| Analog Devices ADAU1701 | |
| Required properties: | |
| - compatible: Should contain "adi,adau1701" | |
| - reg: The i2c address. Value depends on the state of ADDR0 | |
| and ADDR1, as wired in hardware. | |
| Optional properties: | |
| - reset-gpio: A GPIO spec to define which pin is connected to the | |
| chip's !RESET pin. If specified, the driver will | |
| assert a hardware reset at probe time. | |
| Examples: | |
| i2c_bus { | |
| adau1701@34 { | |
| compatible = "adi,adau1701"; | |
| reg = <0x34>; | |
| reset-gpio = <&gpio 23 0>; | |
| }; | |
| }; |