drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c

/*
 * Copyright (c) 2010 Broadcom Corporation
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
/* ****************** SDIO CARD Interface Functions **************************/

#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/sched.h>
#include <linux/completion.h>
#include <linux/scatterlist.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/core.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/platform_data/brcmfmac-sdio.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <net/cfg80211.h>

#include <defs.h>
#include <brcm_hw_ids.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
#include <soc.h>
#include "dhd_bus.h"
#include "dhd_dbg.h"
#include "sdio_host.h"

#define SDIOH_API_ACCESS_RETRY_LIMIT	2

#define DMA_ALIGN_MASK	0x03

#define SDIO_FUNC1_BLOCKSIZE		64
#define SDIO_FUNC2_BLOCKSIZE		512
/* Maximum milliseconds to wait for F2 to come up */
#define SDIO_WAIT_F2RDY	3000


static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id)
{
	struct brcmf_bus *bus_if = dev_get_drvdata(dev_id);
	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;

	brcmf_dbg(INTR, "OOB intr triggered\n");

	/* out-of-band interrupt is level-triggered which won't
	 * be cleared until dpc
	 */
	if (sdiodev->irq_en) {
		disable_irq_nosync(irq);
		sdiodev->irq_en = false;
	}

	brcmf_sdio_isr(sdiodev->bus);

	return IRQ_HANDLED;
}

static void brcmf_sdiod_ib_irqhandler(struct sdio_func *func)
{
	struct brcmf_bus *bus_if = dev_get_drvdata(&func->dev);
	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;

	brcmf_dbg(INTR, "IB intr triggered\n");

	brcmf_sdio_isr(sdiodev->bus);
}

/* dummy handler for SDIO function 2 interrupt */
static void brcmf_sdiod_dummy_irqhandler(struct sdio_func *func)
{
}

static bool brcmf_sdiod_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
{
	bool is_err = false;
#ifdef CONFIG_PM_SLEEP
	is_err = atomic_read(&sdiodev->suspend);
#endif
	return is_err;
}

static void brcmf_sdiod_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
				       wait_queue_head_t *wq)
{
#ifdef CONFIG_PM_SLEEP
	int retry = 0;
	while (atomic_read(&sdiodev->suspend) && retry++ != 30)
		wait_event_timeout(*wq, false, HZ/100);
#endif
}

int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
{
	int ret = 0;
	u8 data;
	unsigned long flags;

	if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
		brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
			  sdiodev->pdata->oob_irq_nr);
		ret = request_irq(sdiodev->pdata->oob_irq_nr,
				  brcmf_sdiod_oob_irqhandler,
				  sdiodev->pdata->oob_irq_flags,
				  "brcmf_oob_intr",
				  &sdiodev->func[1]->dev);
		if (ret != 0) {
			brcmf_err("request_irq failed %d\n", ret);
			return ret;
		}
		sdiodev->oob_irq_requested = true;
		spin_lock_init(&sdiodev->irq_en_lock);
		spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
		sdiodev->irq_en = true;
		spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);

		ret = enable_irq_wake(sdiodev->pdata->oob_irq_nr);
		if (ret != 0) {
			brcmf_err("enable_irq_wake failed %d\n", ret);
			return ret;
		}
		sdiodev->irq_wake = true;

		sdio_claim_host(sdiodev->func[1]);

		/* must configure SDIO_CCCR_IENx to enable irq */
		data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
		data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);

		/* redirect, configure and enable io for interrupt signal */
		data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
		if (sdiodev->pdata->oob_irq_flags & IRQF_TRIGGER_HIGH)
			data |= SDIO_SEPINT_ACT_HI;
		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);

		sdio_release_host(sdiodev->func[1]);
	} else {
		brcmf_dbg(SDIO, "Entering\n");
		sdio_claim_host(sdiodev->func[1]);
		sdio_claim_irq(sdiodev->func[1], brcmf_sdiod_ib_irqhandler);
		sdio_claim_irq(sdiodev->func[2], brcmf_sdiod_dummy_irqhandler);
		sdio_release_host(sdiodev->func[1]);
	}

