blob: 7f0d77066df3e2e5fc577b544562b68f88098e7e [file] [log] [blame]
Paul Crowleyf71ace32016-06-02 11:01:19 -07001/*
2 * Copyright (C) 2016 The Android Open Source Project
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 * http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16
17#include "EncryptInplace.h"
18
Paul Crowleyf71ace32016-06-02 11:01:19 -070019#include <ext4_utils/ext4.h>
20#include <ext4_utils/ext4_utils.h>
21#include <f2fs_sparseblock.h>
Paul Crowley14c8c072018-09-18 13:30:21 -070022#include <fcntl.h>
23#include <inttypes.h>
24#include <stdint.h>
25#include <stdio.h>
26#include <sys/stat.h>
27#include <sys/types.h>
28#include <time.h>
Paul Crowleyf71ace32016-06-02 11:01:19 -070029
30#include <algorithm>
31
Paul Crowley772cc852018-02-01 09:53:27 -080032#include <android-base/logging.h>
33#include <android-base/properties.h>
Paul Crowleyf71ace32016-06-02 11:01:19 -070034
35// HORRIBLE HACK, FIXME
36#include "cryptfs.h"
37
38// FIXME horrible cut-and-paste code
Paul Crowley14c8c072018-09-18 13:30:21 -070039static inline int unix_read(int fd, void* buff, int len) {
Paul Crowleyf71ace32016-06-02 11:01:19 -070040 return TEMP_FAILURE_RETRY(read(fd, buff, len));
41}
42
Paul Crowley14c8c072018-09-18 13:30:21 -070043static inline int unix_write(int fd, const void* buff, int len) {
Paul Crowleyf71ace32016-06-02 11:01:19 -070044 return TEMP_FAILURE_RETRY(write(fd, buff, len));
45}
46
47#define CRYPT_SECTORS_PER_BUFSIZE (CRYPT_INPLACE_BUFSIZE / CRYPT_SECTOR_SIZE)
48
49/* aligned 32K writes tends to make flash happy.
50 * SD card association recommends it.
51 */
52#ifndef CONFIG_HW_DISK_ENCRYPTION
53#define BLOCKS_AT_A_TIME 8
54#else
55#define BLOCKS_AT_A_TIME 1024
56#endif
57
Paul Crowley14c8c072018-09-18 13:30:21 -070058struct encryptGroupsData {
Paul Crowleyf71ace32016-06-02 11:01:19 -070059 int realfd;
60 int cryptofd;
61 off64_t numblocks;
62 off64_t one_pct, cur_pct, new_pct;
63 off64_t blocks_already_done, tot_numblocks;
64 off64_t used_blocks_already_done, tot_used_blocks;
Paul Crowley14c8c072018-09-18 13:30:21 -070065 char *real_blkdev, *crypto_blkdev;
Paul Crowleyf71ace32016-06-02 11:01:19 -070066 int count;
67 off64_t offset;
68 char* buffer;
69 off64_t last_written_sector;
70 int completed;
71 time_t time_started;
72 int remaining_time;
Paul Crowley0fd26262018-01-30 09:48:19 -080073 bool set_progress_properties;
Paul Crowleyf71ace32016-06-02 11:01:19 -070074};
75
Paul Crowley14c8c072018-09-18 13:30:21 -070076static void update_progress(struct encryptGroupsData* data, int is_used) {
Paul Crowleyf71ace32016-06-02 11:01:19 -070077 data->blocks_already_done++;
78
79 if (is_used) {
80 data->used_blocks_already_done++;
81 }
82 if (data->tot_used_blocks) {
83 data->new_pct = data->used_blocks_already_done / data->one_pct;
84 } else {
85 data->new_pct = data->blocks_already_done / data->one_pct;
86 }
87
Paul Crowley0fd26262018-01-30 09:48:19 -080088 if (!data->set_progress_properties) return;
89
Paul Crowleyf71ace32016-06-02 11:01:19 -070090 if (data->new_pct > data->cur_pct) {
91 char buf[8];
92 data->cur_pct = data->new_pct;
93 snprintf(buf, sizeof(buf), "%" PRId64, data->cur_pct);
Paul Crowley772cc852018-02-01 09:53:27 -080094 android::base::SetProperty("vold.encrypt_progress", buf);
Paul Crowleyf71ace32016-06-02 11:01:19 -070095 }
96
97 if (data->cur_pct >= 5) {
98 struct timespec time_now;
99 if (clock_gettime(CLOCK_MONOTONIC, &time_now)) {
Paul Crowley772cc852018-02-01 09:53:27 -0800100 LOG(WARNING) << "Error getting time";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700101 } else {
102 double elapsed_time = difftime(time_now.tv_sec, data->time_started);
Paul Crowley14c8c072018-09-18 13:30:21 -0700103 off64_t remaining_blocks = data->tot_used_blocks - data->used_blocks_already_done;
104 int remaining_time =
