| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <dirent.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <fts.h> |
| #include <mntent.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/ioctl.h> |
| #include <sys/mount.h> |
| #include <sys/stat.h> |
| #include <sys/types.h> |
| #include <sys/sysmacros.h> |
| #include <sys/wait.h> |
| #include <unistd.h> |
| |
| #include <linux/kdev_t.h> |
| |
| #define LOG_TAG "Vold" |
| |
| #include <openssl/md5.h> |
| |
| #include <android-base/logging.h> |
| #include <android-base/stringprintf.h> |
| #include <cutils/fs.h> |
| #include <cutils/log.h> |
| |
| #include <selinux/android.h> |
| |
| #include <sysutils/NetlinkEvent.h> |
| |
| #include <private/android_filesystem_config.h> |
| |
| #include "Benchmark.h" |
| #include "model/EmulatedVolume.h" |
| #include "model/ObbVolume.h" |
| #include "VolumeManager.h" |
| #include "NetlinkManager.h" |
| #include "ResponseCode.h" |
| #include "Loop.h" |
| #include "fs/Ext4.h" |
| #include "fs/Vfat.h" |
| #include "Utils.h" |
| #include "Devmapper.h" |
| #include "Process.h" |
| #include "Asec.h" |
| #include "VoldUtil.h" |
| #include "cryptfs.h" |
| |
| #define MASS_STORAGE_FILE_PATH "/sys/class/android_usb/android0/f_mass_storage/lun/file" |
| |
| #define ROUND_UP_POWER_OF_2(number, po2) (((!!((number) & ((1U << (po2)) - 1))) << (po2))\ |
| + ((number) & (~((1U << (po2)) - 1)))) |
| |
| using android::base::StringPrintf; |
| using android::base::unique_fd; |
| |
| /* |
| * Path to external storage where *only* root can access ASEC image files |
| */ |
| const char *VolumeManager::SEC_ASECDIR_EXT = "/mnt/secure/asec"; |
| |
| /* |
| * Path to internal storage where *only* root can access ASEC image files |
| */ |
| const char *VolumeManager::SEC_ASECDIR_INT = "/data/app-asec"; |
| |
| /* |
| * Path to where secure containers are mounted |
| */ |
| const char *VolumeManager::ASECDIR = "/mnt/asec"; |
| |
| /* |
| * Path to where OBBs are mounted |
| */ |
| const char *VolumeManager::LOOPDIR = "/mnt/obb"; |
| |
| bool VolumeManager::shutting_down = false; |
| |
| static const char* kPathUserMount = "/mnt/user"; |
| static const char* kPathVirtualDisk = "/data/misc/vold/virtual_disk"; |
| |
| static const char* kPropVirtualDisk = "persist.sys.virtual_disk"; |
| |
| /* 512MiB is large enough for testing purposes */ |
| static const unsigned int kSizeVirtualDisk = 536870912; |
| |
| static const unsigned int kMajorBlockMmc = 179; |
| static const unsigned int kMajorBlockExperimentalMin = 240; |
| static const unsigned int kMajorBlockExperimentalMax = 254; |
| |
| /* writes superblock at end of file or device given by name */ |
| static int writeSuperBlock(const char* name, struct asec_superblock *sb, unsigned int numImgSectors) { |
| int sbfd = open(name, O_RDWR | O_CLOEXEC); |
| if (sbfd < 0) { |
| SLOGE("Failed to open %s for superblock write (%s)", name, strerror(errno)); |
| return -1; |
| } |
| |
| if (lseek(sbfd, (numImgSectors * 512), SEEK_SET) < 0) { |
| SLOGE("Failed to lseek for superblock (%s)", strerror(errno)); |
| close(sbfd); |
| return -1; |
| } |
| |
| if (write(sbfd, sb, sizeof(struct asec_superblock)) != sizeof(struct asec_superblock)) { |
| SLOGE("Failed to write superblock (%s)", strerror(errno)); |
| close(sbfd); |
| return -1; |
| } |
| close(sbfd); |
| return 0; |
| } |
| |
| static unsigned long adjustSectorNumExt4(unsigned long numSectors) { |
| // Ext4 started to reserve 2% or 4096 clusters, whichever is smaller for |
| // preventing costly operations or unexpected ENOSPC error. |
| // Ext4::format() uses default block size without clustering. |
| unsigned long clusterSectors = 4096 / 512; |
| unsigned long reservedSectors = (numSectors * 2)/100 + (numSectors % 50 > 0); |
| numSectors += reservedSectors > (4096 * clusterSectors) ? (4096 * clusterSectors) : reservedSectors; |
| return ROUND_UP_POWER_OF_2(numSectors, 3); |
| } |
| |
| static unsigned long adjustSectorNumFAT(unsigned long numSectors) { |
| /* |
| * Add some headroom |
| */ |
| unsigned long fatSize = (((numSectors * 4) / 512) + 1) * 2; |
| numSectors += fatSize + 2; |
| /* |
| * FAT is aligned to 32 kb with 512b sectors. |
| */ |
| return ROUND_UP_POWER_OF_2(numSectors, 6); |
| } |
| |
| static int setupLoopDevice(char* buffer, size_t len, const char* asecFileName, const char* idHash, bool debug) { |
| if (Loop::lookupActive(idHash, buffer, len)) { |
| if (Loop::create(idHash, asecFileName, buffer, len)) { |
| SLOGE("ASEC loop device creation failed for %s (%s)", asecFileName, strerror(errno)); |
| return -1; |
| } |
| if (debug) { |
| SLOGD("New loop device created at %s", buffer); |
| } |
| } else { |
| if (debug) { |
| SLOGD("Found active loopback for %s at %s", asecFileName, buffer); |
| } |
| } |
| return 0; |
| } |
| |
| static int setupDevMapperDevice(char* buffer, size_t len, const char* loopDevice, const char* asecFileName, const char* key, const char* idHash , unsigned long numImgSectors, bool* createdDMDevice, bool debug) { |
| if (strcmp(key, "none")) { |
| if (Devmapper::lookupActive(idHash, buffer, len)) { |
| if (Devmapper::create(idHash, loopDevice, key, numImgSectors, |
| buffer, len)) { |
| SLOGE("ASEC device mapping failed for %s (%s)", asecFileName, strerror(errno)); |
| return -1; |
| } |
| if (debug) { |
| SLOGD("New devmapper instance created at %s", buffer); |
| } |
| } else { |
| if (debug) { |
| SLOGD("Found active devmapper for %s at %s", asecFileName, buffer); |
| } |
| } |
| *createdDMDevice = true; |
| } else { |
| strlcpy(buffer, loopDevice, len); |
| *createdDMDevice = false; |
| } |
| return 0; |
| } |
| |
| static void waitForDevMapper(const char *dmDevice) { |
| /* |
| * Wait for the device mapper node to be created. Sometimes it takes a |
| * while. Wait for up to 1 second. We could also inspect incoming uevents, |
| * but that would take more effort. |
| */ |
| int tries = 25; |
| while (tries--) { |
| if (!access(dmDevice, F_OK) || errno != ENOENT) { |
| break; |
| } |
| usleep(40 * 1000); |
| } |
| } |
| |
| VolumeManager *VolumeManager::sInstance = NULL; |
| |
| VolumeManager *VolumeManager::Instance() { |
| if (!sInstance) |
| sInstance = new VolumeManager(); |
| return sInstance; |
| } |
| |
| VolumeManager::VolumeManager() { |
| mDebug = false; |
| mActiveContainers = new AsecIdCollection(); |
| mBroadcaster = NULL; |
| mUmsSharingCount = 0; |
| mSavedDirtyRatio = -1; |
| // set dirty ratio to 0 when UMS is active |
| mUmsDirtyRatio = 0; |
| mNextObbId = 0; |
| } |
| |
| VolumeManager::~VolumeManager() { |
| delete mActiveContainers; |
| } |
| |
| char *VolumeManager::asecHash(const char *id, char *buffer, size_t len) { |
| static const char* digits = "0123456789abcdef"; |
| |
| unsigned char sig[MD5_DIGEST_LENGTH]; |
| |
| if (buffer == NULL) { |
| SLOGE("Destination buffer is NULL"); |
| errno = ESPIPE; |
| return NULL; |
| } else if (id == NULL) { |
| SLOGE("Source buffer is NULL"); |
| errno = ESPIPE; |
| return NULL; |
| } else if (len < MD5_ASCII_LENGTH_PLUS_NULL) { |
| SLOGE("Target hash buffer size < %d bytes (%zu)", |
| MD5_ASCII_LENGTH_PLUS_NULL, len); |
| errno = ESPIPE; |
| return NULL; |
| } |
| |
| MD5(reinterpret_cast<const unsigned char*>(id), strlen(id), sig); |
| |
| char *p = buffer; |
| for (int i = 0; i < MD5_DIGEST_LENGTH; i++) { |