	return 0;
}

int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
{
	brcmf_dbg(SDIO, "Entering\n");

	if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) {
		sdio_claim_host(sdiodev->func[1]);
		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
		sdio_release_host(sdiodev->func[1]);

		if (sdiodev->oob_irq_requested) {
			sdiodev->oob_irq_requested = false;
			if (sdiodev->irq_wake) {
				disable_irq_wake(sdiodev->pdata->oob_irq_nr);
				sdiodev->irq_wake = false;
			}
			free_irq(sdiodev->pdata->oob_irq_nr,
				 &sdiodev->func[1]->dev);
			sdiodev->irq_en = false;
		}
	} else {
		sdio_claim_host(sdiodev->func[1]);
		sdio_release_irq(sdiodev->func[2]);
		sdio_release_irq(sdiodev->func[1]);
		sdio_release_host(sdiodev->func[1]);
	}

	return 0;
}

static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func,
					uint regaddr, u8 byte)
{
	int err_ret;

	/*
	 * Can only directly write to some F0 registers.
	 * Handle CCCR_IENx and CCCR_ABORT command
	 * as a special case.
	 */
	if ((regaddr == SDIO_CCCR_ABORT) ||
	    (regaddr == SDIO_CCCR_IENx))
		sdio_writeb(func, byte, regaddr, &err_ret);
	else
		sdio_f0_writeb(func, byte, regaddr, &err_ret);

	return err_ret;
}

static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
				    u32 addr, u8 regsz, void *data, bool write)
{
	struct sdio_func *func;
	int ret;

	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
		  write, fn, addr, regsz);

	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
	if (brcmf_sdiod_pm_resume_error(sdiodev))
		return -EIO;

	/* only allow byte access on F0 */
	if (WARN_ON(regsz > 1 && !fn))
		return -EINVAL;
	func = sdiodev->func[fn];

	switch (regsz) {
	case sizeof(u8):
		if (write) {
			if (fn)
				sdio_writeb(func, *(u8 *)data, addr, &ret);
			else
				ret = brcmf_sdiod_f0_writeb(func, addr,
							    *(u8 *)data);
		} else {
			if (fn)
				*(u8 *)data = sdio_readb(func, addr, &ret);
			else
				*(u8 *)data = sdio_f0_readb(func, addr, &ret);
		}
		break;
	case sizeof(u16):
		if (write)
			sdio_writew(func, *(u16 *)data, addr, &ret);
		else
			*(u16 *)data = sdio_readw(func, addr, &ret);
		break;
	case sizeof(u32):
		if (write)
			sdio_writel(func, *(u32 *)data, addr, &ret);
		else
			*(u32 *)data = sdio_readl(func, addr, &ret);
		break;
	default:
		brcmf_err("invalid size: %d\n", regsz);
		break;
	}

	if (ret) {
		/*
		 * SleepCSR register access can fail when
		 * waking up the device so reduce this noise
		 * in the logs.
		 */
		if (addr != SBSDIO_FUNC1_SLEEPCSR)
			brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
				  write ? "write" : "read", fn, addr, ret);
		else
			brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
				  write ? "write" : "read", fn, addr, ret);
	}
	return ret;
}

static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
				   u8 regsz, void *data, bool write)
{
	u8 func_num;
	s32 retry = 0;
	int ret;

	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
		return -ENOMEDIUM;

	/*
	 * figure out how to read the register based on address range
	 * 0x00 ~ 0x7FF: function 0 CCCR and FBR
	 * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
	 * The rest: function 1 silicon backplane core registers
	 */
	if ((addr & ~REG_F0_REG_MASK) == 0)
		func_num = SDIO_FUNC_0;
	else
		func_num = SDIO_FUNC_1;

	do {
		if (!write)
			memset(data, 0, regsz);
		/* for retry wait for 1 ms till bus get settled down */
		if (retry)
			usleep_range(1000, 2000);
		ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz,
					       data, write);
	} while (ret != 0 && ret != -ENOMEDIUM &&
		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);

	if (ret == -ENOMEDIUM)
		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
	else if (ret != 0)
		brcmf_err("failed with %d\n", ret);

	return ret;
}

static int
brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
{
	int err = 0, i;
	u8 addr[3];

