Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
Jisheng Zhang | dab1067 | 2019-08-29 06:49:18 +0000 | [diff] [blame] | 2 | // |
| 3 | // SY8824C/SY8824E regulator driver |
| 4 | // |
| 5 | // Copyright (C) 2019 Synaptics Incorporated |
| 6 | // |
| 7 | // Author: Jisheng Zhang <jszhang@kernel.org> |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 8 | |
| 9 | #include <linux/module.h> |
| 10 | #include <linux/i2c.h> |
| 11 | #include <linux/of_device.h> |
| 12 | #include <linux/regmap.h> |
| 13 | #include <linux/regulator/driver.h> |
| 14 | #include <linux/regulator/of_regulator.h> |
| 15 | |
Jisheng Zhang | e02e23d | 2019-08-29 06:50:46 +0000 | [diff] [blame] | 16 | #define SY8824C_BUCK_EN (1 << 7) |
| 17 | #define SY8824C_MODE (1 << 6) |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 18 | |
| 19 | struct sy8824_config { |
| 20 | /* registers */ |
| 21 | unsigned int vol_reg; |
| 22 | unsigned int mode_reg; |
| 23 | unsigned int enable_reg; |
| 24 | /* Voltage range and step(linear) */ |
| 25 | unsigned int vsel_min; |
| 26 | unsigned int vsel_step; |
| 27 | unsigned int vsel_count; |
| 28 | }; |
| 29 | |
| 30 | struct sy8824_device_info { |
| 31 | struct device *dev; |
| 32 | struct regulator_desc desc; |
| 33 | struct regulator_init_data *regulator; |
| 34 | const struct sy8824_config *cfg; |
| 35 | }; |
| 36 | |
| 37 | static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| 38 | { |
| 39 | struct sy8824_device_info *di = rdev_get_drvdata(rdev); |
| 40 | const struct sy8824_config *cfg = di->cfg; |
| 41 | |
| 42 | switch (mode) { |
| 43 | case REGULATOR_MODE_FAST: |
Jisheng Zhang | e02e23d | 2019-08-29 06:50:46 +0000 | [diff] [blame] | 44 | regmap_update_bits(rdev->regmap, cfg->mode_reg, |
| 45 | SY8824C_MODE, SY8824C_MODE); |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 46 | break; |
| 47 | case REGULATOR_MODE_NORMAL: |
Jisheng Zhang | e02e23d | 2019-08-29 06:50:46 +0000 | [diff] [blame] | 48 | regmap_update_bits(rdev->regmap, cfg->mode_reg, |
| 49 | SY8824C_MODE, 0); |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 50 | break; |
| 51 | default: |
| 52 | return -EINVAL; |
| 53 | } |
| 54 | return 0; |
| 55 | } |
| 56 | |
| 57 | static unsigned int sy8824_get_mode(struct regulator_dev *rdev) |
| 58 | { |
| 59 | struct sy8824_device_info *di = rdev_get_drvdata(rdev); |
| 60 | const struct sy8824_config *cfg = di->cfg; |
| 61 | u32 val; |
| 62 | int ret = 0; |
| 63 | |
| 64 | ret = regmap_read(rdev->regmap, cfg->mode_reg, &val); |
| 65 | if (ret < 0) |
| 66 | return ret; |
Jisheng Zhang | e02e23d | 2019-08-29 06:50:46 +0000 | [diff] [blame] | 67 | if (val & SY8824C_MODE) |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 68 | return REGULATOR_MODE_FAST; |
| 69 | else |
| 70 | return REGULATOR_MODE_NORMAL; |
| 71 | } |
| 72 | |
| 73 | static const struct regulator_ops sy8824_regulator_ops = { |
| 74 | .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| 75 | .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| 76 | .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| 77 | .map_voltage = regulator_map_voltage_linear, |
