blob: 6880268e8b87b0d7385e73dc95c23aaa8f25bd9a [file] [log] [blame]
Hans de Goede33286862016-04-09 15:22:41 +02001/*
2 * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
Hans de Goede33286862016-04-09 15:22:41 +020049
50/ {
51 model = "Xunlong Orange Pi One";
52 compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
53
54 aliases {
Corentin Labbe25b9c3f2017-05-31 09:18:41 +020055 ethernet0 = &emac;
Hans de Goede33286862016-04-09 15:22:41 +020056 serial0 = &uart0;
57 };
58
59 chosen {
60 stdout-path = "serial0:115200n8";
61 };
62
63 leds {
64 compatible = "gpio-leds";
65 pinctrl-names = "default";
66 pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
67
68 pwr_led {
69 label = "orangepi:green:pwr";
70 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
71 default-state = "on";
72 };
73
74 status_led {
75 label = "orangepi:red:status";
76 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
77 };
78 };
79
80 r_gpio_keys {
81 compatible = "gpio-keys";
82 pinctrl-names = "default";
83 pinctrl-0 = <&sw_r_opc>;
84
85 sw4 {
86 label = "sw4";
87 linux,code = <BTN_0>;
88 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
89 };
90 };
91};
92
Icenowy Zheng2e77b3a2017-03-25 22:50:13 +080093&ehci0 {
94 status = "okay";
95};
96
Hans de Goede33286862016-04-09 15:22:41 +020097&ehci1 {
98 status = "okay";
99};
100
Corentin Labbe25b9c3f2017-05-31 09:18:41 +0200101&emac {
102 phy-handle = <&int_mii_phy>;
103 phy-mode = "mii";
104 allwinner,leds-active-low;
105 status = "okay";
106};
107
Hans de Goede33286862016-04-09 15:22:41 +0200108&mmc0 {
109 pinctrl-names = "default";
110 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
111 vmmc-supply = <&reg_vcc3v3>;
112 bus-width = <4>;
113 cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
114 cd-inverted;
115 status = "okay";
116};
117
Icenowy Zheng2e77b3a2017-03-25 22:50:13 +0800118&ohci0 {
119 status = "okay";
120};
121
Hans de Goede33286862016-04-09 15:22:41 +0200122&ohci1 {
123 status = "okay";
124};
125
126&pio {
127 leds_opc: led_pins@0 {
Maxime Ripard1edcd362016-09-23 14:28:10 +0300128 pins = "PA15";
129 function = "gpio_out";
Hans de Goede33286862016-04-09 15:22:41 +0200130 };
131};
132
133&r_pio {
134 leds_r_opc: led_pins@0 {
Maxime Ripard1edcd362016-09-23 14:28:10 +0300135 pins = "PL10";
136 function = "gpio_out";
Hans de Goede33286862016-04-09 15:22:41 +0200137 };
138
139 sw_r_opc: key_pins@0 {
Maxime Ripard1edcd362016-09-23 14:28:10 +0300140 pins = "PL3";
141 function = "gpio_in";
Hans de Goede33286862016-04-09 15:22:41 +0200142 };
143};
144
Icenowy Zheng2e77b3a2017-03-25 22:50:13 +0800145&reg_usb0_vbus {
146 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
147 status = "okay";
148};
149
Hans de Goede33286862016-04-09 15:22:41 +0200150&uart0 {
151 pinctrl-names = "default";
152 pinctrl-0 = <&uart0_pins_a>;
153 status = "okay";
154};
155
Jorik Jonker33d9fc02016-09-12 20:12:45 +0200156&uart1 {
157 pinctrl-names = "default";
158 pinctrl-0 = <&uart1_pins>;
159 status = "disabled";
160};
161
162&uart2 {
163 pinctrl-names = "default";
164 pinctrl-0 = <&uart2_pins>;
165 status = "disabled";
166};
167
168&uart3 {
169 pinctrl-names = "default";
170 pinctrl-0 = <&uart3_pins>;
171 status = "disabled";
172};
173
Icenowy Zheng2e77b3a2017-03-25 22:50:13 +0800174&usb_otg {
175 dr_mode = "otg";
176 status = "okay";
177};
178
Hans de Goede33286862016-04-09 15:22:41 +0200179&usbphy {
Icenowy Zheng2e77b3a2017-03-25 22:50:13 +0800180 /* USB Type-A port's VBUS is always on */
181 usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
182 usb0_vbus-supply = <&reg_usb0_vbus>;
Hans de Goede33286862016-04-09 15:22:41 +0200183 status = "okay";
184};