| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. |
| * |
| */ |
| #ifndef _MHI_H_ |
| #define _MHI_H_ |
| |
| #include <linux/device.h> |
| #include <linux/dma-direction.h> |
| #include <linux/mutex.h> |
| #include <linux/rwlock_types.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock_types.h> |
| #include <linux/wait.h> |
| #include <linux/workqueue.h> |
| |
| struct mhi_chan; |
| struct mhi_event; |
| struct mhi_ctxt; |
| struct mhi_cmd; |
| struct mhi_buf_info; |
| |
| /** |
| * enum mhi_callback - MHI callback |
| * @MHI_CB_IDLE: MHI entered idle state |
| * @MHI_CB_PENDING_DATA: New data available for client to process |
| * @MHI_CB_LPM_ENTER: MHI host entered low power mode |
| * @MHI_CB_LPM_EXIT: MHI host about to exit low power mode |
| * @MHI_CB_EE_RDDM: MHI device entered RDDM exec env |
| * @MHI_CB_EE_MISSION_MODE: MHI device entered Mission Mode exec env |
| * @MHI_CB_SYS_ERROR: MHI device entered error state (may recover) |
| * @MHI_CB_FATAL_ERROR: MHI device entered fatal error state |
| * @MHI_CB_BW_REQ: Received a bandwidth switch request from device |
| */ |
| enum mhi_callback { |
| MHI_CB_IDLE, |
| MHI_CB_PENDING_DATA, |
| MHI_CB_LPM_ENTER, |
| MHI_CB_LPM_EXIT, |
| MHI_CB_EE_RDDM, |
| MHI_CB_EE_MISSION_MODE, |
| MHI_CB_SYS_ERROR, |
| MHI_CB_FATAL_ERROR, |
| MHI_CB_BW_REQ, |
| }; |
| |
| /** |
| * enum mhi_flags - Transfer flags |
| * @MHI_EOB: End of buffer for bulk transfer |
| * @MHI_EOT: End of transfer |
| * @MHI_CHAIN: Linked transfer |
| */ |
| enum mhi_flags { |
| MHI_EOB = BIT(0), |
| MHI_EOT = BIT(1), |
| MHI_CHAIN = BIT(2), |
| }; |
| |
| /** |
| * enum mhi_device_type - Device types |
| * @MHI_DEVICE_XFER: Handles data transfer |
| * @MHI_DEVICE_CONTROLLER: Control device |
| */ |
| enum mhi_device_type { |
| MHI_DEVICE_XFER, |
| MHI_DEVICE_CONTROLLER, |
| }; |
| |
| /** |
| * enum mhi_ch_type - Channel types |
| * @MHI_CH_TYPE_INVALID: Invalid channel type |
| * @MHI_CH_TYPE_OUTBOUND: Outbound channel to the device |
| * @MHI_CH_TYPE_INBOUND: Inbound channel from the device |
| * @MHI_CH_TYPE_INBOUND_COALESCED: Coalesced channel for the device to combine |
| * multiple packets and send them as a single |
| * large packet to reduce CPU consumption |
| */ |
| enum mhi_ch_type { |
| MHI_CH_TYPE_INVALID = 0, |
| MHI_CH_TYPE_OUTBOUND = DMA_TO_DEVICE, |
| MHI_CH_TYPE_INBOUND = DMA_FROM_DEVICE, |
| MHI_CH_TYPE_INBOUND_COALESCED = 3, |
| }; |
| |
| /** |
| * struct image_info - Firmware and RDDM table table |
| * @mhi_buf - Buffer for firmware and RDDM table |
| * @entries - # of entries in table |
| */ |
| struct image_info { |
| struct mhi_buf *mhi_buf; |
| struct bhi_vec_entry *bhi_vec; |
| u32 entries; |
| }; |
| |
| /** |
| * struct mhi_link_info - BW requirement |
| * target_link_speed - Link speed as defined by TLS bits in LinkControl reg |
| * target_link_width - Link width as defined by NLW bits in LinkStatus reg |
| */ |
| struct mhi_link_info { |
| unsigned int target_link_speed; |
| unsigned int target_link_width; |
| }; |
| |
| /** |
| * enum mhi_ee_type - Execution environment types |
| * @MHI_EE_PBL: Primary Bootloader |
| * @MHI_EE_SBL: Secondary Bootloader |
| * @MHI_EE_AMSS: Modem, aka the primary runtime EE |
| * @MHI_EE_RDDM: Ram dump download mode |
| * @MHI_EE_WFW: WLAN firmware mode |
| * @MHI_EE_PTHRU: Passthrough |
| * @MHI_EE_EDL: Embedded downloader |
| */ |
| enum mhi_ee_type { |
| MHI_EE_PBL, |
| MHI_EE_SBL, |
| MHI_EE_AMSS, |
| MHI_EE_RDDM, |
| MHI_EE_WFW, |
