Iskren Chernev | e731465 | 2020-04-14 20:22:48 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | // |
| 3 | // max77826-regulator.c - regulator driver for Maxim MAX77826 |
| 4 | // |
| 5 | // Author: Iskren Chernev <iskren.chernev@gmail.com> |
| 6 | |
| 7 | #include <linux/kernel.h> |
| 8 | #include <linux/module.h> |
| 9 | #include <linux/init.h> |
| 10 | #include <linux/err.h> |
| 11 | #include <linux/of.h> |
| 12 | #include <linux/of_device.h> |
| 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/regulator/driver.h> |
| 15 | #include <linux/regulator/of_regulator.h> |
| 16 | #include <linux/i2c.h> |
| 17 | #include <linux/regmap.h> |
| 18 | |
| 19 | enum max77826_registers { |
| 20 | MAX77826_REG_INT_SRC = 0x00, |
| 21 | MAX77826_REG_SYS_INT, |
| 22 | MAX77826_REG_INT1, |
| 23 | MAX77826_REG_INT2, |
| 24 | MAX77826_REG_BB_INT, |
| 25 | MAX77826_REG_INT_SRC_M, |
| 26 | MAX77826_REG_TOPSYS_INT_M, |
| 27 | MAX77826_REG_INT1_M, |
| 28 | MAX77826_REG_INT2_M, |
| 29 | MAX77826_REG_BB_INT_M, |
| 30 | MAX77826_REG_TOPSYS_STAT, |
| 31 | MAX77826_REG_STAT1, |
| 32 | MAX77826_REG_STAT2, |
| 33 | MAX77826_REG_BB_STAT, |
| 34 | /* 0x0E - 0x0F: Reserved */ |
| 35 | MAX77826_REG_LDO_OPMD1 = 0x10, |
| 36 | MAX77826_REG_LDO_OPMD2, |
| 37 | MAX77826_REG_LDO_OPMD3, |
| 38 | MAX77826_REG_LDO_OPMD4, |
| 39 | MAX77826_REG_B_BB_OPMD, |
| 40 | /* 0x15 - 0x1F: Reserved */ |
| 41 | MAX77826_REG_LDO1_CFG = 0x20, |
| 42 | MAX77826_REG_LDO2_CFG, |
| 43 | MAX77826_REG_LDO3_CFG, |
| 44 | MAX77826_REG_LDO4_CFG, |
| 45 | MAX77826_REG_LDO5_CFG, |
| 46 | MAX77826_REG_LDO6_CFG, |
| 47 | MAX77826_REG_LDO7_CFG, |
| 48 | MAX77826_REG_LDO8_CFG, |
| 49 | MAX77826_REG_LDO9_CFG, |
| 50 | MAX77826_REG_LDO10_CFG, |
| 51 | MAX77826_REG_LDO11_CFG, |
| 52 | MAX77826_REG_LDO12_CFG, |
| 53 | MAX77826_REG_LDO13_CFG, |
| 54 | MAX77826_REG_LDO14_CFG, |
| 55 | MAX77826_REG_LDO15_CFG, |
| 56 | /* 0x2F: Reserved */ |
| 57 | MAX77826_REG_BUCK_CFG = 0x30, |
| 58 | MAX77826_REG_BUCK_VOUT, |
| 59 | MAX77826_REG_BB_CFG, |
| 60 | MAX77826_REG_BB_VOUT, |
| 61 | /* 0x34 - 0x3F: Reserved */ |
| 62 | MAX77826_REG_BUCK_SS_FREQ = 0x40, |
| 63 | MAX77826_REG_UVLO_FALL, |
| 64 | /* 0x42 - 0xCE: Reserved */ |
| 65 | MAX77826_REG_DEVICE_ID = 0xCF, |
| 66 | }; |
| 67 | |
| 68 | enum max77826_regulators { |
| 69 | MAX77826_LDO1 = 0, |
| 70 | MAX77826_LDO2, |
| 71 | MAX77826_LDO3, |
| 72 | MAX77826_LDO4, |
| 73 | MAX77826_LDO5, |
| 74 | MAX77826_LDO6, |
| 75 | MAX77826_LDO7, |
| 76 | MAX77826_LDO8, |
| 77 | MAX77826_LDO9, |
| 78 | MAX77826_LDO10, |
| 79 | MAX77826_LDO11, |
| 80 | MAX77826_LDO12, |
| 81 | MAX77826_LDO13, |
| 82 | MAX77826_LDO14, |
| 83 | MAX77826_LDO15, |
