| /* |
| * Copyright (C) 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_VOLD_UTILS_H |
| #define ANDROID_VOLD_UTILS_H |
| |
| #include "KeyBuffer.h" |
| |
| #include <android-base/macros.h> |
| #include <android-base/unique_fd.h> |
| #include <cutils/multiuser.h> |
| #include <selinux/selinux.h> |
| #include <utils/Errors.h> |
| |
| #include <chrono> |
| #include <string> |
| #include <vector> |
| |
| struct DIR; |
| |
| namespace android { |
| namespace vold { |
| |
| static const char* kVoldAppDataIsolationEnabled = "persist.sys.vold_app_data_isolation_enabled"; |
| static const char* kExternalStorageSdcardfs = "external_storage.sdcardfs.enabled"; |
| |
| /* SELinux contexts used depending on the block device type */ |
| extern security_context_t sBlkidContext; |
| extern security_context_t sBlkidUntrustedContext; |
| extern security_context_t sFsckContext; |
| extern security_context_t sFsckUntrustedContext; |
| |
| // TODO remove this with better solution, b/64143519 |
| extern bool sSleepOnUnmount; |
| |
| std::string GetFuseMountPathForUser(userid_t user_id, const std::string& relative_upper_path); |
| |
| status_t CreateDeviceNode(const std::string& path, dev_t dev); |
| status_t DestroyDeviceNode(const std::string& path); |
| |
| status_t AbortFuseConnections(); |
| |
| int SetQuotaInherit(const std::string& path); |
| int SetQuotaProjectId(const std::string& path, long projectId); |
| /* |
| * Creates and sets up an application-specific path on external |
| * storage with the correct ACL and project ID (if needed). |
| * |
| * ONLY for use with app-specific data directories on external storage! |
| * (eg, /Android/data/com.foo, /Android/obb/com.foo, etc.) |
| */ |
| int PrepareAppDirFromRoot(const std::string& path, const std::string& root, int appUid, |
| bool fixupExisting); |
| |
| /* fs_prepare_dir wrapper that creates with SELinux context */ |
| status_t PrepareDir(const std::string& path, mode_t mode, uid_t uid, gid_t gid, |
| unsigned int attrs = 0); |
| |
| /* Really unmounts the path, killing active processes along the way */ |
| status_t ForceUnmount(const std::string& path); |
| |
| /* Kills any processes using given path */ |
| status_t KillProcessesUsingPath(const std::string& path); |
| |
| /* Kills any processes using given mount prifix */ |
| status_t KillProcessesWithMountPrefix(const std::string& path); |
| |
| /* Creates bind mount from source to target */ |
| status_t BindMount(const std::string& source, const std::string& target); |
| |
| /** Creates a symbolic link to target */ |
| status_t Symlink(const std::string& target, const std::string& linkpath); |
| |
| /** Calls unlink(2) at linkpath */ |
| status_t Unlink(const std::string& linkpath); |
| |
| /** Creates the given directory if it is not already available */ |
| status_t CreateDir(const std::string& dir, mode_t mode); |
| |
| bool FindValue(const std::string& raw, const std::string& key, std::string* value); |
| |
| /* Reads filesystem metadata from device at path */ |
| status_t ReadMetadata(const std::string& path, std::string* fsType, std::string* fsUuid, |
| std::string* fsLabel); |
| |
| /* Reads filesystem metadata from untrusted device at path */ |
| status_t ReadMetadataUntrusted(const std::string& path, std::string* fsType, std::string* fsUuid, |
| std::string* fsLabel); |
| |
| /* Returns either WEXITSTATUS() status, or a negative errno */ |
| status_t ForkExecvp(const std::vector<std::string>& args, std::vector<std::string>* output = nullptr, |
| security_context_t context = nullptr); |
| |
| pid_t ForkExecvpAsync(const std::vector<std::string>& args); |
| |
| /* Gets block device size in bytes */ |