| 78 | .list_voltage = regulator_list_voltage_linear, |
| 79 | .enable = regulator_enable_regmap, |
| 80 | .disable = regulator_disable_regmap, |
| 81 | .is_enabled = regulator_is_enabled_regmap, |
| 82 | .set_mode = sy8824_set_mode, |
| 83 | .get_mode = sy8824_get_mode, |
| 84 | }; |
| 85 | |
| 86 | static int sy8824_regulator_register(struct sy8824_device_info *di, |
| 87 | struct regulator_config *config) |
| 88 | { |
| 89 | struct regulator_desc *rdesc = &di->desc; |
| 90 | const struct sy8824_config *cfg = di->cfg; |
| 91 | struct regulator_dev *rdev; |
| 92 | |
| 93 | rdesc->name = "sy8824-reg"; |
| 94 | rdesc->supply_name = "vin"; |
| 95 | rdesc->ops = &sy8824_regulator_ops; |
| 96 | rdesc->type = REGULATOR_VOLTAGE; |
| 97 | rdesc->n_voltages = cfg->vsel_count; |
| 98 | rdesc->enable_reg = cfg->enable_reg; |
Jisheng Zhang | e02e23d | 2019-08-29 06:50:46 +0000 | [diff] [blame] | 99 | rdesc->enable_mask = SY8824C_BUCK_EN; |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 100 | rdesc->min_uV = cfg->vsel_min; |
| 101 | rdesc->uV_step = cfg->vsel_step; |
| 102 | rdesc->vsel_reg = cfg->vol_reg; |
| 103 | rdesc->vsel_mask = cfg->vsel_count - 1; |
| 104 | rdesc->owner = THIS_MODULE; |
| 105 | |
| 106 | rdev = devm_regulator_register(di->dev, &di->desc, config); |
| 107 | return PTR_ERR_OR_ZERO(rdev); |
| 108 | } |
| 109 | |
| 110 | static const struct regmap_config sy8824_regmap_config = { |
| 111 | .reg_bits = 8, |
| 112 | .val_bits = 8, |
| 113 | }; |
| 114 | |
Axel Lin | 77e2959 | 2020-01-09 23:58:08 +0800 | [diff] [blame] | 115 | static int sy8824_i2c_probe(struct i2c_client *client) |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 116 | { |
| 117 | struct device *dev = &client->dev; |
| 118 | struct device_node *np = dev->of_node; |
| 119 | struct sy8824_device_info *di; |
| 120 | struct regulator_config config = { }; |
| 121 | struct regmap *regmap; |
| 122 | int ret; |
| 123 | |
| 124 | di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL); |
| 125 | if (!di) |
| 126 | return -ENOMEM; |
| 127 | |
| 128 | di->regulator = of_get_regulator_init_data(dev, np, &di->desc); |
| 129 | if (!di->regulator) { |
| 130 | dev_err(dev, "Platform data not found!\n"); |
| 131 | return -EINVAL; |
| 132 | } |
| 133 | |
| 134 | di->dev = dev; |
| 135 | di->cfg = of_device_get_match_data(dev); |
| 136 | |
| 137 | regmap = devm_regmap_init_i2c(client, &sy8824_regmap_config); |
| 138 | if (IS_ERR(regmap)) { |
| 139 | dev_err(dev, "Failed to allocate regmap!\n"); |
| 140 | return PTR_ERR(regmap); |
| 141 | } |
| 142 | i2c_set_clientdata(client, di); |
| 143 | |
| 144 | config.dev = di->dev; |
| 145 | config.init_data = di->regulator; |
| 146 | config.regmap = regmap; |
| 147 | config.driver_data = di; |
| 148 | config.of_node = np; |
| 149 | |
| 150 | ret = sy8824_regulator_register(di, &config); |
| 151 | if (ret < 0) |
| 152 | dev_err(dev, "Failed to register regulator!\n"); |
| 153 | return ret; |
| 154 | } |
