Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2005-2011 Atheros Communications Inc. |
| 3 | * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. |
| 4 | * |
| 5 | * Permission to use, copy, modify, and/or distribute this software for any |
| 6 | * purpose with or without fee is hereby granted, provided that the above |
| 7 | * copyright notice and this permission notice appear in all copies. |
| 8 | * |
| 9 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 10 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 11 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 12 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 13 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 14 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 15 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/pci.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/spinlock.h> |
| 22 | |
| 23 | #include "core.h" |
| 24 | #include "debug.h" |
| 25 | |
| 26 | #include "targaddrs.h" |
| 27 | #include "bmi.h" |
| 28 | |
| 29 | #include "hif.h" |
| 30 | #include "htc.h" |
| 31 | |
| 32 | #include "ce.h" |
| 33 | #include "pci.h" |
| 34 | |
| 35 | unsigned int ath10k_target_ps; |
| 36 | module_param(ath10k_target_ps, uint, 0644); |
| 37 | MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option"); |
| 38 | |
| 39 | #define QCA988X_1_0_DEVICE_ID (0xabcd) |
| 40 | #define QCA988X_2_0_DEVICE_ID (0x003c) |
| 41 | |
| 42 | static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = { |
| 43 | { PCI_VDEVICE(ATHEROS, QCA988X_1_0_DEVICE_ID) }, /* PCI-E QCA988X V1 */ |
| 44 | { PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */ |
| 45 | {0} |
| 46 | }; |
| 47 | |
| 48 | static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address, |
| 49 | u32 *data); |
| 50 | |
| 51 | static void ath10k_pci_process_ce(struct ath10k *ar); |
| 52 | static int ath10k_pci_post_rx(struct ath10k *ar); |
| 53 | static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info, |
| 54 | int num); |
| 55 | static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info); |
| 56 | static void ath10k_pci_stop_ce(struct ath10k *ar); |
| 57 | |
| 58 | static const struct ce_attr host_ce_config_wlan[] = { |
| 59 | /* host->target HTC control and raw streams */ |
| 60 | { /* CE0 */ CE_ATTR_FLAGS, 0, 16, 256, 0, NULL,}, |
| 61 | /* could be moved to share CE3 */ |
| 62 | /* target->host HTT + HTC control */ |
| 63 | { /* CE1 */ CE_ATTR_FLAGS, 0, 0, 512, 512, NULL,}, |
| 64 | /* target->host WMI */ |
| 65 | { /* CE2 */ CE_ATTR_FLAGS, 0, 0, 2048, 32, NULL,}, |
| 66 | /* host->target WMI */ |
| 67 | { /* CE3 */ CE_ATTR_FLAGS, 0, 32, 2048, 0, NULL,}, |
| 68 | /* host->target HTT */ |
| 69 | { /* CE4 */ CE_ATTR_FLAGS | CE_ATTR_DIS_INTR, 0, |
| 70 | CE_HTT_H2T_MSG_SRC_NENTRIES, 256, 0, NULL,}, |
| 71 | /* unused */ |
| 72 | { /* CE5 */ CE_ATTR_FLAGS, 0, 0, 0, 0, NULL,}, |
| 73 | /* Target autonomous hif_memcpy */ |
| 74 | { /* CE6 */ CE_ATTR_FLAGS, 0, 0, 0, 0, NULL,}, |
| 75 | /* ce_diag, the Diagnostic Window */ |
| 76 | { /* CE7 */ CE_ATTR_FLAGS, 0, 2, DIAG_TRANSFER_LIMIT, 2, NULL,}, |
| 77 | }; |
| 78 | |
| 79 | /* Target firmware's Copy Engine configuration. */ |
| 80 | static const struct ce_pipe_config target_ce_config_wlan[] = { |
| 81 | /* host->target HTC control and raw streams */ |
| 82 | { /* CE0 */ 0, PIPEDIR_OUT, 32, 256, CE_ATTR_FLAGS, 0,}, |
| 83 | /* target->host HTT + HTC control */ |
| 84 | { /* CE1 */ 1, PIPEDIR_IN, 32, 512, CE_ATTR_FLAGS, 0,}, |
| 85 | /* target->host WMI */ |
| 86 | { /* CE2 */ 2, PIPEDIR_IN, 32, 2048, CE_ATTR_FLAGS, 0,}, |
| 87 | /* host->target WMI */ |
| 88 | { /* CE3 */ 3, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,}, |
| 89 | /* host->target HTT */ |
| 90 | { /* CE4 */ 4, PIPEDIR_OUT, 256, 256, CE_ATTR_FLAGS, 0,}, |
| 91 | /* NB: 50% of src nentries, since tx has 2 frags */ |
| 92 | /* unused */ |
| 93 | { /* CE5 */ 5, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,}, |
| 94 | /* Reserved for target autonomous hif_memcpy */ |
| 95 | { /* CE6 */ 6, PIPEDIR_INOUT, 32, 4096, CE_ATTR_FLAGS, 0,}, |
| 96 | /* CE7 used only by Host */ |
| 97 | }; |
| 98 | |
| 99 | /* |
| 100 | * Diagnostic read/write access is provided for startup/config/debug usage. |
| 101 | * Caller must guarantee proper alignment, when applicable, and single user |
| 102 | * at any moment. |
| 103 | */ |
| 104 | static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data, |
| 105 | int nbytes) |
| 106 | { |
| 107 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 108 | int ret = 0; |
| 109 | u32 buf; |
| 110 | unsigned int completed_nbytes, orig_nbytes, remaining_bytes; |
| 111 | unsigned int id; |
| 112 | unsigned int flags; |
| 113 | struct ce_state *ce_diag; |
| 114 | /* Host buffer address in CE space */ |
| 115 | u32 ce_data; |
| 116 | dma_addr_t ce_data_base = 0; |
| 117 | void *data_buf = NULL; |
| 118 | int i; |
| 119 | |
| 120 | /* |
| 121 | * This code cannot handle reads to non-memory space. Redirect to the |
| 122 | * register read fn but preserve the multi word read capability of |
| 123 | * this fn |
| 124 | */ |
| 125 | if (address < DRAM_BASE_ADDRESS) { |
| 126 | if (!IS_ALIGNED(address, 4) || |
| 127 | !IS_ALIGNED((unsigned long)data, 4)) |
| 128 | return -EIO; |
| 129 | |
| 130 | while ((nbytes >= 4) && ((ret = ath10k_pci_diag_read_access( |
| 131 | ar, address, (u32 *)data)) == 0)) { |
| 132 | nbytes -= sizeof(u32); |
| 133 | address += sizeof(u32); |
| 134 | data += sizeof(u32); |
| 135 | } |
| 136 | return ret; |
| 137 | } |
| 138 | |
| 139 | ce_diag = ar_pci->ce_diag; |
| 140 | |
| 141 | /* |
| 142 | * Allocate a temporary bounce buffer to hold caller's data |
| 143 | * to be DMA'ed from Target. This guarantees |
| 144 | * 1) 4-byte alignment |
| 145 | * 2) Buffer in DMA-able space |
| 146 | */ |
| 147 | orig_nbytes = nbytes; |
| 148 | data_buf = (unsigned char *)pci_alloc_consistent(ar_pci->pdev, |
| 149 | orig_nbytes, |
| 150 | &ce_data_base); |
| 151 | |
| 152 | if (!data_buf) { |
| 153 | ret = -ENOMEM; |
| 154 | goto done; |
| 155 | } |
| 156 | memset(data_buf, 0, orig_nbytes); |
| 157 | |
| 158 | remaining_bytes = orig_nbytes; |
| 159 | ce_data = ce_data_base; |
| 160 | while (remaining_bytes) { |
| 161 | nbytes = min_t(unsigned int, remaining_bytes, |
| 162 | DIAG_TRANSFER_LIMIT); |
| 163 | |
| 164 | ret = ath10k_ce_recv_buf_enqueue(ce_diag, NULL, ce_data); |
| 165 | if (ret != 0) |
| 166 | goto done; |
| 167 | |
| 168 | /* Request CE to send from Target(!) address to Host buffer */ |
| 169 | /* |
| 170 | * The address supplied by the caller is in the |
| 171 | * Target CPU virtual address space. |
| 172 | * |
| 173 | * In order to use this address with the diagnostic CE, |
| 174 | * convert it from Target CPU virtual address space |
| 175 | * to CE address space |
| 176 | */ |
| 177 | ath10k_pci_wake(ar); |
| 178 | address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem, |
| 179 | address); |
| 180 | ath10k_pci_sleep(ar); |
| 181 | |
| 182 | ret = ath10k_ce_send(ce_diag, NULL, (u32)address, nbytes, 0, |
| 183 | 0); |
| 184 | if (ret) |
| 185 | goto done; |
| 186 | |
| 187 | i = 0; |
| 188 | while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf, |
| 189 | &completed_nbytes, |
| 190 | &id) != 0) { |
| 191 | mdelay(1); |
| 192 | if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| 193 | ret = -EBUSY; |
| 194 | goto done; |
| 195 | } |
| 196 | } |
| 197 | |
| 198 | if (nbytes != completed_nbytes) { |
| 199 | ret = -EIO; |
| 200 | goto done; |
| 201 | } |
| 202 | |
| 203 | if (buf != (u32) address) { |
| 204 | ret = -EIO; |
| 205 | goto done; |
| 206 | } |
| 207 | |
| 208 | i = 0; |
| 209 | while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf, |
| 210 | &completed_nbytes, |
| 211 | &id, &flags) != 0) { |
| 212 | mdelay(1); |
| 213 | |
| 214 | if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| 215 | ret = -EBUSY; |
| 216 | goto done; |
| 217 | } |
| 218 | } |
| 219 | |
| 220 | if (nbytes != completed_nbytes) { |
| 221 | ret = -EIO; |
| 222 | goto done; |
| 223 | } |
| 224 | |
| 225 | if (buf != ce_data) { |
| 226 | ret = -EIO; |
| 227 | goto done; |
| 228 | } |
| 229 | |
| 230 | remaining_bytes -= nbytes; |
| 231 | address += nbytes; |
| 232 | ce_data += nbytes; |
| 233 | } |
| 234 | |
| 235 | done: |
| 236 | if (ret == 0) { |
| 237 | /* Copy data from allocated DMA buf to caller's buf */ |
| 238 | WARN_ON_ONCE(orig_nbytes & 3); |
| 239 | for (i = 0; i < orig_nbytes / sizeof(__le32); i++) { |
| 240 | ((u32 *)data)[i] = |
| 241 | __le32_to_cpu(((__le32 *)data_buf)[i]); |
| 242 | } |
| 243 | } else |
| 244 | ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", |
| 245 | __func__, address); |
| 246 | |
| 247 | if (data_buf) |
| 248 | pci_free_consistent(ar_pci->pdev, orig_nbytes, |
| 249 | data_buf, ce_data_base); |
| 250 | |
| 251 | return ret; |
| 252 | } |
| 253 | |
| 254 | /* Read 4-byte aligned data from Target memory or register */ |
| 255 | static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address, |
| 256 | u32 *data) |
| 257 | { |
| 258 | /* Assume range doesn't cross this boundary */ |
| 259 | if (address >= DRAM_BASE_ADDRESS) |
| 260 | return ath10k_pci_diag_read_mem(ar, address, data, sizeof(u32)); |
| 261 | |
| 262 | ath10k_pci_wake(ar); |
| 263 | *data = ath10k_pci_read32(ar, address); |
| 264 | ath10k_pci_sleep(ar); |
| 265 | return 0; |
| 266 | } |
| 267 | |
| 268 | static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, |
| 269 | const void *data, int nbytes) |
| 270 | { |
| 271 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 272 | int ret = 0; |
| 273 | u32 buf; |
| 274 | unsigned int completed_nbytes, orig_nbytes, remaining_bytes; |
| 275 | unsigned int id; |
| 276 | unsigned int flags; |
| 277 | struct ce_state *ce_diag; |
| 278 | void *data_buf = NULL; |
| 279 | u32 ce_data; /* Host buffer address in CE space */ |
| 280 | dma_addr_t ce_data_base = 0; |
| 281 | int i; |
| 282 | |
| 283 | ce_diag = ar_pci->ce_diag; |
| 284 | |
| 285 | /* |
| 286 | * Allocate a temporary bounce buffer to hold caller's data |
| 287 | * to be DMA'ed to Target. This guarantees |
| 288 | * 1) 4-byte alignment |
| 289 | * 2) Buffer in DMA-able space |
| 290 | */ |
| 291 | orig_nbytes = nbytes; |
| 292 | data_buf = (unsigned char *)pci_alloc_consistent(ar_pci->pdev, |
| 293 | orig_nbytes, |
| 294 | &ce_data_base); |
| 295 | if (!data_buf) { |
| 296 | ret = -ENOMEM; |
| 297 | goto done; |
| 298 | } |
| 299 | |
| 300 | /* Copy caller's data to allocated DMA buf */ |
| 301 | WARN_ON_ONCE(orig_nbytes & 3); |
| 302 | for (i = 0; i < orig_nbytes / sizeof(__le32); i++) |
