| /* |
| * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) |
| * Copyrifht (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz |
| */ |
| |
| /* |
| * Mostly written by Mark Lord <mlord@pobox.com> |
| * and Gadi Oxman <gadio@netvision.net.il> |
| * and Andre Hedrick <andre@linux-ide.org> |
| * |
| * See linux/MAINTAINERS for address of current maintainer. |
| * |
| * This is the multiple IDE interface driver, as evolved from hd.c. |
| * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs |
| * (usually 14 & 15). |
| * There can be up to two drives per interface, as per the ATA-2 spec. |
| * |
| * ... |
| * |
| * From hd.c: |
| * | |
| * | It traverses the request-list, using interrupts to jump between functions. |
| * | As nearly all functions can be called within interrupts, we may not sleep. |
| * | Special care is recommended. Have Fun! |
| * | |
| * | modified by Drew Eckhardt to check nr of hd's from the CMOS. |
| * | |
| * | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug |
| * | in the early extended-partition checks and added DM partitions. |
| * | |
| * | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI). |
| * | |
| * | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", |
| * | and general streamlining by Mark Lord (mlord@pobox.com). |
| * |
| * October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by: |
| * |
| * Mark Lord (mlord@pobox.com) (IDE Perf.Pkg) |
| * Delman Lee (delman@ieee.org) ("Mr. atdisk2") |
| * Scott Snyder (snyder@fnald0.fnal.gov) (ATAPI IDE cd-rom) |
| * |
| * This was a rewrite of just about everything from hd.c, though some original |
| * code is still sprinkled about. Think of it as a major evolution, with |
| * inspiration from lots of linux users, esp. hamish@zot.apana.org.au |
| */ |
| |
| #define _IDE_C /* Tell ide.h it's really us */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/major.h> |
| #include <linux/errno.h> |
| #include <linux/genhd.h> |
| #include <linux/blkpg.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/ide.h> |
| #include <linux/completion.h> |
| #include <linux/reboot.h> |
| #include <linux/cdrom.h> |
| #include <linux/seq_file.h> |
| #include <linux/device.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| |
| /* default maximum number of failures */ |
| #define IDE_DEFAULT_MAX_FAILURES 1 |
| |
| struct class *ide_port_class; |
| |
| static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, |
| IDE2_MAJOR, IDE3_MAJOR, |
| IDE4_MAJOR, IDE5_MAJOR, |
| IDE6_MAJOR, IDE7_MAJOR, |
| IDE8_MAJOR, IDE9_MAJOR }; |
| |
| static int idebus_parameter; /* holds the "idebus=" parameter */ |
| static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ |
| |
| DEFINE_MUTEX(ide_cfg_mtx); |
| __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); |
| |
| int noautodma = 0; |
| |
| #ifdef CONFIG_BLK_DEV_IDEACPI |
| int ide_noacpi = 0; |
| int ide_noacpitfs = 1; |
| int ide_noacpionboot = 1; |
| #endif |
| |
| /* |
| * This is declared extern in ide.h, for access by other IDE modules: |
| */ |
| ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ |
| |
| EXPORT_SYMBOL(ide_hwifs); |
| |
| static void ide_port_init_devices_data(ide_hwif_t *); |
| |
| /* |
| * Do not even *think* about calling this! |
| */ |
| void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) |
| { |
| /* bulk initialize hwif & drive info with zeros */ |
| memset(hwif, 0, sizeof(ide_hwif_t)); |
| |
| /* fill in any non-zero initial values */ |
| hwif->index = index; |
| hwif->major = ide_hwif_to_major[index]; |
| |
| hwif->name[0] = 'i'; |
| hwif->name[1] = 'd'; |
| hwif->name[2] = 'e'; |
| hwif->name[3] = '0' + index; |
| |
| hwif->bus_state = BUSSTATE_ON; |
| |
| init_completion(&hwif->gendev_rel_comp); |
| |
| default_hwif_iops(hwif); |
| default_hwif_transport(hwif); |
| |
| ide_port_init_devices_data(hwif); |
| } |
| EXPORT_SYMBOL_GPL(ide_init_port_data); |
| |
| static void ide_port_init_devices_data(ide_hwif_t *hwif) |
| { |
| int unit; |
| |
| for (unit = 0; unit < MAX_DRIVES; ++unit) { |
| ide_drive_t *drive = &hwif->drives[unit]; |
| u8 j = (hwif->index * MAX_DRIVES) + unit; |
| |
| memset(drive, 0, sizeof(*drive)); |
| |
| drive->media = ide_disk; |
| drive->select.all = (unit<<4)|0xa0; |
| drive->hwif = hwif; |
| drive->ctl = 0x08; |
| drive->ready_stat = READY_STAT; |
| drive->bad_wstat = BAD_W_STAT; |
| drive->special.b.recalibrate = 1; |
| drive->special.b.set_geometry = 1; |
| drive->name[0] = 'h'; |
| drive->name[1] = 'd'; |
| drive->name[2] = 'a' + j; |
| drive->max_failures = IDE_DEFAULT_MAX_FAILURES; |
| |
| INIT_LIST_HEAD(&drive->list); |
| init_completion(&drive->gendev_rel_comp); |
| } |
| } |
| |
| |
| static void init_hwif_default(ide_hwif_t *hwif, unsigned int index) |
| { |
| hw_regs_t hw; |
| |
| memset(&hw, 0, sizeof(hw_regs_t)); |
| |
| ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq); |
| |
| memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports)); |
| |
| hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; |
| } |
| |
| /* |
| * init_ide_data() sets reasonable default values into all fields |
| * of all instances of the hwifs and drives, but only on the first call. |
| * Subsequent calls have no effect (they don't wipe out anything). |
| * |
| * This routine is normally called at driver initialization time, |
| * but may also be called MUCH earlier during kernel "command-line" |
| * parameter processing. As such, we cannot depend on any other parts |
| * of the kernel (such as memory allocation) to be functioning yet. |
| * |
