the 3D engine is locked up |
| * |
| * @rdev: radeon_device pointer |
| * @ring: radeon_ring structure holding ring information |
| * |
| * Check if the 3D engine is locked up (CIK). |
| * Returns true if the engine is locked, false if not. |
| */ |
| bool cik_gpu_is_lockup(struct radeon_device *rdev, struct radeon_ring *ring) |
| { |
| u32 srbm_status, srbm_status2; |
| u32 grbm_status, grbm_status2; |
| u32 grbm_status_se0, grbm_status_se1, grbm_status_se2, grbm_status_se3; |
| |
| srbm_status = RREG32(SRBM_STATUS); |
| srbm_status2 = RREG32(SRBM_STATUS2); |
| grbm_status = RREG32(GRBM_STATUS); |
| grbm_status2 = RREG32(GRBM_STATUS2); |
| grbm_status_se0 = RREG32(GRBM_STATUS_SE0); |
| grbm_status_se1 = RREG32(GRBM_STATUS_SE1); |
| grbm_status_se2 = RREG32(GRBM_STATUS_SE2); |
| grbm_status_se3 = RREG32(GRBM_STATUS_SE3); |
| if (!(grbm_status & GUI_ACTIVE)) { |
| radeon_ring_lockup_update(ring); |
| return false; |
| } |
| /* force CP activities */ |
| radeon_ring_force_activity(rdev, ring); |
| return radeon_ring_test_lockup(rdev, ring); |
| } |
| |
| /** |
| * cik_gfx_gpu_soft_reset - soft reset the 3D engine and CPG |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Soft reset the GFX engine and CPG blocks (CIK). |
| * XXX: deal with reseting RLC and CPF |
| * Returns 0 for success. |
| */ |
| static int cik_gfx_gpu_soft_reset(struct radeon_device *rdev) |
| { |
| struct evergreen_mc_save save; |
| u32 grbm_reset = 0; |
| |
| if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) |
| return 0; |
| |
| dev_info(rdev->dev, "GPU GFX softreset \n"); |
| dev_info(rdev->dev, " GRBM_STATUS=0x%08X\n", |
| RREG32(GRBM_STATUS)); |
| dev_info(rdev->dev, " GRBM_STATUS2=0x%08X\n", |
| RREG32(GRBM_STATUS2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE0=0x%08X\n", |
| RREG32(GRBM_STATUS_SE0)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE1=0x%08X\n", |
| RREG32(GRBM_STATUS_SE1)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE2=0x%08X\n", |
| RREG32(GRBM_STATUS_SE2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE3=0x%08X\n", |
| RREG32(GRBM_STATUS_SE3)); |
| dev_info(rdev->dev, " SRBM_STATUS=0x%08X\n", |
| RREG32(SRBM_STATUS)); |
| dev_info(rdev->dev, " SRBM_STATUS2=0x%08X\n", |
| RREG32(SRBM_STATUS2)); |
| evergreen_mc_stop(rdev, &save); |
| if (radeon_mc_wait_for_idle(rdev)) { |
| dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); |
| } |
| /* Disable CP parsing/prefetching */ |
| WREG32(CP_ME_CNTL, CP_ME_HALT | CP_PFP_HALT | CP_CE_HALT); |
| |
| /* reset all the gfx block and all CPG blocks */ |
| grbm_reset = SOFT_RESET_CPG | SOFT_RESET_GFX; |
| |
| dev_info(rdev->dev, " GRBM_SOFT_RESET=0x%08X\n", grbm_reset); |
| WREG32(GRBM_SOFT_RESET, grbm_reset); |
| (void)RREG32(GRBM_SOFT_RESET); |
| udelay(50); |
| WREG32(GRBM_SOFT_RESET, 0); |
| (void)RREG32(GRBM_SOFT_RESET); |
| /* Wait a little for things to settle down */ |
| udelay(50); |
| dev_info(rdev->dev, " GRBM_STATUS=0x%08X\n", |
| RREG32(GRBM_STATUS)); |
| dev_info(rdev->dev, " GRBM_STATUS2=0x%08X\n", |
| RREG32(GRBM_STATUS2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE0=0x%08X\n", |
| RREG32(GRBM_STATUS_SE0)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE1=0x%08X\n", |
| RREG32(GRBM_STATUS_SE1)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE2=0x%08X\n", |
| RREG32(GRBM_STATUS_SE2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE3=0x%08X\n", |
| RREG32(GRBM_STATUS_SE3)); |
| dev_info(rdev->dev, " SRBM_STATUS=0x%08X\n", |
| RREG32(SRBM_STATUS)); |
| dev_info(rdev->dev, " SRBM_STATUS2=0x%08X\n", |