| 303 | ((__le32 *)data_buf)[i] = __cpu_to_le32(((u32 *)data)[i]); |
| 304 | |
| 305 | /* |
| 306 | * The address supplied by the caller is in the |
| 307 | * Target CPU virtual address space. |
| 308 | * |
| 309 | * In order to use this address with the diagnostic CE, |
| 310 | * convert it from |
| 311 | * Target CPU virtual address space |
| 312 | * to |
| 313 | * CE address space |
| 314 | */ |
| 315 | ath10k_pci_wake(ar); |
| 316 | address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem, address); |
| 317 | ath10k_pci_sleep(ar); |
| 318 | |
| 319 | remaining_bytes = orig_nbytes; |
| 320 | ce_data = ce_data_base; |
| 321 | while (remaining_bytes) { |
| 322 | /* FIXME: check cast */ |
| 323 | nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT); |
| 324 | |
| 325 | /* Set up to receive directly into Target(!) address */ |
| 326 | ret = ath10k_ce_recv_buf_enqueue(ce_diag, NULL, address); |
| 327 | if (ret != 0) |
| 328 | goto done; |
| 329 | |
| 330 | /* |
| 331 | * Request CE to send caller-supplied data that |
| 332 | * was copied to bounce buffer to Target(!) address. |
| 333 | */ |
| 334 | ret = ath10k_ce_send(ce_diag, NULL, (u32) ce_data, |
| 335 | nbytes, 0, 0); |
| 336 | if (ret != 0) |
| 337 | goto done; |
| 338 | |
| 339 | i = 0; |
| 340 | while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf, |
| 341 | &completed_nbytes, |
| 342 | &id) != 0) { |
| 343 | mdelay(1); |
| 344 | |
| 345 | if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| 346 | ret = -EBUSY; |
| 347 | goto done; |
| 348 | } |
| 349 | } |
| 350 | |
| 351 | if (nbytes != completed_nbytes) { |
| 352 | ret = -EIO; |
| 353 | goto done; |
| 354 | } |
| 355 | |
| 356 | if (buf != ce_data) { |
| 357 | ret = -EIO; |
| 358 | goto done; |
| 359 | } |
| 360 | |
| 361 | i = 0; |
| 362 | while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf, |
| 363 | &completed_nbytes, |
| 364 | &id, &flags) != 0) { |
| 365 | mdelay(1); |
| 366 | |
| 367 | if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| 368 | ret = -EBUSY; |
| 369 | goto done; |
| 370 | } |
| 371 | } |
| 372 | |
| 373 | if (nbytes != completed_nbytes) { |
| 374 | ret = -EIO; |
| 375 | goto done; |
| 376 | } |
| 377 | |
| 378 | if (buf != address) { |
| 379 | ret = -EIO; |
| 380 | goto done; |
| 381 | } |
| 382 | |
| 383 | remaining_bytes -= nbytes; |
| 384 | address += nbytes; |
| 385 | ce_data += nbytes; |
| 386 | } |
| 387 | |
| 388 | done: |
| 389 | if (data_buf) { |
| 390 | pci_free_consistent(ar_pci->pdev, orig_nbytes, data_buf, |
| 391 | ce_data_base); |
| 392 | } |
| 393 | |
| 394 | if (ret != 0) |
| 395 | ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", __func__, |
| 396 | address); |
| 397 | |
| 398 | return ret; |
| 399 | } |
| 400 | |
| 401 | /* Write 4B data to Target memory or register */ |
| 402 | static int ath10k_pci_diag_write_access(struct ath10k *ar, u32 address, |
| 403 | u32 data) |
| 404 | { |
| 405 | /* Assume range doesn't cross this boundary */ |
| 406 | if (address >= DRAM_BASE_ADDRESS) |
| 407 | return ath10k_pci_diag_write_mem(ar, address, &data, |
| 408 | sizeof(u32)); |
| 409 | |
| 410 | ath10k_pci_wake(ar); |
| 411 | ath10k_pci_write32(ar, address, data); |
| 412 | ath10k_pci_sleep(ar); |
| 413 | return 0; |
| 414 | } |
| 415 | |
| 416 | static bool ath10k_pci_target_is_awake(struct ath10k *ar) |
| 417 | { |
| 418 | void __iomem *mem = ath10k_pci_priv(ar)->mem; |
| 419 | u32 val; |
| 420 | val = ioread32(mem + PCIE_LOCAL_BASE_ADDRESS + |
| 421 | RTC_STATE_ADDRESS); |
| 422 | return (RTC_STATE_V_GET(val) == RTC_STATE_V_ON); |
| 423 | } |
| 424 | |
| 425 | static void ath10k_pci_wait(struct ath10k *ar) |
| 426 | { |
| 427 | int n = 100; |
| 428 | |
| 429 | while (n-- && !ath10k_pci_target_is_awake(ar)) |
| 430 | msleep(10); |
| 431 | |
| 432 | if (n < 0) |
| 433 | ath10k_warn("Unable to wakeup target\n"); |
| 434 | } |
| 435 | |
| 436 | void ath10k_do_pci_wake(struct ath10k *ar) |
| 437 | { |
| 438 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 439 | void __iomem *pci_addr = ar_pci->mem; |
| 440 | int tot_delay = 0; |
| 441 | int curr_delay = 5; |
| 442 | |
| 443 | if (atomic_read(&ar_pci->keep_awake_count) == 0) { |
| 444 | /* Force AWAKE */ |
| 445 | iowrite32(PCIE_SOC_WAKE_V_MASK, |
| 446 | pci_addr + PCIE_LOCAL_BASE_ADDRESS + |
| 447 | PCIE_SOC_WAKE_ADDRESS); |
| 448 | } |
| 449 | atomic_inc(&ar_pci->keep_awake_count); |
| 450 | |
| 451 | if (ar_pci->verified_awake) |
| 452 | return; |
| 453 | |
| 454 | for (;;) { |
| 455 | if (ath10k_pci_target_is_awake(ar)) { |
| 456 | ar_pci->verified_awake = true; |
| 457 | break; |
| 458 | } |
| 459 | |
| 460 | if (tot_delay > PCIE_WAKE_TIMEOUT) { |
| 461 | ath10k_warn("target takes too long to wake up (awake count %d)\n", |
| 462 | atomic_read(&ar_pci->keep_awake_count)); |
| 463 | break; |
| 464 | } |
| 465 | |
| 466 | udelay(curr_delay); |
| 467 | tot_delay += curr_delay; |
| 468 | |
| 469 | if (curr_delay < 50) |
| 470 | curr_delay += 5; |
| 471 | } |
| 472 | } |
| 473 | |
| 474 | void ath10k_do_pci_sleep(struct ath10k *ar) |
| 475 | { |
| 476 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 477 | void __iomem *pci_addr = ar_pci->mem; |
| 478 | |
| 479 | if (atomic_dec_and_test(&ar_pci->keep_awake_count)) { |
| 480 | /* Allow sleep */ |
| 481 | ar_pci->verified_awake = false; |
| 482 | iowrite32(PCIE_SOC_WAKE_RESET, |
| 483 | pci_addr + PCIE_LOCAL_BASE_ADDRESS + |
| 484 | PCIE_SOC_WAKE_ADDRESS); |
| 485 | } |
| 486 | } |
| 487 | |
| 488 | /* |
| 489 | * FIXME: Handle OOM properly. |
| 490 | */ |
| 491 | static inline |
| 492 | struct ath10k_pci_compl *get_free_compl(struct hif_ce_pipe_info *pipe_info) |
| 493 | { |
| 494 | struct ath10k_pci_compl *compl = NULL; |
| 495 | |
| 496 | spin_lock_bh(&pipe_info->pipe_lock); |
| 497 | if (list_empty(&pipe_info->compl_free)) { |
| 498 | ath10k_warn("Completion buffers are full\n"); |
| 499 | goto exit; |
| 500 | } |
| 501 | compl = list_first_entry(&pipe_info->compl_free, |
| 502 | struct ath10k_pci_compl, list); |
| 503 | list_del(&compl->list); |
| 504 | exit: |
| 505 | spin_unlock_bh(&pipe_info->pipe_lock); |
| 506 | return compl; |
| 507 | } |
| 508 | |
| 509 | /* Called by lower (CE) layer when a send to Target completes. */ |
| 510 | static void ath10k_pci_ce_send_done(struct ce_state *ce_state, |
| 511 | void *transfer_context, |
| 512 | u32 ce_data, |
| 513 | unsigned int nbytes, |
| 514 | unsigned int transfer_id) |
| 515 | { |
| 516 | struct ath10k *ar = ce_state->ar; |
| 517 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 518 | struct hif_ce_pipe_info *pipe_info = &ar_pci->pipe_info[ce_state->id]; |
| 519 | struct ath10k_pci_compl *compl; |
| 520 | bool process = false; |
| 521 | |
| 522 | do { |
| 523 | /* |
| 524 | * For the send completion of an item in sendlist, just |
| 525 | * increment num_sends_allowed. The upper layer callback will |
| 526 | * be triggered when last fragment is done with send. |
| 527 | */ |
| 528 | if (transfer_context == CE_SENDLIST_ITEM_CTXT) { |
| 529 | spin_lock_bh(&pipe_info->pipe_lock); |
| 530 | pipe_info->num_sends_allowed++; |
| 531 | spin_unlock_bh(&pipe_info->pipe_lock); |
| 532 | continue; |
| 533 | } |
| 534 | |
| 535 | compl = get_free_compl(pipe_info); |
| 536 | if (!compl) |
| 537 | break; |
| 538 | |
| 539 | compl->send_or_recv = HIF_CE_COMPLETE_SEND; |
| 540 | compl->ce_state = ce_state; |
| 541 | compl->pipe_info = pipe_info; |
| 542 | compl->transfer_context = transfer_context; |
| 543 | compl->nbytes = nbytes; |
| 544 | compl->transfer_id = transfer_id; |
| 545 | compl->flags = 0; |
| 546 | |
| 547 | /* |
| 548 | * Add the completion to the processing queue. |
| 549 | */ |
| 550 | spin_lock_bh(&ar_pci->compl_lock); |
| 551 | list_add_tail(&compl->list, &ar_pci->compl_process); |
| 552 | spin_unlock_bh(&ar_pci->compl_lock); |
| 553 | |
| 554 | process = true; |
| 555 | } while (ath10k_ce_completed_send_next(ce_state, |
| 556 | &transfer_context, |
| 557 | &ce_data, &nbytes, |
| 558 | &transfer_id) == 0); |
| 559 | |
| 560 | /* |
| 561 | * If only some of the items within a sendlist have completed, |
| 562 | * don't invoke completion processing until the entire sendlist |
| 563 | * has been sent. |
| 564 | */ |
| 565 | if (!process) |
| 566 | return; |
| 567 | |
| 568 | ath10k_pci_process_ce(ar); |
| 569 | } |
| 570 | |
| 571 | /* Called by lower (CE) layer when data is received from the Target. */ |
| 572 | static void ath10k_pci_ce_recv_data(struct ce_state *ce_state, |
| 573 | void *transfer_context, u32 ce_data, |
| 574 | unsigned int nbytes, |
| 575 | unsigned int transfer_id, |
| 576 | unsigned int flags) |
| 577 | { |
| 578 | struct ath10k *ar = ce_state->ar; |
| 579 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 580 | struct hif_ce_pipe_info *pipe_info = &ar_pci->pipe_info[ce_state->id]; |
| 581 | struct ath10k_pci_compl *compl; |
| 582 | struct sk_buff *skb; |
| 583 | |
| 584 | do { |
| 585 | compl = get_free_compl(pipe_info); |
| 586 | if (!compl) |
| 587 | break; |
| 588 | |
| 589 | compl->send_or_recv = HIF_CE_COMPLETE_RECV; |
| 590 | compl->ce_state = ce_state; |
| 591 | compl->pipe_info = pipe_info; |
| 592 | compl->transfer_context = transfer_context; |
| 593 | compl->nbytes = nbytes; |
| 594 | compl->transfer_id = transfer_id; |
| 595 | compl->flags = flags; |
| 596 | |
| 597 | skb = transfer_context; |
| 598 | dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr, |
| 599 | skb->len + skb_tailroom(skb), |
| 600 | DMA_FROM_DEVICE); |
| 601 | /* |
| 602 | * Add the completion to the processing queue. |
| 603 | */ |
| 604 | spin_lock_bh(&ar_pci->compl_lock); |
| 605 | list_add_tail(&compl->list, &ar_pci->compl_process); |
| 606 | spin_unlock_bh(&ar_pci->compl_lock); |
| 607 | |
| 608 | } while (ath10k_ce_completed_recv_next(ce_state, |
| 609 | &transfer_context, |
| 610 | &ce_data, &nbytes, |
| 611 | &transfer_id, |
| 612 | &flags) == 0); |
| 613 | |
| 614 | ath10k_pci_process_ce(ar); |
| 615 | } |
| 616 | |
| 617 | /* Send the first nbytes bytes of the buffer */ |
| 618 | static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id, |
| 619 | unsigned int transfer_id, |
| 620 | unsigned int bytes, struct sk_buff *nbuf) |
| 621 | { |
| 622 | struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(nbuf); |
| 623 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 624 | struct hif_ce_pipe_info *pipe_info = &(ar_pci->pipe_info[pipe_id]); |
| 625 | struct ce_state *ce_hdl = pipe_info->ce_hdl; |
| 626 | struct ce_sendlist sendlist; |
| 627 | unsigned int len; |
| 628 | u32 flags = 0; |
| 629 | int ret; |
| 630 | |
| 631 | memset(&sendlist, 0, sizeof(struct ce_sendlist)); |
