Liam Girdwood | d16046f | 2019-04-12 11:08:51 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| 2 | // |
| 3 | // This file is provided under a dual BSD/GPLv2 license. When using or |
| 4 | // redistributing this file, you may do so under either license. |
| 5 | // |
| 6 | // Copyright(c) 2018 Intel Corporation. All rights reserved. |
| 7 | // |
| 8 | // Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com> |
| 9 | // Ranjani Sridharan <ranjani.sridharan@linux.intel.com> |
| 10 | // Rander Wang <rander.wang@intel.com> |
| 11 | // Keyon Jie <yang.jie@linux.intel.com> |
| 12 | // |
| 13 | |
| 14 | /* |
| 15 | * Hardware interface for HDA DSP code loader |
| 16 | */ |
| 17 | |
| 18 | #include <linux/firmware.h> |
| 19 | #include <sound/hdaudio_ext.h> |
| 20 | #include <sound/sof.h> |
| 21 | #include "../ops.h" |
| 22 | #include "hda.h" |
| 23 | |
| 24 | #define HDA_FW_BOOT_ATTEMPTS 3 |
| 25 | |
| 26 | static int cl_stream_prepare(struct snd_sof_dev *sdev, unsigned int format, |
| 27 | unsigned int size, struct snd_dma_buffer *dmab, |
| 28 | int direction) |
| 29 | { |
| 30 | struct hdac_ext_stream *dsp_stream; |
| 31 | struct hdac_stream *hstream; |
| 32 | struct pci_dev *pci = to_pci_dev(sdev->dev); |
| 33 | int ret; |
| 34 | |
| 35 | if (direction != SNDRV_PCM_STREAM_PLAYBACK) { |
| 36 | dev_err(sdev->dev, "error: code loading DMA is playback only\n"); |
| 37 | return -EINVAL; |
| 38 | } |
| 39 | |
| 40 | dsp_stream = hda_dsp_stream_get(sdev, direction); |
| 41 | |
| 42 | if (!dsp_stream) { |
| 43 | dev_err(sdev->dev, "error: no stream available\n"); |
| 44 | return -ENODEV; |
| 45 | } |
| 46 | hstream = &dsp_stream->hstream; |
| 47 | |
| 48 | /* allocate DMA buffer */ |
| 49 | ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab); |
| 50 | if (ret < 0) { |
| 51 | dev_err(sdev->dev, "error: memory alloc failed: %x\n", ret); |
| 52 | goto error; |
| 53 | } |
| 54 | |
| 55 | hstream->period_bytes = 0;/* initialize period_bytes */ |
| 56 | hstream->format_val = format; |
| 57 | hstream->bufsize = size; |
| 58 | |
| 59 | ret = hda_dsp_stream_hw_params(sdev, dsp_stream, dmab, NULL); |
| 60 | if (ret < 0) { |
| 61 | dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret); |
| 62 | goto error; |
| 63 | } |
| 64 | |
| 65 | hda_dsp_stream_spib_config(sdev, dsp_stream, HDA_DSP_SPIB_ENABLE, size); |
| 66 | |
| 67 | return hstream->stream_tag; |
| 68 | |
| 69 | error: |
| 70 | hda_dsp_stream_put(sdev, direction, hstream->stream_tag); |
| 71 | snd_dma_free_pages(dmab); |
| 72 | return ret; |
| 73 | } |
| 74 | |
| 75 | /* |
| 76 | * first boot sequence has some extra steps. core 0 waits for power |
| 77 | * status on core 1, so power up core 1 also momentarily, keep it in |
| 78 | * reset/stall and then turn it off |
| 79 | */ |
| 80 | static int cl_dsp_init(struct snd_sof_dev *sdev, const void *fwdata, |
| 81 | u32 fwsize, int stream_tag) |
| 82 | { |
| 83 | struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; |
| 84 | const struct sof_intel_dsp_desc *chip = hda->desc; |
| 85 | unsigned int status; |
| 86 | int ret; |
Zhu Yingjiang | 74ed409 | 2019-04-30 18:09:22 -0500 | [diff] [blame] | 87 | int i; |
Liam Girdwood | d16046f | 2019-04-12 11:08:51 -0500 | [diff] [blame] | 88 | |
| 89 | /* step 1: power up corex */ |
| 90 | ret = hda_dsp_core_power_up(sdev, chip->cores_mask); |
| 91 | if (ret < 0) { |
| 92 | dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n"); |
