| /* |
| Driver for Zarlink VP310/MT312 Satellite Channel Decoder |
| |
| Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| References: |
| http://products.zarlink.com/product_profiles/MT312.htm |
| http://products.zarlink.com/product_profiles/SL1935.htm |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| |
| #include "dvb_frontend.h" |
| #include "mt312_priv.h" |
| #include "mt312.h" |
| |
| |
| struct mt312_state { |
| struct i2c_adapter* i2c; |
| struct dvb_frontend_ops ops; |
| /* configuration settings */ |
| const struct mt312_config* config; |
| struct dvb_frontend frontend; |
| |
| u8 id; |
| u8 frequency; |
| }; |
| |
| static int debug; |
| #define dprintk(args...) \ |
| do { \ |
| if (debug) printk(KERN_DEBUG "mt312: " args); \ |
| } while (0) |
| |
| #define MT312_SYS_CLK 90000000UL /* 90 MHz */ |
| #define MT312_LPOWER_SYS_CLK 60000000UL /* 60 MHz */ |
| #define MT312_PLL_CLK 10000000UL /* 10 MHz */ |
| |
| static int mt312_read(struct mt312_state* state, const enum mt312_reg_addr reg, |
| void *buf, const size_t count) |
| { |
| int ret; |
| struct i2c_msg msg[2]; |
| u8 regbuf[1] = { reg }; |
| |
| msg[0].addr = state->config->demod_address; |
| msg[0].flags = 0; |
| msg[0].buf = regbuf; |
| msg[0].len = 1; |
| msg[1].addr = state->config->demod_address; |
| msg[1].flags = I2C_M_RD; |
| msg[1].buf = buf; |
| msg[1].len = count; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) { |
| printk(KERN_ERR "%s: ret == %d\n", __FUNCTION__, ret); |
| return -EREMOTEIO; |
| } |
| |
| if(debug) { |
| int i; |
| dprintk("R(%d):", reg & 0x7f); |
| for (i = 0; i < count; i++) |
| printk(" %02x", ((const u8 *) buf)[i]); |
| printk("\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int mt312_write(struct mt312_state* state, const enum mt312_reg_addr reg, |
| const void *src, const size_t count) |
| { |
| int ret; |
| u8 buf[count + 1]; |
| struct i2c_msg msg; |
| |
| if(debug) { |
| int i; |
| dprintk("W(%d):", reg & 0x7f); |
| for (i = 0; i < count; i++) |
| printk(" %02x", ((const u8 *) src)[i]); |
| printk("\n"); |
| } |
| |
| buf[0] = reg; |
| memcpy(&buf[1], src, count); |
| |
| msg.addr = state->config->demod_address; |
| msg.flags = 0; |
| msg.buf = buf; |
| msg.len = count + 1; |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) { |
| dprintk("%s: ret == %d\n", __FUNCTION__, ret); |
| return -EREMOTEIO; |
| } |
| |
| return 0; |
| } |
| |
| static inline int mt312_readreg(struct mt312_state* state, |
| const enum mt312_reg_addr reg, u8 *val) |
| { |
| return mt312_read(state, reg, val, 1); |
| } |
| |
| static inline int mt312_writereg(struct mt312_state* state, |
| const enum mt312_reg_addr reg, const u8 val) |
| { |
| return mt312_write(state, reg, &val, 1); |
| } |
| |
| static inline u32 mt312_div(u32 a, u32 b) |
| { |
| return (a + (b / 2)) / b; |
| } |
| |
| static int mt312_reset(struct mt312_state* state, const u8 full) |
| { |
| return mt312_writereg(state, RESET, full ? 0x80 : 0x40); |
| } |
| |
| static int mt312_get_inversion(struct mt312_state* state, |
| fe_spectral_inversion_t *i) |
| { |
| int ret; |
| u8 vit_mode; |
| |
| if ((ret = mt312_readreg(state, VIT_MODE, &vit_mode)) < 0) |
| return ret; |
| |
| if (vit_mode & 0x80) /* auto inversion was used */ |
| *i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF; |
| |
| return 0; |
| } |
| |
| static int mt312_get_symbol_rate(struct mt312_state* state, u32 *sr) |
| { |
| int ret; |
| u8 sym_rate_h; |
| u8 dec_ratio; |
| u16 sym_rat_op; |
| u16 monitor; |
| u8 buf[2]; |
| |
| if ((ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h)) < 0) |
| return ret; |
| |
| if (sym_rate_h & 0x80) { /* symbol rate search was used */ |
| if ((ret = mt312_writereg(state, MON_CTRL, 0x03)) < 0) |
| return ret; |
| |
| if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0) |
| return ret; |
| |
| monitor = (buf[0] << 8) | buf[1]; |
| |
| dprintk(KERN_DEBUG "sr(auto) = %u\n", |
| mt312_div(monitor * 15625, 4)); |
| } else { |
| if ((ret = mt312_writereg(state, MON_CTRL, 0x05)) < 0) |
| return ret; |
| |