| RREG32(SRBM_STATUS2)); |
| evergreen_mc_resume(rdev, &save); |
| return 0; |
| } |
| |
| /** |
| * cik_compute_gpu_soft_reset - soft reset CPC |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Soft reset the CPC blocks (CIK). |
| * XXX: deal with reseting RLC and CPF |
| * Returns 0 for success. |
| */ |
| static int cik_compute_gpu_soft_reset(struct radeon_device *rdev) |
| { |
| struct evergreen_mc_save save; |
| u32 grbm_reset = 0; |
| |
| dev_info(rdev->dev, "GPU compute softreset \n"); |
| dev_info(rdev->dev, " GRBM_STATUS=0x%08X\n", |
| RREG32(GRBM_STATUS)); |
| dev_info(rdev->dev, " GRBM_STATUS2=0x%08X\n", |
| RREG32(GRBM_STATUS2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE0=0x%08X\n", |
| RREG32(GRBM_STATUS_SE0)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE1=0x%08X\n", |
| RREG32(GRBM_STATUS_SE1)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE2=0x%08X\n", |
| RREG32(GRBM_STATUS_SE2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE3=0x%08X\n", |
| RREG32(GRBM_STATUS_SE3)); |
| dev_info(rdev->dev, " SRBM_STATUS=0x%08X\n", |
| RREG32(SRBM_STATUS)); |
| dev_info(rdev->dev, " SRBM_STATUS2=0x%08X\n", |
| RREG32(SRBM_STATUS2)); |
| evergreen_mc_stop(rdev, &save); |
| if (radeon_mc_wait_for_idle(rdev)) { |
| dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); |
| } |
| /* Disable CP parsing/prefetching */ |
| WREG32(CP_MEC_CNTL, MEC_ME1_HALT | MEC_ME2_HALT); |
| |
| /* reset all the CPC blocks */ |
| grbm_reset = SOFT_RESET_CPG; |
| |
| dev_info(rdev->dev, " GRBM_SOFT_RESET=0x%08X\n", grbm_reset); |
| WREG32(GRBM_SOFT_RESET, grbm_reset); |
| (void)RREG32(GRBM_SOFT_RESET); |
| udelay(50); |
| WREG32(GRBM_SOFT_RESET, 0); |
| (void)RREG32(GRBM_SOFT_RESET); |
| /* Wait a little for things to settle down */ |
| udelay(50); |
| dev_info(rdev->dev, " GRBM_STATUS=0x%08X\n", |
| RREG32(GRBM_STATUS)); |
| dev_info(rdev->dev, " GRBM_STATUS2=0x%08X\n", |
| RREG32(GRBM_STATUS2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE0=0x%08X\n", |
| RREG32(GRBM_STATUS_SE0)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE1=0x%08X\n", |
| RREG32(GRBM_STATUS_SE1)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE2=0x%08X\n", |
| RREG32(GRBM_STATUS_SE2)); |
| dev_info(rdev->dev, " GRBM_STATUS_SE3=0x%08X\n", |
| RREG32(GRBM_STATUS_SE3)); |
| dev_info(rdev->dev, " SRBM_STATUS=0x%08X\n", |
| RREG32(SRBM_STATUS)); |
| dev_info(rdev->dev, " SRBM_STATUS2=0x%08X\n", |
| RREG32(SRBM_STATUS2)); |
| evergreen_mc_resume(rdev, &save); |
| return 0; |
| } |
| |
| /** |
| * cik_asic_reset - soft reset compute and gfx |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Soft reset the CPC blocks (CIK). |
| * XXX: make this more fine grained and only reset |
| * what is necessary. |
| * Returns 0 for success. |
| */ |
| int cik_asic_reset(struct radeon_device *rdev) |
| { |
| int r; |
| |
| r = cik_compute_gpu_soft_reset(rdev); |
| if (r) |
| dev_info(rdev->dev, "Compute reset failed!\n"); |
| |
| return cik_gfx_gpu_soft_reset(rdev); |
| } |
| |
| /* MC */ |
| /** |
| * cik_mc_program - program the GPU memory controller |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Set the location of vram, gart, and AGP in the GPU's |
| * physical address space (CIK). |
| */ |
| static void cik_mc_program(struct radeon_device *rdev) |
| { |
| struct evergreen_mc_save save; |
| u32 tmp; |
| int i, j; |
| |
| /* Initialize HDP */ |
| for (i = 0, j = 0; i < 32; i++, j += 0x18) { |
| WREG32((0x2c14 + j), 0x00000000); |
| WREG32((0x2c18 + j), 0x00000000); |
| WREG32((0x2c1c + j), 0x00000000); |