	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
		return -ENOMEDIUM;

	addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK;
	addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK;
	addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;

	for (i = 0; i < 3; i++) {
		err = brcmf_sdiod_regrw_helper(sdiodev,
					       SBSDIO_FUNC1_SBADDRLOW + i,
					       sizeof(u8), &addr[i], true);
		if (err) {
			brcmf_err("failed at addr: 0x%0x\n",
				  SBSDIO_FUNC1_SBADDRLOW + i);
			break;
		}
	}

	return err;
}

static int
brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, uint width, u32 *addr)
{
	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
	int err = 0;

	if (bar0 != sdiodev->sbwad) {
		err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0);
		if (err)
			return err;

		sdiodev->sbwad = bar0;
	}

	*addr &= SBSDIO_SB_OFT_ADDR_MASK;

	if (width == 4)
		*addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;

	return 0;
}

u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
{
	u8 data;
	int retval;

	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
					  false);
	brcmf_dbg(SDIO, "data:0x%02x\n", data);

	if (ret)
		*ret = retval;

	return data;
}

u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
{
	u32 data;
	int retval;

	brcmf_dbg(SDIO, "addr:0x%08x\n", addr);
	retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr);
	if (retval)
		goto done;
	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
					  false);
	brcmf_dbg(SDIO, "data:0x%08x\n", data);

done:
	if (ret)
		*ret = retval;

	return data;
}

void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
		      u8 data, int *ret)
{
	int retval;

	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%02x\n", addr, data);
	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
					  true);
	if (ret)
		*ret = retval;
}

void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
		      u32 data, int *ret)
{
	int retval;

	brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data);
	retval = brcmf_sdiod_addrprep(sdiodev, sizeof(data), &addr);
	if (retval)
		goto done;
	retval = brcmf_sdiod_regrw_helper(sdiodev, addr, sizeof(data), &data,
					  true);

done:
	if (ret)
		*ret = retval;
}

static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
			     bool write, u32 addr, struct sk_buff *pkt)
{
	unsigned int req_sz;
	int err;

	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
	if (brcmf_sdiod_pm_resume_error(sdiodev))
		return -EIO;

	/* Single skb use the standard mmc interface */
	req_sz = pkt->len + 3;
	req_sz &= (uint)~3;

	if (write)
		err = sdio_memcpy_toio(sdiodev->func[fn], addr,
				       ((u8 *)(pkt->data)), req_sz);
	else if (fn == 1)
		err = sdio_memcpy_fromio(sdiodev->func[fn], ((u8 *)(pkt->data)),
					 addr, req_sz);
	else
		/* function 2 read is FIFO operation */
		err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr,
				  req_sz);
	if (err == -ENOMEDIUM)
		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
	return err;
}

/**
 * brcmf_sdiod_sglist_rw - SDIO interface function for block data access
 * @sdiodev: brcmfmac sdio device
 * @fn: SDIO function number
 * @write: direction flag
 * @addr: dongle memory address as source/destination
 * @pkt: skb pointer
 *
 * This function takes the respbonsibility as the interface function to MMC
 * stack for block data access. It assumes that the skb passed down by the
 * caller has already been padded and aligned.
 */
static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
				 bool write, u32 addr,
				 struct sk_buff_head *pktlist)
{
	unsigned int req_sz, func_blk_sz, sg_cnt, sg_data_sz, pkt_offset;
	unsigned int max_req_sz, orig_offset, dst_offset;
	unsigned short max_seg_cnt, seg_sz;
	unsigned char *pkt_data, *orig_data, *dst_data;
	struct sk_buff *pkt_next = NULL, *local_pkt_next;
	struct sk_buff_head local_list, *target_list;
	struct mmc_request mmc_req;
	struct mmc_command mmc_cmd;
	struct mmc_data mmc_dat;
	struct sg_table st;
	struct scatterlist *sgl;
	int ret = 0;

	if (!pktlist->qlen)
		return -EINVAL;

