Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /*****************************************************************************/ |
| 2 | |
| 3 | /* |
| 4 | * yam.c -- YAM radio modem driver. |
| 5 | * |
| 6 | * Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr) |
| 7 | * Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch) |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License, or |
| 12 | * (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 22 | * |
| 23 | * Please note that the GPL allows you to use the driver, NOT the radio. |
| 24 | * In order to use the radio, you need a license from the communications |
| 25 | * authority of your country. |
| 26 | * |
| 27 | * |
| 28 | * History: |
| 29 | * 0.0 F1OAT 06.06.98 Begin of work with baycom.c source code V 0.3 |
| 30 | * 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration |
| 31 | * 0.2 F6FBB 08.06.98 Added delay after FPGA programming |
| 32 | * 0.3 F6FBB 29.07.98 Delayed PTT implementation for dupmode=2 |
| 33 | * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistance |
| 34 | * 0.5 F6FBB 01.08.98 Shared IRQs, /proc/net and network statistics |
| 35 | * 0.6 F6FBB 25.08.98 Added 1200Bds format |
| 36 | * 0.7 F6FBB 12.09.98 Added to the kernel configuration |
| 37 | * 0.8 F6FBB 14.10.98 Fixed slottime/persistence timing bug |
| 38 | * OK1ZIA 2.09.01 Fixed "kfree_skb on hard IRQ" |
| 39 | * using dev_kfree_skb_any(). (important in 2.4 kernel) |
| 40 | * |
| 41 | */ |
| 42 | |
| 43 | /*****************************************************************************/ |
| 44 | |
| 45 | #include <linux/config.h> |
| 46 | #include <linux/module.h> |
| 47 | #include <linux/types.h> |
| 48 | #include <linux/net.h> |
| 49 | #include <linux/in.h> |
| 50 | #include <linux/if.h> |
| 51 | #include <linux/slab.h> |
| 52 | #include <linux/errno.h> |
| 53 | #include <linux/bitops.h> |
| 54 | #include <asm/io.h> |
| 55 | #include <asm/system.h> |
| 56 | #include <linux/interrupt.h> |
| 57 | #include <linux/ioport.h> |
| 58 | |
| 59 | #include <linux/netdevice.h> |
| 60 | #include <linux/if_arp.h> |
| 61 | #include <linux/etherdevice.h> |
| 62 | #include <linux/skbuff.h> |
| 63 | #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) |
| 64 | /* prototypes for ax25_encapsulate and ax25_rebuild_header */ |
| 65 | #include <net/ax25.h> |
| 66 | #endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */ |
| 67 | |
| 68 | /* make genksyms happy */ |
| 69 | #include <linux/ip.h> |
| 70 | #include <linux/udp.h> |
| 71 | #include <linux/tcp.h> |
| 72 | |
| 73 | #include <linux/kernel.h> |
| 74 | #include <linux/proc_fs.h> |
| 75 | #include <linux/seq_file.h> |
| 76 | |
| 77 | #include <asm/uaccess.h> |
| 78 | #include <linux/init.h> |
| 79 | |
| 80 | #include <linux/yam.h> |
| 81 | #include "yam9600.h" |
| 82 | #include "yam1200.h" |
| 83 | |
| 84 | /* --------------------------------------------------------------------- */ |
| 85 | |
| 86 | static const char yam_drvname[] = "yam"; |
| 87 | static char yam_drvinfo[] __initdata = KERN_INFO "YAM driver version 0.8 by F1OAT/F6FBB\n"; |
| 88 | |
| 89 | /* --------------------------------------------------------------------- */ |
| 90 | |
| 91 | #define YAM_9600 1 |
| 92 | #define YAM_1200 2 |
| 93 | |
| 94 | #define NR_PORTS 4 |
| 95 | #define YAM_MAGIC 0xF10A7654 |
| 96 | |
| 97 | /* Transmitter states */ |
| 98 | |
| 99 | #define TX_OFF 0 |
| 100 | #define TX_HEAD 1 |
| 101 | #define TX_DATA 2 |
| 102 | #define TX_CRC1 3 |
| 103 | #define TX_CRC2 4 |
| 104 | #define TX_TAIL 5 |
| 105 | |
| 106 | #define YAM_MAX_FRAME 1024 |
| 107 | |
| 108 | #define DEFAULT_BITRATE 9600 /* bps */ |
| 109 | #define DEFAULT_HOLDD 10 /* sec */ |
| 110 | #define DEFAULT_TXD 300 /* ms */ |
| 111 | #define DEFAULT_TXTAIL 10 /* ms */ |
| 112 | #define DEFAULT_SLOT 100 /* ms */ |
| 113 | #define DEFAULT_PERS 64 /* 0->255 */ |
| 114 | |
| 115 | struct yam_port { |
| 116 | int magic; |
| 117 | int bitrate; |
| 118 | int baudrate; |
| 119 | int iobase; |
| 120 | int irq; |
| 121 | int dupmode; |
| 122 | |
| 123 | struct net_device *dev; |
| 124 | |
| 125 | /* Stats section */ |
| 126 | |
| 127 | struct net_device_stats stats; |
| 128 | |
| 129 | int nb_rxint; |
| 130 | int nb_mdint; |
| 131 | |
| 132 | /* Parameters section */ |
| 133 | |
| 134 | int txd; /* tx delay */ |
| 135 | int holdd; /* duplex ptt delay */ |
| 136 | int txtail; /* txtail delay */ |
| 137 | int slot; /* slottime */ |
| 138 | int pers; /* persistence */ |
| 139 | |
| 140 | /* Tx section */ |
| 141 | |
| 142 | int tx_state; |
| 143 | int tx_count; |
| 144 | int slotcnt; |
| 145 | unsigned char tx_buf[YAM_MAX_FRAME]; |
| 146 | int tx_len; |
| 147 | int tx_crcl, tx_crch; |
| 148 | struct sk_buff_head send_queue; /* Packets awaiting transmission */ |
| 149 | |
| 150 | /* Rx section */ |
| 151 | |
| 152 | int dcd; |
| 153 | unsigned char rx_buf[YAM_MAX_FRAME]; |
| 154 | int rx_len; |
| 155 | int rx_crcl, rx_crch; |
| 156 | }; |
| 157 | |
| 158 | struct yam_mcs { |
| 159 | unsigned char bits[YAM_FPGA_SIZE]; |
| 160 | int bitrate; |
| 161 | struct yam_mcs *next; |
| 162 | }; |
| 163 | |
| 164 | static struct net_device *yam_devs[NR_PORTS]; |
