Alexandrov Stansilav | 9a6a419 | 2018-01-14 02:33:49 +0300 | [diff] [blame] | 1 | /* |
| 2 | * HID Driver for ELAN Touchpad |
| 3 | * |
| 4 | * Currently only supports touchpad found on HP Pavilion X2 10 |
| 5 | * |
| 6 | * Copyright (c) 2016 Alexandrov Stanislav <neko@nya.ai> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License as published by the Free |
| 10 | * Software Foundation; either version 2 of the License, or (at your option) |
| 11 | * any later version. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/hid.h> |
| 15 | #include <linux/input/mt.h> |
| 16 | #include <linux/leds.h> |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/usb.h> |
| 19 | |
| 20 | #include "hid-ids.h" |
| 21 | |
| 22 | #define ELAN_SINGLE_FINGER 0x81 |
| 23 | #define ELAN_MT_FIRST_FINGER 0x82 |
| 24 | #define ELAN_MT_SECOND_FINGER 0x83 |
| 25 | #define ELAN_INPUT_REPORT_SIZE 8 |
| 26 | |
| 27 | #define ELAN_MUTE_LED_REPORT 0xBC |
| 28 | #define ELAN_LED_REPORT_SIZE 8 |
| 29 | |
| 30 | struct elan_touchpad_settings { |
| 31 | u8 max_fingers; |
| 32 | u16 max_x; |
| 33 | u16 max_y; |
| 34 | u8 max_area_x; |
| 35 | u8 max_area_y; |
| 36 | u8 max_w; |
| 37 | int usb_bInterfaceNumber; |
| 38 | }; |
| 39 | |
| 40 | struct elan_drvdata { |
| 41 | struct input_dev *input; |
| 42 | u8 prev_report[ELAN_INPUT_REPORT_SIZE]; |
| 43 | struct led_classdev mute_led; |
| 44 | u8 mute_led_state; |
| 45 | struct elan_touchpad_settings *settings; |
| 46 | }; |
| 47 | |
| 48 | static int is_not_elan_touchpad(struct hid_device *hdev) |
| 49 | { |
| 50 | struct usb_interface *intf = to_usb_interface(hdev->dev.parent); |
| 51 | struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| 52 | |
| 53 | return (intf->altsetting->desc.bInterfaceNumber != drvdata->settings->usb_bInterfaceNumber); |
| 54 | } |
| 55 | |
| 56 | static int elan_input_mapping(struct hid_device *hdev, struct hid_input *hi, |
| 57 | struct hid_field *field, struct hid_usage *usage, |
| 58 | unsigned long **bit, int *max) |
| 59 | { |
| 60 | if (is_not_elan_touchpad(hdev)) |
| 61 | return 0; |
| 62 | |
| 63 | if (field->report->id == ELAN_SINGLE_FINGER || |
| 64 | field->report->id == ELAN_MT_FIRST_FINGER || |
| 65 | field->report->id == ELAN_MT_SECOND_FINGER) |
| 66 | return -1; |
| 67 | |
| 68 | return 0; |
| 69 | } |
| 70 | |
| 71 | static int elan_input_configured(struct hid_device *hdev, struct hid_input *hi) |
| 72 | { |
| 73 | int ret; |
| 74 | struct input_dev *input; |
| 75 | struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| 76 | |
| 77 | if (is_not_elan_touchpad(hdev)) |
| 78 | return 0; |
| 79 | |
| 80 | input = devm_input_allocate_device(&hdev->dev); |
| 81 | if (!input) |
| 82 | return -ENOMEM; |
| 83 | |
| 84 | input->name = "Elan Touchpad"; |
| 85 | input->phys = hdev->phys; |
| 86 | input->uniq = hdev->uniq; |
| 87 | input->id.bustype = hdev->bus; |
| 88 | input->id.vendor = hdev->vendor; |
| 89 | input->id.product = hdev->product; |
| 90 | input->id.version = hdev->version; |
| 91 | input->dev.parent = &hdev->dev; |
| 92 | |
| 93 | input_set_abs_params(input, ABS_MT_POSITION_X, 0, |
| 94 | drvdata->settings->max_x, 0, 0); |
| 95 | input_set_abs_params(input, ABS_MT_POSITION_Y, 0, |
| 96 | drvdata->settings->max_y, 0, 0); |
| 97 | input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, |
| 98 | drvdata->settings->max_fingers, 0, 0); |
| 99 | input_set_abs_params(input, ABS_TOOL_WIDTH, 0, |
| 100 | drvdata->settings->max_w, 0, 0); |
| 101 | |
