| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "EncryptInplace.h" |
| |
| #include <stdio.h> |
| #include <stdint.h> |
| #include <stdbool.h> |
| #include <inttypes.h> |
| #include <time.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <ext4_utils/ext4.h> |
| #include <ext4_utils/ext4_utils.h> |
| #include <f2fs_sparseblock.h> |
| |
| #include <algorithm> |
| |
| #include "cutils/properties.h" |
| #define LOG_TAG "EncryptInplace" |
| #include "cutils/log.h" |
| #include "CheckBattery.h" |
| |
| // HORRIBLE HACK, FIXME |
| #include "cryptfs.h" |
| |
| // FIXME horrible cut-and-paste code |
| static inline int unix_read(int fd, void* buff, int len) |
| { |
| return TEMP_FAILURE_RETRY(read(fd, buff, len)); |
| } |
| |
| static inline int unix_write(int fd, const void* buff, int len) |
| { |
| return TEMP_FAILURE_RETRY(write(fd, buff, len)); |
| } |
| |
| #define CRYPT_SECTORS_PER_BUFSIZE (CRYPT_INPLACE_BUFSIZE / CRYPT_SECTOR_SIZE) |
| |
| /* aligned 32K writes tends to make flash happy. |
| * SD card association recommends it. |
| */ |
| #ifndef CONFIG_HW_DISK_ENCRYPTION |
| #define BLOCKS_AT_A_TIME 8 |
| #else |
| #define BLOCKS_AT_A_TIME 1024 |
| #endif |
| |
| struct encryptGroupsData |
| { |
| int realfd; |
| int cryptofd; |
| off64_t numblocks; |
| off64_t one_pct, cur_pct, new_pct; |
| off64_t blocks_already_done, tot_numblocks; |
| off64_t used_blocks_already_done, tot_used_blocks; |
| char* real_blkdev, * crypto_blkdev; |
| int count; |
| off64_t offset; |
| char* buffer; |
| off64_t last_written_sector; |
| int completed; |
| time_t time_started; |
| int remaining_time; |
| }; |
| |
| static void update_progress(struct encryptGroupsData* data, int is_used) |
| { |
| data->blocks_already_done++; |
| |
| if (is_used) { |
| data->used_blocks_already_done++; |
| } |
| if (data->tot_used_blocks) { |
| data->new_pct = data->used_blocks_already_done / data->one_pct; |
| } else { |
| data->new_pct = data->blocks_already_done / data->one_pct; |
| } |
| |
| if (data->new_pct > data->cur_pct) { |
| char buf[8]; |
| data->cur_pct = data->new_pct; |
| snprintf(buf, sizeof(buf), "%" PRId64, data->cur_pct); |
| property_set("vold.encrypt_progress", buf); |
| } |
| |
| if (data->cur_pct >= 5) { |
| struct timespec time_now; |
| if (clock_gettime(CLOCK_MONOTONIC, &time_now)) { |
| SLOGW("Error getting time"); |
| } else { |
| double elapsed_time = difftime(time_now.tv_sec, data->time_started); |
| off64_t remaining_blocks = data->tot_used_blocks |
| - data->used_blocks_already_done; |
| int remaining_time = (int)(elapsed_time * remaining_blocks |
| / data->used_blocks_already_done); |
| |
| // Change time only if not yet set, lower, or a lot higher for |
| // best user experience |
| if (data->remaining_time == -1 |
| || remaining_time < data->remaining_time |
| || remaining_time > data->remaining_time + 60) { |
| char buf[8]; |
| snprintf(buf, sizeof(buf), "%d", remaining_time); |
| property_set("vold.encrypt_time_remaining", buf); |
| data->remaining_time = remaining_time; |
| } |
| } |
| } |
| } |
| |
| static void log_progress(struct encryptGroupsData const* data, bool completed) |
| { |
| // Precondition - if completed data = 0 else data != 0 |