| if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0) |
| return ret; |
| |
| dec_ratio = ((buf[0] >> 5) & 0x07) * 32; |
| |
| if ((ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf))) < 0) |
| return ret; |
| |
| sym_rat_op = (buf[0] << 8) | buf[1]; |
| |
| dprintk(KERN_DEBUG "sym_rat_op=%d dec_ratio=%d\n", |
| sym_rat_op, dec_ratio); |
| dprintk(KERN_DEBUG "*sr(manual) = %lu\n", |
| (((MT312_PLL_CLK * 8192) / (sym_rat_op + 8192)) * |
| 2) - dec_ratio); |
| } |
| |
| return 0; |
| } |
| |
| static int mt312_get_code_rate(struct mt312_state* state, fe_code_rate_t *cr) |
| { |
| const fe_code_rate_t fec_tab[8] = |
| { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8, |
| FEC_AUTO, FEC_AUTO }; |
| |
| int ret; |
| u8 fec_status; |
| |
| if ((ret = mt312_readreg(state, FEC_STATUS, &fec_status)) < 0) |
| return ret; |
| |
| *cr = fec_tab[(fec_status >> 4) & 0x07]; |
| |
| return 0; |
| } |
| |
| static int mt312_initfe(struct dvb_frontend* fe) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[2]; |
| |
| /* wake up */ |
| if ((ret = mt312_writereg(state, CONFIG, (state->frequency == 60 ? 0x88 : 0x8c))) < 0) |
| return ret; |
| |
| /* wait at least 150 usec */ |
| udelay(150); |
| |
| /* full reset */ |
| if ((ret = mt312_reset(state, 1)) < 0) |
| return ret; |
| |
| // Per datasheet, write correct values. 09/28/03 ACCJr. |
| // If we don't do this, we won't get FE_HAS_VITERBI in the VP310. |
| { |
| u8 buf_def[8]={0x14, 0x12, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00}; |
| |
| if ((ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def))) < 0) |
| return ret; |
| } |
| |
| /* SYS_CLK */ |
| buf[0] = mt312_div((state->frequency == 60 ? MT312_LPOWER_SYS_CLK : MT312_SYS_CLK) * 2, 1000000); |
| |
| /* DISEQC_RATIO */ |
| buf[1] = mt312_div(MT312_PLL_CLK, 15000 * 4); |
| |
| if ((ret = mt312_write(state, SYS_CLK, buf, sizeof(buf))) < 0) |
| return ret; |
| |
| if ((ret = mt312_writereg(state, SNR_THS_HIGH, 0x32)) < 0) |
| return ret; |
| |
| if ((ret = mt312_writereg(state, OP_CTRL, 0x53)) < 0) |
| return ret; |
| |
| /* TS_SW_LIM */ |
| buf[0] = 0x8c; |
| buf[1] = 0x98; |
| |
| if ((ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf))) < 0) |
| return ret; |
| |
| if ((ret = mt312_writereg(state, CS_SW_LIM, 0x69)) < 0) |
| return ret; |
| |
| if (state->config->pll_init) { |
| mt312_writereg(state, GPP_CTRL, 0x40); |
| state->config->pll_init(fe); |
| mt312_writereg(state, GPP_CTRL, 0x00); |
| } |
| |
| return 0; |
| } |
| |
| static int mt312_send_master_cmd(struct dvb_frontend* fe, |
| struct dvb_diseqc_master_cmd *c) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 diseqc_mode; |
| |
| if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg))) |
| return -EINVAL; |
| |
| if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0) |
| return ret; |
| |
| if ((ret = |
| mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len)) < 0) |
| return ret; |
| |
| if ((ret = |
| mt312_writereg(state, DISEQC_MODE, |
| (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3) |
| | 0x04)) < 0) |
| return ret; |
| |
| /* set DISEQC_MODE[2:0] to zero if a return message is expected */ |
| if (c->msg[0] & 0x02) |
| if ((ret = |
| mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40))) < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| const u8 mini_tab[2] = { 0x02, 0x03 }; |
| |
| int ret; |
| u8 diseqc_mode; |
| |
| if (c > SEC_MINI_B) |
| return -EINVAL; |
| |
| if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0) |
| return ret; |
| |
| if ((ret = |
| mt312_writereg(state, DISEQC_MODE, |
| (diseqc_mode & 0x40) | mini_tab[c])) < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| const u8 tone_tab[2] = { 0x01, 0x00 }; |
| |
| int ret; |
| u8 diseqc_mode; |
| |
| if (t > SEC_TONE_OFF) |
| return -EINVAL; |
| |
| if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0) |
| return ret; |
| |
| if ((ret = |
| mt312_writereg(state, DISEQC_MODE, |
| (diseqc_mode & 0x40) | tone_tab[t])) < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| const u8 volt_tab[3] = { 0x00, 0x40, 0x00 }; |