	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
	if (brcmf_sdiod_pm_resume_error(sdiodev))
		return -EIO;

	target_list = pktlist;
	/* for host with broken sg support, prepare a page aligned list */
	__skb_queue_head_init(&local_list);
	if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
		req_sz = 0;
		skb_queue_walk(pktlist, pkt_next)
			req_sz += pkt_next->len;
		req_sz = ALIGN(req_sz, sdiodev->func[fn]->cur_blksize);
		while (req_sz > PAGE_SIZE) {
			pkt_next = brcmu_pkt_buf_get_skb(PAGE_SIZE);
			if (pkt_next == NULL) {
				ret = -ENOMEM;
				goto exit;
			}
			__skb_queue_tail(&local_list, pkt_next);
			req_sz -= PAGE_SIZE;
		}
		pkt_next = brcmu_pkt_buf_get_skb(req_sz);
		if (pkt_next == NULL) {
			ret = -ENOMEM;
			goto exit;
		}
		__skb_queue_tail(&local_list, pkt_next);
		target_list = &local_list;
	}

	func_blk_sz = sdiodev->func[fn]->cur_blksize;
	max_req_sz = sdiodev->max_request_size;
	max_seg_cnt = min_t(unsigned short, sdiodev->max_segment_count,
			    target_list->qlen);
	seg_sz = target_list->qlen;
	pkt_offset = 0;
	pkt_next = target_list->next;

	if (sg_alloc_table(&st, max_seg_cnt, GFP_KERNEL)) {
		ret = -ENOMEM;
		goto exit;
	}

	memset(&mmc_req, 0, sizeof(struct mmc_request));
	memset(&mmc_cmd, 0, sizeof(struct mmc_command));
	memset(&mmc_dat, 0, sizeof(struct mmc_data));

	mmc_dat.sg = st.sgl;
	mmc_dat.blksz = func_blk_sz;
	mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
	mmc_cmd.opcode = SD_IO_RW_EXTENDED;
	mmc_cmd.arg = write ? 1<<31 : 0;	/* write flag  */
	mmc_cmd.arg |= (fn & 0x7) << 28;	/* SDIO func num */
	mmc_cmd.arg |= 1<<27;			/* block mode */
	/* for function 1 the addr will be incremented */
	mmc_cmd.arg |= (fn == 1) ? 1<<26 : 0;
	mmc_cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
	mmc_req.cmd = &mmc_cmd;
	mmc_req.data = &mmc_dat;

	while (seg_sz) {
		req_sz = 0;
		sg_cnt = 0;
		sgl = st.sgl;
		/* prep sg table */
		while (pkt_next != (struct sk_buff *)target_list) {
			pkt_data = pkt_next->data + pkt_offset;
			sg_data_sz = pkt_next->len - pkt_offset;
			if (sg_data_sz > sdiodev->max_segment_size)
				sg_data_sz = sdiodev->max_segment_size;
			if (sg_data_sz > max_req_sz - req_sz)
				sg_data_sz = max_req_sz - req_sz;

			sg_set_buf(sgl, pkt_data, sg_data_sz);

			sg_cnt++;
			sgl = sg_next(sgl);
			req_sz += sg_data_sz;
			pkt_offset += sg_data_sz;
			if (pkt_offset == pkt_next->len) {
				pkt_offset = 0;
				pkt_next = pkt_next->next;
			}

			if (req_sz >= max_req_sz || sg_cnt >= max_seg_cnt)
				break;
		}
		seg_sz -= sg_cnt;

		if (req_sz % func_blk_sz != 0) {
			brcmf_err("sg request length %u is not %u aligned\n",
				  req_sz, func_blk_sz);
			ret = -ENOTBLK;
			goto exit;
		}

		mmc_dat.sg_len = sg_cnt;
		mmc_dat.blocks = req_sz / func_blk_sz;
		mmc_cmd.arg |= (addr & 0x1FFFF) << 9;	/* address */
		mmc_cmd.arg |= mmc_dat.blocks & 0x1FF;	/* block count */
		/* incrementing addr for function 1 */
		if (fn == 1)
			addr += req_sz;

		mmc_set_data_timeout(&mmc_dat, sdiodev->func[fn]->card);
		mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req);

		ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
		if (ret == -ENOMEDIUM) {
			brcmf_bus_change_state(sdiodev->bus_if,
					       BRCMF_BUS_NOMEDIUM);
			break;
		} else if (ret != 0) {
			brcmf_err("CMD53 sg block %s failed %d\n",
				  write ? "write" : "read", ret);
			ret = -EIO;
			break;
		}
	}

	if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
		local_pkt_next = local_list.next;
		orig_offset = 0;
		skb_queue_walk(pktlist, pkt_next) {
			dst_offset = 0;
			do {
				req_sz = local_pkt_next->len - orig_offset;
				req_sz = min_t(uint, pkt_next->len - dst_offset,
					       req_sz);
				orig_data = local_pkt_next->data + orig_offset;
				dst_data = pkt_next->data + dst_offset;
				memcpy(dst_data, orig_data, req_sz);
				orig_offset += req_sz;
				dst_offset += req_sz;
				if (orig_offset == local_pkt_next->len) {
					orig_offset = 0;
					local_pkt_next = local_pkt_next->next;
				}
				if (dst_offset == pkt_next->len)
					break;
			} while (!skb_queue_empty(&local_list));
		}
	}

exit:
	sg_free_table(&st);
	while ((pkt_next = __skb_dequeue(&local_list)) != NULL)
		brcmu_pkt_buf_free_skb(pkt_next);

	return ret;
}

int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
{
	struct sk_buff *mypkt;
	int err;

	mypkt = brcmu_pkt_buf_get_skb(nbytes);
	if (!mypkt) {
		brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
			  nbytes);
		return -EIO;
	}

	err = brcmf_sdiod_recv_pkt(sdiodev, mypkt);
	if (!err)
		memcpy(buf, mypkt->data, nbytes);

	brcmu_pkt_buf_free_skb(mypkt);
	return err;
}

int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
{
	u32 addr = sdiodev->sbwad;
	int err = 0;

	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);

	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
	if (err)
		goto done;

	err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt);

done:
	return err;
}

int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
			   struct sk_buff_head *pktq, uint totlen)
{
	struct sk_buff *glom_skb;
	struct sk_buff *skb;
	u32 addr = sdiodev->sbwad;
	int err = 0;

	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
		  addr, pktq->qlen);

	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
	if (err)
		goto done;

	if (pktq->qlen == 1)
		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
					 pktq->next);
	else if (!sdiodev->sg_support) {
		glom_skb = brcmu_pkt_buf_get_skb(totlen);
		if (!glom_skb)
			return -ENOMEM;
		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
					 glom_skb);
		if (err)
			goto done;

		skb_queue_walk(pktq, skb) {
			memcpy(skb->data, glom_skb->data, skb->len);
			skb_pull(glom_skb, skb->len);
		}
	} else
		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr,
					    pktq);

done:
	return err;
}

int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
{
	struct sk_buff *mypkt;
	u32 addr = sdiodev->sbwad;
	int err;

	mypkt = brcmu_pkt_buf_get_skb(nbytes);
	if (!mypkt) {
		brcmf_err("brcmu_pkt_buf_get_skb failed: len %d\n",
			  nbytes);
		return -EIO;
	}

	memcpy(mypkt->data, buf, nbytes);

	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);

	if (!err)
		err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr,
					 mypkt);

	brcmu_pkt_buf_free_skb(mypkt);
	return err;

}

int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
			 struct sk_buff_head *pktq)
{
	struct sk_buff *skb;
	u32 addr = sdiodev->sbwad;
	int err;

	brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);

	err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
	if (err)
		return err;

	if (pktq->qlen == 1 || !sdiodev->sg_support)
		skb_queue_walk(pktq, skb) {
			err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true,
						 addr, skb);
			if (err)
				break;
		}
	else
		err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
					    pktq);

	return err;
}

int
brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
		  u8 *data, uint size)
{
	int bcmerror = 0;
	struct sk_buff *pkt;
	u32 sdaddr;
	uint dsize;

	dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
	pkt = dev_alloc_skb(dsize);
	if (!pkt) {
		brcmf_err("dev_alloc_skb failed: len %d\n", dsize);
		return -EIO;
	}
	pkt->priority = 0;