| 632 | |
| 633 | len = min(bytes, nbuf->len); |
| 634 | bytes -= len; |
| 635 | |
| 636 | if (len & 3) |
| 637 | ath10k_warn("skb not aligned to 4-byte boundary (%d)\n", len); |
| 638 | |
| 639 | ath10k_dbg(ATH10K_DBG_PCI, |
| 640 | "pci send data vaddr %p paddr 0x%llx len %d as %d bytes\n", |
| 641 | nbuf->data, (unsigned long long) skb_cb->paddr, |
| 642 | nbuf->len, len); |
| 643 | ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL, |
| 644 | "ath10k tx: data: ", |
| 645 | nbuf->data, nbuf->len); |
| 646 | |
| 647 | ath10k_ce_sendlist_buf_add(&sendlist, skb_cb->paddr, len, flags); |
| 648 | |
| 649 | /* Make sure we have resources to handle this request */ |
| 650 | spin_lock_bh(&pipe_info->pipe_lock); |
| 651 | if (!pipe_info->num_sends_allowed) { |
| 652 | ath10k_warn("Pipe: %d is full\n", pipe_id); |
| 653 | spin_unlock_bh(&pipe_info->pipe_lock); |
| 654 | return -ENOSR; |
| 655 | } |
| 656 | pipe_info->num_sends_allowed--; |
| 657 | spin_unlock_bh(&pipe_info->pipe_lock); |
| 658 | |
| 659 | ret = ath10k_ce_sendlist_send(ce_hdl, nbuf, &sendlist, transfer_id); |
| 660 | if (ret) |
| 661 | ath10k_warn("CE send failed: %p\n", nbuf); |
| 662 | |
| 663 | return ret; |
| 664 | } |
| 665 | |
| 666 | static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe) |
| 667 | { |
| 668 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 669 | struct hif_ce_pipe_info *pipe_info = &(ar_pci->pipe_info[pipe]); |
| 670 | int ret; |
| 671 | |
| 672 | spin_lock_bh(&pipe_info->pipe_lock); |
| 673 | ret = pipe_info->num_sends_allowed; |
| 674 | spin_unlock_bh(&pipe_info->pipe_lock); |
| 675 | |
| 676 | return ret; |
| 677 | } |
| 678 | |
| 679 | static void ath10k_pci_hif_dump_area(struct ath10k *ar) |
| 680 | { |
| 681 | u32 reg_dump_area = 0; |
| 682 | u32 reg_dump_values[REG_DUMP_COUNT_QCA988X] = {}; |
| 683 | u32 host_addr; |
| 684 | int ret; |
| 685 | u32 i; |
| 686 | |
| 687 | ath10k_err("firmware crashed!\n"); |
| 688 | ath10k_err("hardware name %s version 0x%x\n", |
| 689 | ar->hw_params.name, ar->target_version); |
| 690 | ath10k_err("firmware version: %u.%u.%u.%u\n", ar->fw_version_major, |
| 691 | ar->fw_version_minor, ar->fw_version_release, |
| 692 | ar->fw_version_build); |
| 693 | |
| 694 | host_addr = host_interest_item_address(HI_ITEM(hi_failure_state)); |
| 695 | if (ath10k_pci_diag_read_mem(ar, host_addr, |
| 696 | ®_dump_area, sizeof(u32)) != 0) { |
| 697 | ath10k_warn("could not read hi_failure_state\n"); |
| 698 | return; |
| 699 | } |
| 700 | |
| 701 | ath10k_err("target register Dump Location: 0x%08X\n", reg_dump_area); |
| 702 | |
| 703 | ret = ath10k_pci_diag_read_mem(ar, reg_dump_area, |
| 704 | ®_dump_values[0], |
| 705 | REG_DUMP_COUNT_QCA988X * sizeof(u32)); |
| 706 | if (ret != 0) { |
| 707 | ath10k_err("could not dump FW Dump Area\n"); |
| 708 | return; |
| 709 | } |
| 710 | |
| 711 | BUILD_BUG_ON(REG_DUMP_COUNT_QCA988X % 4); |
| 712 | |
| 713 | ath10k_err("target Register Dump\n"); |
| 714 | for (i = 0; i < REG_DUMP_COUNT_QCA988X; i += 4) |
| 715 | ath10k_err("[%02d]: 0x%08X 0x%08X 0x%08X 0x%08X\n", |
| 716 | i, |
| 717 | reg_dump_values[i], |
| 718 | reg_dump_values[i + 1], |
| 719 | reg_dump_values[i + 2], |
| 720 | reg_dump_values[i + 3]); |
| 721 | } |
| 722 | |
| 723 | static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe, |
| 724 | int force) |
| 725 | { |
| 726 | if (!force) { |
| 727 | int resources; |
| 728 | /* |
| 729 | * Decide whether to actually poll for completions, or just |
| 730 | * wait for a later chance. |
| 731 | * If there seem to be plenty of resources left, then just wait |
| 732 | * since checking involves reading a CE register, which is a |
| 733 | * relatively expensive operation. |
| 734 | */ |
| 735 | resources = ath10k_pci_hif_get_free_queue_number(ar, pipe); |
| 736 | |
| 737 | /* |
| 738 | * If at least 50% of the total resources are still available, |
| 739 | * don't bother checking again yet. |
| 740 | */ |
| 741 | if (resources > (host_ce_config_wlan[pipe].src_nentries >> 1)) |
| 742 | return; |
| 743 | } |
| 744 | ath10k_ce_per_engine_service(ar, pipe); |
| 745 | } |
| 746 | |
| 747 | static void ath10k_pci_hif_post_init(struct ath10k *ar, |
| 748 | struct ath10k_hif_cb *callbacks) |
| 749 | { |
| 750 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 751 | |
| 752 | ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| 753 | |
| 754 | memcpy(&ar_pci->msg_callbacks_current, callbacks, |
| 755 | sizeof(ar_pci->msg_callbacks_current)); |
| 756 | } |
| 757 | |
| 758 | static int ath10k_pci_start_ce(struct ath10k *ar) |
| 759 | { |
| 760 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 761 | struct ce_state *ce_diag = ar_pci->ce_diag; |
| 762 | const struct ce_attr *attr; |
| 763 | struct hif_ce_pipe_info *pipe_info; |
| 764 | struct ath10k_pci_compl *compl; |
| 765 | int i, pipe_num, completions, disable_interrupts; |
| 766 | |
| 767 | spin_lock_init(&ar_pci->compl_lock); |
| 768 | INIT_LIST_HEAD(&ar_pci->compl_process); |
| 769 | |
| 770 | for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { |
| 771 | pipe_info = &ar_pci->pipe_info[pipe_num]; |
| 772 | |
| 773 | spin_lock_init(&pipe_info->pipe_lock); |
| 774 | INIT_LIST_HEAD(&pipe_info->compl_free); |
| 775 | |
| 776 | /* Handle Diagnostic CE specially */ |
| 777 | if (pipe_info->ce_hdl == ce_diag) |
| 778 | continue; |
| 779 | |
| 780 | attr = &host_ce_config_wlan[pipe_num]; |
| 781 | completions = 0; |
| 782 | |
| 783 | if (attr->src_nentries) { |
| 784 | disable_interrupts = attr->flags & CE_ATTR_DIS_INTR; |
| 785 | ath10k_ce_send_cb_register(pipe_info->ce_hdl, |
| 786 | ath10k_pci_ce_send_done, |
| 787 | disable_interrupts); |
| 788 | completions += attr->src_nentries; |
| 789 | pipe_info->num_sends_allowed = attr->src_nentries - 1; |
| 790 | } |
| 791 | |
| 792 | if (attr->dest_nentries) { |
| 793 | ath10k_ce_recv_cb_register(pipe_info->ce_hdl, |
| 794 | ath10k_pci_ce_recv_data); |
| 795 | completions += attr->dest_nentries; |
| 796 | } |
| 797 | |
| 798 | if (completions == 0) |
| 799 | continue; |
| 800 | |
| 801 | for (i = 0; i < completions; i++) { |
| 802 | compl = kmalloc(sizeof(struct ath10k_pci_compl), |
| 803 | GFP_KERNEL); |
| 804 | if (!compl) { |
| 805 | ath10k_warn("No memory for completion state\n"); |
| 806 | ath10k_pci_stop_ce(ar); |
| 807 | return -ENOMEM; |
| 808 | } |
| 809 | |
| 810 | compl->send_or_recv = HIF_CE_COMPLETE_FREE; |
| 811 | list_add_tail(&compl->list, &pipe_info->compl_free); |
| 812 | } |
| 813 | } |
| 814 | |
| 815 | return 0; |
| 816 | } |
| 817 | |
| 818 | static void ath10k_pci_stop_ce(struct ath10k *ar) |
| 819 | { |
| 820 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 821 | struct ath10k_pci_compl *compl; |
| 822 | struct sk_buff *skb; |
| 823 | int i; |
| 824 | |
| 825 | ath10k_ce_disable_interrupts(ar); |
| 826 | |
| 827 | /* Cancel the pending tasklet */ |
| 828 | tasklet_kill(&ar_pci->intr_tq); |
| 829 | |
| 830 | for (i = 0; i < CE_COUNT; i++) |
| 831 | tasklet_kill(&ar_pci->pipe_info[i].intr); |
| 832 | |
| 833 | /* Mark pending completions as aborted, so that upper layers free up |
| 834 | * their associated resources */ |
| 835 | spin_lock_bh(&ar_pci->compl_lock); |
| 836 | list_for_each_entry(compl, &ar_pci->compl_process, list) { |
| 837 | skb = (struct sk_buff *)compl->transfer_context; |
| 838 | ATH10K_SKB_CB(skb)->is_aborted = true; |
| 839 | } |
| 840 | spin_unlock_bh(&ar_pci->compl_lock); |
| 841 | } |
| 842 | |
| 843 | static void ath10k_pci_cleanup_ce(struct ath10k *ar) |
| 844 | { |
| 845 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 846 | struct ath10k_pci_compl *compl, *tmp; |
| 847 | struct hif_ce_pipe_info *pipe_info; |
| 848 | struct sk_buff *netbuf; |
| 849 | int pipe_num; |
| 850 | |
| 851 | /* Free pending completions. */ |
| 852 | spin_lock_bh(&ar_pci->compl_lock); |
| 853 | if (!list_empty(&ar_pci->compl_process)) |
| 854 | ath10k_warn("pending completions still present! possible memory leaks.\n"); |
| 855 | |
| 856 | list_for_each_entry_safe(compl, tmp, &ar_pci->compl_process, list) { |
| 857 | list_del(&compl->list); |
| 858 | netbuf = (struct sk_buff *)compl->transfer_context; |
| 859 | dev_kfree_skb_any(netbuf); |
| 860 | kfree(compl); |
| 861 | } |
| 862 | spin_unlock_bh(&ar_pci->compl_lock); |
| 863 | |
| 864 | /* Free unused completions for each pipe. */ |
| 865 | for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { |
| 866 | pipe_info = &ar_pci->pipe_info[pipe_num]; |
| 867 | |
| 868 | spin_lock_bh(&pipe_info->pipe_lock); |
| 869 | list_for_each_entry_safe(compl, tmp, |
| 870 | &pipe_info->compl_free, list) { |
| 871 | list_del(&compl->list); |
| 872 | kfree(compl); |
| 873 | } |
| 874 | spin_unlock_bh(&pipe_info->pipe_lock); |
| 875 | } |
| 876 | } |
| 877 | |
| 878 | static void ath10k_pci_process_ce(struct ath10k *ar) |
| 879 | { |
| 880 | struct ath10k_pci *ar_pci = ar->hif.priv; |
| 881 | struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current; |
| 882 | struct ath10k_pci_compl *compl; |
| 883 | struct sk_buff *skb; |
| 884 | unsigned int nbytes; |
| 885 | int ret, send_done = 0; |
| 886 | |
| 887 | /* Upper layers aren't ready to handle tx/rx completions in parallel so |
| 888 | * we must serialize all completion processing. */ |
| 889 | |
| 890 | spin_lock_bh(&ar_pci->compl_lock); |
| 891 | if (ar_pci->compl_processing) { |
| 892 | spin_unlock_bh(&ar_pci->compl_lock); |
| 893 | return; |
| 894 | } |
| 895 | ar_pci->compl_processing = true; |
| 896 | spin_unlock_bh(&ar_pci->compl_lock); |
| 897 | |
| 898 | for (;;) { |
| 899 | spin_lock_bh(&ar_pci->compl_lock); |
| 900 | if (list_empty(&ar_pci->compl_process)) { |
| 901 | spin_unlock_bh(&ar_pci->compl_lock); |
| 902 | break; |
| 903 | } |
| 904 | compl = list_first_entry(&ar_pci->compl_process, |
| 905 | struct ath10k_pci_compl, list); |
| 906 | list_del(&compl->list); |
| 907 | spin_unlock_bh(&ar_pci->compl_lock); |
| 908 | |
| 909 | if (compl->send_or_recv == HIF_CE_COMPLETE_SEND) { |
| 910 | cb->tx_completion(ar, |
| 911 | compl->transfer_context, |
| 912 | compl->transfer_id); |
| 913 | send_done = 1; |
| 914 | } else { |
| 915 | ret = ath10k_pci_post_rx_pipe(compl->pipe_info, 1); |
| 916 | if (ret) { |
| 917 | ath10k_warn("Unable to post recv buffer for pipe: %d\n", |
| 918 | compl->pipe_info->pipe_num); |
| 919 | break; |
| 920 | } |
| 921 | |
| 922 | skb = (struct sk_buff *)compl->transfer_context; |
| 923 | nbytes = compl->nbytes; |
| 924 | |
| 925 | ath10k_dbg(ATH10K_DBG_PCI, |
| 926 | "ath10k_pci_ce_recv_data netbuf=%p nbytes=%d\n", |
| 927 | skb, nbytes); |
| 928 | ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL, |
