Benjamin Gaignard | 9c41e45 | 2017-11-30 09:43:57 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2 | /* |
| 3 | * Driver for STMicroelectronics STM32F7 I2C controller |
| 4 | * |
| 5 | * This I2C controller is described in the STM32F75xxx and STM32F74xxx Soc |
| 6 | * reference manual. |
| 7 | * Please see below a link to the documentation: |
| 8 | * http://www.st.com/resource/en/reference_manual/dm00124865.pdf |
| 9 | * |
| 10 | * Copyright (C) M'boumba Cedric Madianga 2017 |
Benjamin Gaignard | 9c41e45 | 2017-11-30 09:43:57 +0100 | [diff] [blame] | 11 | * Copyright (C) STMicroelectronics 2017 |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 12 | * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com> |
| 13 | * |
| 14 | * This driver is based on i2c-stm32f4.c |
| 15 | * |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 16 | */ |
| 17 | #include <linux/clk.h> |
| 18 | #include <linux/delay.h> |
| 19 | #include <linux/err.h> |
| 20 | #include <linux/i2c.h> |
| 21 | #include <linux/interrupt.h> |
| 22 | #include <linux/io.h> |
| 23 | #include <linux/iopoll.h> |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 24 | #include <linux/mfd/syscon.h> |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 25 | #include <linux/module.h> |
| 26 | #include <linux/of.h> |
| 27 | #include <linux/of_address.h> |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 28 | #include <linux/of_platform.h> |
| 29 | #include <linux/platform_device.h> |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 30 | #include <linux/pinctrl/consumer.h> |
| 31 | #include <linux/pm_runtime.h> |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 32 | #include <linux/regmap.h> |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 33 | #include <linux/reset.h> |
| 34 | #include <linux/slab.h> |
| 35 | |
| 36 | #include "i2c-stm32.h" |
| 37 | |
| 38 | /* STM32F7 I2C registers */ |
| 39 | #define STM32F7_I2C_CR1 0x00 |
| 40 | #define STM32F7_I2C_CR2 0x04 |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 41 | #define STM32F7_I2C_OAR1 0x08 |
| 42 | #define STM32F7_I2C_OAR2 0x0C |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 43 | #define STM32F7_I2C_PECR 0x20 |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 44 | #define STM32F7_I2C_TIMINGR 0x10 |
| 45 | #define STM32F7_I2C_ISR 0x18 |
| 46 | #define STM32F7_I2C_ICR 0x1C |
| 47 | #define STM32F7_I2C_RXDR 0x24 |
| 48 | #define STM32F7_I2C_TXDR 0x28 |
| 49 | |
| 50 | /* STM32F7 I2C control 1 */ |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 51 | #define STM32F7_I2C_CR1_PECEN BIT(23) |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 52 | #define STM32F7_I2C_CR1_SBC BIT(16) |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 53 | #define STM32F7_I2C_CR1_RXDMAEN BIT(15) |
| 54 | #define STM32F7_I2C_CR1_TXDMAEN BIT(14) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 55 | #define STM32F7_I2C_CR1_ANFOFF BIT(12) |
| 56 | #define STM32F7_I2C_CR1_ERRIE BIT(7) |
| 57 | #define STM32F7_I2C_CR1_TCIE BIT(6) |
| 58 | #define STM32F7_I2C_CR1_STOPIE BIT(5) |
| 59 | #define STM32F7_I2C_CR1_NACKIE BIT(4) |
| 60 | #define STM32F7_I2C_CR1_ADDRIE BIT(3) |
| 61 | #define STM32F7_I2C_CR1_RXIE BIT(2) |
| 62 | #define STM32F7_I2C_CR1_TXIE BIT(1) |
| 63 | #define STM32F7_I2C_CR1_PE BIT(0) |
| 64 | #define STM32F7_I2C_ALL_IRQ_MASK (STM32F7_I2C_CR1_ERRIE \ |
| 65 | | STM32F7_I2C_CR1_TCIE \ |
| 66 | | STM32F7_I2C_CR1_STOPIE \ |
| 67 | | STM32F7_I2C_CR1_NACKIE \ |
| 68 | | STM32F7_I2C_CR1_RXIE \ |
| 69 | | STM32F7_I2C_CR1_TXIE) |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 70 | #define STM32F7_I2C_XFER_IRQ_MASK (STM32F7_I2C_CR1_TCIE \ |
| 71 | | STM32F7_I2C_CR1_STOPIE \ |
| 72 | | STM32F7_I2C_CR1_NACKIE \ |
| 73 | | STM32F7_I2C_CR1_RXIE \ |
| 74 | | STM32F7_I2C_CR1_TXIE) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 75 | |
| 76 | /* STM32F7 I2C control 2 */ |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 77 | #define STM32F7_I2C_CR2_PECBYTE BIT(26) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 78 | #define STM32F7_I2C_CR2_RELOAD BIT(24) |
| 79 | #define STM32F7_I2C_CR2_NBYTES_MASK GENMASK(23, 16) |
| 80 | #define STM32F7_I2C_CR2_NBYTES(n) (((n) & 0xff) << 16) |
| 81 | #define STM32F7_I2C_CR2_NACK BIT(15) |
| 82 | #define STM32F7_I2C_CR2_STOP BIT(14) |
| 83 | #define STM32F7_I2C_CR2_START BIT(13) |
Pierre-Yves MORDRET | 8c7ecc9 | 2018-04-11 15:24:53 +0200 | [diff] [blame] | 84 | #define STM32F7_I2C_CR2_HEAD10R BIT(12) |
| 85 | #define STM32F7_I2C_CR2_ADD10 BIT(11) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 86 | #define STM32F7_I2C_CR2_RD_WRN BIT(10) |
Pierre-Yves MORDRET | 8c7ecc9 | 2018-04-11 15:24:53 +0200 | [diff] [blame] | 87 | #define STM32F7_I2C_CR2_SADD10_MASK GENMASK(9, 0) |
| 88 | #define STM32F7_I2C_CR2_SADD10(n) (((n) & \ |
| 89 | STM32F7_I2C_CR2_SADD10_MASK)) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 90 | #define STM32F7_I2C_CR2_SADD7_MASK GENMASK(7, 1) |
| 91 | #define STM32F7_I2C_CR2_SADD7(n) (((n) & 0x7f) << 1) |
| 92 | |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 93 | /* STM32F7 I2C Own Address 1 */ |
| 94 | #define STM32F7_I2C_OAR1_OA1EN BIT(15) |
| 95 | #define STM32F7_I2C_OAR1_OA1MODE BIT(10) |
| 96 | #define STM32F7_I2C_OAR1_OA1_10_MASK GENMASK(9, 0) |
| 97 | #define STM32F7_I2C_OAR1_OA1_10(n) (((n) & \ |
| 98 | STM32F7_I2C_OAR1_OA1_10_MASK)) |
| 99 | #define STM32F7_I2C_OAR1_OA1_7_MASK GENMASK(7, 1) |
| 100 | #define STM32F7_I2C_OAR1_OA1_7(n) (((n) & 0x7f) << 1) |
| 101 | #define STM32F7_I2C_OAR1_MASK (STM32F7_I2C_OAR1_OA1_7_MASK \ |
| 102 | | STM32F7_I2C_OAR1_OA1_10_MASK \ |
| 103 | | STM32F7_I2C_OAR1_OA1EN \ |
| 104 | | STM32F7_I2C_OAR1_OA1MODE) |
| 105 | |
| 106 | /* STM32F7 I2C Own Address 2 */ |
| 107 | #define STM32F7_I2C_OAR2_OA2EN BIT(15) |
| 108 | #define STM32F7_I2C_OAR2_OA2MSK_MASK GENMASK(10, 8) |
| 109 | #define STM32F7_I2C_OAR2_OA2MSK(n) (((n) & 0x7) << 8) |
| 110 | #define STM32F7_I2C_OAR2_OA2_7_MASK GENMASK(7, 1) |
| 111 | #define STM32F7_I2C_OAR2_OA2_7(n) (((n) & 0x7f) << 1) |
| 112 | #define STM32F7_I2C_OAR2_MASK (STM32F7_I2C_OAR2_OA2MSK_MASK \ |
| 113 | | STM32F7_I2C_OAR2_OA2_7_MASK \ |
| 114 | | STM32F7_I2C_OAR2_OA2EN) |
| 115 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 116 | /* STM32F7 I2C Interrupt Status */ |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 117 | #define STM32F7_I2C_ISR_ADDCODE_MASK GENMASK(23, 17) |
| 118 | #define STM32F7_I2C_ISR_ADDCODE_GET(n) \ |
| 119 | (((n) & STM32F7_I2C_ISR_ADDCODE_MASK) >> 17) |
| 120 | #define STM32F7_I2C_ISR_DIR BIT(16) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 121 | #define STM32F7_I2C_ISR_BUSY BIT(15) |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 122 | #define STM32F7_I2C_ISR_PECERR BIT(11) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 123 | #define STM32F7_I2C_ISR_ARLO BIT(9) |
| 124 | #define STM32F7_I2C_ISR_BERR BIT(8) |
| 125 | #define STM32F7_I2C_ISR_TCR BIT(7) |
| 126 | #define STM32F7_I2C_ISR_TC BIT(6) |
| 127 | #define STM32F7_I2C_ISR_STOPF BIT(5) |
| 128 | #define STM32F7_I2C_ISR_NACKF BIT(4) |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 129 | #define STM32F7_I2C_ISR_ADDR BIT(3) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 130 | #define STM32F7_I2C_ISR_RXNE BIT(2) |
| 131 | #define STM32F7_I2C_ISR_TXIS BIT(1) |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 132 | #define STM32F7_I2C_ISR_TXE BIT(0) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 133 | |
| 134 | /* STM32F7 I2C Interrupt Clear */ |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 135 | #define STM32F7_I2C_ICR_PECCF BIT(11) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 136 | #define STM32F7_I2C_ICR_ARLOCF BIT(9) |
| 137 | #define STM32F7_I2C_ICR_BERRCF BIT(8) |
| 138 | #define STM32F7_I2C_ICR_STOPCF BIT(5) |
| 139 | #define STM32F7_I2C_ICR_NACKCF BIT(4) |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 140 | #define STM32F7_I2C_ICR_ADDRCF BIT(3) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 141 | |
| 142 | /* STM32F7 I2C Timing */ |
| 143 | #define STM32F7_I2C_TIMINGR_PRESC(n) (((n) & 0xf) << 28) |
| 144 | #define STM32F7_I2C_TIMINGR_SCLDEL(n) (((n) & 0xf) << 20) |
| 145 | #define STM32F7_I2C_TIMINGR_SDADEL(n) (((n) & 0xf) << 16) |
| 146 | #define STM32F7_I2C_TIMINGR_SCLH(n) (((n) & 0xff) << 8) |
| 147 | #define STM32F7_I2C_TIMINGR_SCLL(n) ((n) & 0xff) |
| 148 | |
| 149 | #define STM32F7_I2C_MAX_LEN 0xff |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 150 | #define STM32F7_I2C_DMA_LEN_MIN 0x16 |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 151 | #define STM32F7_I2C_MAX_SLAVE 0x2 |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 152 | |
| 153 | #define STM32F7_I2C_DNF_DEFAULT 0 |
| 154 | #define STM32F7_I2C_DNF_MAX 16 |
| 155 | |
| 156 | #define STM32F7_I2C_ANALOG_FILTER_ENABLE 1 |
| 157 | #define STM32F7_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */ |
| 158 | #define STM32F7_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */ |
| 159 | |
| 160 | #define STM32F7_I2C_RISE_TIME_DEFAULT 25 /* ns */ |
| 161 | #define STM32F7_I2C_FALL_TIME_DEFAULT 10 /* ns */ |
| 162 | |
| 163 | #define STM32F7_PRESC_MAX BIT(4) |
| 164 | #define STM32F7_SCLDEL_MAX BIT(4) |
| 165 | #define STM32F7_SDADEL_MAX BIT(4) |
| 166 | #define STM32F7_SCLH_MAX BIT(8) |
| 167 | #define STM32F7_SCLL_MAX BIT(8) |
| 168 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 169 | #define STM32F7_AUTOSUSPEND_DELAY (HZ / 100) |
| 170 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 171 | /** |
| 172 | * struct stm32f7_i2c_spec - private i2c specification timing |
| 173 | * @rate: I2C bus speed (Hz) |
| 174 | * @rate_min: 80% of I2C bus speed (Hz) |
| 175 | * @rate_max: 100% of I2C bus speed (Hz) |
| 176 | * @fall_max: Max fall time of both SDA and SCL signals (ns) |
| 177 | * @rise_max: Max rise time of both SDA and SCL signals (ns) |
| 178 | * @hddat_min: Min data hold time (ns) |
| 179 | * @vddat_max: Max data valid time (ns) |
| 180 | * @sudat_min: Min data setup time (ns) |
| 181 | * @l_min: Min low period of the SCL clock (ns) |
| 182 | * @h_min: Min high period of the SCL clock (ns) |
| 183 | */ |
| 184 | struct stm32f7_i2c_spec { |
| 185 | u32 rate; |
| 186 | u32 rate_min; |
| 187 | u32 rate_max; |
| 188 | u32 fall_max; |
| 189 | u32 rise_max; |
| 190 | u32 hddat_min; |
| 191 | u32 vddat_max; |
| 192 | u32 sudat_min; |
| 193 | u32 l_min; |
| 194 | u32 h_min; |
| 195 | }; |
| 196 | |
| 197 | /** |
| 198 | * struct stm32f7_i2c_setup - private I2C timing setup parameters |
| 199 | * @speed: I2C speed mode (standard, Fast Plus) |
| 200 | * @speed_freq: I2C speed frequency (Hz) |
| 201 | * @clock_src: I2C clock source frequency (Hz) |
| 202 | * @rise_time: Rise time (ns) |
| 203 | * @fall_time: Fall time (ns) |
| 204 | * @dnf: Digital filter coefficient (0-16) |
| 205 | * @analog_filter: Analog filter delay (On/Off) |
| 206 | */ |
| 207 | struct stm32f7_i2c_setup { |
| 208 | enum stm32_i2c_speed speed; |
| 209 | u32 speed_freq; |
| 210 | u32 clock_src; |
| 211 | u32 rise_time; |
