Rafał Miłecki | e566628 | 2016-08-12 00:28:03 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Broadcom Northstar USB 3.0 PHY Driver |
| 3 | * |
| 4 | * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> |
| 5 | * |
| 6 | * All magic values used for initialization (and related comments) were obtained |
| 7 | * from Broadcom's SDK: |
| 8 | * Copyright (c) Broadcom Corp, 2012 |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License version 2 as |
| 12 | * published by the Free Software Foundation. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/bcma/bcma.h> |
| 16 | #include <linux/delay.h> |
| 17 | #include <linux/err.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/of_platform.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/phy/phy.h> |
| 22 | #include <linux/slab.h> |
| 23 | |
| 24 | #define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */ |
| 25 | |
| 26 | enum bcm_ns_family { |
| 27 | BCM_NS_UNKNOWN, |
| 28 | BCM_NS_AX, |
| 29 | BCM_NS_BX, |
| 30 | }; |
| 31 | |
| 32 | struct bcm_ns_usb3 { |
| 33 | struct device *dev; |
| 34 | enum bcm_ns_family family; |
| 35 | void __iomem *dmp; |
| 36 | void __iomem *ccb_mii; |
| 37 | struct phy *phy; |
| 38 | }; |
| 39 | |
| 40 | static const struct of_device_id bcm_ns_usb3_id_table[] = { |
| 41 | { |
| 42 | .compatible = "brcm,ns-ax-usb3-phy", |
| 43 | .data = (int *)BCM_NS_AX, |
| 44 | }, |
| 45 | { |
| 46 | .compatible = "brcm,ns-bx-usb3-phy", |
| 47 | .data = (int *)BCM_NS_BX, |
| 48 | }, |
| 49 | {}, |
| 50 | }; |
| 51 | MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); |
| 52 | |
| 53 | static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr, |
| 54 | u32 mask, u32 value, unsigned long timeout) |
| 55 | { |
| 56 | unsigned long deadline = jiffies + timeout; |
| 57 | u32 val; |
| 58 | |
| 59 | do { |
| 60 | val = readl(addr); |
| 61 | if ((val & mask) == value) |
| 62 | return 0; |
| 63 | cpu_relax(); |
| 64 | udelay(10); |
| 65 | } while (!time_after_eq(jiffies, deadline)); |
| 66 | |
| 67 | dev_err(usb3->dev, "Timeout waiting for register %p\n", addr); |
| 68 | |
| 69 | return -EBUSY; |
| 70 | } |
| 71 | |
| 72 | static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3) |
| 73 | { |
| 74 | return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL, |
| 75 | 0x0100, 0x0000, |
| 76 | usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US)); |
| 77 | } |
| 78 | |
| 79 | static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value) |
| 80 | { |
| 81 | int err; |
| 82 | |
| 83 | err = bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| 84 | if (err < 0) { |
| 85 | dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value); |
| 86 | return err; |
| 87 | } |
| 88 | |
| 89 | writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA); |
| 90 | |
| 91 | return 0; |
| 92 | } |
| 93 | |
| 94 | static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) |
| 95 | { |
| 96 | int err; |
| 97 | |
| 98 | /* Enable MDIO. Setting MDCDIV as 26 */ |
| 99 | writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); |
| 100 | |
| 101 | /* Wait for MDIO? */ |
| 102 | udelay(2); |
| 103 | |
| 104 | /* USB3 PLL Block */ |
| 105 | err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); |
| 106 | if (err < 0) |
| 107 | return err; |
| 108 | |
| 109 | /* Assert Ana_Pllseq start */ |
| 110 | bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000); |
| 111 | |
| 112 | /* Assert CML Divider ratio to 26 */ |
| 113 | bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); |
| 114 | |
| 115 | /* Asserting PLL Reset */ |
| 116 | bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000); |
| 117 | |
| 118 | /* Deaaserting PLL Reset */ |
| 119 | bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000); |
| 120 | |
| 121 | /* Waiting MII Mgt interface idle */ |
| 122 | bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| 123 | |
| 124 | /* Deasserting USB3 system reset */ |
| 125 | writel(0, usb3->dmp + BCMA_RESET_CTL); |
| 126 | |
| 127 | /* PLL frequency monitor enable */ |
| 128 | bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000); |
| 129 | |
| 130 | /* PIPE Block */ |
| 131 | bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060); |
| 132 | |
| 133 | /* CMPMAX & CMPMINTH setting */ |
| 134 | bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d); |
| 135 | |
| 136 | /* DEGLITCH MIN & MAX setting */ |
| 137 | bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302); |