| * This is too bad, as otherwise we could dynamically allocate the |
| * ide_drive_t structs as needed, rather than always consuming memory |
| * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them. |
| * |
| * FIXME: We should stuff the setup data into __init and copy the |
| * relevant hwifs/allocate them properly during boot. |
| */ |
| #define MAGIC_COOKIE 0x12345678 |
| static void __init init_ide_data (void) |
| { |
| ide_hwif_t *hwif; |
| unsigned int index; |
| static unsigned long magic_cookie = MAGIC_COOKIE; |
| |
| if (magic_cookie != MAGIC_COOKIE) |
| return; /* already initialized */ |
| magic_cookie = 0; |
| |
| /* Initialise all interface structures */ |
| for (index = 0; index < MAX_HWIFS; ++index) { |
| hwif = &ide_hwifs[index]; |
| ide_init_port_data(hwif, index); |
| init_hwif_default(hwif, index); |
| #if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI) |
| hwif->irq = |
| ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]); |
| #endif |
| } |
| } |
| |
| /** |
| * ide_system_bus_speed - guess bus speed |
| * |
| * ide_system_bus_speed() returns what we think is the system VESA/PCI |
| * bus speed (in MHz). This is used for calculating interface PIO timings. |
| * The default is 40 for known PCI systems, 50 otherwise. |
| * The "idebus=xx" parameter can be used to override this value. |
| * The actual value to be used is computed/displayed the first time |
| * through. Drivers should only use this as a last resort. |
| * |
| * Returns a guessed speed in MHz. |
| */ |
| |
| static int ide_system_bus_speed(void) |
| { |
| #ifdef CONFIG_PCI |
| static struct pci_device_id pci_default[] = { |
| { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) }, |
| { } |
| }; |
| #else |
| #define pci_default 0 |
| #endif /* CONFIG_PCI */ |
| |
| /* user supplied value */ |
| if (idebus_parameter) |
| return idebus_parameter; |
| |
| /* safe default value for PCI or VESA and PCI*/ |
| return pci_dev_present(pci_default) ? 33 : 50; |
| } |
| |
| ide_hwif_t * ide_find_port(unsigned long base) |
| { |
| ide_hwif_t *hwif; |
| int i; |
| |
| for (i = 0; i < MAX_HWIFS; i++) { |
| hwif = &ide_hwifs[i]; |
| if (hwif->io_ports[IDE_DATA_OFFSET] == base) |
| goto found; |
| } |
| |
| for (i = 0; i < MAX_HWIFS; i++) { |
| hwif = &ide_hwifs[i]; |
| if (hwif->chipset == ide_unknown) |
| goto found; |
| } |
| |
| hwif = NULL; |
| found: |
| return hwif; |
| } |
| |
| EXPORT_SYMBOL_GPL(ide_find_port); |
| |
| static struct resource* hwif_request_region(ide_hwif_t *hwif, |
| unsigned long addr, int num) |
| { |
| struct resource *res = request_region(addr, num, hwif->name); |
| |
| if (!res) |
| printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", |
| hwif->name, addr, addr+num-1); |
| return res; |
| } |
| |
| /** |
| * ide_hwif_request_regions - request resources for IDE |
| * @hwif: interface to use |
| * |
| * Requests all the needed resources for an interface. |
| * Right now core IDE code does this work which is deeply wrong. |
| * MMIO leaves it to the controller driver, |
| * PIO will migrate this way over time. |
| */ |
| |
| int ide_hwif_request_regions(ide_hwif_t *hwif) |
| { |
| unsigned long addr; |
| unsigned int i; |
| |
| if (hwif->mmio) |
| return 0; |
| addr = hwif->io_ports[IDE_CONTROL_OFFSET]; |
| if (addr && !hwif_request_region(hwif, addr, 1)) |
| goto control_region_busy; |
| hwif->straight8 = 0; |
| addr = hwif->io_ports[IDE_DATA_OFFSET]; |
| if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) { |
| if (!hwif_request_region(hwif, addr, 8)) |
| goto data_region_busy; |
| hwif->straight8 = 1; |
| return 0; |
| } |
| for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { |
| addr = hwif->io_ports[i]; |
| if (!hwif_request_region(hwif, addr, 1)) { |
| while (--i) |
| release_region(addr, 1); |
| goto data_region_busy; |
| } |
| } |
| return 0; |
| |
| data_region_busy: |
| addr = hwif->io_ports[IDE_CONTROL_OFFSET]; |
| if (addr) |
| release_region(addr, 1); |
| control_region_busy: |
| /* If any errors are return, we drop the hwif interface. */ |
| return -EBUSY; |
| } |
| |
| /** |
| * ide_hwif_release_regions - free IDE resources |
| * |
| * Note that we only release the standard ports, |
| * and do not even try to handle any extra ports |
| * allocated for weird IDE interface chipsets. |
| * |
| * Note also that we don't yet handle mmio resources here. More |
| * importantly our caller should be doing this so we need to |
| * restructure this as a helper function for drivers. |
| */ |
| |
| void ide_hwif_release_regions(ide_hwif_t *hwif) |
| { |
| u32 i = 0; |
| |
| if (hwif->mmio) |
| return; |
| if (hwif->io_ports[IDE_CONTROL_OFFSET]) |
| release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1); |
| if (hwif->straight8) { |
| release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); |
| return; |
| } |
| for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) |
| if (hwif->io_ports[i]) |
| release_region(hwif->io_ports[i], 1); |
| } |
| |
| /** |
| * ide_hwif_restore - restore hwif to template |
| * @hwif: hwif to update |
| * @tmp_hwif: template |
| * |
| * Restore hwif to a previous state by copying most settings |
| * from the template. |
| */ |
| |
| static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) |
| { |
| hwif->hwgroup = tmp_hwif->hwgroup; |
| |
| hwif->gendev.parent = tmp_hwif->gendev.parent; |
| |
| hwif->proc = tmp_hwif->proc; |
| |
| hwif->major = tmp_hwif->major; |
| hwif->straight8 = tmp_hwif->straight8; |
| hwif->bus_state = tmp_hwif->bus_state; |
| |