| 212 | u32 fall_time; |
| 213 | u8 dnf; |
| 214 | bool analog_filter; |
| 215 | }; |
| 216 | |
| 217 | /** |
| 218 | * struct stm32f7_i2c_timings - private I2C output parameters |
Pierre-Yves MORDRET | c599eb4 | 2018-05-11 10:20:25 +0200 | [diff] [blame] | 219 | * @node: List entry |
| 220 | * @presc: Prescaler value |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 221 | * @scldel: Data setup time |
| 222 | * @sdadel: Data hold time |
| 223 | * @sclh: SCL high period (master mode) |
Pierre-Yves MORDRET | c599eb4 | 2018-05-11 10:20:25 +0200 | [diff] [blame] | 224 | * @scll: SCL low period (master mode) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 225 | */ |
| 226 | struct stm32f7_i2c_timings { |
| 227 | struct list_head node; |
| 228 | u8 presc; |
| 229 | u8 scldel; |
| 230 | u8 sdadel; |
| 231 | u8 sclh; |
| 232 | u8 scll; |
| 233 | }; |
| 234 | |
| 235 | /** |
| 236 | * struct stm32f7_i2c_msg - client specific data |
Pierre-Yves MORDRET | 8c7ecc9 | 2018-04-11 15:24:53 +0200 | [diff] [blame] | 237 | * @addr: 8-bit or 10-bit slave addr, including r/w bit |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 238 | * @count: number of bytes to be transferred |
| 239 | * @buf: data buffer |
| 240 | * @result: result of the transfer |
| 241 | * @stop: last I2C msg to be sent, i.e. STOP to be generated |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 242 | * @smbus: boolean to know if the I2C IP is used in SMBus mode |
| 243 | * @size: type of SMBus protocol |
| 244 | * @read_write: direction of SMBus protocol |
| 245 | * SMBus block read and SMBus block write - block read process call protocols |
Pierre-Yves MORDRET | c599eb4 | 2018-05-11 10:20:25 +0200 | [diff] [blame] | 246 | * @smbus_buf: buffer to be used for SMBus protocol transfer. It will |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 247 | * contain a maximum of 32 bytes of data + byte command + byte count + PEC |
| 248 | * This buffer has to be 32-bit aligned to be compliant with memory address |
| 249 | * register in DMA mode. |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 250 | */ |
| 251 | struct stm32f7_i2c_msg { |
Pierre-Yves MORDRET | 8c7ecc9 | 2018-04-11 15:24:53 +0200 | [diff] [blame] | 252 | u16 addr; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 253 | u32 count; |
| 254 | u8 *buf; |
| 255 | int result; |
| 256 | bool stop; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 257 | bool smbus; |
| 258 | int size; |
| 259 | char read_write; |
| 260 | u8 smbus_buf[I2C_SMBUS_BLOCK_MAX + 3] __aligned(4); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 261 | }; |
| 262 | |
| 263 | /** |
| 264 | * struct stm32f7_i2c_dev - private data of the controller |
| 265 | * @adap: I2C adapter for this controller |
| 266 | * @dev: device for this controller |
| 267 | * @base: virtual memory area |
| 268 | * @complete: completion of I2C message |
| 269 | * @clk: hw i2c clock |
| 270 | * @speed: I2C clock frequency of the controller. Standard, Fast or Fast+ |
| 271 | * @msg: Pointer to data to be written |
| 272 | * @msg_num: number of I2C messages to be executed |
| 273 | * @msg_id: message identifiant |
| 274 | * @f7_msg: customized i2c msg for driver usage |
| 275 | * @setup: I2C timing input setup |
| 276 | * @timing: I2C computed timings |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 277 | * @slave: list of slave devices registered on the I2C bus |
| 278 | * @slave_running: slave device currently used |
| 279 | * @slave_dir: transfer direction for the current slave device |
| 280 | * @master_mode: boolean to know in which mode the I2C is running (master or |
| 281 | * slave) |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 282 | * @dma: dma data |
| 283 | * @use_dma: boolean to know if dma is used in the current transfer |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 284 | * @regmap: holds SYSCFG phandle for Fast Mode Plus bits |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 285 | */ |
| 286 | struct stm32f7_i2c_dev { |
| 287 | struct i2c_adapter adap; |
| 288 | struct device *dev; |
| 289 | void __iomem *base; |
| 290 | struct completion complete; |
| 291 | struct clk *clk; |
| 292 | int speed; |
| 293 | struct i2c_msg *msg; |
| 294 | unsigned int msg_num; |
| 295 | unsigned int msg_id; |
| 296 | struct stm32f7_i2c_msg f7_msg; |
Pierre-Yves MORDRET | 463a921 | 2017-09-21 15:30:09 +0200 | [diff] [blame] | 297 | struct stm32f7_i2c_setup setup; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 298 | struct stm32f7_i2c_timings timing; |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 299 | struct i2c_client *slave[STM32F7_I2C_MAX_SLAVE]; |
| 300 | struct i2c_client *slave_running; |
| 301 | u32 slave_dir; |
| 302 | bool master_mode; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 303 | struct stm32_i2c_dma *dma; |
| 304 | bool use_dma; |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 305 | struct regmap *regmap; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 306 | }; |
| 307 | |
Alain Volmat | 348e46f | 2019-10-15 15:11:58 +0200 | [diff] [blame] | 308 | /* |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 309 | * All these values are coming from I2C Specification, Version 6.0, 4th of |
| 310 | * April 2014. |
| 311 | * |
| 312 | * Table10. Characteristics of the SDA and SCL bus lines for Standard, Fast, |
| 313 | * and Fast-mode Plus I2C-bus devices |
| 314 | */ |
| 315 | static struct stm32f7_i2c_spec i2c_specs[] = { |
| 316 | [STM32_I2C_SPEED_STANDARD] = { |
| 317 | .rate = 100000, |
| 318 | .rate_min = 80000, |
| 319 | .rate_max = 100000, |
| 320 | .fall_max = 300, |
| 321 | .rise_max = 1000, |
| 322 | .hddat_min = 0, |
| 323 | .vddat_max = 3450, |
| 324 | .sudat_min = 250, |
| 325 | .l_min = 4700, |
| 326 | .h_min = 4000, |
| 327 | }, |
| 328 | [STM32_I2C_SPEED_FAST] = { |
| 329 | .rate = 400000, |
| 330 | .rate_min = 320000, |
| 331 | .rate_max = 400000, |
| 332 | .fall_max = 300, |
| 333 | .rise_max = 300, |
| 334 | .hddat_min = 0, |
| 335 | .vddat_max = 900, |
| 336 | .sudat_min = 100, |
| 337 | .l_min = 1300, |
| 338 | .h_min = 600, |
| 339 | }, |
| 340 | [STM32_I2C_SPEED_FAST_PLUS] = { |
| 341 | .rate = 1000000, |
| 342 | .rate_min = 800000, |
| 343 | .rate_max = 1000000, |
| 344 | .fall_max = 100, |
| 345 | .rise_max = 120, |
| 346 | .hddat_min = 0, |
| 347 | .vddat_max = 450, |
| 348 | .sudat_min = 50, |
| 349 | .l_min = 500, |
| 350 | .h_min = 260, |
| 351 | }, |
| 352 | }; |
| 353 | |
Colin Ian King | 25f2f44 | 2017-09-18 09:15:39 +0100 | [diff] [blame] | 354 | static const struct stm32f7_i2c_setup stm32f7_setup = { |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 355 | .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT, |
| 356 | .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT, |
| 357 | .dnf = STM32F7_I2C_DNF_DEFAULT, |
| 358 | .analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE, |
| 359 | }; |
| 360 | |
| 361 | static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask) |
| 362 | { |
| 363 | writel_relaxed(readl_relaxed(reg) | mask, reg); |
| 364 | } |
| 365 | |
| 366 | static inline void stm32f7_i2c_clr_bits(void __iomem *reg, u32 mask) |
| 367 | { |
| 368 | writel_relaxed(readl_relaxed(reg) & ~mask, reg); |
| 369 | } |
| 370 | |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 371 | static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask) |
| 372 | { |
| 373 | stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask); |
| 374 | } |
| 375 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 376 | static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev, |
| 377 | struct stm32f7_i2c_setup *setup, |
| 378 | struct stm32f7_i2c_timings *output) |
| 379 | { |
| 380 | u32 p_prev = STM32F7_PRESC_MAX; |
| 381 | u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC, |
| 382 | setup->clock_src); |
| 383 | u32 i2cbus = DIV_ROUND_CLOSEST(NSEC_PER_SEC, |
| 384 | setup->speed_freq); |
| 385 | u32 clk_error_prev = i2cbus; |
| 386 | u32 tsync; |
| 387 | u32 af_delay_min, af_delay_max; |
| 388 | u32 dnf_delay; |
| 389 | u32 clk_min, clk_max; |
| 390 | int sdadel_min, sdadel_max; |
| 391 | int scldel_min; |
| 392 | struct stm32f7_i2c_timings *v, *_v, *s; |
| 393 | struct list_head solutions; |
| 394 | u16 p, l, a, h; |
| 395 | int ret = 0; |
| 396 | |
| 397 | if (setup->speed >= STM32_I2C_SPEED_END) { |
| 398 | dev_err(i2c_dev->dev, "speed out of bound {%d/%d}\n", |
| 399 | setup->speed, STM32_I2C_SPEED_END - 1); |
| 400 | return -EINVAL; |
| 401 | } |
| 402 | |
| 403 | if ((setup->rise_time > i2c_specs[setup->speed].rise_max) || |
| 404 | (setup->fall_time > i2c_specs[setup->speed].fall_max)) { |
| 405 | dev_err(i2c_dev->dev, |
| 406 | "timings out of bound Rise{%d>%d}/Fall{%d>%d}\n", |
| 407 | setup->rise_time, i2c_specs[setup->speed].rise_max, |
| 408 | setup->fall_time, i2c_specs[setup->speed].fall_max); |
| 409 | return -EINVAL; |
| 410 | } |
| 411 | |
| 412 | if (setup->dnf > STM32F7_I2C_DNF_MAX) { |
| 413 | dev_err(i2c_dev->dev, |
| 414 | "DNF out of bound %d/%d\n", |
| 415 | setup->dnf, STM32F7_I2C_DNF_MAX); |
| 416 | return -EINVAL; |
| 417 | } |
| 418 | |
| 419 | if (setup->speed_freq > i2c_specs[setup->speed].rate) { |
| 420 | dev_err(i2c_dev->dev, "ERROR: Freq {%d/%d}\n", |
| 421 | setup->speed_freq, i2c_specs[setup->speed].rate); |
| 422 | return -EINVAL; |
| 423 | } |
| 424 | |
| 425 | /* Analog and Digital Filters */ |
| 426 | af_delay_min = |
| 427 | (setup->analog_filter ? |
| 428 | STM32F7_I2C_ANALOG_FILTER_DELAY_MIN : 0); |
| 429 | af_delay_max = |
| 430 | (setup->analog_filter ? |
| 431 | STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0); |
| 432 | dnf_delay = setup->dnf * i2cclk; |
| 433 | |
Nicolas Le Bayon | c86da50 | 2019-03-06 15:12:16 +0000 | [diff] [blame] | 434 | sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time - |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 435 | af_delay_min - (setup->dnf + 3) * i2cclk; |
| 436 | |
| 437 | sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time - |
| 438 | af_delay_max - (setup->dnf + 4) * i2cclk; |
| 439 | |
| 440 | scldel_min = setup->rise_time + i2c_specs[setup->speed].sudat_min; |
| 441 | |
| 442 | if (sdadel_min < 0) |
| 443 | sdadel_min = 0; |
| 444 | if (sdadel_max < 0) |
| 445 | sdadel_max = 0; |
| 446 | |
| 447 | dev_dbg(i2c_dev->dev, "SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n", |
| 448 | sdadel_min, sdadel_max, scldel_min); |
| 449 | |
| 450 | INIT_LIST_HEAD(&solutions); |
| 451 | /* Compute possible values for PRESC, SCLDEL and SDADEL */ |
| 452 | for (p = 0; p < STM32F7_PRESC_MAX; p++) { |
| 453 | for (l = 0; l < STM32F7_SCLDEL_MAX; l++) { |
| 454 | u32 scldel = (l + 1) * (p + 1) * i2cclk; |
| 455 | |
| 456 | if (scldel < scldel_min) |
| 457 | continue; |
| 458 | |
| 459 | for (a = 0; a < STM32F7_SDADEL_MAX; a++) { |
| 460 | u32 sdadel = (a * (p + 1) + 1) * i2cclk; |
| 461 | |
| 462 | if (((sdadel >= sdadel_min) && |
| 463 | (sdadel <= sdadel_max)) && |
| 464 | (p != p_prev)) { |