| WREG32((0x2c20 + j), 0x00000000); |
| WREG32((0x2c24 + j), 0x00000000); |
| } |
| WREG32(HDP_REG_COHERENCY_FLUSH_CNTL, 0); |
| |
| evergreen_mc_stop(rdev, &save); |
| if (radeon_mc_wait_for_idle(rdev)) { |
| dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); |
| } |
| /* Lockout access through VGA aperture*/ |
| WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE); |
| /* Update configuration */ |
| WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, |
| rdev->mc.vram_start >> 12); |
| WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, |
| rdev->mc.vram_end >> 12); |
| WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, |
| rdev->vram_scratch.gpu_addr >> 12); |
| tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16; |
| tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF); |
| WREG32(MC_VM_FB_LOCATION, tmp); |
| /* XXX double check these! */ |
| WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8)); |
| WREG32(HDP_NONSURFACE_INFO, (2 << 7) | (1 << 30)); |
| WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF); |
| WREG32(MC_VM_AGP_BASE, 0); |
| WREG32(MC_VM_AGP_TOP, 0x0FFFFFFF); |
| WREG32(MC_VM_AGP_BOT, 0x0FFFFFFF); |
| if (radeon_mc_wait_for_idle(rdev)) { |
| dev_warn(rdev->dev, "Wait for MC idle timedout !\n"); |
| } |
| evergreen_mc_resume(rdev, &save); |
| /* we need to own VRAM, so turn off the VGA renderer here |
| * to stop it overwriting our objects */ |
| rv515_vga_render_disable(rdev); |
| } |
| |
| /** |
| * cik_mc_init - initialize the memory controller driver params |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Look up the amount of vram, vram width, and decide how to place |
| * vram and gart within the GPU's physical address space (CIK). |
| * Returns 0 for success. |
| */ |
| static int cik_mc_init(struct radeon_device *rdev) |
| { |
| u32 tmp; |
| int chansize, numchan; |
| |
| /* Get VRAM informations */ |
| rdev->mc.vram_is_ddr = true; |
| tmp = RREG32(MC_ARB_RAMCFG); |
| if (tmp & CHANSIZE_MASK) { |
| chansize = 64; |
| } else { |
| chansize = 32; |
| } |
| tmp = RREG32(MC_SHARED_CHMAP); |
| switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { |
| case 0: |
| default: |
| numchan = 1; |
| break; |
| case 1: |
| numchan = 2; |
| break; |
| case 2: |
| numchan = 4; |
| break; |
| case 3: |
| numchan = 8; |
| break; |
| case 4: |
| numchan = 3; |
| break; |
| case 5: |
| numchan = 6; |
| break; |
| case 6: |
| numchan = 10; |
| break; |
| case 7: |
| numchan = 12; |
| break; |
| case 8: |
| numchan = 16; |
| break; |
| } |
| rdev->mc.vram_width = numchan * chansize; |
| /* Could aper size report 0 ? */ |
| rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0); |
| rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0); |
| /* size in MB on si */ |
| rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; |
| rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; |
| rdev->mc.visible_vram_size = rdev->mc.aper_size; |
| si_vram_gtt_location(rdev, &rdev->mc); |
| radeon_update_bandwidth_info(rdev); |
| |
| return 0; |
| } |
| |
| /* |
| * GART |
| * VMID 0 is the physical GPU addresses as used by the kernel. |
| * VMIDs 1-15 are used for userspace clients and are handled |
| * by the radeon vm/hsa code. |
| */ |
| /** |
| * cik_pcie_gart_tlb_flush - gart tlb flush callback |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Flush the TLB for the VMID 0 page table (CIK). |
| */ |
| void cik_pcie_gart_tlb_flush(struct radeon_device *rdev) |
| { |
| /* flush hdp cache */ |
| WREG32(HDP_MEM_COHERENCY_FLUSH_CNTL, 0); |
| |
