arch/arm/boot/dts/dbx5x0.dtsi

/*
 * Copyright 2012 Linaro Ltd
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "skeleton.dtsi"

/ {
	soc-u9500 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "stericsson,db8500";
		interrupt-parent = <&intc>;
		ranges;

		intc: interrupt-controller@a0411000 {
			compatible = "arm,cortex-a9-gic";
			#interrupt-cells = <3>;
			#address-cells = <1>;
			interrupt-controller;
			reg = <0xa0411000 0x1000>,
			      <0xa0410100 0x100>;
		};

		L2: l2-cache {
			compatible = "arm,pl310-cache";
			reg = <0xa0412000 0x1000>;
			interrupts = <0 13 4>;
			cache-unified;
			cache-level = <2>;
		};

		pmu {
			compatible = "arm,cortex-a9-pmu";
			interrupts = <0 7 0x4>;
		};

		timer@a0410600 {
			compatible = "arm,cortex-a9-twd-timer";
			reg = <0xa0410600 0x20>;
			interrupts = <1 13 0x304>;
		};

		rtc@80154000 {
			compatible = "arm,rtc-pl031", "arm,primecell";
			reg = <0x80154000 0x1000>;
			interrupts = <0 18 0x4>;
		};

		gpio0: gpio@8012e000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8012e000 0x80>;
			interrupts = <0 119 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <0>;
		};

		gpio1: gpio@8012e080 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8012e080 0x80>;
			interrupts = <0 120 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <1>;
		};

		gpio2: gpio@8000e000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e000 0x80>;
			interrupts = <0 121 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <2>;
		};

		gpio3: gpio@8000e080 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e080 0x80>;
			interrupts = <0 122 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <3>;
		};

		gpio4: gpio@8000e100 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e100 0x80>;
			interrupts = <0 123 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <4>;
		};

		gpio5: gpio@8000e180 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8000e180 0x80>;
			interrupts = <0 124 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <5>;
		};

		gpio6: gpio@8011e000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8011e000 0x80>;
			interrupts = <0 125 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <6>;
		};

		gpio7: gpio@8011e080 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0x8011e080 0x80>;
			interrupts = <0 126 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <7>;
		};

		gpio8: gpio@a03fe000 {
			compatible = "stericsson,db8500-gpio",
				"st,nomadik-gpio";
			reg =  <0xa03fe000 0x80>;
			interrupts = <0 127 0x4>;
			interrupt-controller;
			#interrupt-cells = <2>;
			st,supports-sleepmode;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-bank = <8>;
		};

		pinctrl {
			compatible = "stericsson,nmk_pinctrl";
		};

		usb@a03e0000 {
			compatible = "stericsson,db8500-musb",
				"mentor,musb";
			reg = <0xa03e0000 0x10000>;
			interrupts = <0 23 0x4>;
		};

		dma-controller@801C0000 {
			compatible = "stericsson,db8500-dma40",
					"stericsson,dma40";
			reg = <0x801C0000 0x1000 0x40010000 0x800>;
			interrupts = <0 25 0x4>;
		};

		prcmu@80157000 {
			compatible = "stericsson,db8500-prcmu";
			reg = <0x80157000 0x1000>;
			interrupts = <0 47 0x4>;
			#address-cells = <1>;
			#size-cells = <1>;
			interrupt-controller;
			#interrupt-cells = <2>;
			ranges;

			prcmu-timer-4@80157450 {
				compatible = "stericsson,db8500-prcmu-timer-4";
				reg = <0x80157450 0xC>;
			};

			db8500-prcmu-regulators {
				compatible = "stericsson,db8500-prcmu-regulator";

				// DB8500_REGULATOR_VAPE
				db8500_vape_reg: db8500_vape {
					regulator-compatible = "db8500_vape";
					regulator-always-on;
				};

				// DB8500_REGULATOR_VARM
				db8500_varm_reg: db8500_varm {
					regulator-compatible = "db8500_varm";
				};

