Matti Vaittinen | 32a4a4e | 2019-06-03 10:27:14 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | // |
| 3 | // Copyright (C) 2018 ROHM Semiconductors |
| 4 | // |
| 5 | // RTC driver for ROHM BD70528 PMIC |
| 6 | |
| 7 | #include <linux/bcd.h> |
| 8 | #include <linux/mfd/rohm-bd70528.h> |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/of.h> |
| 11 | #include <linux/platform_device.h> |
| 12 | #include <linux/regmap.h> |
| 13 | #include <linux/rtc.h> |
| 14 | |
| 15 | /* |
| 16 | * We read regs RTC_SEC => RTC_YEAR |
| 17 | * this struct is ordered according to chip registers. |
| 18 | * Keep it u8 only to avoid padding issues. |
| 19 | */ |
| 20 | struct bd70528_rtc_day { |
| 21 | u8 sec; |
| 22 | u8 min; |
| 23 | u8 hour; |
| 24 | } __packed; |
| 25 | |
| 26 | struct bd70528_rtc_data { |
| 27 | struct bd70528_rtc_day time; |
| 28 | u8 week; |
| 29 | u8 day; |
| 30 | u8 month; |
| 31 | u8 year; |
| 32 | } __packed; |
| 33 | |
| 34 | struct bd70528_rtc_wake { |
| 35 | struct bd70528_rtc_day time; |
| 36 | u8 ctrl; |
| 37 | } __packed; |
| 38 | |
| 39 | struct bd70528_rtc_alm { |
| 40 | struct bd70528_rtc_data data; |
| 41 | u8 alm_mask; |
| 42 | u8 alm_repeat; |
| 43 | } __packed; |
| 44 | |
| 45 | struct bd70528_rtc { |
| 46 | struct rohm_regmap_dev *mfd; |
| 47 | struct device *dev; |
| 48 | }; |
| 49 | |
| 50 | static int bd70528_set_wake(struct rohm_regmap_dev *bd70528, |
| 51 | int enable, int *old_state) |
| 52 | { |
| 53 | int ret; |
| 54 | unsigned int ctrl_reg; |
| 55 | |
| 56 | ret = regmap_read(bd70528->regmap, BD70528_REG_WAKE_EN, &ctrl_reg); |
| 57 | if (ret) |
| 58 | return ret; |
| 59 | |
| 60 | if (old_state) { |
| 61 | if (ctrl_reg & BD70528_MASK_WAKE_EN) |
| 62 | *old_state |= BD70528_WAKE_STATE_BIT; |
| 63 | else |
| 64 | *old_state &= ~BD70528_WAKE_STATE_BIT; |
| 65 | |
| 66 | if (!enable == !(*old_state & BD70528_WAKE_STATE_BIT)) |
| 67 | return 0; |
| 68 | } |
| 69 | |
| 70 | if (enable) |
| 71 | ctrl_reg |= BD70528_MASK_WAKE_EN; |
| 72 | else |
| 73 | ctrl_reg &= ~BD70528_MASK_WAKE_EN; |
| 74 | |
| 75 | return regmap_write(bd70528->regmap, BD70528_REG_WAKE_EN, |
| 76 | ctrl_reg); |
| 77 | } |
| 78 | |
| 79 | static int bd70528_set_elapsed_tmr(struct rohm_regmap_dev *bd70528, |
| 80 | int enable, int *old_state) |
| 81 | { |
| 82 | int ret; |
| 83 | unsigned int ctrl_reg; |
| 84 | |
| 85 | /* |
| 86 | * TBD |
| 87 | * What is the purpose of elapsed timer ? |
| 88 | * Is the timeout registers counting down, or is the disable - re-enable |
| 89 | * going to restart the elapsed-time counting? If counting is restarted |
| 90 | * the timeout should be decreased by the amount of time that has |
| 91 | * elapsed since starting the timer. Maybe we should store the monotonic |