| MHI_EE_PTHRU, |
| MHI_EE_EDL, |
| MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, |
| MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */ |
| MHI_EE_NOT_SUPPORTED, |
| MHI_EE_MAX, |
| }; |
| |
| /** |
| * enum mhi_state - MHI states |
| * @MHI_STATE_RESET: Reset state |
| * @MHI_STATE_READY: Ready state |
| * @MHI_STATE_M0: M0 state |
| * @MHI_STATE_M1: M1 state |
| * @MHI_STATE_M2: M2 state |
| * @MHI_STATE_M3: M3 state |
| * @MHI_STATE_M3_FAST: M3 Fast state |
| * @MHI_STATE_BHI: BHI state |
| * @MHI_STATE_SYS_ERR: System Error state |
| */ |
| enum mhi_state { |
| MHI_STATE_RESET = 0x0, |
| MHI_STATE_READY = 0x1, |
| MHI_STATE_M0 = 0x2, |
| MHI_STATE_M1 = 0x3, |
| MHI_STATE_M2 = 0x4, |
| MHI_STATE_M3 = 0x5, |
| MHI_STATE_M3_FAST = 0x6, |
| MHI_STATE_BHI = 0x7, |
| MHI_STATE_SYS_ERR = 0xFF, |
| MHI_STATE_MAX, |
| }; |
| |
| /** |
| * enum mhi_ch_ee_mask - Execution environment mask for channel |
| * @MHI_CH_EE_PBL: Allow channel to be used in PBL EE |
| * @MHI_CH_EE_SBL: Allow channel to be used in SBL EE |
| * @MHI_CH_EE_AMSS: Allow channel to be used in AMSS EE |
| * @MHI_CH_EE_RDDM: Allow channel to be used in RDDM EE |
| * @MHI_CH_EE_PTHRU: Allow channel to be used in PTHRU EE |
| * @MHI_CH_EE_WFW: Allow channel to be used in WFW EE |
| * @MHI_CH_EE_EDL: Allow channel to be used in EDL EE |
| */ |
| enum mhi_ch_ee_mask { |
| MHI_CH_EE_PBL = BIT(MHI_EE_PBL), |
| MHI_CH_EE_SBL = BIT(MHI_EE_SBL), |
| MHI_CH_EE_AMSS = BIT(MHI_EE_AMSS), |
| MHI_CH_EE_RDDM = BIT(MHI_EE_RDDM), |
| MHI_CH_EE_PTHRU = BIT(MHI_EE_PTHRU), |
| MHI_CH_EE_WFW = BIT(MHI_EE_WFW), |
| MHI_CH_EE_EDL = BIT(MHI_EE_EDL), |
| }; |
| |
| /** |
| * enum mhi_er_data_type - Event ring data types |
| * @MHI_ER_DATA: Only client data over this ring |
| * @MHI_ER_CTRL: MHI control data and client data |
| */ |
| enum mhi_er_data_type { |
| MHI_ER_DATA, |
| MHI_ER_CTRL, |
| }; |
| |
| /** |
| * enum mhi_db_brst_mode - Doorbell mode |
| * @MHI_DB_BRST_DISABLE: Burst mode disable |
| * @MHI_DB_BRST_ENABLE: Burst mode enable |
| */ |
| enum mhi_db_brst_mode { |
| MHI_DB_BRST_DISABLE = 0x2, |
| MHI_DB_BRST_ENABLE = 0x3, |
| }; |
| |
| /** |
| * struct mhi_channel_config - Channel configuration structure for controller |
| * @name: The name of this channel |
| * @num: The number assigned to this channel |
| * @num_elements: The number of elements that can be queued to this channel |
| * @local_elements: The local ring length of the channel |
| * @event_ring: The event rung index that services this channel |
| * @dir: Direction that data may flow on this channel |
| * @type: Channel type |
| * @ee_mask: Execution Environment mask for this channel |
| * @pollcfg: Polling configuration for burst mode. 0 is default. milliseconds |
| for UL channels, multiple of 8 ring elements for DL channels |
| * @doorbell: Doorbell mode |
| * @lpm_notify: The channel master requires low power mode notifications |
| * @offload_channel: The client manages the channel completely |
| * @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition |
| * @auto_queue: Framework will automatically queue buffers for DL traffic |
| * @auto_start: Automatically start (open) this channel |
| * @wake-capable: Channel capable of waking up the system |
| */ |
| struct mhi_channel_config { |
| char *name; |
| u32 num; |
| u32 num_elements; |
| u32 local_elements; |
| u32 event_ring; |
| enum dma_data_direction dir; |
| enum mhi_ch_type type; |
| u32 ee_mask; |
| u32 pollcfg; |