| *p++ = digits[sig[i] >> 4]; |
| *p++ = digits[sig[i] & 0x0F]; |
| } |
| *p = '\0'; |
| |
| return buffer; |
| } |
| |
| int VolumeManager::updateVirtualDisk() { |
| if (property_get_bool(kPropVirtualDisk, false)) { |
| if (access(kPathVirtualDisk, F_OK) != 0) { |
| Loop::createImageFile(kPathVirtualDisk, kSizeVirtualDisk / 512); |
| } |
| |
| if (mVirtualDisk == nullptr) { |
| if (Loop::create(kPathVirtualDisk, mVirtualDiskPath) != 0) { |
| LOG(ERROR) << "Failed to create virtual disk"; |
| return -1; |
| } |
| |
| struct stat buf; |
| if (stat(mVirtualDiskPath.c_str(), &buf) < 0) { |
| PLOG(ERROR) << "Failed to stat " << mVirtualDiskPath; |
| return -1; |
| } |
| |
| auto disk = new android::vold::Disk("virtual", buf.st_rdev, "virtual", |
| android::vold::Disk::Flags::kAdoptable | android::vold::Disk::Flags::kSd); |
| disk->create(); |
| mVirtualDisk = std::shared_ptr<android::vold::Disk>(disk); |
| mDisks.push_back(mVirtualDisk); |
| } |
| } else { |
| if (mVirtualDisk != nullptr) { |
| dev_t device = mVirtualDisk->getDevice(); |
| |
| auto i = mDisks.begin(); |
| while (i != mDisks.end()) { |
| if ((*i)->getDevice() == device) { |
| (*i)->destroy(); |
| i = mDisks.erase(i); |
| } else { |
| ++i; |
| } |
| } |
| |
| Loop::destroyByDevice(mVirtualDiskPath.c_str()); |
| mVirtualDisk = nullptr; |
| } |
| |
| if (access(kPathVirtualDisk, F_OK) == 0) { |
| unlink(kPathVirtualDisk); |
| } |
| } |
| return 0; |
| } |
| |
| int VolumeManager::setDebug(bool enable) { |
| mDebug = enable; |
| return 0; |
| } |
| |
| int VolumeManager::start() { |
| // Always start from a clean slate by unmounting everything in |
| // directories that we own, in case we crashed. |
| unmountAll(); |
| |
| Devmapper::destroyAll(); |
| Loop::destroyAll(); |
| |
| // Assume that we always have an emulated volume on internal |
| // storage; the framework will decide if it should be mounted. |
| CHECK(mInternalEmulated == nullptr); |
| mInternalEmulated = std::shared_ptr<android::vold::VolumeBase>( |
| new android::vold::EmulatedVolume("/data/media")); |
| mInternalEmulated->create(); |
| |
| // Consider creating a virtual disk |
| updateVirtualDisk(); |
| |
| return 0; |
| } |
| |
| int VolumeManager::stop() { |
| CHECK(mInternalEmulated != nullptr); |
| mInternalEmulated->destroy(); |
| mInternalEmulated = nullptr; |
| return 0; |
| } |
| |
| void VolumeManager::handleBlockEvent(NetlinkEvent *evt) { |
| std::lock_guard<std::mutex> lock(mLock); |
| |
| if (mDebug) { |
| LOG(VERBOSE) << "----------------"; |
| LOG(VERBOSE) << "handleBlockEvent with action " << (int) evt->getAction(); |
| evt->dump(); |
| } |
| |
| std::string eventPath(evt->findParam("DEVPATH")?evt->findParam("DEVPATH"):""); |
| std::string devType(evt->findParam("DEVTYPE")?evt->findParam("DEVTYPE"):""); |
| |
| if (devType != "disk") return; |
| |
| int major = atoi(evt->findParam("MAJOR")); |
| int minor = atoi(evt->findParam("MINOR")); |
| dev_t device = makedev(major, minor); |
| |
| switch (evt->getAction()) { |
| case NetlinkEvent::Action::kAdd: { |
| for (const auto& source : mDiskSources) { |
| if (source->matches(eventPath)) { |
| // For now, assume that MMC and virtio-blk (the latter is |
| // emulator-specific; see Disk.cpp for details) devices are SD, |
| // and that everything else is USB |
| int flags = source->getFlags(); |
| if (major == kMajorBlockMmc |
| || (android::vold::IsRunningInEmulator() |
| && major >= (int) kMajorBlockExperimentalMin |
| && major <= (int) kMajorBlockExperimentalMax)) { |
| flags |= android::vold::Disk::Flags::kSd; |
| } else { |
| flags |= android::vold::Disk::Flags::kUsb; |
| } |
| |
| auto disk = new android::vold::Disk(eventPath, device, |
| source->getNickname(), flags); |
| disk->create(); |
| mDisks.push_back(std::shared_ptr<android::vold::Disk>(disk)); |
| break; |
| } |
| } |
| break; |
| } |
| case NetlinkEvent::Action::kChange: { |
| LOG(DEBUG) << "Disk at " << major << ":" << minor << " changed"; |
| for (const auto& disk : mDisks) { |
| if (disk->getDevice() == device) { |
| disk->readMetadata(); |
| disk->readPartitions(); |
| } |
| } |
| break; |
| } |
| case NetlinkEvent::Action::kRemove: { |
| auto i = mDisks.begin(); |
| while (i != mDisks.end()) { |
| if ((*i)->getDevice() == device) { |
| (*i)->destroy(); |
| i = mDisks.erase(i); |
| } else { |
| ++i; |
| } |
| } |
| break; |
| } |
| default: { |
| LOG(WARNING) << "Unexpected block event action " << (int) evt->getAction(); |
| break; |
| } |
| } |
| } |
| |
| void VolumeManager::addDiskSource(const std::shared_ptr<DiskSource>& diskSource) { |
| std::lock_guard<std::mutex> lock(mLock); |
| mDiskSources.push_back(diskSource); |
| } |
| |
| std::shared_ptr<android::vold::Disk> VolumeManager::findDisk(const std::string& id) { |
| for (auto disk : mDisks) { |
| if (disk->getId() == id) { |
| return disk; |
| } |
| } |
| return nullptr; |
| } |
| |
| std::shared_ptr<android::vold::VolumeBase> VolumeManager::findVolume(const std::string& id) { |
| // Vold could receive "mount" after "shutdown" command in the extreme case. |
| // If this happens, mInternalEmulated will equal nullptr and |
| // we need to deal with it in order to avoid null pointer crash. |
| if (mInternalEmulated != nullptr && mInternalEmulated->getId() == id) { |
| return mInternalEmulated; |
| } |
| for (const auto& disk : mDisks) { |
| auto vol = disk->findVolume(id); |
| if (vol != nullptr) { |
| return vol; |
| } |
| } |
| for (const auto& vol : mObbVolumes) { |
| if (vol->getId() == id) { |
| return vol; |
| } |
| } |
| return nullptr; |
| } |
| |
| void VolumeManager::listVolumes(android::vold::VolumeBase::Type type, |
| std::list<std::string>& list) { |
| list.clear(); |
| for (const auto& disk : mDisks) { |
| disk->listVolumes(type, list); |
| } |
| } |
| |
| nsecs_t VolumeManager::benchmarkPrivate(const std::string& id) { |
| std::string path; |
| if (id == "private" || id == "null") { |
| path = "/data"; |
| } else { |
| auto vol = findVolume(id); |
| if (vol != nullptr && vol->getState() == android::vold::VolumeBase::State::kMounted) { |
| path = vol->getPath(); |
| } |
| } |
| |
| if (path.empty()) { |
| LOG(WARNING) << "Failed to find volume for " << id; |
| return -1; |
| } |
| |
| return android::vold::BenchmarkPrivate(path); |
| } |
| |
| int VolumeManager::forgetPartition(const std::string& partGuid) { |
| std::string normalizedGuid; |
| if (android::vold::NormalizeHex(partGuid, normalizedGuid)) { |
| LOG(WARNING) << "Invalid GUID " << partGuid; |
| return -1; |
| } |
| |
| std::string keyPath = android::vold::BuildKeyPath(normalizedGuid); |
| if (unlink(keyPath.c_str()) != 0) { |
| LOG(ERROR) << "Failed to unlink " << keyPath; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int VolumeManager::linkPrimary(userid_t userId) { |
| std::string source(mPrimary->getPath()); |
| if (mPrimary->getType() == android::vold::VolumeBase::Type::kEmulated) { |
| source = StringPrintf("%s/%d", source.c_str(), userId); |
| fs_prepare_dir(source.c_str(), 0755, AID_ROOT, AID_ROOT); |
| } |
| |
| std::string target(StringPrintf("/mnt/user/%d/primary", userId)); |
| if (TEMP_FAILURE_RETRY(unlink(target.c_str()))) { |
| if (errno != ENOENT) { |
| SLOGW("Failed to unlink %s: %s", target.c_str(), strerror(errno)); |
| } |
| } |
| LOG(DEBUG) << "Linking " << source << " to " << target; |
