Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd. |
| 3 | * Author: Lin Huang <hl@rock-chips.com> |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify it |
| 6 | * under the terms and conditions of the GNU General Public License, |
| 7 | * version 2, as published by the Free Software Foundation. |
| 8 | * |
| 9 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 12 | * more details. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/arm-smccc.h> |
| 16 | #include <linux/clk.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/devfreq.h> |
| 19 | #include <linux/devfreq-event.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/module.h> |
| 22 | #include <linux/of.h> |
| 23 | #include <linux/platform_device.h> |
| 24 | #include <linux/pm_opp.h> |
| 25 | #include <linux/regulator/consumer.h> |
| 26 | #include <linux/rwsem.h> |
| 27 | #include <linux/suspend.h> |
| 28 | |
| 29 | #include <soc/rockchip/rockchip_sip.h> |
| 30 | |
| 31 | struct dram_timing { |
| 32 | unsigned int ddr3_speed_bin; |
| 33 | unsigned int pd_idle; |
| 34 | unsigned int sr_idle; |
| 35 | unsigned int sr_mc_gate_idle; |
| 36 | unsigned int srpd_lite_idle; |
| 37 | unsigned int standby_idle; |
| 38 | unsigned int auto_pd_dis_freq; |
| 39 | unsigned int dram_dll_dis_freq; |
| 40 | unsigned int phy_dll_dis_freq; |
| 41 | unsigned int ddr3_odt_dis_freq; |
| 42 | unsigned int ddr3_drv; |
| 43 | unsigned int ddr3_odt; |
| 44 | unsigned int phy_ddr3_ca_drv; |
| 45 | unsigned int phy_ddr3_dq_drv; |
| 46 | unsigned int phy_ddr3_odt; |
| 47 | unsigned int lpddr3_odt_dis_freq; |
| 48 | unsigned int lpddr3_drv; |
| 49 | unsigned int lpddr3_odt; |
| 50 | unsigned int phy_lpddr3_ca_drv; |
| 51 | unsigned int phy_lpddr3_dq_drv; |
| 52 | unsigned int phy_lpddr3_odt; |
| 53 | unsigned int lpddr4_odt_dis_freq; |
| 54 | unsigned int lpddr4_drv; |
| 55 | unsigned int lpddr4_dq_odt; |
| 56 | unsigned int lpddr4_ca_odt; |
| 57 | unsigned int phy_lpddr4_ca_drv; |
| 58 | unsigned int phy_lpddr4_ck_cs_drv; |
| 59 | unsigned int phy_lpddr4_dq_drv; |
| 60 | unsigned int phy_lpddr4_odt; |
| 61 | }; |
| 62 | |
| 63 | struct rk3399_dmcfreq { |
| 64 | struct device *dev; |
| 65 | struct devfreq *devfreq; |
| 66 | struct devfreq_simple_ondemand_data ondemand_data; |
| 67 | struct clk *dmc_clk; |
| 68 | struct devfreq_event_dev *edev; |
| 69 | struct mutex lock; |
| 70 | struct dram_timing timing; |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 71 | struct regulator *vdd_center; |
| 72 | unsigned long rate, target_rate; |
| 73 | unsigned long volt, target_volt; |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 74 | }; |
| 75 | |
| 76 | static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq, |
| 77 | u32 flags) |
| 78 | { |
| 79 | struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); |
| 80 | struct dev_pm_opp *opp; |
| 81 | unsigned long old_clk_rate = dmcfreq->rate; |
| 82 | unsigned long target_volt, target_rate; |
| 83 | int err; |
| 84 | |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 85 | opp = devfreq_recommended_opp(dev, freq, flags); |
Viresh Kumar | 8a31d9d9 | 2017-01-23 10:11:47 +0530 | [diff] [blame] | 86 | if (IS_ERR(opp)) |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 87 | return PTR_ERR(opp); |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 88 | |
| 89 | target_rate = dev_pm_opp_get_freq(opp); |
| 90 | target_volt = dev_pm_opp_get_voltage(opp); |
