blob: 250dc9d6f63502d7145b0797f77780aadf04c87b [file] [log] [blame]
Simon Shields2d00f352018-09-09 20:38:25 +10001// SPDX-License-Identifier: GPL-2.0+
2//
3// Driver for Panasonic AN30259A 3-channel LED driver
4//
5// Copyright (c) 2018 Simon Shields <simon@lineageos.org>
6//
7// Datasheet:
8// https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
9
10#include <linux/i2c.h>
11#include <linux/leds.h>
12#include <linux/module.h>
13#include <linux/mutex.h>
14#include <linux/of.h>
15#include <linux/regmap.h>
Simon Shields2d00f352018-09-09 20:38:25 +100016
17#define AN30259A_MAX_LEDS 3
18
19#define AN30259A_REG_SRESET 0x00
20#define AN30259A_LED_SRESET BIT(0)
21
22/* LED power registers */
23#define AN30259A_REG_LED_ON 0x01
24#define AN30259A_LED_EN(x) BIT((x) - 1)
25#define AN30259A_LED_SLOPE(x) BIT(((x) - 1) + 4)
26
27#define AN30259A_REG_LEDCC(x) (0x03 + ((x) - 1))
28
29/* slope control registers */
30#define AN30259A_REG_SLOPE(x) (0x06 + ((x) - 1))
31#define AN30259A_LED_SLOPETIME1(x) (x)
32#define AN30259A_LED_SLOPETIME2(x) ((x) << 4)
33
34#define AN30259A_REG_LEDCNT1(x) (0x09 + (4 * ((x) - 1)))
35#define AN30259A_LED_DUTYMAX(x) ((x) << 4)
36#define AN30259A_LED_DUTYMID(x) (x)
37
38#define AN30259A_REG_LEDCNT2(x) (0x0A + (4 * ((x) - 1)))
39#define AN30259A_LED_DELAY(x) ((x) << 4)
40#define AN30259A_LED_DUTYMIN(x) (x)
41
42/* detention time control (length of each slope step) */
43#define AN30259A_REG_LEDCNT3(x) (0x0B + (4 * ((x) - 1)))
44#define AN30259A_LED_DT1(x) (x)
45#define AN30259A_LED_DT2(x) ((x) << 4)
46
47#define AN30259A_REG_LEDCNT4(x) (0x0C + (4 * ((x) - 1)))
48#define AN30259A_LED_DT3(x) (x)
49#define AN30259A_LED_DT4(x) ((x) << 4)
50
51#define AN30259A_REG_MAX 0x14
52
53#define AN30259A_BLINK_MAX_TIME 7500 /* ms */
54#define AN30259A_SLOPE_RESOLUTION 500 /* ms */
55
Jacek Anaszewski18172082019-06-09 20:19:04 +020056#define AN30259A_NAME "an30259a"
57
Simon Shields2d00f352018-09-09 20:38:25 +100058#define STATE_OFF 0
59#define STATE_KEEP 1
60#define STATE_ON 2
61
62struct an30259a;
63
64struct an30259a_led {
65 struct an30259a *chip;
Jacek Anaszewski18172082019-06-09 20:19:04 +020066 struct fwnode_handle *fwnode;
Simon Shields2d00f352018-09-09 20:38:25 +100067 struct led_classdev cdev;
68 u32 num;
69 u32 default_state;
70 bool sloping;
Simon Shields2d00f352018-09-09 20:38:25 +100071};
72
73struct an30259a {
74 struct mutex mutex; /* held when writing to registers */
75 struct i2c_client *client;
76 struct an30259a_led leds[AN30259A_MAX_LEDS];
77 struct regmap *regmap;
78 int num_leds;
79};
80
81static int an30259a_brightness_set(struct led_classdev *cdev,
82 enum led_brightness brightness)
83{
84 struct an30259a_led *led;
85 int ret;
86 unsigned int led_on;
87
88 led = container_of(cdev, struct an30259a_led, cdev);
89 mutex_lock(&led->chip->mutex);
90
91 ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
92 if (ret)
93 goto error;
94
95 switch (brightness) {
96 case LED_OFF:
97 led_on &= ~AN30259A_LED_EN(led->num);
98 led_on &= ~AN30259A_LED_SLOPE(led->num);
99 led->sloping = false;
100 break;
101 default:
102 led_on |= AN30259A_LED_EN(led->num);
103 if (led->sloping)
104 led_on |= AN30259A_LED_SLOPE(led->num);
105 ret = regmap_write(led->chip->regmap,
106 AN30259A_REG_LEDCNT1(led->num),
107 AN30259A_LED_DUTYMAX(0xf) |
108 AN30259A_LED_DUTYMID(0xf));
109 if (ret)
110 goto error;
111 break;
112 }
113
114 ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
115 if (ret)
