| /* |
| * Copyright (C) 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "Utils.h" |
| |
| #include "Process.h" |
| #include "sehandle.h" |
| |
| #include <android-base/chrono_utils.h> |
| #include <android-base/file.h> |
| #include <android-base/logging.h> |
| #include <android-base/properties.h> |
| #include <android-base/stringprintf.h> |
| #include <android-base/strings.h> |
| #include <android-base/unique_fd.h> |
| #include <cutils/fs.h> |
| #include <logwrap/logwrap.h> |
| #include <private/android_filesystem_config.h> |
| #include <private/android_projectid_config.h> |
| |
| #include <dirent.h> |
| #include <fcntl.h> |
| #include <linux/fs.h> |
| #include <linux/posix_acl.h> |
| #include <linux/posix_acl_xattr.h> |
| #include <mntent.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <sys/mount.h> |
| #include <sys/stat.h> |
| #include <sys/statvfs.h> |
| #include <sys/sysmacros.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <sys/xattr.h> |
| #include <unistd.h> |
| |
| #include <filesystem> |
| #include <list> |
| #include <mutex> |
| #include <regex> |
| #include <thread> |
| |
| #ifndef UMOUNT_NOFOLLOW |
| #define UMOUNT_NOFOLLOW 0x00000008 /* Don't follow symlink on umount */ |
| #endif |
| |
| using namespace std::chrono_literals; |
| using android::base::EndsWith; |
| using android::base::ReadFileToString; |
| using android::base::StartsWith; |
| using android::base::StringPrintf; |
| using android::base::unique_fd; |
| |
| namespace android { |
| namespace vold { |
| |
| char* sBlkidContext = nullptr; |
| char* sBlkidUntrustedContext = nullptr; |
| char* sFsckContext = nullptr; |
| char* sFsckUntrustedContext = nullptr; |
| |
| bool sSleepOnUnmount = true; |
| |
| static const char* kBlkidPath = "/system/bin/blkid"; |
| static const char* kKeyPath = "/data/misc/vold"; |
| |
| static const char* kProcDevices = "/proc/devices"; |
| static const char* kProcFilesystems = "/proc/filesystems"; |
| |
| static const char* kAndroidDir = "/Android/"; |
| static const char* kAppDataDir = "/Android/data/"; |
| static const char* kAppMediaDir = "/Android/media/"; |
| static const char* kAppObbDir = "/Android/obb/"; |
| |
| static const char* kMediaProviderCtx = "u:r:mediaprovider:"; |
| static const char* kMediaProviderAppCtx = "u:r:mediaprovider_app:"; |
| |
| // Lock used to protect process-level SELinux changes from racing with each |
| // other between multiple threads. |
| static std::mutex kSecurityLock; |
| |
| std::string GetFuseMountPathForUser(userid_t user_id, const std::string& relative_upper_path) { |
| return StringPrintf("/mnt/user/%d/%s", user_id, relative_upper_path.c_str()); |
| } |
| |
| status_t CreateDeviceNode(const std::string& path, dev_t dev) { |
| std::lock_guard<std::mutex> lock(kSecurityLock); |
| const char* cpath = path.c_str(); |
| status_t res = 0; |
| |
| char* secontext = nullptr; |
| if (sehandle) { |
| if (!selabel_lookup(sehandle, &secontext, cpath, S_IFBLK)) { |
| setfscreatecon(secontext); |
| } |
| } |
| |
| mode_t mode = 0660 | S_IFBLK; |
| if (mknod(cpath, mode, dev) < 0) { |
| if (errno != EEXIST) { |
| PLOG(ERROR) << "Failed to create device node for " << major(dev) << ":" << minor(dev) |
| << " at " << path; |
| res = -errno; |
| } |
| } |
| |
| if (secontext) { |
| setfscreatecon(nullptr); |
| freecon(secontext); |
| } |
| |
| return res; |
| } |
| |
| status_t DestroyDeviceNode(const std::string& path) { |
| const char* cpath = path.c_str(); |
| if (TEMP_FAILURE_RETRY(unlink(cpath))) { |
| return -errno; |
| } else { |
| return OK; |
| } |
| } |
| |
| // Sets a default ACL on the directory. |
| status_t SetDefaultAcl(const std::string& path, mode_t mode, uid_t uid, gid_t gid, |
| std::vector<gid_t> additionalGids) { |
| if (IsSdcardfsUsed()) { |
| // sdcardfs magically takes care of this |
| return OK; |
| } |
| |
| size_t num_entries = 3 + (additionalGids.size() > 0 ? additionalGids.size() + 1 : 0); |
| size_t size = sizeof(posix_acl_xattr_header) + num_entries * sizeof(posix_acl_xattr_entry); |
| auto buf = std::make_unique<uint8_t[]>(size); |
| |
| posix_acl_xattr_header* acl_header = reinterpret_cast<posix_acl_xattr_header*>(buf.get()); |
| acl_header->a_version = POSIX_ACL_XATTR_VERSION; |
| |
| posix_acl_xattr_entry* entry = |
| reinterpret_cast<posix_acl_xattr_entry*>(buf.get() + sizeof(posix_acl_xattr_header)); |
| |
| int tag_index = 0; |
| |
| entry[tag_index].e_tag = ACL_USER_OBJ; |
| // The existing mode_t mask has the ACL in the lower 9 bits: |
| // the lowest 3 for "other", the next 3 the group, the next 3 for the owner |
| // Use the mode_t masks to get these bits out, and shift them to get the |
| // correct value per entity. |
| // |
| // Eg if mode_t = 0700, rwx for the owner, then & S_IRWXU >> 6 results in 7 |
| entry[tag_index].e_perm = (mode & S_IRWXU) >> 6; |
| entry[tag_index].e_id = uid; |
| tag_index++; |
| |
| entry[tag_index].e_tag = ACL_GROUP_OBJ; |
| entry[tag_index].e_perm = (mode & S_IRWXG) >> 3; |
| entry[tag_index].e_id = gid; |
| tag_index++; |
| |
| if (additionalGids.size() > 0) { |
| for (gid_t additional_gid : additionalGids) { |
| entry[tag_index].e_tag = ACL_GROUP; |
| entry[tag_index].e_perm = (mode & S_IRWXG) >> 3; |
| entry[tag_index].e_id = additional_gid; |
| tag_index++; |
| } |
| |
| entry[tag_index].e_tag = ACL_MASK; |
| entry[tag_index].e_perm = (mode & S_IRWXG) >> 3; |
| entry[tag_index].e_id = 0; |
| tag_index++; |
| } |
| |
| entry[tag_index].e_tag = ACL_OTHER; |
| entry[tag_index].e_perm = mode & S_IRWXO; |
| entry[tag_index].e_id = 0; |
| |
| int ret = setxattr(path.c_str(), XATTR_NAME_POSIX_ACL_DEFAULT, acl_header, size, 0); |
| |
| if (ret != 0) { |
| PLOG(ERROR) << "Failed to set default ACL on " << path; |
| } |
| |
| return ret; |
| } |
| |
| int SetQuotaInherit(const std::string& path) { |
| unsigned int flags; |
| |
| android::base::unique_fd fd(TEMP_FAILURE_RETRY(open(path.c_str(), O_RDONLY | O_CLOEXEC))); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open " << path << " to set project id inheritance."; |
| return -1; |
| } |
| |
| int ret = ioctl(fd, FS_IOC_GETFLAGS, &flags); |
| if (ret == -1) { |
| PLOG(ERROR) << "Failed to get flags for " << path << " to set project id inheritance."; |
| return ret; |
| } |
| |
| flags |= FS_PROJINHERIT_FL; |
| |
| ret = ioctl(fd, FS_IOC_SETFLAGS, &flags); |
| if (ret == -1) { |
| PLOG(ERROR) << "Failed to set flags for " << path << " to set project id inheritance."; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int SetQuotaProjectId(const std::string& path, long projectId) { |
| struct fsxattr fsx; |
| |
| android::base::unique_fd fd(TEMP_FAILURE_RETRY(open(path.c_str(), O_RDONLY | O_CLOEXEC))); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open " << path << " to set project id."; |
| return -1; |
| } |
| |