| 465 | v = kmalloc(sizeof(*v), GFP_KERNEL); |
| 466 | if (!v) { |
| 467 | ret = -ENOMEM; |
| 468 | goto exit; |
| 469 | } |
| 470 | |
| 471 | v->presc = p; |
| 472 | v->scldel = l; |
| 473 | v->sdadel = a; |
| 474 | p_prev = p; |
| 475 | |
| 476 | list_add_tail(&v->node, |
| 477 | &solutions); |
Nicolas Le Bayon | 0d73503 | 2019-03-06 15:12:32 +0000 | [diff] [blame] | 478 | break; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 479 | } |
| 480 | } |
Nicolas Le Bayon | 0d73503 | 2019-03-06 15:12:32 +0000 | [diff] [blame] | 481 | |
| 482 | if (p_prev == p) |
| 483 | break; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 484 | } |
| 485 | } |
| 486 | |
| 487 | if (list_empty(&solutions)) { |
| 488 | dev_err(i2c_dev->dev, "no Prescaler solution\n"); |
| 489 | ret = -EPERM; |
| 490 | goto exit; |
| 491 | } |
| 492 | |
| 493 | tsync = af_delay_min + dnf_delay + (2 * i2cclk); |
| 494 | s = NULL; |
| 495 | clk_max = NSEC_PER_SEC / i2c_specs[setup->speed].rate_min; |
| 496 | clk_min = NSEC_PER_SEC / i2c_specs[setup->speed].rate_max; |
| 497 | |
| 498 | /* |
| 499 | * Among Prescaler possibilities discovered above figures out SCL Low |
| 500 | * and High Period. Provided: |
| 501 | * - SCL Low Period has to be higher than SCL Clock Low Period |
| 502 | * defined by I2C Specification. I2C Clock has to be lower than |
| 503 | * (SCL Low Period - Analog/Digital filters) / 4. |
| 504 | * - SCL High Period has to be lower than SCL Clock High Period |
| 505 | * defined by I2C Specification |
| 506 | * - I2C Clock has to be lower than SCL High Period |
| 507 | */ |
| 508 | list_for_each_entry(v, &solutions, node) { |
| 509 | u32 prescaler = (v->presc + 1) * i2cclk; |
| 510 | |
| 511 | for (l = 0; l < STM32F7_SCLL_MAX; l++) { |
| 512 | u32 tscl_l = (l + 1) * prescaler + tsync; |
| 513 | |
| 514 | if ((tscl_l < i2c_specs[setup->speed].l_min) || |
| 515 | (i2cclk >= |
| 516 | ((tscl_l - af_delay_min - dnf_delay) / 4))) { |
| 517 | continue; |
| 518 | } |
| 519 | |
| 520 | for (h = 0; h < STM32F7_SCLH_MAX; h++) { |
| 521 | u32 tscl_h = (h + 1) * prescaler + tsync; |
| 522 | u32 tscl = tscl_l + tscl_h + |
| 523 | setup->rise_time + setup->fall_time; |
| 524 | |
| 525 | if ((tscl >= clk_min) && (tscl <= clk_max) && |
| 526 | (tscl_h >= i2c_specs[setup->speed].h_min) && |
| 527 | (i2cclk < tscl_h)) { |
| 528 | int clk_error = tscl - i2cbus; |
| 529 | |
| 530 | if (clk_error < 0) |
| 531 | clk_error = -clk_error; |
| 532 | |
| 533 | if (clk_error < clk_error_prev) { |
| 534 | clk_error_prev = clk_error; |
| 535 | v->scll = l; |
| 536 | v->sclh = h; |
| 537 | s = v; |
| 538 | } |
| 539 | } |
| 540 | } |
| 541 | } |
| 542 | } |
| 543 | |
| 544 | if (!s) { |
| 545 | dev_err(i2c_dev->dev, "no solution at all\n"); |
| 546 | ret = -EPERM; |
| 547 | goto exit; |
| 548 | } |
| 549 | |
| 550 | output->presc = s->presc; |
| 551 | output->scldel = s->scldel; |
| 552 | output->sdadel = s->sdadel; |
| 553 | output->scll = s->scll; |
| 554 | output->sclh = s->sclh; |
| 555 | |
| 556 | dev_dbg(i2c_dev->dev, |
| 557 | "Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n", |
| 558 | output->presc, |
| 559 | output->scldel, output->sdadel, |
| 560 | output->scll, output->sclh); |
| 561 | |
| 562 | exit: |
| 563 | /* Release list and memory */ |
| 564 | list_for_each_entry_safe(v, _v, &solutions, node) { |
| 565 | list_del(&v->node); |
| 566 | kfree(v); |
| 567 | } |
| 568 | |
| 569 | return ret; |
| 570 | } |
| 571 | |
| 572 | static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev, |
| 573 | struct stm32f7_i2c_setup *setup) |
| 574 | { |
| 575 | int ret = 0; |
| 576 | |
| 577 | setup->speed = i2c_dev->speed; |
| 578 | setup->speed_freq = i2c_specs[setup->speed].rate; |
| 579 | setup->clock_src = clk_get_rate(i2c_dev->clk); |
| 580 | |
| 581 | if (!setup->clock_src) { |
| 582 | dev_err(i2c_dev->dev, "clock rate is 0\n"); |
| 583 | return -EINVAL; |
| 584 | } |
| 585 | |
| 586 | do { |
| 587 | ret = stm32f7_i2c_compute_timing(i2c_dev, setup, |
| 588 | &i2c_dev->timing); |
| 589 | if (ret) { |
| 590 | dev_err(i2c_dev->dev, |
| 591 | "failed to compute I2C timings.\n"); |
| 592 | if (i2c_dev->speed > STM32_I2C_SPEED_STANDARD) { |
| 593 | i2c_dev->speed--; |
| 594 | setup->speed = i2c_dev->speed; |
| 595 | setup->speed_freq = |
| 596 | i2c_specs[setup->speed].rate; |
| 597 | dev_warn(i2c_dev->dev, |
| 598 | "downgrade I2C Speed Freq to (%i)\n", |
| 599 | i2c_specs[setup->speed].rate); |
| 600 | } else { |
| 601 | break; |
| 602 | } |
| 603 | } |
| 604 | } while (ret); |
| 605 | |
| 606 | if (ret) { |
| 607 | dev_err(i2c_dev->dev, "Impossible to compute I2C timings.\n"); |
| 608 | return ret; |
| 609 | } |
| 610 | |
| 611 | dev_dbg(i2c_dev->dev, "I2C Speed(%i), Freq(%i), Clk Source(%i)\n", |
| 612 | setup->speed, setup->speed_freq, setup->clock_src); |
| 613 | dev_dbg(i2c_dev->dev, "I2C Rise(%i) and Fall(%i) Time\n", |
| 614 | setup->rise_time, setup->fall_time); |
| 615 | dev_dbg(i2c_dev->dev, "I2C Analog Filter(%s), DNF(%i)\n", |
| 616 | (setup->analog_filter ? "On" : "Off"), setup->dnf); |
| 617 | |
| 618 | return 0; |
| 619 | } |
| 620 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 621 | static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev) |
| 622 | { |
| 623 | void __iomem *base = i2c_dev->base; |
| 624 | u32 mask = STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN; |
| 625 | |
| 626 | stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask); |
| 627 | } |
| 628 | |
| 629 | static void stm32f7_i2c_dma_callback(void *arg) |
| 630 | { |
| 631 | struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg; |
| 632 | struct stm32_i2c_dma *dma = i2c_dev->dma; |
| 633 | struct device *dev = dma->chan_using->device->dev; |
| 634 | |
| 635 | stm32f7_i2c_disable_dma_req(i2c_dev); |
| 636 | dma_unmap_single(dev, dma->dma_buf, dma->dma_len, dma->dma_data_dir); |
| 637 | complete(&dma->dma_complete); |
| 638 | } |
| 639 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 640 | static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev) |
| 641 | { |
| 642 | struct stm32f7_i2c_timings *t = &i2c_dev->timing; |
| 643 | u32 timing = 0; |
| 644 | |
| 645 | /* Timing settings */ |
| 646 | timing |= STM32F7_I2C_TIMINGR_PRESC(t->presc); |
| 647 | timing |= STM32F7_I2C_TIMINGR_SCLDEL(t->scldel); |
| 648 | timing |= STM32F7_I2C_TIMINGR_SDADEL(t->sdadel); |
| 649 | timing |= STM32F7_I2C_TIMINGR_SCLH(t->sclh); |
| 650 | timing |= STM32F7_I2C_TIMINGR_SCLL(t->scll); |
| 651 | writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR); |
| 652 | |
| 653 | /* Enable I2C */ |
Pierre-Yves MORDRET | 463a921 | 2017-09-21 15:30:09 +0200 | [diff] [blame] | 654 | if (i2c_dev->setup.analog_filter) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 655 | stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, |
| 656 | STM32F7_I2C_CR1_ANFOFF); |
| 657 | else |
| 658 | stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1, |
| 659 | STM32F7_I2C_CR1_ANFOFF); |
| 660 | stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1, |
| 661 | STM32F7_I2C_CR1_PE); |
| 662 | } |
| 663 | |
| 664 | static void stm32f7_i2c_write_tx_data(struct stm32f7_i2c_dev *i2c_dev) |
| 665 | { |
| 666 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 667 | void __iomem *base = i2c_dev->base; |
| 668 | |
| 669 | if (f7_msg->count) { |
| 670 | writeb_relaxed(*f7_msg->buf++, base + STM32F7_I2C_TXDR); |
| 671 | f7_msg->count--; |
| 672 | } |
| 673 | } |
| 674 | |
| 675 | static void stm32f7_i2c_read_rx_data(struct stm32f7_i2c_dev *i2c_dev) |
| 676 | { |
| 677 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 678 | void __iomem *base = i2c_dev->base; |
| 679 | |
| 680 | if (f7_msg->count) { |
| 681 | *f7_msg->buf++ = readb_relaxed(base + STM32F7_I2C_RXDR); |
| 682 | f7_msg->count--; |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 683 | } else { |
| 684 | /* Flush RX buffer has no data is expected */ |
| 685 | readb_relaxed(base + STM32F7_I2C_RXDR); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 686 | } |
| 687 | } |
| 688 | |
| 689 | static void stm32f7_i2c_reload(struct stm32f7_i2c_dev *i2c_dev) |
| 690 | { |
| 691 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 692 | u32 cr2; |
| 693 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 694 | if (i2c_dev->use_dma) |
| 695 | f7_msg->count -= STM32F7_I2C_MAX_LEN; |
| 696 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 697 | cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2); |
| 698 | |
| 699 | cr2 &= ~STM32F7_I2C_CR2_NBYTES_MASK; |
| 700 | if (f7_msg->count > STM32F7_I2C_MAX_LEN) { |
| 701 | cr2 |= STM32F7_I2C_CR2_NBYTES(STM32F7_I2C_MAX_LEN); |
| 702 | } else { |
| 703 | cr2 &= ~STM32F7_I2C_CR2_RELOAD; |
| 704 | cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count); |
| 705 | } |
| 706 | |
| 707 | writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2); |
| 708 | } |
| 709 | |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 710 | static void stm32f7_i2c_smbus_reload(struct stm32f7_i2c_dev *i2c_dev) |
| 711 | { |
| 712 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 713 | u32 cr2; |
| 714 | u8 *val; |
| 715 | |
| 716 | /* |
| 717 | * For I2C_SMBUS_BLOCK_DATA && I2C_SMBUS_BLOCK_PROC_CALL, the first |
| 718 | * data received inform us how many data will follow. |
| 719 | */ |
| 720 | stm32f7_i2c_read_rx_data(i2c_dev); |
| 721 | |
| 722 | /* |
| 723 | * Update NBYTES with the value read to continue the transfer |
| 724 | */ |
| 725 | val = f7_msg->buf - sizeof(u8); |
| 726 | f7_msg->count = *val; |
| 727 | cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2); |
| 728 | cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD); |
| 729 | cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count); |
| 730 | writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2); |
| 731 | } |
| 732 | |
Pierre-Yves MORDRET | 562de4f | 2018-04-11 15:24:58 +0200 | [diff] [blame] | 733 | static int stm32f7_i2c_release_bus(struct i2c_adapter *i2c_adap) |
| 734 | { |
| 735 | struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap); |
| 736 | |
| 737 | dev_info(i2c_dev->dev, "Trying to recover bus\n"); |
| 738 | |
| 739 | stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, |
| 740 | STM32F7_I2C_CR1_PE); |
| 741 | |
| 742 | stm32f7_i2c_hw_config(i2c_dev); |
| 743 | |
| 744 | return 0; |
| 745 | } |
| 746 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 747 | static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev) |
| 748 | { |
| 749 | u32 status; |
| 750 | int ret; |
| 751 | |
| 752 | ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F7_I2C_ISR, |
| 753 | status, |
| 754 | !(status & STM32F7_I2C_ISR_BUSY), |
| 755 | 10, 1000); |
Pierre-Yves MORDRET | 562de4f | 2018-04-11 15:24:58 +0200 | [diff] [blame] | 756 | if (!ret) |
| 757 | return 0; |
| 758 | |
| 759 | dev_info(i2c_dev->dev, "bus busy\n"); |
| 760 | |
| 761 | ret = stm32f7_i2c_release_bus(&i2c_dev->adap); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 762 | if (ret) { |