| |
| // Track progress so we can skip logging blocks |
| static off64_t offset = -1; |
| |
| // Need to close existing 'Encrypting from' log? |
| if (completed || (offset != -1 && data->offset != offset)) { |
| SLOGI("Encrypted to sector %" PRId64, |
| offset / info.block_size * CRYPT_SECTOR_SIZE); |
| offset = -1; |
| } |
| |
| // Need to start new 'Encrypting from' log? |
| if (!completed && offset != data->offset) { |
| SLOGI("Encrypting from sector %" PRId64, |
| data->offset / info.block_size * CRYPT_SECTOR_SIZE); |
| } |
| |
| // Update offset |
| if (!completed) { |
| offset = data->offset + (off64_t)data->count * info.block_size; |
| } |
| } |
| |
| static int flush_outstanding_data(struct encryptGroupsData* data) |
| { |
| if (data->count == 0) { |
| return 0; |
| } |
| |
| SLOGV("Copying %d blocks at offset %" PRIx64, data->count, data->offset); |
| |
| if (pread64(data->realfd, data->buffer, |
| info.block_size * data->count, data->offset) |
| <= 0) { |
| SLOGE("Error reading real_blkdev %s for inplace encrypt", |
| data->real_blkdev); |
| return -1; |
| } |
| |
| if (pwrite64(data->cryptofd, data->buffer, |
| info.block_size * data->count, data->offset) |
| <= 0) { |
| SLOGE("Error writing crypto_blkdev %s for inplace encrypt", |
| data->crypto_blkdev); |
| return -1; |
| } else { |
| log_progress(data, false); |
| } |
| |
| data->count = 0; |
| data->last_written_sector = (data->offset + data->count) |
| / info.block_size * CRYPT_SECTOR_SIZE - 1; |
| return 0; |
| } |
| |
| static int encrypt_groups(struct encryptGroupsData* data) |
| { |
| unsigned int i; |
| u8 *block_bitmap = 0; |
| unsigned int block; |
| off64_t ret; |
| int rc = -1; |
| |
| data->buffer = (char*) malloc(info.block_size * BLOCKS_AT_A_TIME); |
| if (!data->buffer) { |
| SLOGE("Failed to allocate crypto buffer"); |
| goto errout; |
| } |
| |
| block_bitmap = (u8*) malloc(info.block_size); |
| if (!block_bitmap) { |
| SLOGE("failed to allocate block bitmap"); |
| goto errout; |
| } |
| |
| for (i = 0; i < aux_info.groups; ++i) { |
| SLOGI("Encrypting group %d", i); |
| |
| u32 first_block = aux_info.first_data_block + i * info.blocks_per_group; |
| u32 block_count = std::min(info.blocks_per_group, |
| (u32)(aux_info.len_blocks - first_block)); |
| |
| off64_t offset = (u64)info.block_size |
| * aux_info.bg_desc[i].bg_block_bitmap; |
| |
| ret = pread64(data->realfd, block_bitmap, info.block_size, offset); |
| if (ret != (int)info.block_size) { |
| SLOGE("failed to read all of block group bitmap %d", i); |
| goto errout; |
| } |
| |
| offset = (u64)info.block_size * first_block; |
| |
| data->count = 0; |
| |
| for (block = 0; block < block_count; block++) { |
| int used = (aux_info.bg_desc[i].bg_flags & EXT4_BG_BLOCK_UNINIT) ? |
| 0 : bitmap_get_bit(block_bitmap, block); |
| update_progress(data, used); |
| if (used) { |
| if (data->count == 0) { |
| data->offset = offset; |
| } |
| data->count++; |
| } else { |
| if (flush_outstanding_data(data)) { |
| goto errout; |
| } |
| } |
| |
| offset += info.block_size; |
| |
| /* Write data if we are aligned or buffer size reached */ |
| if (offset % (info.block_size * BLOCKS_AT_A_TIME) == 0 |