	/* Determine initial transfer parameters */
	sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
	if ((sdaddr + size) & SBSDIO_SBWINDOW_MASK)
		dsize = (SBSDIO_SB_OFT_ADDR_LIMIT - sdaddr);
	else
		dsize = size;

	sdio_claim_host(sdiodev->func[1]);

	/* Do the transfer(s) */
	while (size) {
		/* Set the backplane window to include the start address */
		bcmerror = brcmf_sdiod_set_sbaddr_window(sdiodev, address);
		if (bcmerror)
			break;

		brcmf_dbg(SDIO, "%s %d bytes at offset 0x%08x in window 0x%08x\n",
			  write ? "write" : "read", dsize,
			  sdaddr, address & SBSDIO_SBWINDOW_MASK);

		sdaddr &= SBSDIO_SB_OFT_ADDR_MASK;
		sdaddr |= SBSDIO_SB_ACCESS_2_4B_FLAG;

		skb_put(pkt, dsize);
		if (write)
			memcpy(pkt->data, data, dsize);
		bcmerror = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_1, write,
					      sdaddr, pkt);
		if (bcmerror) {
			brcmf_err("membytes transfer failed\n");
			break;
		}
		if (!write)
			memcpy(data, pkt->data, dsize);
		skb_trim(pkt, 0);

		/* Adjust for next transfer (if any) */
		size -= dsize;
		if (size) {
			data += dsize;
			address += dsize;
			sdaddr = 0;
			dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
		}
	}

	dev_kfree_skb(pkt);

	/* Return the window to backplane enumeration space for core access */
	if (brcmf_sdiod_set_sbaddr_window(sdiodev, sdiodev->sbwad))
		brcmf_err("FAILED to set window back to 0x%x\n",
			  sdiodev->sbwad);

	sdio_release_host(sdiodev->func[1]);

	return bcmerror;
}

int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
{
	char t_func = (char)fn;
	brcmf_dbg(SDIO, "Enter\n");

	/* issue abort cmd52 command through F0 */
	brcmf_sdiod_request_data(sdiodev, SDIO_FUNC_0, SDIO_CCCR_ABORT,
				 sizeof(t_func), &t_func, true);

	brcmf_dbg(SDIO, "Exit\n");
	return 0;
}

static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
{
	if (sdiodev->bus) {
		brcmf_sdio_remove(sdiodev->bus);
		sdiodev->bus = NULL;
	}

	/* Disable Function 2 */
	sdio_claim_host(sdiodev->func[2]);
	sdio_disable_func(sdiodev->func[2]);
	sdio_release_host(sdiodev->func[2]);

	/* Disable Function 1 */
	sdio_claim_host(sdiodev->func[1]);
	sdio_disable_func(sdiodev->func[1]);
	sdio_release_host(sdiodev->func[1]);

	sdiodev->sbwad = 0;

	return 0;
}

static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
{
	struct sdio_func *func;
	struct mmc_host *host;
	uint max_blocks;
	int ret = 0;

	sdiodev->num_funcs = 2;

	sdio_claim_host(sdiodev->func[1]);

	ret = sdio_set_block_size(sdiodev->func[1], SDIO_FUNC1_BLOCKSIZE);
	if (ret) {
		brcmf_err("Failed to set F1 blocksize\n");
		sdio_release_host(sdiodev->func[1]);
		goto out;
	}
	ret = sdio_set_block_size(sdiodev->func[2], SDIO_FUNC2_BLOCKSIZE);
	if (ret) {
		brcmf_err("Failed to set F2 blocksize\n");
		sdio_release_host(sdiodev->func[1]);
		goto out;
	}

	/* increase F2 timeout */
	sdiodev->func[2]->enable_timeout = SDIO_WAIT_F2RDY;