| 102 | __set_bit(BTN_LEFT, input->keybit); |
| 103 | __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); |
| 104 | |
| 105 | ret = input_mt_init_slots(input, drvdata->settings->max_fingers, |
| 106 | INPUT_MT_POINTER); |
| 107 | if (ret) { |
| 108 | hid_err(hdev, "Failed to init elan MT slots: %d\n", ret); |
| 109 | return ret; |
| 110 | } |
| 111 | |
| 112 | ret = input_register_device(input); |
| 113 | if (ret) { |
| 114 | hid_err(hdev, "Failed to register elan input device: %d\n", |
| 115 | ret); |
| 116 | input_free_device(input); |
| 117 | return ret; |
| 118 | } |
| 119 | |
| 120 | drvdata->input = input; |
| 121 | |
| 122 | return 0; |
| 123 | } |
| 124 | |
| 125 | static void elan_report_mt_slot(struct elan_drvdata *drvdata, u8 *data, |
| 126 | unsigned int slot_num) |
| 127 | { |
| 128 | struct input_dev *input = drvdata->input; |
| 129 | int x, y, w; |
| 130 | |
| 131 | bool active = !!data; |
| 132 | |
| 133 | input_mt_slot(input, slot_num); |
| 134 | input_mt_report_slot_state(input, MT_TOOL_FINGER, active); |
| 135 | if (active) { |
| 136 | x = ((data[0] & 0xF0) << 4) | data[1]; |
| 137 | y = drvdata->settings->max_y - |
| 138 | (((data[0] & 0x07) << 8) | data[2]); |
| 139 | w = data[4]; |
| 140 | |
| 141 | input_report_abs(input, ABS_MT_POSITION_X, x); |
| 142 | input_report_abs(input, ABS_MT_POSITION_Y, y); |
| 143 | input_report_abs(input, ABS_TOOL_WIDTH, w); |
| 144 | } |
| 145 | } |
| 146 | |
| 147 | static void elan_report_input(struct elan_drvdata *drvdata, u8 *data) |
| 148 | { |
| 149 | int i; |
| 150 | struct input_dev *input = drvdata->input; |
| 151 | |
| 152 | /* |
| 153 | * There is 3 types of reports: for single touch, |
| 154 | * for multitouch - first finger and for multitouch - second finger |
| 155 | * |
| 156 | * packet structure for ELAN_SINGLE_FINGER and ELAN_MT_FIRST_FINGER: |
| 157 | * |
| 158 | * byte 1: 1 0 0 0 0 0 0 1 // 0x81 or 0x82 |
| 159 | * byte 2: 0 0 0 0 0 0 0 0 // looks like unused |
| 160 | * byte 3: f5 f4 f3 f2 f1 0 0 L |
| 161 | * byte 4: x12 x11 x10 x9 0? y11 y10 y9 |
| 162 | * byte 5: x8 x7 x6 x5 x4 x3 x2 x1 |
| 163 | * byte 6: y8 y7 y6 y5 y4 y3 y2 y1 |
| 164 | * byte 7: sy4 sy3 sy2 sy1 sx4 sx3 sx2 sx1 |
| 165 | * byte 8: w8 w7 w6 w5 w4 w3 w2 w1 |
| 166 | * |
| 167 | * packet structure for ELAN_MT_SECOND_FINGER: |
| 168 | * |
| 169 | * byte 1: 1 0 0 0 0 0 1 1 // 0x83 |
| 170 | * byte 2: x12 x11 x10 x9 0 y11 y10 y9 |
| 171 | * byte 3: x8 x7 x6 x5 x4 x3 x2 x1 |
| 172 | * byte 4: y8 y7 y6 y5 y4 y3 y2 y1 |
| 173 | * byte 5: sy4 sy3 sy2 sy1 sx4 sx3 sx2 sx1 |
| 174 | * byte 6: w8 w7 w6 w5 w4 w3 w2 w1 |
| 175 | * byte 7: 0 0 0 0 0 0 0 0 |
| 176 | * byte 8: 0 0 0 0 0 0 0 0 |
| 177 | * |
| 178 | * f5-f1: finger touch bits |
| 179 | * L: clickpad button |
| 180 | * sy / sx: not sure yet, but this looks like rectangular |
| 181 | * area for finger |
| 182 | * w: looks like finger width |
| 183 | */ |
| 184 | |
| 185 | if (data[0] == ELAN_SINGLE_FINGER) { |
| 186 | for (i = 0; i < drvdata->settings->max_fingers; i++) { |
| 187 | if (data[2] & BIT(i + 3)) |
| 188 | elan_report_mt_slot(drvdata, data + 3, i); |
| 189 | else |
| 190 | elan_report_mt_slot(drvdata, NULL, i); |
| 191 | } |
| 192 | input_report_key(input, BTN_LEFT, data[2] & 0x01); |
| 193 | } |
| 194 | /* |
| 195 | * When touched with two fingers Elan touchpad will emit two HID reports |
| 196 | * first is ELAN_MT_FIRST_FINGER and second is ELAN_MT_SECOND_FINGER |
| 197 | * we will save ELAN_MT_FIRST_FINGER report and wait for |