| 929 | "ath10k rx: ", skb->data, nbytes); |
| 930 | |
| 931 | if (skb->len + skb_tailroom(skb) >= nbytes) { |
| 932 | skb_trim(skb, 0); |
| 933 | skb_put(skb, nbytes); |
| 934 | cb->rx_completion(ar, skb, |
| 935 | compl->pipe_info->pipe_num); |
| 936 | } else { |
| 937 | ath10k_warn("rxed more than expected (nbytes %d, max %d)", |
| 938 | nbytes, |
| 939 | skb->len + skb_tailroom(skb)); |
| 940 | } |
| 941 | } |
| 942 | |
| 943 | compl->send_or_recv = HIF_CE_COMPLETE_FREE; |
| 944 | |
| 945 | /* |
| 946 | * Add completion back to the pipe's free list. |
| 947 | */ |
| 948 | spin_lock_bh(&compl->pipe_info->pipe_lock); |
| 949 | list_add_tail(&compl->list, &compl->pipe_info->compl_free); |
| 950 | compl->pipe_info->num_sends_allowed += send_done; |
| 951 | spin_unlock_bh(&compl->pipe_info->pipe_lock); |
| 952 | } |
| 953 | |
| 954 | spin_lock_bh(&ar_pci->compl_lock); |
| 955 | ar_pci->compl_processing = false; |
| 956 | spin_unlock_bh(&ar_pci->compl_lock); |
| 957 | } |
| 958 | |
| 959 | /* TODO - temporary mapping while we have too few CE's */ |
| 960 | static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, |
| 961 | u16 service_id, u8 *ul_pipe, |
| 962 | u8 *dl_pipe, int *ul_is_polled, |
| 963 | int *dl_is_polled) |
| 964 | { |
| 965 | int ret = 0; |
| 966 | |
| 967 | /* polling for received messages not supported */ |
| 968 | *dl_is_polled = 0; |
| 969 | |
| 970 | switch (service_id) { |
| 971 | case ATH10K_HTC_SVC_ID_HTT_DATA_MSG: |
| 972 | /* |
| 973 | * Host->target HTT gets its own pipe, so it can be polled |
| 974 | * while other pipes are interrupt driven. |
| 975 | */ |
| 976 | *ul_pipe = 4; |
| 977 | /* |
| 978 | * Use the same target->host pipe for HTC ctrl, HTC raw |
| 979 | * streams, and HTT. |
| 980 | */ |
| 981 | *dl_pipe = 1; |
| 982 | break; |
| 983 | |
| 984 | case ATH10K_HTC_SVC_ID_RSVD_CTRL: |
| 985 | case ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS: |
| 986 | /* |
| 987 | * Note: HTC_RAW_STREAMS_SVC is currently unused, and |
| 988 | * HTC_CTRL_RSVD_SVC could share the same pipe as the |
| 989 | * WMI services. So, if another CE is needed, change |
| 990 | * this to *ul_pipe = 3, which frees up CE 0. |
| 991 | */ |
| 992 | /* *ul_pipe = 3; */ |
| 993 | *ul_pipe = 0; |
| 994 | *dl_pipe = 1; |
| 995 | break; |
| 996 | |
| 997 | case ATH10K_HTC_SVC_ID_WMI_DATA_BK: |
| 998 | case ATH10K_HTC_SVC_ID_WMI_DATA_BE: |
| 999 | case ATH10K_HTC_SVC_ID_WMI_DATA_VI: |
| 1000 | case ATH10K_HTC_SVC_ID_WMI_DATA_VO: |
| 1001 | |
| 1002 | case ATH10K_HTC_SVC_ID_WMI_CONTROL: |
| 1003 | *ul_pipe = 3; |
| 1004 | *dl_pipe = 2; |
| 1005 | break; |
| 1006 | |
| 1007 | /* pipe 5 unused */ |
| 1008 | /* pipe 6 reserved */ |
| 1009 | /* pipe 7 reserved */ |
| 1010 | |
| 1011 | default: |
| 1012 | ret = -1; |
| 1013 | break; |
| 1014 | } |
| 1015 | *ul_is_polled = |
| 1016 | (host_ce_config_wlan[*ul_pipe].flags & CE_ATTR_DIS_INTR) != 0; |
| 1017 | |
| 1018 | return ret; |
| 1019 | } |
| 1020 | |
| 1021 | static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar, |
| 1022 | u8 *ul_pipe, u8 *dl_pipe) |
| 1023 | { |
| 1024 | int ul_is_polled, dl_is_polled; |
| 1025 | |
| 1026 | (void)ath10k_pci_hif_map_service_to_pipe(ar, |
| 1027 | ATH10K_HTC_SVC_ID_RSVD_CTRL, |
| 1028 | ul_pipe, |
| 1029 | dl_pipe, |
| 1030 | &ul_is_polled, |
| 1031 | &dl_is_polled); |
| 1032 | } |
| 1033 | |
| 1034 | static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info, |
| 1035 | int num) |
| 1036 | { |
| 1037 | struct ath10k *ar = pipe_info->hif_ce_state; |
| 1038 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1039 | struct ce_state *ce_state = pipe_info->ce_hdl; |
| 1040 | struct sk_buff *skb; |
| 1041 | dma_addr_t ce_data; |
| 1042 | int i, ret = 0; |
| 1043 | |
| 1044 | if (pipe_info->buf_sz == 0) |
| 1045 | return 0; |
| 1046 | |
| 1047 | for (i = 0; i < num; i++) { |
| 1048 | skb = dev_alloc_skb(pipe_info->buf_sz); |
| 1049 | if (!skb) { |
| 1050 | ath10k_warn("could not allocate skbuff for pipe %d\n", |
| 1051 | num); |
| 1052 | ret = -ENOMEM; |
| 1053 | goto err; |
| 1054 | } |
| 1055 | |
| 1056 | WARN_ONCE((unsigned long)skb->data & 3, "unaligned skb"); |
| 1057 | |
| 1058 | ce_data = dma_map_single(ar->dev, skb->data, |
| 1059 | skb->len + skb_tailroom(skb), |
| 1060 | DMA_FROM_DEVICE); |
| 1061 | |
| 1062 | if (unlikely(dma_mapping_error(ar->dev, ce_data))) { |
| 1063 | ath10k_warn("could not dma map skbuff\n"); |
| 1064 | dev_kfree_skb_any(skb); |
| 1065 | ret = -EIO; |
| 1066 | goto err; |
| 1067 | } |
| 1068 | |
| 1069 | ATH10K_SKB_CB(skb)->paddr = ce_data; |
| 1070 | |
| 1071 | pci_dma_sync_single_for_device(ar_pci->pdev, ce_data, |
| 1072 | pipe_info->buf_sz, |
| 1073 | PCI_DMA_FROMDEVICE); |
| 1074 | |
| 1075 | ret = ath10k_ce_recv_buf_enqueue(ce_state, (void *)skb, |
| 1076 | ce_data); |
| 1077 | if (ret) { |
| 1078 | ath10k_warn("could not enqueue to pipe %d (%d)\n", |
| 1079 | num, ret); |
| 1080 | goto err; |
| 1081 | } |
| 1082 | } |
| 1083 | |
| 1084 | return ret; |
| 1085 | |
| 1086 | err: |
| 1087 | ath10k_pci_rx_pipe_cleanup(pipe_info); |
| 1088 | return ret; |
| 1089 | } |
| 1090 | |
| 1091 | static int ath10k_pci_post_rx(struct ath10k *ar) |
| 1092 | { |
| 1093 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1094 | struct hif_ce_pipe_info *pipe_info; |
| 1095 | const struct ce_attr *attr; |
| 1096 | int pipe_num, ret = 0; |
| 1097 | |
| 1098 | for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { |
| 1099 | pipe_info = &ar_pci->pipe_info[pipe_num]; |
| 1100 | attr = &host_ce_config_wlan[pipe_num]; |
| 1101 | |
| 1102 | if (attr->dest_nentries == 0) |
| 1103 | continue; |
| 1104 | |
| 1105 | ret = ath10k_pci_post_rx_pipe(pipe_info, |
| 1106 | attr->dest_nentries - 1); |
| 1107 | if (ret) { |
| 1108 | ath10k_warn("Unable to replenish recv buffers for pipe: %d\n", |
| 1109 | pipe_num); |
| 1110 | |
| 1111 | for (; pipe_num >= 0; pipe_num--) { |
| 1112 | pipe_info = &ar_pci->pipe_info[pipe_num]; |
| 1113 | ath10k_pci_rx_pipe_cleanup(pipe_info); |
| 1114 | } |
| 1115 | return ret; |
| 1116 | } |
| 1117 | } |
| 1118 | |
| 1119 | return 0; |
| 1120 | } |
| 1121 | |
| 1122 | static int ath10k_pci_hif_start(struct ath10k *ar) |
| 1123 | { |
| 1124 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1125 | int ret; |
| 1126 | |
| 1127 | ret = ath10k_pci_start_ce(ar); |
| 1128 | if (ret) { |
| 1129 | ath10k_warn("could not start CE (%d)\n", ret); |
| 1130 | return ret; |
| 1131 | } |
| 1132 | |
| 1133 | /* Post buffers once to start things off. */ |
| 1134 | ret = ath10k_pci_post_rx(ar); |
| 1135 | if (ret) { |
| 1136 | ath10k_warn("could not post rx pipes (%d)\n", ret); |
| 1137 | return ret; |
| 1138 | } |
| 1139 | |
| 1140 | ar_pci->started = 1; |
| 1141 | return 0; |
| 1142 | } |
| 1143 | |
| 1144 | static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info) |
| 1145 | { |
| 1146 | struct ath10k *ar; |
| 1147 | struct ath10k_pci *ar_pci; |
| 1148 | struct ce_state *ce_hdl; |
| 1149 | u32 buf_sz; |
| 1150 | struct sk_buff *netbuf; |
| 1151 | u32 ce_data; |
| 1152 | |
| 1153 | buf_sz = pipe_info->buf_sz; |
| 1154 | |
| 1155 | /* Unused Copy Engine */ |
| 1156 | if (buf_sz == 0) |
| 1157 | return; |
| 1158 | |
| 1159 | ar = pipe_info->hif_ce_state; |
| 1160 | ar_pci = ath10k_pci_priv(ar); |
| 1161 | |
| 1162 | if (!ar_pci->started) |
| 1163 | return; |
| 1164 | |
| 1165 | ce_hdl = pipe_info->ce_hdl; |
| 1166 | |
| 1167 | while (ath10k_ce_revoke_recv_next(ce_hdl, (void **)&netbuf, |
| 1168 | &ce_data) == 0) { |
| 1169 | dma_unmap_single(ar->dev, ATH10K_SKB_CB(netbuf)->paddr, |
| 1170 | netbuf->len + skb_tailroom(netbuf), |
| 1171 | DMA_FROM_DEVICE); |
| 1172 | dev_kfree_skb_any(netbuf); |
| 1173 | } |
| 1174 | } |
| 1175 | |
| 1176 | static void ath10k_pci_tx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info) |
| 1177 | { |
| 1178 | struct ath10k *ar; |
| 1179 | struct ath10k_pci *ar_pci; |
| 1180 | struct ce_state *ce_hdl; |
| 1181 | struct sk_buff *netbuf; |
| 1182 | u32 ce_data; |
| 1183 | unsigned int nbytes; |
| 1184 | unsigned int id; |
| 1185 | u32 buf_sz; |
| 1186 | |
| 1187 | buf_sz = pipe_info->buf_sz; |
| 1188 | |
| 1189 | /* Unused Copy Engine */ |
| 1190 | if (buf_sz == 0) |
| 1191 | return; |
| 1192 | |
| 1193 | ar = pipe_info->hif_ce_state; |
| 1194 | ar_pci = ath10k_pci_priv(ar); |
| 1195 | |
| 1196 | if (!ar_pci->started) |
| 1197 | return; |
| 1198 | |
| 1199 | ce_hdl = pipe_info->ce_hdl; |
| 1200 | |
| 1201 | while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf, |
| 1202 | &ce_data, &nbytes, &id) == 0) { |
| 1203 | if (netbuf != CE_SENDLIST_ITEM_CTXT) |
| 1204 | /* |
| 1205 | * Indicate the completion to higer layer to free |
| 1206 | * the buffer |
| 1207 | */ |
| 1208 | ATH10K_SKB_CB(netbuf)->is_aborted = true; |
| 1209 | ar_pci->msg_callbacks_current.tx_completion(ar, |
| 1210 | netbuf, |
| 1211 | id); |
| 1212 | } |
| 1213 | } |
| 1214 | |
| 1215 | /* |
| 1216 | * Cleanup residual buffers for device shutdown: |
| 1217 | * buffers that were enqueued for receive |
| 1218 | * buffers that were to be sent |
| 1219 | * Note: Buffers that had completed but which were |
| 1220 | * not yet processed are on a completion queue. They |
| 1221 | * are handled when the completion thread shuts down. |
| 1222 | */ |
| 1223 | static void ath10k_pci_buffer_cleanup(struct ath10k *ar) |
| 1224 | { |
| 1225 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1226 | int pipe_num; |
| 1227 | |
| 1228 | for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { |
| 1229 | struct hif_ce_pipe_info *pipe_info; |
| 1230 | |
| 1231 | pipe_info = &ar_pci->pipe_info[pipe_num]; |
| 1232 | ath10k_pci_rx_pipe_cleanup(pipe_info); |
| 1233 | ath10k_pci_tx_pipe_cleanup(pipe_info); |
| 1234 | } |
| 1235 | } |
| 1236 | |
| 1237 | static void ath10k_pci_ce_deinit(struct ath10k *ar) |
| 1238 | { |
| 1239 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1240 | struct hif_ce_pipe_info *pipe_info; |
| 1241 | int pipe_num; |
| 1242 | |
| 1243 | for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { |
| 1244 | pipe_info = &ar_pci->pipe_info[pipe_num]; |
| 1245 | if (pipe_info->ce_hdl) { |
| 1246 | ath10k_ce_deinit(pipe_info->ce_hdl); |
| 1247 | pipe_info->ce_hdl = NULL; |
| 1248 | pipe_info->buf_sz = 0; |
| 1249 | } |
| 1250 | } |
| 1251 | } |
| 1252 | |
| 1253 | static void ath10k_pci_hif_stop(struct ath10k *ar) |
| 1254 | { |
| 1255 | ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| 1256 | |
| 1257 | ath10k_pci_stop_ce(ar); |
| 1258 | |
| 1259 | /* At this point, asynchronous threads are stopped, the target should |
| 1260 | * not DMA nor interrupt. We process the leftovers and then free |