| 84 | MAX77826_BUCK, |
| 85 | MAX77826_BUCKBOOST, |
| 86 | MAX77826_MAX_REGULATORS, |
| 87 | }; |
| 88 | |
| 89 | #define MAX77826_MASK_LDO 0x7f |
| 90 | #define MAX77826_MASK_BUCK 0xff |
| 91 | #define MAX77826_MASK_BUCKBOOST 0x7f |
| 92 | #define MAX77826_BUCK_RAMP_DELAY 12500 |
| 93 | |
| 94 | /* values in mV */ |
| 95 | /* for LDO1-3 */ |
| 96 | #define MAX77826_NMOS_LDO_VOLT_MIN 600000 |
| 97 | #define MAX77826_NMOS_LDO_VOLT_MAX 2187500 |
| 98 | #define MAX77826_NMOS_LDO_VOLT_STEP 12500 |
| 99 | |
| 100 | /* for LDO4-15 */ |
| 101 | #define MAX77826_PMOS_LDO_VOLT_MIN 800000 |
| 102 | #define MAX77826_PMOS_LDO_VOLT_MAX 3975000 |
| 103 | #define MAX77826_PMOS_LDO_VOLT_STEP 25000 |
| 104 | |
| 105 | /* for BUCK */ |
| 106 | #define MAX77826_BUCK_VOLT_MIN 500000 |
| 107 | #define MAX77826_BUCK_VOLT_MAX 1800000 |
| 108 | #define MAX77826_BUCK_VOLT_STEP 6250 |
| 109 | |
| 110 | /* for BUCKBOOST */ |
| 111 | #define MAX77826_BUCKBOOST_VOLT_MIN 2600000 |
| 112 | #define MAX77826_BUCKBOOST_VOLT_MAX 4187500 |
| 113 | #define MAX77826_BUCKBOOST_VOLT_STEP 12500 |
| 114 | #define MAX77826_VOLT_RANGE(_type) \ |
| 115 | ((MAX77826_ ## _type ## _VOLT_MAX - \ |
| 116 | MAX77826_ ## _type ## _VOLT_MIN) / \ |
| 117 | MAX77826_ ## _type ## _VOLT_STEP + 1) |
| 118 | |
| 119 | #define MAX77826_LDO(_id, _type) \ |
| 120 | [MAX77826_LDO ## _id] = { \ |
| 121 | .id = MAX77826_LDO ## _id, \ |
| 122 | .name = "LDO"#_id, \ |
| 123 | .of_match = of_match_ptr("LDO"#_id), \ |
| 124 | .regulators_node = "regulators", \ |
| 125 | .ops = &max77826_most_ops, \ |
| 126 | .min_uV = MAX77826_ ## _type ## _LDO_VOLT_MIN, \ |
| 127 | .uV_step = MAX77826_ ## _type ## _LDO_VOLT_STEP, \ |
| 128 | .n_voltages = MAX77826_VOLT_RANGE(_type ## _LDO), \ |
| 129 | .enable_reg = MAX77826_REG_LDO_OPMD1 + (_id - 1) / 4, \ |
| 130 | .enable_mask = BIT(((_id - 1) % 4) * 2 + 1), \ |
| 131 | .vsel_reg = MAX77826_REG_LDO1_CFG + (_id - 1), \ |
| 132 | .vsel_mask = MAX77826_MASK_LDO, \ |
| 133 | .owner = THIS_MODULE, \ |
| 134 | } |
| 135 | |
| 136 | #define MAX77826_BUCK(_idx, _id, _ops) \ |
| 137 | [MAX77826_ ## _id] = { \ |
| 138 | .id = MAX77826_ ## _id, \ |
| 139 | .name = #_id, \ |
| 140 | .of_match = of_match_ptr(#_id), \ |
| 141 | .regulators_node = "regulators", \ |
| 142 | .ops = &_ops, \ |
| 143 | .min_uV = MAX77826_ ## _id ## _VOLT_MIN, \ |
| 144 | .uV_step = MAX77826_ ## _id ## _VOLT_STEP, \ |
| 145 | .n_voltages = MAX77826_VOLT_RANGE(_id), \ |
| 146 | .enable_reg = MAX77826_REG_B_BB_OPMD, \ |
| 147 | .enable_mask = BIT(_idx * 2 + 1), \ |
| 148 | .vsel_reg = MAX77826_REG_BUCK_VOUT + _idx * 2, \ |
| 149 | .vsel_mask = MAX77826_MASK_ ## _id, \ |
