blob: 5d9f5ea787001ecf8f715f38c83e91e22c804cb5 [file] [log] [blame]
Valentin Longchamp0510c8a2012-09-04 11:55:02 +02001/dts-v1/;
2
3/include/ "kirkwood.dtsi"
Valentin Longchamp9891b3f2012-11-17 17:00:56 +01004/include/ "kirkwood-98dx4122.dtsi"
Valentin Longchamp0510c8a2012-09-04 11:55:02 +02005
6/ {
7 model = "Keymile Kirkwood Reference Design";
8 compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x08000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk";
17 };
18
19 ocp@f1000000 {
Valentin Longchamp9891b3f2012-11-17 17:00:56 +010020 pinctrl: pinctrl@10000 {
Thomas Petazzoni06dbf3e2013-05-24 11:44:49 +020021 pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
Valentin Longchamp9891b3f2012-11-17 17:00:56 +010022 pinctrl-names = "default";
23
24 pmx_i2c_gpio_sda: pmx-gpio-sda {
25 marvell,pins = "mpp8";
26 marvell,function = "gpio";
27 };
28 pmx_i2c_gpio_scl: pmx-gpio-scl {
29 marvell,pins = "mpp9";
30 marvell,function = "gpio";
31 };
32 };
33
Valentin Longchamp0510c8a2012-09-04 11:55:02 +020034 serial@12000 {
Valentin Longchamp0510c8a2012-09-04 11:55:02 +020035 status = "ok";
36 };
37
38 nand@3000000 {
Thomas Petazzoni06dbf3e2013-05-24 11:44:49 +020039 pinctrl-0 = <&pmx_nand>;
40 pinctrl-names = "default";
Valentin Longchamp0510c8a2012-09-04 11:55:02 +020041 status = "ok";
42 chip-delay = <25>;
43 };
44 };
Valentin Longchampe45498c2013-05-27 17:55:26 +020045
46 i2c@0 {
47 compatible = "i2c-gpio";
48 gpios = < &gpio0 8 0 /* sda */
49 &gpio0 9 0 >; /* scl */
50 i2c-gpio,delay-us = <2>; /* ~100 kHz */
51 };
Valentin Longchamp0510c8a2012-09-04 11:55:02 +020052};