| hwif->host_flags = tmp_hwif->host_flags; |
| |
| hwif->pio_mask = tmp_hwif->pio_mask; |
| |
| hwif->ultra_mask = tmp_hwif->ultra_mask; |
| hwif->mwdma_mask = tmp_hwif->mwdma_mask; |
| hwif->swdma_mask = tmp_hwif->swdma_mask; |
| |
| hwif->cbl = tmp_hwif->cbl; |
| |
| hwif->chipset = tmp_hwif->chipset; |
| hwif->hold = tmp_hwif->hold; |
| |
| hwif->dev = tmp_hwif->dev; |
| |
| #ifdef CONFIG_BLK_DEV_IDEPCI |
| hwif->cds = tmp_hwif->cds; |
| #endif |
| |
| hwif->set_pio_mode = tmp_hwif->set_pio_mode; |
| hwif->set_dma_mode = tmp_hwif->set_dma_mode; |
| hwif->mdma_filter = tmp_hwif->mdma_filter; |
| hwif->udma_filter = tmp_hwif->udma_filter; |
| hwif->selectproc = tmp_hwif->selectproc; |
| hwif->reset_poll = tmp_hwif->reset_poll; |
| hwif->pre_reset = tmp_hwif->pre_reset; |
| hwif->resetproc = tmp_hwif->resetproc; |
| hwif->maskproc = tmp_hwif->maskproc; |
| hwif->quirkproc = tmp_hwif->quirkproc; |
| |
| hwif->ata_input_data = tmp_hwif->ata_input_data; |
| hwif->ata_output_data = tmp_hwif->ata_output_data; |
| hwif->atapi_input_bytes = tmp_hwif->atapi_input_bytes; |
| hwif->atapi_output_bytes = tmp_hwif->atapi_output_bytes; |
| |
| hwif->dma_host_set = tmp_hwif->dma_host_set; |
| hwif->dma_setup = tmp_hwif->dma_setup; |
| hwif->dma_exec_cmd = tmp_hwif->dma_exec_cmd; |
| hwif->dma_start = tmp_hwif->dma_start; |
| hwif->ide_dma_end = tmp_hwif->ide_dma_end; |
| hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq; |
| hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq; |
| hwif->dma_lost_irq = tmp_hwif->dma_lost_irq; |
| hwif->dma_timeout = tmp_hwif->dma_timeout; |
| |
| hwif->OUTB = tmp_hwif->OUTB; |
| hwif->OUTBSYNC = tmp_hwif->OUTBSYNC; |
| hwif->OUTW = tmp_hwif->OUTW; |
| hwif->OUTSW = tmp_hwif->OUTSW; |
| hwif->OUTSL = tmp_hwif->OUTSL; |
| |
| hwif->INB = tmp_hwif->INB; |
| hwif->INW = tmp_hwif->INW; |
| hwif->INSW = tmp_hwif->INSW; |
| hwif->INSL = tmp_hwif->INSL; |
| |
| hwif->sg_max_nents = tmp_hwif->sg_max_nents; |
| |
| hwif->mmio = tmp_hwif->mmio; |
| hwif->rqsize = tmp_hwif->rqsize; |
| |
| #ifndef CONFIG_BLK_DEV_IDECS |
| hwif->irq = tmp_hwif->irq; |
| #endif |
| |
| hwif->dma_base = tmp_hwif->dma_base; |
| hwif->dma_command = tmp_hwif->dma_command; |
| hwif->dma_vendor1 = tmp_hwif->dma_vendor1; |
| hwif->dma_status = tmp_hwif->dma_status; |
| hwif->dma_vendor3 = tmp_hwif->dma_vendor3; |
| hwif->dma_prdtable = tmp_hwif->dma_prdtable; |
| |
| hwif->config_data = tmp_hwif->config_data; |
| hwif->select_data = tmp_hwif->select_data; |
| hwif->extra_base = tmp_hwif->extra_base; |
| hwif->extra_ports = tmp_hwif->extra_ports; |
| |
| hwif->hwif_data = tmp_hwif->hwif_data; |
| } |
| |
| void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) |
| { |
| ide_hwgroup_t *hwgroup = hwif->hwgroup; |
| |
| spin_lock_irq(&ide_lock); |
| /* |
| * Remove us from the hwgroup, and free |
| * the hwgroup if we were the only member |
| */ |
| if (hwif->next == hwif) { |
| BUG_ON(hwgroup->hwif != hwif); |
| kfree(hwgroup); |
| } else { |
| /* There is another interface in hwgroup. |
| * Unlink us, and set hwgroup->drive and ->hwif to |
| * something sane. |
| */ |
| ide_hwif_t *g = hwgroup->hwif; |
| |
| while (g->next != hwif) |
| g = g->next; |
| g->next = hwif->next; |
| if (hwgroup->hwif == hwif) { |
| /* Chose a random hwif for hwgroup->hwif. |
| * It's guaranteed that there are no drives |
| * left in the hwgroup. |
| */ |
| BUG_ON(hwgroup->drive != NULL); |
| hwgroup->hwif = g; |
| } |
| BUG_ON(hwgroup->hwif == hwif); |
| } |
| spin_unlock_irq(&ide_lock); |
| } |
| |
| /* Called with ide_lock held. */ |
| static void __ide_port_unregister_devices(ide_hwif_t *hwif) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_DRIVES; i++) { |
| ide_drive_t *drive = &hwif->drives[i]; |
| |
| if (drive->present) { |
| spin_unlock_irq(&ide_lock); |
| device_unregister(&drive->gendev); |
| wait_for_completion(&drive->gendev_rel_comp); |
| spin_lock_irq(&ide_lock); |
| } |
| } |
| } |
| |
| void ide_port_unregister_devices(ide_hwif_t *hwif) |
| { |
| mutex_lock(&ide_cfg_mtx); |
| spin_lock_irq(&ide_lock); |
| __ide_port_unregister_devices(hwif); |
| hwif->present = 0; |
| ide_port_init_devices_data(hwif); |
| spin_unlock_irq(&ide_lock); |
| mutex_unlock(&ide_cfg_mtx); |
| } |
| EXPORT_SYMBOL_GPL(ide_port_unregister_devices); |
| |
| /** |
| * ide_unregister - free an IDE interface |
| * @index: index of interface (will change soon to a pointer) |
| * @init_default: init default hwif flag |
| * @restore: restore hwif flag |
| * |
| * Perform the final unregister of an IDE interface. At the moment |
| * we don't refcount interfaces so this will also get split up. |
| * |
| * Locking: |
| * The caller must not hold the IDE locks |
| * The drive present/vanishing is not yet properly locked |
| * Take care with the callbacks. These have been split to avoid |
| * deadlocking the IDE layer. The shutdown callback is called |
| * before we take the lock and free resources. It is up to the |
| * caller to be sure there is no pending I/O here, and that |
| * the interface will not be reopened (present/vanishing locking |
| * isn't yet done BTW). After we commit to the final kill we |
| * call the cleanup callback with the ide locks held. |
| * |
| * Unregister restores the hwif structures to the default state. |
| * This is raving bonkers. |
| */ |
| |
| void ide_unregister(unsigned int index, int init_default, int restore) |
| { |
| ide_hwif_t *hwif, *g; |
| static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */ |
| ide_hwgroup_t *hwgroup; |
| int irq_count = 0; |