				// DB8500_REGULATOR_VMODEM
				db8500_vmodem_reg: db8500_vmodem {
					regulator-compatible = "db8500_vmodem";
				};

				// DB8500_REGULATOR_VPLL
				db8500_vpll_reg: db8500_vpll {
					regulator-compatible = "db8500_vpll";
				};

				// DB8500_REGULATOR_VSMPS1
				db8500_vsmps1_reg: db8500_vsmps1 {
					regulator-compatible = "db8500_vsmps1";
				};

				// DB8500_REGULATOR_VSMPS2
				db8500_vsmps2_reg: db8500_vsmps2 {
					regulator-compatible = "db8500_vsmps2";
				};

				// DB8500_REGULATOR_VSMPS3
				db8500_vsmps3_reg: db8500_vsmps3 {
					regulator-compatible = "db8500_vsmps3";
				};

				// DB8500_REGULATOR_VRF1
				db8500_vrf1_reg: db8500_vrf1 {
					regulator-compatible = "db8500_vrf1";
				};

				// DB8500_REGULATOR_SWITCH_SVAMMDSP
				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
					regulator-compatible = "db8500_sva_mmdsp";
				};

				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
					regulator-compatible = "db8500_sva_mmdsp_ret";
				};

				// DB8500_REGULATOR_SWITCH_SVAPIPE
				db8500_sva_pipe_reg: db8500_sva_pipe {
					regulator-compatible = "db8500_sva_pipe";
				};

				// DB8500_REGULATOR_SWITCH_SIAMMDSP
				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
					regulator-compatible = "db8500_sia_mmdsp";
				};

				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
				};

				// DB8500_REGULATOR_SWITCH_SIAPIPE
				db8500_sia_pipe_reg: db8500_sia_pipe {
					regulator-compatible = "db8500_sia_pipe";
				};

				// DB8500_REGULATOR_SWITCH_SGA
				db8500_sga_reg: db8500_sga {
					regulator-compatible = "db8500_sga";
					vin-supply = <&db8500_vape_reg>;
				};

				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
					regulator-compatible = "db8500_b2r2_mcde";
					vin-supply = <&db8500_vape_reg>;
				};

				// DB8500_REGULATOR_SWITCH_ESRAM12
				db8500_esram12_reg: db8500_esram12 {
					regulator-compatible = "db8500_esram12";
				};

				// DB8500_REGULATOR_SWITCH_ESRAM12RET
				db8500_esram12_ret_reg: db8500_esram12_ret {
					regulator-compatible = "db8500_esram12_ret";
				};

				// DB8500_REGULATOR_SWITCH_ESRAM34
				db8500_esram34_reg: db8500_esram34 {
					regulator-compatible = "db8500_esram34";
				};

				// DB8500_REGULATOR_SWITCH_ESRAM34RET
				db8500_esram34_ret_reg: db8500_esram34_ret {
					regulator-compatible = "db8500_esram34_ret";
				};
			};

			ab8500@5 {
				compatible = "stericsson,ab8500";
				reg = <5>; /* mailbox 5 is i2c */
				interrupt-parent = <&intc>;
				interrupts = <0 40 0x4>;
				interrupt-controller;
				#interrupt-cells = <2>;

				ab8500-rtc {
					compatible = "stericsson,ab8500-rtc";
					interrupts = <17 0x4
					              18 0x4>;
					interrupt-names = "60S", "ALARM";
				};

				ab8500-gpadc {
					compatible = "stericsson,ab8500-gpadc";
					interrupts = <32 0x4
						      39 0x4>;
					interrupt-names = "HW_CONV_END", "SW_CONV_END";
					vddadc-supply = <&ab8500_ldo_tvout_reg>;
				};