Viresh Kumar | 8a31d9d9 | 2017-01-23 10:11:47 +0530 | [diff] [blame] | 91 | dev_pm_opp_put(opp); |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 92 | |
| 93 | if (dmcfreq->rate == target_rate) |
| 94 | return 0; |
| 95 | |
| 96 | mutex_lock(&dmcfreq->lock); |
| 97 | |
| 98 | /* |
| 99 | * If frequency scaling from low to high, adjust voltage first. |
| 100 | * If frequency scaling from high to low, adjust frequency first. |
| 101 | */ |
| 102 | if (old_clk_rate < target_rate) { |
| 103 | err = regulator_set_voltage(dmcfreq->vdd_center, target_volt, |
| 104 | target_volt); |
| 105 | if (err) { |
| 106 | dev_err(dev, "Cannot to set voltage %lu uV\n", |
| 107 | target_volt); |
| 108 | goto out; |
| 109 | } |
| 110 | } |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 111 | |
| 112 | err = clk_set_rate(dmcfreq->dmc_clk, target_rate); |
| 113 | if (err) { |
| 114 | dev_err(dev, "Cannot to set frequency %lu (%d)\n", |
| 115 | target_rate, err); |
| 116 | regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt, |
| 117 | dmcfreq->volt); |
| 118 | goto out; |
| 119 | } |
| 120 | |
| 121 | /* |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 122 | * Check the dpll rate, |
| 123 | * There only two result we will get, |
| 124 | * 1. Ddr frequency scaling fail, we still get the old rate. |
| 125 | * 2. Ddr frequency scaling sucessful, we get the rate we set. |
| 126 | */ |
| 127 | dmcfreq->rate = clk_get_rate(dmcfreq->dmc_clk); |
| 128 | |
| 129 | /* If get the incorrect rate, set voltage to old value. */ |
| 130 | if (dmcfreq->rate != target_rate) { |
| 131 | dev_err(dev, "Get wrong ddr frequency, Request frequency %lu,\ |
| 132 | Current frequency %lu\n", target_rate, dmcfreq->rate); |
| 133 | regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt, |
| 134 | dmcfreq->volt); |
| 135 | goto out; |
| 136 | } else if (old_clk_rate > target_rate) |
| 137 | err = regulator_set_voltage(dmcfreq->vdd_center, target_volt, |
| 138 | target_volt); |
| 139 | if (err) |
| 140 | dev_err(dev, "Cannot to set vol %lu uV\n", target_volt); |
| 141 | |
Viresh Kumar | e37d350 | 2016-12-05 08:53:52 +0530 | [diff] [blame] | 142 | dmcfreq->rate = target_rate; |
| 143 | dmcfreq->volt = target_volt; |
| 144 | |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 145 | out: |
| 146 | mutex_unlock(&dmcfreq->lock); |
| 147 | return err; |
| 148 | } |
| 149 | |
| 150 | static int rk3399_dmcfreq_get_dev_status(struct device *dev, |
| 151 | struct devfreq_dev_status *stat) |
| 152 | { |
| 153 | struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); |
| 154 | struct devfreq_event_data edata; |
| 155 | int ret = 0; |
| 156 | |
| 157 | ret = devfreq_event_get_event(dmcfreq->edev, &edata); |
| 158 | if (ret < 0) |
| 159 | return ret; |
| 160 | |
| 161 | stat->current_frequency = dmcfreq->rate; |
| 162 | stat->busy_time = edata.load_count; |
| 163 | stat->total_time = edata.total_count; |
| 164 | |
| 165 | return ret; |
| 166 | } |
| 167 | |
| 168 | static int rk3399_dmcfreq_get_cur_freq(struct device *dev, unsigned long *freq) |
| 169 | { |
| 170 | struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); |
| 171 | |
| 172 | *freq = dmcfreq->rate; |
| 173 | |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | static struct devfreq_dev_profile rk3399_devfreq_dmc_profile = { |
| 178 | .polling_ms = 200, |
| 179 | .target = rk3399_dmcfreq_target, |
| 180 | .get_dev_status = rk3399_dmcfreq_get_dev_status, |