| |
| BUG_ON(index >= MAX_HWIFS); |
| |
| BUG_ON(in_interrupt()); |
| BUG_ON(irqs_disabled()); |
| mutex_lock(&ide_cfg_mtx); |
| spin_lock_irq(&ide_lock); |
| hwif = &ide_hwifs[index]; |
| if (!hwif->present) |
| goto abort; |
| __ide_port_unregister_devices(hwif); |
| hwif->present = 0; |
| |
| spin_unlock_irq(&ide_lock); |
| |
| ide_proc_unregister_port(hwif); |
| |
| hwgroup = hwif->hwgroup; |
| /* |
| * free the irq if we were the only hwif using it |
| */ |
| g = hwgroup->hwif; |
| do { |
| if (g->irq == hwif->irq) |
| ++irq_count; |
| g = g->next; |
| } while (g != hwgroup->hwif); |
| if (irq_count == 1) |
| free_irq(hwif->irq, hwgroup); |
| |
| ide_remove_port_from_hwgroup(hwif); |
| |
| device_unregister(hwif->portdev); |
| device_unregister(&hwif->gendev); |
| wait_for_completion(&hwif->gendev_rel_comp); |
| |
| /* |
| * Remove us from the kernel's knowledge |
| */ |
| blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS); |
| kfree(hwif->sg_table); |
| unregister_blkdev(hwif->major, hwif->name); |
| spin_lock_irq(&ide_lock); |
| |
| if (hwif->dma_base) { |
| (void) ide_release_dma(hwif); |
| |
| hwif->dma_base = 0; |
| hwif->dma_command = 0; |
| hwif->dma_vendor1 = 0; |
| hwif->dma_status = 0; |
| hwif->dma_vendor3 = 0; |
| hwif->dma_prdtable = 0; |
| |
| hwif->extra_base = 0; |
| hwif->extra_ports = 0; |
| } |
| |
| ide_hwif_release_regions(hwif); |
| |
| /* copy original settings */ |
| tmp_hwif = *hwif; |
| |
| /* restore hwif data to pristine status */ |
| ide_init_port_data(hwif, index); |
| |
| if (init_default) |
| init_hwif_default(hwif, index); |
| |
| if (restore) |
| ide_hwif_restore(hwif, &tmp_hwif); |
| |
| abort: |
| spin_unlock_irq(&ide_lock); |
| mutex_unlock(&ide_cfg_mtx); |
| } |
| |
| EXPORT_SYMBOL(ide_unregister); |
| |
| void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) |
| { |
| memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); |
| hwif->irq = hw->irq; |
| hwif->noprobe = 0; |
| hwif->chipset = hw->chipset; |
| hwif->gendev.parent = hw->dev; |
| hwif->ack_intr = hw->ack_intr; |
| } |
| EXPORT_SYMBOL_GPL(ide_init_port_hw); |
| |
| /** |
| * ide_register_hw - register IDE interface |
| * @hw: hardware registers |
| * @quirkproc: quirkproc function |
| * @hwifp: pointer to returned hwif |
| * |
| * Register an IDE interface, specifying exactly the registers etc. |
| * |
| * Returns -1 on error. |
| */ |
| |
| static int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), |
| ide_hwif_t **hwifp) |
| { |
| int index, retry = 1; |
| ide_hwif_t *hwif; |
| u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; |
| |
| do { |
| hwif = ide_find_port(hw->io_ports[IDE_DATA_OFFSET]); |
| if (hwif) |
| goto found; |
| for (index = 0; index < MAX_HWIFS; index++) |
| ide_unregister(index, 1, 1); |
| } while (retry--); |
| return -1; |
| found: |
| index = hwif->index; |
| if (hwif->present) |
| ide_unregister(index, 0, 1); |
| else if (!hwif->hold) |
| ide_init_port_data(hwif, index); |
| |
| ide_init_port_hw(hwif, hw); |
| hwif->quirkproc = quirkproc; |
| |
| idx[0] = index; |
| |
| ide_device_add(idx, NULL); |
| |
| if (hwifp) |
| *hwifp = hwif; |
| |
| return hwif->present ? index : -1; |
| } |
| |
| /* |
| * Locks for IDE setting functionality |
| */ |
| |
| DEFINE_MUTEX(ide_setting_mtx); |
| |
| EXPORT_SYMBOL_GPL(ide_setting_mtx); |
| |
| /** |
| * ide_spin_wait_hwgroup - wait for group |
| * @drive: drive in the group |
| * |
| * Wait for an IDE device group to go non busy and then return |
| * holding the ide_lock which guards the hwgroup->busy status |
| * and right to use it. |
| */ |
| |
| int ide_spin_wait_hwgroup (ide_drive_t *drive) |
| { |
| ide_hwgroup_t *hwgroup = HWGROUP(drive); |
| unsigned long timeout = jiffies + (3 * HZ); |
| |
| spin_lock_irq(&ide_lock); |
| |
| while (hwgroup->busy) { |
| unsigned long lflags; |
| spin_unlock_irq(&ide_lock); |
| local_irq_set(lflags); |
| if (time_after(jiffies, timeout)) { |
| local_irq_restore(lflags); |
| printk(KERN_ERR "%s: channel busy\n", drive->name); |
| return -EBUSY; |
| } |
| local_irq_restore(lflags); |
| spin_lock_irq(&ide_lock); |
| } |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(ide_spin_wait_hwgroup); |
| |
| int set_io_32bit(ide_drive_t *drive, int arg) |
| { |
| if (drive->no_io_32bit) |
| return -EPERM; |
| |
| if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) |
| return -EINVAL; |
| |
| if (ide_spin_wait_hwgroup(drive)) |
| return -EBUSY; |
| |
| drive->io_32bit = arg; |
| |
| spin_unlock_irq(&ide_lock); |
| |
| return 0; |
| } |
| |
| static int set_ksettings(ide_drive_t *drive, int arg) |
| { |
| if (arg < 0 || arg > 1) |
| return -EINVAL; |
| |
| if (ide_spin_wait_hwgroup(drive)) |
| return -EBUSY; |
| drive->keep_settings = arg; |
| spin_unlock_irq(&ide_lock); |
| |
| return 0; |
| } |
| |
| int set_using_dma(ide_drive_t *drive, int arg) |
| { |
| #ifdef CONFIG_BLK_DEV_IDEDMA |
| ide_hwif_t *hwif = drive->hwif; |
| int err = -EPERM; |
| |
| if (arg < 0 || arg > 1) |
| return -EINVAL; |
| |
| if (!drive->id || !(drive->id->capability & 1)) |
| goto out; |
| |
| if (hwif->dma_host_set == NULL) |
| goto out; |
| |
| err = -EBUSY; |
| if (ide_spin_wait_hwgroup(drive)) |
| goto out; |
| /* |
| * set ->busy flag, unlock and let it ride |
| */ |
| hwif->hwgroup->busy = 1; |
| spin_unlock_irq(&ide_lock); |
| |
| err = 0; |
| |
| if (arg) { |
| if (ide_set_dma(drive)) |
| err = -EIO; |
| } else |
| ide_dma_off(drive); |
| |
| /* |
| * lock, clear ->busy flag and unlock before leaving |
| */ |
| spin_lock_irq(&ide_lock); |
