arch/s390/pci/pci_mmio.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Access to PCI I/O memory from user space programs.
 *
 * Copyright IBM Corp. 2014
 * Author(s): Alexey Ishchuk <aishchuk@linux.vnet.ibm.com>
 */
#include <linux/kernel.h>
#include <linux/syscalls.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <asm/pci_io.h>
#include <asm/pci_debug.h>

static inline void zpci_err_mmio(u8 cc, u8 status, u64 offset)
{
	struct {
		u64 offset;
		u8 cc;
		u8 status;
	} data = {offset, cc, status};

	zpci_err_hex(&data, sizeof(data));
}

static inline int __pcistb_mio_inuser(
		void __iomem *ioaddr, const void __user *src,
		u64 len, u8 *status)
{
	int cc = -ENXIO;

	asm volatile (
		"       sacf 256\n"
		"0:     .insn   rsy,0xeb00000000d4,%[len],%[ioaddr],%[src]\n"
		"1:     ipm     %[cc]\n"
		"       srl     %[cc],28\n"
		"2:     sacf 768\n"
		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
		: [cc] "+d" (cc), [len] "+d" (len)
		: [ioaddr] "a" (ioaddr), [src] "Q" (*((u8 __force *)src))
		: "cc", "memory");
	*status = len >> 24 & 0xff;
	return cc;
}

static inline int __pcistg_mio_inuser(
		void __iomem *ioaddr, const void __user *src,
		u64 ulen, u8 *status)
{
	register u64 addr asm("2") = (u64 __force) ioaddr;
	register u64 len asm("3") = ulen;
	int cc = -ENXIO;
	u64 val = 0;
	u64 cnt = ulen;
	u8 tmp;

	/*
	 * copy 0 < @len <= 8 bytes from @src into the right most bytes of
	 * a register, then store it to PCI at @ioaddr while in secondary
	 * address space. pcistg then uses the user mappings.
	 */
	asm volatile (
		"       sacf    256\n"
		"0:     llgc    %[tmp],0(%[src])\n"
		"       sllg    %[val],%[val],8\n"
		"       aghi    %[src],1\n"
		"       ogr     %[val],%[tmp]\n"
		"       brctg   %[cnt],0b\n"
		"1:     .insn   rre,0xb9d40000,%[val],%[ioaddr]\n"
		"2:     ipm     %[cc]\n"
		"       srl     %[cc],28\n"
		"3:     sacf    768\n"
		EX_TABLE(0b, 3b) EX_TABLE(1b, 3b) EX_TABLE(2b, 3b)
		:
		[src] "+a" (src), [cnt] "+d" (cnt),
		[val] "+d" (val), [tmp] "=d" (tmp),
		[len] "+d" (len), [cc] "+d" (cc),
		[ioaddr] "+a" (addr)
		:: "cc", "memory");
	*status = len >> 24 & 0xff;

	/* did we read everything from user memory? */
	if (!cc && cnt != 0)
		cc = -EFAULT;

	return cc;
}

static inline int __memcpy_toio_inuser(void __iomem *dst,
				   const void __user *src, size_t n)
{
	int size, rc = 0;
	u8 status = 0;
	mm_segment_t old_fs;

	if (!src)
		return -EINVAL;

	old_fs = enable_sacf_uaccess();
	while (n > 0) {
		size = zpci_get_max_write_size((u64 __force) dst,
					       (u64 __force) src, n,
					       ZPCI_MAX_WRITE_SIZE);
		if (size > 8) /* main path */
			rc = __pcistb_mio_inuser(dst, src, size, &status);
		else
			rc = __pcistg_mio_inuser(dst, src, size, &status);
		if (rc)
			break;
		src += size;
		dst += size;
		n -= size;
	}
	disable_sacf_uaccess(old_fs);
	if (rc)
		zpci_err_mmio(rc, status, (__force u64) dst);
	return rc;
}

static long get_pfn(unsigned long user_addr, unsigned long access,
		    unsigned long *pfn)
{
	struct vm_area_struct *vma;
	long ret;

	down_read(&current->mm->mmap_sem);
	ret = -EINVAL;
	vma = find_vma(current->mm, user_addr);
	if (!vma)
		goto out;
	ret = -EACCES;
	if (!(vma->vm_flags & access))
		goto out;
	ret = follow_pfn(vma, user_addr, pfn);
out:
	up_read(&current->mm->mmap_sem);
	return ret;
}

SYSCALL_DEFINE3(s390_pci_mmio_write, unsigned long, mmio_addr,
		const void __user *, user_buffer, size_t, length)
{
	u8 local_buf[64];
	void __iomem *io_addr;
	void *buf;
	unsigned long pfn;
	long ret;

	if (!zpci_is_enabled())
		return -ENODEV;

	if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length)
		return -EINVAL;