| 93 | goto err; |
| 94 | } |
| 95 | |
Zhu Yingjiang | 74ed409 | 2019-04-30 18:09:22 -0500 | [diff] [blame] | 96 | /* DSP is powered up, set all SSPs to slave mode */ |
| 97 | for (i = 0; i < chip->ssp_count; i++) { |
| 98 | snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, |
| 99 | chip->ssp_base_offset |
| 100 | + i * SSP_DEV_MEM_SIZE |
| 101 | + SSP_SSC1_OFFSET, |
| 102 | SSP_SET_SLAVE, |
| 103 | SSP_SET_SLAVE); |
| 104 | } |
| 105 | |
Liam Girdwood | d16046f | 2019-04-12 11:08:51 -0500 | [diff] [blame] | 106 | /* step 2: purge FW request */ |
| 107 | snd_sof_dsp_write(sdev, HDA_DSP_BAR, chip->ipc_req, |
| 108 | chip->ipc_req_mask | (HDA_DSP_IPC_PURGE_FW | |
| 109 | ((stream_tag - 1) << 9))); |
| 110 | |
| 111 | /* step 3: unset core 0 reset state & unstall/run core 0 */ |
| 112 | ret = hda_dsp_core_run(sdev, HDA_DSP_CORE_MASK(0)); |
| 113 | if (ret < 0) { |
| 114 | dev_err(sdev->dev, "error: dsp core start failed %d\n", ret); |
| 115 | ret = -EIO; |
| 116 | goto err; |
| 117 | } |
| 118 | |
| 119 | /* step 4: wait for IPC DONE bit from ROM */ |
| 120 | ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, |
| 121 | chip->ipc_ack, status, |
| 122 | ((status & chip->ipc_ack_mask) |
| 123 | == chip->ipc_ack_mask), |
| 124 | HDA_DSP_REG_POLL_INTERVAL_US, |
| 125 | HDA_DSP_INIT_TIMEOUT_US); |
| 126 | |
| 127 | if (ret < 0) { |
| 128 | dev_err(sdev->dev, "error: waiting for HIPCIE done\n"); |
| 129 | goto err; |
| 130 | } |
| 131 | |
| 132 | /* step 5: power down corex */ |
| 133 | ret = hda_dsp_core_power_down(sdev, |
| 134 | chip->cores_mask & ~(HDA_DSP_CORE_MASK(0))); |
| 135 | if (ret < 0) { |
| 136 | dev_err(sdev->dev, "error: dsp core x power down failed\n"); |
| 137 | goto err; |
| 138 | } |
| 139 | |
| 140 | /* step 6: enable IPC interrupts */ |
| 141 | hda_dsp_ipc_int_enable(sdev); |
| 142 | |
| 143 | /* step 7: wait for ROM init */ |
| 144 | ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, |
| 145 | HDA_DSP_SRAM_REG_ROM_STATUS, status, |
| 146 | ((status & HDA_DSP_ROM_STS_MASK) |
| 147 | == HDA_DSP_ROM_INIT), |
| 148 | HDA_DSP_REG_POLL_INTERVAL_US, |
| 149 | chip->rom_init_timeout * |
| 150 | USEC_PER_MSEC); |
| 151 | if (!ret) |
| 152 | return 0; |
| 153 | |
| 154 | err: |
| 155 | hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX); |
| 156 | hda_dsp_core_reset_power_down(sdev, chip->cores_mask); |
| 157 | |
| 158 | return ret; |
| 159 | } |
| 160 | |
| 161 | static int cl_trigger(struct snd_sof_dev *sdev, |
| 162 | struct hdac_ext_stream *stream, int cmd) |
| 163 | { |
| 164 | struct hdac_stream *hstream = &stream->hstream; |
| 165 | int sd_offset = SOF_STREAM_SD_OFFSET(hstream); |
| 166 | |
| 167 | /* code loader is special case that reuses stream ops */ |
| 168 | switch (cmd) { |
| 169 | case SNDRV_PCM_TRIGGER_START: |
| 170 | wait_event_timeout(sdev->waitq, !sdev->code_loading, |
| 171 | HDA_DSP_CL_TRIGGER_TIMEOUT); |
| 172 | |
| 173 | snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL, |
| 174 | 1 << hstream->index, |
| 175 | 1 << hstream->index); |
| 176 | |
| 177 | snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, |
| 178 | sd_offset, |
| 179 | SOF_HDA_SD_CTL_DMA_START | |
| 180 | SOF_HDA_CL_DMA_SD_INT_MASK, |
| 181 | SOF_HDA_SD_CTL_DMA_START | |
| 182 | SOF_HDA_CL_DMA_SD_INT_MASK); |
| 183 | |
| 184 | hstream->running = true; |
| 185 | return 0; |
| 186 | default: |