| enum mhi_db_brst_mode doorbell; |
| bool lpm_notify; |
| bool offload_channel; |
| bool doorbell_mode_switch; |
| bool auto_queue; |
| bool auto_start; |
| bool wake_capable; |
| }; |
| |
| /** |
| * struct mhi_event_config - Event ring configuration structure for controller |
| * @num_elements: The number of elements that can be queued to this ring |
| * @irq_moderation_ms: Delay irq for additional events to be aggregated |
| * @irq: IRQ associated with this ring |
| * @channel: Dedicated channel number. U32_MAX indicates a non-dedicated ring |
| * @priority: Priority of this ring. Use 1 for now |
| * @mode: Doorbell mode |
| * @data_type: Type of data this ring will process |
| * @hardware_event: This ring is associated with hardware channels |
| * @client_managed: This ring is client managed |
| * @offload_channel: This ring is associated with an offloaded channel |
| */ |
| struct mhi_event_config { |
| u32 num_elements; |
| u32 irq_moderation_ms; |
| u32 irq; |
| u32 channel; |
| u32 priority; |
| enum mhi_db_brst_mode mode; |
| enum mhi_er_data_type data_type; |
| bool hardware_event; |
| bool client_managed; |
| bool offload_channel; |
| }; |
| |
| /** |
| * struct mhi_controller_config - Root MHI controller configuration |
| * @max_channels: Maximum number of channels supported |
| * @timeout_ms: Timeout value for operations. 0 means use default |
| * @buf_len: Size of automatically allocated buffers. 0 means use default |
| * @num_channels: Number of channels defined in @ch_cfg |
| * @ch_cfg: Array of defined channels |
| * @num_events: Number of event rings defined in @event_cfg |
| * @event_cfg: Array of defined event rings |
| * @use_bounce_buf: Use a bounce buffer pool due to limited DDR access |
| * @m2_no_db: Host is not allowed to ring DB in M2 state |
| */ |
| struct mhi_controller_config { |
| u32 max_channels; |
| u32 timeout_ms; |
| u32 buf_len; |
| u32 num_channels; |
| struct mhi_channel_config *ch_cfg; |
| u32 num_events; |
| struct mhi_event_config *event_cfg; |
| bool use_bounce_buf; |
| bool m2_no_db; |
| }; |
| |
| /** |
| * struct mhi_controller - Master MHI controller structure |
| * @cntrl_dev: Pointer to the struct device of physical bus acting as the MHI |
| * controller (required) |
| * @mhi_dev: MHI device instance for the controller |
| * @regs: Base address of MHI MMIO register space (required) |
| * @bhi: Points to base of MHI BHI register space |
| * @bhie: Points to base of MHI BHIe register space |
| * @wake_db: MHI WAKE doorbell register address |
| * @iova_start: IOMMU starting address for data (required) |
| * @iova_stop: IOMMU stop address for data (required) |
| * @fw_image: Firmware image name for normal booting (required) |
| * @edl_image: Firmware image name for emergency download mode (optional) |
| * @rddm_size: RAM dump size that host should allocate for debugging purpose |
| * @sbl_size: SBL image size downloaded through BHIe (optional) |
| * @seg_len: BHIe vector size (optional) |
| * @fbc_image: Points to firmware image buffer |
| * @rddm_image: Points to RAM dump buffer |
| * @mhi_chan: Points to the channel configuration table |
| * @lpm_chans: List of channels that require LPM notifications |
| * @irq: base irq # to request (required) |
| * @max_chan: Maximum number of channels the controller supports |
| * @total_ev_rings: Total # of event rings allocated |
| * @hw_ev_rings: Number of hardware event rings |
| * @sw_ev_rings: Number of software event rings |
