* ST UVIS25 uv sensor | |
Required properties: | |
- compatible: should be "st,uvis25" | |
- reg: i2c address of the sensor / spi cs line | |
Optional properties: | |
- interrupt-parent: should be the phandle for the interrupt controller | |
- interrupts: interrupt mapping for IRQ. It should be configured with | |
flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or | |
IRQ_TYPE_EDGE_FALLING. | |
Refer to interrupt-controller/interrupts.txt for generic interrupt | |
client node bindings. | |
Example: | |
uvis25@47 { | |
compatible = "st,uvis25"; | |
reg = <0x47>; | |
interrupt-parent = <&gpio0>; | |
interrupts = <0 IRQ_TYPE_EDGE_RISING>; | |
}; |