Joseph Lo | 0ac65fc | 2019-05-29 16:21:35 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (c) 2015-2020, NVIDIA CORPORATION. All rights reserved. |
| 4 | */ |
| 5 | |
| 6 | #include <linux/bitfield.h> |
| 7 | #include <linux/clk.h> |
| 8 | #include <linux/clk-provider.h> |
| 9 | #include <linux/clk/tegra.h> |
| 10 | #include <linux/device.h> |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/io.h> |
| 13 | #include <linux/slab.h> |
| 14 | |
Thierry Reding | 2f878d0 | 2020-06-22 08:08:26 +0200 | [diff] [blame] | 15 | #include "clk.h" |
| 16 | |
Joseph Lo | 0ac65fc | 2019-05-29 16:21:35 +0800 | [diff] [blame] | 17 | #define CLK_SOURCE_EMC 0x19c |
| 18 | #define CLK_SOURCE_EMC_2X_CLK_SRC GENMASK(31, 29) |
| 19 | #define CLK_SOURCE_EMC_MC_EMC_SAME_FREQ BIT(16) |
| 20 | #define CLK_SOURCE_EMC_2X_CLK_DIVISOR GENMASK(7, 0) |
| 21 | |
| 22 | #define CLK_SRC_PLLM 0 |
| 23 | #define CLK_SRC_PLLC 1 |
| 24 | #define CLK_SRC_PLLP 2 |
| 25 | #define CLK_SRC_CLK_M 3 |
| 26 | #define CLK_SRC_PLLM_UD 4 |
| 27 | #define CLK_SRC_PLLMB_UD 5 |
| 28 | #define CLK_SRC_PLLMB 6 |
| 29 | #define CLK_SRC_PLLP_UD 7 |
| 30 | |
| 31 | struct tegra210_clk_emc { |
| 32 | struct clk_hw hw; |
| 33 | void __iomem *regs; |
| 34 | |
| 35 | struct tegra210_clk_emc_provider *provider; |
| 36 | |
| 37 | struct clk *parents[8]; |
| 38 | }; |
| 39 | |
| 40 | static inline struct tegra210_clk_emc * |
| 41 | to_tegra210_clk_emc(struct clk_hw *hw) |
| 42 | { |
| 43 | return container_of(hw, struct tegra210_clk_emc, hw); |
| 44 | } |
| 45 | |
| 46 | static const char *tegra210_clk_emc_parents[] = { |
| 47 | "pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb_ud", |
| 48 | "pll_mb", "pll_p_ud", |
| 49 | }; |
| 50 | |
| 51 | static u8 tegra210_clk_emc_get_parent(struct clk_hw *hw) |
| 52 | { |
| 53 | struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); |
| 54 | u32 value; |
| 55 | u8 src; |
| 56 | |
| 57 | value = readl_relaxed(emc->regs + CLK_SOURCE_EMC); |
| 58 | src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, value); |
| 59 | |
| 60 | return src; |
| 61 | } |
| 62 | |
| 63 | static unsigned long tegra210_clk_emc_recalc_rate(struct clk_hw *hw, |
| 64 | unsigned long parent_rate) |
| 65 | { |
| 66 | struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); |
| 67 | u32 value, div; |
| 68 | |
| 69 | /* |
| 70 | * CCF assumes that neither the parent nor its rate will change during |
| 71 | * ->set_rate(), so the parent rate passed in here was cached from the |
| 72 | * parent before the ->set_rate() call. |
| 73 | * |
| 74 | * This can lead to wrong results being reported for the EMC clock if |
| 75 | * the parent and/or parent rate have changed as part of the EMC rate |
| 76 | * change sequence. Fix this by overriding the parent clock with what |
| 77 | * we know to be the correct value after the rate change. |
| 78 | */ |
| 79 | parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); |
| 80 | |
| 81 | value = readl_relaxed(emc->regs + CLK_SOURCE_EMC); |
| 82 | |
| 83 | div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, value); |
| 84 | div += 2; |
| 85 | |