| int ret = ioctl(fd, FS_IOC_FSGETXATTR, &fsx); |
| if (ret == -1) { |
| PLOG(ERROR) << "Failed to get extended attributes for " << path << " to get project id."; |
| return ret; |
| } |
| |
| fsx.fsx_projid = projectId; |
| ret = ioctl(fd, FS_IOC_FSSETXATTR, &fsx); |
| if (ret == -1) { |
| PLOG(ERROR) << "Failed to set project id on " << path; |
| return ret; |
| } |
| return 0; |
| } |
| |
| int PrepareDirWithProjectId(const std::string& path, mode_t mode, uid_t uid, gid_t gid, |
| long projectId) { |
| int ret = fs_prepare_dir(path.c_str(), mode, uid, gid); |
| |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (!IsSdcardfsUsed()) { |
| ret = SetQuotaProjectId(path, projectId); |
| } |
| |
| return ret; |
| } |
| |
| static int FixupAppDir(const std::string& path, mode_t mode, uid_t uid, gid_t gid, long projectId) { |
| namespace fs = std::filesystem; |
| |
| // Setup the directory itself correctly |
| int ret = PrepareDirWithProjectId(path, mode, uid, gid, projectId); |
| if (ret != OK) { |
| return ret; |
| } |
| |
| // Fixup all of its file entries |
| for (const auto& itEntry : fs::directory_iterator(path)) { |
| ret = lchown(itEntry.path().c_str(), uid, gid); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = chmod(itEntry.path().c_str(), mode); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (!IsSdcardfsUsed()) { |
| ret = SetQuotaProjectId(itEntry.path(), projectId); |
| if (ret != 0) { |
| return ret; |
| } |
| } |
| } |
| |
| return OK; |
| } |
| |
| int PrepareAppDirFromRoot(const std::string& path, const std::string& root, int appUid, |
| bool fixupExisting) { |
| long projectId; |
| size_t pos; |
| int ret = 0; |
| bool sdcardfsSupport = IsSdcardfsUsed(); |
| |
| // Make sure the Android/ directories exist and are setup correctly |
| ret = PrepareAndroidDirs(root); |
| if (ret != 0) { |
| LOG(ERROR) << "Failed to prepare Android/ directories."; |
| return ret; |
| } |
| |
| // Now create the application-specific subdir(s) |
| // path is something like /data/media/0/Android/data/com.foo/files |
| // First, chop off the volume root, eg /data/media/0 |
| std::string pathFromRoot = path.substr(root.length()); |
| |
| uid_t uid = appUid; |
| gid_t gid = AID_MEDIA_RW; |
| std::vector<gid_t> additionalGids; |
| std::string appDir; |
| |
| // Check that the next part matches one of the allowed Android/ dirs |
| if (StartsWith(pathFromRoot, kAppDataDir)) { |
| appDir = kAppDataDir; |
| if (!sdcardfsSupport) { |
| gid = AID_EXT_DATA_RW; |
| // Also add the app's own UID as a group; since apps belong to a group |
| // that matches their UID, this ensures that they will always have access to |
| // the files created in these dirs, even if they are created by other processes |
| additionalGids.push_back(uid); |
| } |
| } else if (StartsWith(pathFromRoot, kAppMediaDir)) { |
| appDir = kAppMediaDir; |
| if (!sdcardfsSupport) { |
| gid = AID_MEDIA_RW; |
| } |
| } else if (StartsWith(pathFromRoot, kAppObbDir)) { |
| appDir = kAppObbDir; |
| if (!sdcardfsSupport) { |
| gid = AID_EXT_OBB_RW; |
| // See comments for kAppDataDir above |
| additionalGids.push_back(uid); |
| } |
| } else { |
| LOG(ERROR) << "Invalid application directory: " << path; |
| return -EINVAL; |
| } |
| |
| // mode = 770, plus sticky bit on directory to inherit GID when apps |
| // create subdirs |
| mode_t mode = S_IRWXU | S_IRWXG | S_ISGID; |
| // the project ID for application-specific directories is directly |
| // derived from their uid |
| |
| // Chop off the generic application-specific part, eg /Android/data/ |
| // this leaves us with something like com.foo/files/ |
| std::string leftToCreate = pathFromRoot.substr(appDir.length()); |
| if (!EndsWith(leftToCreate, "/")) { |
| leftToCreate += "/"; |
| } |
| std::string pathToCreate = root + appDir; |
| int depth = 0; |
| // Derive initial project ID |
| if (appDir == kAppDataDir || appDir == kAppMediaDir) { |
| projectId = uid - AID_APP_START + PROJECT_ID_EXT_DATA_START; |
| } else if (appDir == kAppObbDir) { |
| projectId = uid - AID_APP_START + PROJECT_ID_EXT_OBB_START; |
| } |
| |
| while ((pos = leftToCreate.find('/')) != std::string::npos) { |
| std::string component = leftToCreate.substr(0, pos + 1); |
| leftToCreate = leftToCreate.erase(0, pos + 1); |
| pathToCreate = pathToCreate + component; |
| |
| if (appDir == kAppDataDir && depth == 1 && component == "cache/") { |
| // All dirs use the "app" project ID, except for the cache dirs in |
| // Android/data, eg Android/data/com.foo/cache |
| // Note that this "sticks" - eg subdirs of this dir need the same |
| // project ID. |
| projectId = uid - AID_APP_START + PROJECT_ID_EXT_CACHE_START; |
| } |
| |
| if (fixupExisting && access(pathToCreate.c_str(), F_OK) == 0) { |
| // Fixup all files in this existing directory with the correct UID/GID |
| // and project ID. |
| ret = FixupAppDir(pathToCreate, mode, uid, gid, projectId); |
| } else { |
| ret = PrepareDirWithProjectId(pathToCreate, mode, uid, gid, projectId); |
| } |
| |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (depth == 0) { |
| // Set the default ACL on the top-level application-specific directories, |
| // to ensure that even if applications run with a umask of 0077, |
| // new directories within these directories will allow the GID |
| // specified here to write; this is necessary for apps like |
| // installers and MTP, that require access here. |
| // |
| // See man (5) acl for more details. |
| ret = SetDefaultAcl(pathToCreate, mode, uid, gid, additionalGids); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (!sdcardfsSupport) { |
| // Set project ID inheritance, so that future subdirectories inherit the |
| // same project ID |
| ret = SetQuotaInherit(pathToCreate); |
| if (ret != 0) { |
| return ret; |
| } |
| } |
| } |
| |
| depth++; |
| } |
| |
| return OK; |
| } |
| |
| int SetAttrs(const std::string& path, unsigned int attrs) { |
| unsigned int flags; |
| android::base::unique_fd fd( |
| TEMP_FAILURE_RETRY(open(path.c_str(), O_RDONLY | O_NONBLOCK | O_CLOEXEC))); |
| |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open " << path; |
| return -1; |
| } |
| |
| if (ioctl(fd, FS_IOC_GETFLAGS, &flags)) { |
| PLOG(ERROR) << "Failed to get flags for " << path; |
| return -1; |
| } |
| |
| if ((flags & attrs) == attrs) return 0; |
| flags |= attrs; |
| if (ioctl(fd, FS_IOC_SETFLAGS, &flags)) { |
| PLOG(ERROR) << "Failed to set flags for " << path << "(0x" << std::hex << attrs << ")"; |
| return -1; |
| } |
| return 0; |
| } |
| |
| status_t PrepareDir(const std::string& path, mode_t mode, uid_t uid, gid_t gid, |
| unsigned int attrs) { |
| std::lock_guard<std::mutex> lock(kSecurityLock); |
| const char* cpath = path.c_str(); |
| |
| char* secontext = nullptr; |
| if (sehandle) { |
| if (!selabel_lookup(sehandle, &secontext, cpath, S_IFDIR)) { |
