Gitiles
Code Review Sign In
review.shift-gmbh.com / SHIFTPHONES / kernel / common / bc407334e9a6a745de5360395282beb2690adf48 / . / drivers / regulator / Kconfig
blob: 9869064f9f0309e4857d5584a39fabcbba27165c [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Chao Xie95f1dc02013-07-17 23:07:03 -0400[diff] [blame]67config REGULATOR_88PM800
68 tristate "Marvell 88PM800 Power regulators"
Axel Lin7c45f602013-07-19 09:17:53 +0800[diff] [blame]69 depends on MFD_88PM800
Chao Xie95f1dc02013-07-17 23:07:03 -0400[diff] [blame]70 help
71 This driver supports Marvell 88PM800 voltage regulator chips.
72 It delivers digitally programmable output,
73 the voltage is programmed via I2C interface.
74 It's suitable to support PXA988 chips to control VCC_MAIN and
75 various voltages.
76
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]77config REGULATOR_88PM8607
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]78 tristate "Marvell 88PM8607 Power regulators"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]79 depends on MFD_88PM860X=y
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]80 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]81 This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]82
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]83config REGULATOR_AD5398
84 tristate "Analog Devices AD5398/AD5821 regulators"
85 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]86 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]87 This driver supports AD5398 and AD5821 current regulator chips.
88 If building into module, its name is ad5398.ko.
89
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]90config REGULATOR_ANATOP
91 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
92 depends on MFD_SYSCON
93 help
94 Say y here to support Freescale i.MX on-chip ANATOP LDOs
95 regulators. It is recommended that this option be
96 enabled on i.MX6 platform.
97
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]98config REGULATOR_AAT2870
99 tristate "AnalogicTech AAT2870 Regulators"
100 depends on MFD_AAT2870_CORE
101 help
102 If you have a AnalogicTech AAT2870 say Y to enable the
103 regulator driver.
104
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]105config REGULATOR_AB3100
106 tristate "ST-Ericsson AB3100 Regulator functions"
107 depends on AB3100_CORE
108 default y if AB3100_CORE
109 help
110 These regulators correspond to functionality in the
111 AB3100 analog baseband dealing with power regulators
112 for the system.
113
114config REGULATOR_AB8500
115 bool "ST-Ericsson AB8500 Power Regulators"
116 depends on AB8500_CORE
117 help
118 This driver supports the regulators found on the ST-Ericsson mixed
119 signal AB8500 PMIC
120
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]121config REGULATOR_ARIZONA
122 tristate "Wolfson Arizona class devices"
123 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame]124 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]125 help
126 Support for the regulators found on Wolfson Arizona class
127 devices.
128
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]129config REGULATOR_AS3711
130 tristate "AS3711 PMIC"
131 depends on MFD_AS3711
132 help
133 This driver provides support for the voltage regulators on the
134 AS3711 PMIC
135
Laxman Dewanganbc407332013-09-20 18:00:13 +0530[diff] [blame^]136config REGULATOR_AS3722
137 tristate "AMS AS3722 PMIC Regulators"
138 depends on MFD_AS3722
139 help
140 This driver provides support for the voltage regulators on the
141 AS3722 PMIC. This will enable support for all the software
142 controllable DCDC/LDO regulators.
143
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]144config REGULATOR_DA903X
145 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
146 depends on PMIC_DA903X
147 help
148 Say y here to support the BUCKs and LDOs regulators found on
149 Dialog Semiconductor DA9030/DA9034 PMIC.
150
151config REGULATOR_DA9052
152 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
153 depends on PMIC_DA9052
154 help
155 This driver supports the voltage regulators of DA9052-BC and
156 DA9053-AA/Bx PMIC.
157
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]158config REGULATOR_DA9055
159 tristate "Dialog Semiconductor DA9055 regulators"
160 depends on MFD_DA9055
161 help
162 Say y here to support the BUCKs and LDOs regulators found on
163 Dialog Semiconductor DA9055 PMIC.
164
165 This driver can also be built as a module. If so, the module
166 will be called da9055-regulator.
167
Krystian Garbaciak69ca3e52013-07-29 19:00:45 +0200[diff] [blame]168config REGULATOR_DA9063
169 tristate "Dialog Semiconductor DA9063 regulators"
170 depends on MFD_DA9063
171 help
172 Say y here to support the BUCKs and LDOs regulators found on
173 DA9063 PMICs.
174
175 This driver can also be built as a module. If so, the module
176 will be called da9063-regulator.