| 86 | return DIV_ROUND_UP(parent_rate * 2, div); |
| 87 | } |
| 88 | |
| 89 | static long tegra210_clk_emc_round_rate(struct clk_hw *hw, unsigned long rate, |
| 90 | unsigned long *prate) |
| 91 | { |
| 92 | struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); |
| 93 | struct tegra210_clk_emc_provider *provider = emc->provider; |
| 94 | unsigned int i; |
| 95 | |
| 96 | if (!provider || !provider->configs || provider->num_configs == 0) |
| 97 | return clk_hw_get_rate(hw); |
| 98 | |
| 99 | for (i = 0; i < provider->num_configs; i++) { |
| 100 | if (provider->configs[i].rate >= rate) |
| 101 | return provider->configs[i].rate; |
| 102 | } |
| 103 | |
| 104 | return provider->configs[i - 1].rate; |
| 105 | } |
| 106 | |
| 107 | static struct clk *tegra210_clk_emc_find_parent(struct tegra210_clk_emc *emc, |
| 108 | u8 index) |
| 109 | { |
| 110 | struct clk_hw *parent = clk_hw_get_parent_by_index(&emc->hw, index); |
| 111 | const char *name = clk_hw_get_name(parent); |
| 112 | |
| 113 | /* XXX implement cache? */ |
| 114 | |
| 115 | return __clk_lookup(name); |
| 116 | } |
| 117 | |
| 118 | static int tegra210_clk_emc_set_rate(struct clk_hw *hw, unsigned long rate, |
| 119 | unsigned long parent_rate) |
| 120 | { |
| 121 | struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); |
| 122 | struct tegra210_clk_emc_provider *provider = emc->provider; |
| 123 | struct tegra210_clk_emc_config *config; |
| 124 | struct device *dev = provider->dev; |
| 125 | struct clk_hw *old, *new, *parent; |
| 126 | u8 old_idx, new_idx, index; |
| 127 | struct clk *clk; |
| 128 | unsigned int i; |
| 129 | int err; |
| 130 | |
Stephen Boyd | f102ed0 | 2020-09-22 12:16:41 -0700 | [diff] [blame] | 131 | if (!provider->configs || provider->num_configs == 0) |
Joseph Lo | 0ac65fc | 2019-05-29 16:21:35 +0800 | [diff] [blame] | 132 | return -EINVAL; |
| 133 | |
| 134 | for (i = 0; i < provider->num_configs; i++) { |
| 135 | if (provider->configs[i].rate >= rate) { |
| 136 | config = &provider->configs[i]; |
| 137 | break; |
| 138 | } |
| 139 | } |
| 140 | |
| 141 | if (i == provider->num_configs) |
| 142 | config = &provider->configs[i - 1]; |
| 143 | |
| 144 | old_idx = tegra210_clk_emc_get_parent(hw); |
| 145 | new_idx = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value); |
| 146 | |
| 147 | old = clk_hw_get_parent_by_index(hw, old_idx); |
| 148 | new = clk_hw_get_parent_by_index(hw, new_idx); |
| 149 | |
| 150 | /* if the rate has changed... */ |
| 151 | if (config->parent_rate != clk_hw_get_rate(old)) { |
| 152 | /* ... but the clock source remains the same ... */ |
| 153 | if (new_idx == old_idx) { |
| 154 | /* ... switch to the alternative clock source. */ |
| 155 | switch (new_idx) { |
| 156 | case CLK_SRC_PLLM: |
| 157 | new_idx = CLK_SRC_PLLMB; |
| 158 | break; |
| 159 | |
| 160 | case CLK_SRC_PLLM_UD: |
| 161 | new_idx = CLK_SRC_PLLMB_UD; |
| 162 | break; |
| 163 | |
| 164 | case CLK_SRC_PLLMB_UD: |
| 165 | new_idx = CLK_SRC_PLLM_UD; |
| 166 | break; |
| 167 | |
| 168 | case CLK_SRC_PLLMB: |
| 169 | new_idx = CLK_SRC_PLLM; |
| 170 | break; |
| 171 | } |
| 172 | |
| 173 | /* |