| if (TEMP_FAILURE_RETRY(symlink(source.c_str(), target.c_str()))) { |
| SLOGW("Failed to link %s to %s: %s", source.c_str(), target.c_str(), |
| strerror(errno)); |
| return -errno; |
| } |
| return 0; |
| } |
| |
| int VolumeManager::onUserAdded(userid_t userId, int userSerialNumber) { |
| mAddedUsers[userId] = userSerialNumber; |
| return 0; |
| } |
| |
| int VolumeManager::onUserRemoved(userid_t userId) { |
| mAddedUsers.erase(userId); |
| return 0; |
| } |
| |
| int VolumeManager::onUserStarted(userid_t userId) { |
| // Note that sometimes the system will spin up processes from Zygote |
| // before actually starting the user, so we're okay if Zygote |
| // already created this directory. |
| std::string path(StringPrintf("%s/%d", kPathUserMount, userId)); |
| fs_prepare_dir(path.c_str(), 0755, AID_ROOT, AID_ROOT); |
| |
| mStartedUsers.insert(userId); |
| if (mPrimary) { |
| linkPrimary(userId); |
| } |
| return 0; |
| } |
| |
| int VolumeManager::onUserStopped(userid_t userId) { |
| mStartedUsers.erase(userId); |
| return 0; |
| } |
| |
| int VolumeManager::setPrimary(const std::shared_ptr<android::vold::VolumeBase>& vol) { |
| mPrimary = vol; |
| for (userid_t userId : mStartedUsers) { |
| linkPrimary(userId); |
| } |
| return 0; |
| } |
| |
| static int unmount_tree(const char* path) { |
| size_t path_len = strlen(path); |
| |
| FILE* fp = setmntent("/proc/mounts", "r"); |
| if (fp == NULL) { |
| ALOGE("Error opening /proc/mounts: %s", strerror(errno)); |
| return -errno; |
| } |
| |
| // Some volumes can be stacked on each other, so force unmount in |
| // reverse order to give us the best chance of success. |
| std::list<std::string> toUnmount; |
| mntent* mentry; |
| while ((mentry = getmntent(fp)) != NULL) { |
| if (strncmp(mentry->mnt_dir, path, path_len) == 0) { |
| toUnmount.push_front(std::string(mentry->mnt_dir)); |
| } |
| } |
| endmntent(fp); |
| |
| for (const auto& path : toUnmount) { |
| if (umount2(path.c_str(), MNT_DETACH)) { |
| ALOGW("Failed to unmount %s: %s", path.c_str(), strerror(errno)); |
| } |
| } |
| return 0; |
| } |
| |
| int VolumeManager::remountUid(uid_t uid, const std::string& mode) { |
| LOG(DEBUG) << "Remounting " << uid << " as mode " << mode; |
| |
| DIR* dir; |
| struct dirent* de; |
| char rootName[PATH_MAX]; |
| char pidName[PATH_MAX]; |
| int pidFd; |
| int nsFd; |
| struct stat sb; |
| pid_t child; |
| |
| if (!(dir = opendir("/proc"))) { |
| PLOG(ERROR) << "Failed to opendir"; |
| return -1; |
| } |
| |
| // Figure out root namespace to compare against below |
| if (android::vold::SaneReadLinkAt(dirfd(dir), "1/ns/mnt", rootName, PATH_MAX) == -1) { |
| PLOG(ERROR) << "Failed to readlink"; |
| closedir(dir); |
| return -1; |
| } |
| |
| // Poke through all running PIDs look for apps running as UID |
| while ((de = readdir(dir))) { |
| pidFd = -1; |
| nsFd = -1; |
| |
| pidFd = openat(dirfd(dir), de->d_name, O_RDONLY | O_DIRECTORY | O_CLOEXEC); |
| if (pidFd < 0) { |
| goto next; |
| } |
| if (fstat(pidFd, &sb) != 0) { |
| PLOG(WARNING) << "Failed to stat " << de->d_name; |
| goto next; |
| } |
| if (sb.st_uid != uid) { |
| goto next; |
| } |
| |
| // Matches so far, but refuse to touch if in root namespace |
| LOG(DEBUG) << "Found matching PID " << de->d_name; |
| if (android::vold::SaneReadLinkAt(pidFd, "ns/mnt", pidName, PATH_MAX) == -1) { |
| PLOG(WARNING) << "Failed to read namespace for " << de->d_name; |
| goto next; |
| } |
| if (!strcmp(rootName, pidName)) { |
| LOG(WARNING) << "Skipping due to root namespace"; |
| goto next; |
| } |
| |
| // We purposefully leave the namespace open across the fork |
| nsFd = openat(pidFd, "ns/mnt", O_RDONLY); // not O_CLOEXEC |
| if (nsFd < 0) { |
| PLOG(WARNING) << "Failed to open namespace for " << de->d_name; |
| goto next; |
| } |
| |
| if (!(child = fork())) { |
| if (setns(nsFd, CLONE_NEWNS) != 0) { |
| PLOG(ERROR) << "Failed to setns for " << de->d_name; |
| _exit(1); |
| } |
| |
| unmount_tree("/storage"); |
| |
| std::string storageSource; |
| if (mode == "default") { |
| storageSource = "/mnt/runtime/default"; |
| } else if (mode == "read") { |
| storageSource = "/mnt/runtime/read"; |
| } else if (mode == "write") { |
| storageSource = "/mnt/runtime/write"; |
| } else { |
| // Sane default of no storage visible |
| _exit(0); |
| } |
| if (TEMP_FAILURE_RETRY(mount(storageSource.c_str(), "/storage", |
| NULL, MS_BIND | MS_REC, NULL)) == -1) { |
| PLOG(ERROR) << "Failed to mount " << storageSource << " for " |
| << de->d_name; |
| _exit(1); |
| } |
| if (TEMP_FAILURE_RETRY(mount(NULL, "/storage", NULL, |
| MS_REC | MS_SLAVE, NULL)) == -1) { |
| PLOG(ERROR) << "Failed to set MS_SLAVE to /storage for " |
| << de->d_name; |
| _exit(1); |
| } |
| |
| // Mount user-specific symlink helper into place |
| userid_t user_id = multiuser_get_user_id(uid); |
| std::string userSource(StringPrintf("/mnt/user/%d", user_id)); |
| if (TEMP_FAILURE_RETRY(mount(userSource.c_str(), "/storage/self", |
| NULL, MS_BIND, NULL)) == -1) { |
| PLOG(ERROR) << "Failed to mount " << userSource << " for " |
| << de->d_name; |
| _exit(1); |
| } |
| |
| _exit(0); |
| } |
| |
| if (child == -1) { |
| PLOG(ERROR) << "Failed to fork"; |
| goto next; |
| } else { |
| TEMP_FAILURE_RETRY(waitpid(child, nullptr, 0)); |
| } |
| |
| next: |
| close(nsFd); |
| close(pidFd); |
| } |
| closedir(dir); |
| return 0; |
| } |
| |
| int VolumeManager::reset() { |
| // Tear down all existing disks/volumes and start from a blank slate so |
| // newly connected framework hears all events. |
| if (mInternalEmulated != nullptr) { |
| mInternalEmulated->destroy(); |
| mInternalEmulated->create(); |
| } |
| for (const auto& disk : mDisks) { |
| disk->destroy(); |
| disk->create(); |
| } |
| updateVirtualDisk(); |
| mAddedUsers.clear(); |
| mStartedUsers.clear(); |
| return 0; |
| } |
| |
| // Can be called twice (sequentially) during shutdown. should be safe for that. |
| int VolumeManager::shutdown() { |
| if (mInternalEmulated == nullptr) { |
| return 0; // already shutdown |
| } |
| shutting_down = true; |
| mInternalEmulated->destroy(); |
| mInternalEmulated = nullptr; |
| for (const auto& disk : mDisks) { |
| disk->destroy(); |
| } |
| mDisks.clear(); |
| shutting_down = false; |
| return 0; |
| } |
| |
| int VolumeManager::unmountAll() { |
| std::lock_guard<std::mutex> lock(mLock); |
| |
| // First, try gracefully unmounting all known devices |
| if (mInternalEmulated != nullptr) { |
| mInternalEmulated->unmount(); |
| } |
| for (const auto& disk : mDisks) { |
| disk->unmountAll(); |
| } |
| |
| // Worst case we might have some stale mounts lurking around, so |
| // force unmount those just to be safe. |
| FILE* fp = setmntent("/proc/mounts", "r"); |
| if (fp == NULL) { |
| SLOGE("Error opening /proc/mounts: %s", strerror(errno)); |
| return -errno; |
| } |
| |
| // Some volumes can be stacked on each other, so force unmount in |
| // reverse order to give us the best chance of success. |
| std::list<std::string> toUnmount; |
| mntent* mentry; |
| while ((mentry = getmntent(fp)) != NULL) { |
| if (strncmp(mentry->mnt_dir, "/mnt/", 5) == 0 |
| || strncmp(mentry->mnt_dir, "/storage/", 9) == 0) { |
| toUnmount.push_front(std::string(mentry->mnt_dir)); |
| } |
| } |
| endmntent(fp); |
| |
| for (const auto& path : toUnmount) { |
