| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef __LINUX_UACCESS_H__ |
| #define __LINUX_UACCESS_H__ |
| |
| #include <linux/sched.h> |
| #include <linux/thread_info.h> |
| #include <linux/kasan-checks.h> |
| |
| #define uaccess_kernel() segment_eq(get_fs(), KERNEL_DS) |
| |
| #include <asm/uaccess.h> |
| |
| /* |
| * Architectures should provide two primitives (raw_copy_{to,from}_user()) |
| * and get rid of their private instances of copy_{to,from}_user() and |
| * __copy_{to,from}_user{,_inatomic}(). |
| * |
| * raw_copy_{to,from}_user(to, from, size) should copy up to size bytes and |
| * return the amount left to copy. They should assume that access_ok() has |
| * already been checked (and succeeded); they should *not* zero-pad anything. |
| * No KASAN or object size checks either - those belong here. |
| * |
| * Both of these functions should attempt to copy size bytes starting at from |
| * into the area starting at to. They must not fetch or store anything |
| * outside of those areas. Return value must be between 0 (everything |
| * copied successfully) and size (nothing copied). |
| * |
| * If raw_copy_{to,from}_user(to, from, size) returns N, size - N bytes starting |
| * at to must become equal to the bytes fetched from the corresponding area |
| * starting at from. All data past to + size - N must be left unmodified. |
| * |
| * If copying succeeds, the return value must be 0. If some data cannot be |
| * fetched, it is permitted to copy less than had been fetched; the only |
| * hard requirement is that not storing anything at all (i.e. returning size) |
| * should happen only when nothing could be copied. In other words, you don't |
| * have to squeeze as much as possible - it is allowed, but not necessary. |
| * |
| * For raw_copy_from_user() to always points to kernel memory and no faults |
| * on store should happen. Interpretation of from is affected by set_fs(). |
| * For raw_copy_to_user() it's the other way round. |
| * |
| * Both can be inlined - it's up to architectures whether it wants to bother |
| * with that. They should not be used directly; they are used to implement |
| * the 6 functions (copy_{to,from}_user(), __copy_{to,from}_user_inatomic()) |
| * that are used instead. Out of those, __... ones are inlined. Plain |
| * copy_{to,from}_user() might or might not be inlined. If you want them |
| * inlined, have asm/uaccess.h define INLINE_COPY_{TO,FROM}_USER. |
| * |
| * NOTE: only copy_from_user() zero-pads the destination in case of short copy. |
| * Neither __copy_from_user() nor __copy_from_user_inatomic() zero anything |
| * at all; their callers absolutely must check the return value. |
| * |
| * Biarch ones should also provide raw_copy_in_user() - similar to the above, |
| * but both source and destination are __user pointers (affected by set_fs() |
| * as usual) and both source and destination can trigger faults. |
| */ |
| |
| static __always_inline unsigned long |
| __copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) |
| { |
| kasan_check_write(to, n); |
| check_object_size(to, n, false); |
| return raw_copy_from_user(to, from, n); |
| } |
| |
| static __always_inline unsigned long |
| __copy_from_user(void *to, const void __user *from, unsigned long n) |
| { |
| might_fault(); |
| kasan_check_write(to, n); |
| check_object_size(to, n, false); |
| return raw_copy_from_user(to, from, n); |
| } |
| |
| /** |
| * __copy_to_user_inatomic: - Copy a block of data into user space, with less checking. |
| * @to: Destination address, in user space. |
| * @from: Source address, in kernel space. |
| * @n: Number of bytes to copy. |
| * |
| * Context: User context only. |
| * |
| * Copy data from kernel space to user space. Caller must check |
| * the specified block with access_ok() before calling this function. |
| * The caller should also make sure he pins the user space address |
| * so that we don't result in page fault and sleep. |
| */ |
| static __always_inline unsigned long |
| __copy_to_user_inatomic(void __user *to, const void *from, unsigned long n) |
| { |
| kasan_check_read(from, n); |
| check_object_size(from, n, true); |
| return raw_copy_to_user(to, from, n); |
| } |
| |
| static __always_inline unsigned long |
| __copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| might_fault(); |
| kasan_check_read(from, n); |
| check_object_size(from, n, true); |
| return raw_copy_to_user(to, from, n); |
| } |
| |
| #ifdef INLINE_COPY_FROM_USER |
| static inline unsigned long |
| _copy_from_user(void *to, const void __user *from, unsigned long n) |
| { |
| unsigned long res = n; |
| might_fault(); |
| if (likely(access_ok(from, n))) { |
| kasan_check_write(to, n); |
| res = raw_copy_from_user(to, from, n); |
| } |
| if (unlikely(res)) |
| memset(to + (n - res), 0, res); |
| return res; |
| } |
| #else |
| extern unsigned long |
| _copy_from_user(void *, const void __user *, unsigned long); |
| #endif |
| |
| #ifdef INLINE_COPY_TO_USER |
| static inline unsigned long |
| _copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| might_fault(); |
| if (access_ok(to, n)) { |
| kasan_check_read(from, n); |
| n = raw_copy_to_user(to, from, n); |
| } |
| return n; |
| } |
| #else |
| extern unsigned long |
| _copy_to_user(void __user *, const void *, unsigned long); |
| #endif |
| |
| static __always_inline unsigned long __must_check |
| copy_from_user(void *to, const void __user *from, unsigned long n) |
| { |
| if (likely(check_copy_size(to, n, false))) |