| setfscreatecon(secontext); |
| } |
| } |
| |
| int res = fs_prepare_dir(cpath, mode, uid, gid); |
| |
| if (secontext) { |
| setfscreatecon(nullptr); |
| freecon(secontext); |
| } |
| |
| if (res) return -errno; |
| if (attrs) res = SetAttrs(path, attrs); |
| |
| if (res == 0) { |
| return OK; |
| } else { |
| return -errno; |
| } |
| } |
| |
| status_t ForceUnmount(const std::string& path) { |
| const char* cpath = path.c_str(); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| // Apps might still be handling eject request, so wait before |
| // we start sending signals |
| if (sSleepOnUnmount) sleep(5); |
| |
| KillProcessesWithOpenFiles(path, SIGINT); |
| if (sSleepOnUnmount) sleep(5); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| |
| KillProcessesWithOpenFiles(path, SIGTERM); |
| if (sSleepOnUnmount) sleep(5); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| |
| KillProcessesWithOpenFiles(path, SIGKILL); |
| if (sSleepOnUnmount) sleep(5); |
| if (!umount2(cpath, UMOUNT_NOFOLLOW) || errno == EINVAL || errno == ENOENT) { |
| return OK; |
| } |
| PLOG(INFO) << "ForceUnmount failed"; |
| return -errno; |
| } |
| |
| status_t KillProcessesWithTmpfsMountPrefix(const std::string& path) { |
| if (KillProcessesWithTmpfsMounts(path, SIGINT) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| if (KillProcessesWithTmpfsMounts(path, SIGTERM) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| if (KillProcessesWithTmpfsMounts(path, SIGKILL) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| // Send SIGKILL a second time to determine if we've |
| // actually killed everyone mount |
| if (KillProcessesWithTmpfsMounts(path, SIGKILL) == 0) { |
| return OK; |
| } |
| PLOG(ERROR) << "Failed to kill processes using " << path; |
| return -EBUSY; |
| } |
| |
| status_t KillProcessesUsingPath(const std::string& path) { |
| if (KillProcessesWithOpenFiles(path, SIGINT, false /* killFuseDaemon */) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| if (KillProcessesWithOpenFiles(path, SIGTERM, false /* killFuseDaemon */) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| if (KillProcessesWithOpenFiles(path, SIGKILL, false /* killFuseDaemon */) == 0) { |
| return OK; |
| } |
| if (sSleepOnUnmount) sleep(5); |
| |
| // Send SIGKILL a second time to determine if we've |
| // actually killed everyone with open files |
| // This time, we also kill the FUSE daemon if found |
| if (KillProcessesWithOpenFiles(path, SIGKILL, true /* killFuseDaemon */) == 0) { |
| return OK; |
| } |
| PLOG(ERROR) << "Failed to kill processes using " << path; |
| return -EBUSY; |
| } |
| |
| status_t BindMount(const std::string& source, const std::string& target) { |
| if (UnmountTree(target) < 0) { |
| return -errno; |
| } |
| if (TEMP_FAILURE_RETRY(mount(source.c_str(), target.c_str(), nullptr, MS_BIND, nullptr)) < 0) { |
| PLOG(ERROR) << "Failed to bind mount " << source << " to " << target; |
| return -errno; |
| } |
| return OK; |
| } |
| |
| status_t Symlink(const std::string& target, const std::string& linkpath) { |
| if (Unlink(linkpath) < 0) { |
| return -errno; |
| } |
| if (TEMP_FAILURE_RETRY(symlink(target.c_str(), linkpath.c_str())) < 0) { |
| PLOG(ERROR) << "Failed to create symlink " << linkpath << " to " << target; |
| return -errno; |
| } |
| return OK; |
| } |
| |
| status_t Unlink(const std::string& linkpath) { |
| if (TEMP_FAILURE_RETRY(unlink(linkpath.c_str())) < 0 && errno != EINVAL && errno != ENOENT) { |
| PLOG(ERROR) << "Failed to unlink " << linkpath; |
| return -errno; |
| } |
| return OK; |
| } |
| |
| status_t CreateDir(const std::string& dir, mode_t mode) { |
| struct stat sb; |
| if (TEMP_FAILURE_RETRY(stat(dir.c_str(), &sb)) == 0) { |
| if (S_ISDIR(sb.st_mode)) { |
| return OK; |
| } else if (TEMP_FAILURE_RETRY(unlink(dir.c_str())) == -1) { |
| PLOG(ERROR) << "Failed to unlink " << dir; |
| return -errno; |
| } |
| } else if (errno != ENOENT) { |
| PLOG(ERROR) << "Failed to stat " << dir; |
| return -errno; |
| } |
| if (TEMP_FAILURE_RETRY(mkdir(dir.c_str(), mode)) == -1 && errno != EEXIST) { |
| PLOG(ERROR) << "Failed to mkdir " << dir; |
| return -errno; |
| } |
| return OK; |
| } |
| |
| bool FindValue(const std::string& raw, const std::string& key, std::string* value) { |
| auto qual = key + "=\""; |
| size_t start = 0; |
| while (true) { |
| start = raw.find(qual, start); |
| if (start == std::string::npos) return false; |
| if (start == 0 || raw[start - 1] == ' ') { |
| break; |
| } |
| start += 1; |
| } |
| start += qual.length(); |
| |
| auto end = raw.find("\"", start); |
| if (end == std::string::npos) return false; |
| |
| *value = raw.substr(start, end - start); |
| return true; |
| } |
| |
| static status_t readMetadata(const std::string& path, std::string* fsType, std::string* fsUuid, |
| std::string* fsLabel, bool untrusted) { |
| fsType->clear(); |
| fsUuid->clear(); |
| fsLabel->clear(); |
| |
| std::vector<std::string> cmd; |
| cmd.push_back(kBlkidPath); |
| cmd.push_back("-c"); |
| cmd.push_back("/dev/null"); |
| cmd.push_back("-s"); |
| cmd.push_back("TYPE"); |
| cmd.push_back("-s"); |
| cmd.push_back("UUID"); |
| cmd.push_back("-s"); |
| cmd.push_back("LABEL"); |
| cmd.push_back(path); |
| |
| std::vector<std::string> output; |
| status_t res = ForkExecvp(cmd, &output, untrusted ? sBlkidUntrustedContext : sBlkidContext); |
| if (res != OK) { |
| LOG(WARNING) << "blkid failed to identify " << path; |
| return res; |
| } |
| |
| for (const auto& line : output) { |
| // Extract values from blkid output, if defined |
| FindValue(line, "TYPE", fsType); |
| FindValue(line, "UUID", fsUuid); |
| FindValue(line, "LABEL", fsLabel); |
| } |
| |
| return OK; |
| } |
| |
| status_t ReadMetadata(const std::string& path, std::string* fsType, std::string* fsUuid, |
| std::string* fsLabel) { |
| return readMetadata(path, fsType, fsUuid, fsLabel, false); |
| } |
| |
| status_t ReadMetadataUntrusted(const std::string& path, std::string* fsType, std::string* fsUuid, |
| std::string* fsLabel) { |
| return readMetadata(path, fsType, fsUuid, fsLabel, true); |
| } |
| |
| static std::vector<const char*> ConvertToArgv(const std::vector<std::string>& args) { |
| std::vector<const char*> argv; |
| argv.reserve(args.size() + 1); |
| for (const auto& arg : args) { |
| if (argv.empty()) { |
| LOG(DEBUG) << arg; |
| } else { |
| LOG(DEBUG) << " " << arg; |
| } |
| argv.emplace_back(arg.data()); |
| } |
| argv.emplace_back(nullptr); |
| return argv; |
| } |
| |
| static status_t ReadLinesFromFdAndLog(std::vector<std::string>* output, |
| android::base::unique_fd ufd) { |
| std::unique_ptr<FILE, int (*)(FILE*)> fp(android::base::Fdopen(std::move(ufd), "r"), fclose); |
| if (!fp) { |
| PLOG(ERROR) << "fdopen in ReadLinesFromFdAndLog"; |
| return -errno; |