| 181 | .get_cur_freq = rk3399_dmcfreq_get_cur_freq, |
| 182 | }; |
| 183 | |
| 184 | static __maybe_unused int rk3399_dmcfreq_suspend(struct device *dev) |
| 185 | { |
| 186 | struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); |
| 187 | int ret = 0; |
| 188 | |
| 189 | ret = devfreq_event_disable_edev(dmcfreq->edev); |
| 190 | if (ret < 0) { |
| 191 | dev_err(dev, "failed to disable the devfreq-event devices\n"); |
| 192 | return ret; |
| 193 | } |
| 194 | |
| 195 | ret = devfreq_suspend_device(dmcfreq->devfreq); |
| 196 | if (ret < 0) { |
| 197 | dev_err(dev, "failed to suspend the devfreq devices\n"); |
| 198 | return ret; |
| 199 | } |
| 200 | |
| 201 | return 0; |
| 202 | } |
| 203 | |
| 204 | static __maybe_unused int rk3399_dmcfreq_resume(struct device *dev) |
| 205 | { |
| 206 | struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); |
| 207 | int ret = 0; |
| 208 | |
| 209 | ret = devfreq_event_enable_edev(dmcfreq->edev); |
| 210 | if (ret < 0) { |
| 211 | dev_err(dev, "failed to enable the devfreq-event devices\n"); |
| 212 | return ret; |
| 213 | } |
| 214 | |
| 215 | ret = devfreq_resume_device(dmcfreq->devfreq); |
| 216 | if (ret < 0) { |
| 217 | dev_err(dev, "failed to resume the devfreq devices\n"); |
| 218 | return ret; |
| 219 | } |
| 220 | return ret; |
| 221 | } |
| 222 | |
| 223 | static SIMPLE_DEV_PM_OPS(rk3399_dmcfreq_pm, rk3399_dmcfreq_suspend, |
| 224 | rk3399_dmcfreq_resume); |
| 225 | |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 226 | static int of_get_ddr_timings(struct dram_timing *timing, |
| 227 | struct device_node *np) |
| 228 | { |
| 229 | int ret = 0; |
| 230 | |
| 231 | ret = of_property_read_u32(np, "rockchip,ddr3_speed_bin", |
| 232 | &timing->ddr3_speed_bin); |
| 233 | ret |= of_property_read_u32(np, "rockchip,pd_idle", |
| 234 | &timing->pd_idle); |
| 235 | ret |= of_property_read_u32(np, "rockchip,sr_idle", |
| 236 | &timing->sr_idle); |
| 237 | ret |= of_property_read_u32(np, "rockchip,sr_mc_gate_idle", |
| 238 | &timing->sr_mc_gate_idle); |
| 239 | ret |= of_property_read_u32(np, "rockchip,srpd_lite_idle", |
| 240 | &timing->srpd_lite_idle); |
| 241 | ret |= of_property_read_u32(np, "rockchip,standby_idle", |
| 242 | &timing->standby_idle); |
| 243 | ret |= of_property_read_u32(np, "rockchip,auto_pd_dis_freq", |
| 244 | &timing->auto_pd_dis_freq); |
| 245 | ret |= of_property_read_u32(np, "rockchip,dram_dll_dis_freq", |
| 246 | &timing->dram_dll_dis_freq); |
| 247 | ret |= of_property_read_u32(np, "rockchip,phy_dll_dis_freq", |
| 248 | &timing->phy_dll_dis_freq); |
| 249 | ret |= of_property_read_u32(np, "rockchip,ddr3_odt_dis_freq", |
| 250 | &timing->ddr3_odt_dis_freq); |
| 251 | ret |= of_property_read_u32(np, "rockchip,ddr3_drv", |
| 252 | &timing->ddr3_drv); |
| 253 | ret |= of_property_read_u32(np, "rockchip,ddr3_odt", |
| 254 | &timing->ddr3_odt); |
| 255 | ret |= of_property_read_u32(np, "rockchip,phy_ddr3_ca_drv", |
| 256 | &timing->phy_ddr3_ca_drv); |
| 257 | ret |= of_property_read_u32(np, "rockchip,phy_ddr3_dq_drv", |
| 258 | &timing->phy_ddr3_dq_drv); |
| 259 | ret |= of_property_read_u32(np, "rockchip,phy_ddr3_odt", |
| 260 | &timing->phy_ddr3_odt); |
| 261 | ret |= of_property_read_u32(np, "rockchip,lpddr3_odt_dis_freq", |
| 262 | &timing->lpddr3_odt_dis_freq); |
| 263 | ret |= of_property_read_u32(np, "rockchip,lpddr3_drv", |
| 264 | &timing->lpddr3_drv); |