177
Steve Twiss16f10912013-08-06 15:30:48 +0100[diff] [blame]178config REGULATOR_DA9210
179 tristate "Dialog Semiconductor DA9210 regulator"
180 depends on I2C
181 select REGMAP_I2C
182 help
183 Say y here to support for the Dialog Semiconductor DA9210.
184 The DA9210 is a multi-phase synchronous step down
185 converter 12A DC-DC Buck controlled through an I2C
186 interface.
187
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]188config REGULATOR_DBX500_PRCMU
189 bool
190
191config REGULATOR_DB8500_PRCMU
192 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
193 depends on MFD_DB8500_PRCMU
194 select REGULATOR_DBX500_PRCMU
195 help
196 This driver supports the voltage domain regulators controlled by the
197 DB8500 PRCMU
198
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]199config REGULATOR_FAN53555
200 tristate "Fairchild FAN53555 Regulator"
201 depends on I2C
202 select REGMAP_I2C
203 help
204 This driver supports Fairchild FAN53555 Digitally Programmable
205 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
206 regulator that delivers a digitally programmable output from an
207 input voltage supply of 2.5V to 5.5V. The output voltage is
208 programmed through an I2C interface.
209
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]210config REGULATOR_GPIO
211 tristate "GPIO regulator support"
212 depends on GPIOLIB
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]213 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]214 This driver provides support for regulators that can be
215 controlled via gpios.
216 It is capable of supporting current and voltage regulators
217 and the platform has to provide a mapping of GPIO-states
218 to target volts/amps.
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]219
220config REGULATOR_ISL6271A
221 tristate "Intersil ISL6271A Power regulator"
222 depends on I2C
223 help
224 This driver supports ISL6271A voltage regulator chip.
225
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]226config REGULATOR_LP3971
227 tristate "National Semiconductors LP3971 PMIC regulator driver"
228 depends on I2C
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]229 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]230 Say Y here to support the voltage regulators and convertors
231 on National Semiconductors LP3971 PMIC
232
233config REGULATOR_LP3972
234 tristate "National Semiconductors LP3972 PMIC regulator driver"
235 depends on I2C
236 help
237 Say Y here to support the voltage regulators and convertors
238 on National Semiconductors LP3972 PMIC
239
240config REGULATOR_LP872X
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]241 tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Axel Lin613965f2013-08-30 22:13:44 +0800[diff] [blame]242 depends on I2C
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]243 select REGMAP_I2C
244 help
245 This driver supports LP8720/LP8725 PMIC
246
247config REGULATOR_LP8755
248 tristate "TI LP8755 High Performance PMU driver"
249 depends on I2C
250 select REGMAP_I2C
251 help
252 This driver supports LP8755 High Performance PMU driver. This
253 chip contains six step-down DC/DC converters which can support
254 9 mode multiphase configuration.
255
256config REGULATOR_LP8788
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]257 tristate "TI LP8788 Power Regulators"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]258 depends on MFD_LP8788
259 help
260 This driver supports LP8788 voltage regulator chip.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]261
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]262config REGULATOR_MAX1586
263 tristate "Maxim 1586/1587 voltage regulator"
264 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]265 help
266 This driver controls a Maxim 1586 or 1587 voltage output
267 regulator via I2C bus. The provided regulator is suitable
268 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
269
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]270config REGULATOR_MAX8649
271 tristate "Maxim 8649 voltage regulator"
272 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]273 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]274 help
275 This driver controls a Maxim 8649 voltage output regulator via
276 I2C bus.
277
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]278config REGULATOR_MAX8660
279 tristate "Maxim 8660/8661 voltage regulator"
280 depends on I2C
281 help
282 This driver controls a Maxim 8660/8661 voltage output
283 regulator via I2C bus.
284
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]285config REGULATOR_MAX8907
286 tristate "Maxim 8907 voltage regulator"
287 depends on MFD_MAX8907
288 help
289 This driver controls a Maxim 8907 voltage output regulator
290 via I2C bus. The provided regulator is suitable for Tegra
291 chip to control Step-Down DC-DC and LDOs.
292
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]293config REGULATOR_MAX8925
294 tristate "Maxim MAX8925 Power Management IC"
295 depends on MFD_MAX8925
296 help
297 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
298
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]299config REGULATOR_MAX8952
300 tristate "Maxim MAX8952 Power Management IC"
301 depends on I2C
302 help
303 This driver controls a Maxim 8952 voltage output regulator
304 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
305 modes ranging from 0.77V to 1.40V by 0.01V steps.