| hwif->hwgroup->busy = 0; |
| spin_unlock_irq(&ide_lock); |
| out: |
| return err; |
| #else |
| if (arg < 0 || arg > 1) |
| return -EINVAL; |
| |
| return -EPERM; |
| #endif |
| } |
| |
| int set_pio_mode(ide_drive_t *drive, int arg) |
| { |
| struct request rq; |
| |
| if (arg < 0 || arg > 255) |
| return -EINVAL; |
| |
| if (drive->hwif->set_pio_mode == NULL) |
| return -ENOSYS; |
| |
| if (drive->special.b.set_tune) |
| return -EBUSY; |
| |
| ide_init_drive_cmd(&rq); |
| rq.cmd_type = REQ_TYPE_ATA_TASKFILE; |
| |
| drive->tune_req = (u8) arg; |
| drive->special.b.set_tune = 1; |
| (void) ide_do_drive_cmd(drive, &rq, ide_wait); |
| return 0; |
| } |
| |
| static int set_unmaskirq(ide_drive_t *drive, int arg) |
| { |
| if (drive->no_unmask) |
| return -EPERM; |
| |
| if (arg < 0 || arg > 1) |
| return -EINVAL; |
| |
| if (ide_spin_wait_hwgroup(drive)) |
| return -EBUSY; |
| drive->unmask = arg; |
| spin_unlock_irq(&ide_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * system_bus_clock - clock guess |
| * |
| * External version of the bus clock guess used by very old IDE drivers |
| * for things like VLB timings. Should not be used. |
| */ |
| |
| int system_bus_clock (void) |
| { |
| return system_bus_speed; |
| } |
| |
| EXPORT_SYMBOL(system_bus_clock); |
| |
| static int generic_ide_suspend(struct device *dev, pm_message_t mesg) |
| { |
| ide_drive_t *drive = dev->driver_data; |
| ide_hwif_t *hwif = HWIF(drive); |
| struct request rq; |
| struct request_pm_state rqpm; |
| ide_task_t args; |
| int ret; |
| |
| /* Call ACPI _GTM only once */ |
| if (!(drive->dn % 2)) |
| ide_acpi_get_timing(hwif); |
| |
| memset(&rq, 0, sizeof(rq)); |
| memset(&rqpm, 0, sizeof(rqpm)); |
| memset(&args, 0, sizeof(args)); |
| rq.cmd_type = REQ_TYPE_PM_SUSPEND; |
| rq.special = &args; |
| rq.data = &rqpm; |
| rqpm.pm_step = ide_pm_state_start_suspend; |
| if (mesg.event == PM_EVENT_PRETHAW) |
| mesg.event = PM_EVENT_FREEZE; |
| rqpm.pm_state = mesg.event; |
| |
| ret = ide_do_drive_cmd(drive, &rq, ide_wait); |
| /* only call ACPI _PS3 after both drivers are suspended */ |
| if (!ret && (((drive->dn % 2) && hwif->drives[0].present |
| && hwif->drives[1].present) |
| || !hwif->drives[0].present |
| || !hwif->drives[1].present)) |
| ide_acpi_set_state(hwif, 0); |
| return ret; |
| } |
| |
| static int generic_ide_resume(struct device *dev) |
| { |
| ide_drive_t *drive = dev->driver_data; |
| ide_hwif_t *hwif = HWIF(drive); |
| struct request rq; |
| struct request_pm_state rqpm; |
| ide_task_t args; |
| int err; |
| |
| /* Call ACPI _STM only once */ |
| if (!(drive->dn % 2)) { |
| ide_acpi_set_state(hwif, 1); |
| ide_acpi_push_timing(hwif); |
| } |
| |
| ide_acpi_exec_tfs(drive); |
| |
| memset(&rq, 0, sizeof(rq)); |
| memset(&rqpm, 0, sizeof(rqpm)); |
| memset(&args, 0, sizeof(args)); |
| rq.cmd_type = REQ_TYPE_PM_RESUME; |
| rq.special = &args; |
| rq.data = &rqpm; |
| rqpm.pm_step = ide_pm_state_start_resume; |
| rqpm.pm_state = PM_EVENT_ON; |
| |
| err = ide_do_drive_cmd(drive, &rq, ide_head_wait); |
| |
| if (err == 0 && dev->driver) { |
| ide_driver_t *drv = to_ide_driver(dev->driver); |
| |
| if (drv->resume) |
| drv->resume(drive); |
| } |
| |
| return err; |
| } |
| |
| int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, |
| unsigned int cmd, unsigned long arg) |
| { |
| unsigned long flags; |
| ide_driver_t *drv; |
| void __user *p = (void __user *)arg; |
| int err = 0, (*setfunc)(ide_drive_t *, int); |
| u8 *val; |
| |
| switch (cmd) { |
| case HDIO_GET_32BIT: val = &drive->io_32bit; goto read_val; |
| case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val; |
| case HDIO_GET_UNMASKINTR: val = &drive->unmask; goto read_val; |
| case HDIO_GET_DMA: val = &drive->using_dma; goto read_val; |
| case HDIO_SET_32BIT: setfunc = set_io_32bit; goto set_val; |
| case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings; goto set_val; |
| case HDIO_SET_PIO_MODE: setfunc = set_pio_mode; goto set_val; |
| case HDIO_SET_UNMASKINTR: setfunc = set_unmaskirq; goto set_val; |
| case HDIO_SET_DMA: setfunc = set_using_dma; goto set_val; |
| } |
| |
| switch (cmd) { |
| case HDIO_OBSOLETE_IDENTITY: |
| case HDIO_GET_IDENTITY: |
| if (bdev != bdev->bd_contains) |
| return -EINVAL; |
| if (drive->id_read == 0) |
| return -ENOMSG; |
| if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142)) |
| return -EFAULT; |
| return 0; |
| |
| case HDIO_GET_NICE: |
| return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP | |
| drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP | |
| drive->nice1 << IDE_NICE_1, |
| (long __user *) arg); |
| #ifdef CONFIG_IDE_TASK_IOCTL |
| case HDIO_DRIVE_TASKFILE: |
| if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) |
| return -EACCES; |
| switch(drive->media) { |
| case ide_disk: |
| return ide_taskfile_ioctl(drive, cmd, arg); |
| default: |
| return -ENOMSG; |
| } |
| #endif /* CONFIG_IDE_TASK_IOCTL */ |
| |
| case HDIO_DRIVE_CMD: |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EACCES; |
| return ide_cmd_ioctl(drive, cmd, arg); |
| |
| case HDIO_DRIVE_TASK: |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EACCES; |
| return ide_task_ioctl(drive, cmd, arg); |
| |
| case HDIO_SCAN_HWIF: |
| { |
| hw_regs_t hw; |
| int args[3]; |
| if (!capable(CAP_SYS_RAWIO)) return -EACCES; |
| if (copy_from_user(args, p, 3 * sizeof(int))) |
| return -EFAULT; |
| memset(&hw, 0, sizeof(hw)); |
| ide_init_hwif_ports(&hw, (unsigned long) args[0], |
| (unsigned long) args[1], NULL); |
| hw.irq = args[2]; |