| 92 | * clock value when timer is started so that if RTC is set while timer |
| 93 | * is armed we could do the compensation. This is a hack if RTC/system |
| 94 | * clk are drifting. OTOH, RTC controlled via I2C is in any case |
| 95 | * inaccurate... |
| 96 | */ |
| 97 | ret = regmap_read(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, |
| 98 | &ctrl_reg); |
| 99 | if (ret) |
| 100 | return ret; |
| 101 | |
| 102 | if (old_state) { |
| 103 | if (ctrl_reg & BD70528_MASK_ELAPSED_TIMER_EN) |
| 104 | *old_state |= BD70528_ELAPSED_STATE_BIT; |
| 105 | else |
| 106 | *old_state &= ~BD70528_ELAPSED_STATE_BIT; |
| 107 | |
| 108 | if ((!enable) == (!(*old_state & BD70528_ELAPSED_STATE_BIT))) |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | if (enable) |
| 113 | ctrl_reg |= BD70528_MASK_ELAPSED_TIMER_EN; |
| 114 | else |
| 115 | ctrl_reg &= ~BD70528_MASK_ELAPSED_TIMER_EN; |
| 116 | |
| 117 | return regmap_write(bd70528->regmap, BD70528_REG_ELAPSED_TIMER_EN, |
| 118 | ctrl_reg); |
| 119 | } |
| 120 | |
| 121 | static int bd70528_set_rtc_based_timers(struct bd70528_rtc *r, int new_state, |
| 122 | int *old_state) |
| 123 | { |
| 124 | int ret; |
| 125 | |
| 126 | ret = bd70528_wdt_set(r->mfd, new_state & BD70528_WDT_STATE_BIT, |
| 127 | old_state); |
| 128 | if (ret) { |
| 129 | dev_err(r->dev, |
| 130 | "Failed to disable WDG for RTC setting (%d)\n", ret); |
| 131 | return ret; |
| 132 | } |
| 133 | ret = bd70528_set_elapsed_tmr(r->mfd, |
| 134 | new_state & BD70528_ELAPSED_STATE_BIT, |
| 135 | old_state); |
| 136 | if (ret) { |
| 137 | dev_err(r->dev, |
| 138 | "Failed to disable 'elapsed timer' for RTC setting\n"); |
| 139 | return ret; |
| 140 | } |
| 141 | ret = bd70528_set_wake(r->mfd, new_state & BD70528_WAKE_STATE_BIT, |
| 142 | old_state); |
| 143 | if (ret) { |
| 144 | dev_err(r->dev, |
| 145 | "Failed to disable 'wake timer' for RTC setting\n"); |
| 146 | return ret; |
| 147 | } |
| 148 | |
| 149 | return ret; |
| 150 | } |
| 151 | |
| 152 | static int bd70528_re_enable_rtc_based_timers(struct bd70528_rtc *r, |
| 153 | int old_state) |
| 154 | { |
| 155 | return bd70528_set_rtc_based_timers(r, old_state, NULL); |
| 156 | } |
| 157 | |
| 158 | static int bd70528_disable_rtc_based_timers(struct bd70528_rtc *r, |
| 159 | int *old_state) |
| 160 | { |
| 161 | return bd70528_set_rtc_based_timers(r, 0, old_state); |
| 162 | } |
| 163 | |
| 164 | static inline void tmday2rtc(struct rtc_time *t, struct bd70528_rtc_day *d) |
| 165 | { |
| 166 | d->sec &= ~BD70528_MASK_RTC_SEC; |
| 167 | d->min &= ~BD70528_MASK_RTC_MINUTE; |
| 168 | d->hour &= ~BD70528_MASK_RTC_HOUR; |
| 169 | d->sec |= bin2bcd(t->tm_sec); |
| 170 | d->min |= bin2bcd(t->tm_min); |
| 171 | d->hour |= bin2bcd(t->tm_hour); |