105 (int)(elapsed_time * remaining_blocks / data->used_blocks_already_done);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700106
107 // Change time only if not yet set, lower, or a lot higher for
108 // best user experience
Paul Crowley14c8c072018-09-18 13:30:21 -0700109 if (data->remaining_time == -1 || remaining_time < data->remaining_time ||
110 remaining_time > data->remaining_time + 60) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700111 char buf[8];
112 snprintf(buf, sizeof(buf), "%d", remaining_time);
Paul Crowley772cc852018-02-01 09:53:27 -0800113 android::base::SetProperty("vold.encrypt_time_remaining", buf);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700114 data->remaining_time = remaining_time;
115 }
116 }
117 }
118}
119
Paul Crowley14c8c072018-09-18 13:30:21 -0700120static void log_progress(struct encryptGroupsData const* data, bool completed) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700121 // Precondition - if completed data = 0 else data != 0
122
123 // Track progress so we can skip logging blocks
124 static off64_t offset = -1;
125
126 // Need to close existing 'Encrypting from' log?
127 if (completed || (offset != -1 && data->offset != offset)) {
Paul Crowley772cc852018-02-01 09:53:27 -0800128 LOG(INFO) << "Encrypted to sector " << offset / info.block_size * CRYPT_SECTOR_SIZE;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700129 offset = -1;
130 }
131
132 // Need to start new 'Encrypting from' log?
133 if (!completed && offset != data->offset) {
Paul Crowley772cc852018-02-01 09:53:27 -0800134 LOG(INFO) << "Encrypting from sector " << data->offset / info.block_size * CRYPT_SECTOR_SIZE;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700135 }
136
137 // Update offset
138 if (!completed) {
139 offset = data->offset + (off64_t)data->count * info.block_size;
140 }
141}
142
Paul Crowley14c8c072018-09-18 13:30:21 -0700143static int flush_outstanding_data(struct encryptGroupsData* data) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700144 if (data->count == 0) {
145 return 0;
146 }
147
Paul Crowley772cc852018-02-01 09:53:27 -0800148 LOG(VERBOSE) << "Copying " << data->count << " blocks at offset " << data->offset;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700149
Paul Crowley772cc852018-02-01 09:53:27 -0800150 if (pread64(data->realfd, data->buffer, info.block_size * data->count, data->offset) <= 0) {
151 LOG(ERROR) << "Error reading real_blkdev " << data->real_blkdev << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700152 return -1;
153 }
154
Paul Crowley772cc852018-02-01 09:53:27 -0800155 if (pwrite64(data->cryptofd, data->buffer, info.block_size * data->count, data->offset) <= 0) {
156 LOG(ERROR) << "Error writing crypto_blkdev " << data->crypto_blkdev
157 << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700158 return -1;
159 } else {
Paul Crowley14c8c072018-09-18 13:30:21 -0700160 log_progress(data, false);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700161 }
162
163 data->count = 0;
Paul Crowley14c8c072018-09-18 13:30:21 -0700164 data->last_written_sector =
165 (data->offset + data->count) / info.block_size * CRYPT_SECTOR_SIZE - 1;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700166 return 0;
167}
168
Paul Crowley14c8c072018-09-18 13:30:21 -0700169static int encrypt_groups(struct encryptGroupsData* data) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700170 unsigned int i;
Paul Crowley14c8c072018-09-18 13:30:21 -0700171 u8* block_bitmap = 0;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700172 unsigned int block;
173 off64_t ret;
174 int rc = -1;
175
Paul Crowley14c8c072018-09-18 13:30:21 -0700176 data->buffer = (char*)malloc(info.block_size * BLOCKS_AT_A_TIME);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700177 if (!data->buffer) {
