| /* |
| * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. |
| * |
| * Copyright (C) 2005 James Chapman (ds1337 core) |
| * Copyright (C) 2006 David Brownell |
| * Copyright (C) 2009 Matthias Fuchs (rx8025 support) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/string.h> |
| #include <linux/rtc.h> |
| #include <linux/bcd.h> |
| |
| |
| |
| /* We can't determine type by probing, but if we expect pre-Linux code |
| * to have set the chip up as a clock (turning on the oscillator and |
| * setting the date and time), Linux can ignore the non-clock features. |
| * That's a natural job for a factory or repair bench. |
| */ |
| enum ds_type { |
| ds_1307, |
| ds_1337, |
| ds_1338, |
| ds_1339, |
| ds_1340, |
| ds_1388, |
| ds_3231, |
| m41t00, |
| mcp7941x, |
| rx_8025, |
| last_ds_type /* always last */ |
| // rs5c372 too? different address... |
| }; |
| |
| |
| /* RTC registers don't differ much, except for the century flag */ |
| #define DS1307_REG_SECS 0x00 /* 00-59 */ |
| # define DS1307_BIT_CH 0x80 |
| # define DS1340_BIT_nEOSC 0x80 |
| # define MCP7941X_BIT_ST 0x80 |
| #define DS1307_REG_MIN 0x01 /* 00-59 */ |
| #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */ |
| # define DS1307_BIT_12HR 0x40 /* in REG_HOUR */ |
| # define DS1307_BIT_PM 0x20 /* in REG_HOUR */ |
| # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */ |
| # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */ |
| #define DS1307_REG_WDAY 0x03 /* 01-07 */ |
| # define MCP7941X_BIT_VBATEN 0x08 |
| #define DS1307_REG_MDAY 0x04 /* 01-31 */ |
| #define DS1307_REG_MONTH 0x05 /* 01-12 */ |
| # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */ |
| #define DS1307_REG_YEAR 0x06 /* 00-99 */ |
| |
| /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) |
| * start at 7, and they differ a LOT. Only control and status matter for |
| * basic RTC date and time functionality; be careful using them. |
| */ |
| #define DS1307_REG_CONTROL 0x07 /* or ds1338 */ |
| # define DS1307_BIT_OUT 0x80 |
| # define DS1338_BIT_OSF 0x20 |
| # define DS1307_BIT_SQWE 0x10 |
| # define DS1307_BIT_RS1 0x02 |
| # define DS1307_BIT_RS0 0x01 |
| #define DS1337_REG_CONTROL 0x0e |
| # define DS1337_BIT_nEOSC 0x80 |
| # define DS1339_BIT_BBSQI 0x20 |
| # define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */ |
| # define DS1337_BIT_RS2 0x10 |
| # define DS1337_BIT_RS1 0x08 |
| # define DS1337_BIT_INTCN 0x04 |
| # define DS1337_BIT_A2IE 0x02 |
| # define DS1337_BIT_A1IE 0x01 |
| #define DS1340_REG_CONTROL 0x07 |
| # define DS1340_BIT_OUT 0x80 |
| # define DS1340_BIT_FT 0x40 |
| # define DS1340_BIT_CALIB_SIGN 0x20 |
| # define DS1340_M_CALIBRATION 0x1f |
| #define DS1340_REG_FLAG 0x09 |
| # define DS1340_BIT_OSF 0x80 |
| #define DS1337_REG_STATUS 0x0f |
| # define DS1337_BIT_OSF 0x80 |
| # define DS1337_BIT_A2I 0x02 |
| # define DS1337_BIT_A1I 0x01 |
| #define DS1339_REG_ALARM1_SECS 0x07 |
| #define DS1339_REG_TRICKLE 0x10 |
| |
| #define RX8025_REG_CTRL1 0x0e |
| # define RX8025_BIT_2412 0x20 |
| #define RX8025_REG_CTRL2 0x0f |
| # define RX8025_BIT_PON 0x10 |
| # define RX8025_BIT_VDET 0x40 |
| # define RX8025_BIT_XST 0x20 |
| |
| |
| struct ds1307 { |
| u8 offset; /* register's offset */ |
| u8 regs[11]; |
| enum ds_type type; |
| unsigned long flags; |
| #define HAS_NVRAM 0 /* bit 0 == sysfs file active */ |
| #define HAS_ALARM 1 /* bit 1 == irq claimed */ |
| struct i2c_client *client; |
| struct rtc_device *rtc; |
| struct work_struct work; |
| s32 (*read_block_data)(const struct i2c_client *client, u8 command, |
| u8 length, u8 *values); |
| s32 (*write_block_data)(const struct i2c_client *client, u8 command, |
| u8 length, const u8 *values); |
| }; |
| |
| struct chip_desc { |
| unsigned nvram56:1; |