| 172 | } |
| 173 | |
| 174 | static inline void tm2rtc(struct rtc_time *t, struct bd70528_rtc_data *r) |
| 175 | { |
| 176 | r->day &= ~BD70528_MASK_RTC_DAY; |
| 177 | r->week &= ~BD70528_MASK_RTC_WEEK; |
| 178 | r->month &= ~BD70528_MASK_RTC_MONTH; |
| 179 | /* |
| 180 | * PM and 24H bits are not used by Wake - thus we clear them |
| 181 | * here and not in tmday2rtc() which is also used by wake. |
| 182 | */ |
| 183 | r->time.hour &= ~(BD70528_MASK_RTC_HOUR_PM | BD70528_MASK_RTC_HOUR_24H); |
| 184 | |
| 185 | tmday2rtc(t, &r->time); |
| 186 | /* |
| 187 | * We do always set time in 24H mode. |
| 188 | */ |
| 189 | r->time.hour |= BD70528_MASK_RTC_HOUR_24H; |
| 190 | r->day |= bin2bcd(t->tm_mday); |
| 191 | r->week |= bin2bcd(t->tm_wday); |
| 192 | r->month |= bin2bcd(t->tm_mon + 1); |
| 193 | r->year = bin2bcd(t->tm_year - 100); |
| 194 | } |
| 195 | |
| 196 | static inline void rtc2tm(struct bd70528_rtc_data *r, struct rtc_time *t) |
| 197 | { |
| 198 | t->tm_sec = bcd2bin(r->time.sec & BD70528_MASK_RTC_SEC); |
| 199 | t->tm_min = bcd2bin(r->time.min & BD70528_MASK_RTC_MINUTE); |
| 200 | t->tm_hour = bcd2bin(r->time.hour & BD70528_MASK_RTC_HOUR); |
| 201 | /* |
| 202 | * If RTC is in 12H mode, then bit BD70528_MASK_RTC_HOUR_PM |
| 203 | * is not BCD value but tells whether it is AM or PM |
| 204 | */ |
| 205 | if (!(r->time.hour & BD70528_MASK_RTC_HOUR_24H)) { |
| 206 | t->tm_hour %= 12; |
| 207 | if (r->time.hour & BD70528_MASK_RTC_HOUR_PM) |
| 208 | t->tm_hour += 12; |
| 209 | } |
| 210 | t->tm_mday = bcd2bin(r->day & BD70528_MASK_RTC_DAY); |
| 211 | t->tm_mon = bcd2bin(r->month & BD70528_MASK_RTC_MONTH) - 1; |
| 212 | t->tm_year = 100 + bcd2bin(r->year & BD70528_MASK_RTC_YEAR); |
| 213 | t->tm_wday = bcd2bin(r->week & BD70528_MASK_RTC_WEEK); |
| 214 | } |
| 215 | |
| 216 | static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a) |
| 217 | { |
| 218 | struct bd70528_rtc_wake wake; |
| 219 | struct bd70528_rtc_alm alm; |
| 220 | int ret; |
| 221 | struct bd70528_rtc *r = dev_get_drvdata(dev); |
| 222 | struct rohm_regmap_dev *bd70528 = r->mfd; |
| 223 | |
| 224 | ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_WAKE_START, |
| 225 | &wake, sizeof(wake)); |
| 226 | if (ret) { |
| 227 | dev_err(dev, "Failed to read wake regs\n"); |
| 228 | return ret; |
| 229 | } |
| 230 | |
| 231 | ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_ALM_START, |
| 232 | &alm, sizeof(alm)); |
| 233 | if (ret) { |
| 234 | dev_err(dev, "Failed to read alarm regs\n"); |
| 235 | return ret; |
| 236 | } |
| 237 | |
| 238 | tm2rtc(&a->time, &alm.data); |
| 239 | tmday2rtc(&a->time, &wake.time); |
| 240 | |
| 241 | if (a->enabled) { |
| 242 | alm.alm_mask &= ~BD70528_MASK_ALM_EN; |