| } |
| if (output) output->clear(); |
| char line[1024]; |
| while (fgets(line, sizeof(line), fp.get()) != nullptr) { |
| LOG(DEBUG) << line; |
| if (output) output->emplace_back(line); |
| } |
| return OK; |
| } |
| |
| status_t ForkExecvp(const std::vector<std::string>& args, std::vector<std::string>* output, |
| char* context) { |
| auto argv = ConvertToArgv(args); |
| |
| android::base::unique_fd pipe_read, pipe_write; |
| if (!android::base::Pipe(&pipe_read, &pipe_write)) { |
| PLOG(ERROR) << "Pipe in ForkExecvp"; |
| return -errno; |
| } |
| |
| pid_t pid = fork(); |
| if (pid == 0) { |
| if (context) { |
| if (setexeccon(context)) { |
| LOG(ERROR) << "Failed to setexeccon in ForkExecvp"; |
| abort(); |
| } |
| } |
| pipe_read.reset(); |
| if (dup2(pipe_write.get(), STDOUT_FILENO) == -1) { |
| PLOG(ERROR) << "dup2 in ForkExecvp"; |
| _exit(EXIT_FAILURE); |
| } |
| pipe_write.reset(); |
| execvp(argv[0], const_cast<char**>(argv.data())); |
| PLOG(ERROR) << "exec in ForkExecvp"; |
| _exit(EXIT_FAILURE); |
| } |
| if (pid == -1) { |
| PLOG(ERROR) << "fork in ForkExecvp"; |
| return -errno; |
| } |
| |
| pipe_write.reset(); |
| auto st = ReadLinesFromFdAndLog(output, std::move(pipe_read)); |
| if (st != 0) return st; |
| |
| int status; |
| if (waitpid(pid, &status, 0) == -1) { |
| PLOG(ERROR) << "waitpid in ForkExecvp"; |
| return -errno; |
| } |
| if (!WIFEXITED(status)) { |
| LOG(ERROR) << "Process did not exit normally, status: " << status; |
| return -ECHILD; |
| } |
| if (WEXITSTATUS(status)) { |
| LOG(ERROR) << "Process exited with code: " << WEXITSTATUS(status); |
| return WEXITSTATUS(status); |
| } |
| return OK; |
| } |
| |
| status_t ForkExecvpTimeout(const std::vector<std::string>& args, std::chrono::seconds timeout, |
| char* context) { |
| int status; |
| |
| pid_t wait_timeout_pid = fork(); |
| if (wait_timeout_pid == 0) { |
| pid_t pid = ForkExecvpAsync(args, context); |
| if (pid == -1) { |
| _exit(EXIT_FAILURE); |
| } |
| pid_t timer_pid = fork(); |
| if (timer_pid == 0) { |
| sleep(timeout.count()); |
| _exit(ETIMEDOUT); |
| } |
| if (timer_pid == -1) { |
| PLOG(ERROR) << "fork in ForkExecvpAsync_timeout"; |
| kill(pid, SIGTERM); |
| _exit(EXIT_FAILURE); |
| } |
| pid_t finished = wait(&status); |
| if (finished == pid) { |
| kill(timer_pid, SIGTERM); |
| } else { |
| kill(pid, SIGTERM); |
| } |
| if (!WIFEXITED(status)) { |
| _exit(ECHILD); |
| } |
| _exit(WEXITSTATUS(status)); |
| } |
| if (waitpid(wait_timeout_pid, &status, 0) == -1) { |
| PLOG(ERROR) << "waitpid in ForkExecvpAsync_timeout"; |
| return -errno; |
| } |
| if (!WIFEXITED(status)) { |
| LOG(ERROR) << "Process did not exit normally, status: " << status; |
| return -ECHILD; |
| } |
| if (WEXITSTATUS(status)) { |
| LOG(ERROR) << "Process exited with code: " << WEXITSTATUS(status); |
| return WEXITSTATUS(status); |
| } |
| return OK; |
| } |
| |
| pid_t ForkExecvpAsync(const std::vector<std::string>& args, char* context) { |
| auto argv = ConvertToArgv(args); |
| |
| pid_t pid = fork(); |
| if (pid == 0) { |
| close(STDIN_FILENO); |
| close(STDOUT_FILENO); |
| close(STDERR_FILENO); |
| if (context) { |
| if (setexeccon(context)) { |
| LOG(ERROR) << "Failed to setexeccon in ForkExecvpAsync"; |
| abort(); |
| } |
| } |
| |
| execvp(argv[0], const_cast<char**>(argv.data())); |
| PLOG(ERROR) << "exec in ForkExecvpAsync"; |
| _exit(EXIT_FAILURE); |
| } |
| if (pid == -1) { |
| PLOG(ERROR) << "fork in ForkExecvpAsync"; |
| return -1; |
| } |
| return pid; |
| } |
| |
| status_t ReadRandomBytes(size_t bytes, std::string& out) { |
| out.resize(bytes); |
| return ReadRandomBytes(bytes, &out[0]); |
| } |
| |
| status_t ReadRandomBytes(size_t bytes, char* buf) { |
| int fd = TEMP_FAILURE_RETRY(open("/dev/urandom", O_RDONLY | O_CLOEXEC | O_NOFOLLOW)); |
| if (fd == -1) { |
| return -errno; |
| } |
| |
| ssize_t n; |
| while ((n = TEMP_FAILURE_RETRY(read(fd, &buf[0], bytes))) > 0) { |
| bytes -= n; |
| buf += n; |
| } |
| close(fd); |
| |
| if (bytes == 0) { |
| return OK; |
| } else { |
| return -EIO; |
| } |
| } |
| |
| status_t GenerateRandomUuid(std::string& out) { |
| status_t res = ReadRandomBytes(16, out); |
| if (res == OK) { |
| out[6] &= 0x0f; /* clear version */ |
| out[6] |= 0x40; /* set to version 4 */ |
| out[8] &= 0x3f; /* clear variant */ |
| out[8] |= 0x80; /* set to IETF variant */ |
| } |
| return res; |
| } |
| |
| status_t HexToStr(const std::string& hex, std::string& str) { |
| str.clear(); |
| bool even = true; |
| char cur = 0; |
| for (size_t i = 0; i < hex.size(); i++) { |
| int val = 0; |
| switch (hex[i]) { |
| // clang-format off |
| case ' ': case '-': case ':': continue; |
| case 'f': case 'F': val = 15; break; |
| case 'e': case 'E': val = 14; break; |
| case 'd': case 'D': val = 13; break; |
| case 'c': case 'C': val = 12; break; |
| case 'b': case 'B': val = 11; break; |
| case 'a': case 'A': val = 10; break; |
| case '9': val = 9; break; |
| case '8': val = 8; break; |
| case '7': val = 7; break; |
| case '6': val = 6; break; |
| case '5': val = 5; break; |
| case '4': val = 4; break; |
| case '3': val = 3; break; |
| case '2': val = 2; break; |
| case '1': val = 1; break; |
| case '0': val = 0; break; |
| default: return -EINVAL; |
| // clang-format on |
| } |
| |
| if (even) { |
| cur = val << 4; |
| } else { |
| cur += val; |
| str.push_back(cur); |
| cur = 0; |
| } |
| even = !even; |
| } |
| return even ? OK : -EINVAL; |
| } |
| |
| static const char* kLookup = "0123456789abcdef"; |
| |
| status_t StrToHex(const std::string& str, std::string& hex) { |
| hex.clear(); |
| for (size_t i = 0; i < str.size(); i++) { |
| hex.push_back(kLookup[(str[i] & 0xF0) >> 4]); |
| hex.push_back(kLookup[str[i] & 0x0F]); |
| } |
| return OK; |
| } |
| |
| status_t StrToHex(const KeyBuffer& str, KeyBuffer& hex) { |
| hex.clear(); |
| for (size_t i = 0; i < str.size(); i++) { |
| hex.push_back(kLookup[(str.data()[i] & 0xF0) >> 4]); |
| hex.push_back(kLookup[str.data()[i] & 0x0F]); |
| } |
| return OK; |
| } |
| |
| status_t NormalizeHex(const std::string& in, std::string& out) { |
| std::string tmp; |
| if (HexToStr(in, tmp)) { |
| return -EINVAL; |
| } |
| return StrToHex(tmp, out); |
| } |
| |
| status_t GetBlockDevSize(int fd, uint64_t* size) { |
| if (ioctl(fd, BLKGETSIZE64, size)) { |
| return -errno; |
| } |
| |
| return OK; |
| } |
| |
| status_t GetBlockDevSize(const std::string& path, uint64_t* size) { |
| int fd = open(path.c_str(), O_RDONLY | O_CLOEXEC); |
| status_t res = OK; |
| |
| if (fd < 0) { |
| return -errno; |
| } |
| |
| res = GetBlockDevSize(fd, size); |
| |
| close(fd); |
| |
| return res; |
| } |
| |
| status_t GetBlockDev512Sectors(const std::string& path, uint64_t* nr_sec) { |
| uint64_t size; |
| status_t res = GetBlockDevSize(path, &size); |
| |
| if (res != OK) { |