| * @nr_irqs_req: Number of IRQs required to operate (optional) |
| * @nr_irqs: Number of IRQ allocated by bus master (required) |
| * @family_number: MHI controller family number |
| * @device_number: MHI controller device number |
| * @major_version: MHI controller major revision number |
| * @minor_version: MHI controller minor revision number |
| * @mhi_event: MHI event ring configurations table |
| * @mhi_cmd: MHI command ring configurations table |
| * @mhi_ctxt: MHI device context, shared memory between host and device |
| * @pm_mutex: Mutex for suspend/resume operation |
| * @pm_lock: Lock for protecting MHI power management state |
| * @timeout_ms: Timeout in ms for state transitions |
| * @pm_state: MHI power management state |
| * @db_access: DB access states |
| * @ee: MHI device execution environment |
| * @dev_state: MHI device state |
| * @dev_wake: Device wakeup count |
| * @pending_pkts: Pending packets for the controller |
| * @transition_list: List of MHI state transitions |
| * @transition_lock: Lock for protecting MHI state transition list |
| * @wlock: Lock for protecting device wakeup |
| * @mhi_link_info: Device bandwidth info |
| * @st_worker: State transition worker |
| * @fw_worker: Firmware download worker |
| * @syserr_worker: System error worker |
| * @state_event: State change event |
| * @status_cb: CB function to notify power states of the device (required) |
| * @wake_get: CB function to assert device wake (optional) |
| * @wake_put: CB function to de-assert device wake (optional) |
| * @wake_toggle: CB function to assert and de-assert device wake (optional) |
| * @runtime_get: CB function to controller runtime resume (required) |
| * @runtime_put: CB function to decrement pm usage (required) |
| * @map_single: CB function to create TRE buffer |
| * @unmap_single: CB function to destroy TRE buffer |
| * @read_reg: Read a MHI register via the physical link (required) |
| * @write_reg: Write a MHI register via the physical link (required) |
| * @buffer_len: Bounce buffer length |
| * @bounce_buf: Use of bounce buffer |
| * @fbc_download: MHI host needs to do complete image transfer (optional) |
| * @pre_init: MHI host needs to do pre-initialization before power up |
| * @wake_set: Device wakeup set flag |
| * |
| * Fields marked as (required) need to be populated by the controller driver |
| * before calling mhi_register_controller(). For the fields marked as (optional) |
| * they can be populated depending on the usecase. |
| * |
| * The following fields are present for the purpose of implementing any device |
| * specific quirks or customizations for specific MHI revisions used in device |
| * by the controller drivers. The MHI stack will just populate these fields |
| * during mhi_register_controller(): |
| * family_number |
| * device_number |
| * major_version |
| * minor_version |
| */ |
| struct mhi_controller { |
| struct device *cntrl_dev; |
| struct mhi_device *mhi_dev; |
| void __iomem *regs; |
| void __iomem *bhi; |
| void __iomem *bhie; |
| void __iomem *wake_db; |
| |
| dma_addr_t iova_start; |
| dma_addr_t iova_stop; |
| const char *fw_image; |
| const char *edl_image; |
| size_t rddm_size; |
| size_t sbl_size; |
| size_t seg_len; |
| struct image_info *fbc_image; |
| struct image_info *rddm_image; |
| struct mhi_chan *mhi_chan; |
| struct list_head lpm_chans; |
| int *irq; |
| u32 max_chan; |
| u32 total_ev_rings; |
| u32 hw_ev_rings; |
| u32 sw_ev_rings; |
| u32 nr_irqs_req; |