Paul Crowley772cc852018-02-01 09:53:27 -0800178 LOG(ERROR) << "Failed to allocate crypto buffer";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700179 goto errout;
180 }
181
Paul Crowley14c8c072018-09-18 13:30:21 -0700182 block_bitmap = (u8*)malloc(info.block_size);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700183 if (!block_bitmap) {
Paul Crowley772cc852018-02-01 09:53:27 -0800184 LOG(ERROR) << "failed to allocate block bitmap";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700185 goto errout;
186 }
187
188 for (i = 0; i < aux_info.groups; ++i) {
Paul Crowley772cc852018-02-01 09:53:27 -0800189 LOG(INFO) << "Encrypting group " << i;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700190
191 u32 first_block = aux_info.first_data_block + i * info.blocks_per_group;
Paul Crowley14c8c072018-09-18 13:30:21 -0700192 u32 block_count = std::min(info.blocks_per_group, (u32)(aux_info.len_blocks - first_block));
Paul Crowleyf71ace32016-06-02 11:01:19 -0700193
Paul Crowley14c8c072018-09-18 13:30:21 -0700194 off64_t offset = (u64)info.block_size * aux_info.bg_desc[i].bg_block_bitmap;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700195
196 ret = pread64(data->realfd, block_bitmap, info.block_size, offset);
197 if (ret != (int)info.block_size) {
Paul Crowley772cc852018-02-01 09:53:27 -0800198 LOG(ERROR) << "failed to read all of block group bitmap " << i;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700199 goto errout;
200 }
201
202 offset = (u64)info.block_size * first_block;
203
204 data->count = 0;
205
206 for (block = 0; block < block_count; block++) {
Paul Crowley14c8c072018-09-18 13:30:21 -0700207 int used = (aux_info.bg_desc[i].bg_flags & EXT4_BG_BLOCK_UNINIT)
208 ? 0
209 : bitmap_get_bit(block_bitmap, block);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700210 update_progress(data, used);
211 if (used) {
212 if (data->count == 0) {
213 data->offset = offset;
214 }
215 data->count++;
216 } else {
217 if (flush_outstanding_data(data)) {
218 goto errout;
219 }
220 }
221
222 offset += info.block_size;
223
224 /* Write data if we are aligned or buffer size reached */
Paul Crowley14c8c072018-09-18 13:30:21 -0700225 if (offset % (info.block_size * BLOCKS_AT_A_TIME) == 0 ||
226 data->count == BLOCKS_AT_A_TIME) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700227 if (flush_outstanding_data(data)) {
228 goto errout;
229 }
230 }
Paul Crowleyf71ace32016-06-02 11:01:19 -0700231 }
232 if (flush_outstanding_data(data)) {
233 goto errout;
234 }
235 }
236
237 data->completed = 1;
238 rc = 0;
239
240errout:
241 log_progress(0, true);
242 free(data->buffer);
243 free(block_bitmap);
244 return rc;
245}
246
Paul Crowley772cc852018-02-01 09:53:27 -0800247static int cryptfs_enable_inplace_ext4(char* crypto_blkdev, char* real_blkdev, off64_t size,
248 off64_t* size_already_done, off64_t tot_size,
Paul Crowley0fd26262018-01-30 09:48:19 -0800249 off64_t previously_encrypted_upto,
250 bool set_progress_properties) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700251 u32 i;
252 struct encryptGroupsData data;
Paul Crowley14c8c072018-09-18 13:30:21 -0700253 int rc; // Can't initialize without causing warning -Wclobbered
Paul Crowleyf71ace32016-06-02 11:01:19 -0700254 int retries = RETRY_MOUNT_ATTEMPTS;
255 struct timespec time_started = {0};
256
257 if (previously_encrypted_upto > *size_already_done) {
Paul Crowley772cc852018-02-01 09:53:27 -0800258 LOG(DEBUG) << "Not fast encrypting since resuming part way through";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700259 return -1;
260 }
261
262 memset(&data, 0, sizeof(data));
263 data.real_blkdev = real_blkdev;
264 data.crypto_blkdev = crypto_blkdev;