| 165 | |
| 166 | static struct yam_mcs *yam_data; |
| 167 | |
| 168 | static char ax25_bcast[7] = |
| 169 | {'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1}; |
| 170 | static char ax25_test[7] = |
| 171 | {'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1}; |
| 172 | |
| 173 | static struct timer_list yam_timer = TIMER_INITIALIZER(NULL, 0, 0); |
| 174 | |
| 175 | /* --------------------------------------------------------------------- */ |
| 176 | |
| 177 | #define RBR(iobase) (iobase+0) |
| 178 | #define THR(iobase) (iobase+0) |
| 179 | #define IER(iobase) (iobase+1) |
| 180 | #define IIR(iobase) (iobase+2) |
| 181 | #define FCR(iobase) (iobase+2) |
| 182 | #define LCR(iobase) (iobase+3) |
| 183 | #define MCR(iobase) (iobase+4) |
| 184 | #define LSR(iobase) (iobase+5) |
| 185 | #define MSR(iobase) (iobase+6) |
| 186 | #define SCR(iobase) (iobase+7) |
| 187 | #define DLL(iobase) (iobase+0) |
| 188 | #define DLM(iobase) (iobase+1) |
| 189 | |
| 190 | #define YAM_EXTENT 8 |
| 191 | |
| 192 | /* Interrupt Identification Register Bit Masks */ |
| 193 | #define IIR_NOPEND 1 |
| 194 | #define IIR_MSR 0 |
| 195 | #define IIR_TX 2 |
| 196 | #define IIR_RX 4 |
| 197 | #define IIR_LSR 6 |
| 198 | #define IIR_TIMEOUT 12 /* Fifo mode only */ |
| 199 | |
| 200 | #define IIR_MASK 0x0F |
| 201 | |
| 202 | /* Interrupt Enable Register Bit Masks */ |
| 203 | #define IER_RX 1 /* enable rx interrupt */ |
| 204 | #define IER_TX 2 /* enable tx interrupt */ |
| 205 | #define IER_LSR 4 /* enable line status interrupts */ |
| 206 | #define IER_MSR 8 /* enable modem status interrupts */ |
| 207 | |
| 208 | /* Modem Control Register Bit Masks */ |
| 209 | #define MCR_DTR 0x01 /* DTR output */ |
| 210 | #define MCR_RTS 0x02 /* RTS output */ |
| 211 | #define MCR_OUT1 0x04 /* OUT1 output (not accessible in RS232) */ |
| 212 | #define MCR_OUT2 0x08 /* Master Interrupt enable (must be set on PCs) */ |
| 213 | #define MCR_LOOP 0x10 /* Loopback enable */ |
| 214 | |
| 215 | /* Modem Status Register Bit Masks */ |
| 216 | #define MSR_DCTS 0x01 /* Delta CTS input */ |
| 217 | #define MSR_DDSR 0x02 /* Delta DSR */ |
| 218 | #define MSR_DRIN 0x04 /* Delta RI */ |
| 219 | #define MSR_DDCD 0x08 /* Delta DCD */ |
| 220 | #define MSR_CTS 0x10 /* CTS input */ |
| 221 | #define MSR_DSR 0x20 /* DSR input */ |
| 222 | #define MSR_RING 0x40 /* RI input */ |
| 223 | #define MSR_DCD 0x80 /* DCD input */ |
| 224 | |
| 225 | /* line status register bit mask */ |
| 226 | #define LSR_RXC 0x01 |
| 227 | #define LSR_OE 0x02 |
| 228 | #define LSR_PE 0x04 |
| 229 | #define LSR_FE 0x08 |
| 230 | #define LSR_BREAK 0x10 |
| 231 | #define LSR_THRE 0x20 |
| 232 | #define LSR_TSRE 0x40 |
| 233 | |
| 234 | /* Line Control Register Bit Masks */ |
| 235 | #define LCR_DLAB 0x80 |
| 236 | #define LCR_BREAK 0x40 |
| 237 | #define LCR_PZERO 0x28 |
| 238 | #define LCR_PEVEN 0x18 |
| 239 | #define LCR_PODD 0x08 |
| 240 | #define LCR_STOP1 0x00 |
| 241 | #define LCR_STOP2 0x04 |
| 242 | #define LCR_BIT5 0x00 |
| 243 | #define LCR_BIT6 0x02 |
| 244 | #define LCR_BIT7 0x01 |
| 245 | #define LCR_BIT8 0x03 |
| 246 | |
| 247 | /* YAM Modem <-> UART Port mapping */ |
| 248 | |
| 249 | #define TX_RDY MSR_DCTS /* transmitter ready to send */ |
| 250 | #define RX_DCD MSR_DCD /* carrier detect */ |
| 251 | #define RX_FLAG MSR_RING /* hdlc flag received */ |
| 252 | #define FPGA_DONE MSR_DSR /* FPGA is configured */ |
| 253 | #define PTT_ON (MCR_RTS|MCR_OUT2) /* activate PTT */ |
| 254 | #define PTT_OFF (MCR_DTR|MCR_OUT2) /* release PTT */ |
| 255 | |
| 256 | #define ENABLE_RXINT IER_RX /* enable uart rx interrupt during rx */ |
| 257 | #define ENABLE_TXINT IER_MSR /* enable uart ms interrupt during tx */ |
| 258 | #define ENABLE_RTXINT (IER_RX|IER_MSR) /* full duplex operations */ |
| 259 | |
| 260 | |
| 261 | /************************************************************************* |
| 262 | * CRC Tables |
| 263 | ************************************************************************/ |
| 264 | |
| 265 | static const unsigned char chktabl[256] = |
| 266 | {0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e, |
| 267 | 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64, |
| 268 | 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e, |
| 269 | 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50, |
| 270 | 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e, |
| 271 | 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44, |
| 272 | 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e, |
| 273 | 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38, |
| 274 | 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e, |
| 275 | 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24, |
| 276 | 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e, |
| 277 | 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10, |
| 278 | 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e, |
| 279 | 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04, |
| 280 | 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e, |
| 281 | 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9, |
| 282 | 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1, |