| |
| if (v > SEC_VOLTAGE_OFF) |
| return -EINVAL; |
| |
| return mt312_writereg(state, DISEQC_MODE, volt_tab[v]); |
| } |
| |
| static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 status[3]; |
| |
| *s = 0; |
| |
| if ((ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status))) < 0) |
| return ret; |
| |
| dprintk(KERN_DEBUG "QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]); |
| |
| if (status[0] & 0xc0) |
| *s |= FE_HAS_SIGNAL; /* signal noise ratio */ |
| if (status[0] & 0x04) |
| *s |= FE_HAS_CARRIER; /* qpsk carrier lock */ |
| if (status[2] & 0x02) |
| *s |= FE_HAS_VITERBI; /* viterbi lock */ |
| if (status[2] & 0x04) |
| *s |= FE_HAS_SYNC; /* byte align lock */ |
| if (status[0] & 0x01) |
| *s |= FE_HAS_LOCK; /* qpsk lock */ |
| |
| return 0; |
| } |
| |
| static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[3]; |
| |
| if ((ret = mt312_read(state, RS_BERCNT_H, buf, 3)) < 0) |
| return ret; |
| |
| *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64; |
| |
| return 0; |
| } |
| |
| static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_strength) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[3]; |
| u16 agc; |
| s16 err_db; |
| |
| if ((ret = mt312_read(state, AGC_H, buf, sizeof(buf))) < 0) |
| return ret; |
| |
| agc = (buf[0] << 6) | (buf[1] >> 2); |
| err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6; |
| |
| *signal_strength = agc; |
| |
| dprintk(KERN_DEBUG "agc=%08x err_db=%hd\n", agc, err_db); |
| |
| return 0; |
| } |
| |
| static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[2]; |
| |
| if ((ret = mt312_read(state, M_SNR_H, &buf, sizeof(buf))) < 0) |
| return ret; |
| |
| *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1); |
| |
| return 0; |
| } |
| |
| static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[2]; |
| |
| if ((ret = mt312_read(state, RS_UBC_H, &buf, sizeof(buf))) < 0) |
| return ret; |
| |
| *ubc = (buf[0] << 8) | buf[1]; |
| |
| return 0; |
| } |
| |
| static int mt312_set_frontend(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *p) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[5], config_val; |
| u16 sr; |
| |
| const u8 fec_tab[10] = |
| { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f }; |
| const u8 inv_tab[3] = { 0x00, 0x40, 0x80 }; |
| |
| dprintk("%s: Freq %d\n", __FUNCTION__, p->frequency); |
| |
| if ((p->frequency < fe->ops->info.frequency_min) |
| || (p->frequency > fe->ops->info.frequency_max)) |
| return -EINVAL; |
| |
| if ((p->inversion < INVERSION_OFF) |
| || (p->inversion > INVERSION_ON)) |
| return -EINVAL; |
| |
| if ((p->u.qpsk.symbol_rate < fe->ops->info.symbol_rate_min) |
| || (p->u.qpsk.symbol_rate > fe->ops->info.symbol_rate_max)) |
| return -EINVAL; |
| |
| if ((p->u.qpsk.fec_inner < FEC_NONE) |
| || (p->u.qpsk.fec_inner > FEC_AUTO)) |
| return -EINVAL; |
| |
| if ((p->u.qpsk.fec_inner == FEC_4_5) |
| || (p->u.qpsk.fec_inner == FEC_8_9)) |
| return -EINVAL; |
| |
| switch (state->id) { |
| case ID_VP310: |
| // For now we will do this only for the VP310. |
| // It should be better for the mt312 as well, but tunning will be slower. ACCJr 09/29/03 |
| if ((ret = mt312_readreg(state, CONFIG, &config_val) < 0)) |
| return ret; |
| if (p->u.qpsk.symbol_rate >= 30000000) //Note that 30MS/s should use 90MHz |
| { |
| if ((config_val & 0x0c) == 0x08) { //We are running 60MHz |
| state->frequency = 90; |
| if ((ret = mt312_initfe(fe)) < 0) |
| return ret; |
| } |
| } |
| else |
| { |
| if ((config_val & 0x0c) == 0x0C) { //We are running 90MHz |
| state->frequency = 60; |
| if ((ret = mt312_initfe(fe)) < 0) |
| return ret; |
| } |
| } |
| break; |
| |
| case ID_MT312: |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| mt312_writereg(state, GPP_CTRL, 0x40); |
| state->config->pll_set(fe, p); |
| mt312_writereg(state, GPP_CTRL, 0x00); |
| |
| /* sr = (u16)(sr * 256.0 / 1000000.0) */ |
| sr = mt312_div(p->u.qpsk.symbol_rate * 4, 15625); |
| |
| /* SYM_RATE */ |
| buf[0] = (sr >> 8) & 0x3f; |
| buf[1] = (sr >> 0) & 0xff; |