| 150 | .owner = THIS_MODULE, \ |
| 151 | } |
| 152 | |
| 153 | |
| 154 | |
| 155 | struct max77826_regulator_info { |
| 156 | struct regmap *regmap; |
| 157 | struct regulator_desc *rdesc; |
| 158 | }; |
| 159 | |
| 160 | static const struct regmap_config max77826_regmap_config = { |
| 161 | .reg_bits = 8, |
| 162 | .val_bits = 8, |
| 163 | .max_register = MAX77826_REG_DEVICE_ID, |
| 164 | }; |
| 165 | |
| 166 | static int max77826_set_voltage_time_sel(struct regulator_dev *, |
| 167 | unsigned int old_selector, |
| 168 | unsigned int new_selector); |
| 169 | |
| 170 | static const struct regulator_ops max77826_most_ops = { |
| 171 | .enable = regulator_enable_regmap, |
| 172 | .disable = regulator_disable_regmap, |
| 173 | .is_enabled = regulator_is_enabled_regmap, |
| 174 | .list_voltage = regulator_list_voltage_linear, |
| 175 | .map_voltage = regulator_map_voltage_linear, |
| 176 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 177 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 178 | }; |
| 179 | |
| 180 | static const struct regulator_ops max77826_buck_ops = { |
| 181 | .enable = regulator_enable_regmap, |
| 182 | .disable = regulator_disable_regmap, |
| 183 | .is_enabled = regulator_is_enabled_regmap, |
| 184 | .list_voltage = regulator_list_voltage_linear, |
| 185 | .map_voltage = regulator_map_voltage_linear, |
| 186 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 187 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 188 | .set_voltage_time_sel = max77826_set_voltage_time_sel, |
| 189 | }; |
| 190 | |
| 191 | static struct regulator_desc max77826_regulators_desc[] = { |
| 192 | MAX77826_LDO(1, NMOS), |
| 193 | MAX77826_LDO(2, NMOS), |
| 194 | MAX77826_LDO(3, NMOS), |
| 195 | MAX77826_LDO(4, PMOS), |
| 196 | MAX77826_LDO(5, PMOS), |
| 197 | MAX77826_LDO(6, PMOS), |
| 198 | MAX77826_LDO(7, PMOS), |
| 199 | MAX77826_LDO(8, PMOS), |
| 200 | MAX77826_LDO(9, PMOS), |
| 201 | MAX77826_LDO(10, PMOS), |
| 202 | MAX77826_LDO(11, PMOS), |
| 203 | MAX77826_LDO(12, PMOS), |
| 204 | MAX77826_LDO(13, PMOS), |
| 205 | MAX77826_LDO(14, PMOS), |
| 206 | MAX77826_LDO(15, PMOS), |
| 207 | MAX77826_BUCK(0, BUCK, max77826_buck_ops), |
| 208 | MAX77826_BUCK(1, BUCKBOOST, max77826_most_ops), |
| 209 | }; |
| 210 | |
| 211 | static int max77826_set_voltage_time_sel(struct regulator_dev *rdev, |
| 212 | unsigned int old_selector, |
| 213 | unsigned int new_selector) |
| 214 | { |
| 215 | if (new_selector > old_selector) { |
| 216 | return DIV_ROUND_UP(MAX77826_BUCK_VOLT_STEP * |
| 217 | (new_selector - old_selector), |
| 218 | MAX77826_BUCK_RAMP_DELAY); |
| 219 | } |
| 220 | |
| 221 | return 0; |