| u32 nr_irqs; |
| u32 family_number; |
| u32 device_number; |
| u32 major_version; |
| u32 minor_version; |
| |
| struct mhi_event *mhi_event; |
| struct mhi_cmd *mhi_cmd; |
| struct mhi_ctxt *mhi_ctxt; |
| |
| struct mutex pm_mutex; |
| rwlock_t pm_lock; |
| u32 timeout_ms; |
| u32 pm_state; |
| u32 db_access; |
| enum mhi_ee_type ee; |
| enum mhi_state dev_state; |
| atomic_t dev_wake; |
| atomic_t pending_pkts; |
| struct list_head transition_list; |
| spinlock_t transition_lock; |
| spinlock_t wlock; |
| struct mhi_link_info mhi_link_info; |
| struct work_struct st_worker; |
| struct work_struct fw_worker; |
| struct work_struct syserr_worker; |
| wait_queue_head_t state_event; |
| |
| void (*status_cb)(struct mhi_controller *mhi_cntrl, |
| enum mhi_callback cb); |
| void (*wake_get)(struct mhi_controller *mhi_cntrl, bool override); |
| void (*wake_put)(struct mhi_controller *mhi_cntrl, bool override); |
| void (*wake_toggle)(struct mhi_controller *mhi_cntrl); |
| int (*runtime_get)(struct mhi_controller *mhi_cntrl); |
| void (*runtime_put)(struct mhi_controller *mhi_cntrl); |
| int (*map_single)(struct mhi_controller *mhi_cntrl, |
| struct mhi_buf_info *buf); |
| void (*unmap_single)(struct mhi_controller *mhi_cntrl, |
| struct mhi_buf_info *buf); |
| int (*read_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr, |
| u32 *out); |
| void (*write_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr, |
| u32 val); |
| |
| size_t buffer_len; |
| bool bounce_buf; |
| bool fbc_download; |
| bool pre_init; |
| bool wake_set; |
| }; |
| |
| /** |
| * struct mhi_device - Structure representing a MHI device which binds |
| * to channels |
| * @id: Pointer to MHI device ID struct |
| * @chan_name: Name of the channel to which the device binds |
| * @mhi_cntrl: Controller the device belongs to |
| * @ul_chan: UL channel for the device |
| * @dl_chan: DL channel for the device |
| * @dev: Driver model device node for the MHI device |
| * @dev_type: MHI device type |
| * @ul_chan_id: MHI channel id for UL transfer |
| * @dl_chan_id: MHI channel id for DL transfer |
| * @dev_wake: Device wakeup counter |
| */ |
| struct mhi_device { |
| const struct mhi_device_id *id; |
| const char *chan_name; |
| struct mhi_controller *mhi_cntrl; |
| struct mhi_chan *ul_chan; |
| struct mhi_chan *dl_chan; |
| struct device dev; |
| enum mhi_device_type dev_type; |
| int ul_chan_id; |
| int dl_chan_id; |
| u32 dev_wake; |
| }; |
| |
| /** |
| * struct mhi_result - Completed buffer information |
| * @buf_addr: Address of data buffer |
| * @bytes_xferd: # of bytes transferred |
| * @dir: Channel direction |
| * @transaction_status: Status of last transaction |
| */ |
| struct mhi_result { |
| void *buf_addr; |
| size_t bytes_xferd; |
| enum dma_data_direction dir; |
| int transaction_status; |
| }; |
| |
| /** |
| * struct mhi_buf - MHI Buffer description |
| * @buf: Virtual address of the buffer |
| * @name: Buffer label. For offload channel, configurations name must be: |
| * ECA - Event context array data |
| * CCA - Channel context array data |
| * @dma_addr: IOMMU address of the buffer |
| * @len: # of bytes |
| */ |
| struct mhi_buf { |
| void *buf; |
| const char *name; |
| dma_addr_t dma_addr; |
| size_t len; |
| }; |
| |
| /** |
| * struct mhi_driver - Structure representing a MHI client driver |
| * @probe: CB function for client driver probe function |
| * @remove: CB function for client driver remove function |