| if (ide_register_hw(&hw, NULL, NULL) == -1) |
| return -EIO; |
| return 0; |
| } |
| case HDIO_UNREGISTER_HWIF: |
| if (!capable(CAP_SYS_RAWIO)) return -EACCES; |
| /* (arg > MAX_HWIFS) checked in function */ |
| ide_unregister(arg, 1, 1); |
| return 0; |
| case HDIO_SET_NICE: |
| if (!capable(CAP_SYS_ADMIN)) return -EACCES; |
| if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1)))) |
| return -EPERM; |
| drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1; |
| drv = *(ide_driver_t **)bdev->bd_disk->private_data; |
| if (drive->dsc_overlap && !drv->supports_dsc_overlap) { |
| drive->dsc_overlap = 0; |
| return -EPERM; |
| } |
| drive->nice1 = (arg >> IDE_NICE_1) & 1; |
| return 0; |
| case HDIO_DRIVE_RESET: |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| /* |
| * Abort the current command on the |
| * group if there is one, taking |
| * care not to allow anything else |
| * to be queued and to die on the |
| * spot if we miss one somehow |
| */ |
| |
| spin_lock_irqsave(&ide_lock, flags); |
| |
| if (HWGROUP(drive)->resetting) { |
| spin_unlock_irqrestore(&ide_lock, flags); |
| return -EBUSY; |
| } |
| |
| ide_abort(drive, "drive reset"); |
| |
| BUG_ON(HWGROUP(drive)->handler); |
| |
| /* Ensure nothing gets queued after we |
| drop the lock. Reset will clear the busy */ |
| |
| HWGROUP(drive)->busy = 1; |
| spin_unlock_irqrestore(&ide_lock, flags); |
| (void) ide_do_reset(drive); |
| |
| return 0; |
| case HDIO_GET_BUSSTATE: |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (put_user(HWIF(drive)->bus_state, (long __user *)arg)) |
| return -EFAULT; |
| return 0; |
| |
| case HDIO_SET_BUSSTATE: |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| return -EOPNOTSUPP; |
| default: |
| return -EINVAL; |
| } |
| |
| read_val: |
| mutex_lock(&ide_setting_mtx); |
| spin_lock_irqsave(&ide_lock, flags); |
| err = *val; |
| spin_unlock_irqrestore(&ide_lock, flags); |
| mutex_unlock(&ide_setting_mtx); |
| return err >= 0 ? put_user(err, (long __user *)arg) : err; |
| |
| set_val: |
| if (bdev != bdev->bd_contains) |
| err = -EINVAL; |
| else { |
| if (!capable(CAP_SYS_ADMIN)) |
| err = -EACCES; |
| else { |
| mutex_lock(&ide_setting_mtx); |
| err = setfunc(drive, arg); |
| mutex_unlock(&ide_setting_mtx); |
| } |
| } |
| return err; |
| } |
| |
| EXPORT_SYMBOL(generic_ide_ioctl); |
| |
| /* |
| * stridx() returns the offset of c within s, |
| * or -1 if c is '\0' or not found within s. |
| */ |
| static int __init stridx (const char *s, char c) |
| { |
| char *i = strchr(s, c); |
| return (i && c) ? i - s : -1; |
| } |
| |
| /* |
| * match_parm() does parsing for ide_setup(): |
| * |
| * 1. the first char of s must be '='. |
| * 2. if the remainder matches one of the supplied keywords, |
| * the index (1 based) of the keyword is negated and returned. |
| * 3. if the remainder is a series of no more than max_vals numbers |
| * separated by commas, the numbers are saved in vals[] and a |
| * count of how many were saved is returned. Base10 is assumed, |
| * and base16 is allowed when prefixed with "0x". |
| * 4. otherwise, zero is returned. |
| */ |
| static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals) |
| { |
| static const char *decimal = "0123456789"; |
| static const char *hex = "0123456789abcdef"; |
| int i, n; |
| |
| if (*s++ == '=') { |
| /* |
| * Try matching against the supplied keywords, |
| * and return -(index+1) if we match one |
| */ |
| if (keywords != NULL) { |
| for (i = 0; *keywords != NULL; ++i) { |
| if (!strcmp(s, *keywords++)) |
| return -(i+1); |
| } |
| } |
| /* |
| * Look for a series of no more than "max_vals" |
| * numeric values separated by commas, in base10, |
| * or base16 when prefixed with "0x". |
| * Return a count of how many were found. |
| */ |
| for (n = 0; (i = stridx(decimal, *s)) >= 0;) { |
| vals[n] = i; |
| while ((i = stridx(decimal, *++s)) >= 0) |
| vals[n] = (vals[n] * 10) + i; |
| if (*s == 'x' && !vals[n]) { |
| while ((i = stridx(hex, *++s)) >= 0) |
| vals[n] = (vals[n] * 0x10) + i; |
| } |
| if (++n == max_vals) |
| break; |
| if (*s == ',' || *s == ';') |
| ++s; |
| } |
| if (!*s) |
| return n; |
| } |
| return 0; /* zero = nothing matched */ |
| } |
| |
| extern int probe_ali14xx; |
| extern int probe_umc8672; |
| extern int probe_dtc2278; |
| extern int probe_ht6560b; |
| extern int probe_qd65xx; |
| extern int cmd640_vlb; |
| |
| static int __initdata is_chipset_set; |
| |
| /* |
| * ide_setup() gets called VERY EARLY during initialization, |
| * to handle kernel "command line" strings beginning with "hdx=" or "ide". |
| * |
| * Remember to update Documentation/ide/ide.txt if you change something here. |
| */ |
| static int __init ide_setup(char *s) |
| { |
| int i, vals[3]; |
| ide_hwif_t *hwif; |
| ide_drive_t *drive; |
| unsigned int hw, unit; |
| const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1); |
| const char max_hwif = '0' + (MAX_HWIFS - 1); |
| |
| |
| if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ |
| return 0; /* driver and not us */ |
| |
| if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2)) |
| return 0; |
| |
| printk(KERN_INFO "ide_setup: %s", s); |
| init_ide_data (); |
| |
| #ifdef CONFIG_BLK_DEV_IDEDOUBLER |
| if (!strcmp(s, "ide=doubler")) { |
| extern int ide_doubler; |
| |
| printk(" : Enabled support for IDE doublers\n"); |
| ide_doubler = 1; |
| return 1; |
| } |
| #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ |
| |
| if (!strcmp(s, "ide=nodma")) { |
| printk(" : Prevented DMA\n"); |
| noautodma = 1; |