| /* bits 0-15 are the VM contexts0-15 */ |
| WREG32(VM_INVALIDATE_REQUEST, 0x1); |
| } |
| |
| /** |
| * cik_pcie_gart_enable - gart enable |
| * |
| * @rdev: radeon_device pointer |
| * |
| * This sets up the TLBs, programs the page tables for VMID0, |
| * sets up the hw for VMIDs 1-15 which are allocated on |
| * demand, and sets up the global locations for the LDS, GDS, |
| * and GPUVM for FSA64 clients (CIK). |
| * Returns 0 for success, errors for failure. |
| */ |
| static int cik_pcie_gart_enable(struct radeon_device *rdev) |
| { |
| int r, i; |
| |
| if (rdev->gart.robj == NULL) { |
| dev_err(rdev->dev, "No VRAM object for PCIE GART.\n"); |
| return -EINVAL; |
| } |
| r = radeon_gart_table_vram_pin(rdev); |
| if (r) |
| return r; |
| radeon_gart_restore(rdev); |
| /* Setup TLB control */ |
| WREG32(MC_VM_MX_L1_TLB_CNTL, |
| (0xA << 7) | |
| ENABLE_L1_TLB | |
| SYSTEM_ACCESS_MODE_NOT_IN_SYS | |
| ENABLE_ADVANCED_DRIVER_MODEL | |
| SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU); |
| /* Setup L2 cache */ |
| WREG32(VM_L2_CNTL, ENABLE_L2_CACHE | |
| ENABLE_L2_FRAGMENT_PROCESSING | |
| ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE | |
| ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE | |
| EFFECTIVE_L2_QUEUE_SIZE(7) | |
| CONTEXT1_IDENTITY_ACCESS_MODE(1)); |
| WREG32(VM_L2_CNTL2, INVALIDATE_ALL_L1_TLBS | INVALIDATE_L2_CACHE); |
| WREG32(VM_L2_CNTL3, L2_CACHE_BIGK_ASSOCIATIVITY | |
| L2_CACHE_BIGK_FRAGMENT_SIZE(6)); |
| /* setup context0 */ |
| WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12); |
| WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12); |
| WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12); |
| WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR, |
| (u32)(rdev->dummy_page.addr >> 12)); |
| WREG32(VM_CONTEXT0_CNTL2, 0); |
| WREG32(VM_CONTEXT0_CNTL, (ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) | |
| RANGE_PROTECTION_FAULT_ENABLE_DEFAULT)); |
| |
| WREG32(0x15D4, 0); |
| WREG32(0x15D8, 0); |
| WREG32(0x15DC, 0); |
| |
| /* empty context1-15 */ |
| /* FIXME start with 4G, once using 2 level pt switch to full |
| * vm size space |
| */ |
| /* set vm size, must be a multiple of 4 */ |
| WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0); |
| WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn); |
| for (i = 1; i < 16; i++) { |
| if (i < 8) |
| WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), |
| rdev->gart.table_addr >> 12); |
| else |
| WREG32(VM_CONTEXT8_PAGE_TABLE_BASE_ADDR + ((i - 8) << 2), |
| rdev->gart.table_addr >> 12); |
| } |
| |
| /* enable context1-15 */ |
| WREG32(VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR, |
| (u32)(rdev->dummy_page.addr >> 12)); |
| WREG32(VM_CONTEXT1_CNTL2, 4); |
| WREG32(VM_CONTEXT1_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(1) | |
| RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT | |
| RANGE_PROTECTION_FAULT_ENABLE_DEFAULT | |
| DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT | |
| DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT | |
| PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT | |
| PDE0_PROTECTION_FAULT_ENABLE_DEFAULT | |
| VALID_PROTECTION_FAULT_ENABLE_INTERRUPT | |
| VALID_PROTECTION_FAULT_ENABLE_DEFAULT | |
| READ_PROTECTION_FAULT_ENABLE_INTERRUPT | |
| READ_PROTECTION_FAULT_ENABLE_DEFAULT | |
| WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT | |
| WRITE_PROTECTION_FAULT_ENABLE_DEFAULT); |
| |
| /* TC cache setup ??? */ |
| WREG32(TC_CFG_L1_LOAD_POLICY0, 0); |
| WREG32(TC_CFG_L1_LOAD_POLICY1, 0); |
| WREG32(TC_CFG_L1_STORE_POLICY, 0); |