| * @ul_xfer_cb: CB function for UL data transfer |
| * @dl_xfer_cb: CB function for DL data transfer |
| * @status_cb: CB functions for asynchronous status |
| * @driver: Device driver model driver |
| */ |
| struct mhi_driver { |
| const struct mhi_device_id *id_table; |
| int (*probe)(struct mhi_device *mhi_dev, |
| const struct mhi_device_id *id); |
| void (*remove)(struct mhi_device *mhi_dev); |
| void (*ul_xfer_cb)(struct mhi_device *mhi_dev, |
| struct mhi_result *result); |
| void (*dl_xfer_cb)(struct mhi_device *mhi_dev, |
| struct mhi_result *result); |
| void (*status_cb)(struct mhi_device *mhi_dev, enum mhi_callback mhi_cb); |
| struct device_driver driver; |
| }; |
| |
| #define to_mhi_driver(drv) container_of(drv, struct mhi_driver, driver) |
| #define to_mhi_device(dev) container_of(dev, struct mhi_device, dev) |
| |
| /** |
| * mhi_register_controller - Register MHI controller |
| * @mhi_cntrl: MHI controller to register |
| * @config: Configuration to use for the controller |
| */ |
| int mhi_register_controller(struct mhi_controller *mhi_cntrl, |
| struct mhi_controller_config *config); |
| |
| /** |
| * mhi_unregister_controller - Unregister MHI controller |
| * @mhi_cntrl: MHI controller to unregister |
| */ |
| void mhi_unregister_controller(struct mhi_controller *mhi_cntrl); |
| |
| /* |
| * module_mhi_driver() - Helper macro for drivers that don't do |
| * anything special other than using default mhi_driver_register() and |
| * mhi_driver_unregister(). This eliminates a lot of boilerplate. |
| * Each module may only use this macro once. |
| */ |
| #define module_mhi_driver(mhi_drv) \ |
| module_driver(mhi_drv, mhi_driver_register, \ |
| mhi_driver_unregister) |
| |
| /* |
| * Macro to avoid include chaining to get THIS_MODULE |
| */ |
| #define mhi_driver_register(mhi_drv) \ |
| __mhi_driver_register(mhi_drv, THIS_MODULE) |
| |
| /** |
| * __mhi_driver_register - Register driver with MHI framework |
| * @mhi_drv: Driver associated with the device |
| * @owner: The module owner |
| */ |
| int __mhi_driver_register(struct mhi_driver *mhi_drv, struct module *owner); |
| |
| /** |
| * mhi_driver_unregister - Unregister a driver for mhi_devices |
| * @mhi_drv: Driver associated with the device |
| */ |
| void mhi_driver_unregister(struct mhi_driver *mhi_drv); |
| |
| /** |
| * mhi_set_mhi_state - Set MHI device state |
| * @mhi_cntrl: MHI controller |
| * @state: State to set |
| */ |
| void mhi_set_mhi_state(struct mhi_controller *mhi_cntrl, |
| enum mhi_state state); |
| |
| /** |
| * mhi_prepare_for_power_up - Do pre-initialization before power up. |
| * This is optional, call this before power up if |
| * the controller does not want bus framework to |
| * automatically free any allocated memory during |
| * shutdown process. |
| * @mhi_cntrl: MHI controller |
| */ |
| int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl); |
| |
| /** |
| * mhi_async_power_up - Start MHI power up sequence |
| * @mhi_cntrl: MHI controller |
| */ |
| int mhi_async_power_up(struct mhi_controller *mhi_cntrl); |
| |
| /** |
| * mhi_sync_power_up - Start MHI power up sequence and wait till the device |
| * device enters valid EE state |
| * @mhi_cntrl: MHI controller |
| */ |
| int mhi_sync_power_up(struct mhi_controller *mhi_cntrl); |
| |
| /** |
| * mhi_power_down - Start MHI power down sequence |
| * @mhi_cntrl: MHI controller |
| * @graceful: Link is still accessible, so do a graceful shutdown process |
| */ |