| 198 | * ELAN_MT_SECOND_FINGER to finish multitouch |
| 199 | */ |
| 200 | if (data[0] == ELAN_MT_FIRST_FINGER) { |
| 201 | memcpy(drvdata->prev_report, data, |
| 202 | sizeof(drvdata->prev_report)); |
| 203 | return; |
| 204 | } |
| 205 | |
| 206 | if (data[0] == ELAN_MT_SECOND_FINGER) { |
| 207 | int first = 0; |
| 208 | u8 *prev_report = drvdata->prev_report; |
| 209 | |
| 210 | if (prev_report[0] != ELAN_MT_FIRST_FINGER) |
| 211 | return; |
| 212 | |
| 213 | for (i = 0; i < drvdata->settings->max_fingers; i++) { |
| 214 | if (prev_report[2] & BIT(i + 3)) { |
| 215 | if (!first) { |
| 216 | first = 1; |
| 217 | elan_report_mt_slot(drvdata, prev_report + 3, i); |
| 218 | } else { |
| 219 | elan_report_mt_slot(drvdata, data + 1, i); |
| 220 | } |
| 221 | } else { |
| 222 | elan_report_mt_slot(drvdata, NULL, i); |
| 223 | } |
| 224 | } |
| 225 | input_report_key(input, BTN_LEFT, prev_report[2] & 0x01); |
| 226 | } |
| 227 | |
| 228 | input_mt_sync_frame(input); |
| 229 | input_sync(input); |
| 230 | } |
| 231 | |
| 232 | static int elan_raw_event(struct hid_device *hdev, |
| 233 | struct hid_report *report, u8 *data, int size) |
| 234 | { |
| 235 | struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| 236 | |
| 237 | if (is_not_elan_touchpad(hdev)) |
| 238 | return 0; |
| 239 | |
| 240 | if (data[0] == ELAN_SINGLE_FINGER || |
| 241 | data[0] == ELAN_MT_FIRST_FINGER || |
| 242 | data[0] == ELAN_MT_SECOND_FINGER) { |
| 243 | if (size == ELAN_INPUT_REPORT_SIZE) { |
| 244 | elan_report_input(drvdata, data); |
| 245 | return 1; |
| 246 | } |
| 247 | } |
| 248 | |
| 249 | return 0; |
| 250 | } |
| 251 | |
| 252 | static int elan_start_multitouch(struct hid_device *hdev) |
| 253 | { |
| 254 | int ret; |
| 255 | |
| 256 | /* |
| 257 | * This byte sequence will enable multitouch mode and disable |
| 258 | * mouse emulation |
| 259 | */ |
| 260 | const unsigned char buf[] = { 0x0D, 0x00, 0x03, 0x21, 0x00 }; |
| 261 | unsigned char *dmabuf = kmemdup(buf, sizeof(buf), GFP_KERNEL); |
| 262 | |
| 263 | if (!dmabuf) |
| 264 | return -ENOMEM; |
| 265 | |
| 266 | ret = hid_hw_raw_request(hdev, dmabuf[0], dmabuf, sizeof(buf), |
| 267 | HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| 268 | |
| 269 | kfree(dmabuf); |
| 270 | |
| 271 | if (ret != sizeof(buf)) { |
| 272 | hid_err(hdev, "Failed to start multitouch: %d\n", ret); |
| 273 | return ret; |
| 274 | } |
| 275 | |
| 276 | return 0; |
| 277 | } |
| 278 | |
| 279 | static enum led_brightness elan_mute_led_get_brigtness(struct led_classdev *led_cdev) |
| 280 | { |
| 281 | struct device *dev = led_cdev->dev->parent; |
| 282 | struct hid_device *hdev = to_hid_device(dev); |
| 283 | struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| 284 | |
| 285 | return drvdata->mute_led_state; |
| 286 | } |
| 287 | |
| 288 | static int elan_mute_led_set_brigtness(struct led_classdev *led_cdev, |
| 289 | enum led_brightness value) |
| 290 | { |
| 291 | int ret; |
| 292 | u8 led_state; |
| 293 | struct device *dev = led_cdev->dev->parent; |
| 294 | struct hid_device *hdev = to_hid_device(dev); |
| 295 | struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| 296 | |
| 297 | unsigned char *dmabuf = kzalloc(ELAN_LED_REPORT_SIZE, GFP_KERNEL); |
| 298 | |
| 299 | if (!dmabuf) |
| 300 | return -ENOMEM; |
| 301 | |
| 302 | led_state = !!value; |
| 303 | |
| 304 | dmabuf[0] = ELAN_MUTE_LED_REPORT; |
| 305 | dmabuf[1] = 0x02; |
| 306 | dmabuf[2] = led_state; |
| 307 | |
| 308 | ret = hid_hw_raw_request(hdev, dmabuf[0], dmabuf, ELAN_LED_REPORT_SIZE, |