| 1261 | * everything else up. */ |
| 1262 | |
| 1263 | ath10k_pci_process_ce(ar); |
| 1264 | ath10k_pci_cleanup_ce(ar); |
| 1265 | ath10k_pci_buffer_cleanup(ar); |
| 1266 | ath10k_pci_ce_deinit(ar); |
| 1267 | } |
| 1268 | |
| 1269 | static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar, |
| 1270 | void *req, u32 req_len, |
| 1271 | void *resp, u32 *resp_len) |
| 1272 | { |
| 1273 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1274 | struct ce_state *ce_tx = ar_pci->pipe_info[BMI_CE_NUM_TO_TARG].ce_hdl; |
| 1275 | struct ce_state *ce_rx = ar_pci->pipe_info[BMI_CE_NUM_TO_HOST].ce_hdl; |
| 1276 | dma_addr_t req_paddr = 0; |
| 1277 | dma_addr_t resp_paddr = 0; |
| 1278 | struct bmi_xfer xfer = {}; |
| 1279 | void *treq, *tresp = NULL; |
| 1280 | int ret = 0; |
| 1281 | |
| 1282 | if (resp && !resp_len) |
| 1283 | return -EINVAL; |
| 1284 | |
| 1285 | if (resp && resp_len && *resp_len == 0) |
| 1286 | return -EINVAL; |
| 1287 | |
| 1288 | treq = kmemdup(req, req_len, GFP_KERNEL); |
| 1289 | if (!treq) |
| 1290 | return -ENOMEM; |
| 1291 | |
| 1292 | req_paddr = dma_map_single(ar->dev, treq, req_len, DMA_TO_DEVICE); |
| 1293 | ret = dma_mapping_error(ar->dev, req_paddr); |
| 1294 | if (ret) |
| 1295 | goto err_dma; |
| 1296 | |
| 1297 | if (resp && resp_len) { |
| 1298 | tresp = kzalloc(*resp_len, GFP_KERNEL); |
| 1299 | if (!tresp) { |
| 1300 | ret = -ENOMEM; |
| 1301 | goto err_req; |
| 1302 | } |
| 1303 | |
| 1304 | resp_paddr = dma_map_single(ar->dev, tresp, *resp_len, |
| 1305 | DMA_FROM_DEVICE); |
| 1306 | ret = dma_mapping_error(ar->dev, resp_paddr); |
| 1307 | if (ret) |
| 1308 | goto err_req; |
| 1309 | |
| 1310 | xfer.wait_for_resp = true; |
| 1311 | xfer.resp_len = 0; |
| 1312 | |
| 1313 | ath10k_ce_recv_buf_enqueue(ce_rx, &xfer, resp_paddr); |
| 1314 | } |
| 1315 | |
| 1316 | init_completion(&xfer.done); |
| 1317 | |
| 1318 | ret = ath10k_ce_send(ce_tx, &xfer, req_paddr, req_len, -1, 0); |
| 1319 | if (ret) |
| 1320 | goto err_resp; |
| 1321 | |
| 1322 | ret = wait_for_completion_timeout(&xfer.done, |
| 1323 | BMI_COMMUNICATION_TIMEOUT_HZ); |
| 1324 | if (ret <= 0) { |
| 1325 | u32 unused_buffer; |
| 1326 | unsigned int unused_nbytes; |
| 1327 | unsigned int unused_id; |
| 1328 | |
| 1329 | ret = -ETIMEDOUT; |
| 1330 | ath10k_ce_cancel_send_next(ce_tx, NULL, &unused_buffer, |
| 1331 | &unused_nbytes, &unused_id); |
| 1332 | } else { |
| 1333 | /* non-zero means we did not time out */ |
| 1334 | ret = 0; |
| 1335 | } |
| 1336 | |
| 1337 | err_resp: |
| 1338 | if (resp) { |
| 1339 | u32 unused_buffer; |
| 1340 | |
| 1341 | ath10k_ce_revoke_recv_next(ce_rx, NULL, &unused_buffer); |
| 1342 | dma_unmap_single(ar->dev, resp_paddr, |
| 1343 | *resp_len, DMA_FROM_DEVICE); |
| 1344 | } |
| 1345 | err_req: |
| 1346 | dma_unmap_single(ar->dev, req_paddr, req_len, DMA_TO_DEVICE); |
| 1347 | |
| 1348 | if (ret == 0 && resp_len) { |
| 1349 | *resp_len = min(*resp_len, xfer.resp_len); |
| 1350 | memcpy(resp, tresp, xfer.resp_len); |
| 1351 | } |
| 1352 | err_dma: |
| 1353 | kfree(treq); |
| 1354 | kfree(tresp); |
| 1355 | |
| 1356 | return ret; |
| 1357 | } |
| 1358 | |
| 1359 | static void ath10k_pci_bmi_send_done(struct ce_state *ce_state, |
| 1360 | void *transfer_context, |
| 1361 | u32 data, |
| 1362 | unsigned int nbytes, |
| 1363 | unsigned int transfer_id) |
| 1364 | { |
| 1365 | struct bmi_xfer *xfer = transfer_context; |
| 1366 | |
| 1367 | if (xfer->wait_for_resp) |
| 1368 | return; |
| 1369 | |
| 1370 | complete(&xfer->done); |
| 1371 | } |
| 1372 | |
| 1373 | static void ath10k_pci_bmi_recv_data(struct ce_state *ce_state, |
| 1374 | void *transfer_context, |
| 1375 | u32 data, |
| 1376 | unsigned int nbytes, |
| 1377 | unsigned int transfer_id, |
| 1378 | unsigned int flags) |
| 1379 | { |
| 1380 | struct bmi_xfer *xfer = transfer_context; |
| 1381 | |
| 1382 | if (!xfer->wait_for_resp) { |
| 1383 | ath10k_warn("unexpected: BMI data received; ignoring\n"); |
| 1384 | return; |
| 1385 | } |
| 1386 | |
| 1387 | xfer->resp_len = nbytes; |
| 1388 | complete(&xfer->done); |
| 1389 | } |
| 1390 | |
| 1391 | /* |
| 1392 | * Map from service/endpoint to Copy Engine. |
| 1393 | * This table is derived from the CE_PCI TABLE, above. |
| 1394 | * It is passed to the Target at startup for use by firmware. |
| 1395 | */ |
| 1396 | static const struct service_to_pipe target_service_to_ce_map_wlan[] = { |
| 1397 | { |
| 1398 | ATH10K_HTC_SVC_ID_WMI_DATA_VO, |
| 1399 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1400 | 3, |
| 1401 | }, |
| 1402 | { |
| 1403 | ATH10K_HTC_SVC_ID_WMI_DATA_VO, |
| 1404 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1405 | 2, |
| 1406 | }, |
| 1407 | { |
| 1408 | ATH10K_HTC_SVC_ID_WMI_DATA_BK, |
| 1409 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1410 | 3, |
| 1411 | }, |
| 1412 | { |
| 1413 | ATH10K_HTC_SVC_ID_WMI_DATA_BK, |
| 1414 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1415 | 2, |
| 1416 | }, |
| 1417 | { |
| 1418 | ATH10K_HTC_SVC_ID_WMI_DATA_BE, |
| 1419 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1420 | 3, |
| 1421 | }, |
| 1422 | { |
| 1423 | ATH10K_HTC_SVC_ID_WMI_DATA_BE, |
| 1424 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1425 | 2, |
| 1426 | }, |
| 1427 | { |
| 1428 | ATH10K_HTC_SVC_ID_WMI_DATA_VI, |
| 1429 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1430 | 3, |
| 1431 | }, |
| 1432 | { |
| 1433 | ATH10K_HTC_SVC_ID_WMI_DATA_VI, |
| 1434 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1435 | 2, |
| 1436 | }, |
| 1437 | { |
| 1438 | ATH10K_HTC_SVC_ID_WMI_CONTROL, |
| 1439 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1440 | 3, |
| 1441 | }, |
| 1442 | { |
| 1443 | ATH10K_HTC_SVC_ID_WMI_CONTROL, |
| 1444 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1445 | 2, |
| 1446 | }, |
| 1447 | { |
| 1448 | ATH10K_HTC_SVC_ID_RSVD_CTRL, |
| 1449 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1450 | 0, /* could be moved to 3 (share with WMI) */ |
| 1451 | }, |
| 1452 | { |
| 1453 | ATH10K_HTC_SVC_ID_RSVD_CTRL, |
| 1454 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1455 | 1, |
| 1456 | }, |
| 1457 | { |
| 1458 | ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS, /* not currently used */ |
| 1459 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1460 | 0, |
| 1461 | }, |
| 1462 | { |
| 1463 | ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS, /* not currently used */ |
| 1464 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1465 | 1, |
| 1466 | }, |
| 1467 | { |
| 1468 | ATH10K_HTC_SVC_ID_HTT_DATA_MSG, |
| 1469 | PIPEDIR_OUT, /* out = UL = host -> target */ |
| 1470 | 4, |
| 1471 | }, |
| 1472 | { |
| 1473 | ATH10K_HTC_SVC_ID_HTT_DATA_MSG, |
| 1474 | PIPEDIR_IN, /* in = DL = target -> host */ |
| 1475 | 1, |
| 1476 | }, |
| 1477 | |
| 1478 | /* (Additions here) */ |
| 1479 | |
| 1480 | { /* Must be last */ |
| 1481 | 0, |
| 1482 | 0, |
| 1483 | 0, |
| 1484 | }, |
| 1485 | }; |
| 1486 | |
| 1487 | /* |
| 1488 | * Send an interrupt to the device to wake up the Target CPU |
| 1489 | * so it has an opportunity to notice any changed state. |
| 1490 | */ |
| 1491 | static int ath10k_pci_wake_target_cpu(struct ath10k *ar) |
| 1492 | { |
| 1493 | int ret; |
| 1494 | u32 core_ctrl; |
| 1495 | |
| 1496 | ret = ath10k_pci_diag_read_access(ar, SOC_CORE_BASE_ADDRESS | |
| 1497 | CORE_CTRL_ADDRESS, |
| 1498 | &core_ctrl); |
| 1499 | if (ret) { |
| 1500 | ath10k_warn("Unable to read core ctrl\n"); |
| 1501 | return ret; |
| 1502 | } |
| 1503 | |
| 1504 | /* A_INUM_FIRMWARE interrupt to Target CPU */ |
| 1505 | core_ctrl |= CORE_CTRL_CPU_INTR_MASK; |
| 1506 | |
| 1507 | ret = ath10k_pci_diag_write_access(ar, SOC_CORE_BASE_ADDRESS | |
| 1508 | CORE_CTRL_ADDRESS, |
| 1509 | core_ctrl); |
| 1510 | if (ret) |
| 1511 | ath10k_warn("Unable to set interrupt mask\n"); |
| 1512 | |
| 1513 | return ret; |
| 1514 | } |
| 1515 | |
| 1516 | static int ath10k_pci_init_config(struct ath10k *ar) |
| 1517 | { |
| 1518 | u32 interconnect_targ_addr; |
| 1519 | u32 pcie_state_targ_addr = 0; |
| 1520 | u32 pipe_cfg_targ_addr = 0; |
| 1521 | u32 svc_to_pipe_map = 0; |
| 1522 | u32 pcie_config_flags = 0; |
| 1523 | u32 ealloc_value; |
| 1524 | u32 ealloc_targ_addr; |
| 1525 | u32 flag2_value; |
| 1526 | u32 flag2_targ_addr; |
| 1527 | int ret = 0; |
| 1528 | |
| 1529 | /* Download to Target the CE Config and the service-to-CE map */ |
| 1530 | interconnect_targ_addr = |
| 1531 | host_interest_item_address(HI_ITEM(hi_interconnect_state)); |
| 1532 | |
| 1533 | /* Supply Target-side CE configuration */ |
| 1534 | ret = ath10k_pci_diag_read_access(ar, interconnect_targ_addr, |
| 1535 | &pcie_state_targ_addr); |
| 1536 | if (ret != 0) { |
| 1537 | ath10k_err("Failed to get pcie state addr: %d\n", ret); |
| 1538 | return ret; |
| 1539 | } |
| 1540 | |
| 1541 | if (pcie_state_targ_addr == 0) { |
| 1542 | ret = -EIO; |
| 1543 | ath10k_err("Invalid pcie state addr\n"); |
| 1544 | return ret; |
| 1545 | } |
| 1546 | |
| 1547 | ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr + |
| 1548 | offsetof(struct pcie_state, |
| 1549 | pipe_cfg_addr), |
| 1550 | &pipe_cfg_targ_addr); |
| 1551 | if (ret != 0) { |
| 1552 | ath10k_err("Failed to get pipe cfg addr: %d\n", ret); |
| 1553 | return ret; |
| 1554 | } |
| 1555 | |
| 1556 | if (pipe_cfg_targ_addr == 0) { |
| 1557 | ret = -EIO; |
| 1558 | ath10k_err("Invalid pipe cfg addr\n"); |
| 1559 | return ret; |
| 1560 | } |
| 1561 | |
| 1562 | ret = ath10k_pci_diag_write_mem(ar, pipe_cfg_targ_addr, |
| 1563 | target_ce_config_wlan, |
| 1564 | sizeof(target_ce_config_wlan)); |
| 1565 | |
| 1566 | if (ret != 0) { |
| 1567 | ath10k_err("Failed to write pipe cfg: %d\n", ret); |
| 1568 | return ret; |
| 1569 | } |
| 1570 | |
| 1571 | ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr + |
| 1572 | offsetof(struct pcie_state, |
| 1573 | svc_to_pipe_map), |
| 1574 | &svc_to_pipe_map); |
| 1575 | if (ret != 0) { |
| 1576 | ath10k_err("Failed to get svc/pipe map: %d\n", ret); |
| 1577 | return ret; |
| 1578 | } |
| 1579 | |
| 1580 | if (svc_to_pipe_map == 0) { |
| 1581 | ret = -EIO; |
| 1582 | ath10k_err("Invalid svc_to_pipe map\n"); |
| 1583 | return ret; |
| 1584 | } |
| 1585 | |
| 1586 | ret = ath10k_pci_diag_write_mem(ar, svc_to_pipe_map, |
| 1587 | target_service_to_ce_map_wlan, |
| 1588 | sizeof(target_service_to_ce_map_wlan)); |
| 1589 | if (ret != 0) { |
| 1590 | ath10k_err("Failed to write svc/pipe map: %d\n", ret); |
| 1591 | return ret; |
| 1592 | } |
| 1593 | |
| 1594 | ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr + |
| 1595 | offsetof(struct pcie_state, |
| 1596 | config_flags), |
