| Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel |
| |
| Required properties: |
| - compatible: should be "koe,tx14d24vm1bpa" |
| - backlight: phandle of the backlight device attached to the panel |
| - power-supply: single regulator to provide the supply voltage |
| |
| Required nodes: |
| - port: Parallel port mapping to connect this display |
| |
| This panel needs single power supply voltage. Its backlight is conntrolled |
| via PWM signal. |
| |
| Example: |
| -------- |
| |
| Example device-tree definition when connected to iMX53 based board |
| |
| lcd_panel: lcd-panel { |
| compatible = "koe,tx14d24vm1bpa"; |
| backlight = <&backlight_lcd>; |
| power-supply = <®_3v3>; |
| |
| port { |
| lcd_panel_in: endpoint { |
| remote-endpoint = <&lcd_display_out>; |
| }; |
| }; |
| }; |
| |
| Then one needs to extend the dispX node: |
| |
| lcd_display: disp1 { |
| |
| port@1 { |
| reg = <1>; |
| |
| lcd_display_out: endpoint { |
| remote-endpoint = <&lcd_panel_in>; |
| }; |
| }; |
| }; |