| || data->count == BLOCKS_AT_A_TIME) { |
| if (flush_outstanding_data(data)) { |
| goto errout; |
| } |
| } |
| |
| if (!is_battery_ok_to_continue()) { |
| SLOGE("Stopping encryption due to low battery"); |
| rc = 0; |
| goto errout; |
| } |
| |
| } |
| if (flush_outstanding_data(data)) { |
| goto errout; |
| } |
| } |
| |
| data->completed = 1; |
| rc = 0; |
| |
| errout: |
| log_progress(0, true); |
| free(data->buffer); |
| free(block_bitmap); |
| return rc; |
| } |
| |
| static int cryptfs_enable_inplace_ext4(char *crypto_blkdev, |
| char *real_blkdev, |
| off64_t size, |
| off64_t *size_already_done, |
| off64_t tot_size, |
| off64_t previously_encrypted_upto) |
| { |
| u32 i; |
| struct encryptGroupsData data; |
| int rc; // Can't initialize without causing warning -Wclobbered |
| int retries = RETRY_MOUNT_ATTEMPTS; |
| struct timespec time_started = {0}; |
| |
| if (previously_encrypted_upto > *size_already_done) { |
| SLOGD("Not fast encrypting since resuming part way through"); |
| return -1; |
| } |
| |
| memset(&data, 0, sizeof(data)); |
| data.real_blkdev = real_blkdev; |
| data.crypto_blkdev = crypto_blkdev; |
| |
| if ( (data.realfd = open(real_blkdev, O_RDWR|O_CLOEXEC)) < 0) { |
| SLOGE("Error opening real_blkdev %s for inplace encrypt. err=%d(%s)\n", |
| real_blkdev, errno, strerror(errno)); |
| rc = -1; |
| goto errout; |
| } |
| |
| // Wait until the block device appears. Re-use the mount retry values since it is reasonable. |
| while ((data.cryptofd = open(crypto_blkdev, O_WRONLY|O_CLOEXEC)) < 0) { |
| if (--retries) { |
| SLOGE("Error opening crypto_blkdev %s for ext4 inplace encrypt. err=%d(%s), retrying\n", |
| crypto_blkdev, errno, strerror(errno)); |
| sleep(RETRY_MOUNT_DELAY_SECONDS); |
| } else { |
| SLOGE("Error opening crypto_blkdev %s for ext4 inplace encrypt. err=%d(%s)\n", |
| crypto_blkdev, errno, strerror(errno)); |
| rc = ENABLE_INPLACE_ERR_DEV; |
| goto errout; |
| } |
| } |
| |
| if (setjmp(setjmp_env)) { // NOLINT |
| SLOGE("Reading ext4 extent caused an exception\n"); |
| rc = -1; |
| goto errout; |
| } |
| |
| if (read_ext(data.realfd, 0) != 0) { |
| SLOGE("Failed to read ext4 extent\n"); |
| rc = -1; |
| goto errout; |
| } |
| |
| data.numblocks = size / CRYPT_SECTORS_PER_BUFSIZE; |
| data.tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE; |
| data.blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE; |
| |
| SLOGI("Encrypting ext4 filesystem in place..."); |
| |
| data.tot_used_blocks = data.numblocks; |
| for (i = 0; i < aux_info.groups; ++i) { |
| data.tot_used_blocks -= aux_info.bg_desc[i].bg_free_blocks_count; |
| } |
| |
| data.one_pct = data.tot_used_blocks / 100; |
| data.cur_pct = 0; |
| |
| if (clock_gettime(CLOCK_MONOTONIC, &time_started)) { |
| SLOGW("Error getting time at start"); |
| // Note - continue anyway - we'll run with 0 |
| } |
| data.time_started = time_started.tv_sec; |
| data.remaining_time = -1; |
| |
| rc = encrypt_groups(&data); |
| if (rc) { |
| SLOGE("Error encrypting groups"); |
| goto errout; |
| } |
| |
| *size_already_done += data.completed ? size : data.last_written_sector; |
| rc = 0; |
| |
| errout: |
| close(data.realfd); |
| close(data.cryptofd); |