| 283 | 0x78}; |
| 284 | static const unsigned char chktabh[256] = |
| 285 | {0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9, |
| 286 | 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb, |
| 287 | 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb, |
| 288 | 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f, |
| 289 | 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed, |
| 290 | 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf, |
| 291 | 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef, |
| 292 | 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07, |
| 293 | 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1, |
| 294 | 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3, |
| 295 | 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3, |
| 296 | 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87, |
| 297 | 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5, |
| 298 | 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7, |
| 299 | 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7, |
| 300 | 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f, |
| 301 | 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e, |
| 302 | 0x0f}; |
| 303 | |
| 304 | /************************************************************************* |
| 305 | * FPGA functions |
| 306 | ************************************************************************/ |
| 307 | |
| 308 | static void delay(int ms) |
| 309 | { |
| 310 | unsigned long timeout = jiffies + ((ms * HZ) / 1000); |
| 311 | while (time_before(jiffies, timeout)) |
| 312 | cpu_relax(); |
| 313 | } |
| 314 | |
| 315 | /* |
| 316 | * reset FPGA |
| 317 | */ |
| 318 | |
| 319 | static void fpga_reset(int iobase) |
| 320 | { |
| 321 | outb(0, IER(iobase)); |
| 322 | outb(LCR_DLAB | LCR_BIT5, LCR(iobase)); |
| 323 | outb(1, DLL(iobase)); |
| 324 | outb(0, DLM(iobase)); |
| 325 | |
| 326 | outb(LCR_BIT5, LCR(iobase)); |
| 327 | inb(LSR(iobase)); |
| 328 | inb(MSR(iobase)); |
| 329 | /* turn off FPGA supply voltage */ |
| 330 | outb(MCR_OUT1 | MCR_OUT2, MCR(iobase)); |
| 331 | delay(100); |
| 332 | /* turn on FPGA supply voltage again */ |
| 333 | outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase)); |
| 334 | delay(100); |
| 335 | } |
| 336 | |
| 337 | /* |
| 338 | * send one byte to FPGA |
| 339 | */ |
| 340 | |
| 341 | static int fpga_write(int iobase, unsigned char wrd) |
| 342 | { |
| 343 | unsigned char bit; |
| 344 | int k; |
| 345 | unsigned long timeout = jiffies + HZ / 10; |
| 346 | |
| 347 | for (k = 0; k < 8; k++) { |
| 348 | bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR; |
| 349 | outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase)); |
| 350 | wrd <<= 1; |
| 351 | outb(0xfc, THR(iobase)); |
| 352 | while ((inb(LSR(iobase)) & LSR_TSRE) == 0) |
| 353 | if (time_after(jiffies, timeout)) |
| 354 | return -1; |
| 355 | } |
| 356 | |
| 357 | return 0; |
| 358 | } |
| 359 | |
| 360 | static unsigned char *add_mcs(unsigned char *bits, int bitrate) |
| 361 | { |
| 362 | struct yam_mcs *p; |
| 363 | |
| 364 | /* If it already exists, replace the bit data */ |
| 365 | p = yam_data; |
| 366 | while (p) { |
| 367 | if (p->bitrate == bitrate) { |
| 368 | memcpy(p->bits, bits, YAM_FPGA_SIZE); |
| 369 | return p->bits; |
| 370 | } |
| 371 | p = p->next; |
| 372 | } |
| 373 | |
| 374 | /* Allocate a new mcs */ |
| 375 | if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) { |
| 376 | printk(KERN_WARNING "YAM: no memory to allocate mcs\n"); |
| 377 | return NULL; |
| 378 | } |
| 379 | memcpy(p->bits, bits, YAM_FPGA_SIZE); |
| 380 | p->bitrate = bitrate; |
| 381 | p->next = yam_data; |
| 382 | yam_data = p; |
| 383 | |
| 384 | return p->bits; |
| 385 | } |
| 386 | |
| 387 | static unsigned char *get_mcs(int bitrate) |
| 388 | { |
| 389 | struct yam_mcs *p; |
| 390 | |
| 391 | p = yam_data; |
| 392 | while (p) { |
| 393 | if (p->bitrate == bitrate) |
| 394 | return p->bits; |
| 395 | p = p->next; |
| 396 | } |
| 397 | |
| 398 | /* Load predefined mcs data */ |
| 399 | switch (bitrate) { |
| 400 | case 1200: |
| 401 | return add_mcs(bits_1200, bitrate); |
| 402 | default: |
| 403 | return add_mcs(bits_9600, bitrate); |
| 404 | } |
| 405 | } |
| 406 | |
| 407 | /* |
| 408 | * download bitstream to FPGA |
| 409 | * data is contained in bits[] array in yam1200.h resp. yam9600.h |
| 410 | */ |
| 411 | |
| 412 | static int fpga_download(int iobase, int bitrate) |
| 413 | { |
| 414 | int i, rc; |
| 415 | unsigned char *pbits; |
| 416 | |
| 417 | pbits = get_mcs(bitrate); |
| 418 | if (pbits == NULL) |
| 419 | return -1; |
| 420 | |
| 421 | fpga_reset(iobase); |
| 422 | for (i = 0; i < YAM_FPGA_SIZE; i++) { |
| 423 | if (fpga_write(iobase, pbits[i])) { |
| 424 | printk(KERN_ERR "yam: error in write cycle\n"); |
| 425 | return -1; /* write... */ |
| 426 | } |
| 427 | } |
| 428 | |
| 429 | fpga_write(iobase, 0xFF); |
| 430 | rc = inb(MSR(iobase)); /* check DONE signal */ |
| 431 | |
| 432 | /* Needed for some hardwares */ |
| 433 | delay(50); |
| 434 | |
| 435 | return (rc & MSR_DSR) ? 0 : -1; |
| 436 | } |
| 437 | |
| 438 | |