| LOG(DEBUG) << "Tearing down stale mount " << path; |
| android::vold::ForceUnmount(path); |
| } |
| |
| return 0; |
| } |
| |
| int VolumeManager::getObbMountPath(const char *sourceFile, char *mountPath, int mountPathLen) { |
| char idHash[33]; |
| if (!asecHash(sourceFile, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", sourceFile, strerror(errno)); |
| return -1; |
| } |
| |
| memset(mountPath, 0, mountPathLen); |
| int written = snprintf(mountPath, mountPathLen, "%s/%s", VolumeManager::LOOPDIR, idHash); |
| if ((written < 0) || (written >= mountPathLen)) { |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (access(mountPath, F_OK)) { |
| errno = ENOENT; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int VolumeManager::getAsecMountPath(const char *id, char *buffer, int maxlen) { |
| char asecFileName[255]; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("getAsecMountPath: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| memset(buffer, 0, maxlen); |
| if (access(asecFileName, F_OK)) { |
| errno = ENOENT; |
| return -1; |
| } |
| |
| int written = snprintf(buffer, maxlen, "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (written >= maxlen)) { |
| SLOGE("getAsecMountPath failed for %s: couldn't construct path in buffer", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int VolumeManager::getAsecFilesystemPath(const char *id, char *buffer, int maxlen) { |
| char asecFileName[255]; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("getAsecFilesystemPath: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| memset(buffer, 0, maxlen); |
| if (access(asecFileName, F_OK)) { |
| errno = ENOENT; |
| return -1; |
| } |
| |
| int written = snprintf(buffer, maxlen, "%s", asecFileName); |
| if ((written < 0) || (written >= maxlen)) { |
| errno = EINVAL; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int VolumeManager::createAsec(const char *id, unsigned long numSectors, const char *fstype, |
| const char *key, const int ownerUid, bool isExternal) { |
| struct asec_superblock sb; |
| memset(&sb, 0, sizeof(sb)); |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("createAsec: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| const bool wantFilesystem = strcmp(fstype, "none"); |
| bool usingExt4 = false; |
| if (wantFilesystem) { |
| usingExt4 = !strcmp(fstype, "ext4"); |
| if (usingExt4) { |
| sb.c_opts |= ASEC_SB_C_OPTS_EXT4; |
| } else if (strcmp(fstype, "fat")) { |
| SLOGE("Invalid filesystem type %s", fstype); |
| errno = EINVAL; |
| return -1; |
| } |
| } |
| |
| sb.magic = ASEC_SB_MAGIC; |
| sb.ver = ASEC_SB_VER; |
| |
| if (numSectors < ((1024*1024)/512)) { |
| SLOGE("Invalid container size specified (%lu sectors)", numSectors); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| char asecFileName[255]; |
| |
| if (!findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("ASEC file '%s' currently exists - destroy it first! (%s)", |
| asecFileName, strerror(errno)); |
| errno = EADDRINUSE; |
| return -1; |
| } |
| |
| const char *asecDir = isExternal ? VolumeManager::SEC_ASECDIR_EXT : VolumeManager::SEC_ASECDIR_INT; |
| |
| int written = snprintf(asecFileName, sizeof(asecFileName), "%s/%s.asec", asecDir, id); |
| if ((written < 0) || (size_t(written) >= sizeof(asecFileName))) { |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (!access(asecFileName, F_OK)) { |
| SLOGE("ASEC file '%s' currently exists - destroy it first! (%s)", |
| asecFileName, strerror(errno)); |
| errno = EADDRINUSE; |
| return -1; |
| } |
| |
| unsigned long numImgSectors; |
| if (usingExt4) |
| numImgSectors = adjustSectorNumExt4(numSectors); |
| else |
| numImgSectors = adjustSectorNumFAT(numSectors); |
| |
| // Add +1 for our superblock which is at the end |
| if (Loop::createImageFile(asecFileName, numImgSectors + 1)) { |
| SLOGE("ASEC image file creation failed (%s)", strerror(errno)); |
| return -1; |
| } |
| |
| char idHash[33]; |
| if (!asecHash(id, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", id, strerror(errno)); |
| unlink(asecFileName); |
| return -1; |
| } |
| |
| char loopDevice[255]; |
| if (Loop::create(idHash, asecFileName, loopDevice, sizeof(loopDevice))) { |
| SLOGE("ASEC loop device creation failed (%s)", strerror(errno)); |
| unlink(asecFileName); |
| return -1; |
| } |
| |
| char dmDevice[255]; |
| bool cleanupDm = false; |
| |
| if (strcmp(key, "none")) { |
| // XXX: This is all we support for now |
| sb.c_cipher = ASEC_SB_C_CIPHER_TWOFISH; |
| if (Devmapper::create(idHash, loopDevice, key, numImgSectors, dmDevice, |
| sizeof(dmDevice))) { |
| SLOGE("ASEC device mapping failed (%s)", strerror(errno)); |
| Loop::destroyByDevice(loopDevice); |
| unlink(asecFileName); |
| return -1; |
| } |
| cleanupDm = true; |
| } else { |
| sb.c_cipher = ASEC_SB_C_CIPHER_NONE; |
| strlcpy(dmDevice, loopDevice, sizeof(dmDevice)); |
| } |
| |
| /* |
| * Drop down the superblock at the end of the file |
| */ |
| if (writeSuperBlock(loopDevice, &sb, numImgSectors)) { |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| unlink(asecFileName); |
| return -1; |
| } |
| |
| if (wantFilesystem) { |
| int formatStatus; |
| char mountPoint[255]; |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("ASEC fs format failed: couldn't construct mountPoint"); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| unlink(asecFileName); |
| return -1; |
| } |
| |
| if (usingExt4) { |
| formatStatus = android::vold::ext4::Format(dmDevice, numImgSectors, mountPoint); |
| } else { |
| formatStatus = android::vold::vfat::Format(dmDevice, numImgSectors); |
| } |
| |
| if (formatStatus < 0) { |
| SLOGE("ASEC fs format failed (%s)", strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| unlink(asecFileName); |
| return -1; |
| } |
| |
| if (mkdir(mountPoint, 0000)) { |
| if (errno != EEXIST) { |
| SLOGE("Mountpoint creation failed (%s)", strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| unlink(asecFileName); |
| return -1; |
| } |
| } |
| |
| int mountStatus; |
| if (usingExt4) { |
| mountStatus = android::vold::ext4::Mount(dmDevice, mountPoint, |
| false, false, false); |
| } else { |
| mountStatus = android::vold::vfat::Mount(dmDevice, mountPoint, |
| false, false, false, ownerUid, 0, 0000, false); |
| } |
| |
| if (mountStatus) { |
| SLOGE("ASEC FAT mount failed (%s)", strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| unlink(asecFileName); |
| return -1; |
| } |
| |
| if (usingExt4) { |
| int dirfd = open(mountPoint, O_DIRECTORY | O_CLOEXEC); |
| if (dirfd >= 0) { |
| if (fchown(dirfd, ownerUid, AID_SYSTEM) |
| || fchmod(dirfd, S_IRUSR | S_IWUSR | S_IXUSR | S_ISGID | S_IRGRP | S_IXGRP)) { |
| SLOGI("Cannot chown/chmod new ASEC mount point %s", mountPoint); |
| } |
| close(dirfd); |
| } |
| } |
| } else { |
| SLOGI("Created raw secure container %s (no filesystem)", id); |
| } |
| |
| mActiveContainers->push_back(new ContainerData(strdup(id), ASEC)); |
| return 0; |
| } |
| |
| int VolumeManager::resizeAsec(const char *id, unsigned long numSectors, const char *key) { |
| char asecFileName[255]; |
| char mountPoint[255]; |
| bool cleanupDm = false; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("resizeAsec: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("ASEC resize failed for %s: couldn't construct mountpoint", id); |
| return -1; |
| } |
| |