| 309 | HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| 310 | |
| 311 | kfree(dmabuf); |
| 312 | |
| 313 | if (ret != ELAN_LED_REPORT_SIZE) { |
| 314 | hid_err(hdev, "Failed to set mute led brightness: %d\n", ret); |
| 315 | return ret; |
| 316 | } |
| 317 | |
| 318 | drvdata->mute_led_state = led_state; |
| 319 | return 0; |
| 320 | } |
| 321 | |
| 322 | static int elan_init_mute_led(struct hid_device *hdev) |
| 323 | { |
| 324 | struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| 325 | struct led_classdev *mute_led = &drvdata->mute_led; |
| 326 | |
| 327 | mute_led->name = "elan:red:mute"; |
| 328 | mute_led->brightness_get = elan_mute_led_get_brigtness; |
| 329 | mute_led->brightness_set_blocking = elan_mute_led_set_brigtness; |
| 330 | mute_led->max_brightness = LED_ON; |
| 331 | mute_led->dev = &hdev->dev; |
| 332 | |
| 333 | return devm_led_classdev_register(&hdev->dev, mute_led); |
| 334 | } |
| 335 | |
| 336 | static int elan_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| 337 | { |
| 338 | int ret; |
| 339 | struct elan_drvdata *drvdata; |
| 340 | |
| 341 | drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL); |
| 342 | |
| 343 | if (!drvdata) |
| 344 | return -ENOMEM; |
| 345 | |
| 346 | drvdata->settings = (struct elan_touchpad_settings *)id->driver_data; |
| 347 | hid_set_drvdata(hdev, drvdata); |
| 348 | |
| 349 | ret = hid_parse(hdev); |
| 350 | if (ret) { |
| 351 | hid_err(hdev, "Hid Parse failed\n"); |
| 352 | return ret; |
| 353 | } |
| 354 | |
| 355 | ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); |
| 356 | if (ret) { |
| 357 | hid_err(hdev, "Hid hw start failed\n"); |
| 358 | return ret; |
| 359 | } |
| 360 | |
| 361 | if (is_not_elan_touchpad(hdev)) |
| 362 | return 0; |
| 363 | |
| 364 | if (!drvdata->input) { |
| 365 | hid_err(hdev, "Input device is not registred\n"); |
| 366 | ret = -ENAVAIL; |
| 367 | goto err; |
| 368 | } |
| 369 | |
| 370 | ret = elan_start_multitouch(hdev); |
| 371 | if (ret) |
| 372 | goto err; |
| 373 | |
| 374 | ret = elan_init_mute_led(hdev); |
| 375 | if (ret) |
| 376 | goto err; |
| 377 | |
| 378 | return 0; |
| 379 | err: |
| 380 | hid_hw_stop(hdev); |
| 381 | return ret; |
| 382 | } |
| 383 | |
| 384 | static void elan_remove(struct hid_device *hdev) |
| 385 | { |
| 386 | hid_hw_stop(hdev); |
| 387 | } |
| 388 | |
| 389 | static const struct elan_touchpad_settings hp_x2_10_touchpad_data = { |
| 390 | .max_fingers = 5, |
| 391 | .max_x = 2930, |
| 392 | .max_y = 1250, |
| 393 | .max_area_x = 15, |
| 394 | .max_area_y = 15, |
| 395 | .max_w = 255, |
| 396 | .usb_bInterfaceNumber = 1, |
| 397 | }; |
| 398 | |
| 399 | static const struct hid_device_id elan_devices[] = { |
| 400 | { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_HP_X2_10_COVER), |
| 401 | (kernel_ulong_t)&hp_x2_10_touchpad_data}, |
| 402 | { } |
| 403 | }; |
| 404 | |
| 405 | MODULE_DEVICE_TABLE(hid, elan_devices); |
| 406 | |
| 407 | static struct hid_driver elan_driver = { |
| 408 | .name = "elan", |
| 409 | .id_table = elan_devices, |
| 410 | .input_mapping = elan_input_mapping, |
| 411 | .input_configured = elan_input_configured, |
| 412 | .raw_event = elan_raw_event, |
| 413 | .probe = elan_probe, |
| 414 | .remove = elan_remove, |
| 415 | }; |
| 416 | |
| 417 | module_hid_driver(elan_driver); |
| 418 | |
| 419 | MODULE_LICENSE("GPL"); |
| 420 | MODULE_AUTHOR("Alexandrov Stanislav"); |
| 421 | MODULE_DESCRIPTION("Driver for HID ELAN Touchpads"); |