Paul Crowley0fd26262018-01-30 09:48:19 -0800265 data.set_progress_properties = set_progress_properties;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700266
Paul Crowley0fd26262018-01-30 09:48:19 -0800267 LOG(DEBUG) << "Opening" << real_blkdev;
Paul Crowley14c8c072018-09-18 13:30:21 -0700268 if ((data.realfd = open(real_blkdev, O_RDWR | O_CLOEXEC)) < 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800269 PLOG(ERROR) << "Error opening real_blkdev " << real_blkdev << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700270 rc = -1;
271 goto errout;
272 }
273
Paul Crowley0fd26262018-01-30 09:48:19 -0800274 LOG(DEBUG) << "Opening" << crypto_blkdev;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700275 // Wait until the block device appears. Re-use the mount retry values since it is reasonable.
Paul Crowley14c8c072018-09-18 13:30:21 -0700276 while ((data.cryptofd = open(crypto_blkdev, O_WRONLY | O_CLOEXEC)) < 0) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700277 if (--retries) {
Paul Crowley772cc852018-02-01 09:53:27 -0800278 PLOG(ERROR) << "Error opening crypto_blkdev " << crypto_blkdev
279 << " for ext4 inplace encrypt, retrying";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700280 sleep(RETRY_MOUNT_DELAY_SECONDS);
281 } else {
Paul Crowley772cc852018-02-01 09:53:27 -0800282 PLOG(ERROR) << "Error opening crypto_blkdev " << crypto_blkdev
283 << " for ext4 inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700284 rc = ENABLE_INPLACE_ERR_DEV;
285 goto errout;
286 }
287 }
288
Paul Crowley14c8c072018-09-18 13:30:21 -0700289 if (setjmp(setjmp_env)) { // NOLINT
Paul Crowley772cc852018-02-01 09:53:27 -0800290 LOG(ERROR) << "Reading ext4 extent caused an exception";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700291 rc = -1;
292 goto errout;
293 }
294
295 if (read_ext(data.realfd, 0) != 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800296 LOG(ERROR) << "Failed to read ext4 extent";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700297 rc = -1;
298 goto errout;
299 }
300
301 data.numblocks = size / CRYPT_SECTORS_PER_BUFSIZE;
302 data.tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE;
303 data.blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE;
304
Paul Crowley772cc852018-02-01 09:53:27 -0800305 LOG(INFO) << "Encrypting ext4 filesystem in place...";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700306
307 data.tot_used_blocks = data.numblocks;
308 for (i = 0; i < aux_info.groups; ++i) {
Paul Crowley14c8c072018-09-18 13:30:21 -0700309 data.tot_used_blocks -= aux_info.bg_desc[i].bg_free_blocks_count;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700310 }
311
312 data.one_pct = data.tot_used_blocks / 100;
313 data.cur_pct = 0;
314
315 if (clock_gettime(CLOCK_MONOTONIC, &time_started)) {
Paul Crowley772cc852018-02-01 09:53:27 -0800316 LOG(WARNING) << "Error getting time at start";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700317 // Note - continue anyway - we'll run with 0
318 }
319 data.time_started = time_started.tv_sec;
320 data.remaining_time = -1;
321
322 rc = encrypt_groups(&data);
323 if (rc) {
Paul Crowley772cc852018-02-01 09:53:27 -0800324 LOG(ERROR) << "Error encrypting groups";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700325 goto errout;
326 }
327
328 *size_already_done += data.completed ? size : data.last_written_sector;
329 rc = 0;
330
331errout:
332 close(data.realfd);
333 close(data.cryptofd);
334
335 return rc;
336}
337
Paul Crowley14c8c072018-09-18 13:30:21 -0700338static void log_progress_f2fs(u64 block, bool completed) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700339 // Precondition - if completed data = 0 else data != 0
340
341 // Track progress so we can skip logging blocks
342 static u64 last_block = (u64)-1;
343
344 // Need to close existing 'Encrypting from' log?