Pierre-Yves MORDRET | 562de4f | 2018-04-11 15:24:58 +0200 | [diff] [blame] | 763 | dev_err(i2c_dev->dev, "Failed to recover the bus (%d)\n", ret); |
| 764 | return ret; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 765 | } |
| 766 | |
Pierre-Yves MORDRET | 562de4f | 2018-04-11 15:24:58 +0200 | [diff] [blame] | 767 | return -EBUSY; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 768 | } |
| 769 | |
| 770 | static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev, |
| 771 | struct i2c_msg *msg) |
| 772 | { |
| 773 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 774 | void __iomem *base = i2c_dev->base; |
| 775 | u32 cr1, cr2; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 776 | int ret; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 777 | |
| 778 | f7_msg->addr = msg->addr; |
| 779 | f7_msg->buf = msg->buf; |
| 780 | f7_msg->count = msg->len; |
| 781 | f7_msg->result = 0; |
| 782 | f7_msg->stop = (i2c_dev->msg_id >= i2c_dev->msg_num - 1); |
| 783 | |
| 784 | reinit_completion(&i2c_dev->complete); |
| 785 | |
| 786 | cr1 = readl_relaxed(base + STM32F7_I2C_CR1); |
| 787 | cr2 = readl_relaxed(base + STM32F7_I2C_CR2); |
| 788 | |
| 789 | /* Set transfer direction */ |
| 790 | cr2 &= ~STM32F7_I2C_CR2_RD_WRN; |
| 791 | if (msg->flags & I2C_M_RD) |
| 792 | cr2 |= STM32F7_I2C_CR2_RD_WRN; |
| 793 | |
| 794 | /* Set slave address */ |
Pierre-Yves MORDRET | 8c7ecc9 | 2018-04-11 15:24:53 +0200 | [diff] [blame] | 795 | cr2 &= ~(STM32F7_I2C_CR2_HEAD10R | STM32F7_I2C_CR2_ADD10); |
| 796 | if (msg->flags & I2C_M_TEN) { |
| 797 | cr2 &= ~STM32F7_I2C_CR2_SADD10_MASK; |
| 798 | cr2 |= STM32F7_I2C_CR2_SADD10(f7_msg->addr); |
| 799 | cr2 |= STM32F7_I2C_CR2_ADD10; |
| 800 | } else { |
| 801 | cr2 &= ~STM32F7_I2C_CR2_SADD7_MASK; |
| 802 | cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr); |
| 803 | } |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 804 | |
| 805 | /* Set nb bytes to transfer and reload if needed */ |
| 806 | cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD); |
| 807 | if (f7_msg->count > STM32F7_I2C_MAX_LEN) { |
| 808 | cr2 |= STM32F7_I2C_CR2_NBYTES(STM32F7_I2C_MAX_LEN); |
| 809 | cr2 |= STM32F7_I2C_CR2_RELOAD; |
| 810 | } else { |
| 811 | cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count); |
| 812 | } |
| 813 | |
| 814 | /* Enable NACK, STOP, error and transfer complete interrupts */ |
| 815 | cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE | |
| 816 | STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE; |
| 817 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 818 | /* Clear DMA req and TX/RX interrupt */ |
| 819 | cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE | |
| 820 | STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 821 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 822 | /* Configure DMA or enable RX/TX interrupt */ |
| 823 | i2c_dev->use_dma = false; |
| 824 | if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) { |
| 825 | ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma, |
| 826 | msg->flags & I2C_M_RD, |
| 827 | f7_msg->count, f7_msg->buf, |
| 828 | stm32f7_i2c_dma_callback, |
| 829 | i2c_dev); |
| 830 | if (!ret) |
| 831 | i2c_dev->use_dma = true; |
| 832 | else |
| 833 | dev_warn(i2c_dev->dev, "can't use DMA\n"); |
| 834 | } |
| 835 | |
| 836 | if (!i2c_dev->use_dma) { |
| 837 | if (msg->flags & I2C_M_RD) |
| 838 | cr1 |= STM32F7_I2C_CR1_RXIE; |
| 839 | else |
| 840 | cr1 |= STM32F7_I2C_CR1_TXIE; |
| 841 | } else { |
| 842 | if (msg->flags & I2C_M_RD) |
| 843 | cr1 |= STM32F7_I2C_CR1_RXDMAEN; |
| 844 | else |
| 845 | cr1 |= STM32F7_I2C_CR1_TXDMAEN; |
| 846 | } |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 847 | |
| 848 | /* Configure Start/Repeated Start */ |
| 849 | cr2 |= STM32F7_I2C_CR2_START; |
| 850 | |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 851 | i2c_dev->master_mode = true; |
| 852 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 853 | /* Write configurations registers */ |
| 854 | writel_relaxed(cr1, base + STM32F7_I2C_CR1); |
| 855 | writel_relaxed(cr2, base + STM32F7_I2C_CR2); |
| 856 | } |
| 857 | |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 858 | static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev, |
| 859 | unsigned short flags, u8 command, |
| 860 | union i2c_smbus_data *data) |
| 861 | { |
| 862 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 863 | struct device *dev = i2c_dev->dev; |
| 864 | void __iomem *base = i2c_dev->base; |
| 865 | u32 cr1, cr2; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 866 | int i, ret; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 867 | |
| 868 | f7_msg->result = 0; |
| 869 | reinit_completion(&i2c_dev->complete); |
| 870 | |
| 871 | cr2 = readl_relaxed(base + STM32F7_I2C_CR2); |
| 872 | cr1 = readl_relaxed(base + STM32F7_I2C_CR1); |
| 873 | |
| 874 | /* Set transfer direction */ |
| 875 | cr2 &= ~STM32F7_I2C_CR2_RD_WRN; |
| 876 | if (f7_msg->read_write) |
| 877 | cr2 |= STM32F7_I2C_CR2_RD_WRN; |
| 878 | |
| 879 | /* Set slave address */ |
| 880 | cr2 &= ~(STM32F7_I2C_CR2_ADD10 | STM32F7_I2C_CR2_SADD7_MASK); |
| 881 | cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr); |
| 882 | |
| 883 | f7_msg->smbus_buf[0] = command; |
| 884 | switch (f7_msg->size) { |
| 885 | case I2C_SMBUS_QUICK: |
| 886 | f7_msg->stop = true; |
| 887 | f7_msg->count = 0; |
| 888 | break; |
| 889 | case I2C_SMBUS_BYTE: |
| 890 | f7_msg->stop = true; |
| 891 | f7_msg->count = 1; |
| 892 | break; |
| 893 | case I2C_SMBUS_BYTE_DATA: |
| 894 | if (f7_msg->read_write) { |
| 895 | f7_msg->stop = false; |
| 896 | f7_msg->count = 1; |
| 897 | cr2 &= ~STM32F7_I2C_CR2_RD_WRN; |
| 898 | } else { |
| 899 | f7_msg->stop = true; |
| 900 | f7_msg->count = 2; |
| 901 | f7_msg->smbus_buf[1] = data->byte; |
| 902 | } |
| 903 | break; |
| 904 | case I2C_SMBUS_WORD_DATA: |
| 905 | if (f7_msg->read_write) { |
| 906 | f7_msg->stop = false; |
| 907 | f7_msg->count = 1; |
| 908 | cr2 &= ~STM32F7_I2C_CR2_RD_WRN; |
| 909 | } else { |
| 910 | f7_msg->stop = true; |
| 911 | f7_msg->count = 3; |
| 912 | f7_msg->smbus_buf[1] = data->word & 0xff; |
| 913 | f7_msg->smbus_buf[2] = data->word >> 8; |
| 914 | } |
| 915 | break; |
| 916 | case I2C_SMBUS_BLOCK_DATA: |
| 917 | if (f7_msg->read_write) { |
| 918 | f7_msg->stop = false; |
| 919 | f7_msg->count = 1; |
| 920 | cr2 &= ~STM32F7_I2C_CR2_RD_WRN; |
| 921 | } else { |
| 922 | f7_msg->stop = true; |
| 923 | if (data->block[0] > I2C_SMBUS_BLOCK_MAX || |
| 924 | !data->block[0]) { |
| 925 | dev_err(dev, "Invalid block write size %d\n", |
| 926 | data->block[0]); |
| 927 | return -EINVAL; |
| 928 | } |
| 929 | f7_msg->count = data->block[0] + 2; |
| 930 | for (i = 1; i < f7_msg->count; i++) |
| 931 | f7_msg->smbus_buf[i] = data->block[i - 1]; |
| 932 | } |
| 933 | break; |
| 934 | case I2C_SMBUS_PROC_CALL: |
| 935 | f7_msg->stop = false; |
| 936 | f7_msg->count = 3; |
| 937 | f7_msg->smbus_buf[1] = data->word & 0xff; |
| 938 | f7_msg->smbus_buf[2] = data->word >> 8; |
| 939 | cr2 &= ~STM32F7_I2C_CR2_RD_WRN; |
| 940 | f7_msg->read_write = I2C_SMBUS_READ; |
| 941 | break; |
| 942 | case I2C_SMBUS_BLOCK_PROC_CALL: |
| 943 | f7_msg->stop = false; |
| 944 | if (data->block[0] > I2C_SMBUS_BLOCK_MAX - 1) { |
| 945 | dev_err(dev, "Invalid block write size %d\n", |
| 946 | data->block[0]); |
| 947 | return -EINVAL; |
| 948 | } |
| 949 | f7_msg->count = data->block[0] + 2; |
| 950 | for (i = 1; i < f7_msg->count; i++) |
| 951 | f7_msg->smbus_buf[i] = data->block[i - 1]; |
| 952 | cr2 &= ~STM32F7_I2C_CR2_RD_WRN; |
| 953 | f7_msg->read_write = I2C_SMBUS_READ; |
| 954 | break; |
Fabrice Gasnier | 473fbdf | 2019-06-04 15:20:51 +0200 | [diff] [blame] | 955 | case I2C_SMBUS_I2C_BLOCK_DATA: |
| 956 | /* Rely on emulated i2c transfer (through master_xfer) */ |
| 957 | return -EOPNOTSUPP; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 958 | default: |
| 959 | dev_err(dev, "Unsupported smbus protocol %d\n", f7_msg->size); |
| 960 | return -EOPNOTSUPP; |
| 961 | } |
| 962 | |
| 963 | f7_msg->buf = f7_msg->smbus_buf; |
| 964 | |
| 965 | /* Configure PEC */ |
| 966 | if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) { |
| 967 | cr1 |= STM32F7_I2C_CR1_PECEN; |
| 968 | cr2 |= STM32F7_I2C_CR2_PECBYTE; |
| 969 | if (!f7_msg->read_write) |
| 970 | f7_msg->count++; |
| 971 | } else { |
| 972 | cr1 &= ~STM32F7_I2C_CR1_PECEN; |
| 973 | cr2 &= ~STM32F7_I2C_CR2_PECBYTE; |
| 974 | } |
| 975 | |
| 976 | /* Set number of bytes to be transferred */ |
| 977 | cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD); |
| 978 | cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count); |
| 979 | |
| 980 | /* Enable NACK, STOP, error and transfer complete interrupts */ |
| 981 | cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE | |
| 982 | STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE; |
| 983 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 984 | /* Clear DMA req and TX/RX interrupt */ |
| 985 | cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE | |
| 986 | STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN); |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 987 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 988 | /* Configure DMA or enable RX/TX interrupt */ |
| 989 | i2c_dev->use_dma = false; |
| 990 | if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) { |
| 991 | ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma, |
| 992 | cr2 & STM32F7_I2C_CR2_RD_WRN, |
| 993 | f7_msg->count, f7_msg->buf, |
| 994 | stm32f7_i2c_dma_callback, |
| 995 | i2c_dev); |
| 996 | if (!ret) |
| 997 | i2c_dev->use_dma = true; |
| 998 | else |
| 999 | dev_warn(i2c_dev->dev, "can't use DMA\n"); |
| 1000 | } |
| 1001 | |
| 1002 | if (!i2c_dev->use_dma) { |
| 1003 | if (cr2 & STM32F7_I2C_CR2_RD_WRN) |
| 1004 | cr1 |= STM32F7_I2C_CR1_RXIE; |
| 1005 | else |
| 1006 | cr1 |= STM32F7_I2C_CR1_TXIE; |
| 1007 | } else { |
| 1008 | if (cr2 & STM32F7_I2C_CR2_RD_WRN) |
| 1009 | cr1 |= STM32F7_I2C_CR1_RXDMAEN; |
| 1010 | else |
| 1011 | cr1 |= STM32F7_I2C_CR1_TXDMAEN; |
| 1012 | } |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1013 | |
| 1014 | /* Set Start bit */ |
| 1015 | cr2 |= STM32F7_I2C_CR2_START; |
| 1016 | |
| 1017 | i2c_dev->master_mode = true; |
| 1018 | |
| 1019 | /* Write configurations registers */ |
| 1020 | writel_relaxed(cr1, base + STM32F7_I2C_CR1); |
| 1021 | writel_relaxed(cr2, base + STM32F7_I2C_CR2); |
| 1022 | |
| 1023 | return 0; |
| 1024 | } |
| 1025 | |
| 1026 | static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev) |
| 1027 | { |
| 1028 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 1029 | void __iomem *base = i2c_dev->base; |
| 1030 | u32 cr1, cr2; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1031 | int ret; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1032 | |
| 1033 | cr2 = readl_relaxed(base + STM32F7_I2C_CR2); |
| 1034 | cr1 = readl_relaxed(base + STM32F7_I2C_CR1); |
| 1035 | |
| 1036 | /* Set transfer direction */ |
| 1037 | cr2 |= STM32F7_I2C_CR2_RD_WRN; |
| 1038 | |
| 1039 | switch (f7_msg->size) { |