| 222 | } |
| 223 | |
| 224 | static int max77826_read_device_id(struct regmap *regmap, struct device *dev) |
| 225 | { |
| 226 | unsigned int device_id; |
| 227 | int res; |
| 228 | |
| 229 | res = regmap_read(regmap, MAX77826_REG_DEVICE_ID, &device_id); |
| 230 | if (!res) |
| 231 | dev_dbg(dev, "DEVICE_ID: 0x%x\n", device_id); |
| 232 | |
| 233 | return res; |
| 234 | } |
| 235 | |
| 236 | static int max77826_i2c_probe(struct i2c_client *client) |
| 237 | { |
| 238 | struct device *dev = &client->dev; |
| 239 | struct max77826_regulator_info *info; |
| 240 | struct regulator_config config = {}; |
| 241 | struct regulator_dev *rdev; |
| 242 | struct regmap *regmap; |
| 243 | int i; |
| 244 | |
| 245 | info = devm_kzalloc(dev, sizeof(struct max77826_regulator_info), |
| 246 | GFP_KERNEL); |
| 247 | if (!info) |
| 248 | return -ENOMEM; |
| 249 | |
| 250 | info->rdesc = max77826_regulators_desc; |
| 251 | regmap = devm_regmap_init_i2c(client, &max77826_regmap_config); |
| 252 | if (IS_ERR(regmap)) { |
| 253 | dev_err(dev, "Failed to allocate regmap!\n"); |
| 254 | return PTR_ERR(regmap); |
| 255 | } |
| 256 | |
| 257 | info->regmap = regmap; |
| 258 | i2c_set_clientdata(client, info); |
| 259 | |
| 260 | config.dev = dev; |
| 261 | config.regmap = regmap; |
| 262 | config.driver_data = info; |
| 263 | |
| 264 | for (i = 0; i < MAX77826_MAX_REGULATORS; i++) { |
| 265 | rdev = devm_regulator_register(dev, |
| 266 | &max77826_regulators_desc[i], |
| 267 | &config); |
| 268 | if (IS_ERR(rdev)) { |
| 269 | dev_err(dev, "Failed to register regulator!\n"); |
| 270 | return PTR_ERR(rdev); |
| 271 | } |
| 272 | } |
| 273 | |
| 274 | return max77826_read_device_id(regmap, dev); |
| 275 | } |
| 276 | |
| 277 | static const struct of_device_id max77826_of_match[] = { |
| 278 | { .compatible = "maxim,max77826" }, |
| 279 | { /* sentinel */ } |
| 280 | }; |
| 281 | MODULE_DEVICE_TABLE(of, max77826_of_match); |
| 282 | |
| 283 | static const struct i2c_device_id max77826_id[] = { |
| 284 | { "max77826-regulator" }, |
| 285 | { /* sentinel */ } |
| 286 | }; |
| 287 | MODULE_DEVICE_TABLE(i2c, max77826_id); |
| 288 | |
| 289 | static struct i2c_driver max77826_regulator_driver = { |
| 290 | .driver = { |
| 291 | .name = "max77826", |
| 292 | .of_match_table = of_match_ptr(max77826_of_match), |
| 293 | }, |
| 294 | .probe_new = max77826_i2c_probe, |
| 295 | .id_table = max77826_id, |
| 296 | }; |
| 297 | module_i2c_driver(max77826_regulator_driver); |
| 298 | |
| 299 | MODULE_AUTHOR("Iskren Chernev <iskren.chernev@gmail.com>"); |
| 300 | MODULE_DESCRIPTION("MAX77826 PMIC regulator driver"); |
| 301 | MODULE_LICENSE("GPL"); |