345 if (completed || (last_block != (u64)-1 && block != last_block + 1)) {
Paul Crowley772cc852018-02-01 09:53:27 -0800346 LOG(INFO) << "Encrypted to block " << last_block;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700347 last_block = -1;
348 }
349
350 // Need to start new 'Encrypting from' log?
351 if (!completed && (last_block == (u64)-1 || block != last_block + 1)) {
Paul Crowley772cc852018-02-01 09:53:27 -0800352 LOG(INFO) << "Encrypting from block " << block;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700353 }
354
355 // Update offset
356 if (!completed) {
357 last_block = block;
358 }
359}
360
Paul Crowley14c8c072018-09-18 13:30:21 -0700361static int encrypt_one_block_f2fs(u64 pos, void* data) {
362 struct encryptGroupsData* priv_dat = (struct encryptGroupsData*)data;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700363
364 priv_dat->blocks_already_done = pos - 1;
365 update_progress(priv_dat, 1);
366
367 off64_t offset = pos * CRYPT_INPLACE_BUFSIZE;
368
369 if (pread64(priv_dat->realfd, priv_dat->buffer, CRYPT_INPLACE_BUFSIZE, offset) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800370 LOG(ERROR) << "Error reading real_blkdev " << priv_dat->crypto_blkdev
371 << " for f2fs inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700372 return -1;
373 }
374
375 if (pwrite64(priv_dat->cryptofd, priv_dat->buffer, CRYPT_INPLACE_BUFSIZE, offset) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800376 LOG(ERROR) << "Error writing crypto_blkdev " << priv_dat->crypto_blkdev
377 << " for f2fs inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700378 return -1;
379 } else {
380 log_progress_f2fs(pos, false);
381 }
382
383 return 0;
384}
385
Paul Crowley772cc852018-02-01 09:53:27 -0800386static int cryptfs_enable_inplace_f2fs(char* crypto_blkdev, char* real_blkdev, off64_t size,
387 off64_t* size_already_done, off64_t tot_size,
Paul Crowley0fd26262018-01-30 09:48:19 -0800388 off64_t previously_encrypted_upto,
389 bool set_progress_properties) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700390 struct encryptGroupsData data;
Paul Crowley14c8c072018-09-18 13:30:21 -0700391 struct f2fs_info* f2fs_info = NULL;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700392 int rc = ENABLE_INPLACE_ERR_OTHER;
393 if (previously_encrypted_upto > *size_already_done) {
Paul Crowley772cc852018-02-01 09:53:27 -0800394 LOG(DEBUG) << "Not fast encrypting since resuming part way through";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700395 return ENABLE_INPLACE_ERR_OTHER;
396 }
397 memset(&data, 0, sizeof(data));
398 data.real_blkdev = real_blkdev;
399 data.crypto_blkdev = crypto_blkdev;
Paul Crowley0fd26262018-01-30 09:48:19 -0800400 data.set_progress_properties = set_progress_properties;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700401 data.realfd = -1;
402 data.cryptofd = -1;
Paul Crowley14c8c072018-09-18 13:30:21 -0700403 if ((data.realfd = open64(real_blkdev, O_RDWR | O_CLOEXEC)) < 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800404 PLOG(ERROR) << "Error opening real_blkdev " << real_blkdev << " for f2fs inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700405 goto errout;
406 }
Paul Crowley14c8c072018-09-18 13:30:21 -0700407 if ((data.cryptofd = open64(crypto_blkdev, O_WRONLY | O_CLOEXEC)) < 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800408 PLOG(ERROR) << "Error opening crypto_blkdev " << crypto_blkdev
