Jim Quinlan | 4cf176e | 2020-01-03 11:04:29 -0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* Copyright (C) 2018-2020 Broadcom */ |
| 3 | |
| 4 | #include <linux/device.h> |
| 5 | #include <linux/iopoll.h> |
| 6 | #include <linux/module.h> |
| 7 | #include <linux/of.h> |
| 8 | #include <linux/platform_device.h> |
| 9 | #include <linux/reset-controller.h> |
| 10 | |
| 11 | #define BRCM_RESCAL_START 0x0 |
| 12 | #define BRCM_RESCAL_START_BIT BIT(0) |
| 13 | #define BRCM_RESCAL_CTRL 0x4 |
| 14 | #define BRCM_RESCAL_STATUS 0x8 |
| 15 | #define BRCM_RESCAL_STATUS_BIT BIT(0) |
| 16 | |
| 17 | struct brcm_rescal_reset { |
| 18 | void __iomem *base; |
| 19 | struct device *dev; |
| 20 | struct reset_controller_dev rcdev; |
| 21 | }; |
| 22 | |
| 23 | static int brcm_rescal_reset_set(struct reset_controller_dev *rcdev, |
| 24 | unsigned long id) |
| 25 | { |
| 26 | struct brcm_rescal_reset *data = |
| 27 | container_of(rcdev, struct brcm_rescal_reset, rcdev); |
| 28 | void __iomem *base = data->base; |
| 29 | u32 reg; |
| 30 | int ret; |
| 31 | |
| 32 | reg = readl(base + BRCM_RESCAL_START); |
| 33 | writel(reg | BRCM_RESCAL_START_BIT, base + BRCM_RESCAL_START); |
| 34 | reg = readl(base + BRCM_RESCAL_START); |
| 35 | if (!(reg & BRCM_RESCAL_START_BIT)) { |
| 36 | dev_err(data->dev, "failed to start SATA/PCIe rescal\n"); |
| 37 | return -EIO; |
| 38 | } |
| 39 | |
| 40 | ret = readl_poll_timeout(base + BRCM_RESCAL_STATUS, reg, |
Jim Quinlan | e51371b | 2021-09-14 15:11:21 -0700 | [diff] [blame] | 41 | (reg & BRCM_RESCAL_STATUS_BIT), 100, 1000); |
Jim Quinlan | 4cf176e | 2020-01-03 11:04:29 -0800 | [diff] [blame] | 42 | if (ret) { |
| 43 | dev_err(data->dev, "time out on SATA/PCIe rescal\n"); |
| 44 | return ret; |
| 45 | } |
| 46 | |
| 47 | reg = readl(base + BRCM_RESCAL_START); |
| 48 | writel(reg & ~BRCM_RESCAL_START_BIT, base + BRCM_RESCAL_START); |
| 49 | |
| 50 | dev_dbg(data->dev, "SATA/PCIe rescal success\n"); |
| 51 | |
| 52 | return 0; |
| 53 | } |
| 54 | |
| 55 | static int brcm_rescal_reset_xlate(struct reset_controller_dev *rcdev, |
| 56 | const struct of_phandle_args *reset_spec) |
| 57 | { |
| 58 | /* This is needed if #reset-cells == 0. */ |
| 59 | return 0; |
| 60 | } |
| 61 | |
| 62 | static const struct reset_control_ops brcm_rescal_reset_ops = { |
| 63 | .reset = brcm_rescal_reset_set, |
| 64 | }; |
| 65 | |
| 66 | static int brcm_rescal_reset_probe(struct platform_device *pdev) |
| 67 | { |
| 68 | struct brcm_rescal_reset *data; |
| 69 | struct resource *res; |
| 70 | |
| 71 | data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| 72 | if (!data) |
| 73 | return -ENOMEM; |
| 74 | |
| 75 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 76 | data->base = devm_ioremap_resource(&pdev->dev, res); |
| 77 | if (IS_ERR(data->base)) |
| 78 | return PTR_ERR(data->base); |
| 79 | |
| 80 | data->rcdev.owner = THIS_MODULE; |
| 81 | data->rcdev.nr_resets = 1; |
| 82 | data->rcdev.ops = &brcm_rescal_reset_ops; |
| 83 | data->rcdev.of_node = pdev->dev.of_node; |
| 84 | data->rcdev.of_xlate = brcm_rescal_reset_xlate; |
| 85 | data->dev = &pdev->dev; |
| 86 | |
| 87 | return devm_reset_controller_register(&pdev->dev, &data->rcdev); |
| 88 | } |
| 89 | |
| 90 | static const struct of_device_id brcm_rescal_reset_of_match[] = { |
| 91 | { .compatible = "brcm,bcm7216-pcie-sata-rescal" }, |
| 92 | { }, |
| 93 | }; |
| 94 | MODULE_DEVICE_TABLE(of, brcm_rescal_reset_of_match); |
| 95 | |
| 96 | static struct platform_driver brcm_rescal_reset_driver = { |
| 97 | .probe = brcm_rescal_reset_probe, |
| 98 | .driver = { |
| 99 | .name = "brcm-rescal-reset", |
| 100 | .of_match_table = brcm_rescal_reset_of_match, |
| 101 | } |
| 102 | }; |
| 103 | module_platform_driver(brcm_rescal_reset_driver); |
| 104 | |
| 105 | MODULE_AUTHOR("Broadcom"); |
| 106 | MODULE_DESCRIPTION("Broadcom SATA/PCIe rescal reset controller"); |
| 107 | MODULE_LICENSE("GPL v2"); |