| unsigned alarm:1; |
| }; |
| |
| static const struct chip_desc chips[last_ds_type] = { |
| [ds_1307] = { |
| .nvram56 = 1, |
| }, |
| [ds_1337] = { |
| .alarm = 1, |
| }, |
| [ds_1338] = { |
| .nvram56 = 1, |
| }, |
| [ds_1339] = { |
| .alarm = 1, |
| }, |
| [ds_3231] = { |
| .alarm = 1, |
| }, |
| }; |
| |
| static const struct i2c_device_id ds1307_id[] = { |
| { "ds1307", ds_1307 }, |
| { "ds1337", ds_1337 }, |
| { "ds1338", ds_1338 }, |
| { "ds1339", ds_1339 }, |
| { "ds1388", ds_1388 }, |
| { "ds1340", ds_1340 }, |
| { "ds3231", ds_3231 }, |
| { "m41t00", m41t00 }, |
| { "mcp7941x", mcp7941x }, |
| { "pt7c4338", ds_1307 }, |
| { "rx8025", rx_8025 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ds1307_id); |
| |
| /*----------------------------------------------------------------------*/ |
| |
| #define BLOCK_DATA_MAX_TRIES 10 |
| |
| static s32 ds1307_read_block_data_once(const struct i2c_client *client, |
| u8 command, u8 length, u8 *values) |
| { |
| s32 i, data; |
| |
| for (i = 0; i < length; i++) { |
| data = i2c_smbus_read_byte_data(client, command + i); |
| if (data < 0) |
| return data; |
| values[i] = data; |
| } |
| return i; |
| } |
| |
| static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command, |
| u8 length, u8 *values) |
| { |
| u8 oldvalues[I2C_SMBUS_BLOCK_MAX]; |
| s32 ret; |
| int tries = 0; |
| |
| dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length); |
| ret = ds1307_read_block_data_once(client, command, length, values); |
| if (ret < 0) |
| return ret; |
| do { |
| if (++tries > BLOCK_DATA_MAX_TRIES) { |
| dev_err(&client->dev, |
| "ds1307_read_block_data failed\n"); |
| return -EIO; |
| } |
| memcpy(oldvalues, values, length); |
| ret = ds1307_read_block_data_once(client, command, length, |
| values); |
| if (ret < 0) |
| return ret; |
| } while (memcmp(oldvalues, values, length)); |
| return length; |
| } |
| |
| static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command, |
| u8 length, const u8 *values) |
| { |
| u8 currvalues[I2C_SMBUS_BLOCK_MAX]; |
| int tries = 0; |
| |
| dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length); |
| do { |
| s32 i, ret; |
| |
| if (++tries > BLOCK_DATA_MAX_TRIES) { |
| dev_err(&client->dev, |
| "ds1307_write_block_data failed\n"); |
| return -EIO; |
| } |
| for (i = 0; i < length; i++) { |
| ret = i2c_smbus_write_byte_data(client, command + i, |
| values[i]); |
| if (ret < 0) |
| return ret; |
| } |
| ret = ds1307_read_block_data_once(client, command, length, |
| currvalues); |
| if (ret < 0) |
| return ret; |
| } while (memcmp(currvalues, values, length)); |
| return length; |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| |
| /* |
| * The IRQ logic includes a "real" handler running in IRQ context just |
| * long enough to schedule this workqueue entry. We need a task context |
| * to talk to the RTC, since I2C I/O calls require that; and disable the |
| * IRQ until we clear its status on the chip, so that this handler can |
| * work with any type of triggering (not just falling edge). |
| * |
| * The ds1337 and ds1339 both have two alarms, but we only use the first |
| * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm |
| * signal; ds1339 chips have only one alarm signal. |
| */ |
| static void ds1307_work(struct work_struct *work) |
| { |
| struct ds1307 *ds1307; |
| struct i2c_client *client; |
| struct mutex *lock; |
| int stat, control; |
| |
| ds1307 = container_of(work, struct ds1307, work); |
| client = ds1307->client; |
| lock = &ds1307->rtc->ops_lock; |
| |
| mutex_lock(lock); |
| stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS); |
| if (stat < 0) |
| goto out; |
| |
| if (stat & DS1337_BIT_A1I) { |
| stat &= ~DS1337_BIT_A1I; |