| n = _copy_from_user(to, from, n); |
| return n; |
| } |
| |
| static __always_inline unsigned long __must_check |
| copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| if (likely(check_copy_size(from, n, true))) |
| n = _copy_to_user(to, from, n); |
| return n; |
| } |
| #ifdef CONFIG_COMPAT |
| static __always_inline unsigned long __must_check |
| copy_in_user(void __user *to, const void __user *from, unsigned long n) |
| { |
| might_fault(); |
| if (access_ok(to, n) && access_ok(from, n)) |
| n = raw_copy_in_user(to, from, n); |
| return n; |
| } |
| #endif |
| |
| static __always_inline void pagefault_disabled_inc(void) |
| { |
| current->pagefault_disabled++; |
| } |
| |
| static __always_inline void pagefault_disabled_dec(void) |
| { |
| current->pagefault_disabled--; |
| } |
| |
| /* |
| * These routines enable/disable the pagefault handler. If disabled, it will |
| * not take any locks and go straight to the fixup table. |
| * |
| * User access methods will not sleep when called from a pagefault_disabled() |
| * environment. |
| */ |
| static inline void pagefault_disable(void) |
| { |
| pagefault_disabled_inc(); |
| /* |
| * make sure to have issued the store before a pagefault |
| * can hit. |
| */ |
| barrier(); |
| } |
| |
| static inline void pagefault_enable(void) |
| { |
| /* |
| * make sure to issue those last loads/stores before enabling |
| * the pagefault handler again. |
| */ |
| barrier(); |
| pagefault_disabled_dec(); |
| } |
| |
| /* |
| * Is the pagefault handler disabled? If so, user access methods will not sleep. |
| */ |
| static inline bool pagefault_disabled(void) |
| { |
| return current->pagefault_disabled != 0; |
| } |
| |
| /* |
| * The pagefault handler is in general disabled by pagefault_disable() or |
| * when in irq context (via in_atomic()). |
| * |
| * This function should only be used by the fault handlers. Other users should |
| * stick to pagefault_disabled(). |
| * Please NEVER use preempt_disable() to disable the fault handler. With |
| * !CONFIG_PREEMPT_COUNT, this is like a NOP. So the handler won't be disabled. |
| * in_atomic() will report different values based on !CONFIG_PREEMPT_COUNT. |
| */ |
| #define faulthandler_disabled() (pagefault_disabled() || in_atomic()) |
| |
| #ifndef ARCH_HAS_NOCACHE_UACCESS |
| |
| static inline unsigned long __copy_from_user_inatomic_nocache(void *to, |
| const void __user *from, unsigned long n) |
| { |
| return __copy_from_user_inatomic(to, from, n); |
| } |
| |
| #endif /* ARCH_HAS_NOCACHE_UACCESS */ |
| |
| /* |
| * probe_kernel_read(): safely attempt to read from a location |
| * @dst: pointer to the buffer that shall take the data |
| * @src: address to read from |
| * @size: size of the data chunk |
| * |
| * Safely read from address @src to the buffer at @dst. If a kernel fault |
| * happens, handle that and return -EFAULT. |
| */ |
| extern long probe_kernel_read(void *dst, const void *src, size_t size); |
| extern long __probe_kernel_read(void *dst, const void *src, size_t size); |
| |
| /* |
| * probe_user_read(): safely attempt to read from a location in user space |
| * @dst: pointer to the buffer that shall take the data |
| * @src: address to read from |
| * @size: size of the data chunk |
| * |
| * Safely read from address @src to the buffer at @dst. If a kernel fault |
| * happens, handle that and return -EFAULT. |
| */ |
| extern long probe_user_read(void *dst, const void __user *src, size_t size); |
| extern long __probe_user_read(void *dst, const void __user *src, size_t size); |
| |
| /* |
| * probe_kernel_write(): safely attempt to write to a location |
| * @dst: address to write to |
| * @src: pointer to the data that shall be written |
| * @size: size of the data chunk |
| * |
| * Safely write to address @dst from the buffer at @src. If a kernel fault |
| * happens, handle that and return -EFAULT. |
| */ |
| extern long notrace probe_kernel_write(void *dst, const void *src, size_t size); |
| extern long notrace __probe_kernel_write(void *dst, const void *src, size_t size); |
| |
| extern long strncpy_from_unsafe(char *dst, const void *unsafe_addr, long count); |
| extern long strncpy_from_unsafe_user(char *dst, const void __user *unsafe_addr, |
| long count); |
| extern long strnlen_unsafe_user(const void __user *unsafe_addr, long count); |
| |
| /** |
| * probe_kernel_address(): safely attempt to read from a location |
| * @addr: address to read from |
| * @retval: read into this variable |
| * |
| * Returns 0 on success, or -EFAULT. |
| */ |
| #define probe_kernel_address(addr, retval) \ |
| probe_kernel_read(&retval, addr, sizeof(retval)) |
| |
| #ifndef user_access_begin |
| #define user_access_begin(ptr,len) access_ok(ptr, len) |
| #define user_access_end() do { } while (0) |
| #define unsafe_get_user(x, ptr, err) do { if (unlikely(__get_user(x, ptr))) goto err; } while (0) |
| #define unsafe_put_user(x, ptr, err) do { if (unlikely(__put_user(x, ptr))) goto err; } while (0) |
| static inline unsigned long user_access_save(void) { return 0UL; } |
| static inline void user_access_restore(unsigned long flags) { } |
| #endif |
| |
| #ifdef CONFIG_HARDENED_USERCOPY |
| void usercopy_warn(const char *name, const char *detail, bool to_user, |
| unsigned long offset, unsigned long len); |
| void __noreturn usercopy_abort(const char *name, const char *detail, |
| bool to_user, unsigned long offset, |
| unsigned long len); |
| #endif |
| |
| #endif /* __LINUX_UACCESS_H__ */ |