| 439 | /************************************************************************ |
| 440 | * Serial port init |
| 441 | ************************************************************************/ |
| 442 | |
| 443 | static void yam_set_uart(struct net_device *dev) |
| 444 | { |
| 445 | struct yam_port *yp = netdev_priv(dev); |
| 446 | int divisor = 115200 / yp->baudrate; |
| 447 | |
| 448 | outb(0, IER(dev->base_addr)); |
| 449 | outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr)); |
| 450 | outb(divisor, DLL(dev->base_addr)); |
| 451 | outb(0, DLM(dev->base_addr)); |
| 452 | outb(LCR_BIT8, LCR(dev->base_addr)); |
| 453 | outb(PTT_OFF, MCR(dev->base_addr)); |
| 454 | outb(0x00, FCR(dev->base_addr)); |
| 455 | |
| 456 | /* Flush pending irq */ |
| 457 | |
| 458 | inb(RBR(dev->base_addr)); |
| 459 | inb(MSR(dev->base_addr)); |
| 460 | |
| 461 | /* Enable rx irq */ |
| 462 | |
| 463 | outb(ENABLE_RTXINT, IER(dev->base_addr)); |
| 464 | } |
| 465 | |
| 466 | |
| 467 | /* --------------------------------------------------------------------- */ |
| 468 | |
| 469 | enum uart { |
| 470 | c_uart_unknown, c_uart_8250, |
| 471 | c_uart_16450, c_uart_16550, c_uart_16550A |
| 472 | }; |
| 473 | |
| 474 | static const char *uart_str[] = |
| 475 | {"unknown", "8250", "16450", "16550", "16550A"}; |
| 476 | |
| 477 | static enum uart yam_check_uart(unsigned int iobase) |
| 478 | { |
| 479 | unsigned char b1, b2, b3; |
| 480 | enum uart u; |
| 481 | enum uart uart_tab[] = |
| 482 | {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A}; |
| 483 | |
| 484 | b1 = inb(MCR(iobase)); |
| 485 | outb(b1 | 0x10, MCR(iobase)); /* loopback mode */ |
| 486 | b2 = inb(MSR(iobase)); |
| 487 | outb(0x1a, MCR(iobase)); |
| 488 | b3 = inb(MSR(iobase)) & 0xf0; |
| 489 | outb(b1, MCR(iobase)); /* restore old values */ |
| 490 | outb(b2, MSR(iobase)); |
| 491 | if (b3 != 0x90) |
| 492 | return c_uart_unknown; |
| 493 | inb(RBR(iobase)); |
| 494 | inb(RBR(iobase)); |
| 495 | outb(0x01, FCR(iobase)); /* enable FIFOs */ |
| 496 | u = uart_tab[(inb(IIR(iobase)) >> 6) & 3]; |
| 497 | if (u == c_uart_16450) { |
| 498 | outb(0x5a, SCR(iobase)); |
| 499 | b1 = inb(SCR(iobase)); |
| 500 | outb(0xa5, SCR(iobase)); |
| 501 | b2 = inb(SCR(iobase)); |
| 502 | if ((b1 != 0x5a) || (b2 != 0xa5)) |
| 503 | u = c_uart_8250; |
| 504 | } |
| 505 | return u; |
| 506 | } |
| 507 | |
| 508 | /****************************************************************************** |
| 509 | * Rx Section |
| 510 | ******************************************************************************/ |
| 511 | static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp) |
| 512 | { |
| 513 | if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) { |
| 514 | int pkt_len = yp->rx_len - 2 + 1; /* -CRC + kiss */ |
| 515 | struct sk_buff *skb; |
| 516 | |
| 517 | if ((yp->rx_crch & yp->rx_crcl) != 0xFF) { |
| 518 | /* Bad crc */ |
| 519 | } else { |
| 520 | if (!(skb = dev_alloc_skb(pkt_len))) { |
| 521 | printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name); |
| 522 | ++yp->stats.rx_dropped; |
| 523 | } else { |
| 524 | unsigned char *cp; |
| 525 | skb->dev = dev; |
| 526 | cp = skb_put(skb, pkt_len); |
| 527 | *cp++ = 0; /* KISS kludge */ |
| 528 | memcpy(cp, yp->rx_buf, pkt_len - 1); |
| 529 | skb->protocol = htons(ETH_P_AX25); |
| 530 | skb->mac.raw = skb->data; |
| 531 | netif_rx(skb); |
| 532 | dev->last_rx = jiffies; |
| 533 | ++yp->stats.rx_packets; |
| 534 | } |
| 535 | } |
| 536 | } |
| 537 | yp->rx_len = 0; |
| 538 | yp->rx_crcl = 0x21; |
| 539 | yp->rx_crch = 0xf3; |
| 540 | } |
| 541 | |
| 542 | static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb) |
| 543 | { |
| 544 | if (yp->rx_len < YAM_MAX_FRAME) { |
| 545 | unsigned char c = yp->rx_crcl; |
| 546 | yp->rx_crcl = (chktabl[c] ^ yp->rx_crch); |
| 547 | yp->rx_crch = (chktabh[c] ^ rxb); |
| 548 | yp->rx_buf[yp->rx_len++] = rxb; |
| 549 | } |
| 550 | } |
| 551 | |
| 552 | /******************************************************************************** |
| 553 | * TX Section |
| 554 | ********************************************************************************/ |
| 555 | |
| 556 | static void ptt_on(struct net_device *dev) |
| 557 | { |
| 558 | outb(PTT_ON, MCR(dev->base_addr)); |
| 559 | } |
| 560 | |
| 561 | static void ptt_off(struct net_device *dev) |
| 562 | { |
| 563 | outb(PTT_OFF, MCR(dev->base_addr)); |
| 564 | } |
| 565 | |
| 566 | static int yam_send_packet(struct sk_buff *skb, struct net_device *dev) |
| 567 | { |
| 568 | struct yam_port *yp = netdev_priv(dev); |
| 569 | |
| 570 | skb_queue_tail(&yp->send_queue, skb); |
| 571 | dev->trans_start = jiffies; |
| 572 | return 0; |
| 573 | } |
| 574 | |
| 575 | static void yam_start_tx(struct net_device *dev, struct yam_port *yp) |
| 576 | { |
| 577 | if ((yp->tx_state == TX_TAIL) || (yp->txd == 0)) |
| 578 | yp->tx_count = 1; |
| 579 | else |
| 580 | yp->tx_count = (yp->bitrate * yp->txd) / 8000; |
| 581 | yp->tx_state = TX_HEAD; |
| 582 | ptt_on(dev); |
| 583 | } |
| 584 | |
| 585 | static unsigned short random_seed; |
| 586 | |
| 587 | static inline unsigned short random_num(void) |
| 588 | { |