| 265 | ret |= of_property_read_u32(np, "rockchip,lpddr3_odt", |
| 266 | &timing->lpddr3_odt); |
| 267 | ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_ca_drv", |
| 268 | &timing->phy_lpddr3_ca_drv); |
| 269 | ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_dq_drv", |
| 270 | &timing->phy_lpddr3_dq_drv); |
| 271 | ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_odt", |
| 272 | &timing->phy_lpddr3_odt); |
| 273 | ret |= of_property_read_u32(np, "rockchip,lpddr4_odt_dis_freq", |
| 274 | &timing->lpddr4_odt_dis_freq); |
| 275 | ret |= of_property_read_u32(np, "rockchip,lpddr4_drv", |
| 276 | &timing->lpddr4_drv); |
| 277 | ret |= of_property_read_u32(np, "rockchip,lpddr4_dq_odt", |
| 278 | &timing->lpddr4_dq_odt); |
| 279 | ret |= of_property_read_u32(np, "rockchip,lpddr4_ca_odt", |
| 280 | &timing->lpddr4_ca_odt); |
| 281 | ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_ca_drv", |
| 282 | &timing->phy_lpddr4_ca_drv); |
| 283 | ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_ck_cs_drv", |
| 284 | &timing->phy_lpddr4_ck_cs_drv); |
| 285 | ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_dq_drv", |
| 286 | &timing->phy_lpddr4_dq_drv); |
| 287 | ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_odt", |
| 288 | &timing->phy_lpddr4_odt); |
| 289 | |
| 290 | return ret; |
| 291 | } |
| 292 | |
| 293 | static int rk3399_dmcfreq_probe(struct platform_device *pdev) |
| 294 | { |
| 295 | struct arm_smccc_res res; |
| 296 | struct device *dev = &pdev->dev; |
| 297 | struct device_node *np = pdev->dev.of_node; |
| 298 | struct rk3399_dmcfreq *data; |
Enric Balletbo i Serra | 90dd72e | 2018-05-09 14:57:45 +0200 | [diff] [blame^] | 299 | int ret, index, size; |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 300 | uint32_t *timing; |
| 301 | struct dev_pm_opp *opp; |
| 302 | |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 303 | data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL); |
| 304 | if (!data) |
| 305 | return -ENOMEM; |
| 306 | |
| 307 | mutex_init(&data->lock); |
| 308 | |
| 309 | data->vdd_center = devm_regulator_get(dev, "center"); |
| 310 | if (IS_ERR(data->vdd_center)) { |
| 311 | dev_err(dev, "Cannot get the regulator \"center\"\n"); |
| 312 | return PTR_ERR(data->vdd_center); |
| 313 | } |
| 314 | |
| 315 | data->dmc_clk = devm_clk_get(dev, "dmc_clk"); |
| 316 | if (IS_ERR(data->dmc_clk)) { |
| 317 | dev_err(dev, "Cannot get the clk dmc_clk\n"); |
| 318 | return PTR_ERR(data->dmc_clk); |
| 319 | }; |
| 320 | |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 321 | data->edev = devfreq_event_get_edev_by_phandle(dev, 0); |
| 322 | if (IS_ERR(data->edev)) |
| 323 | return -EPROBE_DEFER; |
| 324 | |
| 325 | ret = devfreq_event_enable_edev(data->edev); |
| 326 | if (ret < 0) { |
| 327 | dev_err(dev, "failed to enable devfreq-event devices\n"); |
| 328 | return ret; |
| 329 | } |
| 330 | |
| 331 | /* |
| 332 | * Get dram timing and pass it to arm trust firmware, |
| 333 | * the dram drvier in arm trust firmware will get these |
| 334 | * timing and to do dram initial. |
| 335 | */ |
| 336 | if (!of_get_ddr_timings(&data->timing, np)) { |
| 337 | timing = &data->timing.ddr3_speed_bin; |
| 338 | size = sizeof(struct dram_timing) / 4; |
| 339 | for (index = 0; index < size; index++) { |
| 340 | arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, *timing++, index, |
| 341 | ROCKCHIP_SIP_CONFIG_DRAM_SET_PARAM, |