| |
| return rc; |
| } |
| |
| static void log_progress_f2fs(u64 block, bool completed) |
| { |
| // Precondition - if completed data = 0 else data != 0 |
| |
| // Track progress so we can skip logging blocks |
| static u64 last_block = (u64)-1; |
| |
| // Need to close existing 'Encrypting from' log? |
| if (completed || (last_block != (u64)-1 && block != last_block + 1)) { |
| SLOGI("Encrypted to block %" PRId64, last_block); |
| last_block = -1; |
| } |
| |
| // Need to start new 'Encrypting from' log? |
| if (!completed && (last_block == (u64)-1 || block != last_block + 1)) { |
| SLOGI("Encrypting from block %" PRId64, block); |
| } |
| |
| // Update offset |
| if (!completed) { |
| last_block = block; |
| } |
| } |
| |
| static int encrypt_one_block_f2fs(u64 pos, void *data) |
| { |
| struct encryptGroupsData *priv_dat = (struct encryptGroupsData *)data; |
| |
| priv_dat->blocks_already_done = pos - 1; |
| update_progress(priv_dat, 1); |
| |
| off64_t offset = pos * CRYPT_INPLACE_BUFSIZE; |
| |
| if (pread64(priv_dat->realfd, priv_dat->buffer, CRYPT_INPLACE_BUFSIZE, offset) <= 0) { |
| SLOGE("Error reading real_blkdev %s for f2fs inplace encrypt", priv_dat->crypto_blkdev); |
| return -1; |
| } |
| |
| if (pwrite64(priv_dat->cryptofd, priv_dat->buffer, CRYPT_INPLACE_BUFSIZE, offset) <= 0) { |
| SLOGE("Error writing crypto_blkdev %s for f2fs inplace encrypt", priv_dat->crypto_blkdev); |
| return -1; |
| } else { |
| log_progress_f2fs(pos, false); |
| } |
| |
| return 0; |
| } |
| |
| static int cryptfs_enable_inplace_f2fs(char *crypto_blkdev, |
| char *real_blkdev, |
| off64_t size, |
| off64_t *size_already_done, |
| off64_t tot_size, |
| off64_t previously_encrypted_upto) |
| { |
| struct encryptGroupsData data; |
| struct f2fs_info *f2fs_info = NULL; |
| int rc = ENABLE_INPLACE_ERR_OTHER; |
| if (previously_encrypted_upto > *size_already_done) { |
| SLOGD("Not fast encrypting since resuming part way through"); |
| return ENABLE_INPLACE_ERR_OTHER; |
| } |
| memset(&data, 0, sizeof(data)); |
| data.real_blkdev = real_blkdev; |
| data.crypto_blkdev = crypto_blkdev; |
| data.realfd = -1; |
| data.cryptofd = -1; |
| if ( (data.realfd = open64(real_blkdev, O_RDWR|O_CLOEXEC)) < 0) { |
| SLOGE("Error opening real_blkdev %s for f2fs inplace encrypt\n", |
| real_blkdev); |
| goto errout; |
| } |
| if ( (data.cryptofd = open64(crypto_blkdev, O_WRONLY|O_CLOEXEC)) < 0) { |
| SLOGE("Error opening crypto_blkdev %s for f2fs inplace encrypt. err=%d(%s)\n", |
| crypto_blkdev, errno, strerror(errno)); |
| rc = ENABLE_INPLACE_ERR_DEV; |
| goto errout; |
| } |
| |
| f2fs_info = generate_f2fs_info(data.realfd); |
| if (!f2fs_info) |
| goto errout; |
| |
| data.numblocks = size / CRYPT_SECTORS_PER_BUFSIZE; |
| data.tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE; |
| data.blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE; |
| |
| data.tot_used_blocks = get_num_blocks_used(f2fs_info); |
| |
| data.one_pct = data.tot_used_blocks / 100; |
| data.cur_pct = 0; |
| data.time_started = time(NULL); |
| data.remaining_time = -1; |
| |
| data.buffer = (char*) malloc(f2fs_info->block_size); |
| if (!data.buffer) { |
