Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 1 | /* |
| 2 | * GPIO driver for the SMSC SCH311x Super-I/O chips |
| 3 | * |
| 4 | * Copyright (C) 2013 Bruno Randolf <br1@einfach.org> |
| 5 | * |
| 6 | * SuperIO functions and chip detection: |
| 7 | * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License, or |
| 12 | * (at your option) any later version. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/platform_device.h> |
| 19 | #include <linux/gpio.h> |
| 20 | #include <linux/bitops.h> |
Linus Walleij | 523639e | 2013-12-23 18:12:48 +0100 | [diff] [blame] | 21 | #include <linux/io.h> |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 22 | |
| 23 | #define DRV_NAME "gpio-sch311x" |
| 24 | |
| 25 | #define SCH311X_GPIO_CONF_OUT 0x00 |
| 26 | #define SCH311X_GPIO_CONF_IN 0x01 |
| 27 | #define SCH311X_GPIO_CONF_INVERT 0x02 |
| 28 | #define SCH311X_GPIO_CONF_OPEN_DRAIN 0x80 |
| 29 | |
| 30 | #define SIO_CONFIG_KEY_ENTER 0x55 |
| 31 | #define SIO_CONFIG_KEY_EXIT 0xaa |
| 32 | |
| 33 | #define GP1 0x4b |
| 34 | |
| 35 | static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e }; |
| 36 | |
| 37 | static struct platform_device *sch311x_gpio_pdev; |
| 38 | |
| 39 | struct sch311x_pdev_data { /* platform device data */ |
| 40 | unsigned short runtime_reg; /* runtime register base address */ |
| 41 | }; |
| 42 | |
| 43 | struct sch311x_gpio_block { /* one GPIO block runtime data */ |
| 44 | struct gpio_chip chip; |
| 45 | unsigned short data_reg; /* from definition below */ |
| 46 | unsigned short *config_regs; /* pointer to definition below */ |
| 47 | unsigned short runtime_reg; /* runtime register */ |
| 48 | spinlock_t lock; /* lock for this GPIO block */ |
| 49 | }; |
| 50 | |
| 51 | struct sch311x_gpio_priv { /* driver private data */ |
| 52 | struct sch311x_gpio_block blocks[6]; |
| 53 | }; |
| 54 | |
| 55 | struct sch311x_gpio_block_def { /* register address definitions */ |
| 56 | unsigned short data_reg; |
| 57 | unsigned short config_regs[8]; |
| 58 | unsigned short base; |
| 59 | }; |
| 60 | |
| 61 | /* Note: some GPIOs are not available, these are marked with 0x00 */ |
| 62 | |
| 63 | static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = { |
| 64 | { |
| 65 | .data_reg = 0x4b, /* GP1 */ |
| 66 | .config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b}, |
| 67 | .base = 10, |
| 68 | }, |
| 69 | { |
| 70 | .data_reg = 0x4c, /* GP2 */ |
| 71 | .config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32}, |
| 72 | .base = 20, |
| 73 | }, |
| 74 | { |
| 75 | .data_reg = 0x4d, /* GP3 */ |
| 76 | .config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a}, |
| 77 | .base = 30, |
| 78 | }, |
| 79 | { |
| 80 | .data_reg = 0x4e, /* GP4 */ |
| 81 | .config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73}, |
| 82 | .base = 40, |
| 83 | }, |
| 84 | { |
| 85 | .data_reg = 0x4f, /* GP5 */ |
| 86 | .config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46}, |
| 87 | .base = 50, |
| 88 | }, |
| 89 | { |
| 90 | .data_reg = 0x50, /* GP6 */ |
| 91 | .config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59}, |
| 92 | .base = 60, |
| 93 | }, |
| 94 | }; |
| 95 | |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 96 | /* |
| 97 | * Super-IO functions |
| 98 | */ |
| 99 | |
| 100 | static inline int sch311x_sio_enter(int sio_config_port) |
| 101 | { |
| 102 | /* Don't step on other drivers' I/O space by accident. */ |
| 103 | if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) { |
| 104 | pr_err(DRV_NAME "I/O address 0x%04x already in use\n", |
| 105 | sio_config_port); |
| 106 | return -EBUSY; |
| 107 | } |
| 108 | |
| 109 | outb(SIO_CONFIG_KEY_ENTER, sio_config_port); |
| 110 | return 0; |
| 111 | } |
| 112 | |
| 113 | static inline void sch311x_sio_exit(int sio_config_port) |
| 114 | { |
| 115 | outb(SIO_CONFIG_KEY_EXIT, sio_config_port); |
| 116 | release_region(sio_config_port, 2); |
| 117 | } |
| 118 | |