| i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat); |
| |
| control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); |
| if (control < 0) |
| goto out; |
| |
| control &= ~DS1337_BIT_A1IE; |
| i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control); |
| |
| rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF); |
| } |
| |
| out: |
| if (test_bit(HAS_ALARM, &ds1307->flags)) |
| enable_irq(client->irq); |
| mutex_unlock(lock); |
| } |
| |
| static irqreturn_t ds1307_irq(int irq, void *dev_id) |
| { |
| struct i2c_client *client = dev_id; |
| struct ds1307 *ds1307 = i2c_get_clientdata(client); |
| |
| disable_irq_nosync(irq); |
| schedule_work(&ds1307->work); |
| return IRQ_HANDLED; |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| |
| static int ds1307_get_time(struct device *dev, struct rtc_time *t) |
| { |
| struct ds1307 *ds1307 = dev_get_drvdata(dev); |
| int tmp; |
| |
| /* read the RTC date and time registers all at once */ |
| tmp = ds1307->read_block_data(ds1307->client, |
| ds1307->offset, 7, ds1307->regs); |
| if (tmp != 7) { |
| dev_err(dev, "%s error %d\n", "read", tmp); |
| return -EIO; |
| } |
| |
| dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", |
| "read", |
| ds1307->regs[0], ds1307->regs[1], |
| ds1307->regs[2], ds1307->regs[3], |
| ds1307->regs[4], ds1307->regs[5], |
| ds1307->regs[6]); |
| |
| t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f); |
| t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f); |
| tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; |
| t->tm_hour = bcd2bin(tmp); |
| t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; |
| t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f); |
| tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; |
| t->tm_mon = bcd2bin(tmp) - 1; |
| |
| /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ |
| t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100; |
| |
| dev_dbg(dev, "%s secs=%d, mins=%d, " |
| "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", |
| "read", t->tm_sec, t->tm_min, |
| t->tm_hour, t->tm_mday, |
| t->tm_mon, t->tm_year, t->tm_wday); |
| |
| /* initial clock setting can be undefined */ |
| return rtc_valid_tm(t); |
| } |
| |
| static int ds1307_set_time(struct device *dev, struct rtc_time *t) |
| { |
| struct ds1307 *ds1307 = dev_get_drvdata(dev); |
| int result; |
| int tmp; |
| u8 *buf = ds1307->regs; |
| |
| dev_dbg(dev, "%s secs=%d, mins=%d, " |
| "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", |
| "write", t->tm_sec, t->tm_min, |
| t->tm_hour, t->tm_mday, |
| t->tm_mon, t->tm_year, t->tm_wday); |
| |
| buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec); |
| buf[DS1307_REG_MIN] = bin2bcd(t->tm_min); |
| buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour); |
| buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1); |
| buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday); |
| buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1); |
| |
| /* assume 20YY not 19YY */ |
| tmp = t->tm_year - 100; |
| buf[DS1307_REG_YEAR] = bin2bcd(tmp); |
| |
| switch (ds1307->type) { |
| case ds_1337: |
| case ds_1339: |
| case ds_3231: |
| buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; |
| break; |
| case ds_1340: |
| buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN |
| | DS1340_BIT_CENTURY; |
| break; |
| case mcp7941x: |
| buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST; |
| buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN; |
| break; |
| default: |
| break; |
| } |
| |
| dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", |
| "write", buf[0], buf[1], buf[2], buf[3], |
| buf[4], buf[5], buf[6]); |
| |
| result = ds1307->write_block_data(ds1307->client, |