| if (isMountpointMounted(mountPoint)) { |
| SLOGE("ASEC %s mounted. Unmount before resizing", id); |
| errno = EBUSY; |
| return -1; |
| } |
| |
| struct asec_superblock sb; |
| int fd; |
| unsigned long oldNumSec = 0; |
| |
| if ((fd = open(asecFileName, O_RDONLY | O_CLOEXEC)) < 0) { |
| SLOGE("Failed to open ASEC file (%s)", strerror(errno)); |
| return -1; |
| } |
| |
| struct stat info; |
| if (fstat(fd, &info) < 0) { |
| SLOGE("Failed to get file size (%s)", strerror(errno)); |
| close(fd); |
| return -1; |
| } |
| |
| oldNumSec = info.st_size / 512; |
| |
| /* |
| * Try to read superblock. |
| */ |
| memset(&sb, 0, sizeof(struct asec_superblock)); |
| if (lseek(fd, ((oldNumSec - 1) * 512), SEEK_SET) < 0) { |
| SLOGE("lseek failed (%s)", strerror(errno)); |
| close(fd); |
| return -1; |
| } |
| if (read(fd, &sb, sizeof(struct asec_superblock)) != sizeof(struct asec_superblock)) { |
| SLOGE("superblock read failed (%s)", strerror(errno)); |
| close(fd); |
| return -1; |
| } |
| close(fd); |
| |
| if (mDebug) { |
| SLOGD("Container sb magic/ver (%.8x/%.2x)", sb.magic, sb.ver); |
| } |
| if (sb.magic != ASEC_SB_MAGIC || sb.ver != ASEC_SB_VER) { |
| SLOGE("Bad container magic/version (%.8x/%.2x)", sb.magic, sb.ver); |
| errno = EMEDIUMTYPE; |
| return -1; |
| } |
| |
| unsigned long numImgSectors; |
| if (!(sb.c_opts & ASEC_SB_C_OPTS_EXT4)) { |
| SLOGE("Only ext4 partitions are supported for resize"); |
| errno = EINVAL; |
| return -1; |
| } else { |
| numImgSectors = adjustSectorNumExt4(numSectors); |
| } |
| |
| /* |
| * add one block for the superblock |
| */ |
| SLOGD("Resizing from %lu sectors to %lu sectors", oldNumSec, numImgSectors + 1); |
| if (oldNumSec == numImgSectors + 1) { |
| SLOGW("Size unchanged; ignoring resize request"); |
| return 0; |
| } else if (oldNumSec > numImgSectors + 1) { |
| SLOGE("Only growing is currently supported."); |
| close(fd); |
| return -1; |
| } |
| |
| if (Loop::resizeImageFile(asecFileName, numImgSectors + 1)) { |
| SLOGE("Resize of ASEC image file failed. Could not resize %s", id); |
| return -1; |
| } |
| |
| /* |
| * Drop down a copy of the superblock at the end of the file |
| */ |
| if (writeSuperBlock(asecFileName, &sb, numImgSectors)) |
| goto fail; |
| |
| char idHash[33]; |
| if (!asecHash(id, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", id, strerror(errno)); |
| goto fail; |
| } |
| |
| char loopDevice[255]; |
| if (setupLoopDevice(loopDevice, sizeof(loopDevice), asecFileName, idHash, mDebug)) |
| goto fail; |
| |
| char dmDevice[255]; |
| |
| if (setupDevMapperDevice(dmDevice, sizeof(dmDevice), loopDevice, asecFileName, key, idHash, numImgSectors, &cleanupDm, mDebug)) { |
| Loop::destroyByDevice(loopDevice); |
| goto fail; |
| } |
| |
| /* |
| * Wait for the device mapper node to be created. |
| */ |
| waitForDevMapper(dmDevice); |
| |
| if (android::vold::ext4::Resize(dmDevice, numImgSectors)) { |
| SLOGE("Unable to resize %s (%s)", id, strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| goto fail; |
| } |
| |
| return 0; |
| fail: |
| Loop::resizeImageFile(asecFileName, oldNumSec); |
| return -1; |
| } |
| |
| int VolumeManager::finalizeAsec(const char *id) { |
| char asecFileName[255]; |
| char loopDevice[255]; |
| char mountPoint[255]; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("finalizeAsec: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| char idHash[33]; |
| if (!asecHash(id, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| if (Loop::lookupActive(idHash, loopDevice, sizeof(loopDevice))) { |
| SLOGE("Unable to finalize %s (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| unsigned long nr_sec = 0; |
| struct asec_superblock sb; |
| |
| if (Loop::lookupInfo(loopDevice, &sb, &nr_sec)) { |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("ASEC finalize failed: couldn't construct mountPoint"); |
| return -1; |
| } |
| |
| int result = 0; |
| if (sb.c_opts & ASEC_SB_C_OPTS_EXT4) { |
| result = android::vold::ext4::Mount(loopDevice, mountPoint, |
| true, true, true); |
| } else { |
| result = android::vold::vfat::Mount(loopDevice, mountPoint, |
| true, true, true, 0, 0, 0227, false); |
| } |
| |
| if (result) { |
| SLOGE("ASEC finalize mount failed (%s)", strerror(errno)); |
| return -1; |
| } |
| |
| if (mDebug) { |
| SLOGD("ASEC %s finalized", id); |
| } |
| return 0; |
| } |
| |
| int VolumeManager::fixupAsecPermissions(const char *id, gid_t gid, const char* filename) { |
| char asecFileName[255]; |
| char loopDevice[255]; |
| char mountPoint[255]; |
| |
| if (gid < AID_APP) { |
| SLOGE("Group ID is not in application range"); |
| return -1; |
| } |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("fixupAsecPermissions: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| char idHash[33]; |
| if (!asecHash(id, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| if (Loop::lookupActive(idHash, loopDevice, sizeof(loopDevice))) { |
| SLOGE("Unable fix permissions during lookup on %s (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| unsigned long nr_sec = 0; |
| struct asec_superblock sb; |
| |
| if (Loop::lookupInfo(loopDevice, &sb, &nr_sec)) { |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("Unable remount to fix permissions for %s: couldn't construct mountpoint", id); |
| return -1; |
| } |
| |
| int result = 0; |
| if ((sb.c_opts & ASEC_SB_C_OPTS_EXT4) == 0) { |
| return 0; |
| } |
| |
| int ret = android::vold::ext4::Mount(loopDevice, mountPoint, |
| false /* read-only */, |
| true /* remount */, |
| false /* executable */); |
| if (ret) { |
| SLOGE("Unable remount to fix permissions for %s (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| char *paths[] = { mountPoint, NULL }; |
| |
| FTS *fts = fts_open(paths, FTS_PHYSICAL | FTS_NOCHDIR | FTS_XDEV, NULL); |
| if (fts) { |
| // Traverse the entire hierarchy and chown to system UID. |
| for (FTSENT *ftsent = fts_read(fts); ftsent != NULL; ftsent = fts_read(fts)) { |
| // We don't care about the lost+found directory. |
| if (!strcmp(ftsent->fts_name, "lost+found")) { |
| continue; |
| } |
| |
| /* |
| * There can only be one file marked as private right now. |
| * This should be more robust, but it satisfies the requirements |
| * we have for right now. |
| */ |
| const bool privateFile = !strcmp(ftsent->fts_name, filename); |
| |
| int fd = open(ftsent->fts_accpath, O_NOFOLLOW | O_CLOEXEC); |
| if (fd < 0) { |
| SLOGE("Couldn't open file %s: %s", ftsent->fts_accpath, strerror(errno)); |
| result = -1; |
| continue; |
| } |
| |
| result |= fchown(fd, AID_SYSTEM, privateFile? gid : AID_SYSTEM); |
| |
| if (ftsent->fts_info & FTS_D) { |
| result |= fchmod(fd, 0755); |
| } else if (ftsent->fts_info & FTS_F) { |
| result |= fchmod(fd, privateFile ? 0640 : 0644); |
| } |
| |
| if (selinux_android_restorecon(ftsent->fts_path, 0) < 0) { |
| SLOGE("restorecon failed for %s: %s\n", ftsent->fts_path, strerror(errno)); |
| result |= -1; |
| } |
| |
| close(fd); |
| } |
| fts_close(fts); |
| |
| // Finally make the directory readable by everyone. |
| int dirfd = open(mountPoint, O_DIRECTORY | O_CLOEXEC); |
| if (dirfd < 0 || fchmod(dirfd, 0755)) { |
| SLOGE("Couldn't change owner of existing directory %s: %s", mountPoint, strerror(errno)); |
| result |= -1; |
| } |
| close(dirfd); |
| } else { |
| result |= -1; |
| } |
| |