| 119 | static inline int sch311x_sio_inb(int sio_config_port, int reg) |
| 120 | { |
| 121 | outb(reg, sio_config_port); |
| 122 | return inb(sio_config_port + 1); |
| 123 | } |
| 124 | |
| 125 | static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) |
| 126 | { |
| 127 | outb(reg, sio_config_port); |
| 128 | outb(val, sio_config_port + 1); |
| 129 | } |
| 130 | |
| 131 | |
| 132 | /* |
| 133 | * GPIO functions |
| 134 | */ |
| 135 | |
| 136 | static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset) |
| 137 | { |
Linus Walleij | 8ca7f1f | 2015-12-07 14:24:24 +0100 | [diff] [blame] | 138 | struct sch311x_gpio_block *block = gpiochip_get_data(chip); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 139 | |
| 140 | if (block->config_regs[offset] == 0) /* GPIO is not available */ |
| 141 | return -ENODEV; |
| 142 | |
| 143 | if (!request_region(block->runtime_reg + block->config_regs[offset], |
| 144 | 1, DRV_NAME)) { |
Linus Walleij | 58383c78 | 2015-11-04 09:56:26 +0100 | [diff] [blame] | 145 | dev_err(chip->parent, "Failed to request region 0x%04x.\n", |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 146 | block->runtime_reg + block->config_regs[offset]); |
| 147 | return -EBUSY; |
| 148 | } |
| 149 | return 0; |
| 150 | } |
| 151 | |
| 152 | static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset) |
| 153 | { |
Linus Walleij | 8ca7f1f | 2015-12-07 14:24:24 +0100 | [diff] [blame] | 154 | struct sch311x_gpio_block *block = gpiochip_get_data(chip); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 155 | |
| 156 | if (block->config_regs[offset] == 0) /* GPIO is not available */ |
| 157 | return; |
| 158 | |
| 159 | release_region(block->runtime_reg + block->config_regs[offset], 1); |
| 160 | } |
| 161 | |
| 162 | static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset) |
| 163 | { |
Linus Walleij | 8ca7f1f | 2015-12-07 14:24:24 +0100 | [diff] [blame] | 164 | struct sch311x_gpio_block *block = gpiochip_get_data(chip); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 165 | unsigned char data; |
| 166 | |
| 167 | spin_lock(&block->lock); |
| 168 | data = inb(block->runtime_reg + block->data_reg); |
| 169 | spin_unlock(&block->lock); |
| 170 | |
| 171 | return !!(data & BIT(offset)); |
| 172 | } |
| 173 | |
| 174 | static void __sch311x_gpio_set(struct sch311x_gpio_block *block, |
| 175 | unsigned offset, int value) |
| 176 | { |
| 177 | unsigned char data = inb(block->runtime_reg + block->data_reg); |
| 178 | if (value) |
| 179 | data |= BIT(offset); |
| 180 | else |
| 181 | data &= ~BIT(offset); |
| 182 | outb(data, block->runtime_reg + block->data_reg); |
| 183 | } |
| 184 | |
| 185 | static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset, |
| 186 | int value) |
| 187 | { |
Linus Walleij | 8ca7f1f | 2015-12-07 14:24:24 +0100 | [diff] [blame] | 188 | struct sch311x_gpio_block *block = gpiochip_get_data(chip); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 189 | |
| 190 | spin_lock(&block->lock); |
| 191 | __sch311x_gpio_set(block, offset, value); |
| 192 | spin_unlock(&block->lock); |
| 193 | } |
| 194 | |
| 195 | static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) |
| 196 | { |
Linus Walleij | 8ca7f1f | 2015-12-07 14:24:24 +0100 | [diff] [blame] | 197 | struct sch311x_gpio_block *block = gpiochip_get_data(chip); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 198 | |
| 199 | spin_lock(&block->lock); |
| 200 | outb(SCH311X_GPIO_CONF_IN, block->runtime_reg + |
| 201 | block->config_regs[offset]); |
| 202 | spin_unlock(&block->lock); |
| 203 | |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset, |
| 208 | int value) |
| 209 | { |
Linus Walleij | 8ca7f1f | 2015-12-07 14:24:24 +0100 | [diff] [blame] | 210 | struct sch311x_gpio_block *block = gpiochip_get_data(chip); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 211 | |
| 212 | spin_lock(&block->lock); |
| 213 | |
| 214 | outb(SCH311X_GPIO_CONF_OUT, block->runtime_reg + |
| 215 | block->config_regs[offset]); |