| ds1307->offset, 7, buf); |
| if (result < 0) { |
| dev_err(dev, "%s error %d\n", "write", result); |
| return result; |
| } |
| return 0; |
| } |
| |
| static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ds1307 *ds1307 = i2c_get_clientdata(client); |
| int ret; |
| |
| if (!test_bit(HAS_ALARM, &ds1307->flags)) |
| return -EINVAL; |
| |
| /* read all ALARM1, ALARM2, and status registers at once */ |
| ret = ds1307->read_block_data(client, |
| DS1339_REG_ALARM1_SECS, 9, ds1307->regs); |
| if (ret != 9) { |
| dev_err(dev, "%s error %d\n", "alarm read", ret); |
| return -EIO; |
| } |
| |
| dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n", |
| "alarm read", |
| ds1307->regs[0], ds1307->regs[1], |
| ds1307->regs[2], ds1307->regs[3], |
| ds1307->regs[4], ds1307->regs[5], |
| ds1307->regs[6], ds1307->regs[7], |
| ds1307->regs[8]); |
| |
| /* report alarm time (ALARM1); assume 24 hour and day-of-month modes, |
| * and that all four fields are checked matches |
| */ |
| t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f); |
| t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f); |
| t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f); |
| t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f); |
| t->time.tm_mon = -1; |
| t->time.tm_year = -1; |
| t->time.tm_wday = -1; |
| t->time.tm_yday = -1; |
| t->time.tm_isdst = -1; |
| |
| /* ... and status */ |
| t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE); |
| t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I); |
| |
| dev_dbg(dev, "%s secs=%d, mins=%d, " |
| "hours=%d, mday=%d, enabled=%d, pending=%d\n", |
| "alarm read", t->time.tm_sec, t->time.tm_min, |
| t->time.tm_hour, t->time.tm_mday, |
| t->enabled, t->pending); |
| |
| return 0; |
| } |
| |
| static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ds1307 *ds1307 = i2c_get_clientdata(client); |
| unsigned char *buf = ds1307->regs; |
| u8 control, status; |
| int ret; |
| |
| if (!test_bit(HAS_ALARM, &ds1307->flags)) |
| return -EINVAL; |
| |
| dev_dbg(dev, "%s secs=%d, mins=%d, " |
| "hours=%d, mday=%d, enabled=%d, pending=%d\n", |
| "alarm set", t->time.tm_sec, t->time.tm_min, |
| t->time.tm_hour, t->time.tm_mday, |
| t->enabled, t->pending); |
| |
| /* read current status of both alarms and the chip */ |
| ret = ds1307->read_block_data(client, |
| DS1339_REG_ALARM1_SECS, 9, buf); |
| if (ret != 9) { |
| dev_err(dev, "%s error %d\n", "alarm write", ret); |
| return -EIO; |
| } |
| control = ds1307->regs[7]; |
| status = ds1307->regs[8]; |
| |
| dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n", |
| "alarm set (old status)", |
| ds1307->regs[0], ds1307->regs[1], |
| ds1307->regs[2], ds1307->regs[3], |
| ds1307->regs[4], ds1307->regs[5], |
| ds1307->regs[6], control, status); |
| |
| /* set ALARM1, using 24 hour and day-of-month modes */ |
| buf[0] = bin2bcd(t->time.tm_sec); |
| buf[1] = bin2bcd(t->time.tm_min); |
| buf[2] = bin2bcd(t->time.tm_hour); |
| buf[3] = bin2bcd(t->time.tm_mday); |
| |
| /* set ALARM2 to non-garbage */ |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 0; |
| |
| /* optionally enable ALARM1 */ |
| buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE); |
| if (t->enabled) { |
| dev_dbg(dev, "alarm IRQ armed\n"); |
| buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */ |
| } |
| buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I); |
| |
| ret = ds1307->write_block_data(client, |
| DS1339_REG_ALARM1_SECS, 9, buf); |
| if (ret < 0) { |
| dev_err(dev, "can't set alarm time\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ds1307 *ds1307 = i2c_get_clientdata(client); |
| int ret; |
| |
| if (!test_bit(HAS_ALARM, &ds1307->flags)) |
| return -ENOTTY; |
| |
| ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); |
| if (ret < 0) |
| return ret; |
| |
| if (enabled) |
| ret |= DS1337_BIT_A1IE; |
| else |
| ret &= ~DS1337_BIT_A1IE; |
| |
| ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct rtc_class_ops ds13xx_rtc_ops = { |
| .read_time = ds1307_get_time, |
| .set_time = ds1307_set_time, |
| .read_alarm = ds1337_read_alarm, |
| .set_alarm = ds1337_set_alarm, |
| .alarm_irq_enable = ds1307_alarm_irq_enable, |
| }; |
| |
| /*----------------------------------------------------------------------*/ |
| |
| #define NVRAM_SIZE 56 |
| |
| static ssize_t |
| ds1307_nvram_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct i2c_client *client; |
| struct ds1307 *ds1307; |
| int result; |
| |
| client = kobj_to_i2c_client(kobj); |
| ds1307 = i2c_get_clientdata(client); |
| |
| if (unlikely(off >= NVRAM_SIZE)) |
| return 0; |
| if ((off + count) > NVRAM_SIZE) |
| count = NVRAM_SIZE - off; |
| if (unlikely(!count)) |
| return count; |
| |
| result = ds1307->read_block_data(client, 8 + off, count, buf); |
| if (result < 0) |
| dev_err(&client->dev, "%s error %d\n", "nvram read", result); |
| return result; |
| } |
| |
| static ssize_t |
| ds1307_nvram_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct i2c_client *client; |
| struct ds1307 *ds1307; |
| int result; |
| |
| client = kobj_to_i2c_client(kobj); |
| ds1307 = i2c_get_clientdata(client); |
| |
| if (unlikely(off >= NVRAM_SIZE)) |
| return -EFBIG; |
| if ((off + count) > NVRAM_SIZE) |
| count = NVRAM_SIZE - off; |
| if (unlikely(!count)) |
| return count; |
| |
| result = ds1307->write_block_data(client, 8 + off, count, buf); |
| if (result < 0) { |
| dev_err(&client->dev, "%s error %d\n", "nvram write", result); |
| return result; |
| } |
| return count; |
| } |
| |
| static struct bin_attribute nvram = { |
| .attr = { |
| .name = "nvram", |
| .mode = S_IRUGO | S_IWUSR, |
| }, |
| |
| .read = ds1307_nvram_read, |
| .write = ds1307_nvram_write, |
| .size = NVRAM_SIZE, |
| }; |
| |
| /*----------------------------------------------------------------------*/ |
| |
| static struct i2c_driver ds1307_driver; |
| |
| static int __devinit ds1307_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct ds1307 *ds1307; |
| int err = -ENODEV; |
| int tmp; |
| const struct chip_desc *chip = &chips[id->driver_data]; |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| int want_irq = false; |
| unsigned char *buf; |
| static const int bbsqi_bitpos[] = { |
| [ds_1337] = 0, |
| [ds_1339] = DS1339_BIT_BBSQI, |
| [ds_3231] = DS3231_BIT_BBSQW, |
| }; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA) |
| && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) |
| return -EIO; |
| |
| if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, ds1307); |
| |
| ds1307->client = client; |
| ds1307->type = id->driver_data; |
| ds1307->offset = 0; |
| |
| buf = ds1307->regs; |
| if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { |
| ds1307->read_block_data = i2c_smbus_read_i2c_block_data; |
| ds1307->write_block_data = i2c_smbus_write_i2c_block_data; |
| } else { |
| ds1307->read_block_data = ds1307_read_block_data; |
| ds1307->write_block_data = ds1307_write_block_data; |
| } |
| |
| switch (ds1307->type) { |
| case ds_1337: |
| case ds_1339: |
| case ds_3231: |
| /* has IRQ? */ |
| if (ds1307->client->irq > 0 && chip->alarm) { |
| INIT_WORK(&ds1307->work, ds1307_work); |
| want_irq = true; |
| } |
| /* get registers that the "rtc" read below won't read... */ |
| tmp = ds1307->read_block_data(ds1307->client, |
| DS1337_REG_CONTROL, 2, buf); |
| if (tmp != 2) { |
| pr_debug("read error %d\n", tmp); |
| err = -EIO; |
| goto exit_free; |
| } |
| |
| /* oscillator off? turn it on, so clock can tick. */ |
