Peter Rosin | afda08c | 2017-05-14 21:51:14 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Multiplexer driver for Analog Devices ADG792A/G Triple 4:1 mux |
| 3 | * |
| 4 | * Copyright (C) 2017 Axentia Technologies AB |
| 5 | * |
| 6 | * Author: Peter Rosin <peda@axentia.se> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/err.h> |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/mux/driver.h> |
| 17 | #include <linux/property.h> |
| 18 | |
| 19 | #define ADG792A_LDSW BIT(0) |
| 20 | #define ADG792A_RESETB BIT(1) |
| 21 | #define ADG792A_DISABLE(mux) (0x50 | (mux)) |
| 22 | #define ADG792A_DISABLE_ALL (0x5f) |
| 23 | #define ADG792A_MUX(mux, state) (0xc0 | (((mux) + 1) << 2) | (state)) |
| 24 | #define ADG792A_MUX_ALL(state) (0xc0 | (state)) |
| 25 | |
| 26 | static int adg792a_write_cmd(struct i2c_client *i2c, u8 cmd, int reset) |
| 27 | { |
| 28 | u8 data = ADG792A_RESETB | ADG792A_LDSW; |
| 29 | |
| 30 | /* ADG792A_RESETB is active low, the chip resets when it is zero. */ |
| 31 | if (reset) |
| 32 | data &= ~ADG792A_RESETB; |
| 33 | |
| 34 | return i2c_smbus_write_byte_data(i2c, cmd, data); |
| 35 | } |
| 36 | |
| 37 | static int adg792a_set(struct mux_control *mux, int state) |
| 38 | { |
| 39 | struct i2c_client *i2c = to_i2c_client(mux->chip->dev.parent); |
| 40 | u8 cmd; |
| 41 | |
| 42 | if (mux->chip->controllers == 1) { |
| 43 | /* parallel mux controller operation */ |
| 44 | if (state == MUX_IDLE_DISCONNECT) |
| 45 | cmd = ADG792A_DISABLE_ALL; |
| 46 | else |
| 47 | cmd = ADG792A_MUX_ALL(state); |
| 48 | } else { |
| 49 | unsigned int controller = mux_control_get_index(mux); |
| 50 | |
| 51 | if (state == MUX_IDLE_DISCONNECT) |
| 52 | cmd = ADG792A_DISABLE(controller); |
| 53 | else |
| 54 | cmd = ADG792A_MUX(controller, state); |
| 55 | } |
| 56 | |
| 57 | return adg792a_write_cmd(i2c, cmd, 0); |
| 58 | } |
| 59 | |
| 60 | static const struct mux_control_ops adg792a_ops = { |
| 61 | .set = adg792a_set, |
| 62 | }; |
| 63 | |
| 64 | static int adg792a_probe(struct i2c_client *i2c, |
| 65 | const struct i2c_device_id *id) |
| 66 | { |
| 67 | struct device *dev = &i2c->dev; |
| 68 | struct mux_chip *mux_chip; |
| 69 | s32 idle_state[3]; |
| 70 | u32 cells; |
| 71 | int ret; |
| 72 | int i; |
| 73 | |
| 74 | if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 75 | return -ENODEV; |
| 76 | |
| 77 | ret = device_property_read_u32(dev, "#mux-control-cells", &cells); |
| 78 | if (ret < 0) |
| 79 | return ret; |
| 80 | if (cells >= 2) |
| 81 | return -EINVAL; |
| 82 | |
| 83 | mux_chip = devm_mux_chip_alloc(dev, cells ? 3 : 1, 0); |
| 84 | if (IS_ERR(mux_chip)) |
| 85 | return PTR_ERR(mux_chip); |
| 86 | |
| 87 | mux_chip->ops = &adg792a_ops; |
| 88 | |
| 89 | ret = adg792a_write_cmd(i2c, ADG792A_DISABLE_ALL, 1); |
| 90 | if (ret < 0) |
| 91 | return ret; |
| 92 | |
| 93 | ret = device_property_read_u32_array(dev, "idle-state", |
| 94 | (u32 *)idle_state, |
| 95 | mux_chip->controllers); |
| 96 | if (ret < 0) { |
| 97 | idle_state[0] = MUX_IDLE_AS_IS; |
| 98 | idle_state[1] = MUX_IDLE_AS_IS; |
| 99 | idle_state[2] = MUX_IDLE_AS_IS; |
| 100 | } |
| 101 | |
| 102 | for (i = 0; i < mux_chip->controllers; ++i) { |
| 103 | struct mux_control *mux = &mux_chip->mux[i]; |
| 104 | |
| 105 | mux->states = 4; |
| 106 | |
| 107 | switch (idle_state[i]) { |
| 108 | case MUX_IDLE_DISCONNECT: |
| 109 | case MUX_IDLE_AS_IS: |
| 110 | case 0 ... 4: |
| 111 | mux->idle_state = idle_state[i]; |
| 112 | break; |
| 113 | default: |
| 114 | dev_err(dev, "invalid idle-state %d\n", idle_state[i]); |
| 115 | return -EINVAL; |
| 116 | } |
| 117 | } |
| 118 | |
| 119 | ret = devm_mux_chip_register(dev, mux_chip); |
| 120 | if (ret < 0) |
| 121 | return ret; |
| 122 | |
| 123 | if (cells) |
| 124 | dev_info(dev, "3x single pole quadruple throw muxes registered\n"); |
| 125 | else |
| 126 | dev_info(dev, "triple pole quadruple throw mux registered\n"); |
| 127 | |
| 128 | return 0; |
| 129 | } |
| 130 | |
| 131 | static const struct i2c_device_id adg792a_id[] = { |
| 132 | { .name = "adg792a", }, |
| 133 | { .name = "adg792g", }, |
| 134 | { } |
| 135 | }; |
| 136 | MODULE_DEVICE_TABLE(i2c, adg792a_id); |
| 137 | |
| 138 | static const struct of_device_id adg792a_of_match[] = { |
| 139 | { .compatible = "adi,adg792a", }, |
| 140 | { .compatible = "adi,adg792g", }, |
| 141 | { } |
| 142 | }; |
| 143 | MODULE_DEVICE_TABLE(of, adg792a_of_match); |
| 144 | |
| 145 | static struct i2c_driver adg792a_driver = { |
| 146 | .driver = { |
| 147 | .name = "adg792a", |
| 148 | .of_match_table = of_match_ptr(adg792a_of_match), |
| 149 | }, |
| 150 | .probe = adg792a_probe, |
| 151 | .id_table = adg792a_id, |
| 152 | }; |
| 153 | module_i2c_driver(adg792a_driver); |
| 154 | |
| 155 | MODULE_DESCRIPTION("Analog Devices ADG792A/G Triple 4:1 mux driver"); |
| 156 | MODULE_AUTHOR("Peter Rosin <peda@axentia.se>"); |
| 157 | MODULE_LICENSE("GPL v2"); |