| 216 | |
| 217 | __sch311x_gpio_set(block, offset, value); |
| 218 | |
| 219 | spin_unlock(&block->lock); |
| 220 | return 0; |
| 221 | } |
| 222 | |
| 223 | static int sch311x_gpio_probe(struct platform_device *pdev) |
| 224 | { |
Nizam Haider | ab128af | 2015-11-23 20:53:18 +0530 | [diff] [blame] | 225 | struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 226 | struct sch311x_gpio_priv *priv; |
| 227 | struct sch311x_gpio_block *block; |
| 228 | int err, i; |
| 229 | |
| 230 | /* we can register all GPIO data registers at once */ |
| 231 | if (!request_region(pdata->runtime_reg + GP1, 6, DRV_NAME)) { |
| 232 | dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n", |
| 233 | pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5); |
| 234 | return -EBUSY; |
| 235 | } |
| 236 | |
| 237 | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| 238 | if (!priv) |
| 239 | return -ENOMEM; |
| 240 | |
| 241 | platform_set_drvdata(pdev, priv); |
| 242 | |
| 243 | for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { |
| 244 | block = &priv->blocks[i]; |
| 245 | |
| 246 | spin_lock_init(&block->lock); |
| 247 | |
| 248 | block->chip.label = DRV_NAME; |
| 249 | block->chip.owner = THIS_MODULE; |
| 250 | block->chip.request = sch311x_gpio_request; |
| 251 | block->chip.free = sch311x_gpio_free; |
| 252 | block->chip.direction_input = sch311x_gpio_direction_in; |
| 253 | block->chip.direction_output = sch311x_gpio_direction_out; |
| 254 | block->chip.get = sch311x_gpio_get; |
| 255 | block->chip.set = sch311x_gpio_set; |
| 256 | block->chip.ngpio = 8; |
Linus Walleij | 58383c78 | 2015-11-04 09:56:26 +0100 | [diff] [blame] | 257 | block->chip.parent = &pdev->dev; |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 258 | block->chip.base = sch311x_gpio_blocks[i].base; |
| 259 | block->config_regs = sch311x_gpio_blocks[i].config_regs; |
| 260 | block->data_reg = sch311x_gpio_blocks[i].data_reg; |
| 261 | block->runtime_reg = pdata->runtime_reg; |
| 262 | |
Linus Walleij | 8ca7f1f | 2015-12-07 14:24:24 +0100 | [diff] [blame] | 263 | err = gpiochip_add_data(&block->chip, block); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 264 | if (err < 0) { |
| 265 | dev_err(&pdev->dev, |
| 266 | "Could not register gpiochip, %d\n", err); |
| 267 | goto exit_err; |
| 268 | } |
| 269 | dev_info(&pdev->dev, |
| 270 | "SMSC SCH311x GPIO block %d registered.\n", i); |
| 271 | } |
| 272 | |
| 273 | return 0; |
| 274 | |
| 275 | exit_err: |
| 276 | release_region(pdata->runtime_reg + GP1, 6); |
| 277 | /* release already registered chips */ |
| 278 | for (--i; i >= 0; i--) |
| 279 | gpiochip_remove(&priv->blocks[i].chip); |
| 280 | return err; |
| 281 | } |
| 282 | |
| 283 | static int sch311x_gpio_remove(struct platform_device *pdev) |
| 284 | { |
Nizam Haider | ab128af | 2015-11-23 20:53:18 +0530 | [diff] [blame] | 285 | struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 286 | struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev); |
abdoulaye berthe | 9f5132a | 2014-07-12 22:30:12 +0200 | [diff] [blame] | 287 | int i; |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 288 | |
| 289 | release_region(pdata->runtime_reg + GP1, 6); |
| 290 | |
| 291 | for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { |
abdoulaye berthe | 9f5132a | 2014-07-12 22:30:12 +0200 | [diff] [blame] | 292 | gpiochip_remove(&priv->blocks[i].chip); |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 293 | dev_info(&pdev->dev, |
| 294 | "SMSC SCH311x GPIO block %d unregistered.\n", i); |
| 295 | } |
| 296 | return 0; |
| 297 | } |
| 298 | |
| 299 | static struct platform_driver sch311x_gpio_driver = { |
| 300 | .driver.name = DRV_NAME, |
| 301 | .driver.owner = THIS_MODULE, |
| 302 | .probe = sch311x_gpio_probe, |
| 303 | .remove = sch311x_gpio_remove, |
| 304 | }; |
| 305 | |
| 306 | |
| 307 | /* |
| 308 | * Init & exit routines |
| 309 | */ |
| 310 | |
| 311 | static int __init sch311x_detect(int sio_config_port, unsigned short *addr) |