| goto obsolete_option; |
| } |
| |
| #ifdef CONFIG_BLK_DEV_IDEACPI |
| if (!strcmp(s, "ide=noacpi")) { |
| //printk(" : Disable IDE ACPI support.\n"); |
| ide_noacpi = 1; |
| return 1; |
| } |
| if (!strcmp(s, "ide=acpigtf")) { |
| //printk(" : Enable IDE ACPI _GTF support.\n"); |
| ide_noacpitfs = 0; |
| return 1; |
| } |
| if (!strcmp(s, "ide=acpionboot")) { |
| //printk(" : Call IDE ACPI methods on boot.\n"); |
| ide_noacpionboot = 0; |
| return 1; |
| } |
| #endif /* CONFIG_BLK_DEV_IDEACPI */ |
| |
| /* |
| * Look for drive options: "hdx=" |
| */ |
| if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { |
| const char *hd_words[] = { |
| "none", "noprobe", "nowerr", "cdrom", "nodma", |
| "autotune", "noautotune", "-8", "-9", "-10", |
| "noflush", "remap", "remap63", "scsi", NULL }; |
| unit = s[2] - 'a'; |
| hw = unit / MAX_DRIVES; |
| unit = unit % MAX_DRIVES; |
| hwif = &ide_hwifs[hw]; |
| drive = &hwif->drives[unit]; |
| if (strncmp(s + 4, "ide-", 4) == 0) { |
| strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req)); |
| goto obsolete_option; |
| } |
| switch (match_parm(&s[3], hd_words, vals, 3)) { |
| case -1: /* "none" */ |
| case -2: /* "noprobe" */ |
| drive->noprobe = 1; |
| goto done; |
| case -3: /* "nowerr" */ |
| drive->bad_wstat = BAD_R_STAT; |
| hwif->noprobe = 0; |
| goto done; |
| case -4: /* "cdrom" */ |
| drive->present = 1; |
| drive->media = ide_cdrom; |
| /* an ATAPI device ignores DRDY */ |
| drive->ready_stat = 0; |
| hwif->noprobe = 0; |
| goto done; |
| case -5: /* nodma */ |
| drive->nodma = 1; |
| goto done; |
| case -6: /* "autotune" */ |
| drive->autotune = IDE_TUNE_AUTO; |
| goto obsolete_option; |
| case -7: /* "noautotune" */ |
| drive->autotune = IDE_TUNE_NOAUTO; |
| goto obsolete_option; |
| case -11: /* noflush */ |
| drive->noflush = 1; |
| goto done; |
| case -12: /* "remap" */ |
| drive->remap_0_to_1 = 1; |
| goto obsolete_option; |
| case -13: /* "remap63" */ |
| drive->sect0 = 63; |
| goto obsolete_option; |
| case -14: /* "scsi" */ |
| drive->scsi = 1; |
| goto obsolete_option; |
| case 3: /* cyl,head,sect */ |
| drive->media = ide_disk; |
| drive->ready_stat = READY_STAT; |
| drive->cyl = drive->bios_cyl = vals[0]; |
| drive->head = drive->bios_head = vals[1]; |
| drive->sect = drive->bios_sect = vals[2]; |
| drive->present = 1; |
| drive->forced_geom = 1; |
| hwif->noprobe = 0; |
| goto done; |
| default: |
| goto bad_option; |
| } |
| } |
| |
| if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e') |
| goto bad_option; |
| /* |
| * Look for bus speed option: "idebus=" |
| */ |
| if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') { |
| if (match_parm(&s[6], NULL, vals, 1) != 1) |
| goto bad_option; |
| if (vals[0] >= 20 && vals[0] <= 66) { |
| idebus_parameter = vals[0]; |
| } else |
| printk(" -- BAD BUS SPEED! Expected value from 20 to 66"); |
| goto done; |
| } |
| /* |
| * Look for interface options: "idex=" |
| */ |
| if (s[3] >= '0' && s[3] <= max_hwif) { |
| /* |
| * Be VERY CAREFUL changing this: note hardcoded indexes below |
| * (-8, -9, -10) are reserved to ease the hardcoding. |
| */ |
| static const char *ide_words[] = { |
| "noprobe", "serialize", "minus3", "minus4", |
| "reset", "minus6", "ata66", "minus8", "minus9", |
| "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb", |
| "dtc2278", "umc8672", "ali14xx", NULL }; |
| |
| hw = s[3] - '0'; |
| hwif = &ide_hwifs[hw]; |
| i = match_parm(&s[4], ide_words, vals, 3); |
| |
| /* |
| * Cryptic check to ensure chipset not already set for hwif. |
| * Note: we can't depend on hwif->chipset here. |
| */ |
| if (i >= -18 && i <= -11) { |
| /* chipset already specified */ |
| if (is_chipset_set) |
| goto bad_option; |
| /* these drivers are for "ide0=" only */ |
| if (hw != 0) |
| goto bad_hwif; |
| is_chipset_set = 1; |
| printk("\n"); |
| } |
| |
| switch (i) { |
| #ifdef CONFIG_BLK_DEV_ALI14XX |
| case -17: /* "ali14xx" */ |
| probe_ali14xx = 1; |
| goto obsolete_option; |
| #endif |
| #ifdef CONFIG_BLK_DEV_UMC8672 |
| case -16: /* "umc8672" */ |
| probe_umc8672 = 1; |
| goto obsolete_option; |
| #endif |
| #ifdef CONFIG_BLK_DEV_DTC2278 |
| case -15: /* "dtc2278" */ |
| probe_dtc2278 = 1; |
| goto obsolete_option; |
| #endif |
| #ifdef CONFIG_BLK_DEV_CMD640 |
| case -14: /* "cmd640_vlb" */ |
| cmd640_vlb = 1; |
| goto obsolete_option; |
| #endif |
| #ifdef CONFIG_BLK_DEV_HT6560B |
| case -13: /* "ht6560b" */ |
| probe_ht6560b = 1; |
| goto obsolete_option; |
| #endif |
| #ifdef CONFIG_BLK_DEV_QD65XX |
| case -12: /* "qd65xx" */ |
| probe_qd65xx = 1; |
| goto obsolete_option; |
| #endif |
| #ifdef CONFIG_BLK_DEV_4DRIVES |
| case -11: /* "four" drives on one set of ports */ |
| { |
| ide_hwif_t *mate = &ide_hwifs[hw^1]; |
| mate->drives[0].select.all ^= 0x20; |
| mate->drives[1].select.all ^= 0x20; |
| hwif->chipset = mate->chipset = ide_4drives; |
| mate->irq = hwif->irq; |
| memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports)); |
| hwif->mate = mate; |
| mate->mate = hwif; |
| hwif->serialized = mate->serialized = 1; |
| goto obsolete_option; |
| } |
| #endif /* CONFIG_BLK_DEV_4DRIVES */ |
| case -10: /* minus10 */ |
| case -9: /* minus9 */ |
| case -8: /* minus8 */ |
| case -6: |
| case -4: |
| case -3: |
| goto bad_option; |
| case -7: /* ata66 */ |
| #ifdef CONFIG_BLK_DEV_IDEPCI |
| /* |
| * Use ATA_CBL_PATA40_SHORT so drive side |
| * cable detection is also overriden. |
| */ |
| hwif->cbl = ATA_CBL_PATA40_SHORT; |
| goto obsolete_option; |
| #else |
| goto bad_hwif; |
| #endif |
| case -5: /* "reset" */ |