409 << " for f2fs inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700410 rc = ENABLE_INPLACE_ERR_DEV;
411 goto errout;
412 }
413
414 f2fs_info = generate_f2fs_info(data.realfd);
Paul Crowley14c8c072018-09-18 13:30:21 -0700415 if (!f2fs_info) goto errout;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700416
417 data.numblocks = size / CRYPT_SECTORS_PER_BUFSIZE;
418 data.tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE;
419 data.blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE;
420
421 data.tot_used_blocks = get_num_blocks_used(f2fs_info);
422
423 data.one_pct = data.tot_used_blocks / 100;
424 data.cur_pct = 0;
425 data.time_started = time(NULL);
426 data.remaining_time = -1;
427
Paul Crowley14c8c072018-09-18 13:30:21 -0700428 data.buffer = (char*)malloc(f2fs_info->block_size);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700429 if (!data.buffer) {
Paul Crowley772cc852018-02-01 09:53:27 -0800430 LOG(ERROR) << "Failed to allocate crypto buffer";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700431 goto errout;
432 }
433
434 data.count = 0;
435
436 /* Currently, this either runs to completion, or hits a nonrecoverable error */
437 rc = run_on_used_blocks(data.blocks_already_done, f2fs_info, &encrypt_one_block_f2fs, &data);
438
439 if (rc) {
Paul Crowley772cc852018-02-01 09:53:27 -0800440 LOG(ERROR) << "Error in running over f2fs blocks";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700441 rc = ENABLE_INPLACE_ERR_OTHER;
442 goto errout;
443 }
444
445 *size_already_done += size;
446 rc = 0;
447
448errout:
Paul Crowley772cc852018-02-01 09:53:27 -0800449 if (rc) LOG(ERROR) << "Failed to encrypt f2fs filesystem on " << real_blkdev;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700450
451 log_progress_f2fs(0, true);
452 free(f2fs_info);
453 free(data.buffer);
454 close(data.realfd);
455 close(data.cryptofd);
456
457 return rc;
458}
459
Paul Crowley772cc852018-02-01 09:53:27 -0800460static int cryptfs_enable_inplace_full(char* crypto_blkdev, char* real_blkdev, off64_t size,
461 off64_t* size_already_done, off64_t tot_size,
Paul Crowley0fd26262018-01-30 09:48:19 -0800462 off64_t previously_encrypted_upto,
463 bool set_progress_properties) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700464 int realfd, cryptofd;
Paul Crowley14c8c072018-09-18 13:30:21 -0700465 char* buf[CRYPT_INPLACE_BUFSIZE];
Paul Crowleyf71ace32016-06-02 11:01:19 -0700466 int rc = ENABLE_INPLACE_ERR_OTHER;
467 off64_t numblocks, i, remainder;
468 off64_t one_pct, cur_pct, new_pct;
469 off64_t blocks_already_done, tot_numblocks;
470
Paul Crowley14c8c072018-09-18 13:30:21 -0700471 if ((realfd = open(real_blkdev, O_RDONLY | O_CLOEXEC)) < 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800472 PLOG(ERROR) << "Error opening real_blkdev " << real_blkdev << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700473 return ENABLE_INPLACE_ERR_OTHER;
474 }
475
Paul Crowley14c8c072018-09-18 13:30:21 -0700476 if ((cryptofd = open(crypto_blkdev, O_WRONLY | O_CLOEXEC)) < 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800477 PLOG(ERROR) << "Error opening crypto_blkdev " << crypto_blkdev << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700478 close(realfd);
479 return ENABLE_INPLACE_ERR_DEV;
480 }
481
482 /* This is pretty much a simple loop of reading 4K, and writing 4K.
483 * The size passed in is the number of 512 byte sectors in the filesystem.
484 * So compute the number of whole 4K blocks we should read/write,
485 * and the remainder.