| void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful); |
| |
| /** |
| * mhi_unprepare_after_power_down - Free any allocated memory after power down |
| * @mhi_cntrl: MHI controller |
| */ |
| void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl); |
| |
| /** |
| * mhi_download_rddm_img - Download ramdump image from device for |
| * debugging purpose. |
| * @mhi_cntrl: MHI controller |
| * @in_panic: Download rddm image during kernel panic |
| */ |
| int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic); |
| |
| /** |
| * mhi_force_rddm_mode - Force device into rddm mode |
| * @mhi_cntrl: MHI controller |
| */ |
| int mhi_force_rddm_mode(struct mhi_controller *mhi_cntrl); |
| |
| /** |
| * mhi_get_mhi_state - Get MHI state of the device |
| * @mhi_cntrl: MHI controller |
| */ |
| enum mhi_state mhi_get_mhi_state(struct mhi_controller *mhi_cntrl); |
| |
| /** |
| * mhi_device_get - Disable device low power mode |
| * @mhi_dev: Device associated with the channel |
| */ |
| void mhi_device_get(struct mhi_device *mhi_dev); |
| |
| /** |
| * mhi_device_get_sync - Disable device low power mode. Synchronously |
| * take the controller out of suspended state |
| * @mhi_dev: Device associated with the channel |
| */ |
| int mhi_device_get_sync(struct mhi_device *mhi_dev); |
| |
| /** |
| * mhi_device_put - Re-enable device low power mode |
| * @mhi_dev: Device associated with the channel |
| */ |
| void mhi_device_put(struct mhi_device *mhi_dev); |
| |
| /** |
| * mhi_prepare_for_transfer - Setup channel for data transfer |
| * @mhi_dev: Device associated with the channels |
| */ |
| int mhi_prepare_for_transfer(struct mhi_device *mhi_dev); |
| |
| /** |
| * mhi_unprepare_from_transfer - Unprepare the channels |
| * @mhi_dev: Device associated with the channels |
| */ |
| void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev); |
| |
| /** |
| * mhi_poll - Poll for any available data in DL direction |
| * @mhi_dev: Device associated with the channels |
| * @budget: # of events to process |
| */ |
| int mhi_poll(struct mhi_device *mhi_dev, u32 budget); |
| |
| /** |
| * mhi_queue_dma - Send or receive DMA mapped buffers from client device |
| * over MHI channel |
| * @mhi_dev: Device associated with the channels |
| * @dir: DMA direction for the channel |
| * @mhi_buf: Buffer for holding the DMA mapped data |
| * @len: Buffer length |
| * @mflags: MHI transfer flags used for the transfer |
| */ |
| int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir, |
| struct mhi_buf *mhi_buf, size_t len, enum mhi_flags mflags); |
| |
| /** |
| * mhi_queue_buf - Send or receive raw buffers from client device over MHI |
| * channel |
| * @mhi_dev: Device associated with the channels |
| * @dir: DMA direction for the channel |
| * @buf: Buffer for holding the data |
| * @len: Buffer length |
| * @mflags: MHI transfer flags used for the transfer |
| */ |
| int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir, |
| void *buf, size_t len, enum mhi_flags mflags); |
| |
| /** |
| * mhi_queue_skb - Send or receive SKBs from client device over MHI channel |
| * @mhi_dev: Device associated with the channels |
| * @dir: DMA direction for the channel |
| * @skb: Buffer for holding SKBs |
| * @len: Buffer length |
| * @mflags: MHI transfer flags used for the transfer |
| */ |
| int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir, |
| struct sk_buff *skb, size_t len, enum mhi_flags mflags); |
| |
| #endif /* _MHI_H_ */ |