| 138 | |
| 139 | /* TXPMD block */ |
| 140 | bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); |
| 141 | |
| 142 | /* Enabling SSC */ |
| 143 | bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); |
| 144 | |
| 145 | /* Waiting MII Mgt interface idle */ |
| 146 | bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| 147 | |
| 148 | return 0; |
| 149 | } |
| 150 | |
| 151 | static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) |
| 152 | { |
| 153 | int err; |
| 154 | |
| 155 | /* Enable MDIO. Setting MDCDIV as 26 */ |
| 156 | writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); |
| 157 | |
| 158 | /* Wait for MDIO? */ |
| 159 | udelay(2); |
| 160 | |
| 161 | /* PLL30 block */ |
| 162 | err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); |
| 163 | if (err < 0) |
| 164 | return err; |
| 165 | |
| 166 | bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); |
| 167 | |
| 168 | bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0); |
| 169 | |
| 170 | bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c); |
| 171 | |
| 172 | /* Enable SSC */ |
| 173 | bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); |
| 174 | |
| 175 | bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3); |
| 176 | |
| 177 | bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); |
| 178 | |
| 179 | /* Waiting MII Mgt interface idle */ |
| 180 | bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| 181 | |
| 182 | /* Deasserting USB3 system reset */ |
| 183 | writel(0, usb3->dmp + BCMA_RESET_CTL); |
| 184 | |
| 185 | return 0; |
| 186 | } |
| 187 | |
| 188 | static int bcm_ns_usb3_phy_init(struct phy *phy) |
| 189 | { |
| 190 | struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); |
| 191 | int err; |
| 192 | |
| 193 | /* Perform USB3 system soft reset */ |
| 194 | writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); |
| 195 | |
| 196 | switch (usb3->family) { |
| 197 | case BCM_NS_AX: |
| 198 | err = bcm_ns_usb3_phy_init_ns_ax(usb3); |
| 199 | break; |
| 200 | case BCM_NS_BX: |
| 201 | err = bcm_ns_usb3_phy_init_ns_bx(usb3); |
| 202 | break; |
| 203 | default: |
| 204 | WARN_ON(1); |
| 205 | err = -ENOTSUPP; |
| 206 | } |
| 207 | |
| 208 | return err; |
| 209 | } |
| 210 | |
| 211 | static const struct phy_ops ops = { |
| 212 | .init = bcm_ns_usb3_phy_init, |
| 213 | .owner = THIS_MODULE, |
| 214 | }; |
| 215 | |
| 216 | static int bcm_ns_usb3_probe(struct platform_device *pdev) |
| 217 | { |
| 218 | struct device *dev = &pdev->dev; |
| 219 | const struct of_device_id *of_id; |
| 220 | struct bcm_ns_usb3 *usb3; |
| 221 | struct resource *res; |
| 222 | struct phy_provider *phy_provider; |
| 223 | |
| 224 | usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); |
| 225 | if (!usb3) |
| 226 | return -ENOMEM; |
| 227 | |
| 228 | usb3->dev = dev; |
| 229 | |
| 230 | of_id = of_match_device(bcm_ns_usb3_id_table, dev); |
| 231 | if (!of_id) |
| 232 | return -EINVAL; |
| 233 | usb3->family = (enum bcm_ns_family)of_id->data; |
| 234 | |
| 235 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp"); |
| 236 | usb3->dmp = devm_ioremap_resource(dev, res); |
| 237 | if (IS_ERR(usb3->dmp)) { |
| 238 | dev_err(dev, "Failed to map DMP regs\n"); |
| 239 | return PTR_ERR(usb3->dmp); |
| 240 | } |
| 241 | |
| 242 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii"); |
| 243 | usb3->ccb_mii = devm_ioremap_resource(dev, res); |
| 244 | if (IS_ERR(usb3->ccb_mii)) { |
| 245 | dev_err(dev, "Failed to map ChipCommon B MII regs\n"); |
| 246 | return PTR_ERR(usb3->ccb_mii); |
| 247 | } |
| 248 | |
| 249 | usb3->phy = devm_phy_create(dev, NULL, &ops); |
| 250 | if (IS_ERR(usb3->phy)) { |
| 251 | dev_err(dev, "Failed to create PHY\n"); |
| 252 | return PTR_ERR(usb3->phy); |
| 253 | } |
| 254 | |
| 255 | phy_set_drvdata(usb3->phy, usb3); |
| 256 | platform_set_drvdata(pdev, usb3); |
| 257 | |
| 258 | phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| 259 | if (!IS_ERR(phy_provider)) |
| 260 | dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n"); |
| 261 | |
| 262 | return PTR_ERR_OR_ZERO(phy_provider); |
| 263 | } |
| 264 | |
| 265 | static struct platform_driver bcm_ns_usb3_driver = { |
| 266 | .probe = bcm_ns_usb3_probe, |
| 267 | .driver = { |
| 268 | .name = "bcm_ns_usb3", |
| 269 | .of_match_table = bcm_ns_usb3_id_table, |
| 270 | }, |
| 271 | }; |
| 272 | module_platform_driver(bcm_ns_usb3_driver); |
| 273 | |
| 274 | MODULE_LICENSE("GPL v2"); |