116 goto error;
117
118 ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCC(led->num),
119 brightness);
120
121error:
122 mutex_unlock(&led->chip->mutex);
123
124 return ret;
125}
126
127static int an30259a_blink_set(struct led_classdev *cdev,
128 unsigned long *delay_off, unsigned long *delay_on)
129{
130 struct an30259a_led *led;
131 int ret, num;
132 unsigned int led_on;
133 unsigned long off = *delay_off, on = *delay_on;
134
135 led = container_of(cdev, struct an30259a_led, cdev);
136
137 mutex_lock(&led->chip->mutex);
138 num = led->num;
139
140 /* slope time can only be a multiple of 500ms. */
141 if (off % AN30259A_SLOPE_RESOLUTION || on % AN30259A_SLOPE_RESOLUTION) {
142 ret = -EINVAL;
143 goto error;
144 }
145
146 /* up to a maximum of 7500ms. */
147 if (off > AN30259A_BLINK_MAX_TIME || on > AN30259A_BLINK_MAX_TIME) {
148 ret = -EINVAL;
149 goto error;
150 }
151
152 /* if no blink specified, default to 1 Hz. */
153 if (!off && !on) {
154 *delay_off = off = 500;
155 *delay_on = on = 500;
156 }
157
158 /* convert into values the HW will understand. */
159 off /= AN30259A_SLOPE_RESOLUTION;
160 on /= AN30259A_SLOPE_RESOLUTION;
161
162 /* duty min should be zero (=off), delay should be zero. */
163 ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT2(num),
164 AN30259A_LED_DELAY(0) | AN30259A_LED_DUTYMIN(0));
165 if (ret)
166 goto error;
167
168 /* reset detention time (no "breathing" effect). */
169 ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT3(num),
170 AN30259A_LED_DT1(0) | AN30259A_LED_DT2(0));
171 if (ret)
172 goto error;
173 ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT4(num),
174 AN30259A_LED_DT3(0) | AN30259A_LED_DT4(0));
175 if (ret)
176 goto error;
177
178 /* slope time controls on/off cycle length. */
179 ret = regmap_write(led->chip->regmap, AN30259A_REG_SLOPE(num),
180 AN30259A_LED_SLOPETIME1(off) |
181 AN30259A_LED_SLOPETIME2(on));
182 if (ret)
183 goto error;
184
185 /* Finally, enable slope mode. */
186 ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
187 if (ret)
188 goto error;
189
190 led_on |= AN30259A_LED_SLOPE(num) | AN30259A_LED_EN(led->num);
191
192 ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
193
194 if (!ret)
195 led->sloping = true;
196error:
197 mutex_unlock(&led->chip->mutex);
198
199 return ret;
200}
201
202static int an30259a_dt_init(struct i2c_client *client,
203 struct an30259a *chip)
204{
205 struct device_node *np = client->dev.of_node, *child;
206 int count, ret;
207 int i = 0;
208 const char *str;
209 struct an30259a_led *led;
210
211 count = of_get_child_count(np);
212 if (!count || count > AN30259A_MAX_LEDS)
213 return -EINVAL;
214
215 for_each_available_child_of_node(np, child) {
216 u32 source;
217
218 ret = of_property_read_u32(child, "reg", &source);
219 if (ret != 0 || !source || source > AN30259A_MAX_LEDS) {
220 dev_err(&client->dev, "Couldn't read LED address: %d\n",
221 ret);
222 count--;
223 continue;
224 }
225
226 led = &chip->leds[i];
227
228 led->num = source;
229 led->chip = chip;
Jacek Anaszewski18172082019-06-09 20:19:04 +0200230 led->fwnode = of_fwnode_handle(child);
Simon Shields2d00f352018-09-09 20:38:25 +1000231
232 if (!of_property_read_string(child, "default-state", &str)) {
233 if (!strcmp(str, "on"))
234 led->default_state = STATE_ON;
235 else if (!strcmp(str, "keep"))
236 led->default_state = STATE_KEEP;
237 else
238 led->default_state = STATE_OFF;
239 }
240