	/* Enable Function 1 */
	ret = sdio_enable_func(sdiodev->func[1]);
	sdio_release_host(sdiodev->func[1]);
	if (ret) {
		brcmf_err("Failed to enable F1: err=%d\n", ret);
		goto out;
	}

	/*
	 * determine host related variables after brcmf_sdiod_probe()
	 * as func->cur_blksize is properly set and F2 init has been
	 * completed successfully.
	 */
	func = sdiodev->func[2];
	host = func->card->host;
	sdiodev->sg_support = host->max_segs > 1;
	max_blocks = min_t(uint, host->max_blk_count, 511u);
	sdiodev->max_request_size = min_t(uint, host->max_req_size,
					  max_blocks * func->cur_blksize);
	sdiodev->max_segment_count = min_t(uint, host->max_segs,
					   SG_MAX_SINGLE_ALLOC);
	sdiodev->max_segment_size = host->max_seg_size;

	/* try to attach to the target device */
	sdiodev->bus = brcmf_sdio_probe(sdiodev);
	if (!sdiodev->bus) {
		ret = -ENODEV;
		goto out;
	}

out:
	if (ret)
		brcmf_sdiod_remove(sdiodev);

	return ret;
}

/* devices we support, null terminated */
static const struct sdio_device_id brcmf_sdmmc_ids[] = {
	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43143)},
	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43241)},
	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)},
	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)},
	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)},
	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43362)},
	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
		     SDIO_DEVICE_ID_BROADCOM_4335_4339)},
	{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);

static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata;


static int brcmf_ops_sdio_probe(struct sdio_func *func,
				const struct sdio_device_id *id)
{
	int err;
	struct brcmf_sdio_dev *sdiodev;
	struct brcmf_bus *bus_if;

	brcmf_dbg(SDIO, "Enter\n");
	brcmf_dbg(SDIO, "Class=%x\n", func->class);
	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
	brcmf_dbg(SDIO, "Function#: %d\n", func->num);

	/* Consume func num 1 but dont do anything with it. */
	if (func->num == 1)
		return 0;

	/* Ignore anything but func 2 */
	if (func->num != 2)
		return -ENODEV;

	bus_if = kzalloc(sizeof(struct brcmf_bus), GFP_KERNEL);
	if (!bus_if)
		return -ENOMEM;
	sdiodev = kzalloc(sizeof(struct brcmf_sdio_dev), GFP_KERNEL);
	if (!sdiodev) {
		kfree(bus_if);
		return -ENOMEM;
	}

	/* store refs to functions used. mmc_card does
	 * not hold the F0 function pointer.
	 */
	sdiodev->func[0] = kmemdup(func, sizeof(*func), GFP_KERNEL);
	sdiodev->func[0]->num = 0;
	sdiodev->func[1] = func->card->sdio_func[0];
	sdiodev->func[2] = func;

	sdiodev->bus_if = bus_if;
	bus_if->bus_priv.sdio = sdiodev;
	bus_if->proto_type = BRCMF_PROTO_BCDC;
	dev_set_drvdata(&func->dev, bus_if);
	dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
	sdiodev->dev = &sdiodev->func[1]->dev;
	sdiodev->pdata = brcmfmac_sdio_pdata;

	atomic_set(&sdiodev->suspend, false);
	init_waitqueue_head(&sdiodev->request_word_wait);
	init_waitqueue_head(&sdiodev->request_buffer_wait);