| 243 | wake.ctrl |= BD70528_MASK_WAKE_EN; |
| 244 | } else { |
| 245 | alm.alm_mask |= BD70528_MASK_ALM_EN; |
| 246 | wake.ctrl &= ~BD70528_MASK_WAKE_EN; |
| 247 | } |
| 248 | |
| 249 | ret = regmap_bulk_write(bd70528->regmap, |
| 250 | BD70528_REG_RTC_WAKE_START, &wake, |
| 251 | sizeof(wake)); |
| 252 | if (ret) { |
| 253 | dev_err(dev, "Failed to set wake time\n"); |
| 254 | return ret; |
| 255 | } |
| 256 | ret = regmap_bulk_write(bd70528->regmap, BD70528_REG_RTC_ALM_START, |
| 257 | &alm, sizeof(alm)); |
| 258 | if (ret) |
| 259 | dev_err(dev, "Failed to set alarm time\n"); |
| 260 | |
| 261 | return ret; |
| 262 | } |
| 263 | |
| 264 | static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a) |
| 265 | { |
| 266 | struct bd70528_rtc_alm alm; |
| 267 | int ret; |
| 268 | struct bd70528_rtc *r = dev_get_drvdata(dev); |
| 269 | struct rohm_regmap_dev *bd70528 = r->mfd; |
| 270 | |
| 271 | ret = regmap_bulk_read(bd70528->regmap, BD70528_REG_RTC_ALM_START, |
| 272 | &alm, sizeof(alm)); |
| 273 | if (ret) { |
| 274 | dev_err(dev, "Failed to read alarm regs\n"); |
| 275 | return ret; |
| 276 | } |
| 277 | |
| 278 | rtc2tm(&alm.data, &a->time); |
| 279 | a->time.tm_mday = -1; |
| 280 | a->time.tm_mon = -1; |
| 281 | a->time.tm_year = -1; |
| 282 | a->enabled = !(alm.alm_mask & BD70528_MASK_ALM_EN); |
| 283 | a->pending = 0; |
| 284 | |
| 285 | return 0; |
| 286 | } |
| 287 | |
| 288 | static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t) |
| 289 | { |
| 290 | int ret, tmpret, old_states; |
| 291 | struct bd70528_rtc_data rtc_data; |
| 292 | struct bd70528_rtc *r = dev_get_drvdata(dev); |
| 293 | struct rohm_regmap_dev *bd70528 = r->mfd; |
| 294 | |
| 295 | ret = bd70528_disable_rtc_based_timers(r, &old_states); |
| 296 | if (ret) |
| 297 | return ret; |
| 298 | |
| 299 | tmpret = regmap_bulk_read(bd70528->regmap, |
| 300 | BD70528_REG_RTC_START, &rtc_data, |
| 301 | sizeof(rtc_data)); |
| 302 | if (tmpret) { |
| 303 | dev_err(dev, "Failed to read RTC time registers\n"); |
| 304 | goto renable_out; |
| 305 | } |
| 306 | tm2rtc(t, &rtc_data); |
| 307 | |
| 308 | tmpret = regmap_bulk_write(bd70528->regmap, |
| 309 | BD70528_REG_RTC_START, &rtc_data, |
| 310 | sizeof(rtc_data)); |
| 311 | if (tmpret) { |
| 312 | dev_err(dev, "Failed to set RTC time\n"); |
| 313 | goto renable_out; |
| 314 | } |
| 315 | |
| 316 | renable_out: |
| 317 | ret = bd70528_re_enable_rtc_based_timers(r, old_states); |
| 318 | if (tmpret) |
| 319 | ret = tmpret; |
| 320 | |
| 321 | return ret; |
| 322 | } |
| 323 | |
| 324 | static int bd70528_set_time(struct device *dev, struct rtc_time *t) |
| 325 | { |
| 326 | int ret; |
| 327 | struct bd70528_rtc *r = dev_get_drvdata(dev); |
| 328 | |
| 329 | bd70528_wdt_lock(r->mfd); |