| |
| WREG32(TC_CFG_L2_LOAD_POLICY0, 0); |
| WREG32(TC_CFG_L2_LOAD_POLICY1, 0); |
| WREG32(TC_CFG_L2_STORE_POLICY0, 0); |
| WREG32(TC_CFG_L2_STORE_POLICY1, 0); |
| WREG32(TC_CFG_L2_ATOMIC_POLICY, 0); |
| |
| WREG32(TC_CFG_L1_VOLATILE, 0); |
| WREG32(TC_CFG_L2_VOLATILE, 0); |
| |
| if (rdev->family == CHIP_KAVERI) { |
| u32 tmp = RREG32(CHUB_CONTROL); |
| tmp &= ~BYPASS_VM; |
| WREG32(CHUB_CONTROL, tmp); |
| } |
| |
| /* XXX SH_MEM regs */ |
| /* where to put LDS, scratch, GPUVM in FSA64 space */ |
| for (i = 0; i < 16; i++) { |
| WREG32(SRBM_GFX_CNTL, VMID(i)); |
| WREG32(SH_MEM_CONFIG, 0); |
| WREG32(SH_MEM_APE1_BASE, 1); |
| WREG32(SH_MEM_APE1_LIMIT, 0); |
| WREG32(SH_MEM_BASES, 0); |
| } |
| WREG32(SRBM_GFX_CNTL, 0); |
| |
| cik_pcie_gart_tlb_flush(rdev); |
| DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n", |
| (unsigned)(rdev->mc.gtt_size >> 20), |
| (unsigned long long)rdev->gart.table_addr); |
| rdev->gart.ready = true; |
| return 0; |
| } |
| |
| /** |
| * cik_pcie_gart_disable - gart disable |
| * |
| * @rdev: radeon_device pointer |
| * |
| * This disables all VM page table (CIK). |
| */ |
| static void cik_pcie_gart_disable(struct radeon_device *rdev) |
| { |
| /* Disable all tables */ |
| WREG32(VM_CONTEXT0_CNTL, 0); |
| WREG32(VM_CONTEXT1_CNTL, 0); |
| /* Setup TLB control */ |
| WREG32(MC_VM_MX_L1_TLB_CNTL, SYSTEM_ACCESS_MODE_NOT_IN_SYS | |
| SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU); |
| /* Setup L2 cache */ |
| WREG32(VM_L2_CNTL, |
| ENABLE_L2_FRAGMENT_PROCESSING | |
| ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE | |
| ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE | |
| EFFECTIVE_L2_QUEUE_SIZE(7) | |
| CONTEXT1_IDENTITY_ACCESS_MODE(1)); |
| WREG32(VM_L2_CNTL2, 0); |
| WREG32(VM_L2_CNTL3, L2_CACHE_BIGK_ASSOCIATIVITY | |
| L2_CACHE_BIGK_FRAGMENT_SIZE(6)); |
| radeon_gart_table_vram_unpin(rdev); |
| } |
| |
| /** |
| * cik_pcie_gart_fini - vm fini callback |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Tears down the driver GART/VM setup (CIK). |
| */ |
| static void cik_pcie_gart_fini(struct radeon_device *rdev) |
| { |
| cik_pcie_gart_disable(rdev); |
| radeon_gart_table_vram_free(rdev); |
| radeon_gart_fini(rdev); |
| } |
| |
| /* vm parser */ |
| /** |
| * cik_ib_parse - vm ib_parse callback |
| * |
| * @rdev: radeon_device pointer |
| * @ib: indirect buffer pointer |
| * |
| * CIK uses hw IB checking so this is a nop (CIK). |
| */ |
| int cik_ib_parse(struct radeon_device *rdev, struct radeon_ib *ib) |
| { |
| return 0; |
| } |
| |
| /* |
| * vm |
| * VMID 0 is the physical GPU addresses as used by the kernel. |
| * VMIDs 1-15 are used for userspace clients and are handled |
| * by the radeon vm/hsa code. |
| */ |
| /** |
| * cik_vm_init - cik vm init callback |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Inits cik specific vm parameters (number of VMs, base of vram for |
| * VMIDs 1-15) (CIK). |
| * Returns 0 for success. |
| */ |
| int cik_vm_init(struct radeon_device *rdev) |
| { |
| /* number of VMs */ |
| rdev->vm_manager.nvm = 16; |
| /* base offset of vram pages */ |
| if (rdev->flags & RADEON_IS_IGP) { |
| u64 tmp = RREG32(MC_VM_FB_OFFSET); |
| tmp <<= 22; |
| rdev->vm_manager.vram_base_offset = tmp; |
| } else |
| rdev->vm_manager.vram_base_offset = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * cik_vm_fini - cik vm fini callback |
| * |
| * @rdev: radeon_device pointer |
| * |
| * Tear down any asic specific VM setup (CIK). |
| */ |
| void cik_vm_fini(struct radeon_device *rdev) |
| { |
| } |
| |