| 174 | * This should never happen because we can't deal with |
| 175 | * it. |
| 176 | */ |
| 177 | if (WARN_ON(new_idx == old_idx)) |
| 178 | return -EINVAL; |
| 179 | |
| 180 | new = clk_hw_get_parent_by_index(hw, new_idx); |
| 181 | } |
| 182 | |
| 183 | index = new_idx; |
| 184 | parent = new; |
| 185 | } else { |
| 186 | index = old_idx; |
| 187 | parent = old; |
| 188 | } |
| 189 | |
| 190 | clk = tegra210_clk_emc_find_parent(emc, index); |
| 191 | if (IS_ERR(clk)) { |
| 192 | err = PTR_ERR(clk); |
| 193 | dev_err(dev, "failed to get parent clock for index %u: %d\n", |
| 194 | index, err); |
| 195 | return err; |
| 196 | } |
| 197 | |
| 198 | /* set the new parent clock to the required rate */ |
| 199 | if (clk_get_rate(clk) != config->parent_rate) { |
| 200 | err = clk_set_rate(clk, config->parent_rate); |
| 201 | if (err < 0) { |
| 202 | dev_err(dev, "failed to set rate %lu Hz for %pC: %d\n", |
| 203 | config->parent_rate, clk, err); |
| 204 | return err; |
| 205 | } |
| 206 | } |
| 207 | |
| 208 | /* enable the new parent clock */ |
| 209 | if (parent != old) { |
| 210 | err = clk_prepare_enable(clk); |
| 211 | if (err < 0) { |
| 212 | dev_err(dev, "failed to enable parent clock %pC: %d\n", |
| 213 | clk, err); |
| 214 | return err; |
| 215 | } |
| 216 | } |
| 217 | |
| 218 | /* update the EMC source configuration to reflect the new parent */ |
| 219 | config->value &= ~CLK_SOURCE_EMC_2X_CLK_SRC; |
| 220 | config->value |= FIELD_PREP(CLK_SOURCE_EMC_2X_CLK_SRC, index); |
| 221 | |
| 222 | /* |
| 223 | * Finally, switch the EMC programming with both old and new parent |
| 224 | * clocks enabled. |
| 225 | */ |
| 226 | err = provider->set_rate(dev, config); |
| 227 | if (err < 0) { |
| 228 | dev_err(dev, "failed to set EMC rate to %lu Hz: %d\n", rate, |
| 229 | err); |
| 230 | |
| 231 | /* |
| 232 | * If we're unable to switch to the new EMC frequency, we no |
| 233 | * longer need the new parent to be enabled. |
| 234 | */ |
| 235 | if (parent != old) |
| 236 | clk_disable_unprepare(clk); |
| 237 | |
| 238 | return err; |
| 239 | } |
| 240 | |
| 241 | /* reparent to new parent clock and disable the old parent clock */ |
| 242 | if (parent != old) { |
| 243 | clk = tegra210_clk_emc_find_parent(emc, old_idx); |
| 244 | if (IS_ERR(clk)) { |
| 245 | err = PTR_ERR(clk); |
| 246 | dev_err(dev, |
| 247 | "failed to get parent clock for index %u: %d\n", |
| 248 | old_idx, err); |
| 249 | return err; |
| 250 | } |
| 251 | |
| 252 | clk_hw_reparent(hw, parent); |
| 253 | clk_disable_unprepare(clk); |
| 254 | } |
| 255 | |
| 256 | return err; |
| 257 | } |
| 258 | |
| 259 | static const struct clk_ops tegra210_clk_emc_ops = { |
| 260 | .get_parent = tegra210_clk_emc_get_parent, |
| 261 | .recalc_rate = tegra210_clk_emc_recalc_rate, |
| 262 | .round_rate = tegra210_clk_emc_round_rate, |
| 263 | .set_rate = tegra210_clk_emc_set_rate, |
| 264 | }; |
| 265 | |
| 266 | struct clk *tegra210_clk_register_emc(struct device_node *np, |
| 267 | void __iomem *regs) |
| 268 | { |
| 269 | struct tegra210_clk_emc *emc; |
| 270 | struct clk_init_data init; |
| 271 | struct clk *clk; |
| 272 | |
| 273 | emc = kzalloc(sizeof(*emc), GFP_KERNEL); |