| 589 | random_seed = 28629 * random_seed + 157; |
| 590 | return random_seed; |
| 591 | } |
| 592 | |
| 593 | static void yam_arbitrate(struct net_device *dev) |
| 594 | { |
| 595 | struct yam_port *yp = netdev_priv(dev); |
| 596 | |
| 597 | if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF || |
| 598 | skb_queue_empty(&yp->send_queue)) |
| 599 | return; |
| 600 | /* tx_state is TX_OFF and there is data to send */ |
| 601 | |
| 602 | if (yp->dupmode) { |
| 603 | /* Full duplex mode, don't wait */ |
| 604 | yam_start_tx(dev, yp); |
| 605 | return; |
| 606 | } |
| 607 | if (yp->dcd) { |
| 608 | /* DCD on, wait slotime ... */ |
| 609 | yp->slotcnt = yp->slot / 10; |
| 610 | return; |
| 611 | } |
| 612 | /* Is slottime passed ? */ |
| 613 | if ((--yp->slotcnt) > 0) |
| 614 | return; |
| 615 | |
| 616 | yp->slotcnt = yp->slot / 10; |
| 617 | |
| 618 | /* is random > persist ? */ |
| 619 | if ((random_num() % 256) > yp->pers) |
| 620 | return; |
| 621 | |
| 622 | yam_start_tx(dev, yp); |
| 623 | } |
| 624 | |
| 625 | static void yam_dotimer(unsigned long dummy) |
| 626 | { |
| 627 | int i; |
| 628 | |
| 629 | for (i = 0; i < NR_PORTS; i++) { |
| 630 | struct net_device *dev = yam_devs[i]; |
| 631 | if (dev && netif_running(dev)) |
| 632 | yam_arbitrate(dev); |
| 633 | } |
| 634 | yam_timer.expires = jiffies + HZ / 100; |
| 635 | add_timer(&yam_timer); |
| 636 | } |
| 637 | |
| 638 | static void yam_tx_byte(struct net_device *dev, struct yam_port *yp) |
| 639 | { |
| 640 | struct sk_buff *skb; |
| 641 | unsigned char b, temp; |
| 642 | |
| 643 | switch (yp->tx_state) { |
| 644 | case TX_OFF: |
| 645 | break; |
| 646 | case TX_HEAD: |
| 647 | if (--yp->tx_count <= 0) { |
| 648 | if (!(skb = skb_dequeue(&yp->send_queue))) { |
| 649 | ptt_off(dev); |
| 650 | yp->tx_state = TX_OFF; |
| 651 | break; |
| 652 | } |
| 653 | yp->tx_state = TX_DATA; |
| 654 | if (skb->data[0] != 0) { |
| 655 | /* do_kiss_params(s, skb->data, skb->len); */ |
| 656 | dev_kfree_skb_any(skb); |
| 657 | break; |
| 658 | } |
| 659 | yp->tx_len = skb->len - 1; /* strip KISS byte */ |
| 660 | if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) { |
| 661 | dev_kfree_skb_any(skb); |
| 662 | break; |
| 663 | } |
| 664 | memcpy(yp->tx_buf, skb->data + 1, yp->tx_len); |
| 665 | dev_kfree_skb_any(skb); |
| 666 | yp->tx_count = 0; |
| 667 | yp->tx_crcl = 0x21; |
| 668 | yp->tx_crch = 0xf3; |
| 669 | yp->tx_state = TX_DATA; |
| 670 | } |
| 671 | break; |
| 672 | case TX_DATA: |
| 673 | b = yp->tx_buf[yp->tx_count++]; |
| 674 | outb(b, THR(dev->base_addr)); |
| 675 | temp = yp->tx_crcl; |
| 676 | yp->tx_crcl = chktabl[temp] ^ yp->tx_crch; |
| 677 | yp->tx_crch = chktabh[temp] ^ b; |
| 678 | if (yp->tx_count >= yp->tx_len) { |
| 679 | yp->tx_state = TX_CRC1; |
| 680 | } |
| 681 | break; |
| 682 | case TX_CRC1: |
| 683 | yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch; |
| 684 | yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff; |
| 685 | outb(yp->tx_crcl, THR(dev->base_addr)); |
| 686 | yp->tx_state = TX_CRC2; |
| 687 | break; |
| 688 | case TX_CRC2: |
| 689 | outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr)); |
| 690 | if (skb_queue_empty(&yp->send_queue)) { |
| 691 | yp->tx_count = (yp->bitrate * yp->txtail) / 8000; |
| 692 | if (yp->dupmode == 2) |
| 693 | yp->tx_count += (yp->bitrate * yp->holdd) / 8; |
| 694 | if (yp->tx_count == 0) |
| 695 | yp->tx_count = 1; |
| 696 | yp->tx_state = TX_TAIL; |
| 697 | } else { |
| 698 | yp->tx_count = 1; |
| 699 | yp->tx_state = TX_HEAD; |
| 700 | } |
| 701 | ++yp->stats.tx_packets; |
| 702 | break; |
| 703 | case TX_TAIL: |
| 704 | if (--yp->tx_count <= 0) { |
| 705 | yp->tx_state = TX_OFF; |
| 706 | ptt_off(dev); |
| 707 | } |
| 708 | break; |
| 709 | } |
| 710 | } |
| 711 | |
| 712 | /*********************************************************************************** |
| 713 | * ISR routine |
| 714 | ************************************************************************************/ |
| 715 | |
| 716 | static irqreturn_t yam_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| 717 | { |
| 718 | struct net_device *dev; |
| 719 | struct yam_port *yp; |
| 720 | unsigned char iir; |
| 721 | int counter = 100; |
| 722 | int i; |
| 723 | int handled = 0; |
| 724 | |
| 725 | for (i = 0; i < NR_PORTS; i++) { |
| 726 | dev = yam_devs[i]; |
| 727 | yp = netdev_priv(dev); |
| 728 | |
| 729 | if (!netif_running(dev)) |
| 730 | continue; |
| 731 | |
| 732 | while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) { |
| 733 | unsigned char msr = inb(MSR(dev->base_addr)); |
| 734 | unsigned char lsr = inb(LSR(dev->base_addr)); |
| 735 | unsigned char rxb; |
| 736 | |
| 737 | handled = 1; |
| 738 | |
| 739 | if (lsr & LSR_OE) |
| 740 | ++yp->stats.rx_fifo_errors; |
| 741 | |
| 742 | yp->dcd = (msr & RX_DCD) ? 1 : 0; |
| 743 | |
| 744 | if (--counter <= 0) { |
| 745 | printk(KERN_ERR "%s: too many irq iir=%d\n", |
| 746 | dev->name, iir); |
| 747 | goto out; |
| 748 | } |
| 749 | if (msr & TX_RDY) { |
| 750 | ++yp->nb_mdint; |
| 751 | yam_tx_byte(dev, yp); |
| 752 | } |
| 753 | if (lsr & LSR_RXC) { |
| 754 | ++yp->nb_rxint; |
| 755 | rxb = inb(RBR(dev->base_addr)); |