| 1597 | &pcie_config_flags); |
| 1598 | if (ret != 0) { |
| 1599 | ath10k_err("Failed to get pcie config_flags: %d\n", ret); |
| 1600 | return ret; |
| 1601 | } |
| 1602 | |
| 1603 | pcie_config_flags &= ~PCIE_CONFIG_FLAG_ENABLE_L1; |
| 1604 | |
| 1605 | ret = ath10k_pci_diag_write_mem(ar, pcie_state_targ_addr + |
| 1606 | offsetof(struct pcie_state, config_flags), |
| 1607 | &pcie_config_flags, |
| 1608 | sizeof(pcie_config_flags)); |
| 1609 | if (ret != 0) { |
| 1610 | ath10k_err("Failed to write pcie config_flags: %d\n", ret); |
| 1611 | return ret; |
| 1612 | } |
| 1613 | |
| 1614 | /* configure early allocation */ |
| 1615 | ealloc_targ_addr = host_interest_item_address(HI_ITEM(hi_early_alloc)); |
| 1616 | |
| 1617 | ret = ath10k_pci_diag_read_access(ar, ealloc_targ_addr, &ealloc_value); |
| 1618 | if (ret != 0) { |
| 1619 | ath10k_err("Faile to get early alloc val: %d\n", ret); |
| 1620 | return ret; |
| 1621 | } |
| 1622 | |
| 1623 | /* first bank is switched to IRAM */ |
| 1624 | ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) & |
| 1625 | HI_EARLY_ALLOC_MAGIC_MASK); |
| 1626 | ealloc_value |= ((1 << HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) & |
| 1627 | HI_EARLY_ALLOC_IRAM_BANKS_MASK); |
| 1628 | |
| 1629 | ret = ath10k_pci_diag_write_access(ar, ealloc_targ_addr, ealloc_value); |
| 1630 | if (ret != 0) { |
| 1631 | ath10k_err("Failed to set early alloc val: %d\n", ret); |
| 1632 | return ret; |
| 1633 | } |
| 1634 | |
| 1635 | /* Tell Target to proceed with initialization */ |
| 1636 | flag2_targ_addr = host_interest_item_address(HI_ITEM(hi_option_flag2)); |
| 1637 | |
| 1638 | ret = ath10k_pci_diag_read_access(ar, flag2_targ_addr, &flag2_value); |
| 1639 | if (ret != 0) { |
| 1640 | ath10k_err("Failed to get option val: %d\n", ret); |
| 1641 | return ret; |
| 1642 | } |
| 1643 | |
| 1644 | flag2_value |= HI_OPTION_EARLY_CFG_DONE; |
| 1645 | |
| 1646 | ret = ath10k_pci_diag_write_access(ar, flag2_targ_addr, flag2_value); |
| 1647 | if (ret != 0) { |
| 1648 | ath10k_err("Failed to set option val: %d\n", ret); |
| 1649 | return ret; |
| 1650 | } |
| 1651 | |
| 1652 | return 0; |
| 1653 | } |
| 1654 | |
| 1655 | |
| 1656 | |
| 1657 | static int ath10k_pci_ce_init(struct ath10k *ar) |
| 1658 | { |
| 1659 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1660 | struct hif_ce_pipe_info *pipe_info; |
| 1661 | const struct ce_attr *attr; |
| 1662 | int pipe_num; |
| 1663 | |
| 1664 | for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { |
| 1665 | pipe_info = &ar_pci->pipe_info[pipe_num]; |
| 1666 | pipe_info->pipe_num = pipe_num; |
| 1667 | pipe_info->hif_ce_state = ar; |
| 1668 | attr = &host_ce_config_wlan[pipe_num]; |
| 1669 | |
| 1670 | pipe_info->ce_hdl = ath10k_ce_init(ar, pipe_num, attr); |
| 1671 | if (pipe_info->ce_hdl == NULL) { |
| 1672 | ath10k_err("Unable to initialize CE for pipe: %d\n", |
| 1673 | pipe_num); |
| 1674 | |
| 1675 | /* It is safe to call it here. It checks if ce_hdl is |
| 1676 | * valid for each pipe */ |
| 1677 | ath10k_pci_ce_deinit(ar); |
| 1678 | return -1; |
| 1679 | } |
| 1680 | |
| 1681 | if (pipe_num == ar_pci->ce_count - 1) { |
| 1682 | /* |
| 1683 | * Reserve the ultimate CE for |
| 1684 | * diagnostic Window support |
| 1685 | */ |
| 1686 | ar_pci->ce_diag = |
| 1687 | ar_pci->pipe_info[ar_pci->ce_count - 1].ce_hdl; |
| 1688 | continue; |
| 1689 | } |
| 1690 | |
| 1691 | pipe_info->buf_sz = (size_t) (attr->src_sz_max); |
| 1692 | } |
| 1693 | |
| 1694 | /* |
| 1695 | * Initially, establish CE completion handlers for use with BMI. |
| 1696 | * These are overwritten with generic handlers after we exit BMI phase. |
| 1697 | */ |
| 1698 | pipe_info = &ar_pci->pipe_info[BMI_CE_NUM_TO_TARG]; |
| 1699 | ath10k_ce_send_cb_register(pipe_info->ce_hdl, |
| 1700 | ath10k_pci_bmi_send_done, 0); |
| 1701 | |
| 1702 | pipe_info = &ar_pci->pipe_info[BMI_CE_NUM_TO_HOST]; |
| 1703 | ath10k_ce_recv_cb_register(pipe_info->ce_hdl, |
| 1704 | ath10k_pci_bmi_recv_data); |
| 1705 | |
| 1706 | return 0; |
| 1707 | } |
| 1708 | |
| 1709 | static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar) |
| 1710 | { |
| 1711 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1712 | u32 fw_indicator_address, fw_indicator; |
| 1713 | |
| 1714 | ath10k_pci_wake(ar); |
| 1715 | |
| 1716 | fw_indicator_address = ar_pci->fw_indicator_address; |
| 1717 | fw_indicator = ath10k_pci_read32(ar, fw_indicator_address); |
| 1718 | |
| 1719 | if (fw_indicator & FW_IND_EVENT_PENDING) { |
| 1720 | /* ACK: clear Target-side pending event */ |
| 1721 | ath10k_pci_write32(ar, fw_indicator_address, |
| 1722 | fw_indicator & ~FW_IND_EVENT_PENDING); |
| 1723 | |
| 1724 | if (ar_pci->started) { |
| 1725 | ath10k_pci_hif_dump_area(ar); |
| 1726 | } else { |
| 1727 | /* |
| 1728 | * Probable Target failure before we're prepared |
| 1729 | * to handle it. Generally unexpected. |
| 1730 | */ |
| 1731 | ath10k_warn("early firmware event indicated\n"); |
| 1732 | } |
| 1733 | } |
| 1734 | |
| 1735 | ath10k_pci_sleep(ar); |
| 1736 | } |
| 1737 | |
| 1738 | static const struct ath10k_hif_ops ath10k_pci_hif_ops = { |
| 1739 | .send_head = ath10k_pci_hif_send_head, |
| 1740 | .exchange_bmi_msg = ath10k_pci_hif_exchange_bmi_msg, |
| 1741 | .start = ath10k_pci_hif_start, |
| 1742 | .stop = ath10k_pci_hif_stop, |
| 1743 | .map_service_to_pipe = ath10k_pci_hif_map_service_to_pipe, |
| 1744 | .get_default_pipe = ath10k_pci_hif_get_default_pipe, |
| 1745 | .send_complete_check = ath10k_pci_hif_send_complete_check, |
| 1746 | .init = ath10k_pci_hif_post_init, |
| 1747 | .get_free_queue_number = ath10k_pci_hif_get_free_queue_number, |
| 1748 | }; |
| 1749 | |
| 1750 | static void ath10k_pci_ce_tasklet(unsigned long ptr) |
| 1751 | { |
| 1752 | struct hif_ce_pipe_info *pipe = (struct hif_ce_pipe_info *)ptr; |
| 1753 | struct ath10k_pci *ar_pci = pipe->ar_pci; |
| 1754 | |
| 1755 | ath10k_ce_per_engine_service(ar_pci->ar, pipe->pipe_num); |
| 1756 | } |
| 1757 | |
| 1758 | static void ath10k_msi_err_tasklet(unsigned long data) |
| 1759 | { |
| 1760 | struct ath10k *ar = (struct ath10k *)data; |
| 1761 | |
| 1762 | ath10k_pci_fw_interrupt_handler(ar); |
| 1763 | } |
| 1764 | |
| 1765 | /* |
| 1766 | * Handler for a per-engine interrupt on a PARTICULAR CE. |
| 1767 | * This is used in cases where each CE has a private MSI interrupt. |
| 1768 | */ |
| 1769 | static irqreturn_t ath10k_pci_per_engine_handler(int irq, void *arg) |
| 1770 | { |
| 1771 | struct ath10k *ar = arg; |
| 1772 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1773 | int ce_id = irq - ar_pci->pdev->irq - MSI_ASSIGN_CE_INITIAL; |
| 1774 | |
Dan Carpenter | e574267 | 2013-06-18 10:28:46 +0300 | [diff] [blame] | 1775 | if (ce_id < 0 || ce_id >= ARRAY_SIZE(ar_pci->pipe_info)) { |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 1776 | ath10k_warn("unexpected/invalid irq %d ce_id %d\n", irq, ce_id); |
| 1777 | return IRQ_HANDLED; |
| 1778 | } |
| 1779 | |
| 1780 | /* |
| 1781 | * NOTE: We are able to derive ce_id from irq because we |
| 1782 | * use a one-to-one mapping for CE's 0..5. |
| 1783 | * CE's 6 & 7 do not use interrupts at all. |
| 1784 | * |
| 1785 | * This mapping must be kept in sync with the mapping |
| 1786 | * used by firmware. |
| 1787 | */ |
| 1788 | tasklet_schedule(&ar_pci->pipe_info[ce_id].intr); |
| 1789 | return IRQ_HANDLED; |
| 1790 | } |
| 1791 | |
| 1792 | static irqreturn_t ath10k_pci_msi_fw_handler(int irq, void *arg) |
| 1793 | { |
| 1794 | struct ath10k *ar = arg; |
| 1795 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1796 | |
| 1797 | tasklet_schedule(&ar_pci->msi_fw_err); |
| 1798 | return IRQ_HANDLED; |
| 1799 | } |
| 1800 | |
| 1801 | /* |
| 1802 | * Top-level interrupt handler for all PCI interrupts from a Target. |
| 1803 | * When a block of MSI interrupts is allocated, this top-level handler |
| 1804 | * is not used; instead, we directly call the correct sub-handler. |
| 1805 | */ |
| 1806 | static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg) |
| 1807 | { |
| 1808 | struct ath10k *ar = arg; |
| 1809 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1810 | |
| 1811 | if (ar_pci->num_msi_intrs == 0) { |
| 1812 | /* |
| 1813 | * IMPORTANT: INTR_CLR regiser has to be set after |
| 1814 | * INTR_ENABLE is set to 0, otherwise interrupt can not be |
| 1815 | * really cleared. |
| 1816 | */ |
| 1817 | iowrite32(0, ar_pci->mem + |
| 1818 | (SOC_CORE_BASE_ADDRESS | |
| 1819 | PCIE_INTR_ENABLE_ADDRESS)); |
| 1820 | iowrite32(PCIE_INTR_FIRMWARE_MASK | |
| 1821 | PCIE_INTR_CE_MASK_ALL, |
| 1822 | ar_pci->mem + (SOC_CORE_BASE_ADDRESS | |
| 1823 | PCIE_INTR_CLR_ADDRESS)); |
| 1824 | /* |
| 1825 | * IMPORTANT: this extra read transaction is required to |
| 1826 | * flush the posted write buffer. |
| 1827 | */ |
| 1828 | (void) ioread32(ar_pci->mem + |
| 1829 | (SOC_CORE_BASE_ADDRESS | |
| 1830 | PCIE_INTR_ENABLE_ADDRESS)); |
| 1831 | } |
| 1832 | |
| 1833 | tasklet_schedule(&ar_pci->intr_tq); |
| 1834 | |
| 1835 | return IRQ_HANDLED; |
| 1836 | } |
| 1837 | |
| 1838 | static void ath10k_pci_tasklet(unsigned long data) |
| 1839 | { |
| 1840 | struct ath10k *ar = (struct ath10k *)data; |
| 1841 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1842 | |
| 1843 | ath10k_pci_fw_interrupt_handler(ar); /* FIXME: Handle FW error */ |
| 1844 | ath10k_ce_per_engine_service_any(ar); |
| 1845 | |
| 1846 | if (ar_pci->num_msi_intrs == 0) { |
| 1847 | /* Enable Legacy PCI line interrupts */ |
| 1848 | iowrite32(PCIE_INTR_FIRMWARE_MASK | |
| 1849 | PCIE_INTR_CE_MASK_ALL, |
| 1850 | ar_pci->mem + (SOC_CORE_BASE_ADDRESS | |
| 1851 | PCIE_INTR_ENABLE_ADDRESS)); |
| 1852 | /* |
| 1853 | * IMPORTANT: this extra read transaction is required to |
| 1854 | * flush the posted write buffer |
| 1855 | */ |
| 1856 | (void) ioread32(ar_pci->mem + |
| 1857 | (SOC_CORE_BASE_ADDRESS | |
| 1858 | PCIE_INTR_ENABLE_ADDRESS)); |
| 1859 | } |
| 1860 | } |
| 1861 | |
| 1862 | static int ath10k_pci_start_intr_msix(struct ath10k *ar, int num) |
| 1863 | { |
| 1864 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1865 | int ret; |
| 1866 | int i; |
| 1867 | |
| 1868 | ret = pci_enable_msi_block(ar_pci->pdev, num); |
| 1869 | if (ret) |
| 1870 | return ret; |
| 1871 | |
| 1872 | ret = request_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW, |
| 1873 | ath10k_pci_msi_fw_handler, |
| 1874 | IRQF_SHARED, "ath10k_pci", ar); |
| 1875 | if (ret) |
| 1876 | return ret; |
| 1877 | |
| 1878 | for (i = MSI_ASSIGN_CE_INITIAL; i <= MSI_ASSIGN_CE_MAX; i++) { |
| 1879 | ret = request_irq(ar_pci->pdev->irq + i, |
| 1880 | ath10k_pci_per_engine_handler, |