486 */
487 numblocks = size / CRYPT_SECTORS_PER_BUFSIZE;
488 remainder = size % CRYPT_SECTORS_PER_BUFSIZE;
489 tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE;
490 blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE;
491
Paul Crowley772cc852018-02-01 09:53:27 -0800492 LOG(ERROR) << "Encrypting filesystem in place...";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700493
494 i = previously_encrypted_upto + 1 - *size_already_done;
495
496 if (lseek64(realfd, i * CRYPT_SECTOR_SIZE, SEEK_SET) < 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800497 PLOG(ERROR) << "Cannot seek to previously encrypted point on " << real_blkdev;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700498 goto errout;
499 }
500
501 if (lseek64(cryptofd, i * CRYPT_SECTOR_SIZE, SEEK_SET) < 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800502 PLOG(ERROR) << "Cannot seek to previously encrypted point on " << crypto_blkdev;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700503 goto errout;
504 }
505
Paul Crowley14c8c072018-09-18 13:30:21 -0700506 for (; i < size && i % CRYPT_SECTORS_PER_BUFSIZE != 0; ++i) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700507 if (unix_read(realfd, buf, CRYPT_SECTOR_SIZE) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800508 PLOG(ERROR) << "Error reading initial sectors from real_blkdev " << real_blkdev
509 << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700510 goto errout;
511 }
512 if (unix_write(cryptofd, buf, CRYPT_SECTOR_SIZE) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800513 PLOG(ERROR) << "Error writing initial sectors to crypto_blkdev " << crypto_blkdev
514 << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700515 goto errout;
516 } else {
Paul Crowley772cc852018-02-01 09:53:27 -0800517 LOG(INFO) << "Encrypted 1 block at " << i;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700518 }
519 }
520
521 one_pct = tot_numblocks / 100;
522 cur_pct = 0;
523 /* process the majority of the filesystem in blocks */
Paul Crowley14c8c072018-09-18 13:30:21 -0700524 for (i /= CRYPT_SECTORS_PER_BUFSIZE; i < numblocks; i++) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700525 new_pct = (i + blocks_already_done) / one_pct;
Paul Crowley0fd26262018-01-30 09:48:19 -0800526 if (set_progress_properties && new_pct > cur_pct) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700527 char buf[8];
528
529 cur_pct = new_pct;
530 snprintf(buf, sizeof(buf), "%" PRId64, cur_pct);
Paul Crowley772cc852018-02-01 09:53:27 -0800531 android::base::SetProperty("vold.encrypt_progress", buf);
Paul Crowleyf71ace32016-06-02 11:01:19 -0700532 }
533 if (unix_read(realfd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800534 PLOG(ERROR) << "Error reading real_blkdev " << real_blkdev << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700535 goto errout;
536 }
537 if (unix_write(cryptofd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800538 PLOG(ERROR) << "Error writing crypto_blkdev " << crypto_blkdev << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700539 goto errout;
540 } else {
Paul Crowley772cc852018-02-01 09:53:27 -0800541 LOG(DEBUG) << "Encrypted " << CRYPT_SECTORS_PER_BUFSIZE << " block at "
542 << i * CRYPT_SECTORS_PER_BUFSIZE;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700543 }
Paul Crowleyf71ace32016-06-02 11:01:19 -0700544 }
545
546 /* Do any remaining sectors */
Paul Crowley14c8c072018-09-18 13:30:21 -0700547 for (i = 0; i < remainder; i++) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700548 if (unix_read(realfd, buf, CRYPT_SECTOR_SIZE) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800549 LOG(ERROR) << "Error reading final sectors from real_blkdev " << real_blkdev
550 << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700551 goto errout;
552 }
553 if (unix_write(cryptofd, buf, CRYPT_SECTOR_SIZE) <= 0) {