| result |= android::vold::ext4::Mount(loopDevice, mountPoint, |
| true /* read-only */, |
| true /* remount */, |
| true /* execute */); |
| |
| if (result) { |
| SLOGE("ASEC fix permissions failed (%s)", strerror(errno)); |
| return -1; |
| } |
| |
| if (mDebug) { |
| SLOGD("ASEC %s permissions fixed", id); |
| } |
| return 0; |
| } |
| |
| int VolumeManager::renameAsec(const char *id1, const char *id2) { |
| char asecFilename1[255]; |
| char *asecFilename2; |
| char mountPoint[255]; |
| |
| const char *dir; |
| |
| if (!isLegalAsecId(id1)) { |
| SLOGE("renameAsec: Invalid asec id1 \"%s\"", id1); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (!isLegalAsecId(id2)) { |
| SLOGE("renameAsec: Invalid asec id2 \"%s\"", id2); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id1, asecFilename1, sizeof(asecFilename1), &dir)) { |
| SLOGE("Couldn't find ASEC %s", id1); |
| return -1; |
| } |
| |
| asprintf(&asecFilename2, "%s/%s.asec", dir, id2); |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id1); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("Rename failed: couldn't construct mountpoint"); |
| goto out_err; |
| } |
| |
| if (isMountpointMounted(mountPoint)) { |
| SLOGW("Rename attempt when src mounted"); |
| errno = EBUSY; |
| goto out_err; |
| } |
| |
| written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id2); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("Rename failed: couldn't construct mountpoint2"); |
| goto out_err; |
| } |
| |
| if (isMountpointMounted(mountPoint)) { |
| SLOGW("Rename attempt when dst mounted"); |
| errno = EBUSY; |
| goto out_err; |
| } |
| |
| if (!access(asecFilename2, F_OK)) { |
| SLOGE("Rename attempt when dst exists"); |
| errno = EADDRINUSE; |
| goto out_err; |
| } |
| |
| if (rename(asecFilename1, asecFilename2)) { |
| SLOGE("Rename of '%s' to '%s' failed (%s)", asecFilename1, asecFilename2, strerror(errno)); |
| goto out_err; |
| } |
| |
| free(asecFilename2); |
| return 0; |
| |
| out_err: |
| free(asecFilename2); |
| return -1; |
| } |
| |
| #define UNMOUNT_RETRIES 5 |
| #define UNMOUNT_SLEEP_BETWEEN_RETRY_MS (1000 * 1000) |
| int VolumeManager::unmountAsec(const char *id, bool force) { |
| char asecFileName[255]; |
| char mountPoint[255]; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("unmountAsec: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("ASEC unmount failed for %s: couldn't construct mountpoint", id); |
| return -1; |
| } |
| |
| char idHash[33]; |
| if (!asecHash(id, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| return unmountLoopImage(id, idHash, asecFileName, mountPoint, force); |
| } |
| |
| int VolumeManager::unmountObb(const char *fileName, bool force) { |
| char mountPoint[255]; |
| |
| char idHash[33]; |
| if (!asecHash(fileName, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", fileName, strerror(errno)); |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::LOOPDIR, idHash); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("OBB unmount failed for %s: couldn't construct mountpoint", fileName); |
| return -1; |
| } |
| |
| return unmountLoopImage(fileName, idHash, fileName, mountPoint, force); |
| } |
| |
| int VolumeManager::unmountLoopImage(const char *id, const char *idHash, |
| const char *fileName, const char *mountPoint, bool force) { |
| if (!isMountpointMounted(mountPoint)) { |
| SLOGE("Unmount request for %s when not mounted", id); |
| errno = ENOENT; |
| return -1; |
| } |
| |
| int i, rc; |
| for (i = 1; i <= UNMOUNT_RETRIES; i++) { |
| rc = umount(mountPoint); |
| if (!rc) { |
| break; |
| } |
| if (rc && (errno == EINVAL || errno == ENOENT)) { |
| SLOGI("Container %s unmounted OK", id); |
| rc = 0; |
| break; |
| } |
| SLOGW("%s unmount attempt %d failed (%s)", |
| id, i, strerror(errno)); |
| |
| int signal = 0; // default is to just complain |
| |
| if (force) { |
| if (i > (UNMOUNT_RETRIES - 2)) |
| signal = SIGKILL; |
| else if (i > (UNMOUNT_RETRIES - 3)) |
| signal = SIGTERM; |
| } |
| |
| Process::killProcessesWithOpenFiles(mountPoint, signal); |
| usleep(UNMOUNT_SLEEP_BETWEEN_RETRY_MS); |
| } |
| |
| if (rc) { |
| errno = EBUSY; |
| SLOGE("Failed to unmount container %s (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| int retries = 10; |
| |
| while(retries--) { |
| if (!rmdir(mountPoint)) { |
| break; |
| } |
| |
| SLOGW("Failed to rmdir %s (%s)", mountPoint, strerror(errno)); |
| usleep(UNMOUNT_SLEEP_BETWEEN_RETRY_MS); |
| } |
| |
| if (!retries) { |
| SLOGE("Timed out trying to rmdir %s (%s)", mountPoint, strerror(errno)); |
| } |
| |
| for (i=1; i <= UNMOUNT_RETRIES; i++) { |
| if (Devmapper::destroy(idHash) && errno != ENXIO) { |
| SLOGE("Failed to destroy devmapper instance (%s)", strerror(errno)); |
| usleep(UNMOUNT_SLEEP_BETWEEN_RETRY_MS); |
| continue; |
| } else { |
| break; |
| } |
| } |
| |
| char loopDevice[255]; |
| if (!Loop::lookupActive(idHash, loopDevice, sizeof(loopDevice))) { |
| Loop::destroyByDevice(loopDevice); |
| } else { |
| SLOGW("Failed to find loop device for {%s} (%s)", fileName, strerror(errno)); |
| } |
| |
| AsecIdCollection::iterator it; |
| for (it = mActiveContainers->begin(); it != mActiveContainers->end(); ++it) { |
| ContainerData* cd = *it; |
| if (!strcmp(cd->id, id)) { |
| free(*it); |
| mActiveContainers->erase(it); |
| break; |
| } |
| } |
| if (it == mActiveContainers->end()) { |
| SLOGW("mActiveContainers is inconsistent!"); |
| } |
| return 0; |
| } |
| |
| int VolumeManager::destroyAsec(const char *id, bool force) { |
| char asecFileName[255]; |
| char mountPoint[255]; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("destroyAsec: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("ASEC destroy failed for %s: couldn't construct mountpoint", id); |
| return -1; |
| } |
| |
| if (isMountpointMounted(mountPoint)) { |
| if (mDebug) { |
| SLOGD("Unmounting container before destroy"); |
| } |
| if (unmountAsec(id, force)) { |
| SLOGE("Failed to unmount asec %s for destroy (%s)", id, strerror(errno)); |
| return -1; |
| } |
| } |
| |
| if (unlink(asecFileName)) { |
| SLOGE("Failed to unlink asec '%s' (%s)", asecFileName, strerror(errno)); |
| return -1; |
| } |
| |
| if (mDebug) { |
| SLOGD("ASEC %s destroyed", id); |
| } |
| return 0; |
| } |
| |
| /* |
| * Legal ASEC ids consist of alphanumeric characters, '-', |
| * '_', or '.'. ".." is not allowed. The first or last character |
| * of the ASEC id cannot be '.' (dot). |
| */ |
| bool VolumeManager::isLegalAsecId(const char *id) const { |
| size_t i; |
| size_t len = strlen(id); |
| |
| if (len == 0) { |
| return false; |
| } |
| if ((id[0] == '.') || (id[len - 1] == '.')) { |
| return false; |
| } |
| |
| for (i = 0; i < len; i++) { |
| if (id[i] == '.') { |
| // i=0 is guaranteed never to have a dot. See above. |
| if (id[i-1] == '.') return false; |
| continue; |
| } |
| if (id[i] == '_' || id[i] == '-') continue; |
| if (id[i] >= 'a' && id[i] <= 'z') continue; |
| if (id[i] >= 'A' && id[i] <= 'Z') continue; |
| if (id[i] >= '0' && id[i] <= '9') continue; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool VolumeManager::isAsecInDirectory(const char *dir, const char *asecName) const { |
| int dirfd = open(dir, O_DIRECTORY | O_CLOEXEC); |
| if (dirfd < 0) { |
| SLOGE("Couldn't open internal ASEC dir (%s)", strerror(errno)); |
| return false; |
| } |
| |