				ab8500-usb {
					compatible = "stericsson,ab8500-usb";
					interrupts = < 90 0x4
						       96 0x4
						       14 0x4
						       15 0x4
						       79 0x4
						       74 0x4
						       75 0x4>;
					interrupt-names = "ID_WAKEUP_R",
							  "ID_WAKEUP_F",
							  "VBUS_DET_F",
							  "VBUS_DET_R",
							  "USB_LINK_STATUS",
							  "USB_ADP_PROBE_PLUG",
							  "USB_ADP_PROBE_UNPLUG";
					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
					v-ape-supply = <&db8500_vape_reg>;
					musb_1v8-supply = <&db8500_vsmps2_reg>;
				};

				ab8500-ponkey {
					compatible = "stericsson,ab8500-poweron-key";
					interrupts = <6 0x4
						      7 0x4>;
					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
				};

				ab8500-sysctrl {
					compatible = "stericsson,ab8500-sysctrl";
				};

				ab8500-pwm {
					compatible = "stericsson,ab8500-pwm";
				};

				ab8500-debugfs {
					compatible = "stericsson,ab8500-debug";
				};

				codec: ab8500-codec {
					compatible = "stericsson,ab8500-codec";

					stericsson,earpeice-cmv = <950>; /* Units in mV. */
				};

				ab8500-regulators {
					compatible = "stericsson,ab8500-regulator";

					// supplies to the display/camera
					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
						regulator-compatible = "ab8500_ldo_aux1";
						regulator-min-microvolt = <2500000>;
						regulator-max-microvolt = <2900000>;
						regulator-boot-on;
						/* BUG: If turned off MMC will be affected. */
						regulator-always-on;
					};

					// supplies to the on-board eMMC
					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
						regulator-compatible = "ab8500_ldo_aux2";
						regulator-min-microvolt = <1100000>;
						regulator-max-microvolt = <3300000>;
					};

					// supply for VAUX3; SDcard slots
					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
						regulator-compatible = "ab8500_ldo_aux3";
						regulator-min-microvolt = <1100000>;
						regulator-max-microvolt = <3300000>;
					};

					// supply for v-intcore12; VINTCORE12 LDO
					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
						regulator-compatible = "ab8500_ldo_initcore";
					};

					// supply for tvout; gpadc; TVOUT LDO
					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
						regulator-compatible = "ab8500_ldo_tvout";
					};

					// supply for ab8500-usb; USB LDO
					ab8500_ldo_usb_reg: ab8500_ldo_usb {
						regulator-compatible = "ab8500_ldo_usb";
					};

					// supply for ab8500-vaudio; VAUDIO LDO
					ab8500_ldo_audio_reg: ab8500_ldo_audio {
						regulator-compatible = "ab8500_ldo_audio";
					};

					// supply for v-anamic1 VAMic1-LDO
					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
						regulator-compatible = "ab8500_ldo_anamic1";
					};

					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
						regulator-compatible = "ab8500_ldo_amamic2";
					};

					// supply for v-dmic; VDMIC LDO
					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
						regulator-compatible = "ab8500_ldo_dmic";
					};

					// supply for U8500 CSI/DSI; VANA LDO
					ab8500_ldo_ana_reg: ab8500_ldo_ana {
						regulator-compatible = "ab8500_ldo_ana";
					};
				};
			};
		};

		i2c@80004000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
			reg = <0x80004000 0x1000>;
			interrupts = <0 21 0x4>;
			arm,primecell-periphid = <0x180024>;

			#address-cells = <1>;
			#size-cells = <0>;
			v-i2c-supply = <&db8500_vape_reg>;

			clock-frequency = <400000>;
		};

		i2c@80122000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
			reg = <0x80122000 0x1000>;
			interrupts = <0 22 0x4>;
			arm,primecell-periphid = <0x180024>;

			#address-cells = <1>;
			#size-cells = <0>;
			v-i2c-supply = <&db8500_vape_reg>;

			clock-frequency = <400000>;
		};

		i2c@80128000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
			reg = <0x80128000 0x1000>;
			interrupts = <0 55 0x4>;
			arm,primecell-periphid = <0x180024>;