Paul Crowley772cc852018-02-01 09:53:27 -0800554 LOG(ERROR) << "Error writing final sectors to crypto_blkdev " << crypto_blkdev
555 << " for inplace encrypt";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700556 goto errout;
557 } else {
Paul Crowley772cc852018-02-01 09:53:27 -0800558 LOG(INFO) << "Encrypted 1 block at next location";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700559 }
560 }
561
562 *size_already_done += size;
563 rc = 0;
564
565errout:
566 close(realfd);
567 close(cryptofd);
568
569 return rc;
570}
571
572/* returns on of the ENABLE_INPLACE_* return codes */
Paul Crowley772cc852018-02-01 09:53:27 -0800573int cryptfs_enable_inplace(char* crypto_blkdev, char* real_blkdev, off64_t size,
574 off64_t* size_already_done, off64_t tot_size,
Paul Crowley0fd26262018-01-30 09:48:19 -0800575 off64_t previously_encrypted_upto, bool set_progress_properties) {
Paul Crowleyf71ace32016-06-02 11:01:19 -0700576 int rc_ext4, rc_f2fs, rc_full;
Paul Crowley0fd26262018-01-30 09:48:19 -0800577 LOG(DEBUG) << "cryptfs_enable_inplace(" << crypto_blkdev << ", " << real_blkdev << ", " << size
578 << ", " << size_already_done << ", " << tot_size << ", " << previously_encrypted_upto
579 << ", " << set_progress_properties << ")";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700580 if (previously_encrypted_upto) {
Paul Crowley772cc852018-02-01 09:53:27 -0800581 LOG(DEBUG) << "Continuing encryption from " << previously_encrypted_upto;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700582 }
583
584 if (*size_already_done + size < previously_encrypted_upto) {
Paul Crowley0fd26262018-01-30 09:48:19 -0800585 LOG(DEBUG) << "cryptfs_enable_inplace already done";
Paul Crowleyf71ace32016-06-02 11:01:19 -0700586 *size_already_done += size;
587 return 0;
588 }
589
590 /* TODO: identify filesystem type.
591 * As is, cryptfs_enable_inplace_ext4 will fail on an f2fs partition, and
592 * then we will drop down to cryptfs_enable_inplace_f2fs.
593 * */
Paul Crowley0fd26262018-01-30 09:48:19 -0800594 if ((rc_ext4 = cryptfs_enable_inplace_ext4(crypto_blkdev, real_blkdev, size, size_already_done,
595 tot_size, previously_encrypted_upto,
596 set_progress_properties)) == 0) {
597 LOG(DEBUG) << "cryptfs_enable_inplace_ext4 success";
598 return 0;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700599 }
Paul Crowley772cc852018-02-01 09:53:27 -0800600 LOG(DEBUG) << "cryptfs_enable_inplace_ext4()=" << rc_ext4;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700601
Paul Crowley0fd26262018-01-30 09:48:19 -0800602 if ((rc_f2fs = cryptfs_enable_inplace_f2fs(crypto_blkdev, real_blkdev, size, size_already_done,
603 tot_size, previously_encrypted_upto,
604 set_progress_properties)) == 0) {
605 LOG(DEBUG) << "cryptfs_enable_inplace_f2fs success";
606 return 0;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700607 }
Paul Crowley772cc852018-02-01 09:53:27 -0800608 LOG(DEBUG) << "cryptfs_enable_inplace_f2fs()=" << rc_f2fs;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700609
Paul Crowley0fd26262018-01-30 09:48:19 -0800610 rc_full =
611 cryptfs_enable_inplace_full(crypto_blkdev, real_blkdev, size, size_already_done, tot_size,
612 previously_encrypted_upto, set_progress_properties);
Paul Crowley772cc852018-02-01 09:53:27 -0800613 LOG(DEBUG) << "cryptfs_enable_inplace_full()=" << rc_full;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700614
615 /* Hack for b/17898962, the following is the symptom... */
Paul Crowley14c8c072018-09-18 13:30:21 -0700616 if (rc_ext4 == ENABLE_INPLACE_ERR_DEV && rc_f2fs == ENABLE_INPLACE_ERR_DEV &&
617 rc_full == ENABLE_INPLACE_ERR_DEV) {
Paul Crowley0fd26262018-01-30 09:48:19 -0800618 LOG(DEBUG) << "ENABLE_INPLACE_ERR_DEV";
619 return ENABLE_INPLACE_ERR_DEV;
Paul Crowleyf71ace32016-06-02 11:01:19 -0700620 }
621 return rc_full;
622}