| 330 | ret = bd70528_set_time_locked(dev, t); |
| 331 | bd70528_wdt_unlock(r->mfd); |
| 332 | return ret; |
| 333 | } |
| 334 | |
| 335 | static int bd70528_get_time(struct device *dev, struct rtc_time *t) |
| 336 | { |
| 337 | struct bd70528_rtc *r = dev_get_drvdata(dev); |
| 338 | struct rohm_regmap_dev *bd70528 = r->mfd; |
| 339 | struct bd70528_rtc_data rtc_data; |
| 340 | int ret; |
| 341 | |
| 342 | /* read the RTC date and time registers all at once */ |
| 343 | ret = regmap_bulk_read(bd70528->regmap, |
| 344 | BD70528_REG_RTC_START, &rtc_data, |
| 345 | sizeof(rtc_data)); |
| 346 | if (ret) { |
| 347 | dev_err(dev, "Failed to read RTC time (err %d)\n", ret); |
| 348 | return ret; |
| 349 | } |
| 350 | |
| 351 | rtc2tm(&rtc_data, t); |
| 352 | |
| 353 | return 0; |
| 354 | } |
| 355 | |
| 356 | static int bd70528_alm_enable(struct device *dev, unsigned int enabled) |
| 357 | { |
| 358 | int ret; |
| 359 | unsigned int enableval = BD70528_MASK_ALM_EN; |
| 360 | struct bd70528_rtc *r = dev_get_drvdata(dev); |
| 361 | |
| 362 | if (enabled) |
| 363 | enableval = 0; |
| 364 | |
| 365 | bd70528_wdt_lock(r->mfd); |
| 366 | ret = bd70528_set_wake(r->mfd, enabled, NULL); |
| 367 | if (ret) { |
| 368 | dev_err(dev, "Failed to change wake state\n"); |
| 369 | goto out_unlock; |
| 370 | } |
| 371 | ret = regmap_update_bits(r->mfd->regmap, BD70528_REG_RTC_ALM_MASK, |
| 372 | BD70528_MASK_ALM_EN, enableval); |
| 373 | if (ret) |
| 374 | dev_err(dev, "Failed to change alarm state\n"); |
| 375 | |
| 376 | out_unlock: |
| 377 | bd70528_wdt_unlock(r->mfd); |
| 378 | return ret; |
| 379 | } |
| 380 | |
| 381 | static const struct rtc_class_ops bd70528_rtc_ops = { |
| 382 | .read_time = bd70528_get_time, |
| 383 | .set_time = bd70528_set_time, |
| 384 | .read_alarm = bd70528_read_alarm, |
| 385 | .set_alarm = bd70528_set_alarm, |
| 386 | .alarm_irq_enable = bd70528_alm_enable, |
| 387 | }; |
| 388 | |
| 389 | static irqreturn_t alm_hndlr(int irq, void *data) |
| 390 | { |
| 391 | struct rtc_device *rtc = data; |
| 392 | |
| 393 | rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF | RTC_PF); |
| 394 | return IRQ_HANDLED; |
| 395 | } |
| 396 | |
| 397 | static int bd70528_probe(struct platform_device *pdev) |
| 398 | { |
| 399 | struct bd70528_rtc *bd_rtc; |
| 400 | struct rohm_regmap_dev *mfd; |
| 401 | int ret; |
| 402 | struct rtc_device *rtc; |
| 403 | int irq; |
| 404 | unsigned int hr; |
| 405 | |
| 406 | mfd = dev_get_drvdata(pdev->dev.parent); |
| 407 | if (!mfd) { |
| 408 | dev_err(&pdev->dev, "No MFD driver data\n"); |
| 409 | return -EINVAL; |
| 410 | } |
| 411 | bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL); |
| 412 | if (!bd_rtc) |
| 413 | return -ENOMEM; |
| 414 | |