| 1881 | IRQF_SHARED, "ath10k_pci", ar); |
| 1882 | if (ret) { |
| 1883 | ath10k_warn("request_irq(%d) failed %d\n", |
| 1884 | ar_pci->pdev->irq + i, ret); |
| 1885 | |
Michal Kazior | 87b1423 | 2013-06-26 08:50:50 +0200 | [diff] [blame^] | 1886 | for (i--; i >= MSI_ASSIGN_CE_INITIAL; i--) |
| 1887 | free_irq(ar_pci->pdev->irq + i, ar); |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 1888 | |
Michal Kazior | 87b1423 | 2013-06-26 08:50:50 +0200 | [diff] [blame^] | 1889 | free_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW, ar); |
Kalle Valo | 5e3dd15 | 2013-06-12 20:52:10 +0300 | [diff] [blame] | 1890 | pci_disable_msi(ar_pci->pdev); |
| 1891 | return ret; |
| 1892 | } |
| 1893 | } |
| 1894 | |
| 1895 | ath10k_info("MSI-X interrupt handling (%d intrs)\n", num); |
| 1896 | return 0; |
| 1897 | } |
| 1898 | |
| 1899 | static int ath10k_pci_start_intr_msi(struct ath10k *ar) |
| 1900 | { |
| 1901 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1902 | int ret; |
| 1903 | |
| 1904 | ret = pci_enable_msi(ar_pci->pdev); |
| 1905 | if (ret < 0) |
| 1906 | return ret; |
| 1907 | |
| 1908 | ret = request_irq(ar_pci->pdev->irq, |
| 1909 | ath10k_pci_interrupt_handler, |
| 1910 | IRQF_SHARED, "ath10k_pci", ar); |
| 1911 | if (ret < 0) { |
| 1912 | pci_disable_msi(ar_pci->pdev); |
| 1913 | return ret; |
| 1914 | } |
| 1915 | |
| 1916 | ath10k_info("MSI interrupt handling\n"); |
| 1917 | return 0; |
| 1918 | } |
| 1919 | |
| 1920 | static int ath10k_pci_start_intr_legacy(struct ath10k *ar) |
| 1921 | { |
| 1922 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1923 | int ret; |
| 1924 | |
| 1925 | ret = request_irq(ar_pci->pdev->irq, |
| 1926 | ath10k_pci_interrupt_handler, |
| 1927 | IRQF_SHARED, "ath10k_pci", ar); |
| 1928 | if (ret < 0) |
| 1929 | return ret; |
| 1930 | |
| 1931 | /* |
| 1932 | * Make sure to wake the Target before enabling Legacy |
| 1933 | * Interrupt. |
| 1934 | */ |
| 1935 | iowrite32(PCIE_SOC_WAKE_V_MASK, |
| 1936 | ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS + |
| 1937 | PCIE_SOC_WAKE_ADDRESS); |
| 1938 | |
| 1939 | ath10k_pci_wait(ar); |
| 1940 | |
| 1941 | /* |
| 1942 | * A potential race occurs here: The CORE_BASE write |
| 1943 | * depends on target correctly decoding AXI address but |
| 1944 | * host won't know when target writes BAR to CORE_CTRL. |
| 1945 | * This write might get lost if target has NOT written BAR. |
| 1946 | * For now, fix the race by repeating the write in below |
| 1947 | * synchronization checking. |
| 1948 | */ |
| 1949 | iowrite32(PCIE_INTR_FIRMWARE_MASK | |
| 1950 | PCIE_INTR_CE_MASK_ALL, |
| 1951 | ar_pci->mem + (SOC_CORE_BASE_ADDRESS | |
| 1952 | PCIE_INTR_ENABLE_ADDRESS)); |
| 1953 | iowrite32(PCIE_SOC_WAKE_RESET, |
| 1954 | ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS + |
| 1955 | PCIE_SOC_WAKE_ADDRESS); |
| 1956 | |
| 1957 | ath10k_info("legacy interrupt handling\n"); |
| 1958 | return 0; |
| 1959 | } |
| 1960 | |
| 1961 | static int ath10k_pci_start_intr(struct ath10k *ar) |
| 1962 | { |
| 1963 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 1964 | int num = MSI_NUM_REQUEST; |
| 1965 | int ret; |
| 1966 | int i; |
| 1967 | |
| 1968 | tasklet_init(&ar_pci->intr_tq, ath10k_pci_tasklet, (unsigned long) ar); |
| 1969 | tasklet_init(&ar_pci->msi_fw_err, ath10k_msi_err_tasklet, |
| 1970 | (unsigned long) ar); |
| 1971 | |
| 1972 | for (i = 0; i < CE_COUNT; i++) { |
| 1973 | ar_pci->pipe_info[i].ar_pci = ar_pci; |
| 1974 | tasklet_init(&ar_pci->pipe_info[i].intr, |
| 1975 | ath10k_pci_ce_tasklet, |
| 1976 | (unsigned long)&ar_pci->pipe_info[i]); |
| 1977 | } |
| 1978 | |
| 1979 | if (!test_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features)) |
| 1980 | num = 1; |
| 1981 | |
| 1982 | if (num > 1) { |
| 1983 | ret = ath10k_pci_start_intr_msix(ar, num); |
| 1984 | if (ret == 0) |
| 1985 | goto exit; |
| 1986 | |
| 1987 | ath10k_warn("MSI-X didn't succeed (%d), trying MSI\n", ret); |
| 1988 | num = 1; |
| 1989 | } |
| 1990 | |
| 1991 | if (num == 1) { |
| 1992 | ret = ath10k_pci_start_intr_msi(ar); |
| 1993 | if (ret == 0) |
| 1994 | goto exit; |
| 1995 | |
| 1996 | ath10k_warn("MSI didn't succeed (%d), trying legacy INTR\n", |
| 1997 | ret); |
| 1998 | num = 0; |
| 1999 | } |
| 2000 | |
| 2001 | ret = ath10k_pci_start_intr_legacy(ar); |
| 2002 | |
| 2003 | exit: |
| 2004 | ar_pci->num_msi_intrs = num; |
| 2005 | ar_pci->ce_count = CE_COUNT; |
| 2006 | return ret; |
| 2007 | } |
| 2008 | |
| 2009 | static void ath10k_pci_stop_intr(struct ath10k *ar) |
| 2010 | { |
| 2011 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 2012 | int i; |
| 2013 | |
| 2014 | /* There's at least one interrupt irregardless whether its legacy INTR |
| 2015 | * or MSI or MSI-X */ |
| 2016 | for (i = 0; i < max(1, ar_pci->num_msi_intrs); i++) |
| 2017 | free_irq(ar_pci->pdev->irq + i, ar); |
| 2018 | |
| 2019 | if (ar_pci->num_msi_intrs > 0) |
| 2020 | pci_disable_msi(ar_pci->pdev); |
| 2021 | } |
| 2022 | |
| 2023 | static int ath10k_pci_reset_target(struct ath10k *ar) |
| 2024 | { |
| 2025 | struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| 2026 | int wait_limit = 300; /* 3 sec */ |
| 2027 | |
| 2028 | /* Wait for Target to finish initialization before we proceed. */ |
| 2029 | iowrite32(PCIE_SOC_WAKE_V_MASK, |
| 2030 | ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS + |
| 2031 | PCIE_SOC_WAKE_ADDRESS); |
| 2032 | |
| 2033 | ath10k_pci_wait(ar); |
| 2034 | |
| 2035 | while (wait_limit-- && |
| 2036 | !(ioread32(ar_pci->mem + FW_INDICATOR_ADDRESS) & |
| 2037 | FW_IND_INITIALIZED)) { |
| 2038 | if (ar_pci->num_msi_intrs == 0) |
| 2039 | /* Fix potential race by repeating CORE_BASE writes */ |
| 2040 | iowrite32(PCIE_INTR_FIRMWARE_MASK | |
| 2041 | PCIE_INTR_CE_MASK_ALL, |
| 2042 | ar_pci->mem + (SOC_CORE_BASE_ADDRESS | |
| 2043 | PCIE_INTR_ENABLE_ADDRESS)); |
| 2044 | mdelay(10); |
| 2045 | } |
| 2046 | |
| 2047 | if (wait_limit < 0) { |
| 2048 | ath10k_err("Target stalled\n"); |
| 2049 | iowrite32(PCIE_SOC_WAKE_RESET, |
| 2050 | ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS + |
| 2051 | PCIE_SOC_WAKE_ADDRESS); |
| 2052 | return -EIO; |
| 2053 | } |
| 2054 | |
| 2055 | iowrite32(PCIE_SOC_WAKE_RESET, |
| 2056 | ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS + |
| 2057 | PCIE_SOC_WAKE_ADDRESS); |
| 2058 | |
| 2059 | return 0; |
| 2060 | } |
| 2061 | |
| 2062 | static void ath10k_pci_device_reset(struct ath10k_pci *ar_pci) |
| 2063 | { |
| 2064 | struct ath10k *ar = ar_pci->ar; |
| 2065 | void __iomem *mem = ar_pci->mem; |
| 2066 | int i; |
| 2067 | u32 val; |
| 2068 | |
| 2069 | if (!SOC_GLOBAL_RESET_ADDRESS) |
| 2070 | return; |
| 2071 | |
| 2072 | if (!mem) |
| 2073 | return; |
| 2074 | |
| 2075 | ath10k_pci_reg_write32(mem, PCIE_SOC_WAKE_ADDRESS, |
| 2076 | PCIE_SOC_WAKE_V_MASK); |
| 2077 | for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { |
| 2078 | if (ath10k_pci_target_is_awake(ar)) |
| 2079 | break; |
| 2080 | msleep(1); |
| 2081 | } |
| 2082 | |
| 2083 | /* Put Target, including PCIe, into RESET. */ |
| 2084 | val = ath10k_pci_reg_read32(mem, SOC_GLOBAL_RESET_ADDRESS); |
| 2085 | val |= 1; |
| 2086 | ath10k_pci_reg_write32(mem, SOC_GLOBAL_RESET_ADDRESS, val); |
| 2087 | |
| 2088 | for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { |
| 2089 | if (ath10k_pci_reg_read32(mem, RTC_STATE_ADDRESS) & |
| 2090 | RTC_STATE_COLD_RESET_MASK) |
| 2091 | break; |
| 2092 | msleep(1); |
| 2093 | } |
| 2094 | |
| 2095 | /* Pull Target, including PCIe, out of RESET. */ |
| 2096 | val &= ~1; |
| 2097 | ath10k_pci_reg_write32(mem, SOC_GLOBAL_RESET_ADDRESS, val); |
| 2098 | |
| 2099 | for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { |
| 2100 | if (!(ath10k_pci_reg_read32(mem, RTC_STATE_ADDRESS) & |
| 2101 | RTC_STATE_COLD_RESET_MASK)) |
| 2102 | break; |
| 2103 | msleep(1); |
| 2104 | } |
| 2105 | |
| 2106 | ath10k_pci_reg_write32(mem, PCIE_SOC_WAKE_ADDRESS, PCIE_SOC_WAKE_RESET); |
| 2107 | } |
| 2108 | |
| 2109 | static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci) |
| 2110 | { |
| 2111 | int i; |
| 2112 | |
| 2113 | for (i = 0; i < ATH10K_PCI_FEATURE_COUNT; i++) { |
| 2114 | if (!test_bit(i, ar_pci->features)) |
| 2115 | continue; |
| 2116 | |
| 2117 | switch (i) { |
| 2118 | case ATH10K_PCI_FEATURE_MSI_X: |
| 2119 | ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n"); |
| 2120 | break; |
| 2121 | case ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND: |
| 2122 | ath10k_dbg(ATH10K_DBG_PCI, "QCA988X_1.0 workaround enabled\n"); |
| 2123 | break; |
| 2124 | } |
| 2125 | } |
| 2126 | } |
| 2127 | |
| 2128 | static int ath10k_pci_probe(struct pci_dev *pdev, |
| 2129 | const struct pci_device_id *pci_dev) |
| 2130 | { |
| 2131 | void __iomem *mem; |
| 2132 | int ret = 0; |
| 2133 | struct ath10k *ar; |
| 2134 | struct ath10k_pci *ar_pci; |
| 2135 | u32 lcr_val; |
| 2136 | |
| 2137 | ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| 2138 | |
| 2139 | ar_pci = kzalloc(sizeof(*ar_pci), GFP_KERNEL); |
| 2140 | if (ar_pci == NULL) |
| 2141 | return -ENOMEM; |
| 2142 | |
| 2143 | ar_pci->pdev = pdev; |
| 2144 | ar_pci->dev = &pdev->dev; |
| 2145 | |
| 2146 | switch (pci_dev->device) { |
| 2147 | case QCA988X_1_0_DEVICE_ID: |
| 2148 | set_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features); |
| 2149 | break; |
| 2150 | case QCA988X_2_0_DEVICE_ID: |
| 2151 | set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features); |
| 2152 | break; |
| 2153 | default: |
| 2154 | ret = -ENODEV; |
| 2155 | ath10k_err("Unkown device ID: %d\n", pci_dev->device); |
| 2156 | goto err_ar_pci; |
| 2157 | } |
| 2158 | |
| 2159 | ath10k_pci_dump_features(ar_pci); |
| 2160 | |
| 2161 | ar = ath10k_core_create(ar_pci, ar_pci->dev, ATH10K_BUS_PCI, |
| 2162 | &ath10k_pci_hif_ops); |
| 2163 | if (!ar) { |
| 2164 | ath10k_err("ath10k_core_create failed!\n"); |
| 2165 | ret = -EINVAL; |
| 2166 | goto err_ar_pci; |
| 2167 | } |
| 2168 | |
| 2169 | /* Enable QCA988X_1.0 HW workarounds */ |
| 2170 | if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WARKAROUND, ar_pci->features)) |
| 2171 | spin_lock_init(&ar_pci->hw_v1_workaround_lock); |
| 2172 | |
| 2173 | ar_pci->ar = ar; |
| 2174 | ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS; |
| 2175 | atomic_set(&ar_pci->keep_awake_count, 0); |
| 2176 | |
| 2177 | pci_set_drvdata(pdev, ar); |
| 2178 | |
| 2179 | /* |
| 2180 | * Without any knowledge of the Host, the Target may have been reset or |
| 2181 | * power cycled and its Config Space may no longer reflect the PCI |
| 2182 | * address space that was assigned earlier by the PCI infrastructure. |
