Michael Hennerich | 8088409 | 2010-01-08 14:43:08 -0800 | [diff] [blame] | 1 | /* |
| 2 | * GPIO Chip driver for Analog Devices |
| 3 | * ADP5588 I/O Expander and QWERTY Keypad Controller |
| 4 | * |
| 5 | * Copyright 2009 Analog Devices Inc. |
| 6 | * |
| 7 | * Licensed under the GPL-2 or later. |
| 8 | */ |
| 9 | |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/i2c.h> |
| 14 | #include <linux/gpio.h> |
| 15 | |
| 16 | #include <linux/i2c/adp5588.h> |
| 17 | |
| 18 | #define DRV_NAME "adp5588-gpio" |
| 19 | #define MAXGPIO 18 |
| 20 | #define ADP_BANK(offs) ((offs) >> 3) |
| 21 | #define ADP_BIT(offs) (1u << ((offs) & 0x7)) |
| 22 | |
| 23 | struct adp5588_gpio { |
| 24 | struct i2c_client *client; |
| 25 | struct gpio_chip gpio_chip; |
| 26 | struct mutex lock; /* protect cached dir, dat_out */ |
| 27 | unsigned gpio_start; |
| 28 | uint8_t dat_out[3]; |
| 29 | uint8_t dir[3]; |
| 30 | }; |
| 31 | |
| 32 | static int adp5588_gpio_read(struct i2c_client *client, u8 reg) |
| 33 | { |
| 34 | int ret = i2c_smbus_read_byte_data(client, reg); |
| 35 | |
| 36 | if (ret < 0) |
| 37 | dev_err(&client->dev, "Read Error\n"); |
| 38 | |
| 39 | return ret; |
| 40 | } |
| 41 | |
| 42 | static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val) |
| 43 | { |
| 44 | int ret = i2c_smbus_write_byte_data(client, reg, val); |
| 45 | |
| 46 | if (ret < 0) |
| 47 | dev_err(&client->dev, "Write Error\n"); |
| 48 | |
| 49 | return ret; |
| 50 | } |
| 51 | |
| 52 | static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) |
| 53 | { |
| 54 | struct adp5588_gpio *dev = |
| 55 | container_of(chip, struct adp5588_gpio, gpio_chip); |
| 56 | |
| 57 | return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off)) |
| 58 | & ADP_BIT(off)); |
| 59 | } |
| 60 | |
| 61 | static void adp5588_gpio_set_value(struct gpio_chip *chip, |
| 62 | unsigned off, int val) |
| 63 | { |
| 64 | unsigned bank, bit; |
| 65 | struct adp5588_gpio *dev = |
| 66 | container_of(chip, struct adp5588_gpio, gpio_chip); |
| 67 | |
| 68 | bank = ADP_BANK(off); |
| 69 | bit = ADP_BIT(off); |
| 70 | |
| 71 | mutex_lock(&dev->lock); |
| 72 | if (val) |
| 73 | dev->dat_out[bank] |= bit; |
| 74 | else |
| 75 | dev->dat_out[bank] &= ~bit; |
| 76 | |
| 77 | adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, |
| 78 | dev->dat_out[bank]); |
| 79 | mutex_unlock(&dev->lock); |
| 80 | } |
| 81 | |
| 82 | static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) |
| 83 | { |
| 84 | int ret; |
| 85 | unsigned bank; |
| 86 | struct adp5588_gpio *dev = |
| 87 | container_of(chip, struct adp5588_gpio, gpio_chip); |
| 88 | |
| 89 | bank = ADP_BANK(off); |
| 90 | |
| 91 | mutex_lock(&dev->lock); |
| 92 | dev->dir[bank] &= ~ADP_BIT(off); |
| 93 | ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]); |
| 94 | mutex_unlock(&dev->lock); |
| 95 | |
| 96 | return ret; |
| 97 | } |
| 98 | |
| 99 | static int adp5588_gpio_direction_output(struct gpio_chip *chip, |
| 100 | unsigned off, int val) |
| 101 | { |
| 102 | int ret; |
| 103 | unsigned bank, bit; |
| 104 | struct adp5588_gpio *dev = |
| 105 | container_of(chip, struct adp5588_gpio, gpio_chip); |
| 106 | |
| 107 | bank = ADP_BANK(off); |
| 108 | bit = ADP_BIT(off); |
| 109 | |
| 110 | mutex_lock(&dev->lock); |
| 111 | dev->dir[bank] |= bit; |
| 112 | |
| 113 | if (val) |
| 114 | dev->dat_out[bank] |= bit; |
| 115 | else |
| 116 | dev->dat_out[bank] &= ~bit; |
| 117 | |
| 118 | ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank, |
| 119 | dev->dat_out[bank]); |
| 120 | ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, |
| 121 | dev->dir[bank]); |
| 122 | mutex_unlock(&dev->lock); |
| 123 | |
| 124 | return ret; |
| 125 | } |
| 126 | |
| 127 | static int __devinit adp5588_gpio_probe(struct i2c_client *client, |
| 128 | const struct i2c_device_id *id) |
| 129 | { |
| 130 | struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; |
| 131 | struct adp5588_gpio *dev; |
| 132 | struct gpio_chip *gc; |
| 133 | int ret, i, revid; |
| 134 | |
| 135 | if (pdata == NULL) { |