306
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]307config REGULATOR_MAX8973
308 tristate "Maxim MAX8973 voltage regulator "
309 depends on I2C
310 select REGMAP_I2C
311 help
312 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
313 switching regulator delievers up to 9A of output current. Each
314 phase operates at a 2MHz fixed frequency with a 120 deg shift
315 from the adjacent phase, allowing the use of small magnetic component.
316
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]317config REGULATOR_MAX8997
318 tristate "Maxim 8997/8966 regulator"
319 depends on MFD_MAX8997
320 help
321 This driver controls a Maxim 8997/8966 regulator
322 via I2C bus. The provided regulator is suitable for S5PC110,
323 S5PV210, and Exynos-4 chips to control VCC_CORE and
324 VCC_USIM voltages.
325
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]326config REGULATOR_MAX8998
327 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]328 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]329 help
330 This driver controls a Maxim 8998 voltage output regulator
331 via I2C bus. The provided regulator is suitable for S3C6410
332 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
333
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]334config REGULATOR_MAX77686
335 tristate "Maxim 77686 regulator"
336 depends on MFD_MAX77686
337 help
338 This driver controls a Maxim 77686 regulator
339 via I2C bus. The provided regulator is suitable for
340 Exynos-4 chips to control VARM and VINT voltages.
341
Jonghwa Lee80b022e2013-06-25 10:08:38 +0900[diff] [blame]342config REGULATOR_MAX77693
343 tristate "Maxim MAX77693 regulator"
344 depends on MFD_MAX77693
345 help
346 This driver controls a Maxim 77693 regulator via I2C bus.
347 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
348 and one current regulator 'CHARGER'. This is suitable for
349 Exynos-4x12 chips.
350
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]351config REGULATOR_MC13XXX_CORE
352 tristate
353
354config REGULATOR_MC13783
355 tristate "Freescale MC13783 regulator driver"
356 depends on MFD_MC13783
357 select REGULATOR_MC13XXX_CORE
358 help
359 Say y here to support the regulators found on the Freescale MC13783
360 PMIC.
361
362config REGULATOR_MC13892
363 tristate "Freescale MC13892 regulator driver"
364 depends on MFD_MC13XXX
365 select REGULATOR_MC13XXX_CORE
366 help
367 Say y here to support the regulators found on the Freescale MC13892
368 PMIC.
369
370config REGULATOR_PALMAS
371 tristate "TI Palmas PMIC Regulators"
372 depends on MFD_PALMAS
373 help
374 If you wish to control the regulators on the Palmas series of
375 chips say Y here. This will enable support for all the software
376 controllable SMPS/LDO regulators.
377
378 The regulators available on Palmas series chips vary depending
379 on the muxing. This is handled automatically in the driver by
380 reading the mux info from OTP.
381
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]382config REGULATOR_PCAP
383 tristate "Motorola PCAP2 regulator driver"
384 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]385 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]386 This driver provides support for the voltage regulators of the
387 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]388
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]389config REGULATOR_PCF50633
390 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]391 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]392 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]393 Say Y here to support the voltage regulators and convertors
394 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]395
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]396config REGULATOR_PFUZE100
397 tristate "Support regulators on Freescale PFUZE100 PMIC"
398 depends on I2C
Axel Lin94421b02013-07-29 12:08:01 +0800[diff] [blame]399 select REGMAP_I2C
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]400 help
401 Say y here to support the regulators found on the Freescale PFUZE100
402 PMIC.
403
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]404config REGULATOR_RC5T583
405 tristate "RICOH RC5T583 Power regulators"
406 depends on MFD_RC5T583
407 help
408 Select this option to enable the power regulator of RICOH
409 PMIC RC5T583.
410 This driver supports the control of different power rails of device
411 through regulator interface. The device supports multiple DCDC/LDO
412 outputs which can be controlled by i2c communication.
413
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]414config REGULATOR_S2MPS11
415 tristate "Samsung S2MPS11 voltage regulator"
416 depends on MFD_SEC_CORE
417 help
418 This driver supports a Samsung S2MPS11 voltage output regulator
419 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
420 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
421
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]422config REGULATOR_S5M8767
423 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]424 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]425 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]426 This driver supports a Samsung S5M8767A voltage output regulator
427 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
428 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]429
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]430config REGULATOR_TI_ABB
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]431 tristate "TI Adaptive Body Bias on-chip LDO"
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]432 depends on ARCH_OMAP
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]433 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]434 Select this option to support Texas Instruments' on-chip Adaptive Body
435 Bias (ABB) LDO regulators. It is recommended that this option be
436 enabled on required TI SoC. Certain Operating Performance Points
437 on TI SoCs may be unstable without enabling this as it provides
438 device specific optimized bias to allow/optimize functionality.