| 155 | |
| 156 | static const struct sy8824_config sy8824c_cfg = { |
| 157 | .vol_reg = 0x00, |
| 158 | .mode_reg = 0x00, |
| 159 | .enable_reg = 0x00, |
| 160 | .vsel_min = 762500, |
| 161 | .vsel_step = 12500, |
| 162 | .vsel_count = 64, |
| 163 | }; |
| 164 | |
Jisheng Zhang | 67a7b05 | 2019-08-27 08:47:30 +0000 | [diff] [blame] | 165 | static const struct sy8824_config sy8824e_cfg = { |
| 166 | .vol_reg = 0x00, |
| 167 | .mode_reg = 0x00, |
| 168 | .enable_reg = 0x00, |
| 169 | .vsel_min = 700000, |
| 170 | .vsel_step = 12500, |
| 171 | .vsel_count = 64, |
| 172 | }; |
| 173 | |
Jisheng Zhang | 92fd0db | 2019-08-27 08:48:36 +0000 | [diff] [blame] | 174 | static const struct sy8824_config sy20276_cfg = { |
| 175 | .vol_reg = 0x00, |
| 176 | .mode_reg = 0x01, |
| 177 | .enable_reg = 0x01, |
| 178 | .vsel_min = 600000, |
| 179 | .vsel_step = 10000, |
| 180 | .vsel_count = 128, |
| 181 | }; |
| 182 | |
Jisheng Zhang | b60c2c4 | 2019-08-27 08:49:45 +0000 | [diff] [blame] | 183 | static const struct sy8824_config sy20278_cfg = { |
| 184 | .vol_reg = 0x00, |
| 185 | .mode_reg = 0x01, |
| 186 | .enable_reg = 0x01, |
| 187 | .vsel_min = 762500, |
| 188 | .vsel_step = 12500, |
| 189 | .vsel_count = 64, |
| 190 | }; |
| 191 | |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 192 | static const struct of_device_id sy8824_dt_ids[] = { |
| 193 | { |
| 194 | .compatible = "silergy,sy8824c", |
| 195 | .data = &sy8824c_cfg |
| 196 | }, |
Jisheng Zhang | 67a7b05 | 2019-08-27 08:47:30 +0000 | [diff] [blame] | 197 | { |
| 198 | .compatible = "silergy,sy8824e", |
| 199 | .data = &sy8824e_cfg |
| 200 | }, |
Jisheng Zhang | 92fd0db | 2019-08-27 08:48:36 +0000 | [diff] [blame] | 201 | { |
| 202 | .compatible = "silergy,sy20276", |
| 203 | .data = &sy20276_cfg |
| 204 | }, |
Jisheng Zhang | b60c2c4 | 2019-08-27 08:49:45 +0000 | [diff] [blame] | 205 | { |
| 206 | .compatible = "silergy,sy20278", |
| 207 | .data = &sy20278_cfg |
| 208 | }, |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 209 | { } |
| 210 | }; |
| 211 | MODULE_DEVICE_TABLE(of, sy8824_dt_ids); |
| 212 | |
| 213 | static const struct i2c_device_id sy8824_id[] = { |
| 214 | { "sy8824", }, |
| 215 | { }, |
| 216 | }; |
| 217 | MODULE_DEVICE_TABLE(i2c, sy8824_id); |
| 218 | |
| 219 | static struct i2c_driver sy8824_regulator_driver = { |
| 220 | .driver = { |
| 221 | .name = "sy8824-regulator", |
| 222 | .of_match_table = of_match_ptr(sy8824_dt_ids), |
| 223 | }, |
Axel Lin | 77e2959 | 2020-01-09 23:58:08 +0800 | [diff] [blame] | 224 | .probe_new = sy8824_i2c_probe, |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 225 | .id_table = sy8824_id, |
| 226 | }; |
| 227 | module_i2c_driver(sy8824_regulator_driver); |
| 228 | |
| 229 | MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); |
Jisheng Zhang | 67a7b05 | 2019-08-27 08:47:30 +0000 | [diff] [blame] | 230 | MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver"); |
Jisheng Zhang | d5a2b82 | 2019-08-27 08:45:33 +0000 | [diff] [blame] | 231 | MODULE_LICENSE("GPL v2"); |