			#address-cells = <1>;
			#size-cells = <0>;
			v-i2c-supply = <&db8500_vape_reg>;

			clock-frequency = <400000>;
		};

		i2c@80110000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
			reg = <0x80110000 0x1000>;
			interrupts = <0 12 0x4>;
			arm,primecell-periphid = <0x180024>;

			#address-cells = <1>;
			#size-cells = <0>;
			v-i2c-supply = <&db8500_vape_reg>;

			clock-frequency = <400000>;
		};

		i2c@8012a000 {
			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
			reg = <0x8012a000 0x1000>;
			interrupts = <0 51 0x4>;
			arm,primecell-periphid = <0x180024>;

			#address-cells = <1>;
			#size-cells = <0>;
			v-i2c-supply = <&db8500_vape_reg>;

			clock-frequency = <400000>;
		};

		ssp@80002000 {
			compatible = "arm,pl022", "arm,primecell";
			reg = <0x80002000 0x1000>;
			interrupts = <0 14 0x4>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";

			// Add one of these for each child device
			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
				    &gpio6 22 0x4 &gpio7 0 0x4>;

		};

		uart@80120000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x80120000 0x1000>;
			interrupts = <0 11 0x4>;
			status = "disabled";
		};
		uart@80121000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x80121000 0x1000>;
			interrupts = <0 19 0x4>;
			status = "disabled";
		};
		uart@80007000 {
			compatible = "arm,pl011", "arm,primecell";
			reg = <0x80007000 0x1000>;
			interrupts = <0 26 0x4>;
			status = "disabled";
		};

		sdi0_per1@80126000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80126000 0x1000>;
			interrupts = <0 60 0x4>;
			status = "disabled";
		};

		sdi1_per2@80118000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80118000 0x1000>;
			interrupts = <0 50 0x4>;
			status = "disabled";
		};

		sdi2_per3@80005000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80005000 0x1000>;
			interrupts = <0 41 0x4>;
			status = "disabled";
		};

		sdi3_per2@80119000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80119000 0x1000>;
			interrupts = <0 59 0x4>;
			status = "disabled";
		};

		sdi4_per2@80114000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80114000 0x1000>;
			interrupts = <0 99 0x4>;
			status = "disabled";
		};

		sdi5_per3@80008000 {
			compatible = "arm,pl18x", "arm,primecell";
			reg = <0x80008000 0x1000>;
			interrupts = <0 100 0x4>;
			status = "disabled";
		};

		msp0: msp@80123000 {
			compatible = "stericsson,ux500-msp-i2s";
			reg = <0x80123000 0x1000>;
			interrupts = <0 31 0x4>;
			v-ape-supply = <&db8500_vape_reg>;
			status = "disabled";
		};

		msp1: msp@80124000 {
			compatible = "stericsson,ux500-msp-i2s";
			reg = <0x80124000 0x1000>;
			interrupts = <0 62 0x4>;
			v-ape-supply = <&db8500_vape_reg>;
			status = "disabled";
		};

		// HDMI sound
		msp2: msp@80117000 {
			compatible = "stericsson,ux500-msp-i2s";
			reg = <0x80117000 0x1000>;
			interrupts = <0 98 0x4>;
			v-ape-supply = <&db8500_vape_reg>;
			status = "disabled";
		};

		msp3: msp@80125000 {
			compatible = "stericsson,ux500-msp-i2s";
			reg = <0x80125000 0x1000>;
			interrupts = <0 62 0x4>;
			v-ape-supply = <&db8500_vape_reg>;
			status = "disabled";
		};

		external-bus@50000000 {
			compatible = "simple-bus";
			reg = <0x50000000 0x4000000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x50000000 0x4000000>;
			status = "disabled";
		};

		vmmci: regulator-gpio {
			compatible = "regulator-gpio";

			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2600000>;
			regulator-name = "mmci-reg";
			regulator-type = "voltage";

			gpios = <&tc3589x_gpio 18 0x4>;
			gpio-enable = <&tc3589x_gpio 17 0x4>;
			states = <1800000 0x1
				  2900000 0x0>;
		};
	};
};