| return res; |
| } |
| |
| *nr_sec = size / 512; |
| |
| return OK; |
| } |
| |
| uint64_t GetFreeBytes(const std::string& path) { |
| struct statvfs sb; |
| if (statvfs(path.c_str(), &sb) == 0) { |
| return (uint64_t)sb.f_bavail * sb.f_frsize; |
| } else { |
| return -1; |
| } |
| } |
| |
| // TODO: borrowed from frameworks/native/libs/diskusage/ which should |
| // eventually be migrated into system/ |
| static int64_t stat_size(struct stat* s) { |
| int64_t blksize = s->st_blksize; |
| // count actual blocks used instead of nominal file size |
| int64_t size = s->st_blocks * 512; |
| |
| if (blksize) { |
| /* round up to filesystem block size */ |
| size = (size + blksize - 1) & (~(blksize - 1)); |
| } |
| |
| return size; |
| } |
| |
| // TODO: borrowed from frameworks/native/libs/diskusage/ which should |
| // eventually be migrated into system/ |
| int64_t calculate_dir_size(int dfd) { |
| int64_t size = 0; |
| struct stat s; |
| DIR* d; |
| struct dirent* de; |
| |
| d = fdopendir(dfd); |
| if (d == NULL) { |
| close(dfd); |
| return 0; |
| } |
| |
| while ((de = readdir(d))) { |
| const char* name = de->d_name; |
| if (fstatat(dfd, name, &s, AT_SYMLINK_NOFOLLOW) == 0) { |
| size += stat_size(&s); |
| } |
| if (de->d_type == DT_DIR) { |
| int subfd; |
| |
| /* always skip "." and ".." */ |
| if (IsDotOrDotDot(*de)) continue; |
| |
| subfd = openat(dfd, name, O_RDONLY | O_DIRECTORY | O_CLOEXEC); |
| if (subfd >= 0) { |
| size += calculate_dir_size(subfd); |
| } |
| } |
| } |
| closedir(d); |
| return size; |
| } |
| |
| uint64_t GetTreeBytes(const std::string& path) { |
| int dirfd = open(path.c_str(), O_RDONLY | O_DIRECTORY | O_CLOEXEC); |
| if (dirfd < 0) { |
| PLOG(WARNING) << "Failed to open " << path; |
| return -1; |
| } else { |
| return calculate_dir_size(dirfd); |
| } |
| } |
| |
| // TODO: Use a better way to determine if it's media provider app. |
| bool IsFuseDaemon(const pid_t pid) { |
| auto path = StringPrintf("/proc/%d/mounts", pid); |
| char* tmp; |
| if (lgetfilecon(path.c_str(), &tmp) < 0) { |
| return false; |
| } |
| bool result = android::base::StartsWith(tmp, kMediaProviderAppCtx) |
| || android::base::StartsWith(tmp, kMediaProviderCtx); |
| freecon(tmp); |
| return result; |
| } |
| |
| bool IsFilesystemSupported(const std::string& fsType) { |
| std::string supported; |
| if (!ReadFileToString(kProcFilesystems, &supported)) { |
| PLOG(ERROR) << "Failed to read supported filesystems"; |
| return false; |
| } |
| return supported.find(fsType + "\n") != std::string::npos; |
| } |
| |
| bool IsSdcardfsUsed() { |
| return IsFilesystemSupported("sdcardfs") && |
| base::GetBoolProperty(kExternalStorageSdcardfs, true); |
| } |
| |
| status_t WipeBlockDevice(const std::string& path) { |
| status_t res = -1; |
| const char* c_path = path.c_str(); |
| uint64_t range[2] = {0, 0}; |
| |
| int fd = TEMP_FAILURE_RETRY(open(c_path, O_RDWR | O_CLOEXEC)); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open " << path; |
| goto done; |
| } |
| |
| if (GetBlockDevSize(fd, &range[1]) != OK) { |
| PLOG(ERROR) << "Failed to determine size of " << path; |
| goto done; |
| } |
| |
| LOG(INFO) << "About to discard " << range[1] << " on " << path; |
| if (ioctl(fd, BLKDISCARD, &range) == 0) { |
| LOG(INFO) << "Discard success on " << path; |
| res = 0; |
| } else { |
| PLOG(ERROR) << "Discard failure on " << path; |
| } |
| |
| done: |
| close(fd); |
| return res; |
| } |
| |
| static bool isValidFilename(const std::string& name) { |
| if (name.empty() || (name == ".") || (name == "..") || (name.find('/') != std::string::npos)) { |
| return false; |
| } else { |
| return true; |
| } |
| } |
| |
| std::string BuildKeyPath(const std::string& partGuid) { |
| return StringPrintf("%s/expand_%s.key", kKeyPath, partGuid.c_str()); |
| } |
| |
| std::string BuildDataSystemLegacyPath(userid_t userId) { |
| return StringPrintf("%s/system/users/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataSystemCePath(userid_t userId) { |
| return StringPrintf("%s/system_ce/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataSystemDePath(userid_t userId) { |
| return StringPrintf("%s/system_de/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataMiscLegacyPath(userid_t userId) { |
| return StringPrintf("%s/misc/user/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataMiscCePath(userid_t userId) { |
| return StringPrintf("%s/misc_ce/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataMiscDePath(userid_t userId) { |
| return StringPrintf("%s/misc_de/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| // Keep in sync with installd (frameworks/native/cmds/installd/utils.h) |
| std::string BuildDataProfilesDePath(userid_t userId) { |
| return StringPrintf("%s/misc/profiles/cur/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataVendorCePath(userid_t userId) { |
| return StringPrintf("%s/vendor_ce/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataVendorDePath(userid_t userId) { |
| return StringPrintf("%s/vendor_de/%u", BuildDataPath("").c_str(), userId); |
| } |
| |
| std::string BuildDataPath(const std::string& volumeUuid) { |
| // TODO: unify with installd path generation logic |
| if (volumeUuid.empty()) { |
| return "/data"; |
| } else { |
| CHECK(isValidFilename(volumeUuid)); |
| return StringPrintf("/mnt/expand/%s", volumeUuid.c_str()); |
| } |
| } |
| |
| std::string BuildDataMediaCePath(const std::string& volumeUuid, userid_t userId) { |
| // TODO: unify with installd path generation logic |
| std::string data(BuildDataPath(volumeUuid)); |
| return StringPrintf("%s/media/%u", data.c_str(), userId); |
| } |
| |
| std::string BuildDataUserCePath(const std::string& volumeUuid, userid_t userId) { |
| // TODO: unify with installd path generation logic |
| std::string data(BuildDataPath(volumeUuid)); |
| if (volumeUuid.empty() && userId == 0) { |
| std::string legacy = StringPrintf("%s/data", data.c_str()); |
| struct stat sb; |
| if (lstat(legacy.c_str(), &sb) == 0 && S_ISDIR(sb.st_mode)) { |
| /* /data/data is dir, return /data/data for legacy system */ |
| return legacy; |
| } |
| } |
| return StringPrintf("%s/user/%u", data.c_str(), userId); |
| } |
| |
| std::string BuildDataUserDePath(const std::string& volumeUuid, userid_t userId) { |
| // TODO: unify with installd path generation logic |
| std::string data(BuildDataPath(volumeUuid)); |
| return StringPrintf("%s/user_de/%u", data.c_str(), userId); |
| } |
| |
| dev_t GetDevice(const std::string& path) { |
| struct stat sb; |
| if (stat(path.c_str(), &sb)) { |
| PLOG(WARNING) << "Failed to stat " << path; |
| return 0; |
| } else { |
| return sb.st_dev; |
| } |
| } |
| |
| // Returns true if |path1| names the same existing file or directory as |path2|. |
| bool IsSameFile(const std::string& path1, const std::string& path2) { |