| struct stat sb; |
| bool ret = (fstatat(dirfd, asecName, &sb, AT_SYMLINK_NOFOLLOW) == 0) |
| && S_ISREG(sb.st_mode); |
| |
| close(dirfd); |
| |
| return ret; |
| } |
| |
| int VolumeManager::findAsec(const char *id, char *asecPath, size_t asecPathLen, |
| const char **directory) const { |
| char *asecName; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("findAsec: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (asprintf(&asecName, "%s.asec", id) < 0) { |
| SLOGE("Couldn't allocate string to write ASEC name"); |
| return -1; |
| } |
| |
| const char *dir; |
| if (isAsecInDirectory(VolumeManager::SEC_ASECDIR_INT, asecName)) { |
| dir = VolumeManager::SEC_ASECDIR_INT; |
| } else if (isAsecInDirectory(VolumeManager::SEC_ASECDIR_EXT, asecName)) { |
| dir = VolumeManager::SEC_ASECDIR_EXT; |
| } else { |
| free(asecName); |
| return -1; |
| } |
| |
| if (directory != NULL) { |
| *directory = dir; |
| } |
| |
| if (asecPath != NULL) { |
| int written = snprintf(asecPath, asecPathLen, "%s/%s", dir, asecName); |
| if ((written < 0) || (size_t(written) >= asecPathLen)) { |
| SLOGE("findAsec failed for %s: couldn't construct ASEC path", id); |
| free(asecName); |
| return -1; |
| } |
| } |
| |
| free(asecName); |
| return 0; |
| } |
| |
| int VolumeManager::mountAsec(const char *id, const char *key, int ownerUid, bool readOnly) { |
| char asecFileName[255]; |
| char mountPoint[255]; |
| |
| if (!isLegalAsecId(id)) { |
| SLOGE("mountAsec: Invalid asec id \"%s\"", id); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (findAsec(id, asecFileName, sizeof(asecFileName))) { |
| SLOGE("Couldn't find ASEC %s", id); |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::ASECDIR, id); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("ASEC mount failed for %s: couldn't construct mountpoint", id); |
| return -1; |
| } |
| |
| if (isMountpointMounted(mountPoint)) { |
| SLOGE("ASEC %s already mounted", id); |
| errno = EBUSY; |
| return -1; |
| } |
| |
| char idHash[33]; |
| if (!asecHash(id, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", id, strerror(errno)); |
| return -1; |
| } |
| |
| char loopDevice[255]; |
| if (setupLoopDevice(loopDevice, sizeof(loopDevice), asecFileName, idHash, mDebug)) |
| return -1; |
| |
| char dmDevice[255]; |
| bool cleanupDm = false; |
| |
| unsigned long nr_sec = 0; |
| struct asec_superblock sb; |
| |
| if (Loop::lookupInfo(loopDevice, &sb, &nr_sec)) { |
| return -1; |
| } |
| |
| if (mDebug) { |
| SLOGD("Container sb magic/ver (%.8x/%.2x)", sb.magic, sb.ver); |
| } |
| if (sb.magic != ASEC_SB_MAGIC || sb.ver != ASEC_SB_VER) { |
| SLOGE("Bad container magic/version (%.8x/%.2x)", sb.magic, sb.ver); |
| Loop::destroyByDevice(loopDevice); |
| errno = EMEDIUMTYPE; |
| return -1; |
| } |
| nr_sec--; // We don't want the devmapping to extend onto our superblock |
| |
| if (setupDevMapperDevice(dmDevice, sizeof(dmDevice), loopDevice, asecFileName, key, idHash , nr_sec, &cleanupDm, mDebug)) { |
| Loop::destroyByDevice(loopDevice); |
| return -1; |
| } |
| |
| if (mkdir(mountPoint, 0000)) { |
| if (errno != EEXIST) { |
| SLOGE("Mountpoint creation failed (%s)", strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| return -1; |
| } |
| } |
| |
| /* |
| * Wait for the device mapper node to be created. |
| */ |
| waitForDevMapper(dmDevice); |
| |
| int result; |
| if (sb.c_opts & ASEC_SB_C_OPTS_EXT4) { |
| result = android::vold::ext4::Mount(dmDevice, mountPoint, |
| readOnly, false, readOnly); |
| } else { |
| result = android::vold::vfat::Mount(dmDevice, mountPoint, |
| readOnly, false, readOnly, ownerUid, 0, 0222, false); |
| } |
| |
| if (result) { |
| SLOGE("ASEC mount failed (%s)", strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| return -1; |
| } |
| |
| mActiveContainers->push_back(new ContainerData(strdup(id), ASEC)); |
| if (mDebug) { |
| SLOGD("ASEC %s mounted", id); |
| } |
| return 0; |
| } |
| |
| /** |
| * Mounts an image file <code>img</code>. |
| */ |
| int VolumeManager::mountObb(const char *img, const char *key, int ownerGid) { |
| char mountPoint[255]; |
| |
| char idHash[33]; |
| if (!asecHash(img, idHash, sizeof(idHash))) { |
| SLOGE("Hash of '%s' failed (%s)", img, strerror(errno)); |
| return -1; |
| } |
| |
| int written = snprintf(mountPoint, sizeof(mountPoint), "%s/%s", VolumeManager::LOOPDIR, idHash); |
| if ((written < 0) || (size_t(written) >= sizeof(mountPoint))) { |
| SLOGE("OBB mount failed for %s: couldn't construct mountpoint", img); |
| return -1; |
| } |
| |
| if (isMountpointMounted(mountPoint)) { |
| SLOGE("Image %s already mounted", img); |
| errno = EBUSY; |
| return -1; |
| } |
| |
| char loopDevice[255]; |
| if (setupLoopDevice(loopDevice, sizeof(loopDevice), img, idHash, mDebug)) |
| return -1; |
| |
| char dmDevice[255]; |
| bool cleanupDm = false; |
| int fd; |
| unsigned long nr_sec = 0; |
| |
| if ((fd = open(loopDevice, O_RDWR | O_CLOEXEC)) < 0) { |
| SLOGE("Failed to open loopdevice (%s)", strerror(errno)); |
| Loop::destroyByDevice(loopDevice); |
| return -1; |
| } |
| |
| get_blkdev_size(fd, &nr_sec); |
| if (nr_sec == 0) { |
| SLOGE("Failed to get loop size (%s)", strerror(errno)); |
| Loop::destroyByDevice(loopDevice); |
| close(fd); |
| return -1; |
| } |
| |
| close(fd); |
| |
| if (setupDevMapperDevice(dmDevice, sizeof(loopDevice), loopDevice, img,key, idHash, nr_sec, &cleanupDm, mDebug)) { |
| Loop::destroyByDevice(loopDevice); |
| return -1; |
| } |
| |
| if (mkdir(mountPoint, 0755)) { |
| if (errno != EEXIST) { |
| SLOGE("Mountpoint creation failed (%s)", strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| return -1; |
| } |
| } |
| |
| /* |
| * Wait for the device mapper node to be created. |
| */ |
| waitForDevMapper(dmDevice); |
| |
| if (android::vold::vfat::Mount(dmDevice, mountPoint, |
| true, false, true, 0, ownerGid, 0227, false)) { |
| SLOGE("Image mount failed (%s)", strerror(errno)); |
| if (cleanupDm) { |
| Devmapper::destroy(idHash); |
| } |
| Loop::destroyByDevice(loopDevice); |
| return -1; |
| } |
| |
| mActiveContainers->push_back(new ContainerData(strdup(img), OBB)); |
| if (mDebug) { |
| SLOGD("Image %s mounted", img); |
| } |
| return 0; |
| } |
| |
| int VolumeManager::listMountedObbs(SocketClient* cli) { |
| FILE *fp = setmntent("/proc/mounts", "r"); |
| if (fp == NULL) { |
| SLOGE("Error opening /proc/mounts (%s)", strerror(errno)); |
| return -1; |
| } |
| |
| // Create a string to compare against that has a trailing slash |
| int loopDirLen = strlen(VolumeManager::LOOPDIR); |
| char loopDir[loopDirLen + 2]; |
| strlcpy(loopDir, VolumeManager::LOOPDIR, sizeof(loopDir)); |
| loopDir[loopDirLen++] = '/'; |
| loopDir[loopDirLen] = '\0'; |
| |
| mntent* mentry; |
| while ((mentry = getmntent(fp)) != NULL) { |
| if (!strncmp(mentry->mnt_dir, loopDir, loopDirLen)) { |
| int fd = open(mentry->mnt_fsname, O_RDONLY | O_CLOEXEC); |
| if (fd >= 0) { |
| struct loop_info64 li; |
| if (ioctl(fd, LOOP_GET_STATUS64, &li) >= 0) { |
| cli->sendMsg(ResponseCode::AsecListResult, |
| (const char*) li.lo_file_name, false); |
| } |
| close(fd); |
| } |
| } |
| } |
| endmntent(fp); |
| return 0; |
| } |
| |
| extern "C" int vold_unmountAll(void) { |
| VolumeManager *vm = VolumeManager::Instance(); |
| return vm->unmountAll(); |
| } |
| |
| bool VolumeManager::isMountpointMounted(const char *mp) |
