| Tony Lindgren | 687c276 | 2015-05-20 09:23:43 -0700 | [diff] [blame] | 1 | /* |
| 2 | * This program is free software; you can redistribute it and/or modify |
| 3 | * it under the terms of the GNU General Public License version 2 as |
| 4 | * published by the Free Software Foundation. |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | |
| 9 | #include "omap36xx.dtsi" |
| 10 | #include "logicpd-torpedo-som.dtsi" |
| 11 | #include "omap-gpmc-smsc9221.dtsi" |
| Adam Ford | 739f85b | 2017-11-30 05:46:50 -0600 | [diff] [blame] | 12 | #include "logicpd-torpedo-baseboard.dtsi" |
| Tony Lindgren | 687c276 | 2015-05-20 09:23:43 -0700 | [diff] [blame] | 13 | |
| 14 | / { |
| Adam Ford | 44f95b1 | 2016-02-22 19:29:19 -0600 | [diff] [blame] | 15 | model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; |
| Tony Lindgren | 57df538 | 2015-10-16 12:23:33 -0700 | [diff] [blame] | 16 | compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; |
| Adam Ford | a388673 | 2017-11-30 18:23:01 -0600 | [diff] [blame] | 17 | |
| 18 | wl12xx_vmmc: wl12xx_vmmc { |
| 19 | compatible = "regulator-fixed"; |
| 20 | regulator-name = "vwl1271"; |
| 21 | regulator-min-microvolt = <1800000>; |
| 22 | regulator-max-microvolt = <1800000>; |
| 23 | gpio = <&gpio5 29 0>; /* gpio157 */ |
| 24 | startup-delay-us = <70000>; |
| 25 | enable-active-high; |
| 26 | vin-supply = <&vmmc2>; |
| 27 | }; |
| 28 | }; |
| 29 | |
| 30 | /* |
| 31 | * Only found on the wireless SOM. For the SOM without wireless, the pins for |
| 32 | * MMC3 can be routed with jumpers to the second MMC slot on the devkit and |
| 33 | * gpio157 is not connected. So this should be OK to keep common for now, |
| 34 | * probably device tree overlays is the way to go with the various SOM and |
| 35 | * jumpering combinations for the long run. |
| 36 | */ |
| 37 | &mmc3 { |
| 38 | interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; |
| 39 | pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; |
| 40 | pinctrl-names = "default"; |
| 41 | vmmc-supply = <&wl12xx_vmmc>; |
| 42 | non-removable; |
| 43 | bus-width = <4>; |
| 44 | cap-power-off-card; |
| 45 | #address-cells = <1>; |
| 46 | #size-cells = <0>; |
| 47 | wlcore: wlcore@2 { |
| 48 | compatible = "ti,wl1283"; |
| 49 | reg = <2>; |
| 50 | interrupt-parent = <&gpio5>; |
| Tony Lindgren | 572cf7d | 2018-07-02 23:57:20 -0700 | [diff] [blame] | 51 | interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */ |
| Adam Ford | a388673 | 2017-11-30 18:23:01 -0600 | [diff] [blame] | 52 | ref-clock-frequency = <26000000>; |
| 53 | tcxo-clock-frequency = <26000000>; |
| 54 | }; |
| 55 | }; |
| 56 | |
| 57 | &omap3_pmx_core { |
| 58 | mmc3_pins: pinmux_mm3_pins { |
| 59 | pinctrl-single,pins = < |
| 60 | OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ |
| 61 | OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ |
| 62 | OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ |
| 63 | OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ |
| 64 | OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ |
| 65 | OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ |
| 66 | >; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | &omap3_pmx_core2 { |
| 71 | mmc3_core2_pins: pinmux_mmc3_core2_pins { |
| 72 | pinctrl-single,pins = < |
| 73 | OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ |
| 74 | OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ |
| 75 | >; |
| 76 | }; |
| Tony Lindgren | 687c276 | 2015-05-20 09:23:43 -0700 | [diff] [blame] | 77 | }; |