| 312 | { |
| 313 | int err = 0, reg; |
| 314 | unsigned short base_addr; |
| 315 | unsigned char dev_id; |
| 316 | |
| 317 | err = sch311x_sio_enter(sio_config_port); |
| 318 | if (err) |
| 319 | return err; |
| 320 | |
Axel Lin | 7e9fcc9 | 2014-04-15 10:15:27 +0800 | [diff] [blame] | 321 | /* Check device ID. */ |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 322 | reg = sch311x_sio_inb(sio_config_port, 0x20); |
Axel Lin | 7e9fcc9 | 2014-04-15 10:15:27 +0800 | [diff] [blame] | 323 | switch (reg) { |
| 324 | case 0x7c: /* SCH3112 */ |
| 325 | dev_id = 2; |
| 326 | break; |
| 327 | case 0x7d: /* SCH3114 */ |
| 328 | dev_id = 4; |
| 329 | break; |
| 330 | case 0x7f: /* SCH3116 */ |
| 331 | dev_id = 6; |
| 332 | break; |
| 333 | default: |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 334 | err = -ENODEV; |
| 335 | goto exit; |
| 336 | } |
Bruno Randolf | 12262be | 2013-12-04 23:56:43 +0000 | [diff] [blame] | 337 | |
| 338 | /* Select logical device A (runtime registers) */ |
| 339 | sch311x_sio_outb(sio_config_port, 0x07, 0x0a); |
| 340 | |
| 341 | /* Check if Logical Device Register is currently active */ |
| 342 | if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) |
| 343 | pr_info("Seems that LDN 0x0a is not active...\n"); |
| 344 | |
| 345 | /* Get the base address of the runtime registers */ |
| 346 | base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | |
| 347 | sch311x_sio_inb(sio_config_port, 0x61); |
| 348 | if (!base_addr) { |
| 349 | pr_err("Base address not set\n"); |
| 350 | err = -ENODEV; |
| 351 | goto exit; |
| 352 | } |
| 353 | *addr = base_addr; |
| 354 | |
| 355 | pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr); |
| 356 | |
| 357 | exit: |
| 358 | sch311x_sio_exit(sio_config_port); |
| 359 | return err; |
| 360 | } |
| 361 | |
| 362 | static int __init sch311x_gpio_pdev_add(const unsigned short addr) |
| 363 | { |
| 364 | struct sch311x_pdev_data pdata; |
| 365 | int err; |
| 366 | |
| 367 | pdata.runtime_reg = addr; |
| 368 | |
| 369 | sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1); |
| 370 | if (!sch311x_gpio_pdev) |
| 371 | return -ENOMEM; |
| 372 | |
| 373 | err = platform_device_add_data(sch311x_gpio_pdev, |
| 374 | &pdata, sizeof(pdata)); |
| 375 | if (err) { |
| 376 | pr_err(DRV_NAME "Platform data allocation failed\n"); |
| 377 | goto err; |
| 378 | } |
| 379 | |
| 380 | err = platform_device_add(sch311x_gpio_pdev); |
| 381 | if (err) { |
| 382 | pr_err(DRV_NAME "Device addition failed\n"); |
| 383 | goto err; |
| 384 | } |
| 385 | return 0; |
| 386 | |
| 387 | err: |
| 388 | platform_device_put(sch311x_gpio_pdev); |
| 389 | return err; |
| 390 | } |
| 391 | |
| 392 | static int __init sch311x_gpio_init(void) |
| 393 | { |
| 394 | int err, i; |
| 395 | unsigned short addr = 0; |
| 396 | |
| 397 | for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++) |
| 398 | if (sch311x_detect(sch311x_ioports[i], &addr) == 0) |
| 399 | break; |
| 400 | |
| 401 | if (!addr) |
| 402 | return -ENODEV; |
| 403 | |
| 404 | err = platform_driver_register(&sch311x_gpio_driver); |
| 405 | if (err) |
| 406 | return err; |
| 407 | |
| 408 | err = sch311x_gpio_pdev_add(addr); |
| 409 | if (err) |
| 410 | goto unreg_platform_driver; |
| 411 | |
| 412 | return 0; |
| 413 | |
| 414 | unreg_platform_driver: |
| 415 | platform_driver_unregister(&sch311x_gpio_driver); |
| 416 | return err; |
| 417 | } |
| 418 | |
| 419 | static void __exit sch311x_gpio_exit(void) |
| 420 | { |
| 421 | platform_device_unregister(sch311x_gpio_pdev); |
| 422 | platform_driver_unregister(&sch311x_gpio_driver); |
| 423 | } |
| 424 | |
| 425 | module_init(sch311x_gpio_init); |
| 426 | module_exit(sch311x_gpio_exit); |
| 427 | |
| 428 | MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>"); |
| 429 | MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver"); |
| 430 | MODULE_LICENSE("GPL"); |
| 431 | MODULE_ALIAS("platform:gpio-sch311x"); |