| 274 | if (!emc) |
| 275 | return ERR_PTR(-ENOMEM); |
| 276 | |
| 277 | emc->regs = regs; |
| 278 | |
| 279 | init.name = "emc"; |
| 280 | init.ops = &tegra210_clk_emc_ops; |
| 281 | init.flags = CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE; |
| 282 | init.parent_names = tegra210_clk_emc_parents; |
| 283 | init.num_parents = ARRAY_SIZE(tegra210_clk_emc_parents); |
| 284 | emc->hw.init = &init; |
| 285 | |
| 286 | clk = clk_register(NULL, &emc->hw); |
| 287 | if (IS_ERR(clk)) { |
| 288 | kfree(emc); |
| 289 | return clk; |
| 290 | } |
| 291 | |
| 292 | return clk; |
| 293 | } |
| 294 | |
| 295 | int tegra210_clk_emc_attach(struct clk *clk, |
| 296 | struct tegra210_clk_emc_provider *provider) |
| 297 | { |
| 298 | struct clk_hw *hw = __clk_get_hw(clk); |
| 299 | struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); |
| 300 | struct device *dev = provider->dev; |
| 301 | unsigned int i; |
| 302 | int err; |
| 303 | |
| 304 | if (!try_module_get(provider->owner)) |
| 305 | return -ENODEV; |
| 306 | |
| 307 | for (i = 0; i < provider->num_configs; i++) { |
| 308 | struct tegra210_clk_emc_config *config = &provider->configs[i]; |
| 309 | struct clk_hw *parent; |
| 310 | bool same_freq; |
| 311 | u8 div, src; |
| 312 | |
| 313 | div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, config->value); |
| 314 | src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value); |
| 315 | |
| 316 | /* do basic sanity checking on the EMC timings */ |
| 317 | if (div & 0x1) { |
| 318 | dev_err(dev, "invalid odd divider %u for rate %lu Hz\n", |
| 319 | div, config->rate); |
| 320 | err = -EINVAL; |
| 321 | goto put; |
| 322 | } |
| 323 | |
| 324 | same_freq = config->value & CLK_SOURCE_EMC_MC_EMC_SAME_FREQ; |
| 325 | |
| 326 | if (same_freq != config->same_freq) { |
| 327 | dev_err(dev, |
| 328 | "ambiguous EMC to MC ratio for rate %lu Hz\n", |
| 329 | config->rate); |
| 330 | err = -EINVAL; |
| 331 | goto put; |
| 332 | } |
| 333 | |
| 334 | parent = clk_hw_get_parent_by_index(hw, src); |
| 335 | config->parent = src; |
| 336 | |
| 337 | if (src == CLK_SRC_PLLM || src == CLK_SRC_PLLM_UD) { |
| 338 | config->parent_rate = config->rate * (1 + div / 2); |
| 339 | } else { |
| 340 | unsigned long rate = config->rate * (1 + div / 2); |
| 341 | |
| 342 | config->parent_rate = clk_hw_get_rate(parent); |
| 343 | |
| 344 | if (config->parent_rate != rate) { |
| 345 | dev_err(dev, |
| 346 | "rate %lu Hz does not match input\n", |
| 347 | config->rate); |
| 348 | err = -EINVAL; |
| 349 | goto put; |
| 350 | } |
| 351 | } |
| 352 | } |
| 353 | |
| 354 | emc->provider = provider; |
| 355 | |
| 356 | return 0; |
| 357 | |
| 358 | put: |
| 359 | module_put(provider->owner); |
| 360 | return err; |
| 361 | } |
| 362 | EXPORT_SYMBOL_GPL(tegra210_clk_emc_attach); |
| 363 | |
| 364 | void tegra210_clk_emc_detach(struct clk *clk) |
| 365 | { |
| 366 | struct tegra210_clk_emc *emc = to_tegra210_clk_emc(__clk_get_hw(clk)); |
| 367 | |
| 368 | module_put(emc->provider->owner); |
| 369 | emc->provider = NULL; |
| 370 | } |
| 371 | EXPORT_SYMBOL_GPL(tegra210_clk_emc_detach); |