| 756 | if (msr & RX_FLAG) |
| 757 | yam_rx_flag(dev, yp); |
| 758 | else |
| 759 | yam_rx_byte(dev, yp, rxb); |
| 760 | } |
| 761 | } |
| 762 | } |
| 763 | out: |
| 764 | return IRQ_RETVAL(handled); |
| 765 | } |
| 766 | |
| 767 | #ifdef CONFIG_PROC_FS |
| 768 | |
| 769 | static void *yam_seq_start(struct seq_file *seq, loff_t *pos) |
| 770 | { |
| 771 | return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL; |
| 772 | } |
| 773 | |
| 774 | static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos) |
| 775 | { |
| 776 | ++*pos; |
| 777 | return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL; |
| 778 | } |
| 779 | |
| 780 | static void yam_seq_stop(struct seq_file *seq, void *v) |
| 781 | { |
| 782 | } |
| 783 | |
| 784 | static int yam_seq_show(struct seq_file *seq, void *v) |
| 785 | { |
| 786 | struct net_device *dev = v; |
| 787 | const struct yam_port *yp = netdev_priv(dev); |
| 788 | |
| 789 | seq_printf(seq, "Device %s\n", dev->name); |
| 790 | seq_printf(seq, " Up %d\n", netif_running(dev)); |
| 791 | seq_printf(seq, " Speed %u\n", yp->bitrate); |
| 792 | seq_printf(seq, " IoBase 0x%x\n", yp->iobase); |
| 793 | seq_printf(seq, " BaudRate %u\n", yp->baudrate); |
| 794 | seq_printf(seq, " IRQ %u\n", yp->irq); |
| 795 | seq_printf(seq, " TxState %u\n", yp->tx_state); |
| 796 | seq_printf(seq, " Duplex %u\n", yp->dupmode); |
| 797 | seq_printf(seq, " HoldDly %u\n", yp->holdd); |
| 798 | seq_printf(seq, " TxDelay %u\n", yp->txd); |
| 799 | seq_printf(seq, " TxTail %u\n", yp->txtail); |
| 800 | seq_printf(seq, " SlotTime %u\n", yp->slot); |
| 801 | seq_printf(seq, " Persist %u\n", yp->pers); |
| 802 | seq_printf(seq, " TxFrames %lu\n", yp->stats.tx_packets); |
| 803 | seq_printf(seq, " RxFrames %lu\n", yp->stats.rx_packets); |
| 804 | seq_printf(seq, " TxInt %u\n", yp->nb_mdint); |
| 805 | seq_printf(seq, " RxInt %u\n", yp->nb_rxint); |
| 806 | seq_printf(seq, " RxOver %lu\n", yp->stats.rx_fifo_errors); |
| 807 | seq_printf(seq, "\n"); |
| 808 | return 0; |
| 809 | } |
| 810 | |
| 811 | static struct seq_operations yam_seqops = { |
| 812 | .start = yam_seq_start, |
| 813 | .next = yam_seq_next, |
| 814 | .stop = yam_seq_stop, |
| 815 | .show = yam_seq_show, |
| 816 | }; |
| 817 | |
| 818 | static int yam_info_open(struct inode *inode, struct file *file) |
| 819 | { |
| 820 | return seq_open(file, &yam_seqops); |
| 821 | } |
| 822 | |
| 823 | static struct file_operations yam_info_fops = { |
| 824 | .owner = THIS_MODULE, |
| 825 | .open = yam_info_open, |
| 826 | .read = seq_read, |
| 827 | .llseek = seq_lseek, |
| 828 | .release = seq_release, |
| 829 | }; |
| 830 | |
| 831 | #endif |
| 832 | |
| 833 | |
| 834 | /* --------------------------------------------------------------------- */ |
| 835 | |
| 836 | static struct net_device_stats *yam_get_stats(struct net_device *dev) |
| 837 | { |
| 838 | struct yam_port *yp; |
| 839 | |
| 840 | if (!dev) |
| 841 | return NULL; |
| 842 | |
| 843 | yp = netdev_priv(dev); |
| 844 | if (yp->magic != YAM_MAGIC) |
| 845 | return NULL; |
| 846 | |
| 847 | /* |
| 848 | * Get the current statistics. This may be called with the |
| 849 | * card open or closed. |
| 850 | */ |
| 851 | return &yp->stats; |
| 852 | } |
| 853 | |
| 854 | /* --------------------------------------------------------------------- */ |
| 855 | |
| 856 | static int yam_open(struct net_device *dev) |
| 857 | { |
| 858 | struct yam_port *yp = netdev_priv(dev); |
| 859 | enum uart u; |
| 860 | int i; |
| 861 | int ret=0; |
| 862 | |
| 863 | printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq); |
| 864 | |
| 865 | if (!dev || !yp->bitrate) |
| 866 | return -ENXIO; |
| 867 | if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT || |
| 868 | dev->irq < 2 || dev->irq > 15) { |
| 869 | return -ENXIO; |
| 870 | } |
| 871 | if (!request_region(dev->base_addr, YAM_EXTENT, dev->name)) |
| 872 | { |
| 873 | printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr); |
| 874 | return -EACCES; |
| 875 | } |
| 876 | if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) { |
| 877 | printk(KERN_ERR "%s: cannot find uart type\n", dev->name); |
| 878 | ret = -EIO; |
| 879 | goto out_release_base; |
| 880 | } |
| 881 | if (fpga_download(dev->base_addr, yp->bitrate)) { |
| 882 | printk(KERN_ERR "%s: cannot init FPGA\n", dev->name); |
| 883 | ret = -EIO; |
| 884 | goto out_release_base; |
| 885 | } |
| 886 | outb(0, IER(dev->base_addr)); |
| 887 | if (request_irq(dev->irq, yam_interrupt, SA_INTERRUPT | SA_SHIRQ, dev->name, dev)) { |
| 888 | printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq); |
| 889 | ret = -EBUSY; |
| 890 | goto out_release_base; |
| 891 | } |
| 892 | |
| 893 | yam_set_uart(dev); |
| 894 | |
| 895 | netif_start_queue(dev); |
| 896 | |
| 897 | yp->slotcnt = yp->slot / 10; |
| 898 | |
| 899 | /* Reset overruns for all ports - FPGA programming makes overruns */ |
| 900 | for (i = 0; i < NR_PORTS; i++) { |
| 901 | struct net_device *dev = yam_devs[i]; |
| 902 | struct yam_port *yp = netdev_priv(dev); |
| 903 | inb(LSR(dev->base_addr)); |
| 904 | yp->stats.rx_fifo_errors = 0; |
| 905 | } |
| 906 | |
| 907 | printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq, |