| struct stat stbuf1, stbuf2; |
| if (stat(path1.c_str(), &stbuf1) != 0 || stat(path2.c_str(), &stbuf2) != 0) return false; |
| return stbuf1.st_ino == stbuf2.st_ino && stbuf1.st_dev == stbuf2.st_dev; |
| } |
| |
| status_t RestoreconRecursive(const std::string& path) { |
| LOG(DEBUG) << "Starting restorecon of " << path; |
| |
| static constexpr const char* kRestoreconString = "selinux.restorecon_recursive"; |
| |
| android::base::SetProperty(kRestoreconString, ""); |
| android::base::SetProperty(kRestoreconString, path); |
| |
| android::base::WaitForProperty(kRestoreconString, path); |
| |
| LOG(DEBUG) << "Finished restorecon of " << path; |
| return OK; |
| } |
| |
| bool Readlinkat(int dirfd, const std::string& path, std::string* result) { |
| // Shamelessly borrowed from android::base::Readlink() |
| result->clear(); |
| |
| // Most Linux file systems (ext2 and ext4, say) limit symbolic links to |
| // 4095 bytes. Since we'll copy out into the string anyway, it doesn't |
| // waste memory to just start there. We add 1 so that we can recognize |
| // whether it actually fit (rather than being truncated to 4095). |
| std::vector<char> buf(4095 + 1); |
| while (true) { |
| ssize_t size = readlinkat(dirfd, path.c_str(), &buf[0], buf.size()); |
| // Unrecoverable error? |
| if (size == -1) return false; |
| // It fit! (If size == buf.size(), it may have been truncated.) |
| if (static_cast<size_t>(size) < buf.size()) { |
| result->assign(&buf[0], size); |
| return true; |
| } |
| // Double our buffer and try again. |
| buf.resize(buf.size() * 2); |
| } |
| } |
| |
| static unsigned int GetMajorBlockVirtioBlk() { |
| std::string devices; |
| if (!ReadFileToString(kProcDevices, &devices)) { |
| PLOG(ERROR) << "Unable to open /proc/devices"; |
| return 0; |
| } |
| |
| bool blockSection = false; |
| for (auto line : android::base::Split(devices, "\n")) { |
| if (line == "Block devices:") { |
| blockSection = true; |
| } else if (line == "Character devices:") { |
| blockSection = false; |
| } else if (blockSection) { |
| auto tokens = android::base::Split(line, " "); |
| if (tokens.size() == 2 && tokens[1] == "virtblk") { |
| return std::stoul(tokens[0]); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| bool IsVirtioBlkDevice(unsigned int major) { |
| // Most virtualized platforms expose block devices with the virtio-blk |
| // block device driver. Unfortunately, this driver does not use a fixed |
| // major number, but relies on the kernel to assign one from a specific |
| // range of block majors, which are allocated for "LOCAL/EXPERIMENAL USE" |
| // per Documentation/devices.txt. This is true even for the latest Linux |
| // kernel (4.4; see init() in drivers/block/virtio_blk.c). |
| static unsigned int kMajorBlockVirtioBlk = GetMajorBlockVirtioBlk(); |
| return kMajorBlockVirtioBlk && major == kMajorBlockVirtioBlk; |
| } |
| |
| static status_t findMountPointsWithPrefix(const std::string& prefix, |
| std::list<std::string>& mountPoints) { |
| // Add a trailing slash if the client didn't provide one so that we don't match /foo/barbaz |
| // when the prefix is /foo/bar |
| std::string prefixWithSlash(prefix); |
| if (prefix.back() != '/') { |
| android::base::StringAppendF(&prefixWithSlash, "/"); |
| } |
| |
| std::unique_ptr<FILE, int (*)(FILE*)> mnts(setmntent("/proc/mounts", "re"), endmntent); |
| if (!mnts) { |
| PLOG(ERROR) << "Unable to open /proc/mounts"; |
| return -errno; |
| } |
| |
| // Some volumes can be stacked on each other, so force unmount in |
| // reverse order to give us the best chance of success. |
| struct mntent* mnt; // getmntent returns a thread local, so it's safe. |
| while ((mnt = getmntent(mnts.get())) != nullptr) { |
| auto mountPoint = std::string(mnt->mnt_dir) + "/"; |
| if (android::base::StartsWith(mountPoint, prefixWithSlash)) { |
| mountPoints.push_front(mountPoint); |
| } |
| } |
| return OK; |
| } |
| |
| // Unmount all mountpoints that start with prefix. prefix itself doesn't need to be a mountpoint. |
| status_t UnmountTreeWithPrefix(const std::string& prefix) { |
| std::list<std::string> toUnmount; |
| status_t result = findMountPointsWithPrefix(prefix, toUnmount); |
| if (result < 0) { |
| return result; |
| } |
| for (const auto& path : toUnmount) { |
| if (umount2(path.c_str(), MNT_DETACH)) { |
| PLOG(ERROR) << "Failed to unmount " << path; |
| result = -errno; |
| } |
| } |
| return result; |
| } |
| |
| status_t UnmountTree(const std::string& mountPoint) { |
| if (TEMP_FAILURE_RETRY(umount2(mountPoint.c_str(), MNT_DETACH)) < 0 && errno != EINVAL && |
| errno != ENOENT) { |
| PLOG(ERROR) << "Failed to unmount " << mountPoint; |
| return -errno; |
| } |
| return OK; |
| } |
| |
| bool IsDotOrDotDot(const struct dirent& ent) { |
| return strcmp(ent.d_name, ".") == 0 || strcmp(ent.d_name, "..") == 0; |
| } |
| |
| static status_t delete_dir_contents(DIR* dir) { |
| // Shamelessly borrowed from android::installd |
| int dfd = dirfd(dir); |
| if (dfd < 0) { |
| return -errno; |
| } |
| |
| status_t result = OK; |
| struct dirent* de; |
| while ((de = readdir(dir))) { |
| const char* name = de->d_name; |
| if (de->d_type == DT_DIR) { |
| /* always skip "." and ".." */ |
| if (IsDotOrDotDot(*de)) continue; |
| |
| android::base::unique_fd subfd( |
| openat(dfd, name, O_RDONLY | O_DIRECTORY | O_NOFOLLOW | O_CLOEXEC)); |
| if (subfd.get() == -1) { |
| PLOG(ERROR) << "Couldn't openat " << name; |
| result = -errno; |
| continue; |
| } |
| std::unique_ptr<DIR, decltype(&closedir)> subdirp( |
| android::base::Fdopendir(std::move(subfd)), closedir); |
| if (!subdirp) { |
| PLOG(ERROR) << "Couldn't fdopendir " << name; |
| result = -errno; |
| continue; |
| } |
| result = delete_dir_contents(subdirp.get()); |
| if (unlinkat(dfd, name, AT_REMOVEDIR) < 0) { |
| PLOG(ERROR) << "Couldn't unlinkat " << name; |
| result = -errno; |
| } |
| } else { |
| if (unlinkat(dfd, name, 0) < 0) { |
| PLOG(ERROR) << "Couldn't unlinkat " << name; |
| result = -errno; |
| } |
| } |
| } |
| return result; |
| } |
| |
| status_t DeleteDirContentsAndDir(const std::string& pathname) { |
| status_t res = DeleteDirContents(pathname); |
| if (res < 0) { |
| return res; |
| } |
| if (TEMP_FAILURE_RETRY(rmdir(pathname.c_str())) < 0 && errno != ENOENT) { |
| PLOG(ERROR) << "rmdir failed on " << pathname; |
| return -errno; |
| } |
| LOG(VERBOSE) << "Success: rmdir on " << pathname; |
| return OK; |
| } |
| |
| status_t DeleteDirContents(const std::string& pathname) { |
| // Shamelessly borrowed from android::installd |
| std::unique_ptr<DIR, decltype(&closedir)> dirp(opendir(pathname.c_str()), closedir); |
| if (!dirp) { |
| if (errno == ENOENT) { |
| return OK; |
| } |
| PLOG(ERROR) << "Failed to opendir " << pathname; |
| return -errno; |
| } |