| if (ds1307->regs[0] & DS1337_BIT_nEOSC) |
| ds1307->regs[0] &= ~DS1337_BIT_nEOSC; |
| |
| /* Using IRQ? Disable the square wave and both alarms. |
| * For some variants, be sure alarms can trigger when we're |
| * running on Vbackup (BBSQI/BBSQW) |
| */ |
| if (want_irq) { |
| ds1307->regs[0] |= DS1337_BIT_INTCN |
| | bbsqi_bitpos[ds1307->type]; |
| ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE); |
| } |
| |
| i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, |
| ds1307->regs[0]); |
| |
| /* oscillator fault? clear flag, and warn */ |
| if (ds1307->regs[1] & DS1337_BIT_OSF) { |
| i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, |
| ds1307->regs[1] & ~DS1337_BIT_OSF); |
| dev_warn(&client->dev, "SET TIME!\n"); |
| } |
| break; |
| |
| case rx_8025: |
| tmp = i2c_smbus_read_i2c_block_data(ds1307->client, |
| RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); |
| if (tmp != 2) { |
| pr_debug("read error %d\n", tmp); |
| err = -EIO; |
| goto exit_free; |
| } |
| |
| /* oscillator off? turn it on, so clock can tick. */ |
| if (!(ds1307->regs[1] & RX8025_BIT_XST)) { |
| ds1307->regs[1] |= RX8025_BIT_XST; |
| i2c_smbus_write_byte_data(client, |
| RX8025_REG_CTRL2 << 4 | 0x08, |
| ds1307->regs[1]); |
| dev_warn(&client->dev, |
| "oscillator stop detected - SET TIME!\n"); |
| } |
| |
| if (ds1307->regs[1] & RX8025_BIT_PON) { |
| ds1307->regs[1] &= ~RX8025_BIT_PON; |
| i2c_smbus_write_byte_data(client, |
| RX8025_REG_CTRL2 << 4 | 0x08, |
| ds1307->regs[1]); |
| dev_warn(&client->dev, "power-on detected\n"); |
| } |
| |
| if (ds1307->regs[1] & RX8025_BIT_VDET) { |
| ds1307->regs[1] &= ~RX8025_BIT_VDET; |
| i2c_smbus_write_byte_data(client, |
| RX8025_REG_CTRL2 << 4 | 0x08, |
| ds1307->regs[1]); |
| dev_warn(&client->dev, "voltage drop detected\n"); |
| } |
| |
| /* make sure we are running in 24hour mode */ |
| if (!(ds1307->regs[0] & RX8025_BIT_2412)) { |
| u8 hour; |
| |
| /* switch to 24 hour mode */ |
| i2c_smbus_write_byte_data(client, |
| RX8025_REG_CTRL1 << 4 | 0x08, |
| ds1307->regs[0] | |
| RX8025_BIT_2412); |
| |
| tmp = i2c_smbus_read_i2c_block_data(ds1307->client, |
| RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); |
| if (tmp != 2) { |
| pr_debug("read error %d\n", tmp); |
| err = -EIO; |
| goto exit_free; |
| } |
| |
| /* correct hour */ |
| hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]); |
| if (hour == 12) |
| hour = 0; |
| if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) |
| hour += 12; |
| |
| i2c_smbus_write_byte_data(client, |
| DS1307_REG_HOUR << 4 | 0x08, |
| hour); |
| } |
| break; |
| case ds_1388: |
| ds1307->offset = 1; /* Seconds starts at 1 */ |
| break; |
| default: |
| break; |
| } |
| |
| read_rtc: |
| /* read RTC registers */ |
| tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf); |
| if (tmp != 8) { |
| pr_debug("read error %d\n", tmp); |
| err = -EIO; |
| goto exit_free; |
| } |
| |
| /* minimal sanity checking; some chips (like DS1340) don't |
| * specify the extra bits as must-be-zero, but there are |
| * still a few values that are clearly out-of-range. |
| */ |
| tmp = ds1307->regs[DS1307_REG_SECS]; |
| switch (ds1307->type) { |
| case ds_1307: |
| case m41t00: |
| /* clock halted? turn it on, so clock can tick. */ |
| if (tmp & DS1307_BIT_CH) { |
| i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); |
| dev_warn(&client->dev, "SET TIME!\n"); |
| goto read_rtc; |
| } |
| break; |
| case ds_1338: |
| /* clock halted? turn it on, so clock can tick. */ |
| if (tmp & DS1307_BIT_CH) |
| i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); |
| |
| /* oscillator fault? clear flag, and warn */ |
| if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) { |