| 136 | dev_err(&client->dev, "missing platform data\n"); |
| 137 | return -ENODEV; |
| 138 | } |
| 139 | |
| 140 | if (!i2c_check_functionality(client->adapter, |
| 141 | I2C_FUNC_SMBUS_BYTE_DATA)) { |
| 142 | dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); |
| 143 | return -EIO; |
| 144 | } |
| 145 | |
| 146 | dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| 147 | if (dev == NULL) { |
| 148 | dev_err(&client->dev, "failed to alloc memory\n"); |
| 149 | return -ENOMEM; |
| 150 | } |
| 151 | |
| 152 | dev->client = client; |
| 153 | |
| 154 | gc = &dev->gpio_chip; |
| 155 | gc->direction_input = adp5588_gpio_direction_input; |
| 156 | gc->direction_output = adp5588_gpio_direction_output; |
| 157 | gc->get = adp5588_gpio_get_value; |
| 158 | gc->set = adp5588_gpio_set_value; |
| 159 | gc->can_sleep = 1; |
| 160 | |
| 161 | gc->base = pdata->gpio_start; |
| 162 | gc->ngpio = MAXGPIO; |
| 163 | gc->label = client->name; |
| 164 | gc->owner = THIS_MODULE; |
| 165 | |
| 166 | mutex_init(&dev->lock); |
| 167 | |
| 168 | |
| 169 | ret = adp5588_gpio_read(dev->client, DEV_ID); |
| 170 | if (ret < 0) |
| 171 | goto err; |
| 172 | |
| 173 | revid = ret & ADP5588_DEVICE_ID_MASK; |
| 174 | |
| 175 | for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) { |
| 176 | dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i); |
| 177 | dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i); |
| 178 | ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0); |
| 179 | ret |= adp5588_gpio_write(client, GPIO_PULL1 + i, |
| 180 | (pdata->pullup_dis_mask >> (8 * i)) & 0xFF); |
| 181 | |
| 182 | if (ret) |
| 183 | goto err; |
| 184 | } |
| 185 | |
| 186 | ret = gpiochip_add(&dev->gpio_chip); |
| 187 | if (ret) |
| 188 | goto err; |
| 189 | |
| 190 | dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n", |
| 191 | gc->base, gc->base + gc->ngpio - 1, |
| 192 | client->name, revid); |
| 193 | |
| 194 | if (pdata->setup) { |
| 195 | ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context); |
| 196 | if (ret < 0) |
| 197 | dev_warn(&client->dev, "setup failed, %d\n", ret); |
| 198 | } |
| 199 | |
| 200 | i2c_set_clientdata(client, dev); |
| 201 | return 0; |
| 202 | |
| 203 | err: |
| 204 | kfree(dev); |
| 205 | return ret; |
| 206 | } |
| 207 | |
| 208 | static int __devexit adp5588_gpio_remove(struct i2c_client *client) |
| 209 | { |
| 210 | struct adp5588_gpio_platform_data *pdata = client->dev.platform_data; |
| 211 | struct adp5588_gpio *dev = i2c_get_clientdata(client); |
| 212 | int ret; |
| 213 | |
| 214 | if (pdata->teardown) { |
| 215 | ret = pdata->teardown(client, |
| 216 | dev->gpio_chip.base, dev->gpio_chip.ngpio, |
| 217 | pdata->context); |
| 218 | if (ret < 0) { |
| 219 | dev_err(&client->dev, "teardown failed %d\n", ret); |
| 220 | return ret; |
| 221 | } |
| 222 | } |
| 223 | |
| 224 | ret = gpiochip_remove(&dev->gpio_chip); |
| 225 | if (ret) { |
| 226 | dev_err(&client->dev, "gpiochip_remove failed %d\n", ret); |
| 227 | return ret; |
| 228 | } |
| 229 | |
| 230 | kfree(dev); |
| 231 | return 0; |
| 232 | } |
| 233 | |
| 234 | static const struct i2c_device_id adp5588_gpio_id[] = { |
| 235 | {DRV_NAME, 0}, |
| 236 | {} |
| 237 | }; |
| 238 | |
| 239 | MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id); |
| 240 | |
| 241 | static struct i2c_driver adp5588_gpio_driver = { |
| 242 | .driver = { |
| 243 | .name = DRV_NAME, |
| 244 | }, |
| 245 | .probe = adp5588_gpio_probe, |
| 246 | .remove = __devexit_p(adp5588_gpio_remove), |
| 247 | .id_table = adp5588_gpio_id, |
| 248 | }; |
| 249 | |
| 250 | static int __init adp5588_gpio_init(void) |
| 251 | { |
| 252 | return i2c_add_driver(&adp5588_gpio_driver); |
| 253 | } |
| 254 | |
| 255 | module_init(adp5588_gpio_init); |
| 256 | |
| 257 | static void __exit adp5588_gpio_exit(void) |
| 258 | { |
| 259 | i2c_del_driver(&adp5588_gpio_driver); |
| 260 | } |
| 261 | |
| 262 | module_exit(adp5588_gpio_exit); |
| 263 | |
| 264 | MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| 265 | MODULE_DESCRIPTION("GPIO ADP5588 Driver"); |
| 266 | MODULE_LICENSE("GPL"); |