| return delete_dir_contents(dirp.get()); |
| } |
| |
| // TODO(118708649): fix duplication with init/util.h |
| status_t WaitForFile(const char* filename, std::chrono::nanoseconds timeout) { |
| android::base::Timer t; |
| while (t.duration() < timeout) { |
| struct stat sb; |
| if (stat(filename, &sb) != -1) { |
| LOG(INFO) << "wait for '" << filename << "' took " << t; |
| return 0; |
| } |
| std::this_thread::sleep_for(10ms); |
| } |
| LOG(WARNING) << "wait for '" << filename << "' timed out and took " << t; |
| return -1; |
| } |
| |
| bool pathExists(const std::string& path) { |
| return access(path.c_str(), F_OK) == 0; |
| } |
| |
| bool FsyncDirectory(const std::string& dirname) { |
| android::base::unique_fd fd(TEMP_FAILURE_RETRY(open(dirname.c_str(), O_RDONLY | O_CLOEXEC))); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open " << dirname; |
| return false; |
| } |
| if (fsync(fd) == -1) { |
| if (errno == EROFS || errno == EINVAL) { |
| PLOG(WARNING) << "Skip fsync " << dirname |
| << " on a file system does not support synchronization"; |
| } else { |
| PLOG(ERROR) << "Failed to fsync " << dirname; |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| bool FsyncParentDirectory(const std::string& path) { |
| return FsyncDirectory(android::base::Dirname(path)); |
| } |
| |
| // Creates all parent directories of |path| that don't already exist. Assigns |
| // the specified |mode| to any new directories, and also fsync()s their parent |
| // directories so that the new directories get written to disk right away. |
| bool MkdirsSync(const std::string& path, mode_t mode) { |
| if (path[0] != '/') { |
| LOG(ERROR) << "MkdirsSync() needs an absolute path, but got " << path; |
| return false; |
| } |
| std::vector<std::string> components = android::base::Split(android::base::Dirname(path), "/"); |
| |
| std::string current_dir = "/"; |
| for (const std::string& component : components) { |
| if (component.empty()) continue; |
| |
| std::string parent_dir = current_dir; |
| if (current_dir != "/") current_dir += "/"; |
| current_dir += component; |
| |
| if (!pathExists(current_dir)) { |
| if (mkdir(current_dir.c_str(), mode) != 0) { |
| PLOG(ERROR) << "Failed to create " << current_dir; |
| return false; |
| } |
| if (!FsyncDirectory(parent_dir)) return false; |
| LOG(DEBUG) << "Created directory " << current_dir; |
| } |
| } |
| return true; |
| } |
| |
| bool writeStringToFile(const std::string& payload, const std::string& filename) { |
| android::base::unique_fd fd(TEMP_FAILURE_RETRY( |
| open(filename.c_str(), O_WRONLY | O_CREAT | O_NOFOLLOW | O_TRUNC | O_CLOEXEC, 0666))); |
| if (fd == -1) { |
| PLOG(ERROR) << "Failed to open " << filename; |
| return false; |
| } |
| if (!android::base::WriteStringToFd(payload, fd)) { |
| PLOG(ERROR) << "Failed to write to " << filename; |
| unlink(filename.c_str()); |
| return false; |
| } |
| // fsync as close won't guarantee flush data |
| // see close(2), fsync(2) and b/68901441 |
| if (fsync(fd) == -1) { |
| if (errno == EROFS || errno == EINVAL) { |
| PLOG(WARNING) << "Skip fsync " << filename |
| << " on a file system does not support synchronization"; |
| } else { |
| PLOG(ERROR) << "Failed to fsync " << filename; |
| unlink(filename.c_str()); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| status_t AbortFuseConnections() { |
| namespace fs = std::filesystem; |
| |
| for (const auto& itEntry : fs::directory_iterator("/sys/fs/fuse/connections")) { |
| std::string abortPath = itEntry.path().string() + "/abort"; |
| LOG(DEBUG) << "Aborting fuse connection entry " << abortPath; |
| bool ret = writeStringToFile("1", abortPath); |
| if (!ret) { |
| LOG(WARNING) << "Failed to write to " << abortPath; |
| } |
| } |
| |
| return OK; |
| } |
| |
| status_t EnsureDirExists(const std::string& path, mode_t mode, uid_t uid, gid_t gid) { |
| if (access(path.c_str(), F_OK) != 0) { |
| PLOG(WARNING) << "Dir does not exist: " << path; |
| if (fs_prepare_dir(path.c_str(), mode, uid, gid) != 0) { |
| return -errno; |
| } |
| } |
| return OK; |
| } |
| |
| // Gets the sysfs path for parameters of the backing device info (bdi) |
| static std::string getBdiPathForMount(const std::string& mount) { |
| // First figure out MAJOR:MINOR of mount. Simplest way is to stat the path. |
| struct stat info; |
| if (stat(mount.c_str(), &info) != 0) { |
| PLOG(ERROR) << "Failed to stat " << mount; |
| return ""; |
| } |
| unsigned int maj = major(info.st_dev); |
| unsigned int min = minor(info.st_dev); |
| |
| return StringPrintf("/sys/class/bdi/%u:%u", maj, min); |
| } |
| |
| // Configures max_ratio for the FUSE filesystem. |
| void ConfigureMaxDirtyRatioForFuse(const std::string& fuse_mount, unsigned int max_ratio) { |
| LOG(INFO) << "Configuring max_ratio of " << fuse_mount << " fuse filesystem to " << max_ratio; |
| if (max_ratio > 100) { |
| LOG(ERROR) << "Invalid max_ratio: " << max_ratio; |
| return; |
| } |
| std::string fuseBdiPath = getBdiPathForMount(fuse_mount); |
| if (fuseBdiPath == "") { |
| return; |
| } |
| std::string max_ratio_file = StringPrintf("%s/max_ratio", fuseBdiPath.c_str()); |
| unique_fd fd(TEMP_FAILURE_RETRY(open(max_ratio_file.c_str(), O_WRONLY | O_CLOEXEC))); |
| if (fd.get() == -1) { |
| PLOG(ERROR) << "Failed to open " << max_ratio_file; |
| return; |
| } |
| LOG(INFO) << "Writing " << max_ratio << " to " << max_ratio_file; |
| if (!WriteStringToFd(std::to_string(max_ratio), fd)) { |
| PLOG(ERROR) << "Failed to write to " << max_ratio_file; |
| } |
| } |
| |
| // Configures read ahead property of the fuse filesystem with the mount point |fuse_mount| by |
| // writing |read_ahead_kb| to the /sys/class/bdi/MAJOR:MINOR/read_ahead_kb. |
| void ConfigureReadAheadForFuse(const std::string& fuse_mount, size_t read_ahead_kb) { |
| LOG(INFO) << "Configuring read_ahead of " << fuse_mount << " fuse filesystem to " |
| << read_ahead_kb << "kb"; |
| std::string fuseBdiPath = getBdiPathForMount(fuse_mount); |
| if (fuseBdiPath == "") { |
| return; |
| } |
| // We found the bdi path for our filesystem, time to configure read ahead! |
| std::string read_ahead_file = StringPrintf("%s/read_ahead_kb", fuseBdiPath.c_str()); |
| unique_fd fd(TEMP_FAILURE_RETRY(open(read_ahead_file.c_str(), O_WRONLY | O_CLOEXEC))); |
| if (fd.get() == -1) { |
| PLOG(ERROR) << "Failed to open " << read_ahead_file; |
| return; |
| } |
| LOG(INFO) << "Writing " << read_ahead_kb << " to " << read_ahead_file; |
| if (!WriteStringToFd(std::to_string(read_ahead_kb), fd)) { |
| PLOG(ERROR) << "Failed to write to " << read_ahead_file; |
| } |
| } |
| |
| status_t MountUserFuse(userid_t user_id, const std::string& absolute_lower_path, |
| const std::string& relative_upper_path, android::base::unique_fd* fuse_fd) { |
| std::string pre_fuse_path(StringPrintf("/mnt/user/%d", user_id)); |