| 1040 | case I2C_SMBUS_BYTE_DATA: |
| 1041 | f7_msg->count = 1; |
| 1042 | break; |
| 1043 | case I2C_SMBUS_WORD_DATA: |
| 1044 | case I2C_SMBUS_PROC_CALL: |
| 1045 | f7_msg->count = 2; |
| 1046 | break; |
| 1047 | case I2C_SMBUS_BLOCK_DATA: |
| 1048 | case I2C_SMBUS_BLOCK_PROC_CALL: |
| 1049 | f7_msg->count = 1; |
| 1050 | cr2 |= STM32F7_I2C_CR2_RELOAD; |
| 1051 | break; |
| 1052 | } |
| 1053 | |
| 1054 | f7_msg->buf = f7_msg->smbus_buf; |
| 1055 | f7_msg->stop = true; |
| 1056 | |
| 1057 | /* Add one byte for PEC if needed */ |
| 1058 | if (cr1 & STM32F7_I2C_CR1_PECEN) |
| 1059 | f7_msg->count++; |
| 1060 | |
| 1061 | /* Set number of bytes to be transferred */ |
| 1062 | cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK); |
| 1063 | cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count); |
| 1064 | |
| 1065 | /* |
| 1066 | * Configure RX/TX interrupt: |
| 1067 | */ |
| 1068 | cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE); |
| 1069 | cr1 |= STM32F7_I2C_CR1_RXIE; |
| 1070 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1071 | /* |
| 1072 | * Configure DMA or enable RX/TX interrupt: |
| 1073 | * For I2C_SMBUS_BLOCK_DATA and I2C_SMBUS_BLOCK_PROC_CALL we don't use |
| 1074 | * dma as we don't know in advance how many data will be received |
| 1075 | */ |
| 1076 | cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE | |
| 1077 | STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN); |
| 1078 | |
| 1079 | i2c_dev->use_dma = false; |
| 1080 | if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN && |
| 1081 | f7_msg->size != I2C_SMBUS_BLOCK_DATA && |
| 1082 | f7_msg->size != I2C_SMBUS_BLOCK_PROC_CALL) { |
| 1083 | ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma, |
| 1084 | cr2 & STM32F7_I2C_CR2_RD_WRN, |
| 1085 | f7_msg->count, f7_msg->buf, |
| 1086 | stm32f7_i2c_dma_callback, |
| 1087 | i2c_dev); |
| 1088 | |
| 1089 | if (!ret) |
| 1090 | i2c_dev->use_dma = true; |
| 1091 | else |
| 1092 | dev_warn(i2c_dev->dev, "can't use DMA\n"); |
| 1093 | } |
| 1094 | |
| 1095 | if (!i2c_dev->use_dma) |
| 1096 | cr1 |= STM32F7_I2C_CR1_RXIE; |
| 1097 | else |
| 1098 | cr1 |= STM32F7_I2C_CR1_RXDMAEN; |
| 1099 | |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1100 | /* Configure Repeated Start */ |
| 1101 | cr2 |= STM32F7_I2C_CR2_START; |
| 1102 | |
| 1103 | /* Write configurations registers */ |
| 1104 | writel_relaxed(cr1, base + STM32F7_I2C_CR1); |
| 1105 | writel_relaxed(cr2, base + STM32F7_I2C_CR2); |
| 1106 | } |
| 1107 | |
| 1108 | static int stm32f7_i2c_smbus_check_pec(struct stm32f7_i2c_dev *i2c_dev) |
| 1109 | { |
| 1110 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 1111 | u8 count, internal_pec, received_pec; |
| 1112 | |
| 1113 | internal_pec = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR); |
| 1114 | |
| 1115 | switch (f7_msg->size) { |
| 1116 | case I2C_SMBUS_BYTE: |
| 1117 | case I2C_SMBUS_BYTE_DATA: |
| 1118 | received_pec = f7_msg->smbus_buf[1]; |
| 1119 | break; |
| 1120 | case I2C_SMBUS_WORD_DATA: |
| 1121 | case I2C_SMBUS_PROC_CALL: |
| 1122 | received_pec = f7_msg->smbus_buf[2]; |
| 1123 | break; |
| 1124 | case I2C_SMBUS_BLOCK_DATA: |
| 1125 | case I2C_SMBUS_BLOCK_PROC_CALL: |
| 1126 | count = f7_msg->smbus_buf[0]; |
| 1127 | received_pec = f7_msg->smbus_buf[count]; |
| 1128 | break; |
| 1129 | default: |
| 1130 | dev_err(i2c_dev->dev, "Unsupported smbus protocol for PEC\n"); |
| 1131 | return -EINVAL; |
| 1132 | } |
| 1133 | |
| 1134 | if (internal_pec != received_pec) { |
| 1135 | dev_err(i2c_dev->dev, "Bad PEC 0x%02x vs. 0x%02x\n", |
| 1136 | internal_pec, received_pec); |
| 1137 | return -EBADMSG; |
| 1138 | } |
| 1139 | |
| 1140 | return 0; |
| 1141 | } |
| 1142 | |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1143 | static bool stm32f7_i2c_is_addr_match(struct i2c_client *slave, u32 addcode) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1144 | { |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1145 | u32 addr; |
| 1146 | |
| 1147 | if (!slave) |
| 1148 | return false; |
| 1149 | |
| 1150 | if (slave->flags & I2C_CLIENT_TEN) { |
| 1151 | /* |
| 1152 | * For 10-bit addr, addcode = 11110XY with |
| 1153 | * X = Bit 9 of slave address |
| 1154 | * Y = Bit 8 of slave address |
| 1155 | */ |
| 1156 | addr = slave->addr >> 8; |
| 1157 | addr |= 0x78; |
| 1158 | if (addr == addcode) |
| 1159 | return true; |
| 1160 | } else { |
| 1161 | addr = slave->addr & 0x7f; |
| 1162 | if (addr == addcode) |
| 1163 | return true; |
| 1164 | } |
| 1165 | |
| 1166 | return false; |
| 1167 | } |
| 1168 | |
| 1169 | static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev) |
| 1170 | { |
| 1171 | struct i2c_client *slave = i2c_dev->slave_running; |
| 1172 | void __iomem *base = i2c_dev->base; |
| 1173 | u32 mask; |
| 1174 | u8 value = 0; |
| 1175 | |
| 1176 | if (i2c_dev->slave_dir) { |
| 1177 | /* Notify i2c slave that new read transfer is starting */ |
| 1178 | i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value); |
| 1179 | |
| 1180 | /* |
| 1181 | * Disable slave TX config in case of I2C combined message |
| 1182 | * (I2C Write followed by I2C Read) |
| 1183 | */ |
| 1184 | mask = STM32F7_I2C_CR2_RELOAD; |
| 1185 | stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, mask); |
| 1186 | mask = STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE | |
| 1187 | STM32F7_I2C_CR1_TCIE; |
| 1188 | stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask); |
| 1189 | |
| 1190 | /* Enable TX empty, STOP, NACK interrupts */ |
| 1191 | mask = STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE | |
| 1192 | STM32F7_I2C_CR1_TXIE; |
| 1193 | stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask); |
| 1194 | |
Fabrice Gasnier | 02e6427 | 2019-09-30 17:28:01 +0200 | [diff] [blame] | 1195 | /* Write 1st data byte */ |
| 1196 | writel_relaxed(value, base + STM32F7_I2C_TXDR); |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1197 | } else { |
| 1198 | /* Notify i2c slave that new write transfer is starting */ |
| 1199 | i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); |
| 1200 | |
| 1201 | /* Set reload mode to be able to ACK/NACK each received byte */ |
| 1202 | mask = STM32F7_I2C_CR2_RELOAD; |
| 1203 | stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask); |
| 1204 | |
| 1205 | /* |
| 1206 | * Set STOP, NACK, RX empty and transfer complete interrupts.* |
| 1207 | * Set Slave Byte Control to be able to ACK/NACK each data |
| 1208 | * byte received |
| 1209 | */ |
| 1210 | mask = STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE | |
| 1211 | STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE | |
| 1212 | STM32F7_I2C_CR1_TCIE; |
| 1213 | stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask); |
| 1214 | } |
| 1215 | } |
| 1216 | |
| 1217 | static void stm32f7_i2c_slave_addr(struct stm32f7_i2c_dev *i2c_dev) |
| 1218 | { |
| 1219 | void __iomem *base = i2c_dev->base; |
| 1220 | u32 isr, addcode, dir, mask; |
| 1221 | int i; |
| 1222 | |
| 1223 | isr = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); |
| 1224 | addcode = STM32F7_I2C_ISR_ADDCODE_GET(isr); |
| 1225 | dir = isr & STM32F7_I2C_ISR_DIR; |
| 1226 | |
| 1227 | for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) { |
| 1228 | if (stm32f7_i2c_is_addr_match(i2c_dev->slave[i], addcode)) { |
| 1229 | i2c_dev->slave_running = i2c_dev->slave[i]; |
| 1230 | i2c_dev->slave_dir = dir; |
| 1231 | |
| 1232 | /* Start I2C slave processing */ |
| 1233 | stm32f7_i2c_slave_start(i2c_dev); |
| 1234 | |
| 1235 | /* Clear ADDR flag */ |
| 1236 | mask = STM32F7_I2C_ICR_ADDRCF; |
| 1237 | writel_relaxed(mask, base + STM32F7_I2C_ICR); |
| 1238 | break; |
| 1239 | } |
| 1240 | } |
| 1241 | } |
| 1242 | |
| 1243 | static int stm32f7_i2c_get_slave_id(struct stm32f7_i2c_dev *i2c_dev, |
| 1244 | struct i2c_client *slave, int *id) |
| 1245 | { |
| 1246 | int i; |
| 1247 | |
| 1248 | for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) { |
| 1249 | if (i2c_dev->slave[i] == slave) { |
| 1250 | *id = i; |
| 1251 | return 0; |
| 1252 | } |
| 1253 | } |
| 1254 | |
| 1255 | dev_err(i2c_dev->dev, "Slave 0x%x not registered\n", slave->addr); |
| 1256 | |
| 1257 | return -ENODEV; |
| 1258 | } |
| 1259 | |
| 1260 | static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev, |
| 1261 | struct i2c_client *slave, int *id) |
| 1262 | { |
| 1263 | struct device *dev = i2c_dev->dev; |
| 1264 | int i; |
| 1265 | |
| 1266 | /* |
| 1267 | * slave[0] supports 7-bit and 10-bit slave address |
| 1268 | * slave[1] supports 7-bit slave address only |
| 1269 | */ |
Alain Volmat | 52d3be7 | 2019-10-15 15:03:09 +0200 | [diff] [blame] | 1270 | for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) { |
Alain Volmat | 7787657 | 2019-11-12 09:19:44 +0100 | [diff] [blame] | 1271 | if (i == 1 && (slave->flags & I2C_CLIENT_TEN)) |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1272 | continue; |
| 1273 | if (!i2c_dev->slave[i]) { |
| 1274 | *id = i; |
| 1275 | return 0; |
| 1276 | } |
| 1277 | } |
| 1278 | |
| 1279 | dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr); |
| 1280 | |
| 1281 | return -EINVAL; |
| 1282 | } |
| 1283 | |
| 1284 | static bool stm32f7_i2c_is_slave_registered(struct stm32f7_i2c_dev *i2c_dev) |
| 1285 | { |
| 1286 | int i; |
| 1287 | |
| 1288 | for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) { |
| 1289 | if (i2c_dev->slave[i]) |
| 1290 | return true; |
| 1291 | } |
| 1292 | |
| 1293 | return false; |
| 1294 | } |
| 1295 | |
| 1296 | static bool stm32f7_i2c_is_slave_busy(struct stm32f7_i2c_dev *i2c_dev) |
| 1297 | { |
| 1298 | int i, busy; |
| 1299 | |
| 1300 | busy = 0; |
| 1301 | for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) { |
| 1302 | if (i2c_dev->slave[i]) |
| 1303 | busy++; |
| 1304 | } |
| 1305 | |
| 1306 | return i == busy; |
| 1307 | } |
| 1308 | |
| 1309 | static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev) |
| 1310 | { |
| 1311 | void __iomem *base = i2c_dev->base; |
| 1312 | u32 cr2, status, mask; |
| 1313 | u8 val; |
| 1314 | int ret; |
| 1315 | |
| 1316 | status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); |
| 1317 | |
| 1318 | /* Slave transmitter mode */ |
| 1319 | if (status & STM32F7_I2C_ISR_TXIS) { |
| 1320 | i2c_slave_event(i2c_dev->slave_running, |
| 1321 | I2C_SLAVE_READ_PROCESSED, |
| 1322 | &val); |
| 1323 | |
| 1324 | /* Write data byte */ |
| 1325 | writel_relaxed(val, base + STM32F7_I2C_TXDR); |
| 1326 | } |
| 1327 | |
| 1328 | /* Transfer Complete Reload for Slave receiver mode */ |
| 1329 | if (status & STM32F7_I2C_ISR_TCR || status & STM32F7_I2C_ISR_RXNE) { |
| 1330 | /* |
| 1331 | * Read data byte then set NBYTES to receive next byte or NACK |
| 1332 | * the current received byte |
| 1333 | */ |
| 1334 | val = readb_relaxed(i2c_dev->base + STM32F7_I2C_RXDR); |
| 1335 | ret = i2c_slave_event(i2c_dev->slave_running, |
| 1336 | I2C_SLAVE_WRITE_RECEIVED, |
| 1337 | &val); |
| 1338 | if (!ret) { |
| 1339 | cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2); |