	/*
	 * Only support read access to MIO capable devices on a MIO enabled
	 * system. Otherwise we would have to check for every address if it is
	 * a special ZPCI_ADDR and we would have to do a get_pfn() which we
	 * don't need for MIO capable devices.
	 */
	if (static_branch_likely(&have_mio)) {
		ret = __memcpy_toio_inuser((void  __iomem *) mmio_addr,
					user_buffer,
					length);
		return ret;
	}

	if (length > 64) {
		buf = kmalloc(length, GFP_KERNEL);
		if (!buf)
			return -ENOMEM;
	} else
		buf = local_buf;

	ret = get_pfn(mmio_addr, VM_WRITE, &pfn);
	if (ret)
		goto out;
	io_addr = (void __iomem *)((pfn << PAGE_SHIFT) |
			(mmio_addr & ~PAGE_MASK));

	ret = -EFAULT;
	if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE)
		goto out;

	if (copy_from_user(buf, user_buffer, length))
		goto out;

	ret = zpci_memcpy_toio(io_addr, buf, length);
out:
	if (buf != local_buf)
		kfree(buf);
	return ret;
}

static inline int __pcilg_mio_inuser(
		void __user *dst, const void __iomem *ioaddr,
		u64 ulen, u8 *status)
{
	register u64 addr asm("2") = (u64 __force) ioaddr;
	register u64 len asm("3") = ulen;
	u64 cnt = ulen;
	int shift = ulen * 8;
	int cc = -ENXIO;
	u64 val, tmp;

	/*
	 * read 0 < @len <= 8 bytes from the PCI memory mapped at @ioaddr (in
	 * user space) into a register using pcilg then store these bytes at
	 * user address @dst
	 */
	asm volatile (
		"       sacf    256\n"
		"0:     .insn   rre,0xb9d60000,%[val],%[ioaddr]\n"
		"1:     ipm     %[cc]\n"
		"       srl     %[cc],28\n"
		"       ltr     %[cc],%[cc]\n"
		"       jne     4f\n"
		"2:     ahi     %[shift],-8\n"
		"       srlg    %[tmp],%[val],0(%[shift])\n"
		"3:     stc     %[tmp],0(%[dst])\n"
		"       aghi    %[dst],1\n"
		"       brctg   %[cnt],2b\n"
		"4:     sacf    768\n"
		EX_TABLE(0b, 4b) EX_TABLE(1b, 4b) EX_TABLE(3b, 4b)
		:
		[cc] "+d" (cc), [val] "=d" (val), [len] "+d" (len),
		[dst] "+a" (dst), [cnt] "+d" (cnt), [tmp] "=d" (tmp),
		[shift] "+d" (shift)
		:
		[ioaddr] "a" (addr)
		: "cc", "memory");

	/* did we write everything to the user space buffer? */
	if (!cc && cnt != 0)
		cc = -EFAULT;

	*status = len >> 24 & 0xff;
	return cc;
}

static inline int __memcpy_fromio_inuser(void __user *dst,
				     const void __iomem *src,
				     unsigned long n)
{
	int size, rc = 0;
	u8 status;
	mm_segment_t old_fs;

	old_fs = enable_sacf_uaccess();
	while (n > 0) {
		size = zpci_get_max_write_size((u64 __force) src,
					       (u64 __force) dst, n,
					       ZPCI_MAX_READ_SIZE);
		rc = __pcilg_mio_inuser(dst, src, size, &status);
		if (rc)
			break;
		src += size;
		dst += size;
		n -= size;
	}
	disable_sacf_uaccess(old_fs);
	if (rc)
		zpci_err_mmio(rc, status, (__force u64) dst);
	return rc;
}

SYSCALL_DEFINE3(s390_pci_mmio_read, unsigned long, mmio_addr,
		void __user *, user_buffer, size_t, length)
{
	u8 local_buf[64];
	void __iomem *io_addr;
	void *buf;
	unsigned long pfn;
	long ret;

	if (!zpci_is_enabled())
		return -ENODEV;

	if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length)
		return -EINVAL;

	/*
	 * Only support write access to MIO capable devices on a MIO enabled
	 * system. Otherwise we would have to check for every address if it is
	 * a special ZPCI_ADDR and we would have to do a get_pfn() which we
	 * don't need for MIO capable devices.
	 */
	if (static_branch_likely(&have_mio)) {
		ret = __memcpy_fromio_inuser(
				user_buffer, (const void __iomem *)mmio_addr,
				length);
		return ret;
	}

	if (length > 64) {
		buf = kmalloc(length, GFP_KERNEL);
		if (!buf)
			return -ENOMEM;
	} else {
		buf = local_buf;
	}

	ret = get_pfn(mmio_addr, VM_READ, &pfn);
	if (ret)
		goto out;
	io_addr = (void __iomem *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK));

	if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE) {
		ret = -EFAULT;
		goto out;
	}
	ret = zpci_memcpy_fromio(buf, io_addr, length);
	if (ret)
		goto out;
	if (copy_to_user(user_buffer, buf, length))
		ret = -EFAULT;

out:
	if (buf != local_buf)
		kfree(buf);
	return ret;
}