241 of_property_read_string(child, "linux,default-trigger",
242 &led->cdev.default_trigger);
243
244 i++;
245 }
246
247 if (!count)
248 return -EINVAL;
249
250 chip->num_leds = i;
251
252 return 0;
253}
254
255static const struct regmap_config an30259a_regmap_config = {
256 .reg_bits = 8,
257 .val_bits = 8,
258 .max_register = AN30259A_REG_MAX,
259};
260
261static void an30259a_init_default_state(struct an30259a_led *led)
262{
263 struct an30259a *chip = led->chip;
264 int led_on, err;
265
266 switch (led->default_state) {
267 case STATE_ON:
268 led->cdev.brightness = LED_FULL;
269 break;
270 case STATE_KEEP:
271 err = regmap_read(chip->regmap, AN30259A_REG_LED_ON, &led_on);
272 if (err)
273 break;
274
275 if (!(led_on & AN30259A_LED_EN(led->num))) {
276 led->cdev.brightness = LED_OFF;
277 break;
278 }
279 regmap_read(chip->regmap, AN30259A_REG_LEDCC(led->num),
280 &led->cdev.brightness);
281 break;
282 default:
283 led->cdev.brightness = LED_OFF;
284 }
285
286 an30259a_brightness_set(&led->cdev, led->cdev.brightness);
287}
288
289static int an30259a_probe(struct i2c_client *client)
290{
291 struct an30259a *chip;
292 int i, err;
293
294 chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
295 if (!chip)
296 return -ENOMEM;
297
298 err = an30259a_dt_init(client, chip);
299 if (err < 0)
300 return err;
301
302 mutex_init(&chip->mutex);
303 chip->client = client;
304 i2c_set_clientdata(client, chip);
305
306 chip->regmap = devm_regmap_init_i2c(client, &an30259a_regmap_config);
307
308 for (i = 0; i < chip->num_leds; i++) {
Jacek Anaszewski18172082019-06-09 20:19:04 +0200309 struct led_init_data init_data = {};
310
Simon Shields2d00f352018-09-09 20:38:25 +1000311 an30259a_init_default_state(&chip->leds[i]);
312 chip->leds[i].cdev.brightness_set_blocking =
313 an30259a_brightness_set;
314 chip->leds[i].cdev.blink_set = an30259a_blink_set;
315
Jacek Anaszewski18172082019-06-09 20:19:04 +0200316 init_data.fwnode = chip->leds[i].fwnode;
317 init_data.devicename = AN30259A_NAME;
318 init_data.default_label = ":";
319
320 err = devm_led_classdev_register_ext(&client->dev,
321 &chip->leds[i].cdev,
322 &init_data);
Simon Shields2d00f352018-09-09 20:38:25 +1000323 if (err < 0)
324 goto exit;
325 }
326 return 0;
327
328exit:
329 mutex_destroy(&chip->mutex);
330 return err;
331}
332
333static int an30259a_remove(struct i2c_client *client)
334{
335 struct an30259a *chip = i2c_get_clientdata(client);
336
337 mutex_destroy(&chip->mutex);
338
339 return 0;
340}
341
342static const struct of_device_id an30259a_match_table[] = {
343 { .compatible = "panasonic,an30259a", },
344 { /* sentinel */ },
345};
346
347MODULE_DEVICE_TABLE(of, an30259a_match_table);
348
349static const struct i2c_device_id an30259a_id[] = {
350 { "an30259a", 0 },
351 { /* sentinel */ },
352};
353MODULE_DEVICE_TABLE(i2c, an30259a_id);
354
355static struct i2c_driver an30259a_driver = {
356 .driver = {
Christophe JAILLETf3b357c2019-07-21 22:59:55 +0200357 .name = "leds-an30259a",
Simon Shields2d00f352018-09-09 20:38:25 +1000358 .of_match_table = of_match_ptr(an30259a_match_table),
359 },
360 .probe_new = an30259a_probe,
361 .remove = an30259a_remove,
362 .id_table = an30259a_id,
363};
364
365module_i2c_driver(an30259a_driver);
366
367MODULE_AUTHOR("Simon Shields <simon@lineageos.org>");
Christophe JAILLETf3b357c2019-07-21 22:59:55 +0200368MODULE_DESCRIPTION("AN30259A LED driver");
Simon Shields2d00f352018-09-09 20:38:25 +1000369MODULE_LICENSE("GPL v2");