| 1340 | cr2 |= STM32F7_I2C_CR2_NBYTES(1); |
| 1341 | writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2); |
| 1342 | } else { |
| 1343 | mask = STM32F7_I2C_CR2_NACK; |
| 1344 | stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask); |
| 1345 | } |
| 1346 | } |
| 1347 | |
| 1348 | /* NACK received */ |
| 1349 | if (status & STM32F7_I2C_ISR_NACKF) { |
| 1350 | dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__); |
| 1351 | writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR); |
| 1352 | } |
| 1353 | |
| 1354 | /* STOP received */ |
| 1355 | if (status & STM32F7_I2C_ISR_STOPF) { |
| 1356 | /* Disable interrupts */ |
| 1357 | stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_XFER_IRQ_MASK); |
| 1358 | |
| 1359 | if (i2c_dev->slave_dir) { |
| 1360 | /* |
| 1361 | * Flush TX buffer in order to not used the byte in |
| 1362 | * TXDR for the next transfer |
| 1363 | */ |
| 1364 | mask = STM32F7_I2C_ISR_TXE; |
| 1365 | stm32f7_i2c_set_bits(base + STM32F7_I2C_ISR, mask); |
| 1366 | } |
| 1367 | |
| 1368 | /* Clear STOP flag */ |
| 1369 | writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR); |
| 1370 | |
| 1371 | /* Notify i2c slave that a STOP flag has been detected */ |
| 1372 | i2c_slave_event(i2c_dev->slave_running, I2C_SLAVE_STOP, &val); |
| 1373 | |
| 1374 | i2c_dev->slave_running = NULL; |
| 1375 | } |
| 1376 | |
| 1377 | /* Address match received */ |
| 1378 | if (status & STM32F7_I2C_ISR_ADDR) |
| 1379 | stm32f7_i2c_slave_addr(i2c_dev); |
| 1380 | |
| 1381 | return IRQ_HANDLED; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1382 | } |
| 1383 | |
| 1384 | static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data) |
| 1385 | { |
| 1386 | struct stm32f7_i2c_dev *i2c_dev = data; |
| 1387 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 1388 | void __iomem *base = i2c_dev->base; |
| 1389 | u32 status, mask; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1390 | int ret = IRQ_HANDLED; |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1391 | |
| 1392 | /* Check if the interrupt if for a slave device */ |
| 1393 | if (!i2c_dev->master_mode) { |
| 1394 | ret = stm32f7_i2c_slave_isr_event(i2c_dev); |
| 1395 | return ret; |
| 1396 | } |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1397 | |
| 1398 | status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); |
| 1399 | |
| 1400 | /* Tx empty */ |
| 1401 | if (status & STM32F7_I2C_ISR_TXIS) |
| 1402 | stm32f7_i2c_write_tx_data(i2c_dev); |
| 1403 | |
| 1404 | /* RX not empty */ |
| 1405 | if (status & STM32F7_I2C_ISR_RXNE) |
| 1406 | stm32f7_i2c_read_rx_data(i2c_dev); |
| 1407 | |
| 1408 | /* NACK received */ |
| 1409 | if (status & STM32F7_I2C_ISR_NACKF) { |
| 1410 | dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__); |
| 1411 | writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR); |
| 1412 | f7_msg->result = -ENXIO; |
| 1413 | } |
| 1414 | |
| 1415 | /* STOP detection flag */ |
| 1416 | if (status & STM32F7_I2C_ISR_STOPF) { |
| 1417 | /* Disable interrupts */ |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1418 | if (stm32f7_i2c_is_slave_registered(i2c_dev)) |
| 1419 | mask = STM32F7_I2C_XFER_IRQ_MASK; |
| 1420 | else |
| 1421 | mask = STM32F7_I2C_ALL_IRQ_MASK; |
| 1422 | stm32f7_i2c_disable_irq(i2c_dev, mask); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1423 | |
| 1424 | /* Clear STOP flag */ |
| 1425 | writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR); |
| 1426 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1427 | if (i2c_dev->use_dma) { |
| 1428 | ret = IRQ_WAKE_THREAD; |
| 1429 | } else { |
| 1430 | i2c_dev->master_mode = false; |
| 1431 | complete(&i2c_dev->complete); |
| 1432 | } |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1433 | } |
| 1434 | |
| 1435 | /* Transfer complete */ |
| 1436 | if (status & STM32F7_I2C_ISR_TC) { |
| 1437 | if (f7_msg->stop) { |
| 1438 | mask = STM32F7_I2C_CR2_STOP; |
| 1439 | stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask); |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1440 | } else if (i2c_dev->use_dma) { |
| 1441 | ret = IRQ_WAKE_THREAD; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1442 | } else if (f7_msg->smbus) { |
| 1443 | stm32f7_i2c_smbus_rep_start(i2c_dev); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1444 | } else { |
| 1445 | i2c_dev->msg_id++; |
| 1446 | i2c_dev->msg++; |
| 1447 | stm32f7_i2c_xfer_msg(i2c_dev, i2c_dev->msg); |
| 1448 | } |
| 1449 | } |
| 1450 | |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1451 | if (status & STM32F7_I2C_ISR_TCR) { |
| 1452 | if (f7_msg->smbus) |
| 1453 | stm32f7_i2c_smbus_reload(i2c_dev); |
| 1454 | else |
| 1455 | stm32f7_i2c_reload(i2c_dev); |
| 1456 | } |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1457 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1458 | return ret; |
| 1459 | } |
| 1460 | |
| 1461 | static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data) |
| 1462 | { |
| 1463 | struct stm32f7_i2c_dev *i2c_dev = data; |
| 1464 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 1465 | struct stm32_i2c_dma *dma = i2c_dev->dma; |
| 1466 | u32 status; |
| 1467 | int ret; |
| 1468 | |
| 1469 | /* |
| 1470 | * Wait for dma transfer completion before sending next message or |
| 1471 | * notity the end of xfer to the client |
| 1472 | */ |
| 1473 | ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ); |
| 1474 | if (!ret) { |
| 1475 | dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__); |
| 1476 | stm32f7_i2c_disable_dma_req(i2c_dev); |
| 1477 | dmaengine_terminate_all(dma->chan_using); |
| 1478 | f7_msg->result = -ETIMEDOUT; |
| 1479 | } |
| 1480 | |
| 1481 | status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); |
| 1482 | |
| 1483 | if (status & STM32F7_I2C_ISR_TC) { |
| 1484 | if (f7_msg->smbus) { |
| 1485 | stm32f7_i2c_smbus_rep_start(i2c_dev); |
| 1486 | } else { |
| 1487 | i2c_dev->msg_id++; |
| 1488 | i2c_dev->msg++; |
| 1489 | stm32f7_i2c_xfer_msg(i2c_dev, i2c_dev->msg); |
| 1490 | } |
| 1491 | } else { |
| 1492 | i2c_dev->master_mode = false; |
| 1493 | complete(&i2c_dev->complete); |
| 1494 | } |
| 1495 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1496 | return IRQ_HANDLED; |
| 1497 | } |
| 1498 | |
| 1499 | static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data) |
| 1500 | { |
| 1501 | struct stm32f7_i2c_dev *i2c_dev = data; |
| 1502 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
| 1503 | void __iomem *base = i2c_dev->base; |
| 1504 | struct device *dev = i2c_dev->dev; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1505 | struct stm32_i2c_dma *dma = i2c_dev->dma; |
Fabrice Gasnier | 6d6b0d0 | 2019-10-01 10:51:09 +0200 | [diff] [blame] | 1506 | u32 status; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1507 | |
| 1508 | status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); |
| 1509 | |
| 1510 | /* Bus error */ |
| 1511 | if (status & STM32F7_I2C_ISR_BERR) { |
| 1512 | dev_err(dev, "<%s>: Bus error\n", __func__); |
| 1513 | writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR); |
Pierre-Yves MORDRET | 562de4f | 2018-04-11 15:24:58 +0200 | [diff] [blame] | 1514 | stm32f7_i2c_release_bus(&i2c_dev->adap); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1515 | f7_msg->result = -EIO; |
| 1516 | } |
| 1517 | |
| 1518 | /* Arbitration loss */ |
| 1519 | if (status & STM32F7_I2C_ISR_ARLO) { |
| 1520 | dev_dbg(dev, "<%s>: Arbitration loss\n", __func__); |
| 1521 | writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR); |
| 1522 | f7_msg->result = -EAGAIN; |
| 1523 | } |
| 1524 | |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1525 | if (status & STM32F7_I2C_ISR_PECERR) { |
| 1526 | dev_err(dev, "<%s>: PEC error in reception\n", __func__); |
| 1527 | writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR); |
| 1528 | f7_msg->result = -EINVAL; |
| 1529 | } |
| 1530 | |
Fabrice Gasnier | 6d6b0d0 | 2019-10-01 10:51:09 +0200 | [diff] [blame] | 1531 | if (!i2c_dev->slave_running) { |
| 1532 | u32 mask; |
| 1533 | /* Disable interrupts */ |
| 1534 | if (stm32f7_i2c_is_slave_registered(i2c_dev)) |
| 1535 | mask = STM32F7_I2C_XFER_IRQ_MASK; |
| 1536 | else |
| 1537 | mask = STM32F7_I2C_ALL_IRQ_MASK; |
| 1538 | stm32f7_i2c_disable_irq(i2c_dev, mask); |
| 1539 | } |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1540 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1541 | /* Disable dma */ |
| 1542 | if (i2c_dev->use_dma) { |
| 1543 | stm32f7_i2c_disable_dma_req(i2c_dev); |
| 1544 | dmaengine_terminate_all(dma->chan_using); |
| 1545 | } |
| 1546 | |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1547 | i2c_dev->master_mode = false; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1548 | complete(&i2c_dev->complete); |
| 1549 | |
| 1550 | return IRQ_HANDLED; |
| 1551 | } |
| 1552 | |
| 1553 | static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap, |
| 1554 | struct i2c_msg msgs[], int num) |
| 1555 | { |
| 1556 | struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap); |
| 1557 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1558 | struct stm32_i2c_dma *dma = i2c_dev->dma; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1559 | unsigned long time_left; |
| 1560 | int ret; |
| 1561 | |
| 1562 | i2c_dev->msg = msgs; |
| 1563 | i2c_dev->msg_num = num; |
| 1564 | i2c_dev->msg_id = 0; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1565 | f7_msg->smbus = false; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1566 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1567 | ret = pm_runtime_get_sync(i2c_dev->dev); |
| 1568 | if (ret < 0) |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1569 | return ret; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1570 | |
| 1571 | ret = stm32f7_i2c_wait_free_bus(i2c_dev); |
| 1572 | if (ret) |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1573 | goto pm_free; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1574 | |
| 1575 | stm32f7_i2c_xfer_msg(i2c_dev, msgs); |
| 1576 | |
| 1577 | time_left = wait_for_completion_timeout(&i2c_dev->complete, |
| 1578 | i2c_dev->adap.timeout); |
| 1579 | ret = f7_msg->result; |
| 1580 | |
| 1581 | if (!time_left) { |
| 1582 | dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n", |
| 1583 | i2c_dev->msg->addr); |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1584 | if (i2c_dev->use_dma) |
| 1585 | dmaengine_terminate_all(dma->chan_using); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1586 | ret = -ETIMEDOUT; |
| 1587 | } |
| 1588 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1589 | pm_free: |
| 1590 | pm_runtime_mark_last_busy(i2c_dev->dev); |
| 1591 | pm_runtime_put_autosuspend(i2c_dev->dev); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1592 | |
| 1593 | return (ret < 0) ? ret : num; |
| 1594 | } |
| 1595 | |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1596 | static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, |
| 1597 | unsigned short flags, char read_write, |
| 1598 | u8 command, int size, |