| status_t GetBlockDevSize(int fd, uint64_t* size); |
| status_t GetBlockDevSize(const std::string& path, uint64_t* size); |
| /* Gets block device size in 512 byte sectors */ |
| status_t GetBlockDev512Sectors(const std::string& path, uint64_t* nr_sec); |
| |
| status_t ReadRandomBytes(size_t bytes, std::string& out); |
| status_t ReadRandomBytes(size_t bytes, char* buffer); |
| status_t GenerateRandomUuid(std::string& out); |
| |
| /* Converts hex string to raw bytes, ignoring [ :-] */ |
| status_t HexToStr(const std::string& hex, std::string& str); |
| /* Converts raw bytes to hex string */ |
| status_t StrToHex(const std::string& str, std::string& hex); |
| /* Converts raw key bytes to hex string */ |
| status_t StrToHex(const KeyBuffer& str, KeyBuffer& hex); |
| /* Normalize given hex string into consistent format */ |
| status_t NormalizeHex(const std::string& in, std::string& out); |
| |
| uint64_t GetFreeBytes(const std::string& path); |
| uint64_t GetTreeBytes(const std::string& path); |
| |
| bool IsFilesystemSupported(const std::string& fsType); |
| bool IsSdcardfsUsed(); |
| bool IsFuseDaemon(const pid_t pid); |
| |
| /* Wipes contents of block device at given path */ |
| status_t WipeBlockDevice(const std::string& path); |
| |
| std::string BuildKeyPath(const std::string& partGuid); |
| |
| std::string BuildDataSystemLegacyPath(userid_t userid); |
| std::string BuildDataSystemCePath(userid_t userid); |
| std::string BuildDataSystemDePath(userid_t userid); |
| std::string BuildDataMiscLegacyPath(userid_t userid); |
| std::string BuildDataMiscCePath(userid_t userid); |
| std::string BuildDataMiscDePath(userid_t userid); |
| std::string BuildDataProfilesDePath(userid_t userid); |
| std::string BuildDataVendorCePath(userid_t userid); |
| std::string BuildDataVendorDePath(userid_t userid); |
| |
| std::string BuildDataPath(const std::string& volumeUuid); |
| std::string BuildDataMediaCePath(const std::string& volumeUuid, userid_t userid); |
| std::string BuildDataUserCePath(const std::string& volumeUuid, userid_t userid); |
| std::string BuildDataUserDePath(const std::string& volumeUuid, userid_t userid); |
| |
| dev_t GetDevice(const std::string& path); |
| |
| status_t EnsureDirExists(const std::string& path, mode_t mode, uid_t uid, gid_t gid); |
| |
| status_t RestoreconRecursive(const std::string& path); |
| |
| // TODO: promote to android::base |
| bool Readlinkat(int dirfd, const std::string& path, std::string* result); |
| |
| // Handles dynamic major assignment for virtio-block |
| bool IsVirtioBlkDevice(unsigned int major); |
| |
| status_t UnmountTreeWithPrefix(const std::string& prefix); |
| status_t UnmountTree(const std::string& mountPoint); |
| |
| status_t DeleteDirContentsAndDir(const std::string& pathname); |
| status_t DeleteDirContents(const std::string& pathname); |
| |
| status_t WaitForFile(const char* filename, std::chrono::nanoseconds timeout); |
| |
| bool FsyncDirectory(const std::string& dirname); |
| |
| bool writeStringToFile(const std::string& payload, const std::string& filename); |
| |
| void ConfigureMaxDirtyRatioForFuse(const std::string& fuse_mount, unsigned int max_ratio); |
| |
| void ConfigureReadAheadForFuse(const std::string& fuse_mount, size_t read_ahead_kb); |
| |
| status_t MountUserFuse(userid_t user_id, const std::string& absolute_lower_path, |
| const std::string& relative_upper_path, android::base::unique_fd* fuse_fd); |
| |
| status_t UnmountUserFuse(userid_t userId, const std::string& absolute_lower_path, |
| const std::string& relative_upper_path); |
| |
| status_t PrepareAndroidDirs(const std::string& volumeRoot); |
| } // namespace vold |
| } // namespace android |
| |
| #endif |