| SLOGE("Failed to allocate crypto buffer"); |
| goto errout; |
| } |
| |
| data.count = 0; |
| |
| /* Currently, this either runs to completion, or hits a nonrecoverable error */ |
| rc = run_on_used_blocks(data.blocks_already_done, f2fs_info, &encrypt_one_block_f2fs, &data); |
| |
| if (rc) { |
| SLOGE("Error in running over f2fs blocks"); |
| rc = ENABLE_INPLACE_ERR_OTHER; |
| goto errout; |
| } |
| |
| *size_already_done += size; |
| rc = 0; |
| |
| errout: |
| if (rc) |
| SLOGE("Failed to encrypt f2fs filesystem on %s", real_blkdev); |
| |
| log_progress_f2fs(0, true); |
| free(f2fs_info); |
| free(data.buffer); |
| close(data.realfd); |
| close(data.cryptofd); |
| |
| return rc; |
| } |
| |
| static int cryptfs_enable_inplace_full(char *crypto_blkdev, char *real_blkdev, |
| off64_t size, off64_t *size_already_done, |
| off64_t tot_size, |
| off64_t previously_encrypted_upto) |
| { |
| int realfd, cryptofd; |
| char *buf[CRYPT_INPLACE_BUFSIZE]; |
| int rc = ENABLE_INPLACE_ERR_OTHER; |
| off64_t numblocks, i, remainder; |
| off64_t one_pct, cur_pct, new_pct; |
| off64_t blocks_already_done, tot_numblocks; |
| |
| if ( (realfd = open(real_blkdev, O_RDONLY|O_CLOEXEC)) < 0) { |
| SLOGE("Error opening real_blkdev %s for inplace encrypt\n", real_blkdev); |
| return ENABLE_INPLACE_ERR_OTHER; |
| } |
| |
| if ( (cryptofd = open(crypto_blkdev, O_WRONLY|O_CLOEXEC)) < 0) { |
| SLOGE("Error opening crypto_blkdev %s for inplace encrypt. err=%d(%s)\n", |
| crypto_blkdev, errno, strerror(errno)); |
| close(realfd); |
| return ENABLE_INPLACE_ERR_DEV; |
| } |
| |
| /* This is pretty much a simple loop of reading 4K, and writing 4K. |
| * The size passed in is the number of 512 byte sectors in the filesystem. |
| * So compute the number of whole 4K blocks we should read/write, |
| * and the remainder. |
| */ |
| numblocks = size / CRYPT_SECTORS_PER_BUFSIZE; |
| remainder = size % CRYPT_SECTORS_PER_BUFSIZE; |
| tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE; |
| blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE; |
| |
| SLOGE("Encrypting filesystem in place..."); |
| |
| i = previously_encrypted_upto + 1 - *size_already_done; |
| |
| if (lseek64(realfd, i * CRYPT_SECTOR_SIZE, SEEK_SET) < 0) { |
| SLOGE("Cannot seek to previously encrypted point on %s", real_blkdev); |
| goto errout; |
| } |
| |
| if (lseek64(cryptofd, i * CRYPT_SECTOR_SIZE, SEEK_SET) < 0) { |
| SLOGE("Cannot seek to previously encrypted point on %s", crypto_blkdev); |
| goto errout; |
| } |
| |
| for (;i < size && i % CRYPT_SECTORS_PER_BUFSIZE != 0; ++i) { |
| if (unix_read(realfd, buf, CRYPT_SECTOR_SIZE) <= 0) { |
| SLOGE("Error reading initial sectors from real_blkdev %s for " |
| "inplace encrypt\n", crypto_blkdev); |
| goto errout; |
| } |
| if (unix_write(cryptofd, buf, CRYPT_SECTOR_SIZE) <= 0) { |
| SLOGE("Error writing initial sectors to crypto_blkdev %s for " |
| "inplace encrypt\n", crypto_blkdev); |
| goto errout; |
| } else { |
| SLOGI("Encrypted 1 block at %" PRId64, i); |
| } |
| } |
| |
| one_pct = tot_numblocks / 100; |
| cur_pct = 0; |
| /* process the majority of the filesystem in blocks */ |
| for (i/=CRYPT_SECTORS_PER_BUFSIZE; i<numblocks; i++) { |