| 908 | uart_str[u]); |
| 909 | return 0; |
| 910 | |
| 911 | out_release_base: |
| 912 | release_region(dev->base_addr, YAM_EXTENT); |
| 913 | return ret; |
| 914 | } |
| 915 | |
| 916 | /* --------------------------------------------------------------------- */ |
| 917 | |
| 918 | static int yam_close(struct net_device *dev) |
| 919 | { |
| 920 | struct sk_buff *skb; |
| 921 | struct yam_port *yp = netdev_priv(dev); |
| 922 | |
| 923 | if (!dev) |
| 924 | return -EINVAL; |
| 925 | |
| 926 | /* |
| 927 | * disable interrupts |
| 928 | */ |
| 929 | outb(0, IER(dev->base_addr)); |
| 930 | outb(1, MCR(dev->base_addr)); |
| 931 | /* Remove IRQ handler if last */ |
| 932 | free_irq(dev->irq,dev); |
| 933 | release_region(dev->base_addr, YAM_EXTENT); |
| 934 | netif_stop_queue(dev); |
| 935 | while ((skb = skb_dequeue(&yp->send_queue))) |
| 936 | dev_kfree_skb(skb); |
| 937 | |
| 938 | printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n", |
| 939 | yam_drvname, dev->base_addr, dev->irq); |
| 940 | return 0; |
| 941 | } |
| 942 | |
| 943 | /* --------------------------------------------------------------------- */ |
| 944 | |
| 945 | static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| 946 | { |
| 947 | struct yam_port *yp = netdev_priv(dev); |
| 948 | struct yamdrv_ioctl_cfg yi; |
| 949 | struct yamdrv_ioctl_mcs *ym; |
| 950 | int ioctl_cmd; |
| 951 | |
| 952 | if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int))) |
| 953 | return -EFAULT; |
| 954 | |
| 955 | if (yp->magic != YAM_MAGIC) |
| 956 | return -EINVAL; |
| 957 | |
| 958 | if (!capable(CAP_NET_ADMIN)) |
| 959 | return -EPERM; |
| 960 | |
| 961 | if (cmd != SIOCDEVPRIVATE) |
| 962 | return -EINVAL; |
| 963 | |
| 964 | switch (ioctl_cmd) { |
| 965 | |
| 966 | case SIOCYAMRESERVED: |
| 967 | return -EINVAL; /* unused */ |
| 968 | |
| 969 | case SIOCYAMSMCS: |
| 970 | if (netif_running(dev)) |
| 971 | return -EINVAL; /* Cannot change this parameter when up */ |
| 972 | if ((ym = kmalloc(sizeof(struct yamdrv_ioctl_mcs), GFP_KERNEL)) == NULL) |
| 973 | return -ENOBUFS; |
| 974 | ym->bitrate = 9600; |
| 975 | if (copy_from_user(ym, ifr->ifr_data, sizeof(struct yamdrv_ioctl_mcs))) { |
| 976 | kfree(ym); |
| 977 | return -EFAULT; |
| 978 | } |
| 979 | if (ym->bitrate > YAM_MAXBITRATE) { |
| 980 | kfree(ym); |
| 981 | return -EINVAL; |
| 982 | } |
| 983 | add_mcs(ym->bits, ym->bitrate); |
| 984 | kfree(ym); |
| 985 | break; |
| 986 | |
| 987 | case SIOCYAMSCFG: |
| 988 | if (!capable(CAP_SYS_RAWIO)) |
| 989 | return -EPERM; |
| 990 | if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg))) |
| 991 | return -EFAULT; |
| 992 | |
| 993 | if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev)) |
| 994 | return -EINVAL; /* Cannot change this parameter when up */ |
| 995 | if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev)) |
| 996 | return -EINVAL; /* Cannot change this parameter when up */ |
| 997 | if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev)) |
| 998 | return -EINVAL; /* Cannot change this parameter when up */ |
| 999 | if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev)) |
| 1000 | return -EINVAL; /* Cannot change this parameter when up */ |
| 1001 | |
| 1002 | if (yi.cfg.mask & YAM_IOBASE) { |
| 1003 | yp->iobase = yi.cfg.iobase; |
| 1004 | dev->base_addr = yi.cfg.iobase; |
| 1005 | } |
| 1006 | if (yi.cfg.mask & YAM_IRQ) { |
| 1007 | if (yi.cfg.irq > 15) |
| 1008 | return -EINVAL; |
| 1009 | yp->irq = yi.cfg.irq; |
| 1010 | dev->irq = yi.cfg.irq; |
| 1011 | } |
| 1012 | if (yi.cfg.mask & YAM_BITRATE) { |
| 1013 | if (yi.cfg.bitrate > YAM_MAXBITRATE) |
| 1014 | return -EINVAL; |
| 1015 | yp->bitrate = yi.cfg.bitrate; |
| 1016 | } |
| 1017 | if (yi.cfg.mask & YAM_BAUDRATE) { |
| 1018 | if (yi.cfg.baudrate > YAM_MAXBAUDRATE) |
| 1019 | return -EINVAL; |
| 1020 | yp->baudrate = yi.cfg.baudrate; |
| 1021 | } |
| 1022 | if (yi.cfg.mask & YAM_MODE) { |
| 1023 | if (yi.cfg.mode > YAM_MAXMODE) |
| 1024 | return -EINVAL; |
| 1025 | yp->dupmode = yi.cfg.mode; |
| 1026 | } |
| 1027 | if (yi.cfg.mask & YAM_HOLDDLY) { |
| 1028 | if (yi.cfg.holddly > YAM_MAXHOLDDLY) |
| 1029 | return -EINVAL; |
| 1030 | yp->holdd = yi.cfg.holddly; |
| 1031 | } |
| 1032 | if (yi.cfg.mask & YAM_TXDELAY) { |
| 1033 | if (yi.cfg.txdelay > YAM_MAXTXDELAY) |
| 1034 | return -EINVAL; |
| 1035 | yp->txd = yi.cfg.txdelay; |
| 1036 | } |
| 1037 | if (yi.cfg.mask & YAM_TXTAIL) { |
| 1038 | if (yi.cfg.txtail > YAM_MAXTXTAIL) |
| 1039 | return -EINVAL; |
| 1040 | yp->txtail = yi.cfg.txtail; |
| 1041 | } |
| 1042 | if (yi.cfg.mask & YAM_PERSIST) { |
| 1043 | if (yi.cfg.persist > YAM_MAXPERSIST) |
| 1044 | return -EINVAL; |
| 1045 | yp->pers = yi.cfg.persist; |
| 1046 | } |
| 1047 | if (yi.cfg.mask & YAM_SLOTTIME) { |
| 1048 | if (yi.cfg.slottime > YAM_MAXSLOTTIME) |
| 1049 | return -EINVAL; |
| 1050 | yp->slot = yi.cfg.slottime; |
| 1051 | yp->slotcnt = yp->slot / 10; |
| 1052 | } |
| 1053 | break; |
| 1054 | |
| 1055 | case SIOCYAMGCFG: |
| 1056 | yi.cfg.mask = 0xffffffff; |
| 1057 | yi.cfg.iobase = yp->iobase; |
| 1058 | yi.cfg.irq = yp->irq; |
| 1059 | yi.cfg.bitrate = yp->bitrate; |
