| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Copyright 2015-2017 Google, Inc |
| */ |
| |
| #ifndef __LINUX_USB_TCPM_H |
| #define __LINUX_USB_TCPM_H |
| |
| #include <linux/bitops.h> |
| #include <linux/usb/typec.h> |
| #include "pd.h" |
| |
| enum typec_cc_status { |
| TYPEC_CC_OPEN, |
| TYPEC_CC_RA, |
| TYPEC_CC_RD, |
| TYPEC_CC_RP_DEF, |
| TYPEC_CC_RP_1_5, |
| TYPEC_CC_RP_3_0, |
| }; |
| |
| enum typec_cc_polarity { |
| TYPEC_POLARITY_CC1, |
| TYPEC_POLARITY_CC2, |
| }; |
| |
| /* Time to wait for TCPC to complete transmit */ |
| #define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */ |
| #define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10) |
| #define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10) |
| |
| enum tcpm_transmit_status { |
| TCPC_TX_SUCCESS = 0, |
| TCPC_TX_DISCARDED = 1, |
| TCPC_TX_FAILED = 2, |
| }; |
| |
| enum tcpm_transmit_type { |
| TCPC_TX_SOP = 0, |
| TCPC_TX_SOP_PRIME = 1, |
| TCPC_TX_SOP_PRIME_PRIME = 2, |
| TCPC_TX_SOP_DEBUG_PRIME = 3, |
| TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4, |
| TCPC_TX_HARD_RESET = 5, |
| TCPC_TX_CABLE_RESET = 6, |
| TCPC_TX_BIST_MODE_2 = 7 |
| }; |
| |
| /* Mux state attributes */ |
| #define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */ |
| #define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */ |
| #define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */ |
| |
| /** |
| * struct tcpc_dev - Port configuration and callback functions |
| * @fwnode: Pointer to port fwnode |
| * @get_vbus: Called to read current VBUS state |
| * @get_current_limit: |
| * Optional; called by the tcpm core when configured as a snk |
| * and cc=Rp-def. This allows the tcpm to provide a fallback |
| * current-limit detection method for the cc=Rp-def case. |
| * For example, some tcpcs may include BC1.2 charger detection |
| * and use that in this case. |
| * @set_cc: Called to set value of CC pins |
| * @get_cc: Called to read current CC pin values |
| * @set_polarity: |
| * Called to set polarity |
| * @set_vconn: Called to enable or disable VCONN |
| * @set_vbus: Called to enable or disable VBUS |
| * @set_current_limit: |
| * Optional; called to set current limit as negotiated |
| * with partner. |
| * @set_pd_rx: Called to enable or disable reception of PD messages |
| * @set_roles: Called to set power and data roles |
| * @start_toggling: |
| * Optional; if supported by hardware, called to start dual-role |
| * toggling or single-role connection detection. Toggling stops |
| * automatically if a connection is established. |
| * @try_role: Optional; called to set a preferred role |
| * @pd_transmit:Called to transmit PD message |
| * @set_bist_data: Turn on/off bist data mode for compliance testing |
| * @enable_frs: |
| * Optional; Called to enable/disable PD 3.0 fast role swap. |
| * Enabling frs is accessory dependent as not all PD3.0 |
| * accessories support fast role swap. |
| */ |
| struct tcpc_dev { |
| struct fwnode_handle *fwnode; |
| |
| int (*init)(struct tcpc_dev *dev); |
| int (*get_vbus)(struct tcpc_dev *dev); |
| int (*get_current_limit)(struct tcpc_dev *dev); |
| int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc); |
| int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1, |
| enum typec_cc_status *cc2); |
| int (*set_polarity)(struct tcpc_dev *dev, |
| enum typec_cc_polarity polarity); |
| int (*set_vconn)(struct tcpc_dev *dev, bool on); |
| int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge); |
| int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv); |
| int (*set_pd_rx)(struct tcpc_dev *dev, bool on); |
| int (*set_roles)(struct tcpc_dev *dev, bool attached, |
| enum typec_role role, enum typec_data_role data); |
| int (*start_toggling)(struct tcpc_dev *dev, |
| enum typec_port_type port_type, |
| enum typec_cc_status cc); |
| int (*try_role)(struct tcpc_dev *dev, int role); |
| int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, |
| const struct pd_message *msg); |
| int (*set_bist_data)(struct tcpc_dev *dev, bool on); |
| int (*enable_frs)(struct tcpc_dev *dev, bool enable); |
| }; |
| |
| struct tcpm_port; |
| |
| struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc); |
| void tcpm_unregister_port(struct tcpm_port *port); |
| |
| void tcpm_vbus_change(struct tcpm_port *port); |
| void tcpm_cc_change(struct tcpm_port *port); |
| void tcpm_sink_frs(struct tcpm_port *port); |
| void tcpm_sourcing_vbus(struct tcpm_port *port); |
| void tcpm_pd_receive(struct tcpm_port *port, |
| const struct pd_message *msg); |
| void tcpm_pd_transmit_complete(struct tcpm_port *port, |
| enum tcpm_transmit_status status); |
| void tcpm_pd_hard_reset(struct tcpm_port *port); |
| void tcpm_tcpc_reset(struct tcpm_port *port); |
| |
| #endif /* __LINUX_USB_TCPM_H */ |