| new_pct = (i + blocks_already_done) / one_pct; |
| if (new_pct > cur_pct) { |
| char buf[8]; |
| |
| cur_pct = new_pct; |
| snprintf(buf, sizeof(buf), "%" PRId64, cur_pct); |
| property_set("vold.encrypt_progress", buf); |
| } |
| if (unix_read(realfd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) { |
| SLOGE("Error reading real_blkdev %s for inplace encrypt", crypto_blkdev); |
| goto errout; |
| } |
| if (unix_write(cryptofd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) { |
| SLOGE("Error writing crypto_blkdev %s for inplace encrypt", crypto_blkdev); |
| goto errout; |
| } else { |
| SLOGD("Encrypted %d block at %" PRId64, |
| CRYPT_SECTORS_PER_BUFSIZE, |
| i * CRYPT_SECTORS_PER_BUFSIZE); |
| } |
| |
| if (!is_battery_ok_to_continue()) { |
| SLOGE("Stopping encryption due to low battery"); |
| *size_already_done += (i + 1) * CRYPT_SECTORS_PER_BUFSIZE - 1; |
| rc = 0; |
| goto errout; |
| } |
| } |
| |
| /* Do any remaining sectors */ |
| for (i=0; i<remainder; i++) { |
| if (unix_read(realfd, buf, CRYPT_SECTOR_SIZE) <= 0) { |
| SLOGE("Error reading final sectors from real_blkdev %s for inplace encrypt", crypto_blkdev); |
| goto errout; |
| } |
| if (unix_write(cryptofd, buf, CRYPT_SECTOR_SIZE) <= 0) { |
| SLOGE("Error writing final sectors to crypto_blkdev %s for inplace encrypt", crypto_blkdev); |
| goto errout; |
| } else { |
| SLOGI("Encrypted 1 block at next location"); |
| } |
| } |
| |
| *size_already_done += size; |
| rc = 0; |
| |
| errout: |
| close(realfd); |
| close(cryptofd); |
| |
| return rc; |
| } |
| |
| /* returns on of the ENABLE_INPLACE_* return codes */ |
| int cryptfs_enable_inplace(char *crypto_blkdev, char *real_blkdev, |
| off64_t size, off64_t *size_already_done, |
| off64_t tot_size, |
| off64_t previously_encrypted_upto) |
| { |
| int rc_ext4, rc_f2fs, rc_full; |
| if (previously_encrypted_upto) { |
| SLOGD("Continuing encryption from %" PRId64, previously_encrypted_upto); |
| } |
| |
| if (*size_already_done + size < previously_encrypted_upto) { |
| *size_already_done += size; |
| return 0; |
| } |
| |
| /* TODO: identify filesystem type. |
| * As is, cryptfs_enable_inplace_ext4 will fail on an f2fs partition, and |
| * then we will drop down to cryptfs_enable_inplace_f2fs. |
| * */ |
| if ((rc_ext4 = cryptfs_enable_inplace_ext4(crypto_blkdev, real_blkdev, |
| size, size_already_done, |
| tot_size, previously_encrypted_upto)) == 0) { |
| return 0; |
| } |
| SLOGD("cryptfs_enable_inplace_ext4()=%d\n", rc_ext4); |
| |
| if ((rc_f2fs = cryptfs_enable_inplace_f2fs(crypto_blkdev, real_blkdev, |
| size, size_already_done, |
| tot_size, previously_encrypted_upto)) == 0) { |
| return 0; |
| } |
| SLOGD("cryptfs_enable_inplace_f2fs()=%d\n", rc_f2fs); |
| |
| rc_full = cryptfs_enable_inplace_full(crypto_blkdev, real_blkdev, |
| size, size_already_done, tot_size, |
| previously_encrypted_upto); |
| SLOGD("cryptfs_enable_inplace_full()=%d\n", rc_full); |
| |
| /* Hack for b/17898962, the following is the symptom... */ |
| if (rc_ext4 == ENABLE_INPLACE_ERR_DEV |
| && rc_f2fs == ENABLE_INPLACE_ERR_DEV |
| && rc_full == ENABLE_INPLACE_ERR_DEV) { |
| return ENABLE_INPLACE_ERR_DEV; |
| } |
| return rc_full; |
| } |