| { |
| FILE *fp = setmntent("/proc/mounts", "r"); |
| if (fp == NULL) { |
| SLOGE("Error opening /proc/mounts (%s)", strerror(errno)); |
| return false; |
| } |
| |
| bool found_mp = false; |
| mntent* mentry; |
| while ((mentry = getmntent(fp)) != NULL) { |
| if (strcmp(mentry->mnt_dir, mp) == 0) { |
| found_mp = true; |
| break; |
| } |
| } |
| endmntent(fp); |
| return found_mp; |
| } |
| |
| int VolumeManager::mkdirs(const char* path) { |
| // Only offer to create directories for paths managed by vold |
| if (strncmp(path, "/storage/", 9) == 0) { |
| // fs_mkdirs() does symlink checking and relative path enforcement |
| return fs_mkdirs(path, 0700); |
| } else { |
| SLOGE("Failed to find mounted volume for %s", path); |
| return -EINVAL; |
| } |
| } |
| |
| static size_t kAppFuseMaxMountPointName = 32; |
| |
| static android::status_t getMountPath(uid_t uid, const std::string& name, std::string* path) { |
| if (name.size() > kAppFuseMaxMountPointName) { |
| LOG(ERROR) << "AppFuse mount name is too long."; |
| return -EINVAL; |
| } |
| for (size_t i = 0; i < name.size(); i++) { |
| if (!isalnum(name[i])) { |
| LOG(ERROR) << "AppFuse mount name contains invalid character."; |
| return -EINVAL; |
| } |
| } |
| *path = android::base::StringPrintf("/mnt/appfuse/%d_%s", uid, name.c_str()); |
| return android::OK; |
| } |
| |
| static android::status_t mountInNamespace(uid_t uid, int device_fd, const std::string& path) { |
| // Remove existing mount. |
| android::vold::ForceUnmount(path); |
| |
| const auto opts = android::base::StringPrintf( |
| "fd=%i," |
| "rootmode=40000," |
| "default_permissions," |
| "allow_other," |
| "user_id=%d,group_id=%d," |
| "context=\"u:object_r:app_fuse_file:s0\"," |
| "fscontext=u:object_r:app_fusefs:s0", |
| device_fd, |
| uid, |
| uid); |
| |
| const int result = TEMP_FAILURE_RETRY(mount( |
| "/dev/fuse", path.c_str(), "fuse", |
| MS_NOSUID | MS_NODEV | MS_NOEXEC | MS_NOATIME, opts.c_str())); |
| if (result != 0) { |
| PLOG(ERROR) << "Failed to mount " << path; |
| return -errno; |
| } |
| |
| return android::OK; |
| } |
| |
| static android::status_t runCommandInNamespace(const std::string& command, |
| uid_t uid, |
| pid_t pid, |
| const std::string& path, |
| int device_fd) { |
| if (DEBUG_APPFUSE) { |
| LOG(DEBUG) << "Run app fuse command " << command << " for the path " << path |
| << " in namespace " << uid; |
| } |
| |
| unique_fd dir(open("/proc", O_RDONLY | O_DIRECTORY | O_CLOEXEC)); |
| if (dir.get() == -1) { |
| PLOG(ERROR) << "Failed to open /proc"; |
| return -errno; |
| } |
| |
| // Obtains process file descriptor. |
| const std::string pid_str = android::base::StringPrintf("%d", pid); |
| const unique_fd pid_fd( |
| openat(dir.get(), pid_str.c_str(), O_RDONLY | O_DIRECTORY | O_CLOEXEC)); |
| if (pid_fd.get() == -1) { |
| PLOG(ERROR) << "Failed to open /proc/" << pid; |
| return -errno; |
| } |
| |
| // Check UID of process. |
| { |
| struct stat sb; |
| const int result = fstat(pid_fd.get(), &sb); |
| if (result == -1) { |
| PLOG(ERROR) << "Failed to stat /proc/" << pid; |
| return -errno; |
| } |
| if (sb.st_uid != AID_SYSTEM) { |
| LOG(ERROR) << "Only system can mount appfuse. UID expected=" << AID_SYSTEM |
| << ", actual=" << sb.st_uid; |
| return -EPERM; |
| } |
| } |
| |
| // Matches so far, but refuse to touch if in root namespace |
| { |
| char rootName[PATH_MAX]; |
| char pidName[PATH_MAX]; |
| const int root_result = |
| android::vold::SaneReadLinkAt(dir.get(), "1/ns/mnt", rootName, PATH_MAX); |
| const int pid_result = |
| android::vold::SaneReadLinkAt(pid_fd.get(), "ns/mnt", pidName, PATH_MAX); |
| if (root_result == -1) { |
| LOG(ERROR) << "Failed to readlink for /proc/1/ns/mnt"; |
| return -EPERM; |
| } |
| if (pid_result == -1) { |
| LOG(ERROR) << "Failed to readlink for /proc/" << pid << "/ns/mnt"; |
| return -EPERM; |
| } |
| if (!strcmp(rootName, pidName)) { |
| LOG(ERROR) << "Don't mount appfuse in root namespace"; |
| return -EPERM; |
| } |
| } |
| |
| // We purposefully leave the namespace open across the fork |
| unique_fd ns_fd(openat(pid_fd.get(), "ns/mnt", O_RDONLY)); // not O_CLOEXEC |
| if (ns_fd.get() < 0) { |
| PLOG(ERROR) << "Failed to open namespace for /proc/" << pid << "/ns/mnt"; |
| return -errno; |
| } |
| |
| int child = fork(); |
| if (child == 0) { |
| if (setns(ns_fd.get(), CLONE_NEWNS) != 0) { |
| PLOG(ERROR) << "Failed to setns"; |
| _exit(-errno); |
| } |
| |
| if (command == "mount") { |
| _exit(mountInNamespace(uid, device_fd, path)); |
| } else if (command == "unmount") { |
| // If it's just after all FD opened on mount point are closed, umount2 can fail with |
| // EBUSY. To avoid the case, specify MNT_DETACH. |
| if (umount2(path.c_str(), UMOUNT_NOFOLLOW | MNT_DETACH) != 0 && |
| errno != EINVAL && errno != ENOENT) { |
| PLOG(ERROR) << "Failed to unmount directory."; |
| _exit(-errno); |
| } |
| if (rmdir(path.c_str()) != 0) { |
| PLOG(ERROR) << "Failed to remove the mount directory."; |
| _exit(-errno); |
| } |
| _exit(android::OK); |
| } else { |
| LOG(ERROR) << "Unknown appfuse command " << command; |
| _exit(-EPERM); |
| } |
| } |
| |
| if (child == -1) { |
| PLOG(ERROR) << "Failed to folk child process"; |
| return -errno; |
| } |
| |
| android::status_t status; |
| TEMP_FAILURE_RETRY(waitpid(child, &status, 0)); |
| |
| return status; |
| } |
| |
| int VolumeManager::createObb(const std::string& sourcePath, const std::string& sourceKey, |
| int32_t ownerGid, std::string* outVolId) { |
| int id = mNextObbId++; |
| |
| auto vol = std::shared_ptr<android::vold::VolumeBase>( |
| new android::vold::ObbVolume(id, sourcePath, sourceKey, ownerGid)); |
| vol->create(); |
| |
| mObbVolumes.push_back(vol); |
| *outVolId = vol->getId(); |
| return android::OK; |
| } |
| |
| int VolumeManager::destroyObb(const std::string& volId) { |
| auto i = mObbVolumes.begin(); |
| while (i != mObbVolumes.end()) { |
| if ((*i)->getId() == volId) { |
| (*i)->destroy(); |
| i = mObbVolumes.erase(i); |
| } else { |
| ++i; |
| } |
| } |
| return android::OK; |
| } |
| |
| int VolumeManager::mountAppFuse(uid_t uid, pid_t pid, int mountId, |
| android::base::unique_fd* device_fd) { |
| std::string name = std::to_string(mountId); |
| |
| // Check mount point name. |
| std::string path; |
| if (getMountPath(uid, name, &path) != android::OK) { |
| LOG(ERROR) << "Invalid mount point name"; |
| return -1; |
| } |
| |
| // Create directories. |
| const android::status_t result = android::vold::PrepareDir(path, 0700, 0, 0); |
| if (result != android::OK) { |
| PLOG(ERROR) << "Failed to prepare directory " << path; |
| return -1; |
| } |
| |
| // Open device FD. |
| device_fd->reset(open("/dev/fuse", O_RDWR)); // not O_CLOEXEC |
| if (device_fd->get() == -1) { |
| PLOG(ERROR) << "Failed to open /dev/fuse"; |
| return -1; |
| } |
| |
| // Mount. |
| return runCommandInNamespace("mount", uid, pid, path, device_fd->get()); |
| } |
| |
| int VolumeManager::unmountAppFuse(uid_t uid, pid_t pid, int mountId) { |
| std::string name = std::to_string(mountId); |
| |
| // Check mount point name. |
| std::string path; |
| if (getMountPath(uid, name, &path) != android::OK) { |
| LOG(ERROR) << "Invalid mount point name"; |
| return -1; |
| } |
| |
| return runCommandInNamespace("unmount", uid, pid, path, -1 /* device_fd */); |
| } |