| 342 | 0, 0, 0, 0, &res); |
| 343 | if (res.a0) { |
| 344 | dev_err(dev, "Failed to set dram param: %ld\n", |
| 345 | res.a0); |
| 346 | return -EINVAL; |
| 347 | } |
| 348 | } |
| 349 | } |
| 350 | |
| 351 | arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0, |
| 352 | ROCKCHIP_SIP_CONFIG_DRAM_INIT, |
| 353 | 0, 0, 0, 0, &res); |
| 354 | |
| 355 | /* |
| 356 | * We add a devfreq driver to our parent since it has a device tree node |
| 357 | * with operating points. |
| 358 | */ |
| 359 | if (dev_pm_opp_of_add_table(dev)) { |
| 360 | dev_err(dev, "Invalid operating-points in device tree.\n"); |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 361 | return -EINVAL; |
| 362 | } |
| 363 | |
| 364 | of_property_read_u32(np, "upthreshold", |
| 365 | &data->ondemand_data.upthreshold); |
| 366 | of_property_read_u32(np, "downdifferential", |
| 367 | &data->ondemand_data.downdifferential); |
| 368 | |
| 369 | data->rate = clk_get_rate(data->dmc_clk); |
| 370 | |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 371 | opp = devfreq_recommended_opp(dev, &data->rate, 0); |
Viresh Kumar | 8a31d9d9 | 2017-01-23 10:11:47 +0530 | [diff] [blame] | 372 | if (IS_ERR(opp)) |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 373 | return PTR_ERR(opp); |
Viresh Kumar | 8a31d9d9 | 2017-01-23 10:11:47 +0530 | [diff] [blame] | 374 | |
Viresh Kumar | e37d350 | 2016-12-05 08:53:52 +0530 | [diff] [blame] | 375 | data->rate = dev_pm_opp_get_freq(opp); |
| 376 | data->volt = dev_pm_opp_get_voltage(opp); |
Viresh Kumar | 8a31d9d9 | 2017-01-23 10:11:47 +0530 | [diff] [blame] | 377 | dev_pm_opp_put(opp); |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 378 | |
| 379 | rk3399_devfreq_dmc_profile.initial_freq = data->rate; |
| 380 | |
Chanwoo Choi | 927b75a | 2016-11-08 18:13:27 +0900 | [diff] [blame] | 381 | data->devfreq = devm_devfreq_add_device(dev, |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 382 | &rk3399_devfreq_dmc_profile, |
Chanwoo Choi | aa7c352 | 2017-10-23 10:32:12 +0900 | [diff] [blame] | 383 | DEVFREQ_GOV_SIMPLE_ONDEMAND, |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 384 | &data->ondemand_data); |
| 385 | if (IS_ERR(data->devfreq)) |
| 386 | return PTR_ERR(data->devfreq); |
| 387 | devm_devfreq_register_opp_notifier(dev, data->devfreq); |
| 388 | |
| 389 | data->dev = dev; |
| 390 | platform_set_drvdata(pdev, data); |
| 391 | |
| 392 | return 0; |
| 393 | } |
| 394 | |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 395 | static const struct of_device_id rk3399dmc_devfreq_of_match[] = { |
| 396 | { .compatible = "rockchip,rk3399-dmc" }, |
| 397 | { }, |
| 398 | }; |
Javier Martinez Canillas | 2f3f1a2 | 2016-10-19 18:06:24 -0300 | [diff] [blame] | 399 | MODULE_DEVICE_TABLE(of, rk3399dmc_devfreq_of_match); |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 400 | |
| 401 | static struct platform_driver rk3399_dmcfreq_driver = { |
| 402 | .probe = rk3399_dmcfreq_probe, |
Lin Huang | 5a893e3 | 2016-09-05 13:06:10 +0800 | [diff] [blame] | 403 | .driver = { |
| 404 | .name = "rk3399-dmc-freq", |
| 405 | .pm = &rk3399_dmcfreq_pm, |
| 406 | .of_match_table = rk3399dmc_devfreq_of_match, |
| 407 | }, |
| 408 | }; |
| 409 | module_platform_driver(rk3399_dmcfreq_driver); |
| 410 | |
| 411 | MODULE_LICENSE("GPL v2"); |
| 412 | MODULE_AUTHOR("Lin Huang <hl@rock-chips.com>"); |
| 413 | MODULE_DESCRIPTION("RK3399 dmcfreq driver with devfreq framework"); |