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]439
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]440config REGULATOR_TPS51632
441 tristate "TI TPS51632 Power Regulator"
442 depends on I2C
443 select REGMAP_I2C
444 help
445 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]446 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]447 with Serial VID control and DVFS.
448 The voltage output can be configure through I2C interface or PWM
449 interface.
450
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]451config REGULATOR_TPS6105X
452 tristate "TI TPS6105X Power regulators"
453 depends on TPS6105X
454 default y if TPS6105X
455 help
456 This driver supports TPS61050/TPS61052 voltage regulator chips.
457 It is a single boost converter primarily for white LEDs and
458 audio amplifiers.
459
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]460config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]461 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]462 depends on I2C
463 select REGMAP_I2C
464 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]465 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]466 regulator is meant for processor core supply. This chip is
467 high-frequency synchronous step down dc-dc converter optimized
468 for battery-powered portable applications.
469
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]470config REGULATOR_TPS65023
471 tristate "TI TPS65023 Power regulators"
472 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]473 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]474 help
475 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
476 three step-down converters and two general-purpose LDO voltage regulators.
477 It supports TI's software based Class-2 SmartReflex implementation.
478
479config REGULATOR_TPS6507X
480 tristate "TI TPS6507X Power regulators"
481 depends on I2C
482 help
483 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
484 three step-down converters and two general-purpose LDO voltage regulators.
485 It supports TI's software based Class-2 SmartReflex implementation.
486
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]487config REGULATOR_TPS65090
488 tristate "TI TPS65090 Power regulator"
489 depends on MFD_TPS65090
490 help
491 This driver provides support for the voltage regulators on the
492 TI TPS65090 PMIC.
493
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]494config REGULATOR_TPS65217
495 tristate "TI TPS65217 Power regulators"
496 depends on MFD_TPS65217
497 help
498 This driver supports TPS65217 voltage regulator chips. TPS65217
499 provides three step-down converters and four general-purpose LDO
500 voltage regulators. It supports software based voltage control
501 for different voltage domains
502
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]503config REGULATOR_TPS6524X
504 tristate "TI TPS6524X Power regulators"
505 depends on SPI
506 help
507 This driver supports TPS6524X voltage regulator chips. TPS6524X
508 provides three step-down converters and two general-purpose LDO
509 voltage regulators. This device is interfaced using a customized
510 serial interface currently supported on the sequencer serial
511 port controller.
512
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]513config REGULATOR_TPS6586X
514 tristate "TI TPS6586X Power regulators"
515 depends on MFD_TPS6586X
516 help
517 This driver supports TPS6586X voltage regulator chips.
518
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]519config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]520 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]521 depends on MFD_TPS65910
522 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]523 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]524
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]525config REGULATOR_TPS65912
526 tristate "TI TPS65912 Power regulator"
527 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]528 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]529 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]530
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]531config REGULATOR_TPS80031
532 tristate "TI TPS80031/TPS80032 power regualtor driver"
533 depends on MFD_TPS80031
534 help
535 TPS80031/ TPS80032 Fully Integrated Power Management with Power
536 Path and Battery Charger. It has 5 configurable step-down
537 converters, 11 general purpose LDOs, VBUS generator and digital
538 output to control regulators.
539
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]540config REGULATOR_TWL4030
Mark Brown631a1fc2013-07-29 16:49:46 +0100[diff] [blame]541 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]542 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]543 help
544 This driver supports the voltage regulators provided by
545 this family of companion chips.
546
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]547config REGULATOR_VEXPRESS
548 tristate "Versatile Express regulators"
549 depends on VEXPRESS_CONFIG
550 help
551 This driver provides support for voltage regulators available
552 on the ARM Ltd's Versatile Express platform.
553
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]554config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]555 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]556 depends on MFD_WM831X
557 help
558 Support the voltage and current regulators of the WM831x series
559 of PMIC devices.
560
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]561config REGULATOR_WM8350
562 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
563 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]564 help
565 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]566 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]567
568config REGULATOR_WM8400
569 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
570 depends on MFD_WM8400
571 help
572 This driver provides support for the voltage regulators of the
573 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]574
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]575config REGULATOR_WM8994
576 tristate "Wolfson Microelectronics WM8994 CODEC"
577 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]578 help
579 This driver provides support for the voltage regulators on the
580 WM8994 CODEC.
581
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]582endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]583