| 415 | bd_rtc->mfd = mfd; |
| 416 | bd_rtc->dev = &pdev->dev; |
| 417 | |
| 418 | irq = platform_get_irq_byname(pdev, "bd70528-rtc-alm"); |
| 419 | |
| 420 | if (irq < 0) { |
| 421 | dev_err(&pdev->dev, "Failed to get irq\n"); |
| 422 | return irq; |
| 423 | } |
| 424 | |
| 425 | platform_set_drvdata(pdev, bd_rtc); |
| 426 | |
| 427 | ret = regmap_read(mfd->regmap, BD70528_REG_RTC_HOUR, &hr); |
| 428 | |
| 429 | if (ret) { |
| 430 | dev_err(&pdev->dev, "Failed to reag RTC clock\n"); |
| 431 | return ret; |
| 432 | } |
| 433 | |
| 434 | if (!(hr & BD70528_MASK_RTC_HOUR_24H)) { |
| 435 | struct rtc_time t; |
| 436 | |
| 437 | ret = bd70528_get_time(&pdev->dev, &t); |
| 438 | |
| 439 | if (!ret) |
| 440 | ret = bd70528_set_time(&pdev->dev, &t); |
| 441 | |
| 442 | if (ret) { |
| 443 | dev_err(&pdev->dev, |
| 444 | "Setting 24H clock for RTC failed\n"); |
| 445 | return ret; |
| 446 | } |
| 447 | } |
| 448 | |
| 449 | device_set_wakeup_capable(&pdev->dev, true); |
| 450 | device_wakeup_enable(&pdev->dev); |
| 451 | |
| 452 | rtc = devm_rtc_allocate_device(&pdev->dev); |
| 453 | if (IS_ERR(rtc)) { |
| 454 | dev_err(&pdev->dev, "RTC device creation failed\n"); |
| 455 | return PTR_ERR(rtc); |
| 456 | } |
| 457 | |
| 458 | rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; |
| 459 | rtc->range_max = RTC_TIMESTAMP_END_2099; |
| 460 | rtc->ops = &bd70528_rtc_ops; |
| 461 | |
| 462 | /* Request alarm IRQ prior to registerig the RTC */ |
| 463 | ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, &alm_hndlr, |
| 464 | IRQF_ONESHOT, "bd70528-rtc", rtc); |
| 465 | if (ret) |
| 466 | return ret; |
| 467 | |
| 468 | /* |
| 469 | * BD70528 irq controller is not touching the main mask register. |
| 470 | * So enable the RTC block interrupts at main level. We can just |
| 471 | * leave them enabled as irq-controller should disable irqs |
| 472 | * from sub-registers when IRQ is disabled or freed. |
| 473 | */ |
| 474 | ret = regmap_update_bits(mfd->regmap, |
| 475 | BD70528_REG_INT_MAIN_MASK, |
| 476 | BD70528_INT_RTC_MASK, 0); |
| 477 | if (ret) { |
| 478 | dev_err(&pdev->dev, "Failed to enable RTC interrupts\n"); |
| 479 | return ret; |
| 480 | } |
| 481 | |
| 482 | ret = rtc_register_device(rtc); |
| 483 | if (ret) |
| 484 | dev_err(&pdev->dev, "Registering RTC failed\n"); |
| 485 | |
| 486 | return ret; |
| 487 | } |
| 488 | |
| 489 | static struct platform_driver bd70528_rtc = { |
| 490 | .driver = { |
| 491 | .name = "bd70528-rtc" |
| 492 | }, |
| 493 | .probe = bd70528_probe, |
| 494 | }; |
| 495 | |
| 496 | module_platform_driver(bd70528_rtc); |
| 497 | |
| 498 | MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); |
| 499 | MODULE_DESCRIPTION("BD70528 RTC driver"); |
| 500 | MODULE_LICENSE("GPL"); |