| i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL, |
| ds1307->regs[DS1307_REG_CONTROL] |
| & ~DS1338_BIT_OSF); |
| dev_warn(&client->dev, "SET TIME!\n"); |
| goto read_rtc; |
| } |
| break; |
| case ds_1340: |
| /* clock halted? turn it on, so clock can tick. */ |
| if (tmp & DS1340_BIT_nEOSC) |
| i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); |
| |
| tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG); |
| if (tmp < 0) { |
| pr_debug("read error %d\n", tmp); |
| err = -EIO; |
| goto exit_free; |
| } |
| |
| /* oscillator fault? clear flag, and warn */ |
| if (tmp & DS1340_BIT_OSF) { |
| i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0); |
| dev_warn(&client->dev, "SET TIME!\n"); |
| } |
| break; |
| case mcp7941x: |
| /* make sure that the backup battery is enabled */ |
| if (!(ds1307->regs[DS1307_REG_WDAY] & MCP7941X_BIT_VBATEN)) { |
| i2c_smbus_write_byte_data(client, DS1307_REG_WDAY, |
| ds1307->regs[DS1307_REG_WDAY] |
| | MCP7941X_BIT_VBATEN); |
| } |
| |
| /* clock halted? turn it on, so clock can tick. */ |
| if (!(tmp & MCP7941X_BIT_ST)) { |
| i2c_smbus_write_byte_data(client, DS1307_REG_SECS, |
| MCP7941X_BIT_ST); |
| dev_warn(&client->dev, "SET TIME!\n"); |
| goto read_rtc; |
| } |
| |
| break; |
| default: |
| break; |
| } |
| |
| tmp = ds1307->regs[DS1307_REG_HOUR]; |
| switch (ds1307->type) { |
| case ds_1340: |
| case m41t00: |
| /* NOTE: ignores century bits; fix before deploying |
| * systems that will run through year 2100. |
| */ |
| break; |
| case rx_8025: |
| break; |
| default: |
| if (!(tmp & DS1307_BIT_12HR)) |
| break; |
| |
| /* Be sure we're in 24 hour mode. Multi-master systems |
| * take note... |
| */ |
| tmp = bcd2bin(tmp & 0x1f); |
| if (tmp == 12) |
| tmp = 0; |
| if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) |
| tmp += 12; |
| i2c_smbus_write_byte_data(client, |
| ds1307->offset + DS1307_REG_HOUR, |
| bin2bcd(tmp)); |
| } |
| |
| ds1307->rtc = rtc_device_register(client->name, &client->dev, |
| &ds13xx_rtc_ops, THIS_MODULE); |
| if (IS_ERR(ds1307->rtc)) { |
| err = PTR_ERR(ds1307->rtc); |
| dev_err(&client->dev, |
| "unable to register the class device\n"); |
| goto exit_free; |
| } |
| |
| if (want_irq) { |
| err = request_irq(client->irq, ds1307_irq, IRQF_SHARED, |
| ds1307->rtc->name, client); |
| if (err) { |
| dev_err(&client->dev, |
| "unable to request IRQ!\n"); |
| goto exit_irq; |
| } |
| |
| device_set_wakeup_capable(&client->dev, 1); |
| set_bit(HAS_ALARM, &ds1307->flags); |
| dev_dbg(&client->dev, "got IRQ %d\n", client->irq); |
| } |
| |
| if (chip->nvram56) { |
| err = sysfs_create_bin_file(&client->dev.kobj, &nvram); |
| if (err == 0) { |
| set_bit(HAS_NVRAM, &ds1307->flags); |
| dev_info(&client->dev, "56 bytes nvram\n"); |
| } |
| } |
| |
| return 0; |
| |
| exit_irq: |
| rtc_device_unregister(ds1307->rtc); |
| exit_free: |
| kfree(ds1307); |
| return err; |
| } |
| |
| static int __devexit ds1307_remove(struct i2c_client *client) |
| { |
| struct ds1307 *ds1307 = i2c_get_clientdata(client); |
| |
| if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) { |
| free_irq(client->irq, client); |
| cancel_work_sync(&ds1307->work); |
| } |
| |
| if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags)) |
| sysfs_remove_bin_file(&client->dev.kobj, &nvram); |
| |
| rtc_device_unregister(ds1307->rtc); |
| kfree(ds1307); |
| return 0; |
| } |
| |
| static struct i2c_driver ds1307_driver = { |
| .driver = { |
| .name = "rtc-ds1307", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ds1307_probe, |
| .remove = __devexit_p(ds1307_remove), |
| .id_table = ds1307_id, |
| }; |
| |
| module_i2c_driver(ds1307_driver); |
| |
| MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); |
| MODULE_LICENSE("GPL"); |