| std::string fuse_path( |
| StringPrintf("%s/%s", pre_fuse_path.c_str(), relative_upper_path.c_str())); |
| |
| std::string pre_pass_through_path(StringPrintf("/mnt/pass_through/%d", user_id)); |
| std::string pass_through_path( |
| StringPrintf("%s/%s", pre_pass_through_path.c_str(), relative_upper_path.c_str())); |
| |
| // Ensure that /mnt/user is 0700. With FUSE, apps don't need access to /mnt/user paths directly. |
| // Without FUSE however, apps need /mnt/user access so /mnt/user in init.rc is 0755 until here |
| auto result = PrepareDir("/mnt/user", 0750, AID_ROOT, AID_MEDIA_RW); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory /mnt/user"; |
| return -1; |
| } |
| |
| // Shell is neither AID_ROOT nor AID_EVERYBODY. Since it equally needs 'execute' access to |
| // /mnt/user/0 to 'adb shell ls /sdcard' for instance, we set the uid bit of /mnt/user/0 to |
| // AID_SHELL. This gives shell access along with apps running as group everybody (user 0 apps) |
| // These bits should be consistent with what is set in zygote in |
| // com_android_internal_os_Zygote#MountEmulatedStorage on volume bind mount during app fork |
| result = PrepareDir(pre_fuse_path, 0710, user_id ? AID_ROOT : AID_SHELL, |
| multiuser_get_uid(user_id, AID_EVERYBODY)); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory " << pre_fuse_path; |
| return -1; |
| } |
| |
| result = PrepareDir(fuse_path, 0700, AID_ROOT, AID_ROOT); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory " << fuse_path; |
| return -1; |
| } |
| |
| result = PrepareDir(pre_pass_through_path, 0710, AID_ROOT, AID_MEDIA_RW); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory " << pre_pass_through_path; |
| return -1; |
| } |
| |
| result = PrepareDir(pass_through_path, 0710, AID_ROOT, AID_MEDIA_RW); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory " << pass_through_path; |
| return -1; |
| } |
| |
| if (relative_upper_path == "emulated") { |
| std::string linkpath(StringPrintf("/mnt/user/%d/self", user_id)); |
| result = PrepareDir(linkpath, 0755, AID_ROOT, AID_ROOT); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory " << linkpath; |
| return -1; |
| } |
| linkpath += "/primary"; |
| Symlink("/storage/emulated/" + std::to_string(user_id), linkpath); |
| |
| std::string pass_through_linkpath(StringPrintf("/mnt/pass_through/%d/self", user_id)); |
| result = PrepareDir(pass_through_linkpath, 0710, AID_ROOT, AID_MEDIA_RW); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory " << pass_through_linkpath; |
| return -1; |
| } |
| pass_through_linkpath += "/primary"; |
| Symlink("/storage/emulated/" + std::to_string(user_id), pass_through_linkpath); |
| } |
| |
| // Open fuse fd. |
| fuse_fd->reset(open("/dev/fuse", O_RDWR | O_CLOEXEC)); |
| if (fuse_fd->get() == -1) { |
| PLOG(ERROR) << "Failed to open /dev/fuse"; |
| return -1; |
| } |
| |
| // Note: leaving out default_permissions since we don't want kernel to do lower filesystem |
| // permission checks before routing to FUSE daemon. |
| const auto opts = StringPrintf( |
| "fd=%i," |
| "rootmode=40000," |
| "allow_other," |
| "user_id=0,group_id=0,", |
| fuse_fd->get()); |
| |
| result = TEMP_FAILURE_RETRY(mount("/dev/fuse", fuse_path.c_str(), "fuse", |
| MS_NOSUID | MS_NODEV | MS_NOEXEC | MS_NOATIME | MS_LAZYTIME, |
| opts.c_str())); |
| if (result != 0) { |
| PLOG(ERROR) << "Failed to mount " << fuse_path; |
| return -errno; |
| } |
| |
| if (IsSdcardfsUsed()) { |
| std::string sdcardfs_path( |
| StringPrintf("/mnt/runtime/full/%s", relative_upper_path.c_str())); |
| |
| LOG(INFO) << "Bind mounting " << sdcardfs_path << " to " << pass_through_path; |
| return BindMount(sdcardfs_path, pass_through_path); |
| } else { |
| LOG(INFO) << "Bind mounting " << absolute_lower_path << " to " << pass_through_path; |
| return BindMount(absolute_lower_path, pass_through_path); |
| } |
| } |
| |
| status_t UnmountUserFuse(userid_t user_id, const std::string& absolute_lower_path, |
| const std::string& relative_upper_path) { |
| std::string fuse_path(StringPrintf("/mnt/user/%d/%s", user_id, relative_upper_path.c_str())); |
| std::string pass_through_path( |
| StringPrintf("/mnt/pass_through/%d/%s", user_id, relative_upper_path.c_str())); |
| |
| LOG(INFO) << "Unmounting fuse path " << fuse_path; |
| android::status_t result = ForceUnmount(fuse_path); |
| if (result != android::OK) { |
| // TODO(b/135341433): MNT_DETACH is needed for fuse because umount2 can fail with EBUSY. |
| // Figure out why we get EBUSY and remove this special casing if possible. |
| PLOG(ERROR) << "Failed to unmount. Trying MNT_DETACH " << fuse_path << " ..."; |
| if (umount2(fuse_path.c_str(), UMOUNT_NOFOLLOW | MNT_DETACH) && errno != EINVAL && |
| errno != ENOENT) { |
| PLOG(ERROR) << "Failed to unmount with MNT_DETACH " << fuse_path; |
| return -errno; |
| } |
| result = android::OK; |
| } |
| rmdir(fuse_path.c_str()); |
| |
| LOG(INFO) << "Unmounting pass_through_path " << pass_through_path; |
| auto status = ForceUnmount(pass_through_path); |
| if (status != android::OK) { |
| LOG(ERROR) << "Failed to unmount " << pass_through_path; |
| } |
| rmdir(pass_through_path.c_str()); |
| |
| return result; |
| } |
| |
| status_t PrepareAndroidDirs(const std::string& volumeRoot) { |
| std::string androidDir = volumeRoot + kAndroidDir; |
| std::string androidDataDir = volumeRoot + kAppDataDir; |
| std::string androidObbDir = volumeRoot + kAppObbDir; |
| std::string androidMediaDir = volumeRoot + kAppMediaDir; |
| |
| bool useSdcardFs = IsSdcardfsUsed(); |
| |
| // mode 0771 + sticky bit for inheriting GIDs |
| mode_t mode = S_IRWXU | S_IRWXG | S_IXOTH | S_ISGID; |
| if (fs_prepare_dir(androidDir.c_str(), mode, AID_MEDIA_RW, AID_MEDIA_RW) != 0) { |
| PLOG(ERROR) << "Failed to create " << androidDir; |
| return -errno; |
| } |
| |
| gid_t dataGid = useSdcardFs ? AID_MEDIA_RW : AID_EXT_DATA_RW; |
| if (fs_prepare_dir(androidDataDir.c_str(), mode, AID_MEDIA_RW, dataGid) != 0) { |
| PLOG(ERROR) << "Failed to create " << androidDataDir; |
| return -errno; |
| } |
| |
| gid_t obbGid = useSdcardFs ? AID_MEDIA_RW : AID_EXT_OBB_RW; |
| if (fs_prepare_dir(androidObbDir.c_str(), mode, AID_MEDIA_RW, obbGid) != 0) { |
| PLOG(ERROR) << "Failed to create " << androidObbDir; |
| return -errno; |
| } |
| // Some other apps, like installers, have write access to the OBB directory |
| // to pre-download them. To make sure newly created folders in this directory |
| // have the right permissions, set a default ACL. |
| SetDefaultAcl(androidObbDir, mode, AID_MEDIA_RW, obbGid, {}); |
| |
| if (fs_prepare_dir(androidMediaDir.c_str(), mode, AID_MEDIA_RW, AID_MEDIA_RW) != 0) { |
| PLOG(ERROR) << "Failed to create " << androidMediaDir; |
| return -errno; |
| } |
| |
| return OK; |
| } |
| } // namespace vold |
| } // namespace android |