| |
| /* VIT_MODE */ |
| buf[2] = inv_tab[p->inversion] | fec_tab[p->u.qpsk.fec_inner]; |
| |
| /* QPSK_CTRL */ |
| buf[3] = 0x40; /* swap I and Q before QPSK demodulation */ |
| |
| if (p->u.qpsk.symbol_rate < 10000000) |
| buf[3] |= 0x04; /* use afc mode */ |
| |
| /* GO */ |
| buf[4] = 0x01; |
| |
| if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0) |
| return ret; |
| |
| mt312_reset(state, 0); |
| |
| return 0; |
| } |
| |
| static int mt312_get_frontend(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *p) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| |
| if ((ret = mt312_get_inversion(state, &p->inversion)) < 0) |
| return ret; |
| |
| if ((ret = mt312_get_symbol_rate(state, &p->u.qpsk.symbol_rate)) < 0) |
| return ret; |
| |
| if ((ret = mt312_get_code_rate(state, &p->u.qpsk.fec_inner)) < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mt312_sleep(struct dvb_frontend* fe) |
| { |
| struct mt312_state *state = fe->demodulator_priv; |
| int ret; |
| u8 config; |
| |
| /* reset all registers to defaults */ |
| if ((ret = mt312_reset(state, 1)) < 0) |
| return ret; |
| |
| if ((ret = mt312_readreg(state, CONFIG, &config)) < 0) |
| return ret; |
| |
| /* enter standby */ |
| if ((ret = mt312_writereg(state, CONFIG, config & 0x7f)) < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mt312_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) |
| { |
| fesettings->min_delay_ms = 50; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| return 0; |
| } |
| |
| static void mt312_release(struct dvb_frontend* fe) |
| { |
| struct mt312_state* state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops vp310_mt312_ops; |
| |
| struct dvb_frontend* vp310_attach(const struct mt312_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct mt312_state* state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops)); |
| strcpy(state->ops.info.name, "Zarlink VP310 DVB-S"); |
| |
| /* check if the demod is there */ |
| if (mt312_readreg(state, ID, &state->id) < 0) |
| goto error; |
| if (state->id != ID_VP310) { |
| goto error; |
| } |
| |
| /* create dvb_frontend */ |
| state->frequency = 90; |
| state->frontend.ops = &state->ops; |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| struct dvb_frontend* mt312_attach(const struct mt312_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct mt312_state* state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops)); |
| strcpy(state->ops.info.name, "Zarlink MT312 DVB-S"); |
| |
| /* check if the demod is there */ |
| if (mt312_readreg(state, ID, &state->id) < 0) |
| goto error; |
| if (state->id != ID_MT312) { |
| goto error; |
| } |
| |
| /* create dvb_frontend */ |
| state->frequency = 60; |
| state->frontend.ops = &state->ops; |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| if (state) |
| kfree(state); |
| return NULL; |
| } |
| |
| static struct dvb_frontend_ops vp310_mt312_ops = { |
| |
| .info = { |
| .name = "Zarlink ???? DVB-S", |
| .type = FE_QPSK, |
| .frequency_min = 950000, |
| .frequency_max = 2150000, |
| .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128, |
| .symbol_rate_min = MT312_SYS_CLK / 128, |
| .symbol_rate_max = MT312_SYS_CLK / 2, |
| .caps = |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS | |
| FE_CAN_RECOVER |
| }, |
| |
| .release = mt312_release, |
| |
| .init = mt312_initfe, |
| .sleep = mt312_sleep, |
| |
| .set_frontend = mt312_set_frontend, |
| .get_frontend = mt312_get_frontend, |
| .get_tune_settings = mt312_get_tune_settings, |
| |
| .read_status = mt312_read_status, |
| .read_ber = mt312_read_ber, |
| .read_signal_strength = mt312_read_signal_strength, |
| .read_snr = mt312_read_snr, |
| .read_ucblocks = mt312_read_ucblocks, |
| |
| .diseqc_send_master_cmd = mt312_send_master_cmd, |
| .diseqc_send_burst = mt312_send_burst, |
| .set_tone = mt312_set_tone, |
| .set_voltage = mt312_set_voltage, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver"); |
| MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(mt312_attach); |
| EXPORT_SYMBOL(vp310_attach); |