| 1060 | yi.cfg.baudrate = yp->baudrate; |
| 1061 | yi.cfg.mode = yp->dupmode; |
| 1062 | yi.cfg.txdelay = yp->txd; |
| 1063 | yi.cfg.holddly = yp->holdd; |
| 1064 | yi.cfg.txtail = yp->txtail; |
| 1065 | yi.cfg.persist = yp->pers; |
| 1066 | yi.cfg.slottime = yp->slot; |
| 1067 | if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg))) |
| 1068 | return -EFAULT; |
| 1069 | break; |
| 1070 | |
| 1071 | default: |
| 1072 | return -EINVAL; |
| 1073 | |
| 1074 | } |
| 1075 | |
| 1076 | return 0; |
| 1077 | } |
| 1078 | |
| 1079 | /* --------------------------------------------------------------------- */ |
| 1080 | |
| 1081 | static int yam_set_mac_address(struct net_device *dev, void *addr) |
| 1082 | { |
| 1083 | struct sockaddr *sa = (struct sockaddr *) addr; |
| 1084 | |
| 1085 | /* addr is an AX.25 shifted ASCII mac address */ |
| 1086 | memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); |
| 1087 | return 0; |
| 1088 | } |
| 1089 | |
| 1090 | /* --------------------------------------------------------------------- */ |
| 1091 | |
| 1092 | static void yam_setup(struct net_device *dev) |
| 1093 | { |
| 1094 | struct yam_port *yp = netdev_priv(dev); |
| 1095 | |
| 1096 | yp->magic = YAM_MAGIC; |
| 1097 | yp->bitrate = DEFAULT_BITRATE; |
| 1098 | yp->baudrate = DEFAULT_BITRATE * 2; |
| 1099 | yp->iobase = 0; |
| 1100 | yp->irq = 0; |
| 1101 | yp->dupmode = 0; |
| 1102 | yp->holdd = DEFAULT_HOLDD; |
| 1103 | yp->txd = DEFAULT_TXD; |
| 1104 | yp->txtail = DEFAULT_TXTAIL; |
| 1105 | yp->slot = DEFAULT_SLOT; |
| 1106 | yp->pers = DEFAULT_PERS; |
| 1107 | yp->dev = dev; |
| 1108 | |
| 1109 | dev->base_addr = yp->iobase; |
| 1110 | dev->irq = yp->irq; |
| 1111 | SET_MODULE_OWNER(dev); |
| 1112 | |
| 1113 | dev->open = yam_open; |
| 1114 | dev->stop = yam_close; |
| 1115 | dev->do_ioctl = yam_ioctl; |
| 1116 | dev->hard_start_xmit = yam_send_packet; |
| 1117 | dev->get_stats = yam_get_stats; |
| 1118 | |
| 1119 | skb_queue_head_init(&yp->send_queue); |
| 1120 | |
| 1121 | #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) |
| 1122 | dev->hard_header = ax25_encapsulate; |
| 1123 | dev->rebuild_header = ax25_rebuild_header; |
| 1124 | #else /* CONFIG_AX25 || CONFIG_AX25_MODULE */ |
| 1125 | dev->hard_header = NULL; |
| 1126 | dev->rebuild_header = NULL; |
| 1127 | #endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */ |
| 1128 | |
| 1129 | dev->set_mac_address = yam_set_mac_address; |
| 1130 | |
| 1131 | dev->type = ARPHRD_AX25; /* AF_AX25 device */ |
| 1132 | dev->hard_header_len = 73; /* We do digipeaters now */ |
| 1133 | dev->mtu = 256; /* AX25 is the default */ |
| 1134 | dev->addr_len = 7; /* sizeof an ax.25 address */ |
| 1135 | memcpy(dev->broadcast, ax25_bcast, 7); |
| 1136 | memcpy(dev->dev_addr, ax25_test, 7); |
| 1137 | |
| 1138 | } |
| 1139 | |
| 1140 | static int __init yam_init_driver(void) |
| 1141 | { |
| 1142 | struct net_device *dev; |
| 1143 | int i, err; |
| 1144 | char name[IFNAMSIZ]; |
| 1145 | |
| 1146 | printk(yam_drvinfo); |
| 1147 | |
| 1148 | for (i = 0; i < NR_PORTS; i++) { |
| 1149 | sprintf(name, "yam%d", i); |
| 1150 | |
| 1151 | dev = alloc_netdev(sizeof(struct yam_port), name, |
| 1152 | yam_setup); |
| 1153 | if (!dev) { |
| 1154 | printk(KERN_ERR "yam: cannot allocate net device %s\n", |
| 1155 | dev->name); |
| 1156 | err = -ENOMEM; |
| 1157 | goto error; |
| 1158 | } |
| 1159 | |
| 1160 | err = register_netdev(dev); |
| 1161 | if (err) { |
| 1162 | printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name); |
| 1163 | goto error; |
| 1164 | } |
| 1165 | yam_devs[i] = dev; |
| 1166 | |
| 1167 | } |
| 1168 | |
| 1169 | yam_timer.function = yam_dotimer; |
| 1170 | yam_timer.expires = jiffies + HZ / 100; |
| 1171 | add_timer(&yam_timer); |
| 1172 | |
| 1173 | proc_net_fops_create("yam", S_IRUGO, &yam_info_fops); |
| 1174 | return 0; |
| 1175 | error: |
| 1176 | while (--i >= 0) { |
| 1177 | unregister_netdev(yam_devs[i]); |
| 1178 | free_netdev(yam_devs[i]); |
| 1179 | } |
| 1180 | return err; |
| 1181 | } |
| 1182 | |
| 1183 | /* --------------------------------------------------------------------- */ |
| 1184 | |
| 1185 | static void __exit yam_cleanup_driver(void) |
| 1186 | { |
| 1187 | struct yam_mcs *p; |
| 1188 | int i; |
| 1189 | |
| 1190 | del_timer(&yam_timer); |
| 1191 | for (i = 0; i < NR_PORTS; i++) { |
| 1192 | struct net_device *dev = yam_devs[i]; |
| 1193 | if (dev) { |
| 1194 | unregister_netdev(dev); |
| 1195 | free_netdev(dev); |
| 1196 | } |
| 1197 | } |
| 1198 | |
| 1199 | while (yam_data) { |
| 1200 | p = yam_data; |
| 1201 | yam_data = yam_data->next; |
| 1202 | kfree(p); |
| 1203 | } |
| 1204 | |
| 1205 | proc_net_remove("yam"); |
| 1206 | } |
| 1207 | |
| 1208 | /* --------------------------------------------------------------------- */ |
| 1209 | |
| 1210 | MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr"); |
| 1211 | MODULE_DESCRIPTION("Yam amateur radio modem driver"); |
| 1212 | MODULE_LICENSE("GPL"); |
| 1213 | |
| 1214 | module_init(yam_init_driver); |
| 1215 | module_exit(yam_cleanup_driver); |
| 1216 | |
| 1217 | /* --------------------------------------------------------------------- */ |
| 1218 | |