| hwif->reset = 1; |
| goto obsolete_option; |
| case -2: /* "serialize" */ |
| hwif->mate = &ide_hwifs[hw^1]; |
| hwif->mate->mate = hwif; |
| hwif->serialized = hwif->mate->serialized = 1; |
| goto obsolete_option; |
| |
| case -1: /* "noprobe" */ |
| hwif->noprobe = 1; |
| goto obsolete_option; |
| case 0: |
| case 1: |
| case 2: |
| case 3: |
| goto bad_option; |
| default: |
| printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n"); |
| return 1; |
| } |
| } |
| bad_option: |
| printk(" -- BAD OPTION\n"); |
| return 1; |
| obsolete_option: |
| printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n"); |
| return 1; |
| bad_hwif: |
| printk("-- NOT SUPPORTED ON ide%d", hw); |
| done: |
| printk("\n"); |
| return 1; |
| } |
| |
| EXPORT_SYMBOL(ide_lock); |
| |
| static int ide_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| return 1; |
| } |
| |
| static char *media_string(ide_drive_t *drive) |
| { |
| switch (drive->media) { |
| case ide_disk: |
| return "disk"; |
| case ide_cdrom: |
| return "cdrom"; |
| case ide_tape: |
| return "tape"; |
| case ide_floppy: |
| return "floppy"; |
| case ide_optical: |
| return "optical"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| return sprintf(buf, "%s\n", media_string(drive)); |
| } |
| |
| static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| return sprintf(buf, "%s\n", drive->name); |
| } |
| |
| static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| return sprintf(buf, "ide:m-%s\n", media_string(drive)); |
| } |
| |
| static ssize_t model_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| return sprintf(buf, "%s\n", drive->id->model); |
| } |
| |
| static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| return sprintf(buf, "%s\n", drive->id->fw_rev); |
| } |
| |
| static ssize_t serial_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| return sprintf(buf, "%s\n", drive->id->serial_no); |
| } |
| |
| static struct device_attribute ide_dev_attrs[] = { |
| __ATTR_RO(media), |
| __ATTR_RO(drivename), |
| __ATTR_RO(modalias), |
| __ATTR_RO(model), |
| __ATTR_RO(firmware), |
| __ATTR(serial, 0400, serial_show, NULL), |
| __ATTR_NULL |
| }; |
| |
| static int ide_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| |
| add_uevent_var(env, "MEDIA=%s", media_string(drive)); |
| add_uevent_var(env, "DRIVENAME=%s", drive->name); |
| add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive)); |
| return 0; |
| } |
| |
| static int generic_ide_probe(struct device *dev) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| ide_driver_t *drv = to_ide_driver(dev->driver); |
| |
| return drv->probe ? drv->probe(drive) : -ENODEV; |
| } |
| |
| static int generic_ide_remove(struct device *dev) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| ide_driver_t *drv = to_ide_driver(dev->driver); |
| |
| if (drv->remove) |
| drv->remove(drive); |
| |
| return 0; |
| } |
| |
| static void generic_ide_shutdown(struct device *dev) |
| { |
| ide_drive_t *drive = to_ide_device(dev); |
| ide_driver_t *drv = to_ide_driver(dev->driver); |
| |
| if (dev->driver && drv->shutdown) |
| drv->shutdown(drive); |
| } |
| |
| struct bus_type ide_bus_type = { |
| .name = "ide", |
| .match = ide_bus_match, |
| .uevent = ide_uevent, |
| .probe = generic_ide_probe, |
| .remove = generic_ide_remove, |
| .shutdown = generic_ide_shutdown, |
| .dev_attrs = ide_dev_attrs, |
| .suspend = generic_ide_suspend, |
| .resume = generic_ide_resume, |
| }; |
| |
| EXPORT_SYMBOL_GPL(ide_bus_type); |
| |
| static void ide_port_class_release(struct device *portdev) |
| { |
| ide_hwif_t *hwif = dev_get_drvdata(portdev); |
| |
| put_device(&hwif->gendev); |
| } |
| |
| /* |
| * This is gets invoked once during initialization, to set *everything* up |
| */ |
| static int __init ide_init(void) |
| { |
| int ret; |
| |
| printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); |
| system_bus_speed = ide_system_bus_speed(); |
| |
| printk(KERN_INFO "ide: Assuming %dMHz system bus speed " |
| "for PIO modes%s\n", system_bus_speed, |
| idebus_parameter ? "" : "; override with idebus=xx"); |
| |
| ret = bus_register(&ide_bus_type); |
| if (ret < 0) { |
| printk(KERN_WARNING "IDE: bus_register error: %d\n", ret); |
| return ret; |
| } |
| |
| ide_port_class = class_create(THIS_MODULE, "ide_port"); |
| if (IS_ERR(ide_port_class)) { |
| ret = PTR_ERR(ide_port_class); |
| goto out_port_class; |
| } |
| ide_port_class->dev_release = ide_port_class_release; |
| |
| init_ide_data(); |
| |
| proc_ide_create(); |
| |
| return 0; |
| |
| out_port_class: |
| bus_unregister(&ide_bus_type); |
| |
| return ret; |
| } |
| |
| #ifdef MODULE |
| static char *options = NULL; |
| module_param(options, charp, 0); |
| MODULE_LICENSE("GPL"); |
| |
| static void __init parse_options (char *line) |
| { |
| char *next = line; |
| |
| if (line == NULL || !*line) |
| return; |
| while ((line = next) != NULL) { |
| if ((next = strchr(line,' ')) != NULL) |
| *next++ = 0; |
| if (!ide_setup(line)) |
| printk (KERN_INFO "Unknown option '%s'\n", line); |
| } |
| } |
| |
| int __init init_module (void) |
| { |
| parse_options(options); |
| return ide_init(); |
| } |
| |
| void __exit cleanup_module (void) |
| { |
| int index; |
| |
| for (index = 0; index < MAX_HWIFS; ++index) |
| ide_unregister(index, 0, 0); |
| |
| proc_ide_destroy(); |
| |
| class_destroy(ide_port_class); |
| |
| bus_unregister(&ide_bus_type); |
| } |
| |
| #else /* !MODULE */ |
| |
| __setup("", ide_setup); |
| |
| module_init(ide_init); |
| |
| #endif /* MODULE */ |