| 1599 | union i2c_smbus_data *data) |
| 1600 | { |
| 1601 | struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adapter); |
| 1602 | struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1603 | struct stm32_i2c_dma *dma = i2c_dev->dma; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1604 | struct device *dev = i2c_dev->dev; |
| 1605 | unsigned long timeout; |
| 1606 | int i, ret; |
| 1607 | |
| 1608 | f7_msg->addr = addr; |
| 1609 | f7_msg->size = size; |
| 1610 | f7_msg->read_write = read_write; |
| 1611 | f7_msg->smbus = true; |
| 1612 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1613 | ret = pm_runtime_get_sync(dev); |
| 1614 | if (ret < 0) |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1615 | return ret; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1616 | |
| 1617 | ret = stm32f7_i2c_wait_free_bus(i2c_dev); |
| 1618 | if (ret) |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1619 | goto pm_free; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1620 | |
| 1621 | ret = stm32f7_i2c_smbus_xfer_msg(i2c_dev, flags, command, data); |
| 1622 | if (ret) |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1623 | goto pm_free; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1624 | |
| 1625 | timeout = wait_for_completion_timeout(&i2c_dev->complete, |
| 1626 | i2c_dev->adap.timeout); |
| 1627 | ret = f7_msg->result; |
| 1628 | if (ret) |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1629 | goto pm_free; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1630 | |
| 1631 | if (!timeout) { |
| 1632 | dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr); |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1633 | if (i2c_dev->use_dma) |
| 1634 | dmaengine_terminate_all(dma->chan_using); |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1635 | ret = -ETIMEDOUT; |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1636 | goto pm_free; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1637 | } |
| 1638 | |
| 1639 | /* Check PEC */ |
| 1640 | if ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && read_write) { |
| 1641 | ret = stm32f7_i2c_smbus_check_pec(i2c_dev); |
| 1642 | if (ret) |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1643 | goto pm_free; |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1644 | } |
| 1645 | |
| 1646 | if (read_write && size != I2C_SMBUS_QUICK) { |
| 1647 | switch (size) { |
| 1648 | case I2C_SMBUS_BYTE: |
| 1649 | case I2C_SMBUS_BYTE_DATA: |
| 1650 | data->byte = f7_msg->smbus_buf[0]; |
| 1651 | break; |
| 1652 | case I2C_SMBUS_WORD_DATA: |
| 1653 | case I2C_SMBUS_PROC_CALL: |
| 1654 | data->word = f7_msg->smbus_buf[0] | |
| 1655 | (f7_msg->smbus_buf[1] << 8); |
| 1656 | break; |
| 1657 | case I2C_SMBUS_BLOCK_DATA: |
| 1658 | case I2C_SMBUS_BLOCK_PROC_CALL: |
| 1659 | for (i = 0; i <= f7_msg->smbus_buf[0]; i++) |
| 1660 | data->block[i] = f7_msg->smbus_buf[i]; |
| 1661 | break; |
| 1662 | default: |
| 1663 | dev_err(dev, "Unsupported smbus transaction\n"); |
| 1664 | ret = -EINVAL; |
| 1665 | } |
| 1666 | } |
| 1667 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1668 | pm_free: |
| 1669 | pm_runtime_mark_last_busy(dev); |
| 1670 | pm_runtime_put_autosuspend(dev); |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1671 | return ret; |
| 1672 | } |
| 1673 | |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1674 | static int stm32f7_i2c_reg_slave(struct i2c_client *slave) |
| 1675 | { |
| 1676 | struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter); |
| 1677 | void __iomem *base = i2c_dev->base; |
| 1678 | struct device *dev = i2c_dev->dev; |
| 1679 | u32 oar1, oar2, mask; |
| 1680 | int id, ret; |
| 1681 | |
| 1682 | if (slave->flags & I2C_CLIENT_PEC) { |
| 1683 | dev_err(dev, "SMBus PEC not supported in slave mode\n"); |
| 1684 | return -EINVAL; |
| 1685 | } |
| 1686 | |
| 1687 | if (stm32f7_i2c_is_slave_busy(i2c_dev)) { |
| 1688 | dev_err(dev, "Too much slave registered\n"); |
| 1689 | return -EBUSY; |
| 1690 | } |
| 1691 | |
| 1692 | ret = stm32f7_i2c_get_free_slave_id(i2c_dev, slave, &id); |
| 1693 | if (ret) |
| 1694 | return ret; |
| 1695 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1696 | ret = pm_runtime_get_sync(dev); |
| 1697 | if (ret < 0) |
| 1698 | return ret; |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1699 | |
| 1700 | if (id == 0) { |
| 1701 | /* Configure Own Address 1 */ |
| 1702 | oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1); |
| 1703 | oar1 &= ~STM32F7_I2C_OAR1_MASK; |
| 1704 | if (slave->flags & I2C_CLIENT_TEN) { |
| 1705 | oar1 |= STM32F7_I2C_OAR1_OA1_10(slave->addr); |
| 1706 | oar1 |= STM32F7_I2C_OAR1_OA1MODE; |
| 1707 | } else { |
| 1708 | oar1 |= STM32F7_I2C_OAR1_OA1_7(slave->addr); |
| 1709 | } |
| 1710 | oar1 |= STM32F7_I2C_OAR1_OA1EN; |
| 1711 | i2c_dev->slave[id] = slave; |
| 1712 | writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1); |
| 1713 | } else if (id == 1) { |
| 1714 | /* Configure Own Address 2 */ |
| 1715 | oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2); |
| 1716 | oar2 &= ~STM32F7_I2C_OAR2_MASK; |
| 1717 | if (slave->flags & I2C_CLIENT_TEN) { |
| 1718 | ret = -EOPNOTSUPP; |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1719 | goto pm_free; |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1720 | } |
| 1721 | |
| 1722 | oar2 |= STM32F7_I2C_OAR2_OA2_7(slave->addr); |
| 1723 | oar2 |= STM32F7_I2C_OAR2_OA2EN; |
| 1724 | i2c_dev->slave[id] = slave; |
| 1725 | writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2); |
| 1726 | } else { |
| 1727 | ret = -ENODEV; |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1728 | goto pm_free; |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1729 | } |
| 1730 | |
| 1731 | /* Enable ACK */ |
| 1732 | stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, STM32F7_I2C_CR2_NACK); |
| 1733 | |
| 1734 | /* Enable Address match interrupt, error interrupt and enable I2C */ |
| 1735 | mask = STM32F7_I2C_CR1_ADDRIE | STM32F7_I2C_CR1_ERRIE | |
| 1736 | STM32F7_I2C_CR1_PE; |
| 1737 | stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask); |
| 1738 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1739 | ret = 0; |
| 1740 | pm_free: |
| 1741 | pm_runtime_mark_last_busy(dev); |
| 1742 | pm_runtime_put_autosuspend(dev); |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1743 | |
| 1744 | return ret; |
| 1745 | } |
| 1746 | |
| 1747 | static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) |
| 1748 | { |
| 1749 | struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter); |
| 1750 | void __iomem *base = i2c_dev->base; |
| 1751 | u32 mask; |
| 1752 | int id, ret; |
| 1753 | |
| 1754 | ret = stm32f7_i2c_get_slave_id(i2c_dev, slave, &id); |
| 1755 | if (ret) |
| 1756 | return ret; |
| 1757 | |
| 1758 | WARN_ON(!i2c_dev->slave[id]); |
| 1759 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1760 | ret = pm_runtime_get_sync(i2c_dev->dev); |
| 1761 | if (ret < 0) |
| 1762 | return ret; |
| 1763 | |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1764 | if (id == 0) { |
| 1765 | mask = STM32F7_I2C_OAR1_OA1EN; |
| 1766 | stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask); |
| 1767 | } else { |
| 1768 | mask = STM32F7_I2C_OAR2_OA2EN; |
| 1769 | stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask); |
| 1770 | } |
| 1771 | |
| 1772 | i2c_dev->slave[id] = NULL; |
| 1773 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1774 | if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1775 | stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK); |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1776 | |
| 1777 | pm_runtime_mark_last_busy(i2c_dev->dev); |
| 1778 | pm_runtime_put_autosuspend(i2c_dev->dev); |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1779 | |
| 1780 | return 0; |
| 1781 | } |
| 1782 | |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 1783 | static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev, |
| 1784 | struct stm32f7_i2c_dev *i2c_dev) |
| 1785 | { |
| 1786 | struct device_node *np = pdev->dev.of_node; |
| 1787 | int ret; |
| 1788 | u32 reg, mask; |
| 1789 | |
| 1790 | i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp"); |
| 1791 | if (IS_ERR(i2c_dev->regmap)) { |
| 1792 | /* Optional */ |
| 1793 | return 0; |
| 1794 | } |
| 1795 | |
| 1796 | ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1, ®); |
| 1797 | if (ret) |
| 1798 | return ret; |
| 1799 | |
| 1800 | ret = of_property_read_u32_index(np, "st,syscfg-fmp", 2, &mask); |
| 1801 | if (ret) |
| 1802 | return ret; |
| 1803 | |
| 1804 | return regmap_update_bits(i2c_dev->regmap, reg, mask, mask); |
| 1805 | } |
| 1806 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1807 | static u32 stm32f7_i2c_func(struct i2c_adapter *adap) |
| 1808 | { |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1809 | return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE | |
| 1810 | I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | |
| 1811 | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | |
| 1812 | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | |
Fabrice Gasnier | 473fbdf | 2019-06-04 15:20:51 +0200 | [diff] [blame] | 1813 | I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC | |
| 1814 | I2C_FUNC_SMBUS_I2C_BLOCK; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1815 | } |
| 1816 | |
Nishka Dasgupta | 2252c31 | 2019-08-15 11:28:57 +0530 | [diff] [blame] | 1817 | static const struct i2c_algorithm stm32f7_i2c_algo = { |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1818 | .master_xfer = stm32f7_i2c_xfer, |
Pierre-Yves MORDRET | 9e48155 | 2018-04-11 15:24:55 +0200 | [diff] [blame] | 1819 | .smbus_xfer = stm32f7_i2c_smbus_xfer, |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1820 | .functionality = stm32f7_i2c_func, |
Pierre-Yves MORDRET | 60d609f | 2018-04-11 15:24:54 +0200 | [diff] [blame] | 1821 | .reg_slave = stm32f7_i2c_reg_slave, |
| 1822 | .unreg_slave = stm32f7_i2c_unreg_slave, |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1823 | }; |
| 1824 | |
| 1825 | static int stm32f7_i2c_probe(struct platform_device *pdev) |
| 1826 | { |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1827 | struct stm32f7_i2c_dev *i2c_dev; |
| 1828 | const struct stm32f7_i2c_setup *setup; |
| 1829 | struct resource *res; |
Fabrice Gasnier | 79b4499 | 2019-06-17 09:53:01 +0200 | [diff] [blame] | 1830 | u32 clk_rate, rise_time, fall_time; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1831 | struct i2c_adapter *adap; |
| 1832 | struct reset_control *rst; |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1833 | dma_addr_t phy_addr; |
Fabrice Gasnier | 79b4499 | 2019-06-17 09:53:01 +0200 | [diff] [blame] | 1834 | int irq_error, irq_event, ret; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1835 | |
| 1836 | i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); |
| 1837 | if (!i2c_dev) |
| 1838 | return -ENOMEM; |
| 1839 | |
| 1840 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1841 | i2c_dev->base = devm_ioremap_resource(&pdev->dev, res); |