| 2183 | * Refresh it now. |
| 2184 | */ |
| 2185 | ret = pci_assign_resource(pdev, BAR_NUM); |
| 2186 | if (ret) { |
| 2187 | ath10k_err("cannot assign PCI space: %d\n", ret); |
| 2188 | goto err_ar; |
| 2189 | } |
| 2190 | |
| 2191 | ret = pci_enable_device(pdev); |
| 2192 | if (ret) { |
| 2193 | ath10k_err("cannot enable PCI device: %d\n", ret); |
| 2194 | goto err_ar; |
| 2195 | } |
| 2196 | |
| 2197 | /* Request MMIO resources */ |
| 2198 | ret = pci_request_region(pdev, BAR_NUM, "ath"); |
| 2199 | if (ret) { |
| 2200 | ath10k_err("PCI MMIO reservation error: %d\n", ret); |
| 2201 | goto err_device; |
| 2202 | } |
| 2203 | |
| 2204 | /* |
| 2205 | * Target structures have a limit of 32 bit DMA pointers. |
| 2206 | * DMA pointers can be wider than 32 bits by default on some systems. |
| 2207 | */ |
| 2208 | ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| 2209 | if (ret) { |
| 2210 | ath10k_err("32-bit DMA not available: %d\n", ret); |
| 2211 | goto err_region; |
| 2212 | } |
| 2213 | |
| 2214 | ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| 2215 | if (ret) { |
| 2216 | ath10k_err("cannot enable 32-bit consistent DMA\n"); |
| 2217 | goto err_region; |
| 2218 | } |
| 2219 | |
| 2220 | /* Set bus master bit in PCI_COMMAND to enable DMA */ |
| 2221 | pci_set_master(pdev); |
| 2222 | |
| 2223 | /* |
| 2224 | * Temporary FIX: disable ASPM |
| 2225 | * Will be removed after the OTP is programmed |
| 2226 | */ |
| 2227 | pci_read_config_dword(pdev, 0x80, &lcr_val); |
| 2228 | pci_write_config_dword(pdev, 0x80, (lcr_val & 0xffffff00)); |
| 2229 | |
| 2230 | /* Arrange for access to Target SoC registers. */ |
| 2231 | mem = pci_iomap(pdev, BAR_NUM, 0); |
| 2232 | if (!mem) { |
| 2233 | ath10k_err("PCI iomap error\n"); |
| 2234 | ret = -EIO; |
| 2235 | goto err_master; |
| 2236 | } |
| 2237 | |
| 2238 | ar_pci->mem = mem; |
| 2239 | |
| 2240 | spin_lock_init(&ar_pci->ce_lock); |
| 2241 | |
| 2242 | ar_pci->cacheline_sz = dma_get_cache_alignment(); |
| 2243 | |
| 2244 | ret = ath10k_pci_start_intr(ar); |
| 2245 | if (ret) { |
| 2246 | ath10k_err("could not start interrupt handling (%d)\n", ret); |
| 2247 | goto err_iomap; |
| 2248 | } |
| 2249 | |
| 2250 | /* |
| 2251 | * Bring the target up cleanly. |
| 2252 | * |
| 2253 | * The target may be in an undefined state with an AUX-powered Target |
| 2254 | * and a Host in WoW mode. If the Host crashes, loses power, or is |
| 2255 | * restarted (without unloading the driver) then the Target is left |
| 2256 | * (aux) powered and running. On a subsequent driver load, the Target |
| 2257 | * is in an unexpected state. We try to catch that here in order to |
| 2258 | * reset the Target and retry the probe. |
| 2259 | */ |
| 2260 | ath10k_pci_device_reset(ar_pci); |
| 2261 | |
| 2262 | ret = ath10k_pci_reset_target(ar); |
| 2263 | if (ret) |
| 2264 | goto err_intr; |
| 2265 | |
| 2266 | if (ath10k_target_ps) { |
| 2267 | ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save enabled\n"); |
| 2268 | } else { |
| 2269 | /* Force AWAKE forever */ |
| 2270 | ath10k_dbg(ATH10K_DBG_PCI, "on-chip power save disabled\n"); |
| 2271 | ath10k_do_pci_wake(ar); |
| 2272 | } |
| 2273 | |
| 2274 | ret = ath10k_pci_ce_init(ar); |
| 2275 | if (ret) |
| 2276 | goto err_intr; |
| 2277 | |
| 2278 | ret = ath10k_pci_init_config(ar); |
| 2279 | if (ret) |
| 2280 | goto err_ce; |
| 2281 | |
| 2282 | ret = ath10k_pci_wake_target_cpu(ar); |
| 2283 | if (ret) { |
| 2284 | ath10k_err("could not wake up target CPU (%d)\n", ret); |
| 2285 | goto err_ce; |
| 2286 | } |
| 2287 | |
| 2288 | ret = ath10k_core_register(ar); |
| 2289 | if (ret) { |
| 2290 | ath10k_err("could not register driver core (%d)\n", ret); |
| 2291 | goto err_ce; |
| 2292 | } |
| 2293 | |
| 2294 | return 0; |
| 2295 | |
| 2296 | err_ce: |
| 2297 | ath10k_pci_ce_deinit(ar); |
| 2298 | err_intr: |
| 2299 | ath10k_pci_stop_intr(ar); |
| 2300 | err_iomap: |
| 2301 | pci_iounmap(pdev, mem); |
| 2302 | err_master: |
| 2303 | pci_clear_master(pdev); |
| 2304 | err_region: |
| 2305 | pci_release_region(pdev, BAR_NUM); |
| 2306 | err_device: |
| 2307 | pci_disable_device(pdev); |
| 2308 | err_ar: |
| 2309 | pci_set_drvdata(pdev, NULL); |
| 2310 | ath10k_core_destroy(ar); |
| 2311 | err_ar_pci: |
| 2312 | /* call HIF PCI free here */ |
| 2313 | kfree(ar_pci); |
| 2314 | |
| 2315 | return ret; |
| 2316 | } |
| 2317 | |
| 2318 | static void ath10k_pci_remove(struct pci_dev *pdev) |
| 2319 | { |
| 2320 | struct ath10k *ar = pci_get_drvdata(pdev); |
| 2321 | struct ath10k_pci *ar_pci; |
| 2322 | |
| 2323 | ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| 2324 | |
| 2325 | if (!ar) |
| 2326 | return; |
| 2327 | |
| 2328 | ar_pci = ath10k_pci_priv(ar); |
| 2329 | |
| 2330 | if (!ar_pci) |
| 2331 | return; |
| 2332 | |
| 2333 | tasklet_kill(&ar_pci->msi_fw_err); |
| 2334 | |
| 2335 | ath10k_core_unregister(ar); |
| 2336 | ath10k_pci_stop_intr(ar); |
| 2337 | |
| 2338 | pci_set_drvdata(pdev, NULL); |
| 2339 | pci_iounmap(pdev, ar_pci->mem); |
| 2340 | pci_release_region(pdev, BAR_NUM); |
| 2341 | pci_clear_master(pdev); |
| 2342 | pci_disable_device(pdev); |
| 2343 | |
| 2344 | ath10k_core_destroy(ar); |
| 2345 | kfree(ar_pci); |
| 2346 | } |
| 2347 | |
| 2348 | #if defined(CONFIG_PM_SLEEP) |
| 2349 | |
| 2350 | #define ATH10K_PCI_PM_CONTROL 0x44 |
| 2351 | |
| 2352 | static int ath10k_pci_suspend(struct device *device) |
| 2353 | { |
| 2354 | struct pci_dev *pdev = to_pci_dev(device); |
| 2355 | struct ath10k *ar = pci_get_drvdata(pdev); |
| 2356 | struct ath10k_pci *ar_pci; |
| 2357 | u32 val; |
| 2358 | int ret, retval; |
| 2359 | |
| 2360 | ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| 2361 | |
| 2362 | if (!ar) |
| 2363 | return -ENODEV; |
| 2364 | |
| 2365 | ar_pci = ath10k_pci_priv(ar); |
| 2366 | if (!ar_pci) |
| 2367 | return -ENODEV; |
| 2368 | |
| 2369 | if (ath10k_core_target_suspend(ar)) |
| 2370 | return -EBUSY; |
| 2371 | |
| 2372 | ret = wait_event_interruptible_timeout(ar->event_queue, |
| 2373 | ar->is_target_paused == true, |
| 2374 | 1 * HZ); |
| 2375 | if (ret < 0) { |
| 2376 | ath10k_warn("suspend interrupted (%d)\n", ret); |
| 2377 | retval = ret; |
| 2378 | goto resume; |
| 2379 | } else if (ret == 0) { |
| 2380 | ath10k_warn("suspend timed out - target pause event never came\n"); |
| 2381 | retval = EIO; |
| 2382 | goto resume; |
| 2383 | } |
| 2384 | |
| 2385 | /* |
| 2386 | * reset is_target_paused and host can check that in next time, |
| 2387 | * or it will always be TRUE and host just skip the waiting |
| 2388 | * condition, it causes target assert due to host already |
| 2389 | * suspend |
| 2390 | */ |
| 2391 | ar->is_target_paused = false; |
| 2392 | |
| 2393 | pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val); |
| 2394 | |
| 2395 | if ((val & 0x000000ff) != 0x3) { |
| 2396 | pci_save_state(pdev); |
| 2397 | pci_disable_device(pdev); |
| 2398 | pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL, |
| 2399 | (val & 0xffffff00) | 0x03); |
| 2400 | } |
| 2401 | |
| 2402 | return 0; |
| 2403 | resume: |
| 2404 | ret = ath10k_core_target_resume(ar); |
| 2405 | if (ret) |
| 2406 | ath10k_warn("could not resume (%d)\n", ret); |
| 2407 | |
| 2408 | return retval; |
| 2409 | } |
| 2410 | |
| 2411 | static int ath10k_pci_resume(struct device *device) |
| 2412 | { |
| 2413 | struct pci_dev *pdev = to_pci_dev(device); |
| 2414 | struct ath10k *ar = pci_get_drvdata(pdev); |
| 2415 | struct ath10k_pci *ar_pci; |
| 2416 | int ret; |
| 2417 | u32 val; |
| 2418 | |
| 2419 | ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| 2420 | |
| 2421 | if (!ar) |
| 2422 | return -ENODEV; |
| 2423 | ar_pci = ath10k_pci_priv(ar); |
| 2424 | |
| 2425 | if (!ar_pci) |
| 2426 | return -ENODEV; |
| 2427 | |
| 2428 | ret = pci_enable_device(pdev); |
| 2429 | if (ret) { |
| 2430 | ath10k_warn("cannot enable PCI device: %d\n", ret); |
| 2431 | return ret; |
| 2432 | } |
| 2433 | |
| 2434 | pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val); |
| 2435 | |
| 2436 | if ((val & 0x000000ff) != 0) { |
| 2437 | pci_restore_state(pdev); |
| 2438 | pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL, |
| 2439 | val & 0xffffff00); |
| 2440 | /* |
| 2441 | * Suspend/Resume resets the PCI configuration space, |
| 2442 | * so we have to re-disable the RETRY_TIMEOUT register (0x41) |
| 2443 | * to keep PCI Tx retries from interfering with C3 CPU state |
| 2444 | */ |
| 2445 | pci_read_config_dword(pdev, 0x40, &val); |
| 2446 | |
| 2447 | if ((val & 0x0000ff00) != 0) |
| 2448 | pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); |
| 2449 | } |
| 2450 | |
| 2451 | ret = ath10k_core_target_resume(ar); |
| 2452 | if (ret) |
| 2453 | ath10k_warn("target resume failed: %d\n", ret); |
| 2454 | |
| 2455 | return ret; |
| 2456 | } |
| 2457 | |
| 2458 | static SIMPLE_DEV_PM_OPS(ath10k_dev_pm_ops, |
| 2459 | ath10k_pci_suspend, |
| 2460 | ath10k_pci_resume); |
| 2461 | |
| 2462 | #define ATH10K_PCI_PM_OPS (&ath10k_dev_pm_ops) |
| 2463 | |
| 2464 | #else |
| 2465 | |
| 2466 | #define ATH10K_PCI_PM_OPS NULL |
| 2467 | |
| 2468 | #endif /* CONFIG_PM_SLEEP */ |
| 2469 | |
| 2470 | MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table); |
| 2471 | |
| 2472 | static struct pci_driver ath10k_pci_driver = { |
| 2473 | .name = "ath10k_pci", |
| 2474 | .id_table = ath10k_pci_id_table, |
| 2475 | .probe = ath10k_pci_probe, |
| 2476 | .remove = ath10k_pci_remove, |
| 2477 | .driver.pm = ATH10K_PCI_PM_OPS, |
| 2478 | }; |
| 2479 | |
| 2480 | static int __init ath10k_pci_init(void) |
| 2481 | { |
| 2482 | int ret; |
| 2483 | |
| 2484 | ret = pci_register_driver(&ath10k_pci_driver); |
| 2485 | if (ret) |
| 2486 | ath10k_err("pci_register_driver failed [%d]\n", ret); |
| 2487 | |
| 2488 | return ret; |
| 2489 | } |
| 2490 | module_init(ath10k_pci_init); |
| 2491 | |
| 2492 | static void __exit ath10k_pci_exit(void) |
| 2493 | { |
| 2494 | pci_unregister_driver(&ath10k_pci_driver); |
| 2495 | } |
| 2496 | |
| 2497 | module_exit(ath10k_pci_exit); |
| 2498 | |
| 2499 | MODULE_AUTHOR("Qualcomm Atheros"); |
| 2500 | MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices"); |
| 2501 | MODULE_LICENSE("Dual BSD/GPL"); |
| 2502 | MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_FW_FILE); |
| 2503 | MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_OTP_FILE); |
| 2504 | MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_BOARD_DATA_FILE); |
| 2505 | MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE); |
| 2506 | MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE); |
| 2507 | MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE); |