	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdiod_probe...\n");
	err = brcmf_sdiod_probe(sdiodev);
	if (err) {
		brcmf_err("F2 error, probe failed %d...\n", err);
		goto fail;
	}

	brcmf_dbg(SDIO, "F2 init completed...\n");
	return 0;

fail:
	dev_set_drvdata(&func->dev, NULL);
	dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
	kfree(sdiodev->func[0]);
	kfree(sdiodev);
	kfree(bus_if);
	return err;
}

static void brcmf_ops_sdio_remove(struct sdio_func *func)
{
	struct brcmf_bus *bus_if;
	struct brcmf_sdio_dev *sdiodev;

	brcmf_dbg(SDIO, "Enter\n");
	brcmf_dbg(SDIO, "sdio vendor ID: 0x%04x\n", func->vendor);
	brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device);
	brcmf_dbg(SDIO, "Function: %d\n", func->num);

	if (func->num != 1 && func->num != 2)
		return;

	bus_if = dev_get_drvdata(&func->dev);
	if (bus_if) {
		sdiodev = bus_if->bus_priv.sdio;
		brcmf_sdiod_remove(sdiodev);

		dev_set_drvdata(&sdiodev->func[1]->dev, NULL);
		dev_set_drvdata(&sdiodev->func[2]->dev, NULL);

		kfree(bus_if);
		kfree(sdiodev->func[0]);
		kfree(sdiodev);
	}

	brcmf_dbg(SDIO, "Exit\n");
}

#ifdef CONFIG_PM_SLEEP
static int brcmf_ops_sdio_suspend(struct device *dev)
{
	mmc_pm_flag_t sdio_flags;
	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
	int ret = 0;

	brcmf_dbg(SDIO, "\n");

	atomic_set(&sdiodev->suspend, true);

	sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]);
	if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
		brcmf_err("Host can't keep power while suspended\n");
		return -EINVAL;
	}

	ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER);
	if (ret) {
		brcmf_err("Failed to set pm_flags\n");
		return ret;
	}

	brcmf_sdio_wd_timer(sdiodev->bus, 0);

	return ret;
}

static int brcmf_ops_sdio_resume(struct device *dev)
{
	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;

	brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
	atomic_set(&sdiodev->suspend, false);
	return 0;
}

static const struct dev_pm_ops brcmf_sdio_pm_ops = {
	.suspend	= brcmf_ops_sdio_suspend,
	.resume		= brcmf_ops_sdio_resume,
};
#endif	/* CONFIG_PM_SLEEP */

static struct sdio_driver brcmf_sdmmc_driver = {
	.probe = brcmf_ops_sdio_probe,
	.remove = brcmf_ops_sdio_remove,
	.name = BRCMFMAC_SDIO_PDATA_NAME,
	.id_table = brcmf_sdmmc_ids,
	.drv = {
		.owner = THIS_MODULE,
#ifdef CONFIG_PM_SLEEP
		.pm = &brcmf_sdio_pm_ops,
#endif	/* CONFIG_PM_SLEEP */
	},
};

static int brcmf_sdio_pd_probe(struct platform_device *pdev)
{
	brcmf_dbg(SDIO, "Enter\n");

	brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev);

	if (brcmfmac_sdio_pdata->power_on)
		brcmfmac_sdio_pdata->power_on();

	return 0;
}

static int brcmf_sdio_pd_remove(struct platform_device *pdev)
{
	brcmf_dbg(SDIO, "Enter\n");

	if (brcmfmac_sdio_pdata->power_off)
		brcmfmac_sdio_pdata->power_off();

	sdio_unregister_driver(&brcmf_sdmmc_driver);

	return 0;
}

static struct platform_driver brcmf_sdio_pd = {
	.remove		= brcmf_sdio_pd_remove,
	.driver		= {
		.name	= BRCMFMAC_SDIO_PDATA_NAME,
		.owner	= THIS_MODULE,
	}
};

void brcmf_sdio_register(void)
{
	int ret;

	ret = sdio_register_driver(&brcmf_sdmmc_driver);
	if (ret)
		brcmf_err("sdio_register_driver failed: %d\n", ret);
}

void brcmf_sdio_exit(void)
{
	brcmf_dbg(SDIO, "Enter\n");

	if (brcmfmac_sdio_pdata)
		platform_driver_unregister(&brcmf_sdio_pd);
	else
		sdio_unregister_driver(&brcmf_sdmmc_driver);
}

void __init brcmf_sdio_init(void)
{
	int ret;

	brcmf_dbg(SDIO, "Enter\n");

	ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
	if (ret == -ENODEV)
		brcmf_dbg(SDIO, "No platform data available.\n");
}