| 187 | return hda_dsp_stream_trigger(sdev, stream, cmd); |
| 188 | } |
| 189 | } |
| 190 | |
| 191 | static struct hdac_ext_stream *get_stream_with_tag(struct snd_sof_dev *sdev, |
| 192 | int tag) |
| 193 | { |
| 194 | struct hdac_bus *bus = sof_to_bus(sdev); |
| 195 | struct hdac_stream *s; |
| 196 | |
| 197 | /* get stream with tag */ |
| 198 | list_for_each_entry(s, &bus->stream_list, list) { |
| 199 | if (s->direction == SNDRV_PCM_STREAM_PLAYBACK && |
| 200 | s->stream_tag == tag) { |
| 201 | return stream_to_hdac_ext_stream(s); |
| 202 | } |
| 203 | } |
| 204 | |
| 205 | return NULL; |
| 206 | } |
| 207 | |
| 208 | static int cl_cleanup(struct snd_sof_dev *sdev, struct snd_dma_buffer *dmab, |
| 209 | struct hdac_ext_stream *stream) |
| 210 | { |
| 211 | struct hdac_stream *hstream = &stream->hstream; |
| 212 | int sd_offset = SOF_STREAM_SD_OFFSET(hstream); |
| 213 | int ret; |
| 214 | |
| 215 | ret = hda_dsp_stream_spib_config(sdev, stream, HDA_DSP_SPIB_DISABLE, 0); |
| 216 | |
| 217 | hda_dsp_stream_put(sdev, SNDRV_PCM_STREAM_PLAYBACK, |
| 218 | hstream->stream_tag); |
| 219 | hstream->running = 0; |
| 220 | hstream->substream = NULL; |
| 221 | |
| 222 | /* reset BDL address */ |
| 223 | snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, |
| 224 | sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL, 0); |
| 225 | snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, |
| 226 | sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0); |
| 227 | |
| 228 | snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset, 0); |
| 229 | snd_dma_free_pages(dmab); |
| 230 | dmab->area = NULL; |
| 231 | hstream->bufsize = 0; |
| 232 | hstream->format_val = 0; |
| 233 | |
| 234 | return ret; |
| 235 | } |
| 236 | |
| 237 | static int cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *stream) |
| 238 | { |
| 239 | unsigned int reg; |
| 240 | int ret, status; |
| 241 | |
| 242 | ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_START); |
| 243 | if (ret < 0) { |
| 244 | dev_err(sdev->dev, "error: DMA trigger start failed\n"); |
| 245 | return ret; |
| 246 | } |
| 247 | |
| 248 | status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, |
| 249 | HDA_DSP_SRAM_REG_ROM_STATUS, reg, |
| 250 | ((reg & HDA_DSP_ROM_STS_MASK) |
| 251 | == HDA_DSP_ROM_FW_ENTERED), |
| 252 | HDA_DSP_REG_POLL_INTERVAL_US, |
| 253 | HDA_DSP_BASEFW_TIMEOUT_US); |
| 254 | |
| 255 | ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_STOP); |
| 256 | if (ret < 0) { |
| 257 | dev_err(sdev->dev, "error: DMA trigger stop failed\n"); |
| 258 | return ret; |
| 259 | } |
| 260 | |
| 261 | return status; |
| 262 | } |
| 263 | |
| 264 | int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev) |
| 265 | { |
| 266 | struct snd_sof_pdata *plat_data = sdev->pdata; |
| 267 | const struct sof_dev_desc *desc = plat_data->desc; |
| 268 | const struct sof_intel_dsp_desc *chip_info; |
| 269 | struct hdac_ext_stream *stream; |
| 270 | struct firmware stripped_firmware; |
| 271 | int ret, ret1, tag, i; |
| 272 | |
| 273 | chip_info = desc->chip_info; |
| 274 | |
| 275 | stripped_firmware.data = plat_data->fw->data; |
| 276 | stripped_firmware.size = plat_data->fw->size; |
| 277 | |
| 278 | /* init for booting wait */ |
| 279 | init_waitqueue_head(&sdev->boot_wait); |
| 280 | sdev->boot_complete = false; |
| 281 | |
| 282 | /* prepare DMA for code loader stream */ |