| 1842 | if (IS_ERR(i2c_dev->base)) |
| 1843 | return PTR_ERR(i2c_dev->base); |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1844 | phy_addr = (dma_addr_t)res->start; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1845 | |
Fabrice Gasnier | 79b4499 | 2019-06-17 09:53:01 +0200 | [diff] [blame] | 1846 | irq_event = platform_get_irq(pdev, 0); |
| 1847 | if (irq_event <= 0) { |
| 1848 | if (irq_event != -EPROBE_DEFER) |
| 1849 | dev_err(&pdev->dev, "Failed to get IRQ event: %d\n", |
| 1850 | irq_event); |
| 1851 | return irq_event ? : -ENOENT; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1852 | } |
| 1853 | |
Fabrice Gasnier | 79b4499 | 2019-06-17 09:53:01 +0200 | [diff] [blame] | 1854 | irq_error = platform_get_irq(pdev, 1); |
| 1855 | if (irq_error <= 0) { |
| 1856 | if (irq_error != -EPROBE_DEFER) |
| 1857 | dev_err(&pdev->dev, "Failed to get IRQ error: %d\n", |
| 1858 | irq_error); |
| 1859 | return irq_error ? : -ENOENT; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1860 | } |
| 1861 | |
| 1862 | i2c_dev->clk = devm_clk_get(&pdev->dev, NULL); |
| 1863 | if (IS_ERR(i2c_dev->clk)) { |
| 1864 | dev_err(&pdev->dev, "Error: Missing controller clock\n"); |
| 1865 | return PTR_ERR(i2c_dev->clk); |
| 1866 | } |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1867 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1868 | ret = clk_prepare_enable(i2c_dev->clk); |
| 1869 | if (ret) { |
| 1870 | dev_err(&pdev->dev, "Failed to prepare_enable clock\n"); |
| 1871 | return ret; |
| 1872 | } |
| 1873 | |
| 1874 | i2c_dev->speed = STM32_I2C_SPEED_STANDARD; |
| 1875 | ret = device_property_read_u32(&pdev->dev, "clock-frequency", |
| 1876 | &clk_rate); |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 1877 | if (!ret && clk_rate >= 1000000) { |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1878 | i2c_dev->speed = STM32_I2C_SPEED_FAST_PLUS; |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 1879 | ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev); |
| 1880 | if (ret) |
| 1881 | goto clk_free; |
| 1882 | } else if (!ret && clk_rate >= 400000) { |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1883 | i2c_dev->speed = STM32_I2C_SPEED_FAST; |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 1884 | } else if (!ret && clk_rate >= 100000) { |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1885 | i2c_dev->speed = STM32_I2C_SPEED_STANDARD; |
Pierre-Yves MORDRET | cb944fb | 2018-11-19 12:03:32 +0100 | [diff] [blame] | 1886 | } |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1887 | |
| 1888 | rst = devm_reset_control_get(&pdev->dev, NULL); |
| 1889 | if (IS_ERR(rst)) { |
| 1890 | dev_err(&pdev->dev, "Error: Missing controller reset\n"); |
| 1891 | ret = PTR_ERR(rst); |
| 1892 | goto clk_free; |
| 1893 | } |
| 1894 | reset_control_assert(rst); |
| 1895 | udelay(2); |
| 1896 | reset_control_deassert(rst); |
| 1897 | |
| 1898 | i2c_dev->dev = &pdev->dev; |
| 1899 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1900 | ret = devm_request_threaded_irq(&pdev->dev, irq_event, |
| 1901 | stm32f7_i2c_isr_event, |
| 1902 | stm32f7_i2c_isr_event_thread, |
| 1903 | IRQF_ONESHOT, |
| 1904 | pdev->name, i2c_dev); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1905 | if (ret) { |
| 1906 | dev_err(&pdev->dev, "Failed to request irq event %i\n", |
| 1907 | irq_event); |
| 1908 | goto clk_free; |
| 1909 | } |
| 1910 | |
| 1911 | ret = devm_request_irq(&pdev->dev, irq_error, stm32f7_i2c_isr_error, 0, |
| 1912 | pdev->name, i2c_dev); |
| 1913 | if (ret) { |
| 1914 | dev_err(&pdev->dev, "Failed to request irq error %i\n", |
| 1915 | irq_error); |
| 1916 | goto clk_free; |
| 1917 | } |
| 1918 | |
| 1919 | setup = of_device_get_match_data(&pdev->dev); |
Pierre-Yves MORDRET | 771b7bf | 2018-03-21 17:48:40 +0100 | [diff] [blame] | 1920 | if (!setup) { |
| 1921 | dev_err(&pdev->dev, "Can't get device data\n"); |
| 1922 | ret = -ENODEV; |
| 1923 | goto clk_free; |
| 1924 | } |
Pierre-Yves MORDRET | 463a921 | 2017-09-21 15:30:09 +0200 | [diff] [blame] | 1925 | i2c_dev->setup = *setup; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1926 | |
| 1927 | ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns", |
| 1928 | &rise_time); |
| 1929 | if (!ret) |
Pierre-Yves MORDRET | 463a921 | 2017-09-21 15:30:09 +0200 | [diff] [blame] | 1930 | i2c_dev->setup.rise_time = rise_time; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1931 | |
| 1932 | ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns", |
| 1933 | &fall_time); |
| 1934 | if (!ret) |
Pierre-Yves MORDRET | 463a921 | 2017-09-21 15:30:09 +0200 | [diff] [blame] | 1935 | i2c_dev->setup.fall_time = fall_time; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1936 | |
Pierre-Yves MORDRET | 463a921 | 2017-09-21 15:30:09 +0200 | [diff] [blame] | 1937 | ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1938 | if (ret) |
| 1939 | goto clk_free; |
| 1940 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1941 | adap = &i2c_dev->adap; |
| 1942 | i2c_set_adapdata(adap, i2c_dev); |
| 1943 | snprintf(adap->name, sizeof(adap->name), "STM32F7 I2C(%pa)", |
| 1944 | &res->start); |
| 1945 | adap->owner = THIS_MODULE; |
| 1946 | adap->timeout = 2 * HZ; |
| 1947 | adap->retries = 3; |
| 1948 | adap->algo = &stm32f7_i2c_algo; |
| 1949 | adap->dev.parent = &pdev->dev; |
| 1950 | adap->dev.of_node = pdev->dev.of_node; |
| 1951 | |
| 1952 | init_completion(&i2c_dev->complete); |
| 1953 | |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1954 | /* Init DMA config if supported */ |
| 1955 | i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr, |
| 1956 | STM32F7_I2C_TXDR, |
| 1957 | STM32F7_I2C_RXDR); |
Alain Volmat | d77eceb | 2019-10-24 14:52:00 +0200 | [diff] [blame] | 1958 | if (PTR_ERR(i2c_dev->dma) == -ENODEV) |
| 1959 | i2c_dev->dma = NULL; |
| 1960 | else if (IS_ERR(i2c_dev->dma)) { |
| 1961 | ret = PTR_ERR(i2c_dev->dma); |
| 1962 | if (ret != -EPROBE_DEFER) |
| 1963 | dev_err(&pdev->dev, |
| 1964 | "Failed to request dma error %i\n", ret); |
| 1965 | goto clk_free; |
| 1966 | } |
Pierre-Yves MORDRET | 7ecc8cf | 2018-04-11 15:24:57 +0200 | [diff] [blame] | 1967 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1968 | platform_set_drvdata(pdev, i2c_dev); |
| 1969 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1970 | pm_runtime_set_autosuspend_delay(i2c_dev->dev, |
| 1971 | STM32F7_AUTOSUSPEND_DELAY); |
| 1972 | pm_runtime_use_autosuspend(i2c_dev->dev); |
| 1973 | pm_runtime_set_active(i2c_dev->dev); |
| 1974 | pm_runtime_enable(i2c_dev->dev); |
| 1975 | |
| 1976 | pm_runtime_get_noresume(&pdev->dev); |
| 1977 | |
| 1978 | stm32f7_i2c_hw_config(i2c_dev); |
| 1979 | |
| 1980 | ret = i2c_add_adapter(adap); |
| 1981 | if (ret) |
| 1982 | goto pm_disable; |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1983 | |
| 1984 | dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr); |
| 1985 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1986 | pm_runtime_mark_last_busy(i2c_dev->dev); |
| 1987 | pm_runtime_put_autosuspend(i2c_dev->dev); |
| 1988 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 1989 | return 0; |
| 1990 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 1991 | pm_disable: |
| 1992 | pm_runtime_put_noidle(i2c_dev->dev); |
| 1993 | pm_runtime_disable(i2c_dev->dev); |
| 1994 | pm_runtime_set_suspended(i2c_dev->dev); |
| 1995 | pm_runtime_dont_use_autosuspend(i2c_dev->dev); |
| 1996 | |
Alain Volmat | 53aaaa5 | 2019-10-25 16:04:24 +0200 | [diff] [blame] | 1997 | if (i2c_dev->dma) { |
| 1998 | stm32_i2c_dma_free(i2c_dev->dma); |
| 1999 | i2c_dev->dma = NULL; |
| 2000 | } |
| 2001 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2002 | clk_free: |
| 2003 | clk_disable_unprepare(i2c_dev->clk); |
| 2004 | |
| 2005 | return ret; |
| 2006 | } |
| 2007 | |
| 2008 | static int stm32f7_i2c_remove(struct platform_device *pdev) |
| 2009 | { |
| 2010 | struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev); |
| 2011 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2012 | i2c_del_adapter(&i2c_dev->adap); |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 2013 | pm_runtime_get_sync(i2c_dev->dev); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2014 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 2015 | pm_runtime_put_noidle(i2c_dev->dev); |
| 2016 | pm_runtime_disable(i2c_dev->dev); |
| 2017 | pm_runtime_set_suspended(i2c_dev->dev); |
| 2018 | pm_runtime_dont_use_autosuspend(i2c_dev->dev); |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2019 | |
Alain Volmat | 53aaaa5 | 2019-10-25 16:04:24 +0200 | [diff] [blame] | 2020 | if (i2c_dev->dma) { |
| 2021 | stm32_i2c_dma_free(i2c_dev->dma); |
| 2022 | i2c_dev->dma = NULL; |
| 2023 | } |
| 2024 | |
| 2025 | clk_disable_unprepare(i2c_dev->clk); |
| 2026 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2027 | return 0; |
| 2028 | } |
| 2029 | |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 2030 | #ifdef CONFIG_PM |
| 2031 | static int stm32f7_i2c_runtime_suspend(struct device *dev) |
| 2032 | { |
| 2033 | struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev); |
| 2034 | |
| 2035 | if (!stm32f7_i2c_is_slave_registered(i2c_dev)) |
| 2036 | clk_disable_unprepare(i2c_dev->clk); |
| 2037 | |
| 2038 | return 0; |
| 2039 | } |
| 2040 | |
| 2041 | static int stm32f7_i2c_runtime_resume(struct device *dev) |
| 2042 | { |
| 2043 | struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev); |
| 2044 | int ret; |
| 2045 | |
| 2046 | if (!stm32f7_i2c_is_slave_registered(i2c_dev)) { |
| 2047 | ret = clk_prepare_enable(i2c_dev->clk); |
| 2048 | if (ret) { |
| 2049 | dev_err(dev, "failed to prepare_enable clock\n"); |
| 2050 | return ret; |
| 2051 | } |
| 2052 | } |
| 2053 | |
| 2054 | return 0; |
| 2055 | } |
| 2056 | #endif |
| 2057 | |
| 2058 | static const struct dev_pm_ops stm32f7_i2c_pm_ops = { |
| 2059 | SET_RUNTIME_PM_OPS(stm32f7_i2c_runtime_suspend, |
| 2060 | stm32f7_i2c_runtime_resume, NULL) |
| 2061 | }; |
| 2062 | |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2063 | static const struct of_device_id stm32f7_i2c_match[] = { |
| 2064 | { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup}, |
| 2065 | {}, |
| 2066 | }; |
| 2067 | MODULE_DEVICE_TABLE(of, stm32f7_i2c_match); |
| 2068 | |
| 2069 | static struct platform_driver stm32f7_i2c_driver = { |
| 2070 | .driver = { |
| 2071 | .name = "stm32f7-i2c", |
| 2072 | .of_match_table = stm32f7_i2c_match, |
Pierre-Yves MORDRET | 4e7bca6 | 2018-11-27 15:35:31 +0100 | [diff] [blame] | 2073 | .pm = &stm32f7_i2c_pm_ops, |
Pierre-Yves MORDRET | aeb068c | 2017-09-14 16:28:37 +0200 | [diff] [blame] | 2074 | }, |
| 2075 | .probe = stm32f7_i2c_probe, |
| 2076 | .remove = stm32f7_i2c_remove, |
| 2077 | }; |
| 2078 | |
| 2079 | module_platform_driver(stm32f7_i2c_driver); |
| 2080 | |
| 2081 | MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>"); |
| 2082 | MODULE_DESCRIPTION("STMicroelectronics STM32F7 I2C driver"); |
| 2083 | MODULE_LICENSE("GPL v2"); |