| 283 | tag = cl_stream_prepare(sdev, 0x40, stripped_firmware.size, |
| 284 | &sdev->dmab, SNDRV_PCM_STREAM_PLAYBACK); |
| 285 | |
| 286 | if (tag < 0) { |
| 287 | dev_err(sdev->dev, "error: dma prepare for fw loading err: %x\n", |
| 288 | tag); |
| 289 | return tag; |
| 290 | } |
| 291 | |
| 292 | /* get stream with tag */ |
| 293 | stream = get_stream_with_tag(sdev, tag); |
| 294 | if (!stream) { |
| 295 | dev_err(sdev->dev, |
| 296 | "error: could not get stream with stream tag %d\n", |
| 297 | tag); |
| 298 | ret = -ENODEV; |
| 299 | goto err; |
| 300 | } |
| 301 | |
| 302 | memcpy(sdev->dmab.area, stripped_firmware.data, |
| 303 | stripped_firmware.size); |
| 304 | |
| 305 | /* try ROM init a few times before giving up */ |
| 306 | for (i = 0; i < HDA_FW_BOOT_ATTEMPTS; i++) { |
| 307 | ret = cl_dsp_init(sdev, stripped_firmware.data, |
| 308 | stripped_firmware.size, tag); |
| 309 | |
| 310 | /* don't retry anymore if successful */ |
| 311 | if (!ret) |
| 312 | break; |
| 313 | |
| 314 | dev_err(sdev->dev, "error: Error code=0x%x: FW status=0x%x\n", |
| 315 | snd_sof_dsp_read(sdev, HDA_DSP_BAR, |
| 316 | HDA_DSP_SRAM_REG_ROM_ERROR), |
| 317 | snd_sof_dsp_read(sdev, HDA_DSP_BAR, |
| 318 | HDA_DSP_SRAM_REG_ROM_STATUS)); |
| 319 | dev_err(sdev->dev, "error: iteration %d of Core En/ROM load failed: %d\n", |
| 320 | i, ret); |
| 321 | } |
| 322 | |
| 323 | if (i == HDA_FW_BOOT_ATTEMPTS) { |
| 324 | dev_err(sdev->dev, "error: dsp init failed after %d attempts with err: %d\n", |
| 325 | i, ret); |
| 326 | goto cleanup; |
| 327 | } |
| 328 | |
| 329 | /* |
| 330 | * at this point DSP ROM has been initialized and |
| 331 | * should be ready for code loading and firmware boot |
| 332 | */ |
| 333 | ret = cl_copy_fw(sdev, stream); |
| 334 | if (!ret) |
| 335 | dev_dbg(sdev->dev, "Firmware download successful, booting...\n"); |
| 336 | else |
| 337 | dev_err(sdev->dev, "error: load fw failed ret: %d\n", ret); |
| 338 | |
| 339 | cleanup: |
| 340 | /* |
| 341 | * Perform codeloader stream cleanup. |
| 342 | * This should be done even if firmware loading fails. |
| 343 | */ |
| 344 | ret1 = cl_cleanup(sdev, &sdev->dmab, stream); |
| 345 | if (ret1 < 0) { |
| 346 | dev_err(sdev->dev, "error: Code loader DSP cleanup failed\n"); |
| 347 | |
| 348 | /* set return value to indicate cleanup failure */ |
| 349 | ret = ret1; |
| 350 | } |
| 351 | |
| 352 | /* |
| 353 | * return master core id if both fw copy |
| 354 | * and stream clean up are successful |
| 355 | */ |
| 356 | if (!ret) |
| 357 | return chip_info->init_core_mask; |
| 358 | |
| 359 | /* dump dsp registers and disable DSP upon error */ |
| 360 | err: |
| 361 | hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX); |
| 362 | |
| 363 | /* disable DSP */ |
| 364 | snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR, |
| 365 | SOF_HDA_REG_PP_PPCTL, |
| 366 | SOF_HDA_PPCTL_GPROCEN, 0); |
| 367 | return ret; |
| 368 | } |
| 369 | |
| 370 | /* pre fw run operations */ |
| 371 | int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev) |
| 372 | { |
| 373 | /* disable clock gating and power gating */ |
| 374 | return hda_dsp_ctrl_clock_power_gating(sdev, false); |
| 375 | } |
| 376 | |
| 377 | /* post fw run operations */ |
| 378 | int hda_dsp_post_fw_run(struct snd_sof_dev *sdev) |
| 379 | { |
| 380 | /* re-enable clock gating and power gating */ |
| 381 | return hda_dsp_ctrl_clock_power_gating(sdev, true); |
| 382 | } |